T8 Tube Light Ideal for decorative and ambient lighting in retail outlets, hotels, warehouses, government buildings, and multi- unit residences T8 Tube Light UL LISTED & cul LISTED & DLC LISTED Germany Patent: Gebrauchsmusters / Nr. 20 2011 052 005.6 Japan Patent: Registration : 3173203 High efficacy accent light 50,000-hour rated average life Superior color rendering with 80CRI Instant-on light Emits virtually no UV/IR light in the beam Contains no mercury Unsurpassed light uniformity * Easy to experience Offers omni-directional light for ambient illumination 5 years limited warranty
T8 Tube Light Product specification (Subject to change without notice) Power (watts) Dimension Light source Light base Certification Warranty LSM-T812-21WE09 21W Dia.26 x 1198mm SMD2835*144pcs G13 UL, cul, DLC, CE, ROHS 5 years LSM-T812-23WE09 23W Dia.26 x 1198mm SMD2835*144pcs G13 UL, cul, DLC, CE, ROHS 5 years Electrical and Technical Data (Subject to change without notice) Power (watts) Input Voltage Input Frequency View Angle PF Rated Avg. Life (Hours) Approx. Lumens @4000K Approx. Lumens @5000K, 6000K LSM-T812-21WE09 21W 100-277V 50-60Hz 120 >0.99 50,000 2500lm-clear cover 2570lm-clear cover Min.80 CRI Color Temp. (Kelvin) 4000-6000 LSM-T812-23WE09 23W 100-277V 50-60Hz 120 >0.99 50,000 2650lm-clear cover 2770lm-clear cover Min.80 4000-6000 Shipping Data (Subject to change without notice) Inner box Dimensions (L x W x H) (mm) Carton Dimensions (L x W x H) (mm.) Qty. of Per Carton LSM-T812-21WE09 1230 x 45 x 45 1250 x 215 x 220 25pcs 18.0 LSM-T812-23WE09 1230 x 45 x 45 1250 x 215 x 220 25pcs 18.0 Per Carton Gross Weight (KG) Approx. Qty. of per 20 container (pcs.) Approx. Qty. of per 40 container (pcs.) Size Diagram (Dimensions in mm) Photometry: LT-T812-21WE09
Quick Install ation Guide T8 Tube Light Energy Saving Data Energy Efficient, Reduces carbon dioxide emissions Estimated Lighting Costs Using a 36W Fluorescent Lamp Present Wattage x Annual Operating Hours Total Estimated Annual Savings = $627 Reducing carbon dioxide emissions: 8 ton CO2 /year Based on 100 lamps per space operating at 3,000 hours per year. This energy saving example shows an application of 100 Tube Lights in a space currently using 100 fluorescent 36W, operating 3,000 hours per year at a cost of $0.11 per kwh. Your actual savings may vary depending on the energy costs in your geographic location. 40 W 3,000 hrs 120,000 watt-hours = 1,000 = 120 kwh per year x kwh rate of $0.11 = $ 13.2 per year x 100 lamps per space = $ 1320 annual energy cost per space Estimated Lighting Costs Using a 21W T8 Tube Present Wattage Light 21 W x Annual Operating Hours 3,000 hrs = 63,000 watt-hours 1,000 = 63 kwh per year x kwh rate of $0.11 = $6.93 per year x 100 lamps per space = $693 annual energy cost per space Replacing 100 standard 36W fluorescent tubes with the 18W This LED T8 tubes can provide significant energy cost savings of $627 per year! Potential savings from the reduction savings from the reduction in HVAC costs as a result of using a lower wattage bulb that emits less heat is an additional benefit not included in this example.
Instruction Note: All wires must be joined by insulated tape and terminal block as follows: Accessibility of a live part is prohibited. Only qualified electrician is permitted to install this Tube Light. Packing
WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 1. Risk of fire or electric shock. The electrical rating of these products are 100~277V. The installer must determine whether they have 100~277V at the luminaire before installation. 2. Risk of fire or electric shock. Luminaires wiring, ballasts, or other electrical parts may be damaged when installing of reflector kit hardware. Check for enclosed wiring and components. 3. Risk of fire or electric shock. Reflector kit installation requires knowledge of fluorescent lighting luminaires electrical systems. If not qualified, do not attempt installation. Contact a quali fied electrician. 4. Risk of fire or electric shock. Install this kit only in the luminaires that has the construction features and dimensions shown in the photographs and/or drawings. 5. To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. 6. Do not make or alter any o pen holes in an enclosure of wiring or electrical components during kit installation DANGER-RISK OF SHOCK-DI SCONNECT POWER BEFORE INSTALLATION. CAUTIONS: 1. Suitable for dry and damp l ocations. 2. Do not use with Dimmers. 3. Not for use in totally enclo sed luminaires. 4. This device is not intended f or use with emergency exit fixtures or emergency lights. 5. Before replacing, turn off p ower and let lamp cool to avoid electrical shock or burn. 6. Risk of electric shock. Do n ot use where directly exposed to water. 7. This device is not intended for use with emergency exits. 8. Lamps must be operated w ithin an ambient fixture temperature of - 22F (- 30c) and 113F (45c) co comply with all safety and w arranty regulations. Light and Energy International, LLC, P.O. Box 51960, Sparks, NV 89434 USA