Castors run smoothly round the clock Industrial Castors The World in Motion.
Castors run smoothly round the clock Industrial Castors Tente stands for innovative and high-quality products around the clock. High quality standards during the development process and the use of sophisticated production technologies during manufacture have made us the market leader. In our company, which is certified to DIN/ISO 9001, all castors are manufactured and tested in conformity with standards EN 12526 to EN 12533. Have you ever considered what enormous distances each single castor covers over many years in use? And the repeated impact due to door sills and unevenness which the fastenings and swivel heads have to endure? Not to mention the continuous demands made on wheel bearings due to dust or moisture? You re looking for reliable allies who will do their job unfailingly under the most gruelling conditions? Then TENTE industrial castors are the right ones for you. Just let us know your needs and we will roll out a solution for you. TENTE quality and service you can always count on us. Robust The high quality of the materials used and the high-grade blue passivated (chromium VI free) surface finish make for an extremely long service life. Tough Their robust design enables industrial castors of the 3470 series to bear loads of up to 400 kg per castor. All load capacities are tested to EN 12532 dynamic. Stable Transport equipment is not just for moving - it s often just as important for it to stand securely. That s why there are castors available with different locking functions. Total lock: Both the swivel action and wheel running are blocked at the same time. Directional lock: Locks the swivel action of the housing. This ensures that the wheel will travel smoothly in a straight line. 2
Light industrial castors Series 3370 Series 3370 blue passivated, wheel axle with nut Available as: 3370 Swivel castor 3377 Swivel castor with total lock The swivel castors are compatible with our fixed castor range 3478. Fittings: Plate Wheel-Ø 080, 100 and 125 mm = P62 Plate dimension: 105 mm x 85 mm Wheel-Ø 160 and 200 mm = P63 Plate dimension: 137 mm x 105 mm Räder: DVR Wheel rims: pressed steel, zinc-chromatised Tread: rubber, black, PVR Wheel centre: Polypropylene Tread: solid rubber, black without threadguards, Wheel sizes: 080 mm bis 200 mm Ø PJR Wheel centre: Polypropylene Tread: TENTEprene (thermoplastic rubber) without threadguards, POR Wheel: Polypropylene black without threadguards, Wheel sizes: 080 mm to 125 mm Ø Load capacity: up to 200 kg per castor 3
Industrial castors Series 3470 The development of this castor series has resulted in a standard range that is universally usable for all types of transport equipment. By using different wheels, you will find the right castor for every type of flooring. Various tread materials are available to choose from. They cover all operating requirements, for both indoor and outdoor applications. Series 3470 blue passivated, dustguard, wheel axle with nut Available as: 3470 Swivel castor 3471 Swivel castor with directional lock 3477 Swivel castor with total lock 3478 Fixed castor Fittings: Noise-reduced Industrial Castors Hard wheels transfer shocks and bumps from uneven surfaces directly to the mobile container. These thumps are further transferred to the load carried, hence increasing the noise level considerably. This happens during loading and unloading of the delivery trucks and when the roll containers moved. Therefore, strict noise levels have been set for some areas, such as residential neighbourhoods, and only the use of special noisereducing castors and wheels can assure that the noise remains under these limits. We developed various solutions in order to offer the benefit provided by a hard wheel material, and at the same time, the favourable characteristics of a wheel with a soft tread. db (A) Noise Schalldruckpegelmessungen level measurement Measurement Messaufbau nach setup Richtlinie according 2000 to / EC 14 Directive EG 2000/14 EG 86 84 82 80 78 76 74 72 70 1 2 3 4 Noise-reduced wheels: HUR Wheel centre: Polyamide elastic solid rubber tyre, Tread: Polyamide, Polyamide tread Elastic solid rubber Polyamide wheel centre Wheel sizes Load capacities: 100 mm Wheel-Ø 160 kg per castor 125 mm Wheel-Ø 200 kg per castor POS Wheel centre: Polypropylene, white, with threadguards, blue,, noise reduced Polypropylene tread Roller bearing Shock absorbing element made of foamed Polyurethane Plate Bolt hole 13 mm UOR 125 2500 N HUR 125 2000 N POS/UOT 125 125 2000 N UFR 125 2500 N Load Tragfähigkeit capacity Tragfähigkeit Load capacity Tragfähigkeit Load capacity Load Tragfähigkeit capacity Wheel sizes Load capacities 100 mm Wheel-Ø 160 kg per castor 125 mm Wheel-Ø 200 kg per castor UOT Wheel centre: Polyamide, white, with threadguards, blue, precision ball bearing, noise reduced Polyamide tread Precision ball bearing Shock absorbing element made of foamed Polyurethane 4 Wheel sizes Load capacities 100 mm Wheel-Ø 250 kg per castor 125 mm Wheel-Ø 300 kg per castor
Wheels for assembly in series 3470 PVO/PVR/PIR Wheel centre: Polypropylene, black Tread: solid rubber, black PVO = plain bearing PVR = Wheel sizes: 080 mm to 200 mm Ø Load capacities: 70 kg to 205 kg PIR = tread: solid rubber, grey, non-marking DVR/DIR Wheel rims: pressed steel, zinc-chromatised Tread: solid rubber, black DIR = Tread: solid rubber, grey, non-marking Load capacities: 70 kg to 205 kg UAR/UAD Wheel centre: Polyamide Tread: Polyurethane UAR = UAD =, stainless Wheel sizes: 080 mm to 200 mm Ø Load capacities: 150 kg to 500 kg UFR/UFP blue, non-marking Wheel centre: Polyamide, black Tread: elastic-tyre, blue, non-marking, UFR = UFP = precision ball bearing Wheel sizes: 100 mm and 125 mm Ø Load capacities: 160 kg and 250 kg PJR Wheel centre: Polypropylene Tread: TENTEprene (thermoplastic rubber), grey non-marking, Shore A 85 Load capacities: 080 kg to 160 kg POO / POR Wheel made of Polypropylene, black POO = plain bearing Wheel sizes: 065 mm to 125 mm Ø Load capacities: 120 kg to 200 kg POR = Wheel sizes: 080 mm to 125 mm Ø Load capacities: 120 kg to 200 kg UFR/UFD/UFP/UFX grey, non-marking Wheel centre: Polyamide, grey Tread: elastic-tyre, grey, non-marking UFR = UFD =, stainless UFP = precision ball bearing UFX = precision ball bearing, sealed Load capacities: 160 kg to 400 kg UER/UED/UEP/UEX Wheel centre: Polyamide, grey Tread: elastic-tyre, black UER = UED =, stainless UEP = precision ball bearing UEX = precision ball bearing, sealed Load capacities: 160 kg to 400 kg UOO/UOR/UOD Wheel made of Polyamide, white UOO = plain bearing Wheel sizes: 080 mm to 200 mm Ø Load capacities: 200 kg to 800 kg UOR = UOD =, stainless Load capacities: 200 kg to 400 kg UOP Wheel made of Polyamide, white with threadguards precision ball bearing Wheel sizes: 100 mm, 125 mm and 200 mm Ø Load capacities: 200 kg to 800 kg 5
Swivel castors with central lock Series 3476... P67, Series 8476... P67 Swivel castors in our series 3476 have a central lock / total lock. The locking mechanism is integrated in the plate. The wheel running and swivel action are locked simultaneously at a central point. Linked actuation systems allow for multiple castors to be locked simultaneously. Foot operation possible Easy actuation due to large foot pedal The new swivel castors in our series 3476/8476, P 67 are compatible with all swivel, fixed and locking castors in our series 3470/3472 and Stainless Steel castors in our series 8470. Existing transport equipment can be retrofitted. blue passivated, dustguard, wheel axle with nut UFR/UFD Wheel centre: Polyamide UFP/UFX Tread: elastic-tyre, grey, non-marking, with small threadguards, UFR = UFD =, stainless UFP = precision ball bearing UFX = precision ball bearing, sealed UER/UED Wheel centre: Polyamide UEP/UEX Tread: elastic-tyre, black, with small threadguards, UER = UED =, stainless UEP = precision ball bearing UEX = precision ball bearing, sealed Series 3476... P67, 8476... P67 Wheel sizes: 160 mm and 200 mm Ø Load capacity: 300 kg per castor 6
Swivel castor with central lock Series 3479... P69... /P70... and 3471... P69... /P70... Swivel castors in our series 3479 have a centrally activated wheel lock. Swivel castors in our series 3471 have a central lock / directional lock. blue passivated, dustguard, wheel axle with nut Fittings: P69: Plate size P63 P70: Plate size P62 Further information see page 12. UFR/UFP Wheel centre: Polyamide Tread: elastic-tyre, grey non-marking, without threadguards, UFR = UFP = precision ball bearing UER/UEP Wheel centre: Polyamide Tread: elastic-tyre, black, without threadguards UER = UEP = precision ball bearing Wheel sizes: 125 mm to 200 mm Ø Load capacity: 250 kg to 300 kg per castor Series 3479 Series 3471 7
