A 934 C HD. Machine for Industrial Applications

Machine for Industrial Applications A 93 C HD litronic` High Rise Operating Weight: 100,300 10,300 lb Engine Output (SAE J139): 01 HP / 150 kw Engine Output (ISO 99): 0 HP / 150 kw

Technical Data Engine Rating per SAE J139 01 HP (150 kw) at 1,800 rpm Rating per ISO 99 0 HP (150 kw) at 1,800 rpm Model Liebherr D 93 L according to level IIIA / Tier 3 Type cylinder in-line Bore/Stroke.8/5.9 in Displacement 7 in 3 Engine operation -stroke diesel unit pump system turbo-charged and after-cooled reduced emissions Cooling water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements, automatic dust discharge Fuel tank 153 gal Standard sensor controlled engine idling Electrical system Voltage V Batteries x 170 Ah/1 V Starter V/6.6 kw Alternator three phase current 8 V/80 A Option Liebherr particle filter Hydraulic System Hydraulic pump for attachment and travel drive two Liebherr variable flow, swash plate pumps Max. flow x 65 gpm Max. pressure 5,076 psi Pump regulation electro-hydraulic with electronic engine speed sensing regulation, pressure compensation, flow compensation, automatic oil flow optimizer Hydraulic pump for swing drive reversible, variable flow, swash plate pump, closed-loop circuit Max. flow 39 gpm Max. pressure 5,511 psi Hydraulic tank 93 gal Hydraulic system 156 gal Hydraulic oil filter full flow filters in return line with inte grated fine filter area (5 µm) Hydraulic oil cooler compact cooler, consisting of a water cooler, sandwiched with hydraulic oil cooler, fuel cooler and after-cooler cores and hydrostatically driven fan MODE selection adjustment of machine performance and the hydraulics via a mode selector to match application ECO for especially economical and environ mentally friendly operation POWER for maximum digging power and heavy duty jobs LIFT for lifting FINE for precision work and lifting RPM adjustment stepless adjustment of engine output via the rpm at each selected mode Tool Control (Option) ten preadjustable pump flows and pres sures for add on tools Hydraulic Controls Power distribution via control valves in single block with integrated safety valves Flow summation to boom and stick Closed-loop circuit for uppercarriage swing drive Servo circuit Attachment and swing proportional via joystick levers Travel proportional via foot pedal Additional functions via foot pedals or joystick push buttons Swing Drive Drive Liebherr swash plate motor with integrated brake valves Transmission Liebherr compact planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed 0.5 rpm stepless Swing torque 61,955 lbf ft Holding brake wet multi-disc (spring applied, pressure released), pedal controlled positioning brake Operator s Cab Cab resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window Operator s seat fully adjustable, shockabsorbing suspen sion, adjustable to operator s weight and size, 6-way adjustable Liebherr seat Joysticks integrated into adjustable consoles Monitoring menu driven query of current operating conditions via the LCD display. Automatic monitoring, display, warning (acoustical and optical signal) and saving machine data, for example, engine overheating, low engine oil pressure or low hydraulic oil level Air conditioning standard air conditioning, combined cooler/ heater, additional dust filter in fresh air/recirculated Noise emission ISO 6396 L pa (inside cab) = 7 db(a) 000/1/EC L WA (surround noise) = 10 db(a) Undercarriage Drive Liebherr variable flow swashplate motor with automatic brake valves Transmission oversized two speed power shift trans mission with additional creeper speeds Travel speed 0 1.6 mph (creeper speed) 0 3.1 mph (cross country) 0 5.6 mph (creeper speed road) 0 11. mph (road travel) Axles 