Rocket High Performance Injector The Rocket injector was designed to be the most versatile venture injector in the marketplace. A superior design that can handle any task you throw at it. Designed to be serviceable and designed to be injectors for a lifetime and not a season. The Rocket is the most efficient competitive injector, with the lowest pressure loss amongst competitive units, delivering more pressure for any application. It enables cleaning at greater pressure while consuming less chemicals. It s effortless to repair. With the use of a removable nozzle and metering barb, it makes maintenance and repair extremely simple, extending the life of the injector and reducing the cost of ownership. It has the greatest range of any injector on the market. It leads the industry by running the breadth of operating pressures and by covering the extreme range of dilution ratio Single Part # Repair Kit GPM Color Price IN211057 INK21057 1.1 GPM Red $$ IN211070 INK21070 1.7 GPM Orange $$ IN211083 INK21083 2.4 GPM Grey $$ IN211086 INK21086 2.6 GPM Blue $$ IN211098 INK21098 3.4 GPM Light Green $$ IN211125 INK21125 5.3 GPM Dark Green $$ Single Check Valve Repair Kit - INK21001 Dual Part # Repair Kit GPM Color Price IN221057 INK22057 1.1 GPM Red $$ IN221070 INK22070 1.7 GPM Orange $$ IN221083 INK22083 2.4 GPM Grey $$ IN221086 INK22086 2.6 GPM Blue $$ IN221098 INK22098 3.4 GPM Light Green $$ IN221125 INK22125 5.3 GPM Dark Green $$ Dual Check Valve Repair Kit - INK21002 B Series Injectors C Series Injectors Incorporates an externally adjustable, internal by-pass valve plus a chemical injection metering screw. It eliminates need of water flow nozzle bushings, extends flow range of injector and adapts easily to variations in liquid flow. Injectors have adjustable stainless steel metering screw for adjustments to chemical injection. Max Temp. 180º F. **Metering tip model also available Adjustable Water Flow Part # Pipe Size Price IN2003C 1/8 $$ IN200C 1/8 $$ IN206B Part # Pipe Size Price IN202B 3/8 $$ IN203B 3/8 $$ IN204B 1/2 $$ IN206B 3/4 $$ Metering tip model also available IN202C 1/4 $$ IN203C 3/8 $$ IN204C 1/2 $$ IN206C 3/4 $$ IN208C 1 $$ 687
Hydra-Flex Chem-Flex Chemical Injectors 3/8 NPT Stainless Steel Inlet and Outlet Ports. Rated to 1000 PSI and 175 F Dual material construction combines the excellent corrosion and chemical resistance of Kynar with the mechanical strength of stainless steel. Single Dual Tri PLACE YOUR ORDER ONLINE ANYTIME! www.kleen-ritecorp.com LIVE CHAT Monday - Friday: 9am-5pm EST Single Flow Rate - 200 PSI Part # GPM Nozzle Size Color Price IN118057 1.0.057 Red $$ IN118070 1.5.070 Orange $$ IN118083 2.0.083 Grey $$ IN118086 2.25.086 Blue $$ IN118098 3.25.098 Light Green $$ IN118125 5.5.125 Dark Green $$ Dual - 60 Flow Rate - 200 PSI Part # GPM Nozzle Size Color Price IN129057 1.0.057 Red $$ IN129070 1.5.070 Orange $$ IN129083 2.0.083 Grey $$ IN129086 2.25.086 Blue $$ IN129098 3.25.098 Light Green $$ IN129125 5.5.125 Dark Green $$ Tri - 60 Flow Rate - 200 PSI Part # GPM Nozzle Size Color Price IN139057 1.0.057 Red $$ IN139070 1.5.070 Orange $$ IN139083 2.0.083 Grey $$ IN139086 2.25.086 Blue $$ IN139098 3.25.098 Light Green $$ IN139125 5.5.125 Dark Green $$ Like us @ facebook.com/kleenritecorp Chemical Injectors Forged brass housing Viton O-Rings Stainless steel spring Stainless steel ball 3/8 Male NPT inlet 3/8 Female NPT outlet 1/4 Hose Part # Orifice Price SUT60-1.8 1.8 $$ SUT60-2.1 2.1 $$ SUT60-2.4 2.4 $$ 688
