EAGLE SERIES VALVES E3 AND E SERIES A A Solenoid coil is available in AC or DC with LED and plug-in connector or wire leads. B Manual plunger provides valve actuation with no electrical power. B C Valve body is tapped #10-3 and may be mounted inline or on matching s. D Solenoid quality stainless steel plunger with precision-ground elastomer seal. A C D E3 B C Specially coated valve body D Balanced spool construction with precision ground molded spool assembly (no o-rings). E Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com 35
E3 SERIES VALVES VALVE NUMBERING SYSTEM Electrical Connection T - Terminal W - Wire E 3 - - Voltage 01-1 VDC 0 - VDC 10-10 VDC A - VAC Series Port A- Manifold Mounting (not tapped) Mounting hardware furnished 1-10-3 Electrical Options L - LED & Diodes R - Rectifier (req d w/ or 10 VAC) O - None The Eagle (E-3) 3-way valve is a direct acting, non-piloted, two-position, plunger type valve. There is one port, one port and one. The ports are tapped 10-3 on the surface mount valves and drilled.06 on the style. The straightforward operation of this poppet style valve will function for millions of trouble free cycles. Operated by a single solenoid, the E-3 valve is designed to perform numerous tasks, whether a single valve is needed or a stack mounted on s. The E-3 is available with a AC or DC coil and offers special features with each. Although compact in size, the E-3 valve provides quick response time and a high flow rate. The ease of installation, compact size and performance mean both time and money. Type: 3-way plunger type Material: body - anodized aluminum coil - epoxy encapsulated Temperature Range: 30-180 F Medium: air (lubricated or non-lubricated) Flow Rate: 1.1 scfm @ 100 psig 0.65 scfm @ 50 psig Voltage: 1 or VDC and or 10 VAC Power Consumption: 1. watts DC without LED; 1.6 watts DC with LED VAC = 1.6 watts; 10 VAC = 3.0 watts Operating Pressure: 0 to 105 psig Response: <10 ms Features Made in the USA Compact size Low power requirement Manual for solenoids Plug-in connector or wire leads M5 metric threads available Numerous models AC or DC coils Manifold mounts available from one to twelve stations 36 Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com
E3 SERIES VALVES E3-1TL- DC + AC DC- AC socket amp #103635- for plug amp #103960- (supplied with valve w/18" 6 Ga. leads) 1.330 1.095 Mounting: There are two mounting holes for 3-56 screws Ports: Valve body tapped for 10-3 ports.09 port #10-3 thd..08 dia..186.57 mounting holes.15 dia. places.68.80.50.59.79 1 port #10-3 thd. E3-1TR- DC + AC DC - AC socket amp #103635- for plug amp #103960- (supplied with valve w/18" 6 Ga. leads) 1.330 1.095 Mounting: There are two mounting holes for 3-56 screws Ports: Valve body tapped for 10-3 ports.09 port #10-3 thd. exhuast.08 dia..186.57 mounting holes.15 dia. () places.68.80.50.59.79 1 port #10-3 thd. E3-ATL- DC + AC DC - AC socket amp #103635- for plug amp #103960- (supplied with valve w/18" 6 Ga. leads) 1.330 1.095 Mounting: Manifold Ports:.06 ports for.09.96 3 1.80.18.36 mounting holes for 3-56 socket head screw () places.01.01.01.063.39 all ports:.06 dia. passage.167 dia. x.03 deep spotface (for 3809-6 o-ring) E3-ATR- DC + AC DC - AC socket amp #103635- for plug amp #103960- (supplied with valve w/18" 6 Ga. leads) 1.330 1.095 Mounting: Manifold Ports:.06 ports for.09.96 3 1.80.18.36 mounting holes for 3-56 socket head screw ( places).01.01.01.063.39 all ports:.06 dia. passage.167 dia. x.03 deep spotface (for 3809-6 o-ring) Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com 37