15,3 lb excavator axles; automatic or operator controlled front axle oscillation lock Service and holding brakes multiple wet discs Parking brake multiple wet discs (spring applied pressure released) Stabilization -point outriggers with suspended rocker arm supports Attachment Type high-strength steel plates at highly- stressed points for the toughest requirements. Complex and stable mountings of attachment and cylinders. Unrivalled strength, even at high loads Hydraulic cylinders Liebherr cylinders with special seal system. Shock absorbing Pivots sealed, low maintenance Lubrication Liebherr semi-automatic central lubrication system A 93 C HD Litronic High Rise

Dimensions E D A1 A W H C K Q X T V L U Z M T1 B1 B ft in A 10 1 A1 1 8 B 10 6 B1 17 3 C 17 D 10 7 E 10 7 H 1 1 K 9 1 L 10 6 M 5 3 Q 1 5 T1 7 T 5 U 0 1 Z 0 8 E = Tail radius Industrial-Type Gooseneck Boom 8 3 and Industrial Stick ft in 19 8 7 V ft in 5 1 6 W ft in 15 7 17 11 X ft in 0 6 0 10 Industrial-Type Straight Boom 8 3 and Industrial Stick ft in 19 8 7 V ft in 7 1 W ft in 1 1 15 1 X ft in 0 6 0 6 Industrial-Type Straight Boom 31 6 and Industrial Stick ft in 7 9 6 V ft in 7 1 W ft in 1 1 18 X ft in 3 10 3 6 Dimensions are with attachment over steering axle Tires 16.00-5 A 93 C HD Litronic High Rise 3

Industrial Attachment with Industrial-Type Gooseneck Boom 8 3 ft 55 50 5 0 35 30 5 0 15 10 5 0-5 -10-15 -0-5 m 18 17 16 15 1 13 1 11 10 9 8 7 6 5 3 1 0-1 - -3 - -5-6 -7-8 17 16 15 1 1 3 13 1 11 10 9 8 7 6 5 3 1 0 m Attachment Envelope Kinematic variant 3D 1 with industrial stick 19 8 with industrial stick 7 3 with industrial stick 19 8 and grapple model 70 C with industrial stick 7 and grapple model 70 C Operating Weight Operating weight includes basic machine A 93 C HD litronic` High Rise with point outriggers, hydraulic cab elevation, solid tires and industrial application with industrial-type gooseneck boom 8 3. with grapple model 70 C/1.05 yd 3 semi-closed tines industrial stick 19 8 industrial stick 7 Weight 101,00 lb 101,850 lb 55 50 5 0 35 30 5 0 15 10 5 0 ft VarioLiftPlus VarioLiftPlus: Variable boom mounting positions for optimized lift capacities with a different working range Hole C Hole D 3D 3D Hole 3 Hole 3C Version 3D Kinematic Variant 3D: Increased lift capacities below ground level and when working at large outreach Kinematic Variant 3C: Altered range curve with additional reach depth, e.g. for unloading from ships A 93 C HD Litronic High Rise

Lift Capacities with Industrial-Type Gooseneck Boom 8 3 (Kinematic Variant 3D) Industrial Stick 19 8 5 pt. outriggers down 0 pt. outriggers down 1,00* 1,00* 1,700* 1,700* 6 15,000* 15,000* 1,300* 1,300* 11,500* 11,500* 3 13,900* 13,900* 13,300* 13,300* 10,900* 10,900* 36 9 15,100* 15,100* 1,100* 1,100* 13,300* 13,300* 10,600* 10,600* 10,600* 10,600* 0 16,000* 16,000* 1,600* 1,600* 13,500* 13,500* 1,700* 1,700* 10,600* 10,600* 5 0,000* 0,000* 17,300* 17,300* 15,00* 15,00* 1,000* 1,000* 13,000* 13,000* 10,700* 10,700* 5,100* 5,100* 9,800* 9,800*,900*,900* 19,000* 19,000* 16,00* 16,00* 1,700* 1,700* 13,300* 13,300* 11,500* 11,500* 10,900* 10,900* 5 3 5,500* 5,500* 35,800* 35,800* 6,000* 6,000* 0,800* 0,800* 17,500* 17,500* 15,300* 15,300* 13,700* 13,700* 1,00* 1,00* 11,00* 11,00* 5 9,00*,00* 17,000* 17,000* 8,00* 8,00*,300*,300* 18,500* 18,500* 15,900* 15,900* 1,000* 1,000* 1,500* 1,500* 1,000* 1,000* 5 8 6,900* 6,900* 1,600* 1,600* 9,700* 9,700* 3,00* 3,00* 19,100* 19,100* 16,300* 16,300* 1,00* 1,00* 1,300* 1,300* 1,300* 1,300* 5 1 15,500* 15,500* 8,600* 8,600* 3,500* 3,500* 19,300* 19,300* 16,300* 16,300* 1,000* 1,000* 1,300* 1,300* 3 11 17,300* 17,300* 8,00* 8,00* 3,000* 3,000* 18,900* 18,900* 15,900* 15,900* 13,300* 13,300* 1,300* 1,300* 1 1,500* 1,500* 17,700* 17,700* 15,00* 15,00* 33 9 