Cat Injectors Adjustable Part # GPM Orifice PU07112 3-4 1.8 MM PU07113 4-5 2.1 MM PU07114 5-6 2.3 MM Stainless Steel Chemical Injector Stainless Steel Ball, Stainless Steel Nozzle EPDM Elastomers 5500 PSI 3/8 M Inlet/Outlet Max PSI 3145 3/8 M x M Viton O-ring Max Temp 180º F SS Orifice CALL Part # Orifice GPM Hose Price GPP100075 1.45 mm 1.0-2.0 1/4 $$ GPP100093 2.1 mm 2.0-4.0 1/4 $$ GPP100074 2.2 mm 3.0-5.0 1/4 $$ GPP100076 2.5 mm 5.0-8.0 1/4 $$ GPP100541 2.1 mm 3.0-5.0 1/4 Dual $$ Stainless Steel Chemical Injector Stainless Steel Ball, Stainless Steel Nozzle, Viton Elastomers 5500 PSI 3/8 M Inlet/Outlet CPVC Chemical Injector Teflon Ball, CPVC Nozzle, Kynar Hose 4500 PSI 1/4 Hose Viton O-Ring Part # Orifice GPM Hose Price GPP100336 1.45 mm 1.0-2.0 1/4 $$ GPP100094 1.6 mm 2.0-3.0 1/4 $$ GPP100835 1.8 mm 2.0-3.0 1/4 $$ GPP100334 2.1 mm 2.0-4.0 1/4 $$ GPP100333 2.2 mm 3.0-5.0 1/4 $$ GPP100339 2.5 mm 5.0-8.0 1/4 $$ Stainless Steel Chemical Injector Teflon Ball, Stainless Steel Nozzle Kynar Hose 1/4 Hose EPDM O-Ring 3/8 Intlet/Outlet Part # Orifice GPM Outlet Inlet/ Price GPP100938 1.6 mm 2.0-3.0 3/8 M $$ GPP100853 2.1 mm 3.0-5.0 3/8 M $$ GPP100955 1.4 mm 1.0-2.0 1/2 M $$ GPP100956 1.6 mm 2.0-3.0 1/2 M $$ GPP100957 2.1 mm 3.0-5.0 1/2 M $$ Metering Tip Kit INDK100-15K $$ GPP100096 1.45 mm 1.0-2.0 $$ GPP100097 2.2 mm 3.0-5.0 $$ 689
ADJUSTABLE SIPHON INJECTOR 1 square brass Max Press.; 4000 PSI Flow; 0.5-6.0 GPM 3/8 or 1/2 Thread connection Indexed metering screw for consistent, adjustable siphon control (Dial Control Design) Lock-nut on metering screw to hold siphon setting during system vibration Use in 2-fluid application when pre-mix is involved Part # Thread GPM Price SSI50586-10 3/8 1.0 $$ SSI50586-15 3/8 1.5 $$ SSI50586-20 3/8 2.0 $$ SSI50586-25 3/8 2.5 $$ SSI50586-40 3/8 4.0 $$ SSI50586-50 3/8 5.0 $$ SSI50586-60 3/8 6.0 $$ SSI50588-05 1/2 0.5 $$ SSI50588-10 1/2 1.0 $$ SSI50588-15 1/2 1.5 $$ SSI50588-20 1/2 2.0 $$ SSI50588-25 1/2 2.5 $$ SSI50588-30 1/2 3.0 $$ SSI50588-40 1/2 4.0 $$ SSI50588-50 1/2 5.0 $$ SSI50588-60 1/2 6.0 $$ Brass Chemical Injector Ceramic Ball, Stainless Steel Nozzle, Viton Elastomers, High Draw Injector 4500 PSI, 190 F Max Temp, 1/4 Hose, 3/8 M Inlet/Outlet Brass Chemical Injector Teflon Ball, Stainless Steel Nozzle, Viton Elastomers, Hastelloy Spring 4000 PSI, 190 F Max Temp, 3/8 M Inlet/Outlet, 1/4 Hose GPP100947 1.6 mm 2.0-3.0 $$ GPP100948 1.8 mm 2.0-3.0 $$ GPP100949 2.1 mm 3.0-5.0 $$ GPP100950 2.3 mm 5.0-8.0 $$ GPP100871 1.5 mm 1.0-2.0 $$ GPP100872 2.3 mm 5.0-8.0 $$ GPP100854 1.5 mm 1.0-2.0 $$ Brass Chemical Injector Stainless Steel Ball, Stainless Steel Nozzle, Viton Elastomers 4000 PSI, 190 F Max Temp, 1/4 Hose, 3/8 M Inlet/Outlet GPP100913 1.45 mm 1.0-2.0 $$ GPP100615 1.8 mm 2.0-3.0 $$ GPP100511 2.1 mm 3.0-5.0 $$ Stainless Steel Chemical Injector Stainless Steel Ball, Stainless Steel Nozzle, Special Elastomers 5500 PSI, 190 F Max Temp, 3/8 M Inlet/Outlet, 1/4 Hose GPP100336S 1.45 mm 1.0-2.0 $$ GPP100334S 2.1 mm 2.0-4.0 $$ GPP100333S 2.2 mm 3.0-5.0 $$ GPP100339S 2.5 mm 5.0-8.0 $$ GPP100541S 2.1 mm 3.0-5.0 $$ 690
