WRENHES...22 OMINTION WRENHES...28 RTHET OMINTION WRENHES...32 RTHET RING WRENHES...32 4-IN- RTHETS...33 RTHET WRENHES MODUES...34 OPEN-END WRENHES...36 DIN WRENHES...37 OFFSET RING WRENHES...39 NGED SOKET WRENHES...4 OX WRENHES...43 FRE-NUT WRENHES...44 DJUSTE WRENHES...45 HOOK ND PIN WRENHES...45 SFFODING WRENHES www.expert-tool.com 2
WRENHES OMINTION WRENHES OMINTION WRENHES - METRI - ISO 69 - ISO 7- - ISO 338 - ISO 7738 - DIN 33-2-point OGV ring angled at 5. - Open end angled at 5 from handle axis. - OGV profile maximizing the contact surface with the nut for a longer lifetime. mm mm mm mm mm mm Weight g EN E3228 5 4.7 9 3.4 4 93 5 32589532289 E3229 5,5 4.7 9 3.4 4 93 5 32589532296 E3202 6 6.2 0.4 3.7 4.5 00 20 32589532029 E3200 7 8.2.7 3.7 5 0 20 32589532005 E320 8 20.2 3.2 4 5 20 25 3258953202 E3204 9 22.2 4.6 4 6 30 35 32589532043 E3205 0 23.7 6 4 6.5 40 37 32589532050 E3206 25.7 7 4.7 6.5 50 45 32589532067 E3207 2 27.5 9 4.8 7 60 60 32589532074 E3208 3 28.7 20.6 5.5 7.5 70 67 3258953208 E3209 4 3.7 22 5.6 8 80 80 32589532098 E320 5 34 23.4 5.7 8.5 90 95 3258953204 E32 6 36 24.8 5.8 9 200 0 32589532 E322 7 38.5 26.2 6.3 9.5 20 23 3258953228 E323 8 39 27.6 6.8 0 220 50 3258953235 E324 9 42.2 29 7. 0.4 230 65 3258953242 E325 20 42.7 30.2 7.2 0.9 240 80 3258953259 E326 2 45.5 3.7 7.5.4 250 85 3258953266 E327 22 48.7 33 8.9 260 242 3258953273 E328 23 48.7 33 8.9 260 235 3258953280 E329 24 50.7 35 8 2.9 280 280 3258953297 E3220 25 52.7 38 8 3.4 295 325 32589532203 E322 26 52.7 38 8 3.4 295 325 3258953220 E3222 27 56.2 40 8.9 4.4 30 370 32589532227 E3223 28 60.2 44.6 9 5.9 340 495 32589532234 E3224 29 60.2 44.6 9 5.9 340 495 3258953224 E3225 30 60.2 44.6 9 5.9 340 485 32589532258 E3226 32 64.7 47.3 0.6 6 360 600 32589532265 E00 34 68.7 49.3.5 7.2 380 639 325895008 E002 36 73 53.4 3 8.2 40 809 3258950025 E003 38 76 56.5 4.5 9 430 965 3258950032 5 22
OMINTION WRENHES - INH - SME 07-00 - 2-point OGV ring angled at 5. - Open end angled at 5 from handle axis. - OGV profile maximizing the contact surface with the nut for a longer lifetime. " mm mm mm mm mm Weight g EN E332 /4" 6.2 0.4 3.7 4.5 00 5 3258953325 E3230 5/6" 20.2 3.2 4 5 20 26 32589532302 E333 /32" 22.2 4.6 4 6 30 30 3258953332 E334 3/8" 23.7 6 4 6.5 40 38 3258953349 E335 7/6" 25.7 7 4.7 6.5 50 46 3258953356 E336 /2" 28.7 20.6 5.5 7.5 70 68 3258953363 E337 9/6" 3.7 22 5.6 8 80 79 3258953370 E338 5/8" 36 24.8 5.8 9 200 0 3258953387 E3358 3/4" 42.2 29 7. 0.4 230 50 32589533583 E3359 3/6" 45.5 3.7 7.5.4 250 94 32589533590 E3360 7/8" 48.7 33 8.9 260 225 32589533606 E3235 5/6" 50.7 35 8 2.9 280 293 32589532357 E3236 " 52.7 38 8 3.4 295 328 32589532364 E339 /6" 38.5 26.2 6.3 9.5 20 4 3258953394 E336 "/6 56.2 40 8.9 4.4 30 386 3258953363 E3362 "/8 60.2 44.6 9 5.9 340 503 32589533620 E3363 "/4 64.7 47.3 0.6 6 360 602 32589533637 E020 "5/6 68.7 49.3.5 7.2 380 632 3258950205 E0202 "3/8 73 53.4 3 8.2 40 806 32589502022 E0203 "7/6 73 53.4 3 8.2 40 804 32589502039 E0204 "/2 76 56.5 4.5 9 430 992 32589502046 E0205 "5/8 83.5 6.5 5.5 20 480 264 32589502053 E0206 "7/8 0.5 73.5 7.2 22.6 540 20 32589502060 5 www.expert-tool.com 23
