TM TND TM 760
TM TND 760
Features Truck-specific routing Turn-by-turn routing Multi-stop routing optimization Automatic re-routing Turn-by-turn voice guidance Truck-specific routing based on your truck length, height and width, and load type. Notification of upcoming left and right turns, street names, lane guidance, distance to turn, and side of street of destination. Routing optimization up to 50 stops and ability to preview the entire route at a highway level. Immediate re-routing when drivers deviate from a designated route. Re-routing can be paused and then resumed later, reducing unnecessary voice and direction activity. Spoken, turn-by-turn voice directions aimed at minimizing driver distraction. Fleet-configured route destination Push a route destination (address & lat/long coordinate) from fleet manager to the driver. Multiple options for finding a destination Driver alerts Speed warning system Find a destination by address, zip code, intersection, or latitude/longitude. Audible warnings of upcoming sharp curves, steep hills, state boundaries, tolls, and speed limit and time zone changes. Voice notification when speed limit changes occur and when drivers exceed the posted speed limit. Junction View with Lane Assist Manage complex interchanges in 3D. Bread-crumb trails Option to record and replay routes driven. Ideal for driving off-road or through distribution centers. Avoid and prefer roads Truck and driver-specific Points of Interest Truckers Friend National Truck Stop Directory TruckDown Exits Quick View Am I close? Mile markers displayed along route Virtual dashboard Cross-reference to Rand McNally s Motor Carriers Road Atlas Multiple languages supported Save detours, avoidance of road segments, and receipt of warnings for upcoming hazards. Millions of POI listings and detailed information on truck stops, overnight parking, dining options, and more. Detailed information on thousands of truck stops, weigh stations & rest areas. Find truck washes, truck repair, towing and service locations. Information about truck-friendly locations off the upcoming exits along your route. Dynamic street address information that appears as you approach your destination. View current location by mile marker. At-a-glance access to metrics that help monitor progress and productivity including sunrise or sunset, altitude, percentage of trip completed, current speed, posted speed limit, odometer and more. Easy reference where you can find corresponding map data in your paper atlas. User interface and voice guidance in English, Spanish and French. Rand McNally s IntelliRoute navigation application is available on both the TND 760 and TPC 7600 in-cab devices. TRUCK DATA
Rand McNally Connect Services Portal Rand McNally Connect Services Portal is the web-based command center behind all of Rand McNally s mobile communications solutions. Dashboard Screen Map View & Vehicle Search Window Deceleration Report & Critical Event Reconstruction Polygonal Geofence Vehicle Performance Summary Report Rand McNally Connect Services Portal displays detailed driver and vehicle performance metrics via dashboards, mapping, and reporting. It enables managers to communicate with their drivers and provides them with the real-time and historic information needed to improve compliance, safety and fuel efficiency, reducing expenses and maximizing productivity.
Rand McNally Connect Services Portal Features Fleet Performance Analytics Fleet-wide dashboard Provides fleet managers at-a-glance charts and graphs showing critical metrics and trends, searchable by fleet or group. Fleet-configured overspeed reporting Speed band-based reporting Idle reporting Critical event reconstruction Cruise control reporting State mileage reporting Miles per Gallon reporting Text message & email performance alerts User-configurable & exception-based reporting More than 200 distinct vehicle metrics Download reports to spreadsheets Speed reports based on the fleet-configurable maximum speed. View data based on speed ranges (i.e. 58-62 MPH), including engine time, miles, hard brake count and fuel consumption. Driver and vehicle-specific idle times and percentages. Specific second-by-second analysis of potential accidents and their locations, graphically showing vehicle speed, RPM, brake, and throttle data. Driver and vehicle-specific cruise control miles, times, and a percentage breakdown of use. State-by-state breakdowns of vehicle miles and fuel consumption for fuel tax reporting. Driver and vehicle-specific data on fuel consumption while driving or idling, including driving and idling miles per gallon, fuel consumption by speed range. Text message & email alerts for Hours of Service violations, over fleet speed events, over RPM events, excessive idling, and rapid deceleration. View only the data you really need to see by adding customizable fields and filters for any driver or vehicle performance report. Comprehensive data on every vehicle s performance, fuel & mileage, speed, engine load, RPM, vehicle diagnostic faults, environmental elements, regional fuel, and more. Easy downloading of all reports to the back-office. Mapping Location data searchable by driver & vehicle Map proximity search Configurable map display Fleet-configured route destination Map bread-crumb trails Polygonal & route geofencing Upload landmarks/points of Interest Vehicle arrive/depart & detention reporting Vehicle fault code visibility Text message & email arrive/depart alerts Role-based login hierarchy Find a specific driver or vehicle on the map based on real-time location. Pinpoint real-time location of drivers & vehicles on the map based on proximity to a selected zip code, address, landmark, or any point on the map. Standard map view, satellite view, topographic and hybrid view (standard road names overlayed on satellite view). Integrate driver s stop assignments into daily Workflow via third-party application. Replay a driver or vehicle bread-crumb trail for a specified period of time. Displays bread-crumbs based on order traveled, color-coded based on position updates, hard brakes and idling events, and cardinal direction of travel for each bread-crumb. Create and save polygonal geofences for terminals, customer locations, and more. Create and save route geofences for monitoring and curbing out-of-route driving. Add a customized list of map landmarks for terminals, customer locations, and more. Can be organized by group. Displays vehicles and locations from which they have arrived and departed, as well as detention times within geofences. Can be configured for a geofence group based on customer locations & groupings. Real-time notification of vehicle maintenance issues as they happen. Text message & email alerts for geofence duration, and geofence-triggered arrival & departure. Various levels of access and editing abilities for administrators, safety managers, dispatchers, and more. To learn more about Rand McNally Connect Services Portal and request a quote Call 1-800-641-RAND (7263) or visit randmcnally.com/fleet 2012 Rand McNally. All rights reserved. Rand McNally, IntelliRoute are registered trademarks and TND and the arrow design mark are trademarks of RM Acquisition, LLC d/b/a Rand McNally. 2011 NAVTEQ. NAVTEQ ON BOARD is a trademark of NAVTEQ. TRUCK DATA
Third-Party Application
Integration Modules Position updates Form messages with Form Sync Workflow Navigation Automated arrival & departure notifications Hours of Service Vehicle Inspection Report Driver & vehicle performance Delivery Methods Flexible Interface Module Connect SDK Share GPS position data & vehicle events such as speeding, idling & hard brakes in near real-time with third-party applications. Two-way communication & position data is exchanged between the Rand McNally in-cab device and the third-party application. Consolidate all driver trip information into a single task list format. Includes stops, route information and required form messages. Integrate driver s stop assignments into daily Workflow via third-party application. Rand McNally Connect obtains trip and location-specific data from the third-party application to generate geofences around relevant locations. Notifications are sent to the third-party application when vehicles arrive & depart geofenced locations. Integrate relevant driver Hours of Service data, including current duty status and day & week duty status timers, into a third-party application. Vehicle Inspection Report information including driver compliance, defects and maintenance issues, is sent to the third-party application. Driver & vehicle performance metrics are sent to the third-party application. Includes metrics such as fuel usage, miles driven, cruise control usage, hard braking events, speeding, and event data. A quick & simple method of integration that utilizes flat file transfers or direct database integrations. Also useful for archiving data. A robust library of standard APIs allow for highly customizable integration to third-party applications.
Compliance Electronic Hours of Service and Vehicle Inspection Reporting solutions 8-Day Duty Status Summary Daily Log Graph HOS Summary & Timers Vehicle Inspection Report HOS Drive-Safe Mode When fleets invest in a compliance solution their drivers actually like using, fleets realize their ROI almost immediately. With Rand McNally s suite of compliance solutions, drivers benefit from an accurate, time-saving tool that helps them streamline their daily tasks, while fleets benefit from improved CSA scores, reduced paper log book expenses, and simplified, digital recordkeeping.
Compliance Features 395.15-compliant and beyond Federal DOT regulatory compliance now and with any upcoming regulations. Automated duty status updates Accurate, automatic recording of driving time when the vehicle is in motion. Duty status timers Standard 7 and 8-day duty periods (plus timers for the 16-hour rule, and 10-hour and 34-hour resets). 8-day duty status history Duty status logs of the current 8 day period, including the present day. Record of duty status graph Vehicle Inspection Report In-cab HOS alerts and warnings for drivers Fleet HOS alerts Fax & email logs Roadside audit view Personal conveyance mode HOS Drive-Safe mode Driver log archive Over-the-air updates Line graph visual of each recorded 24-hour drive period of duty statuses, just like paper logs. Paperless, itemized in-cab vehicle inspection reports and maintenance reporting via Rand McNally web portal. To-the-minute alerts to driver when running low on driving and on-duty time with visual and audio cues. Text message or email notifications sent when drivers have reached or exceeded their driving hour limit. Drivers can send requested logs from the device to law enforcement and transportation officials during roadside inspections. Displays a protected, simplified view of required log information drivers can