Water Powered Proportioning Pumps MR569CW MR570CW MR572CW Specifications: Chemically Resistant Nylon - Fiberglass body All seals specifically designed to withstand carwash additives. Easily replaceable wear parts. Extra Lip Seal Piston Kit included with each unit Higher 120 PSI operating range. 2.9 PSI to 120 PSI Optional Tip Kit, p/n 57-11-1 for dilutions from 750:1 to 2000:1. Accurate dispensing Uses only 20% of pressure to drive the pump Low maintenance and easy to adjust No special model needed Hose barbs with swivel for easy installation Injection from 300:1 to 1:10 (.3% to 10%) Includes 7 ft. 3/8 inlet tubing with foot valve strainer Check Valve with Hastelloy spring 19 1/2 high, 7 wide All Hastelloy Springs Chemical Shut-off (Models 571,573, 575) Same unit different options MR14CW05 Chemical Tip Kit Options Part # PSI Ratio Percent Oz/Gal GPM Applications Price MR570CW 2.9-120 500:1 to 50:1.3% - 2%.38 to 2.5.09 to 11 Carwash cleaning agents & detergents $$ MR572CW 2.9-120 250:1 to 25:1.4% to 4%.51 to 5.1.09 to 11 Carwash cleaning agents & detergents $$ MR570CL 2.9-120 500:1 to 50:1.3% to 2%.38 to 2.5.09 to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ Chemical On/Off Option MR570CL All Hastelloy Springs All PVDF components 570PVDF Part # PSI Ratio Percent Oz/Gal GPM Applications Price MR571CW 2.9-120 500:1 to 50:1.3% - 2%.38 to 2.5.09 to 11 Carwash cleaning agents & detergents $$ MR573CW 2.9-120 250:1 to 25:1.4% to 4%.51 to 5.1.09 to 11 Carwash cleaning agents & detergents $$ MR571CL 2.9-120 500:1 to 50:1.3% to 2%.38 to 2.5.09 to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR572CL 2.9-120 250:1 to 25:1.4% to 4%.51 to 5.1.09 to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR573CL 2.9-120 250:1 to 25:1.4% to 4%.51 to 5.1.09 to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR1410A 2.9-120 100:1 to 10:1 1% to 10% 1.28 to 12.8.09-14 Carwash applications, hydrofloric acids, tire cleaners, chlorine $$ MR575CL 2.9-120 33:1 to 10:1 3% to 10% 3.8 to 12.8.09 to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR14CW05 2.9-120 100:1 to 20:1 1% to 5% 1.28 to 6.4.09-14 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR569CLONOFF 2.9-120 1000:1 to 100:1.1% to.9% 1.28 to 1.15.09 to 11 Carwash cleaning agents, detergents and rinse additives $$ Accessories Includes 4 Metering Tips, 8ft. 1/4 Vinyl Hose (not shown) and 1/4 x 3/8 barb adapter 50-41-1 Part # Description For Model Price MR573VE Chemical Piston Kit 2% 570CW, 571CW $$ MR575VE Chemical Check Valve Kit Viton - $$ MR578VE Chemical Piston Kit 4% 572CW, 573CW $$ MR57111 Tip Kit 570CW, 571CW, 570CL, 571CL $$ MR50411 200 Mesh Strainer (80 Micron) All Models $$ MR57K02005 Lip Seal & Piston Kit 2% 570CW, 571CW, 570CL, 571CL $$ MR57K04012 Lip Seal & Piston Kit 4% 572CW, 573CW, 572CL, 573CL $$ MR57K10013 Lip Seal & Piston Kit 10% 574CL, 575CL $$ MR57UFR Low Flow Booster - $$ MR50411 3/4 Female Strainer - $$ MR36073008002 Anti-Siphon Kit - $$ 691