WRENHES OMINTION WRENHES SET OF OMINTION WRENHES - METRI * * ontent set ontents Qty Weight g EN E0300 8-0--3-7-9-22-24 mm. ardboard box 8 22 32589503005 E324 /4"-5/6"-3/8"-7/6"-/2"-9/6"-5/8"- /6"-3/4 ardboard box 9 85 3258953248 E030 0--2-3-4-5-6-7-8-9 mm. Plastic rack 0 080 3258950304 E0309 7-8-0--2-3-6-7-8-9-22-24 mm. Plastic rack 2 495 32589503098 E0327 7-8-0--2-3-6-7-8-9-22-24 mm. Tool roll 2 495 32589503272 E3242 /4"-5/6"-3/8"-7/6"-/2"-9/6"-5/8"- /6"-3/4"-3/6"-7/8"-5/6 E3238 8-9-0--2-3-4-5-6-7-8-9-20-2- 22-24 mm. E3239 6-7-8-9-0--2-3-4-5-6-7-8-9- 22-24 mm. E033 6-7-8-9-0--2-3-4-5-6-7-8-9-20-2-22-24 mm. E3240 6-7-8-9-0--2-3-4-5-6-7-8-9-20-2-22-24 mm. E0306 6-7-8-9-0--2-3-4-5-6-7-8-9-20-2-22-24-27-30-32 mm. E0326 6-7-8-9-0--2-3-4-5-6-7-8-9-20-2-22-24-26-27-30-32 mm. * E0323 6-7-8-9-0--2-3-4-5-6-7-8-9-20-2-22-23-24-25-26-27-28-29-30-32 mm. ardboard box 2 580 32589532425 ardboard box 6 894 32589532388 ardboard box 6 646 32589532395 Tool roll 8 2035 3258950335 ardboard box 8 2022 3258953240 Tool roll 2 3450 32589503067 ardboard box 22 3998 32589503265 ardboard box 26 4600 32589503234 NEW * OMINTION WRENH MODUES - Thermoformed module. - Designed to be inserted in roller cabinet drawers. - Empty tray for E94937 module: E3557. - Empty tray for E0302 module: E00508. ontent set Qty Weight g EN E0302 27-29-30-32 mm. 4 2230 32589503029 E94937 6-7-8-9-0--2-3-4-5-6-7-8-9- 22-24 mm. 6 850 325895949375 24
SHORT OMINTION WRENHES - METRI - ISO 69 - ISO 7- - ISO 338 - ISO 7738 - DIN 33-2-point OGV ring angled at 5. - Open end angled at 5 from the handle axis (increment angle 30 ). - OGV Ring profile maximizing contact surface with the nut for a longer lifetime. - Short wrenches for better accessibility in confined spaces. mm mm mm mm mm mm Weight g EN E006 0 20.9 4.8 5.4 6.6 96 25 3258950063 E008 2 25 8 6 7.9 04 40 3258950087 E009 3 26.4 9.7 6.2 8. 08 50 3258950094 E00 4 29.3 2.9 6.6 8 4 65 325895000 E0 5 3.2 22.8 7 9 8 70 32589507 E03 7 35 25.4 7.7 0 28 90 32589503 E05 9 39.5 27.8 8.4.4 39 30 325895055 5 SET OF 7 SHORT OMINTION WRENHES - METRI - Supplied on plastic rack. ontent set Qty Weight g EN E0304 0-2-3-4-5-7-9 mm. 7 640 32589503043 www.expert-tool.com 25
WRENHES OMINTION WRENHES ONG OMINTION WRENHES - METRI - ISO 69 - ISO 7- - 2-point OGV ring angled at 5. - Open end angled at 5 from the handle axis (increment angle 30 ). - OGV Ring profile maximizing contact surface with the nut for a longer lifetime. - ong handle wrenches for increased tightening torque. mm mm mm mm mm Weight g mm EN E070 8 7.7 3.3 4.2 6.4 35 48 3258950700 E0702 9 20.5 4.8 5 7. 45 67 32589507027 E0703 0 2.8 6 5.4 7.4 50 72 32589507034 E0704 24.2 7.3 5.5 8 60 86 3258950704 E0705 2 26.5 8.5 5.7 8.4 75 97 32589507058 E0706 3 27.4 9.7 6. 8 85 207 32589507065 E0707 4 30.7 22. 6.7 9 00 223 32589507072 E0708 5 32 23. 7 9.9 20 233 32589507089 E0709 6 34.5 24. 7.3 0.6 40 243 32589507096 E070 7 37 26.4 8..2 55 26 3258950702 E07 8 39. 27.5 8.4.4 90 270 325895079 E770 2 44.8 32.4 9 3. 32 30 3258957703 E7702 22 47.3 33.4 9.5 3.7 347 38 32589577020 E7703 23 47.3 33.4 9.5 3.7 349 38 32589577037 E7704 24 5.6 35.4 0. 4.9 436 338 32589577044 E7705 26 54.5 37 0.4 5.7 527 355 3258957705 E7706 27 55.6 40.4.4 7 576 375 32589577068 E7707 28 55.6 40.4.4 7 59 375 32589577075 E7708 29 58.6 42.3 2.4 8.2 727 44 32589577082 E7709 30 58.6 42.3 2.4 8.2 720 44 32589577099 E770 32 65.5 46.8 3.4 9 869 435 3258957705 E77 33 70.2 49.7 3.4 7.5 092 470 325895772 E772 34 70.2 49.7 3.4 7.5 079 470 3258957729 E773 35 70.2 49.7 3.4 7 50 470 3258957736 E774 36 75.2 55.5 4.3 8.2 303 50 3258957743 E775 38 75.2 55.5 4.3 8.2 255 50 3258957750 E776 4 82 59.6 5 8 567 550 3258957767 E777 42 82 59.6 5 8 662 550 3258957774 E778 46 85 63.6 7.2 9 763 62 325895778 E779 50 95 72 9.3 22.2 2600 650 3258957798 5 SET OF 2 ONG OMINTION WRENHES - METRI - Supplied on plastic rack. ontent set Qty Weight g EN E0303 8-9-0--2-3-4-5-6-7-8-9 mm. 2 690 32589503036 26