Industrial Stick 7 5 pt. outriggers down 0 pt. outriggers down 10,500* 10,500* 7 3 1,00* 1,00* 9,300* 9,300* 33 11 11,700* 11,700* 8,600* 8,600* 38 9 11,500* 11,500* 10,900* 10,900* 8,300* 8,300* 6 1,000* 1,000* 11,600* 11,600* 11,100* 11,100* 8,500* 8,500* 8,100* 8,100* 5 1,600* 1,600* 11,900* 11,900* 11,300* 11,300* 10,800* 10,800* 8,100* 8,100* 7 6 1,700* 1,700* 13,500* 13,500* 1,500* 1,500* 11,700* 11,700* 11,000* 11,000* 8,100* 8,100* 9 19,000* 19,000* 16,00* 16,00* 1,600* 1,600* 13,00* 13,00* 1,100* 1,100* 11,300* 11,300* 8,300* 8,300* 50,800*,800* 9,300* 9,300*,300*,300* 18,00* 18,00* 15,800* 15,800* 1,000* 1,000* 1,600* 1,600* 11,600* 11,600* 9,300* 9,300* 8,500* 8,500* 50 5 10,00* 10,00* 35,100* 35,100* 5,500* 5,500* 0,00* 0,00* 17,000* 17,000* 1,800* 1,800* 13,100* 13,100* 11,800* 11,800* 9,600* 9,600* 8,900* 8,900* 50 5 8,00* 8,00* 19,600* 19,600* 7,800* 7,800* 1,700* 1,700* 18,000* 18,000* 15,00* 15,00* 13,500* 13,500* 1,000* 1,000* 9,00* 9,00* 9 10 9,500* 9,500* 16,500* 16,500* 9,000* 9,000*,700*,700* 18,600* 18,600* 15,800* 15,800* 13,700* 13,700* 1,000* 1,000* 10,100* 10,100* 8 9 11,000* 11,000* 16,600* 16,600* 9,100* 9,100*,900*,900* 18,800* 18,800* 15,900* 15,900* 13,600* 13,600* 11,700* 11,700* 10,800* 10,800* 7 1 17,500* 17,500* 8,100* 8,100*,00*,00* 18,00* 18,00* 15,00* 15,00* 13,000* 13,000* 11,000* 11,000* 0,900* 0,900* 17,00* 17,00* 1,800* 1,800* 3 1 Height Can be slewed through 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 15 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. A 93 C HD Litronic High Rise 5

Industrial Attachment with Industrial-Type Straight Boom 8 3 ft 65 60 55 50 5 0 35 30 5 0 15 10 5 0 m 0 18 16 1 1 10 8 6 0 Attachment Envelope Kinematic variants A/3B 1 with industrial stick 19 8 with industrial stick 7 3 with industrial stick 19 8 and clamshell model 0 B with industrial stick 7 and clamshell model 0 B Operating Weight Operating weight includes basic machine A 93 C HD litronic` High Rise with point outriggers, hydraulic cab elevation, solid tires and industrial application with industrial-type straight boom 8 3. with clamshell model 0 B/1.96 yd 3 shells for loose material industrial stick 19 8 industrial stick 7 Weight 100,300 lb 100,750 lb -5-10 -15-0 - - -6 16 1 1 1 10 3 8 6 0 m 55 50 5 0 35 30 5 0 15 10 5 0 ft VarioLiftPlus VarioLiftPlus: Variable boom mounting positions for optimized lift capacities with the same working range with a different working range Hole A A Hole B A Hole 3 3B Hole 3A Version A Kinematic Variant A: Increased lift capacities above ground level Kinematic Variant 3B: Increased lift capacities below ground level and when working at large outreach Kinematic Variant 3A: Altered range curve with additional reach depth, e.g. for unloading from ships 6 A 93 C HD Litronic High Rise

Lift Capacities with Industrial-Type Straight Boom 8 3 (Kinematic Variant A) Industrial Stick 19 8 5 pt. outriggers down 0 pt. outriggers down 1,500* 1,500* 17,100* 17,100* 19 1 1,000* 1,000* 17,300* 17,300* 13,700* 13,700* 7 9 0,300* 0,300* 17,100* 17,100* 1,00* 1,00* 33 7 0,100* 0,100* 17,700* 17,700* 15,700* 15,700* 11,00* 11,00* 37 10 3,700* 3,700* 0,00* 0,00* 17,700* 17,700* 15,700* 15,700* 13,00* 13,00* 10,900* 10,900* 1 1,600*,600* 0,700* 0,700* 17,900* 17,900* 15,700* 15,700* 13,800* 13,800* 10,700* 10,700* 3 5 7,700* 7,700* 6,000* 6,000* 1,500* 1,500* 18,300* 18,300* 15,900* 15,900* 13,800* 13,800* 11,100* 11,100* 10,600* 10,600* 5 5,600* 5,600* 36,00* 36,00* 7,500* 7,500*,00*,00* 18,600* 18,600* 15,900* 15,900* 13,700* 13,700* 11,500* 11,500* 10,600* 10,600* 6 3 38,900* 38,900* 8,700* 8,700*,700*,700* 18,800* 18,800* 15,800* 15,800* 13,00* 13,00* 11,100* 11,100* 9,900* 9,900* 6 10 13,00* 13,00* 8,600* 8,600*,600*,600* 18,500* 18,500* 15,500* 