Hydro Foamer HydroFoamers from Hydro Systems eliminate the time and hassle of manually mixing concentrates, which not only increases labor productivity, but also increases concentrate performance because the solutions are consistently mixed as directed by the manufacturer. Since concentrates are mixed only as they are applied, they are fresh and will perform at peak power, and waste is minimized. 12:1 to 128:1 Dilution Proven, reliable components Non-electric No installation required Compact, easy to store Enhanced safety Maximum cleaning product performance IN481 $$ Volumetric Proportioners SuperDos From the manufacturers of HydroMinder: Hydro Systems Company s water driven injectors deliver accurately diluted chemicals with best in class quality. Highly chemical resistant materials of construction standard on all units Up to 140 PSI pressure rating Patented inner mixing chamber Made in the USA Things to Consider When Choosing your Injector: Water Flow Rate: Knowing the flow rate of your water source is critical to selecting the best water driven injector. Water Line Pressure: Making sure the injector you choose is rated to operate with your facilities water line pressure is critical. Desired Injection Ratio or Percentage: Each Hydro volumetric model lists the range of chemical injection it is capable of supporting. Type of Chemical to be Injected: Hydro Systems volumetric injectors can handle a wide range of chemicals (aggressive, high viscosity, dissolved powders.) We can assist you in selecting the proper injector for your chemistry. MiniDos Model Part # Flow Rate Injection Range PSI Price MiniDos12-0.3% DM112638 0.03-12.0 GPM 1:4000-1:333 6-140 CALL MiniDos12-1% DM112630 0.03-12.0 GPM 1:500-1:100 6-140 $$ MinDos12-2.5% DM112632 0.03-12.0 GPM 1:200-1:40 6-140 $$ SuperDos20-0.3% DM113228R 0.04-20.0 GPM 1:4000-1:333 5-100 CALL SuperDos20-2.5% DM113209 0.04-20.0 GPM 1:500-1:40 5-100 CALL SuperDos45-0.3% DM113320R 0.04-45.0 GPM 1:4000-1:333 5-100 CALL SuperDos45-2.5% DM113212 0.04-45.0 GPM 1:500-1:40 5-100 CALL Twist II Clean Filters Part # Price Twist II Clean 3/4" (140 Micron) Twist II Clean 1" (140 Micron) DM017004 $$ DM017008 $$ 692
Chemical Proportioners The water-powered Dosatron provides accurate car wash chemical dispensing while cutting your cost-per-car, and the units automatically compensate for flow and pressure changes providing consistent, repeatable results. The new series offers: Metal free and simplified piston Viton seal and o-rings Polypropylene housings Easy-to-adjust ratio stem OPERATING PRINCIPLE Water Flow Blended Solution Mixing Chamber Externally Adjustable Ratios D14MZ-D Car Wash Series Part # Manu. Part # Flow D14MZ3000-D Super Concentrate Car Wash Series Injection Range D25RE1500-D PSI Price DOSD1402 D14MZ2VFDII 0.05 to 14 GPM 500:1-50:1 4.3 to 85 $$ Intake From Concentrate Container Self Serve Panel DOS0138 CALL DOSD1405 D14MZ5AFDII 0.05 to 14 GPM 200:1-20:1 4.3 to 85 $$ DOSD1410 D14MZ10AFDII 0.05 to 14 GPM 100:1-10:1 7 to 85 $$ DOSD1430 D14MZ3000VFDII 0.05 to 14 GPM 3000:1 to 333:1 4.3 to 85 $$ DOSD2515 D25RE1500VFDII 0.05 to 11 GPM 1500:1-500:1 4.3 to 85 $$ Seal Kits Part # Manu. Part# Description Price DOSK1000 PJDI116VF Seal Kit For DOSD1402 $$ DOSK1010 PJDI120HTAF Seal Kit For DOSD1405 $$ DOSK1020 PJDI122HTAF Seal Kit For DOSD1410 $$ DOSED251500 PJ118VF Seal Kit For DOSD2515 $$ DOSPJDI139VF PJDI0139VF Seal Kit for DOSD1430 $$ DOSED252 PJ093VF Seal Kit for D25RE2 $$ Dosa Lock Security Device Dosa Lock is an easy-to-install lock out device that protects unauthorized access to your injector and fits most Dosatron units. The Dosa Lock device includes: Dosa Lock, lock, and key. Replacement lock and key available. DOS1000 CALL 693