ED T8 Full Glass Tube Product Code Watts (W) Installation Instructions: Volts (V) Cap Colour Appearance Colour Temp (K) ED T8 full glass tube providing 320 light output. Energy saving with low power consumption. Includes ED starter for direct retrofit into existing single batten fittings. 40,000 hour life 15,000 switching cycles 4000K cool white colour Standard 2ft, 3ft, 4ft, 5ft or 6ft T8 lengths 2ft-5ft features internal diffused coating 6ft features external diffusing sleeve o mercury or hazardous materials o warping, no bending o discolouration of output over life of tube Single ended circuit for risk free installation ot suitable for dimming Initial umens (lm) Beam Angle Dimensions (mm) Energy Rating Order Qty Dia Single Carton FT29CW 9 165-240 G13 Cool White 4000 810 320 26 602 1 FT314CW 14 165-240 G13 Cool White 4000 1200 320 26 906 1 FT422CW 22 165-240 G13 Cool White 4000 2050 320 26 1212 1 FT524CW 24 165-240 G13 Cool White 4000 2500 320 26 1513 1 FT632CW 32 165-240 G13 Cool White 4000 3000 320 26 1776 1 Magnetic Ballasts: Remove old fluorescent starter and tube and insert ED glass tube and included ED starter. High Frequency Ballasts: Remove old fluorescent starter and bypass ballast by rewiring directly to AC, only to be carried out by a qualified electrician. Single Ended: Remove old fluorescent starter and bypass ballast by rewiring directly to lamp stamp end only; the pins are not polarity sensitive. Only to be carried out by a qualified electrician. Dia G13 Cap Crompton amps imited registered in England and Wales o. 05590551 Registered office and correspondence address: Unit 2, Marrtree Business Park, Bowling Back ane, Bradford BD4 8QE All images and specifications are for illustration purposes only and are subject to change without notice. E. & O. E. Crompton amps imited 2015
ED T8 Glass Tube Installation Manual 9W 2 ED T8 / 14W 3 ED T8 / 22W 4 ED T8 / 24W 5 ED T8 / 32W 6 ED T8 Warning: The ED tube must be installed when power is switched off The ED tube is designed for indoor use and dry place application - for any other application, please use in conjunction with a fixture meeting the appropriate IP requirements Installation - Magnetic Ballast Circuit We recommend to remove any parallel capacitor to achieve highest power factor CCG CCG S Fluorescent Starter ED Starter 2 Remove the fluorescent starter Fluorescent Starter 3 Remove the fluorescent tube 4 Insert the ED starter ED Starter 5 Insert the ED tube 6 Switch on the power ED Starter Installation - ew Installation / Electronic Ballast Circuit (ECG) & Series Circuit * Only to be carried out by Single Circuit Series Circuit qualified electrician 2 Remove the fluorescent tube 3 Rewire the circuit as per guidelines IVE to lamp stamp end only 4 Insert the 5 Stick warning label onto luminaire * B: Series circuits can sometimes be found in some modular CCG fittings Installation - Single Ended Circuit Only to be carried out by qualified electrician 2 Remove the fluorescent tube 3 Rewire the circuit as per guidelines to lamp stamp end of tube only. ote: The pins are not polarity sensitive 4 Insert the 5 Stick warning label onto luminaire Single Ended Circuit Diagrams are for information only - please refer to a qualified electrician If you have any uncertainty about the installation or usage of the tube, please consult Crompton amps on the details below Tel: +44 (0)845 612 8151 Fax: +44 (0)845 612 8171 Email: lamps@cromptonlamps.com Web: www.cromptonlamps.com
ED T8 Full Glass Tube on-dimmable 40,000 Hours Direct Retrofit into Existing Single Batten Fittings Simply replace included starter* 15,000 Switching Cycles 320 All Round ight Output Full glass tube Patented technology SMD ED Technology Cool White 4000K colour temperature Heat dissipating plate o mercury and hazardous substances o need for internal reflector Single-ended circuit for risk free installation Code Cap Wattage Voltage ength Colour Temp umen ife CRi Energy Rating MOQ FT29CW G13 9W 165V - 240V 2 / 602mm 4000K Cool White 810lm 40,000 hrs 80 1 FT314CW G13 14W 165V - 240V 3 / 906mm 4000K Cool White 1200lm 40,000 hrs 80 1 FT422CW G13 22W 165V - 240V 4 / 1212mm 4000K Cool White 2050lm 40,000 hrs 80 1 FT524CW G13 24W 165V - 240V 5 / 1513mm 4000K Cool White 2500lm 40,000 hrs 80 1 FT632CW G13 32W 165V - 240V 6 / 1813mm 4000K Cool White 3000lm 40,000 hrs 80 1 Crompton amps imited registered in England and Wales o. 05590551 Registered office and correspondence address: Unit 2, Marrtree Business Park, Bowling Back ane, Bradford BD4 8QE * High frequency ballast fixtures will need rewiring by qualified electrician. This offer cannot be used in conjunction with any other offer. All prices are subject to Crompton amps imited Terms & Conditions and include WEEE recycling charges where applicable. Prices shown exclude VAT. All images and specifications are for illustration purposes only and are subject to change without notice. E. & O. E. Crompton amps imited 2015. EDT8-0915
Had a bad experience with a thermal plastic ED tube? EW! Full Glass ED T8 Tube with 320 All Round ight Output Patented technology SMD ED Technology Cool White 4000K colour temperature Heat dissipating plate o mercury and hazardous substances o need for internal reflector Single-ended circuit for risk free installation Code Cap Wattage Voltage ength Colour Temp umen ife CRi Energy Rating MOQ FT29CW G13 9W 165V - 240V 2 / 602mm 4000K Cool White 810lm 40,000 hrs 80 1 FT314CW G13 14W 165V - 240V 3 / 906mm 4000K Cool White 1200lm 40,000 hrs 80 1 FT422CW G13 22W 165V - 240V 4 / 1212mm 4000K Cool White 2050lm 40,000 hrs 80 1 FT524CW G13 24W 165V - 240V 5 / 1513mm 4000K Cool White 2500lm 40,000 hrs 80 1 FT632CW G13 32W 165V - 240V 6 / 1813mm 4000K Cool White 3000lm 40,000 hrs 80 1 Crompton amps imited registered in England and Wales o. 05590551 Registered office and correspondence address: Unit 2, Marrtree Business Park, Bowling Back ane, Bradford BD4 8QE * High frequency ballast fixtures will need rewiring by qualified electrician. This offer cannot be used in conjunction with any other offer. All prices are subject to Crompton amps imited Terms & Conditions and include WEEE recycling charges where applicable. Prices shown exclude VAT. All images and specifications are for illustration purposes only and are subject to change without notice. E. & O. E. Crompton amps imited 2015. EDT8-Warping