15,500* 1,900* 1,900* 10,300* 10,300* 9,000* 9,000* 6 10 11,00* 11,00* 6,900* 6,900* 1,600* 1,600* 17,600* 17,600* 1,600* 1,600* 11,900* 11,900* 9,000* 9,000* 7,900* 7,900* 6 13,100* 13,100* 3,600* 3,600* 19,500* 19,500* 16,000* 16,000* 13,100* 13,100* 10,00* 10,00* 7,900* 7,900* 3 10 19,000* 19,000* 16,00* 16,00* 13,500* 13,500* 10,800* 10,800* 9,300* 9,300* 37 9 Industrial Stick 7 5 pt. outriggers down 0 pt. outriggers down 1,600* 1,600* 19 9 15,100* 15,100* 11,300* 11,300* 9 1 17,000* 17,000* 1,700* 1,700* 10,500* 10,500* 9,900* 9,900* 35 5 16,00* 16,00* 1,100* 1,100* 9,00* 9,00* 9,100* 9,100* 0 1 16,300* 16,300* 1,700* 1,700* 1,900* 1,900* 8,600* 8,600* 3 9 16,00* 16,00* 1,700* 1,700* 13,300* 13,300* 10,600* 10,600* 8,300* 8,300* 6 6 18,900* 18,900* 16,700* 16,700* 1,900* 1,900* 13,300* 13,300* 11,800* 11,800* 8,100* 8,100* 8 8 19,800* 19,800* 17,00* 17,00* 15,100* 15,100* 13,00* 13,00* 11,800* 11,800* 8,00* 8,00* 8,100* 8,100* 50 19,500* 19,500*,300*,300* 0,800* 0,800* 17,700* 17,700* 15,300* 15,300* 13,00* 13,00* 11,700* 11,700* 9,900* 9,900* 8,100* 8,100* 51 5,100* 5,100* 35,900* 35,900* 7,000* 7,000* 1,700* 1,700* 18,100* 18,100* 15,500* 15,500* 13,00* 13,00* 11,500* 11,500* 9,500* 9,500* 8,00* 8,00* 51 8 5,900* 5,900* 38,00* 38,00* 8,00* 8,00*,300*,300* 18,300* 18,300* 15,500* 15,500* 13,00* 13,00* 11,100* 11,100* 8,900* 8,900* 7,900* 7,900* 51 8 5,100* 5,100* 16,100* 16,100* 8,000* 8,000*,100*,100* 18,100* 18,100* 15,100* 15,100* 1,700* 1,700* 10,500* 10,500* 8,000* 8,000* 7,100* 7,100* 51 3 6,800* 6,800* 1,000* 1,000* 6,300* 6,300* 1,000* 1,000* 17,100* 17,100* 1,00* 1,00* 11,700* 11,700* 9,00* 9,00* 6,00* 6,00* 9 10 1,800* 1,800* 3,00* 3,00* 18,900* 18,900* 15,500* 15,500* 1,700* 1,700* 10,300* 10,300* 7,700* 7,700* 7,100* 7,100* 6 18,700* 18,700* 15,600* 15,600* 1,900* 1,900* 10,00* 10,00* 8,600* 8,600* 38 9 Height Can be slewed through 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 15 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. A 93 C HD Litronic High Rise 7

Lift Capacities with Industrial-Type Straight Boom 8 3 (Kinematic Variant 3B) Industrial Stick 19 8 5 pt. outriggers down 0 pt. outriggers down,00*,00* 17,00* 17,00* 16,600* 16,600* 0 7 19,100* 19,100* 17,00* 17,00* 13,500* 13,500* 8 10 16,00* 16,00* 15,300* 15,300* 1,100* 1,100* 3 5 16,00* 16,00* 15,000* 15,000* 1,100* 1,100* 11,300* 11,300* 38 7 18,300* 18,300* 16,500* 16,500* 15,100* 15,100* 1,100* 1,100* 13,300* 13,300* 10,900* 10,900* 1 8 19,600* 19,600* 17,300* 17,300* 15,600* 15,600* 1,300* 1,300* 13,300* 13,300* 10,600* 10,600* 6,700* 6,700* 1,700* 1,700* 18,600* 18,600* 16,00* 16,00* 1,800* 1,800* 13,500* 13,500* 1,00* 1,00* 10,600* 10,600* 5 8 8,500* 8,500* 3,000* 3,000*,500*,500* 0,100* 0,100* 17,300* 17,300* 15,300* 15,300* 13,800* 13,800* 1,500* 1,500* 10,700* 10,700* 6 9 8,500* 8,500* 7,00* 7,00* 1,700* 1,700* 18,00* 18,00* 15,900* 15,900* 1,100* 1,100* 1,600* 1,600* 10,900* 10,900* 7 3 11,00* 11,00* 9,300* 9,300* 3,000* 3,000* 19,000* 19,000* 16,300* 16,300* 1,00* 1,00* 1,500* 1,500* 11,300* 11,300* 7 10,700* 10,700* 9,100* 9,100* 3,600* 3,600* 19,00* 19,00* 16,500* 16,500* 1,00* 1,00* 1,100* 1,100* 11,300* 11,300* 6 7 1,700* 1,700* 5,800* 5,800* 3,500* 3,500* 19,300* 19,300* 16,300* 16,300* 13,800* 13,800* 1,000* 1,000* 3 9,00*,00* 18,500* 18,500* 15,500* 15,500* 1,300* 1,300* 37 1 Industrial Stick 7 5 pt. outriggers down 0 pt. outriggers down 15,00* 15,00* 1,000* 1,000* 1 15,600* 15,600* 11,00* 11,00* 11,100* 11,100* 30 3 1,500* 1,500* 13,700* 13,700* 11,500* 11,500* 9,800* 9,800* 36 13,00* 13,00* 1,600* 1,600* 10,300* 10,300* 9,000* 9,000* 0 11 13,000* 13,000* 1,00* 1,00* 11,900* 11,900* 8,600* 8,600* 5 1,000* 1,000* 13,00* 13,00* 1,500* 1,500* 11,800* 11,800* 11,300* 11,300* 8,300* 8,300* 7 1,800* 