OFFSET OMINTION WRENHES - METRI - ISO 69 - ISO 7- - ISO 338 - ISO 7738 - DIN 33-2-point OGV ring angled at 0. - Open end angled at 5 from handle axis. - 2-point OGV ring wrenches offset by 70 for better access to recessed nuts. mm mm mm mm mm mm Weight g EN E7720 6 6.3 0.4 3.7 5.2 25 7 32589577204 E772 7 8.2.8 3.7 5.7 35 2 325895772 E7722 8 20.3 3.4 4 6.3 45 32 32589577228 E7723 9 22.2 4.4 4 7.3 55 4 32589577235 E7724 0 23.8 6.2 4 7.3 65 44 32589577242 E7725 25.7 7.2 4 8. 72 56 32589577259 E7726 2 27.6 8.7 4 8 80 67 32589577266 E7727 3 28.8 20.3 5.9 9.6 95 77 32589577273 E7728 4 3.7 2.5 5.9 9 20 89 32589577280 E7729 5 34 22.8 6.4 0 25 07 32589577297 E7730 6 36 24.2 6.8 0.9 230 32 32589577303 E773 7 38.6 26. 7..6 240 50 3258957730 E7732 8 39 27.2 7.4 2.2 255 67 32589577327 E7733 9 42. 28.8 7.8 2.5 265 9 32589577334 E7734 2 45.3 3.7 8.4 2.8 280 240 3258957734 E7735 22 46. 33 8.6 3. 300 276 32589577358 E7736 23 5.4 35 9 4 320 347 32589577365 E7737 24 5.4 35 9 4 320 337 32589577372 E7738 26 54.5 38 0.4 5.3 348 448 32589577389 E7739 27 57.8 4 0.8 6 370 569 32589577396 E7740 28 57.8 4 0.8 6 370 553 32589577402 E774 29 62.5 43.7.4 6.5 390 664 3258957749 E7742 30 62.5 43.7.4 6.5 390 65 32589577426 E7743 32 67 46.7 2 7.5 42 83 32589577433 70 SET OF 9 OFFSET OMINTION WRENHES - METRI - Supplied in a box. ontent set Weight g EN E7744 8-9-0--3-4-5-7-9 mm 840 32589577440 www.expert-tool.com 27
WRENHES RTHET OMINTION WRENHES RTHET OMINTION WRENHES - METRI - ISO 69 - ISO 7- - 5 increment. - 2-point OGV ring angled at 5. - Open end angled at 5 from the handle axis (increment angle 30 ). - OGV Ring profile maximizing contact surface with the nut for a longer lifetime. - Switch to change ratcheting direction built into handle to prevent accidental change. mm mm mm mm mm mm Weight g EN E7377 6 6.3 7.7 5 7.7 24 28 32589573770 E7378 7 6.3 7.7 5 7.7 24 28 32589573787 E330 8 8.5 7.7 5 7.7 35 32 3258953309 E3302 9 20.5 9 5.3 7.7 42 40 32589533026 E3303 0 22.5 2.2 5.8 8 58 56 32589533033 E3300 25 22.6 5.9 8 67 68 32589533002 E3304 2 26.9 23.8 6. 8 73 78 32589533040 E3305 3 29 25.9 6.6 8.9 79 96 32589533057 E3306 4 3.5 27.7 7.5 9 89 6 32589533064 E3307 5 34 29.2 7.9 9.4 99 36 3258953307 E3308 6 35 3.8 7.9 9.9 25 60 32589533088 E3309 7 38 34. 8 0.6 232 82 32589533095 E330 8 40. 34 8.5 238 200 325895330 E33 9 42 35. 8.9.2 247 248 325895338 E7370 2 45.3 4.5 0.3 3 285 540 3258957370 E737 22 45.3 4.5 0.3 3 285 540 3258957378 E7372 24 52 47 0.8 4.5 325 70 32589573725 E7373 27 58.6 52 2.5 5 359 750 32589573732 E7374 30 64.5 59.5 3 7 425 970 32589573749 E3460 32 64.5 59.5 3 7 425 970 32589534603 SETS OF RTHET OMINTION WRENHES - METRI ontent set ontents Qty Weight g EN E07 8-0-2-3-4-7-9 mm. Plastic rack 7 990 325895079 E06 8-9-0--2-3-4-5-6-7-8-9 mm. Plastic rack 2 670 325895062 28
FST RTHET OMINTION WRENHES - METRI - ISO 69 - ISO 7- - 5 increment. - Straight 2-point OGV ring end. - Ratchet effect open end angled at 5 from the handle axis (increment angle 30 ). - OGV Ring profile maximizing contact surface with the nut for a longer lifetime. - Switch of direction by turning the wrench. mm mm mm mm mm mm Weight g EN E0924 8 8 7.5 5 7 36 30 32589509243 E0925 9 20 9.3 5.4 7.6 43 45 32589509250 E0926 0 22 2 5.8 7.7 60 55 32589509267 E0927 24.5 22.7 6. 8 68 65 32589509274 E0928 2 26.5 24 6.4 8 74 75 3258950928 E0929 3 27.6 26 6.7 9 80 05 32589509298 E0930 4 3.4 27.7 7.4 9.4 93 5 32589509304 E093 5 33.4 29 7.7 0 200 40 325895093 E0932 6 34.6 30.7 8. 0.6 26 65 32589509328 E0933 7 38.4 33 8 0.9 233 85 32589509335 E0934 8 39.9 33 9.2 239 205 32589509342 E0935 9 4.5 34 9.5.5 250 225 32589509359 SET OF 2 FST RTHET OMINTION WRENHES - METRI - Supplied on plastic rack. ontent set Qty Weight g EN E0 8-9-0--2-3-4-5-6-7-8-9 mm. 2 590 32589507 www.expert-tool.com 29