Castors with total lock for mobile waste containers Series 3472 Metal or synthetic material mobile waste containers must be easy to manoeuvre and stand safely even when full. That is why we have developed special castors for waste bins. They are extremely robust and are designed to withstand the total weight of the bin as well as the specific dynamic loads. Swivel castors in our series 3472 with total lock at head end of castor. With these castors, the locking mechanism must be activated individually for each castor. A total lock castor system consists of: 2 pieces 3470 Swivel castors 2 pieces 3472 Swivel castors with total lock 2 pieces directional lock Type 1 for mobile waste containers made of synthetic material This castor meets the regulations for mobile waste containers according DIN EN 840-5 and RAL-GZ 951/1 (SKZ-Certificate No. 116/03). yellow zinc-chromatised, riveted, dustguard, wheel axle with nut PXU/ Wheel centre: Polypropylene PVU Tread: solid rubber, black synthetic-plain-bearing Wheel sizes: Load capacities: 160 mm Wheel-Ø 135 kg per castor 200 mm Wheel-Ø 205 kg per castor Type 2 for mobile waste containers made of steel This castor meets the regulations for mobile waste containers according DIN EN 840-5 (SKZ-Certificate No. 53905). blue zinc-chromatised, riveted, dustguard, wheel axle with nut DXR Wheel centre: pressed steel Tread: solid rubber, black, DVP Wheel centre: pressed steel, Tread: solid rubber, black, precision ball bearing Wheel sizes: Load capacities: 160 mm Wheel-Ø 135 kg per castor 200 mm Wheel-Ø 205 kg per castor Directional lock 3470 DXR / DVP 200 P63 3472 PXU / PVU 200 P63 8
Castors with central lock for mobile waste containers Series 3476... P69 Swivel castors in our series 3476 with integrated central lock. Two of these castors are interlinked with a rod. When the locking pedal is activated, both the wheel running and swivel action are blocked simultaneously on both castors. A total lock castor system consists of: 2 pieces 3470 swivel castor 2 pieces 3476...P69, L0-11 Swivel castors central and total lock 2 pieces directional lock Directional lock Type 1 for mobile waste containers made of synthetic material This castor meets the regulations for mobile waste containers according DIN EN 840-5 and RAL-GZ 951/1 (SKZ-Certificate No. 116/03). yellow-zinc-chromatised, riveted, dustguard, wheel axle with nut PXU Wheel centre: Polypropylene Tread: solid rubber, black, synthetic-plain-bearing Wheel sizes: 200 mm Ø Load capacity: 205 kg per castor Type 2 for mobile waste containers made of steel This castor meets the regulations for mobile waste containers according DIN EN 840-5 (SKZ-Certificate No. 53905). blue-zinc-chromatised, riveted, dustguard, wheel axle with nut DVR Wheel centre: pressed steel Tread: solid rubber, black, DVP Wheel centre: pressed steel Tread: solid rubber, black, precision ball bearing Wheel sizes: 200 mm Ø Load capacity: 205 kg per castor Series 3476... P69 9
Fixed castor with central or dead man lock Series 349... P69... /Series 849... P69... Series 3499/8499... Fixed castors of the series 3499/8499 with integrated locking mechanism. The cam perpendicular is always to the long side of the plate. Three functions are available: Q0: The locking mechanism is activated through the cam via a lever. The lever reverses automatically to the base position. Q1 = The locking mechanism is activated through the cam via a lever. Model 1: The lever remains in the set position. The lever has to be actuated again to reverse the brake bolt to position 0. Q2 = The locking mechanism is activated through the cam via a lever. The lever remains in the set position. The lever has to be actuated again to reverse the brake bolt to position 0. As an alternative, the lever also reverses automatically to the base position. Cam bore perpendicular to the long side of plate. Series 3499 Fork made of pressed steel, bright zinc plated, blue passivated, wheel axle with nut. Series 8499 Fork made of Stainless Steel, wheel axle with nut. Series 349D/849D... Fixed castor with dead man lock, central brake release. Series 349D Fork made of pressed steel, bright zinc plated, blue passivated, wheel axle with nut. Series 849D Fork made of Stainless Steel, wheel axle with nut. Plate fitting with integrated central lock. UFR/UFD Wheel centre: Polyamide UFP/UFX Tread: elastic-tyre, grey, non-marking, with small threadguards, UFR = UFD =, stainless UFP = precision ball bearing UFX = precision ball bearing, sealed UER/UED Wheel centre: Polyamide UEP/UEX Tread: elastic-tyre, black, with small threadguards, UER = UED =, stainless UEP = precision ball bearing UEX = precision ball bearing, sealed Wheel sizes: 160 mm and 200 mm Ø Load capacities: 300 kg and 350 kg per castor Series 3499/8499 Series 349D/849D 10