1,800* 13,700* 13,700* 1,800* 1,800* 1,000* 1,000* 11,300* 11,300* 8,100* 8,100* 9 18,100* 18,100* 16,100* 16,100* 1,500* 1,500* 13,300* 13,300* 1,300* 1,300* 11,500* 11,500* 9,00* 9,00* 8,100* 8,100* 50 8 19,900* 19,900* 0,800* 0,800* 17,700* 17,700* 15,600* 15,600* 1,000* 1,000* 1,700* 1,700* 11,700* 11,700* 10,800* 10,800* 8,100* 8,100* 51 7 8,00* 8,00* 31,500* 31,500* 3,900* 3,900* 19,500* 19,500* 16,700* 16,700* 1,700* 1,700* 13,100* 13,100* 11,900* 11,900* 10,800* 10,800* 8,00* 8,00* 5 1,700*,700* 30,500* 30,500* 6,700* 6,700* 1,00* 1,00* 17,700* 17,700* 15,300* 15,300* 13,500* 13,500* 1,100* 1,100* 10,800* 10,800* 8,500* 8,500* 5,800*,800* 1,00* 1,00* 8,700* 8,700*,500*,500* 18,500* 18,500* 15,800* 15,800* 13,800* 13,800* 1,100* 1,100* 10,500* 10,500* 8,800* 8,800* 51 6 6,700* 6,700* 13,00* 13,00* 9,00* 9,00* 3,100* 3,100* 18,900* 18,900* 16,000* 16,000* 13,800* 13,800* 11,900* 11,900* 10,000* 10,000* 9 11 1,00* 1,00* 6,900* 6,900*,900*,900* 18,800* 18,800* 15,800* 15,800* 13,00* 13,00* 11,300* 11,300* 11,000* 11,000* 5 9 1,800* 1,800* 18,000* 18,000* 15,000* 15,000* 13,500* 13,500* 37 10 Height Can be slewed through 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 15 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. 8 A 93 C HD Litronic High Rise

Industrial Attachment with Industrial-Type Straight Boom 31 6 ft 70 65 60 55 50 5 m 0 18 16 1 Attachment Envelope Kinematic variants A/3B 1 with industrial stick 7 with industrial stick 9 6 3 with industrial stick 7 and grapple model 65 with industrial stick 9 6 and grapple model 65 0 35 30 5 0 15 10 5 1 10 8 6 Operating Weight Operating weight includes basic machine A 93 C HD litronic` High Rise with point outriggers, hydraulic cab elevation, solid tires and industrial application with industrial-type straight boom 31 6. with grapple model 65/0.78 yd 3 semi-closed tines Weight industrial stick 7 101,650 lb industrial stick 9 6 10,300 lb 0 0-5 -10-15 -0-5 - - -6-8 0 18 16 1 1 3 1 10 8 6 0 m 65 60 55 50 5 0 35 30 5 0 15 10 5 0 ft VarioLiftPlus VarioLiftPlus: Variable boom mounting positions for optimized lift capacities with the same working range with a different working range Hole A A Hole B A Hole 3 3B Hole 3A Version A Kinematic Variant A: Increased lift capacities above ground level Kinematic Variant 3B: Increased lift capacities below ground level and when working at large outreach Kinematic Variant 3A: Altered range curve with additional reach depth, e.g. for unloading from ships A 93 C HD Litronic High Rise 9

Lift Capacities with Industrial-Type Straight Boom 31 6 (Kinematic Variant A) Industrial Stick 7 5 pt. outriggers down 0 pt. outriggers down 17,00* 17,00* 15 1,700* 17,00* 1,00* 1,00* 1,00* 1,00* 7 1 16,600* 16,600* 1,300* 1,300* 10,00* 10,00* 3 6 16,00* 16,00* 13,900* 13,900* 9,00* 9,00* 0 16,000* 16,000* 1,00* 1,00* 1,800* 1,800* 8,800* 8,800* 16,000* 16,000* 1,00* 1,00* 1,700* 1,700* 11,00* 11,00* 8,00* 8,00* 7 6 18,600* 18,600* 16,00* 16,00* 1,300* 1,300* 1,700* 1,700* 11,300* 11,300* 8,300* 8,300* 8,00* 8,00* 50 1 19,00* 19,00* 16,500* 16,500* 1,500* 1,500* 1,800* 1,800* 11,300* 11,300* 9,900* 9,900* 8,100* 8,100* 5 1 1,800* 1,800* 19,900* 19,900* 16,900* 16,900* 1,700* 1,700* 1,800* 1,800* 11,300* 11,300* 9,800* 9,800* 8,100* 8,100* 53 6 19,600* 19,600* 8,00* 8,00* 5,700* 5,700* 0,700* 0,700* 17,300* 17,300* 1,800* 1,800* 1,900* 1,900* 11,00* 11,00* 9,600* 9,600* 8,000* 8,000* 5 5 36,00* 36,00* 6,900* 6,900* 1,300* 1,300* 17,600* 17,600* 1,900* 1,900* 1,800* 1,800* 11,000* 11,000* 9,00* 9,00* 7,300* 7,300* 5 11 10,800* 10,800* 7,100* 7,100* 1,300* 1,300* 17,500* 17,500* 1,700* 1,700* 1,500* 1,500* 10,700* 10,700* 8,900* 8,900* 6,700* 6,700* 5 11,300*,300* 8,00* 8,00* 3,300* 3,300* 0,700* 0,700* 17,000* 17,000* 1,00* 1,00* 1,000* 