WRENHES RTHET OMINTION WRENHES HINGED RTHET OMINTION WRENHES - METRI - ISO 69 - ISO 7- - 5 increment. - 2-point OGV ring end flexible through 80. - Open end angled at 5 from the handle axis (increment angle 30 ). - OGV Ring profile maximizing contact surface with the nut for a longer lifetime. - Switch of direction by turning the wrench. mm mm mm mm mm mm Weight g EN E090 8 7 7.5 5.5 7 36 40 3258950904 E0902 9 9.2 9.3 5.8 7.6 43 50 3258950902 E0903 0 2.3 2 6. 7.7 60 65 32589509038 E0904 23.7 22.7 6.4 8 68 75 32589509045 E0905 2 25.8 24 6.7 8 74 90 32589509052 E0906 3 26.8 26 7 9 80 0 32589509069 E0907 4 30.4 27.7 7.3 9.4 93 30 32589509076 E0908 5 32. 29. 7.7 0 200 40 32589509083 E0909 6 33 30.7 8 0.6 26 80 32589509090 E090 7 37 32.6 8 0.9 233 205 3258950906 E09 8 38 33 8.6.2 239 230 325895093 E092 9 40 34 9.5 250 270 3258950920 SETS OF HINGED RTHET OMINTION WRENHES - METRI - ResisTorx screwdrivers: TT0-TT5-TT20-TT25-TT30-TT40. - Empty tray: E6097. ontent set ontents Qty Weight g EN E08 8-0-2-3-4-7-9 mm. Plastic rack 7 990 325895086 E02 8-9-0--2-3-4-5-6-7-8-9 mm. Plastic rack 2 620 325895024 30
RTHET RING WRENHES - METRI - ISO 69 - ISO 7- - 5 increment. - Straight 2-point OGV ring end. - OGV Ring profile maximizing contact surface with the nut for a longer lifetime. - Switch of direction by turning the wrench. mm mm mm mm mm mm Weight g EN E094 0 2.3 2 5.5 7.7 96 40 3258950944 E096 2 25.4 24 6. 8 04 55 3258950968 E097 3 26.8 26 6.3 9 08 65 3258950975 E098 4 29.8 27.7 6.7 9.4 4 80 3258950982 E099 5 3.6 29. 7. 0 8 00 3258950999 E092 7 36 32.6 7.8 0.9 28 25 3258950922 E0923 9 40 34 8.5.5 38 55 32589509236 SET OF 7 SHORT RTHET OMINTION WRENHES - METRI - Plastic rack. ontent set Qty Weight g EN E04 0-2-3-4-5-7-9 mm. 7 670 325895048 www.expert-tool.com 3
WRENHES RTHET RING WRENHES RTHET RING WRENHES - MM - ISO 69 - ISO 7- - 5 increment. - Straight polygon head 2-point. - Direction switch by turning the wrench. - Eye profile maximizing the contact surface with the nut for longer lifetime. - Finish: bright chrome finish. mm mm mm mm mm mm mm Weight g EN E0936 8 0 7.5 2 7 7.7 28 45 32589509366 E0937 0 2 22.7 7.7 8 50 60 32589509373 E0938 2 3 24 26 8 9 70 95 32589509380 E0939 4 5 27.7 30.7 9.4 0 90 40 32589509397 E0940 7 9 32.6 34 0.9.5 230 225 32589509403 SET OF 5 RTHET RING WRENHES - METRI - Supplied on plastic rack. ontent set Qty Weight g EN E03 8x0-0x-2x3-4x5-7x9 mm. 5 730 32589503 4-IN- RTHETS "4-IN-" RTHETS - MM - 4 sizes per wrench. - Polygon head 2-point. - Direction switch by built-in protected control. - Finish: bright chrome finish. mm mm mm mm mm mm mm Weight g EN E0943 8x0 2x3 2,5 26,5 8,9 9,8 60 00 32589509434 E0944 9x 4x5 23, 29,7 8,9 0,4 80 30 3258950944 E0945 6x7 8x9 34,5 35,6,7 2,2 230 265 32589509458 32
SET OF 3 "4-IN-" RTHETS - MM - Supplied in blister. ontent set Qty Weight g EN E5 8x0-2x3-9x-4x5-6x7-8x9 3 540 32589554 RTHET WRENHES MODUES MODUE OF 7 RTHET OMINTION WRENHES METRI ND DJUSTE WRENH - Thermoformed module. - Designed to be inserted in roller cabinet drawers. - Empty module: E00509. ontent set Qty Weight g EN E00 8-0-2-3-4-7-9 mm.- 250 mm. 8 575 325895000 MODUE OF 2 RTHET OMINTION WRENHES - METRI - Thermoformed module. - Designed to be inserted in roller cabinet drawers. - Empty module: E95064. ontent set Qty Weight g EN E94938 8-9-0--2-3-4-5-6-7-8-9 mm. 2 592 325895949382 www.expert-tool.com 33