Stainless Steel castors Series 8470 Thanks to outstanding technology and perfect craftsmanship, TENTE Stainless Steel castors are immune to exceptional operating conditions. They show no damage, even in the long term, when exposed to water, ice, fluctuating temperatures, salt, grease or cleaning agents. Stainless Steel castors can be specially equipped for use in particular fields of application, e. g. for use in bakeries, with heat-resistant wheels which can withstand temperatures of + 280 C. Series 8470 Housing made of Stainless Steel, wheel axle with nut Available as: 8470 Swivel castor 8478 Fixed castor 8477 Swivel castor with total lock UFX Wheel centre: Polyamide Tread: elastic-tyre, grey non-marking, with small threadguards, precision ball bearing, sealed UFD Wheel centre: Polyamide Tread: elastic-tyre, grey non-marking,, stainless UAD Wheel centre: Polyamide, white Tread: Polyurethane, purple,, stainless UOO Wheel: Polyamide, white, plain bearing Wheel sizes: 80 mm to 200 mm Ø Load capacity: up to 500 kg per castor Stainless Steel castors with heat resisting wheels: Available as: 8470 Swivel castor 8478 Fixed castor IDG Wheel centre: Aluminium Tread: heat resisting rubber, damping, with threadguards, self-lubricating bushing, temperature range from - 30 C to + 250 C Our heat resistant wheels can be used for up to 5 minutes at an ambient temperature of 310 C. However, the temperature of the tread must not be allowed to exceed 250 C. Fittings: Wheel size: 100 mm Ø Load capacity: 80 kg per castor Plate Bolt hole 13 mm BOG Wheel made of duroplastic, self-lubricating bushing, temperature range from - 40 C to + 280 C Higher temperatures are possible in the short term. We shall be happy to advise you. Wheel sizes Load capacities: 080 mm Ø 100 kg per castor 100 mm Ø 125 kg per castor 11
Explanation to the locking system Series 3479... P69... /P70... and 3471... P69... /P70... The World in Motion. TENTE-ROLLEN GmbH Herrlinghausen 75 D - 42929 Wermelskirchen Germany Phone: +49 (0) 21 96 / 99 0 Fax: +49 (0) 21 96 / 99 127 e-mail: info@tente.de Internet: www.tente.com 0 = automatic reverse to cam position The locking mechanism is activated through the cam via a lever. Model 0: The lever reverses automatically to the base position: L0-11 = cam bore parallel to the long side of plate, SW 11 mm Q0-11 = cam perpendicular to the long side of the plate, SW 11 mm L0-13 = cam bore parallel to the long side of plate, SW 13 mm Q0-13 = cam perpendicular to the long side of the plate, SW 13 mm 1 = without automatic reverse to cam position The locking mechanism is activated through the cam via a lever: Model 1: The lever remains in the set position. The lever has to be actuated again to reverse the brake bolt to position 0. L1-11 = cam bore parallel to the long side of plate, SW 11 mm Q1-11 = cam perpendicular to the long side of the plate, SW 11 mm L1-13 = cam bore parallel to the long side of plate, SW 13 mm Q1-13 = cam perpendicular to the long side of the plate, SW 13 mm P 69 = Plate size P63 P 69 - Q 0-11 - L 1-13 2 Plate sizes cam perpendicular based to the long/parallel side of the plate cam position size of the cam hex hole (SW) 2 = automatic and manual reverse by the rotation to the left or right side This locking mechanism has a double function by actuation into different directions. Q2-11 = cam perpendicular to the long side of the plate, SW 11 mm Q2-13 = cam perpendicular to the long side of the plate, SW 13 mm Wrench size (SW) P 70 = Plate size P62 P 70 - Q 0-11 - L 1-13 2 Plate sizes cam perpendicular based to the long/parallel side of the plate cam position size of the cam hex hole (SW) L0-11 = Locking mechanism for mobile waste containers Please ask for our catalogue and visit us online: www.tente.com 12 01/2013 Copyright