1,000* 10,100* 10,100* 8,00* 8,00* 5,900* 5,900* 5 5 8,900* 8,900* 18,600* 18,600* 19,00* 19,00* 15,900* 15,900* 13,300* 13,300* 11,100* 11,100* 9,100* 9,100* 7,100* 7,100* 5,00* 5,00* 53 1 10,500* 10,500* 18,300* 18,300* 16,900* 16,900* 1,100* 1,100* 11,800* 11,800* 9,800* 9,800* 7,800* 7,800* 5,900* 5,900* 9 3 13,700* 13,700* 11,700* 11,700* 9,700* 9,700* 7,900* 7,900* 7,100* 7,100* Industrial Stick 9 6 5 pt. outriggers down 0 pt. outriggers down 1,700* 1,700* 10,600* 10,600* 8 1,600* 1,600* 9,700* 9,700* 8,800* 8,800* 35 11 13,800* 13,800* 1,00* 1,00* 9,500* 9,500* 7,900* 7,900* 1 9 13,00* 13,00* 11,700* 11,700* 8,700* 8,700* 7,300* 7,300* 6 13,00* 13,00* 1,000* 1,000* 10,900* 10,900* 6,900* 6,900* 6,900* 6,900* 50 13,00* 13,00* 1,000* 1,000* 10,800* 10,800* 9,600* 9,600* 6,600* 6,600* 53 15,000* 15,000* 13,00* 13,00* 1,000* 1,000* 10,800* 10,800* 9,700* 9,700* 6,900* 6,900* 6,500* 6,500* 55 15,300* 15,300* 13,600* 13,600* 1,100* 1,100* 10,900* 10,900* 9,700* 9,700* 8,500* 8,500* 6,00* 6,00* 57 1 16,300* 16,300* 15,800* 15,800* 13,900* 13,900* 1,300* 1,300* 10,900* 10,900* 9,700* 9,700* 8,00* 8,00* 6,00* 6,00* 58 5 16,500* 16,500* 19,300* 19,300* 16,00* 16,00* 1,00* 1,00* 1,00* 1,00* 10,900* 10,900* 9,600* 9,600* 8,300* 8,300* 6,00* 6,00* 59 3 6,00* 6,00*,00*,00* 5,00* 5,00* 0,00* 0,00* 16,900* 16,900* 1,00* 1,00* 1,500* 1,500* 10,900* 10,900* 9,500* 9,500* 8,100* 8,100* 6,00* 6,00* 59 9 11,500* 11,500* 35,800* 35,800* 6,00* 6,00* 0,800* 0,800* 17,100* 17,100* 1,500* 1,500* 1,00* 1,00* 10,700* 10,700* 9,00* 9,00* 7,700* 7,700* 5,800* 5,800* 59 9 3,500* 3,500* 1,900* 1,900* 6,500* 6,500* 0,800* 0,800* 17,000* 17,000* 1,300* 1,300* 1,100* 1,100* 10,00* 10,00* 8,800* 8,800* 7,100* 7,100* 5,00* 5,00* 59,500*,500* 10,100* 10,100*,700*,700* 0,100* 0,100* 16,00* 16,00* 13,700* 13,700* 11,600* 11,600* 9,800* 9,800* 8,100* 8,100* 6,300* 6,300*,500*,500* 58 6 6,100* 6,100* 10,00* 10,00* 19,800* 19,800* 18,600* 18,600* 15,300* 15,300* 1,800* 1,800* 10,700* 10,700* 8,900* 8,900* 7,100* 7,100* 5,000* 5,000*,600*,600* 55 9 11,500* 11,500* 19,100* 19,100* 16,300* 16,300* 13,500* 13,500* 11,300* 11,300* 9,300* 9,300* 7,500* 7,500* 5,600* 5,600* 5,00* 5,00* 51 1 13,100* 13,100* 11,100* 11,100* 9,00* 9,00* 7,00* 7,00* 6,00* 6,00* 10 Height Can be slewed through 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 15 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. 10 A 93 C HD Litronic High Rise

Lift Capacities with Industrial-Type Straight Boom 31 6 (Kinematic Variant 3B) Industrial Stick 7 18,100* 18,100* 16,300* 16,300* 17 17,600* 17,600* 1,800* 1,800* 11,900* 11,900* 8 5 1,700* 1,700* 13,500* 13,500* 10,900* 10,900* 10,300* 10,300* 35 6 1,000* 1,000* 1,900* 1,900* 1,100* 1,100* 10,00* 10,00* 9,300* 9,300* 0 10 1,700* 1,700* 11,800* 11,800* 11,00* 11,00* 8,800* 8,800* 11 13,900* 13,900* 1,700* 1,700* 11,800* 11,800* 11,100* 11,100* 10,500* 10,500* 8,00* 8,00* 8 1,00* 1,00* 13,100* 13,100* 1,000* 1,000* 11,00* 11,00* 10,500* 10,500* 9,300* 9,300* 8,00* 8,00* 50 8 15,00* 15,00* 13,600* 13,600* 1,00* 1,00* 11,00* 11,00* 10,600* 10,600* 9,900* 9,900* 8,100* 8,100* 5 7 19,00* 19,00* 16,500* 16,500* 1,00* 1,00* 1,900* 1,900* 11,700* 11,700* 10,800* 10,800* 10,000* 10,000* 8,100* 8,100* 5,900*,900* 8,500* 8,500* 1,900* 1,900* 18,000* 18,000* 15,00* 15,00* 13,500* 13,500* 1,100* 1,100* 11,000* 11,000* 10,100* 10,100* 8,100* 8,100* 5 10 33,500* 33,500*,500*,500* 19,500* 19,500* 16,300* 16,300* 1,100* 1,100* 1,500* 1,500* 11,00* 11,00* 10,00* 10,00* 8,900* 8,900* 8,300* 8,300* 55 3 9,100* 9,100* 6,600* 6,600* 0,800* 0,800* 17,00* 17,00* 1,700* 1,700* 1,800* 1,800* 11,00* 11,00* 10,00* 10,00* 8,900* 8,900* 8,500* 8,500* 55 3 5 pt. outriggers down,00*,00* 7,600* 7,600* 0,700* 0,700* 1,600* 1,600* 17,700* 17,700* 15,000* 