WRENHES OPEN-END WRENHES OPEN-END WRENHES - METRI - ISO 69 - ISO 7- - ISO 338 - ISO 002 - DIN 30 - Open end angled at 5 from handle axis. h mm mm mm mm mm mm mm Weight g EN E3262 4 5 2.5 4.5 3.2 3.2 2 5 32589532623 E3250 6 7 6 8 3.3 3.3 22 20 32589532500 E325 8 9 20 22 3.6 3.6 40 32 3258953257 E3265 8 0 20 22 3.6 3.6 40 32 32589532654 E3252 0 23.4 25.4 4 4 56 47 32589532524 E3267 0 3 25.8 28.4 5 5 72 62 32589532678 E3268 3 27.2 28.4 5 5 72 62 32589532685 E3253 2 3 27.2 28.4 5 5 72 63 3258953253 E3272 3 7 3.4 33.9 5.6 5.6 88 88 32589532722 E3254 4 5 3.4 33.9 5.6 5.6 88 92 32589532548 E3255 6 7 35.9 38 6. 6. 204 8 32589532555 E3275 7 9 38.4 4.9 6.5 6.5 220 58 32589532753 E3256 8 9 38.4 4.9 6.5 6.5 220 46 32589532562 E3257 20 22 42 45.9 7.2 7.2 234 200 32589532579 E3258 2 23 45.2 48.4 7.5 7.5 247 220 32589532586 E3279 22 24 45.2 48.4 7.5 7.5 247 234 3258953279 E20 24 26 50.4 55.9 8 8 266 38 325895204 E3259 24 27 50.4 55.9 8 8 266 375 32589532593 E3260 25 28 53.4 6.9 8.4 8.4 285 377 32589532609 E326 26 28 53.4 6.9 8.4 8.4 285 456 3258953266 E328 27 29 58.3 62.7 9. 9. 302 456 3258953284 E3282 27 30 58.3 62.7 9. 9. 302 48 3258953282 E3909 30 32 59.9 64 9. 9. 302 600 32589539097 E3285 33 35 64 78 0 0 39 62 32589532852 E3287 34 36 64 78 0 0 39 98 32589532876 E3286 36 4 74.3 85.4 2.2 2.2 380 98 32589532869 E3288 38 42 74.3 85.4 2.2 2.2 380 98 32589532883 E202 4 46 85 94 4.7 4.7 45 450 325895202 E203 46 50 94 03 5.7 5.7 465 767 3258952038 34
OPEN-END WRENH - INH - SME 07-00 - Open end angled at 5 from handle axis. h " " mm mm mm mm mm Weight g EN E3289 /4" 5/6" 6.2 8 3.3 3.3 22 20 32589532890 E3290 /32" 3/32" 20.2 22.2 3.6 3.6 40 3 32589532906 E329 3/8" 7/6" 23.6 25.6 4 4 56 49 3258953293 E3292 /2" 9/6" 28.6 3.6 5 5 80 05 32589532920 E3293 5/8" /6" 36. 38.4 6. 6. 204 25 32589532937 E3294 3/4" 3/6" 42 45.6 7.2 7.2 234 24 32589532944 E3295 7/8" 5/6" 45.4 48.6 7.5 7.5 247 246 3258953295 E3296 " "/6 53.8 62.3 8.4 8.4 285 379 32589532968 E3297 "/6 "/4 58.5 65.3 9. 9. 302 406 32589532975 E3298 "3/6 "5/6 60.3 65.3 9. 9. 302 458 32589532982 E3299 "3/8 "/2 64.8 78 0 0 39 632 32589532999 E346 "7/6 "5/8 74.7 85.8 2.2 2.2 380 920 3258953460 SETS OF OPEN END WRENHES - METRI E406 E738 E222 * E7382 ontent set ontents Qty Weight g EN 4x5-6x7-8x9-0x-2x3-4x5-6x7-8x9 mm. 6x7-8x9-0x-2x3-4x5-6x7-8x9-2x23-22x24-26x28-27x29-30x32 mm. 6x7-8x9-0x-2x3-4x5-6x7-8x9-2x23-22x24-26x28-27x29-30x32 mm. 4x5-6x7-8x9-0x-2x3-4x5-6x7-8x9-2x23-22x24-26x28-27x29-30x32-33x35-36x4-38x42 mm. Plastic rack ardboard box 8 720 3258954063 2 2350 3258957387 Tool roll 2 2350 3258952229 ardboard box 6 4730 32589573824 NEW * www.expert-tool.com 35
WRENHES OPEN-END WRENHES MODUE OF OPEN END WRENHES - METRI - Thermoformed module. - Designed to be inserted in roller cabinet drawers. - Empty module: E22. E220 ontent set Qty Weight g EN 6x7-8x9-0x-2x3-4x5-6x7-8x9-2x23-22x24-27x29-30x32 mm. 2345 3258952205 DIN OPEN-END WRENHES - DIN 894 - ISO 272 - ISO 7- - ISO 69 - ISO 338 - Open end with 5 angle with respect to the handle s axis. (30 increment) - Forged in high grade alloy steel. - lack phosphate finish. NEW mm mm mm mm mm mm Weight g EN E400 5.5 7 3 5 3 93 2 3258954007 E4002 6 7 3 5 3 93 2 32589540024 E4004 7 8 5 7 3.4 0 6 32589540048 E4005 8 9 7 9 3.4 0 20 32589540055 E4006 8 0 7 2 3.8 22 32589540062 E4007 9 0 9 2 3.8 25 32589540079 E4008 0 2 24 4.7 20 32 32589540086 E4009 0 2 2 25 4.7 20 35 32589540093 E402 2 3 25 27 5.2 30 45 3258954023 E405 3 6 27 