E3 SERIES VALVES E3-1TO- socket for plug amp #103960- (supplied with valve w/18" 6 Ga. leads) 1.135.865 Mounting: There are two mounting holes for 3-56 screws Ports: Valve body tapped for 10-3 ports.08 dia..186.57 mounting holes.15 dia. () places.68.80.59.79.50 port #10-3 thd. port #10-3 thd. E3-1WO- 1.15 Mounting: There are two mounting holes for 3-56 screws Ports: Valve body tapped for 10-3 ports.08 dia..186.57 mounting holes.15 () places.68.80.59.79.50 1 port #10-3 thd. port #10-3 thd. E3-ATO- socket for plug amp #103960- (supplied with valve w/18" 6 Ga. leads) 1.135.865 Mounting: Manifold Ports:.06 ports for.96.18.36 mounting holes for 3-56 socket head screw ( places) 3 1.01.80.01.01.063.39 all ports:.06 dia. passage.167 dia. x.03 deep spotface (for 3809-6 o-ring) E3-AWO- 1.15 Mounting: Manifold Ports:.06 ports for.96.18.36 mounting holes for 3-56 socket head screw ( places) 3 1.01.80.01.01.063.39 all ports:.06 dia. passage.167 dia. x.03 deep spotface (for 3809-6 o-ring) 38 Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com
E3 SERIES MANIFOLDS C3-RBX18 C3-WXB18 Lead Set Chart For E3/E Valve Part No. Used On Wire Colors pin 1 pin pin 3 Lead Length Wire gage C3-RXB18 E3/E (DC) red black ~ 18 6 C3-WXB18 E3/ER (AC) white ~ black 18 6 E3M-MH Mounting hardware E3M-CP Cover plate.060 O-Ring.087 ID x.167 OD x.00 cs (6) pieces.600.37 Socket head cap screw #3-56 thd. x long () pieces Zinc plated steel Buna N gasket.31.109 dia..08 E3M-01 Single Station Manifold.15.15.65 mounting holes for # screw or tapped for #6-3 screw.313.65 valve centerline.166.3.169.517 3 #10-3 thd. ports in 1.5 Material: anodized aluminum E3M- Multi-station Manifold.187.50 #10-3 thd. +.003.03 -.001 dia. thru holes.03 dia. - thru mounting holes 1 3.750.65 typ. valve centerline typ. #3-56 thd. valve mounting holes 1 3.156 Dash # Stations Dim. L Dim. C E3M-1 1.65 E3M-.15 1.750 E3M- 3.375 3.000 E3M-6 6.65.50 E3M-8 8 5 5 E3M-10 10 7.15 6.750 E3M-1 1 8.375 8.000 #10-3 thd..187.187 typ..750.65 typ. #10-3 thd. outlet "C" "L" Material: anodized aluminum Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com 39
E SERIES VALVES The entire Clippard compact Eagle valve line has been designed to meet today s fluid power engineering needs. Advanced features have been added to readily meet tomorrow s manufacturing requirements. E VALVE NUMBERING SYSTEM Secondary Actuator E - Electric Pilot P - Pneumatic Pilot S - Spring Return A - Air Return Primary Actuator E - Electric Pilot P - Pneumatic Pilot E - 1 - - Electrical Connection W - Wire T - Terminal 0 - None Optional Package L - LED & Diode 0 - None R - Rectifier (req d w/ or 10 VAC) Voltage 01 1 VDC 0 VDC 10 10 VAC A VAC By connecting a pressure greater than 30 psig to the auxiliary pilot port, the valve can still be actuated normally, but the main valve can range from 150 psig down to zero and into moderate vacuum. The valve can then be used below its normal operating pressure from vacuum to 105 psig as long as the pilot operating pressure is above 30 psig. The internal/auxiliary pilot feature is standard on every Eagle -way valve. Features Made in the USA Compact in size, yet with true 10-3 flow: 9 + scfm Low power requirement.. a mere 1. watts DC, and 1.6 with LED M5 metric threads available Auxiliary pilot port for low pressure applications. Balanced spool construction with precision ground molded spool assembly (no o-rings); the spool travels in a specially coated valve body that is tapped 10-3; the valve can be mounted inline or on matching s with matched input and ports Exhaust can be controlled with a needle valve or can be piped away Manual for solenoids Plug-in connector and signal LED, plus