activate when displaying logs on device for law enforcement and transportation officials. Fleet-configured capability allowing drivers to use personal conveyance option. Simplified, motion-activated interface that displays available driving time in a color-coded format to minimize driver distraction. For web-based access of up to 6 months of driver log data. As rules and regulations change, the TND 760 and TPC 7600 receive updates over the air to eliminate fleet and driver installation time. Rand McNally Compliance applications are available on both the TND 760 and TPC 7600 in-cab devices. To learn more about Rand McNally HOS compliance and request a quote Call 1-800-641-RAND (7263) or visit randmcnally.com/fleet 2012 Rand McNally. All rights reserved. Rand McNally, IntelliRoute are registered trademarks and TND and the arrow design mark are trademarks of RM Acquisition, LLC d/b/a Rand McNally. Wi-Fi is a registered trademark of the Wi-Fi Alliance. 2011 NAVTEQ. NAVTEQ ON BOARD is a trademark of NAVTEQ. TRUCK DATA
Hours of Service Quick Reference Card Current Day: Log Summary and Timers (Tap HOS > Summary) 8-Day: Duty Status History (Tap HOS > Logs) HOS Mode and Log Options (Tap HOS > Options) Title lists driver name and current duty status. Refer to black Status Box to view your current driving availability. Tap Today s log to view the graph version of the current day s driving (see Daily Logs Graph). To update your current duty status: Tap Off-Duty to enter off-duty mode. Tap S. Berth to enter sleeper berth mode. Tap Driving to enter driving mode. Tap On-Duty to enter on-duty mode. Note: You can also update your current duty status on the Logs, DVIR and Options tabs. Tap Trip Info to update your current trip information: Load # Co-driver Trailer Other remarks Title lists driver name and current duty status. indicates the currently selected day. indicates the driver has certif ied his logs. Date: date of 24-hour log period Miles: # miles driven in 24-hour log period Off-Duty: time in off-duty mode S.B.: time in sleeper berth mode Driving: time in driving mode On-Duty: time in on-duty mode Roadside Audit and Personal Conveyance Modes: Tap Change Mode, then Roadside Audit before showing logs to law enforcement. Tap Normal to exit Roadside Audit mode. Enter your Driver ID. Tap Personal Conveyance to enter personal conveyance mode. Tap Fax/Email Logs to send logs to law enforcement. You can also email your logs to yourself for record keeping. Tap View Violations to view recent violations. Must [enter fax# or email address]. Request Most Up-to-Date Information: Tap Request Logs to view up-to-date logs. Tap Request Last DVIR to view last recorded Daily Vehicle Inspection Report. WARNING TND103111_0001_v1
Daily Log Graph: (Tap HOS > Summary > Today s Log > Graph) Duty Status List (Tap HOS > Today s Log > List) Duty Status Totals Summary (Tap HOS > Today s Log > Summary) Duty Trip Info (Tap HOS > Today s Log >Trip Info) Tap Arrows to scroll through Graph log of each day for the last 8 days. Note: You can also scroll through Arrows on the List, Summary and Trip Info tabs. Tap << Prev and Next >> to scroll through day s duty status or trip info entries. Tap Edit to make changes to a non-driving duty status or trip info entry. If log is already certified, tap View to view details of duty status or trip info entries. Tap Add Duty Status to submit a duty status change. Tap Add Trip Info to enter information about a previous trip (load number, trailers, pre/post trip status or safety check). Tap Certify to certify your 24-hour log as correct. Note: when authorized you can also add and edit previous duty statuses/trip info and recertify your logs on the List tab. WARNING Rand McNally, 106 Hi-Lane, Richmond, KY 40475. Call us 1-800-641-(RAND) 7263 or email us at fleetsupport@randmcnally.com Tap Arrows to scroll through duty status history List of each day for the last 8 days. Tap any entry to view its details. Duty Status Entries: Time: time of duty status entry Status: type of duty status (Off-Duty, Sleeper Berth, Driving, On-Duty) Location: location of duty status entry Tap Arrows to view Summary of each day for the last 8 days. Totals for day: Off-Duty: off-duty mode S.B.: Sleeper berth mode Driving: driving mode On-Duty N.D.: on-duty, not driving mode Miles: total miles driven Running totals for day: On-Duty: total on-duty time spent 70hr total: how much driving time in current 70-hour cycle Remaining 70hr: remaining time in current 70-hour cycle Remaining Driving: remaining driving time in current 70-hour cycle Remaining On-Duty: remaining on-duty time in current 70-hour cycle Tap Arrows to scroll through Trip Info of each day for the last 8 days. Co-Driver(s): co-driver name Trailer(s): trailer ID BOL(s): bill of lading number Truck #: tractor number Total Miles: total miles driven Personal Miles: total miles driven in personal conveyance mode 2011 Rand McNally. All rights reserved. Specifications are subject to change without notice. Rand McNally endeavors to ensure that the information in this document is correct and fairly stated, but Rand McNally is not liable for any errors or omissions. Published information may not be up to date, and it is important to confirm current status with Rand McNally. The technical data may be subject to U.S. and international export, re-export or transfer (export) laws. Diversion contrary to U.S. and international law is strictly prohibited.