32.5 5.5 48 62 3258954054 E406 3 7 27 34.5 6 55 74 325895406 E407 4 5 28.5 30.5 5.5 50 60 3258954078 E408 4 7 28.5 34.5 6 62 72 3258954085 E409 6 8 32.5 33.5 6.2 62 86 3258954092 E4020 7 9 34.5 38.5 6.2 72 75 32589540208 E402 8 2 36.5 42 6.5 8 8 3258954025 E4022 9 22 38.5 44 6.5 84 25 32589540222 E4023 9 24 38.5 48 7.5 20 53 32589540239 E4024 22 24 44 48 7.5 22 68 32589540246 E4025 24 27 48 53 8.5 236 255 32589540253 E4026 24 30 48 60 9.2 276 298 32589540260 E4027 27 30 53 60 9.2 275 320 32589540277 E4028 30 32 60 64 0.2 275 372 32589540284 E4029 30 34 60 68 0.6 280 390 3258954029 E4030 32 36 64 7.2 297 530 32589540307 E403 36 4 7 8 2.5 335 69 3258954034 E4032 4 46 8 92 2.5 374 908 3258954032 E4033 46 50 92 00 3 44 30 32589540338 E4034 55 60 0 20 4.4 480 885 32589540345 36
SET OF DIN OPEN-END WRENHES - METRI NEW E4040 ontent set ontents Qty Weight g EN 5,5x7-8x9-0x-2x3-3x7-4x5-6x8-7x9-9x22-24x27-24x30-30x32 mm Tool roll 2 750 32589540406 OFFSET RING WRENHES OFFSET RING WRENHES - METRI - ISO 69 - ISO 7- - ISO 338 - ISO 004 - DIN 838-2-point OGV ring wrenches offset by 70 for better access to recessed nuts. - OGV Ring profile maximizing contact surface with the nut for a longer lifetime. mm mm mm mm mm mm mm Weight g EN E332 6 7 0.8 2.5 4 5.6 70 45 3258953327 E3322 8 9 3.4 5.3 6 6.8 82 70 32589533224 E50 8 0 3.4 5.5 6 7.4 90 79 325895505 E3323 0 6 7.8 7.4 7.9 206 90 3258953323 E3324 2 3 8.8 20.2 8.4 8.9 23 26 32589533248 E3364 3 7 9 25.2 9 245 70 32589533644 E3325 4 5 20.8 22.5 9.4 9.9 228 55 32589533255 E3326 6 7 24.2 25.7 0.4 0.9 246 93 32589533262 E3366 7 9 27.6 28.7.4.9 265 250 32589533668 E500 8 9 27.6 28.7.4.9 265 24 3258955008 E502 9 22 29.7 32.5 2.4 2.9 288 34 3258955022 E3328 20 22 29.7 32.5 2.4 2.9 288 35 32589533286 E3730 2 23 3 33 2.3 3.3 30 352 32589537307 E3329 22 24 3 33 2.3 3.3 30 344 32589533293 E503 24 27 34 39 3.7 4.3 330 475 3258955039 E3367 25 28 36.6 40.5 4.2 4.7 348 548 32589533675 E3368 27 29 42 45.2 5 6 372 662 32589533682 E3369 27 30 42 45.2 5 6 372 662 32589533699 E7376 30 32 42.2 45.5 5 6 372 635 32589573763 h 70 www.expert-tool.com 37
WRENHES OFFSET RING WRENHES SETS OF OFFSET RING WRENHES - METRI ontent set ontents Qty Weight g EN E709 20x22-2x23-24x27-27x30-30x32 mm. ardboard box E708 8x9-0x-2x3-4x5-6x7-8x9 mm. Plastic rack * E74 6x7-8x9-0x-2x3-6x7-8x9-24x27-30x32 mm. 5 2575 3258957095 6 980 3258957088 Tool roll 8 700 325895749 NEW * MODUE OF 8 OFFSET RING WRENHES - METRI - Thermoformed module. - Designed to be inserted in roller cabinet drawers. - Empty module: E7. E70 ontent set Qty Weight g EN 6x7-8x9-0x-2x3-4x5-6x7-8x9-22x24 mm. 8 576 32589570 38
NGED SOKET WRENHES NGED SOKET WRENHES 2-POINT X 6-POINT - METRI - ISO 69 - ISO 2236 - The specific angle offers increased torque application. - The opening allows a threaded rod to be passed through for nuts on a long thread and also enables the use of a bar to increase torque application. - The deep punch in the heads allows for tightening even when the threaded rod protrudes. 