15,000* 13,000* 13,000* 11,00* 11,00* 10,100* 10,100* 8,600* 8,600* 5 9 0 pt. outriggers down 8,600* 8,600* 17,00* 17,00* 1,900* 1,900* 17,900* 17,900* 15,100* 15,100* 13,000* 13,000* 11,300* 11,300* 9,800* 9,800* 8,700* 8,700* 53 17,600* 17,600* 1,00* 1,00* 17,600* 17,600* 1,900* 1,900* 1,700* 1,700* 10,900* 10,900* 9,500* 9,500* 9 1 0,00* 0,00* 16,800* 16,800* 1,100* 1,100* 1,000* 1,000* 11,600* 11,600* 1 1 Industrial Stick 9 6 1,600* 1,600* 17 3 13,00* 13,00* 10,300* 10,300* 9 1,00* 1,00* 10,300* 10,300* 8,700* 8,700* 37 11,600* 11,600* 11,000* 11,000* 10,100* 10,100* 7,800* 7,800* 8 11,00* 11,00* 10,600* 10,600* 10,100* 10,100* 9,300* 9,300* 7,00* 7,00* 7 10,00* 10,00* 9,900* 9,900* 9,500* 9,500* 7,700* 7,700* 6,900* 6,900* 50 9 11,100* 11,100* 10,00* 10,00* 9,900* 9,900* 9,00* 9,00* 9,000* 9,000* 6,600* 6,600* 53 7 11,00* 11,00* 10,700* 10,700* 10,000* 10,000* 9,500* 9,500* 9,000* 9,000* 7,600* 7,600* 6,500* 6,500* 55 11 1,000* 1,000* 11,100* 11,100* 10,300* 10,300* 9,600* 9,600* 9,000* 9,000* 8,500* 8,500* 6,00* 6,00* 57 8 1,00* 1,00* 1,800* 1,800* 11,600* 11,600* 10,600* 10,600* 9,900* 9,900* 9,00* 9,00* 8,600* 8,600* 6,00* 6,00* 58 11 16,700* 16,700* 15,700* 15,700* 13,700* 13,700* 1,300* 1,300* 11,100* 11,100* 10,100* 10,100* 9,300* 9,300* 8,600* 8,600* 6,00* 6,00* 59 9 5,100* 5,100* 1,300* 1,300* 17,00* 17,00* 1,800* 1,800* 13,000* 13,000* 11,500* 11,500* 10,00* 10,00* 9,500* 9,500* 8,700* 8,700* 6,700* 6,700* 6,500* 6,500* 60 1 8,600* 8,600* 33,000* 33,000*,000*,000* 19,000* 19,000* 15,800* 15,800* 13,600* 13,600* 1,000* 1,000* 10,700* 10,700* 9,700* 9,700* 8,700* 8,700* 6,800* 6,800* 6,700* 6,700* 60 1 5 pt. outriggers down 3,00* 3,00* 11,300* 11,300* 6,000* 6,000* 0,300* 0,300* 16,700* 16,700* 1,00* 1,00* 1,300* 1,300* 10,900* 10,900* 9,800* 9,800* 8,700* 8,700* 6,900* 6,900* 59 7 0 pt. outriggers down,00*,00* 9,500* 9,500*,00*,00* 1,000* 1,000* 17,00* 17,00* 1,500* 1,500* 1,600* 1,600* 11,000* 11,000* 9,700* 9,700* 8,500* 8,500* 7,00* 7,00* 58 8 6,100* 6,100* 10,100* 10,100* 18,700* 18,700* 1,00* 1,00* 17,00* 17,00* 1,600* 1,600* 1,600* 1,600* 10,900* 10,900* 9,500* 9,500* 8,000* 8,000* 7,800* 7,800* 55 8 11,300* 11,300* 18,00* 18,00* 0,800* 0,800* 17,100* 17,100* 1,300* 1,300* 1,300* 1,300* 10,500* 10,500* 8,900* 8,900* 8,700* 8,700* 50 10 19,600* 19,600* 16,00* 16,00* 13,600* 13,600* 11,500* 11,500* 10,900* 10,900* 1 9 Height Can be slewed through 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in pounds (lb) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 15 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. A 93 C HD Litronic High Rise 11

Choice of Cab Elevation and Cab Protection C B C1 B1 D D1 E Hydraulic Cab Elevation (Parallelogram) + Intermediate Piece 1 B1 15 5 B 6 7 C1 17 C 8 3 D1 7 10 D 7 10 E 17 The parallelogram cab raiser allows the operator to choose his field of view between dimensions B1 and B. For a transport height lower than C1 the shell of the cab can be removed. The overall height is then E. As cab protection a front window screen can be installed. Grille above Grilles in front 1 A 93 C HD Litronic High Rise

Variety of Tools Shells for loose material with Shells for Loose Material Clamshell Model 0 B cutting edge (without teeth) Cutting width of shells ft in 3 3 3 11 5 3 Capacity yd 3 1.70 1.96.6 For loose material, specific weight up to lb/yd 3,58,58,58 Weight lb,987 3,10 3,17 Multiple Tine Grapples open tines semi-closed tines closed tines Grapple Model 6 Capacity yd 3 0.5 0.78 0.5 0.78 0.5 0.78 ( tines) Weight lb 1,863,91,36,93,337 3,351 Grapple Model 65 Capacity yd 3 0.5 0.78 0.5 0.78 0.5 0.78 (5 tines) Weight lb,535,71,833 3,10,91 3,351 Grapple Model 69 Capacity yd 3 1.05 1. 1.05 1. 1.05 1. ( tines) Weight lb,965 3,075 3,38 3,616,189,5 Grapple Model 70 C Capacity yd 3 1.05 1. 1.05 1. 1.05 1. (5 tines) Weight lb 3,7 3,505 3,759,101,99,398 Crane Hook with Suspension Max. load lb 7,558 Height with suspension ft in 3 1 Weight lb 1 Magnet Devices/Lifting Magnets Generator kw 13 0 Electromagnets with Suspension Power kw 8.5 10 Dia of magnet ft in 3 7 Height with suspension ft in 3 7 3 7 Weight lb,976,03 A 93 C HD Litronic High Rise 13

