1 HydroFill battery watering carts Water where you want it, when you want it HYDROFILL TM 1 Product description Easy to manipulate: handles like a hand truck Easy to use Easy to fill: large opening ON/OFF switch located on the rear of the unit Sealed rechargeable battery is included. Charge the unit from any 230V AC outlet with the provided charger Sturdy 37.8 liter tank 3 meter hose
2 2 User instructions Step Instruction 1 Attach the water caddy to the charger 2 Plug in the charger 3 Charge the battery of the water caddy for 13h 4 Open the lid of the water caddy 5 Fill it up with deionised water 6 Close the lid of the water caddy 7 Attach the water gun (7A) or the aqua string to the water caddy outlet 8 Activate the water caddy 9 The pump will start up 10 Fill the battery cells 11 Turn off the water caddy
3 3 Features and specifications Features Large capacity, sturdy 37.8 liter tank Compact size 2 wheel configuration Built-in 12 volt sealed rechargeable battery Fully automatic battery charger Shipped ready to use As standard the HydroFill TM is supplied with a quick connect fitting. Adapters are available if other types of fittings are required. When used with an automatic battery filling system, we recommend the use of a filling adapter (WCA- FA-ACC003C) (output 0.65 bar) When combined with the Philadelphia Scientific water deioniser system, the HydroFill TM forms part of the most effective battery maintenance programme available, reducing waste and saving time and money. Specifications Cart operating voltage: 12V Operating current: 7.5A Nominal power consumption: 90W Onboard power: 12V 7Ah maintenance free battery Charger operating voltage: 230V 50Hz 2-pin plug Capacity: 37.8l Water pressure: Ca. 1.5 bar Max flow: 7l/min Output hose length: 6m 4 Options WCA-FA-ACC003C Filling adaptor When working with the HydroFill TM, it is strongly advised to add the WCA-FA-ACC003C when an automatic filling system with floats is used. This float system makes sure that the battery doesn t overflow when being filled. Water coming from the HydroFill TM water caddy is under too high pressure for the float system to operate in a safe way, resulting in an overflowing battery. The filling adapter will make sure that the pressure of the water is reduced to an acceptable level, so that the battery can be filled without spilling.
4 CRT-E210 Adaptor This part is an adaptor to go from the BFS connector to the Quick Connect so that the GUN-X can be used with the cart. Water gun Different types of water guns can be connected to the HydroFill TM water caddy: with or without automatic stop, with or without an auditory signal to indicate the water level. More info can be found at http://www.vandapower.com/site/products/aqua-toebehoren/waterpistolen/waterguns%20- %20product%20sheet%20V1512.pdf 5 Product code Water caddy 38l - without water gun WCA2-LD-2
5 HydroFill battery watering carts Water where you want it, when you want it HYDROFILL PRO TM 1 Product description Easy to manipulate 3 meter hose Large LCD display with real-time feedback Huge 60 liter capacity tank Optional integrated deioniser Sealed rechargeable battery Wear resistant and durable design
6 2 User instructions Step Instruction 1 Attach the water caddy to the charger 2 Plug in the charger 3 A CHARGING message will appear on the screen 4 Charge the battery of the water caddy for 13h 5 The display indicates when the battery is fully charged 6 Unplug the charger 7a-7b Open the lid of the water caddy 8a-8b Fill it up with deionised water 9a-9b Close the lid of the water caddy 10 Attach the water gun (10A) or the aqua string (10B) to the water caddy outlet 11 Activate the water caddy 12 The pump will start up 13 Fill the battery cells 14 After 10 minutes, the water caddy will turn off automatically 14b Turn off the water caddy manually
7 3 Features and specifications Features Increased capacity: 60 liter tank Instant feedback via tactile LCD display Integrated deioniser (optional) Battery powered Monitoring device for output water purity Battery discharge indicator Low water alert Diagnostic information Multi-language Specifications Maximum Capacity: 60l Height: 1000mm Width: 350mm Output hose length: 3m Water pressure: 1bar Wheel size: 150mm Shipping weight: 8kg Max weight: 72,7kg Controls: Single button and 16x2 line OLED display 4 Options WCA-FA-ACC003C Filling adaptor When working with the HydroFill TM, it is strongly advised to add the WCA-FA-ACC003C when an automatic filling system with floats is used. This float system makes sure that the battery doesn t overflow when being filled. Water coming from the HydroFill TM water caddy is under too high pressure for the float system to operate in a safe way, resulting in an overflowing battery. The filling adapter will make sure that the pressure of the water is reduced to an acceptable level, so that the battery can be filled without spilling. CRT-E208 - Timer Because the HydroFill TM Pro with deioniser takes 30 minutes to fill up (due to the fact that the flow rate cannot be more than 2 liters per minute through the deioniser cartridge), the timer is intended to automatically cut off after 30 minutes (or a time setting the customer specifies).
8 CRT-E210 Adaptor This part is an adaptor to go from the BFS connector to the Quick Connect so that the GUN-X can be used with the cart. Water gun Different types of water guns can be connected to the HydroFill TM water caddy: with or without automatic stop, with or without an auditory signal to indicate the water level. More info can be found at http://www.vandapower.com/site/products/aqua-toebehoren/waterpistolen/waterguns%20- %20product%20sheet%20V1512.pdf 5 Product code Water caddy 60l - without water gun WCA60
9 Manually pressurized filling caddy PT15 PRESSURIZED TANK 1 Product description Comfortable ergonomic handle 1.8 meter hose, resistant to heat and frost Lance Safety valve PVC hose at the end of the lance 15 liter tank
10 2 User instructions
11 3 Features and specifications Features Net capacity (: 12 liter tank Maximum capacity: 15 liter tank Working pressure: 3 bar Weight: 3.4kg The maximum capacity is the quantity of liquid that the sprayer can contain if it is considered just as a container/tank. The net capacity is the actual quantity of liquid you can pour into the sprayer, considering that there has to be the place for the piston and the air pressure. 4 Product code Pressure tank with trolley 15 l with gun PT15-CAR