5 h mm mm mm mm Weight g EN E3458 6 0 23 02 30 32589534580 E3459 7 24 06 40 32589534597 E3370 8 2.5 27 4 55 32589533705 E337 9 3.5 28 22 75 3258953372 E3372 0 5 30 29 90 32589533729 E3373 6.5 32 36 0 32589533736 E3374 2 8 38 44 50 32589533743 E3375 3 9.5 40 52 65 32589533750 E3376 4 2 42 60 200 32589533767 E3377 5 22.5 44 69 220 32589533774 E3378 6 24 49 78 270 3258953378 E3379 7 25.5 5 87 30 32589533798 E3380 8 26.5 53 95 330 32589533804 E338 9 28.5 54 204 40 325895338 E3382 20 29.5 56 22 465 32589533828 E3383 2 30.5 58 22 490 32589533835 E3384 22 32 60 230 525 32589533842 E3385 23 33.5 67 240 640 32589533859 E3386 24 34.5 70 250 640 32589533866 E3388 27 38 77 280 960 32589533880 E3389 30 42 87 30 250 32589533897 E3390 32 44.5 92 330 425 32589533903 SET OF NGED SOKET WRENHES - METRI Sided Qty ontent set ontents Weight g EN E7387 6 x 2 0 8-0--2-3-4-6-7-8-9 mm. ardboard box 2230 32589573879 E7386 6 x 2 6 8-9-0--2-3-4-5-6-7-8-9-2-22-23-24 mm. E220 6 x 2 22 6-7-8-9-0--2-3-4-5-6-7-8-9- 20-2-22-23-24-27-30-32 mm. ardboard box 4890 32589573862 ardboard box 920 325895203 www.expert-tool.com 39
WRENHES NGED SOKET WRENHES 6-POINT X 6-POINT - METRI - ISO 69 - ISO 2236 - The specific angle offers increased torque application. - The opening allows a threaded rod to be passed through for nuts on a long thread and also enables the use of a bar to increase torque application. - The deep punch in the heads allows for tightening even when the threaded rod protrudes. mm mm mm mm Weight g EN E3393 6 0 2 02 35 32589533934 E3394 7 22 06 45 3258953394 E3395 8 2.5 25 4 60 32589533958 E3396 9 3.5 26 22 75 32589533965 E3397 0 5 28 29 85 32589533972 E3398 6.5 30 36 5 32589533989 E3399 2 8 36 44 45 32589533996 E3400 3 9.5 38 52 70 32589534009 E340 4 2 40 60 200 3258953406 E3402 5 22.5 42 69 230 32589534023 E3403 6 24 46 78 290 32589534030 E3404 7 25.5 48 87 30 32589534047 E3405 8 26.5 50 95 325 32589534054 E3406 9 28.5 5 204 420 3258953406 E3407 20 29.5 53 22 440 32589534078 E3408 2 30.5 55 22 490 32589534085 E3409 22 32 57 230 530 32589534092 E340 23 33.5 64 240 650 3258953408 E34 24 34.5 67 250 660 325895345 E345 25 36 69 260 845 32589534528 E342 26 37 70 270 9858 325895345 E343 27 38 73 280 25 3258953422 E3452 28 39.5 75 290 840 32589534535 E3453 29 4 76 300 035 3258953446 E344 30 42 83 30 085 3258953439 E3454 3 43.5 86 320 352 32589534542 E345 32 44.5 88 330 450 3258953453 E3455 34 47 95 350 550 32589534559 E3456 35 48.5 96 360 643 32589534566 E3457 36 49.5 97 370 758 32589534573 5 h SETS OF NGED SOKET WRENHES - METRI - Slim head for perfect accessibility. - Neat and precise cut. - Soft bimaterial sheathing for good grip. Sided ontent set ontents Qty Weight g EN E7383 6 x 6 8-0--2-3-4-6-7-8-9 mm. ardboard box E346 6 x 6 8-9-0--2-3-4-5-6-7-8-9-2-22-23-24 mm. ardboard box 0 2260 3258957383 6 4925 3258953460 40
NGED SOKET WRENHES 0P NGED SOKET WRENHES 6-POINT X 6-POINT MODUE - METRI - Thermoformed module. - Designed to be inserted in roller cabinet drawers. - Empty module: E3558. ontent set Qty Weight g EN E94939 8-0--2-3-4-6-7-8-9 mm. 0 2445 325895949399 OX WRENHES 6 X 6 OX WRENHES - ISO 69 - ISO 2236 - Will reach nuts on long threaded rods. - Through hole for using a bar. mm mm mm Weight g EN E3500 5 8 95 25 32589535006 E350 5.5 9 95 25 3258953503 E3502 6 9.9 00 30 32589535020 E3503 7. 00 30 32589535037 E3504 8 2.7 09 50 32589535044 E3505 9 3.9 09 50 3258953505 E3506 0 5.5 8 77 32589535068 E3507 6.7 8 87 32589535075 E3508 2 8 27 7 32589535082 E3509 3 9.5 27 8 32589535099 E350 4 2.2 36 56 3258953505 E352 5 22.3 36 57 3258953529 E353 6 23.4 45 90 3258953536 E354 7 24.5 45 9 3258953543 E355 8 25.8 54 226 3258953550 E356 9 27 54 227 3258953567 E357 2 30.3 63 37 3258953574 E358 22 3.4 72 353 325895358 E359 23 32.5 72 360 3258953598 E3520 24 33 80 420 32589535204 h www.expert-tool.com 4