spike protection; optional electric input through 18 wire leads or plug-in connector only 30 models available with 1 or VDC, or 10 VAC piloted; also available with pneumatic pilot operation Manifolds for, 6, 8, 10, 1 stations; EMC card available Special Feature: A unique feature of the Clippard Eagle valve is the internal/auxiliary pilot that allows the pilot section of valve to be powered by the valves pressure (as long as it is above 30 psig) or by an external pressure that is above 30 psig. When operated on the internal pressure, the valve operates in the 30 to 105 psig range. The auxiliary pilot port remains plugged. 0 Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com
E SERIES VALVES NUMBERING E-1EA- - SYSTEM Air return single solenoid Type: -way -position spool valve Medium: air (lubricated or non-lubricated); moderate vacuum Flow Rate: (Cv 0.1) 9.3 scfm @ 100 psig 5 scfm @ 50 psig Voltage: 1 or VDC and or 10 VAC piloted Power Consumption: 1. watts DC without LED; 1.6 watts DC with LED; VAC 1.6 watts; 10 VAC 3.0 watts Operating Pressure: 30 to 105 psig Vacuum: 5 InHg (external pilot required) Response: 30 ms (on and off) Mounting: There are three mounting holes for 3-56 screws E-1EA-TL-0 E-1EA-TO-O E-1EA-WO-0 Ports: Valve body tapped for 10-3 ports (port #5).81 (port #3) AC DC - AC DC +.68.3 socket amp #103635- for plug amp #103960- (supplied with valve w/18" x 6 Ga. leads) LED 3.6.75.50 3.335 mounting holes (3) for 3-56 socket head cap screws 3 1 1.30.688.3 (port #) (other side) 1.105.15.18.718 (port #) (other side) Note: All ports are #10-3 thd. auxillary pilot (port #1) (plugged) mounting holes ().15 dia. thru 1.150.06 1.15 port # port # (port #1).805 1.17 (port #) (port #).163 Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com 1
E SERIES VALVES E-1EE- - Double solenoid Type: -way -position spool valve Medium: air (lubricated or non-lubricated); moderate vacuum Flow Rate: (Cv 0.1) 9.3 scfm @ 100 psig 5 scfm @ 50 psig Voltage: 1 or VDC and or 10 VAC piloted Power Consumption: 1. watts DC without LED; 1.6 watts DC with LED; VAC 1.6 watts; 10 VAC 3.0 watts Operating Pressure: 30 to 105 psig Vacuum: 5 InHg (external pilot required) Response: 30 ms (on and off) AC AC E-1EE-TL-0 E-1EE-TO-O E-1EE-WO-0 DC - DC + LED (port #5).90.50 5.318.688.3.81 (port #3).68.3 mounting holes (3) for 3-56 socket head cap screws 5.060 Mounting: There are three mounting holes for 3-56 screws Ports: Valve body tapped for 10-3 ports DC + AC DC - AC socket amp #103635- for plug amp #103960- (supplied with valve w/18" x 6 Ga. leads) 31 1.30.15 1.105 auxillary pilot (port #1) (plugged) mounting holes ().15 dia. thru 1.06.06 1.15 port # port #.751 (port #1) 1.150 1.150 (port #) Note: All ports are #10-3 thd..18 (port #).718 1.17 1 (port #) 1.70 (port #) auxillary pilot.163 (port #1) (plugged) Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com
E SERIES VALVES E-1EP- - Air pilot return single solenoid Type: -way -position spool valve Medium: air (lubricated or non-lubricated); moderate vacuum Flow Rate: (Cv 0.1) 9.3 scfm @ 100 psig 5 scfm @ 50 psig Voltage: 1 or VDC and or 10 VAC piloted Power Consumption: 1. watts DC without LED; 1.6 watts DC with LED; VAC 1.6 watts; 10 VAC 3.0 watts Operating Pressure: 30 to 105 psig Vacuum: 5 InHg (external pilot required) Response: 30 ms (on and off) Mounting: There are three mounting holes for 3-56 screws E-1EP-TL-0 E-1EP-TO-O E-1EP-WO-0 Ports: Valve body tapped for 10-3 ports (port #5).81 (port #3) AC AC DC+ DC-.3.68 socket amp #103635- for plug amp #103960- (supplied with valve w/18" x 6 Ga. leads) 3 1 1.30 1.105 LED 3.53.35 mounting holes ().15 dia. thru NOTE: all ports are #10-3 thd..50 1.150 3.05.688.3.06 1 1.15 mounting holes (3) for 3-56 socket head cap screws.15 port # port # (port #1) 1.06 (port #) pneumatic p (port #1).18 (port #) auxillary pilot (port #1) (plugged) (port #).17 (port #).163 Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com 3