Equipment Undercarriage Two circuit travel brake with accumulator Travel motor protection + Outrigger cylinder rod guards + Creeper speed electrically switchable from cab New tires Service free parking brake Independent outrigger control Choice of tires + Auto check valve directly on each stabilizer cylinder Proportional power steering Customized colors + Two lockable storage boxes Two-speed power shift transmission Uppercarriage Electric fuel tank filler pump + Maintenance-free swing brake lock Handrails, non slip surfaces Main switch for electric circuit Maintenance-free HD-batteries Engine hood with lift assistance Pedal controlled positioning swing brake Reverse travel warning system + Rear area monitoring (country-dependent Standard or Option) /+ Sound insulation Customized colors + Lockable tool box Tool kit Hydraulics = Standard, + = Option Operator s Cab Storage tray Displays for engine operating condition Mechanical hour meters, readable from outside the cab Roof hatch 6-way adjustable seat Air suspension seat with heating and head-rest + Seat and consoles independently adjustable Extinguisher + Removable customized foot mat Dome light Hydraulic cab elevation + Rigid cab elevation + Cab heater with defroster Coat hook Air conditioning Electric cooler + Steering wheel adjustable Bullet proof window (fixed installation can not be opened) + Stereo radio + Preparation for radio installation + Rain visor over front window opening Beacon + Tinted windows Door with sliding window Optical warning if outriggers are not fully retracted + Auxiliary heating + Sun shade + Sun roller blind Electronic theft protection + Wiper/washer Cigarette lighter and ashtray Additional flood lights + Attachment Hydraulic tank shut-off valve Extra hydr. control for hydr. swivel + Pressure compensation Flood lights Hook up for pressure checks Hydr. lines for clam operation in sticks Pressure storage for controlled lowering of attachments with engine turned off Industrial-type gooseneck sticks with remote hydraulic pin puller Sealed pivots + Filter with partial micro filtration (5 µm) Safety lift hook + Electronic pump regulation Liebherr line of clams + Stepless mode system (ECO) Liebherr semi-automatic central lubrication system Flow compensation Liebherr fully-automatic central lubrication system + Four mixed modes, can also be adjusted LIKUFIX + Full flow micro filtration + Safety check valves on hoist cylinder Bio degradable hydraulic oil + Safety check valves on stick cylinder Tool Control + Hose quick connection Additional hydraulic circuits + Hydraulic or manual quick change tool adapter + Customized colors + Special buckets and tools + Overload warning device + Engine Two way valves for bucket/clam use + Turbo charger Locking of connections for clam operation + After-cooled Cylinders with shock absorber Sensor controlled engine idling Liebherr particle filter + Unit pump system Air filter with pre-cleaner main- and safety element Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr to retain warranty. Printed in Germany by Typodruck RG-BK-RP LHB/VF 1108096-0.5-01.11_enUS All illustrations and data may differ from standard equipment. Subject to change without notice. Liebherr Construction Equipment Co. 100 Chestnut Avenue, Newport News, VA 3607, USA +1 (757) 5 551, Fax +1 (757) 98 8701 www.liebherr.us, E-Mail: info.lce@liebherr.com