WRENHES 6X6 SIDED STRIGHT OX WRENHES - UNI 6746 - ISO 2236 - DIN 896 - Through hole for using a bar. - hrome molybdenum steel body. - Smooth chrome finish. NEW mm d mm» mm Weight g EN E280 6x7 5.5 00 25 5 3258952805 E2802 8x9 5.5 08 45 5 32589528022 E2803 8x0 5.5 90 50 5 32589528039 E2804 9x0 5.5 90 50 5 32589528046 E2805 0x 6.5 6 60 5 32589528053 E2806 X2 6.5 00 70 5 32589528060 E2807 2x3 6.5 24 90 5 32589528077 E2808 3x7 8.5 00 0 5 32589528084 E2809 4x5 8 32 25 5 3258952809 E280 6x7 8 40 50 5 3258952807 E28 8x9 8 58 75 5 325895284 E282 20x22 0 56 245 5 325895282 E283 2x23 0 63 275 3 3258952838 E284 24x26 73 325 3 3258952845 E285 25x28 2.5 82 445 3 3258952852 E286 27x29 2.5 9 475 3 3258952869 E287 30x32 3.5 200 590 3 3258952876 RS - ISO 286-2 - To check box wrenches NEW d mm» mm Weight g EN E290 6 25 30 3258952902 E2902 8 60 60 32589529029 E2903 0 220 40 32589529036 42
SIMPE HEW OX WRENHES NEW - Through hole for using a bar. EN mm d mm» d mm mm Weight g 8 2 4.5 70 20 3258952883 E289 9 3.2 4.5 70 30 3258952890 E2820 0 4.5 5.5 80 30 32589528206 E282 2 6.2 6.5 80 60 3258952823 E2822 3 7.6 6.5 80 60 32589528220 E2823 4 9.5 6.5 80 60 32589528237 E2824 6 2.9 6.5 80 60 32589528244 E2825 8 24.6 0.5 90 80 3258952825 E2826 7 23.3 8.5 90 70 32589528268 E2827 9 25.9 0.5 90 80 32589528275 E2828 2 28.2 0.5 90 20 32589528282 E2829 22 29.6 0.5 90 20 32589528299 E2830 24 3.9 2.5 00 40 32589528305 E283 27 35.8 2.5 00 70 3258952832 E2832 30 39.7 6.5 0 208 32589528329 E288 FRE-NUT WRENHES 6 X 6 POINT FRE NUT WRENHES - DIN 38 - ISO 69-2-point OGV ring angled at 5. - Open end angled at 5 from handle axis. - 6-point heads up to 2 x 4 mm. D D 5 5 mm mm mm mm mm mm d mm» d mm mm Weight g 7 9 7.8 9.3 6.5 7.5 6 6.5 39 4 3258952300 E7388 8 0 7.8 9.3 6.5 7.5 6 7 39 4 32589573886 E739 3 22.8 25.3 6.5 7.5 6 7 74 82 3258957396 E7392 2 4 22.8 25.3 8.5 0.5 9 74 77 32589573923 E7394 7 9 3.2 33 2 3 4 5 23 82 32589573947 E7395 9 22 33.4 38.4 3 4 5 7 228 229 32589573954 E7368 24 27 42.4 46.4 6 7 8 20 255 42 32589573688 E230 EN www.expert-tool.com 43
WRENHES SET OF 5 FRE-NUT WRENHES 6-POINT X 6-POINT - Supplied on plastic rack. ontent set Qty Weight g EN E250 7x9-8x0-x3-2x4-7x9 mm. 5 470 3258952504 DJUSTE WRENHES DJUSTE WRENHES - ISO 6787 - DIN 37 - SME 07.8 M - Head tilted at 5 for a 30 deflection angle when flipped. - Hardened chrome-vanadium steel body. - Presentation: chromed, polished faces. - Right-hand knob rotation. - Registred model. - Reduced nose thickness for better access. - Round handle design for better ergonomics. - Fully Tempered and hardened jaws. mm mm mm mm Weight g EN E87366 20 46 0.8 6" - 50 30 325895873663 E87368 24 57.4 3.5 8" - 200 240 325895873687 E87470 29 69.8 6 0" - 250 440 325895874707 E87472 34 82.3 9 2" - 300 700 32589587472 E87473 44 04.3 25 5" - 375 290 325895874738 E7905 55 20 26 8" - 450 950 32589579055 E7906 62 32 3 24" - 600 3225 32589579062 44
HOOK ND PIN WRENHES HOOK ND PIN WRENHES - Sizes cover 9 to 59mm. - Hardened hrome Vanadium steel body. mm mm Weight g EN E260 9-5 65 30 325895260 E2602 32-76 26 225 32589526028 E2603 5-2 267 455 32589526035 E2604 4-59 308 490 32589526042 SFFODING WRENHES SFFODING WRENHES - Special for scaffolding assembly/disassembly. - 32 tooth mechanism. - Direction switch by built-in protected control. - Double sided mechanism for two sizes per wrench: E096: 7 x 9 mm. E0962: 2 x 22 mm. - Finish: Zinc. mm mm mm mm Weight g EN E096 40.7 7 50 309 430 3258950968 E0962 40.7 7 50 309 74 32589509625 SFFOD WRENH 9MM - ISO 69 - Designed for scaffolding assembly/disassembly. - Head machined to be used as a hammer. - Hole in handle to fasten a hand strap for working in high places. - lack phosphate finish. NEW mm mm mm Weight g EN E430 65 28.5 270 780 3258954308 www.expert-tool.com 45