E SERIES VALVES E-1ES- - Spring return single solenoid Type: -way -position spool valve Medium: air (lubricated or non-lubricated); moderate vacuum Flow Rate: (Cv 0.1) 9.3 scfm @ 100 psig 5 scfm @ 50 psig Voltage: 1 or VDC and or 10 VAC piloted Power Consumption: 1. watts DC without LED; 1.6 watts DC with LED; VAC 1.6 watts; 10 VAC 3.0 watts Operating Pressure: 30 to 105 psig Vacuum: 5 InHg (external pilot required) Response: 30 ms (on and off) Mounting: There are three mounting holes for 3-56 screws E-1ES-TL-0 E-1ES-TO-O E-1ES-WO-0 Ports: Valve body tapped for 10-3 ports (port #5).81 (port #3) AC AC DC - DC +.3.68 socket amp #103635- for plug amp #103960- (supplied with valve w/18" x 6 Ga. leads) 3 1 1.30 LED 3.6.75.50 3.335.688.3 mounting holes (3) for 3-56 socket head cap screws (port #) (other side).718.18 1.105 (port #) (other side) mounting holes ().15 dia. thru.06 NOTE: all ports are #10-3 thd. 1.150 1.15.15 port # port # (port #1).805 auxillary pilot (port #1) (plugged) 1 (port #).17 (port #).163 Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com
E SERIES VALVES E-1PS-00-000 Single pneumatic spring.50 mounting holes (3) for 3-56 socket head cap screw Type: -way -position spool valve Medium: air (lubricated or non-lubricated); moderate vacuum Flow Rate: *(CV 0.1 9.3 scfm @ 100 psig/ 5 scfm @ 50 psig.3.68 Operating Pressure: 0 to 105 psig Vacuum: 5 InHg (port #3).81 "B" (port #5) Mounting: There are three mounting holes for 3-56 screws pilot "A" (port #1) 1.680.688.3 Ports: Valve body tapped for 10-3 ports.06 "B" (port #) "A" (port #).18.718.163 1.15.06.15 mounting holes ().15 dia. thru Note: all ports are #10-3 thd. "A" (port #) "B" (port #).17 (port #1).805 E-1PP-00-000 pilot "A" (port #1) Double pneumatic pilot.50 (port #3) 1.750.688.3.81 mounting holes (3) for 3-56 socket head cap screws.3.68 "B" (port #5) pilot "B" (port #1) Type: -way -position spool valve Medium: air (lubricated or non-lubricated); moderate vacuum Flow Rate: *(CV 0.1 9.3 scfm @ 100 psig/ 5 scfm @ 50 psig Operating Pressure: 0 to 105 psig Vacuum: 5 InHg Mounting: There are three mounting holes for 3-56 screws Ports: Valve body tapped for 10-3 ports.06 "B" (port #) "A" (port #).18.718 1.15.06.15 mounting holes ().15 dia. thru.163 "A" (port #) "B" (port #) Note: all ports are #10-3 thd..17 (port #1) Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com 5
E SERIES MANIFOLDS C3-RBX18 C3-WXB18 Lead Set Chart For E3/E Valve Part No. Used On Wire Colors pin 1 pin pin 3 Lead Length Wire gage C3-RXB18 E3/E (DC) red black ~ 18 6 C3-WXB18 E3/ER (AC) white ~ black 18 6 EM-MH Mounting hardware EM-CP Cover plate.060 O-Ring.087 ID x.167 OD x.00 cs (6) pieces Socket head cap screw #3-56 thd. x long () pieces.600.31.109 dia..37.08 EM-01P.193 1.15 1/8-7 NPT (3) places.750 IN.188.313.6 B 1.50.65 A.31 clearance hole for #10 screw () places mounting holes.31 EM- #3-56 thd. valve mtg holes "C".03 dia. -.65 deep #10-3 thd. - thru () places.68.563.819 1.15.156 typ..3 typ..906.65 typ. valve centerline typ. #10-3 thd. () ports per station.03 dia. - thru () places 1/-18 NPT both ends Dash # Stations Dim. L Dim. C.18.718-0 3.687 3.000-06 6.50 1.058.65 typ. "L" -08 8 6.187 5-10 10 7.37 6.750-1 1 8.687 8.000 6 Clippard Instrument Laboratory, Inc. (513) 51-61 www.clippard.com