Bracket Typically @ 1200 ELITE SYSTEMS 402 Top Sheet set out typically for straight sheets * Varies - See Table 39 75 Varies - See Table 32 Bracket Height 100mm 150mm 160mm 180mm 185mm 200mm 220mm Halter Size Cavity Depth 189mm 199mm 219mm 224mm 239mm 259mm 279mm Insulation Thickness 200mm 220mm 260mm** 280mm 300mm Elite System 4 Insulation Value Overall System Depth U Value at 1.5M Centres Nominal Weight/M² 139mm 160mm 215mm 0.35 13.49 kg/m² 15.89 kg/m² 265mm 275mm 295mm 300mm 315mm 335mm 355mm 0.24 0.23 0.21 0.20 0.19 0.18 0.16 Kn 40 RW 14.02 kg/m² 17.02 kg/m² 14.27 kg/m² 17.57 kg/m² 14.53 kg/m² 18.13 kg/m² 14.53 kg/m² 18.13 kg/m² 14.79 kg/m² 18.69 kg/m² 15.05 kg/m² 19.25 kg/m² 15.31 kg/m² 19.81 kg/m² 260mm 299mm 320mm 375mm 0.15 15.57 kg/m² 20.37 kg/m² 280mm 319mm 340mm 395mm 0.14 15.83 kg/m² 20.93 kg/m² 300mm 339mm 360mm 415mm 0.13 16.09 kg/m² 21.49 kg/m² *Some adjustment of the halter setout for sheets may be required ** Rockwool not available in standard thickness, weights calculated to next available thickness Other U Values available please consult Euroclad Suitable for pitches down to 1
ELITE SYSTEM 4 SIDE LAP DETAIL ELITE SYSTEM 4 END DETAIL Stainless Steel Halter (see drawing blocks for detailed drawings) Quattro bar & bracket depending on U Value typically @ 1.2m centres Min 60 Stainless Steel Halter (see drawing blocks for detailed drawings) Quattro bar & bracket 50mm x 1mm butyl sealing tape 4mm Bead class A butyl sealant MW5L Liner 0.7mm MW5L Liner 0.7mm COLOUR SIDE (IF APPLICABLE ) COLOUR SIDE MW5L 0.7 Steel Liner side lap detail
Bracket Typically @ 1200 402 Top Sheet set out typically for straight sheets * Varies - See Table 39 75 Varies - See Table 32 Bracket Height 150mm Halter Size Cavity Depth 157mm Acoustic Insulation Insulation Thickness 180mm Elite System 4 A2 Insulation Value Overall System Depth 265mm U Value at 1.5M Centres 0.24 Nominal Weight/M² Kn 40 RW 14.75 kg/m² 17.45 kg/m² 160mm 167mm 180mm 275mm 0.23 14.76 kg/m² 17.46 kg/m² 180mm 187mm 200mm 295mm 0.21 15.02 kg/m² 18.02 kg/m² 185mm 192mm 220mm 300mm 0.20 15.27 kg/m² 18.57 kg/m² 200mm 207mm 315mm 0.19 15.52 kg/m² 19.12 kg/m² 220mm 227mm 335mm 0.18 15.54 kg/m² 19.14 kg/m² 247mm 280mm 355mm 0.16 16.04 kg/m² 20.24 kg/m² 260mm 267mm 300mm 375mm 0.15 16.30 kg/m² 20.80 kg/m² 280mm 287mm 320mm 395mm 0.14 16.56 kg/m² 21.36 kg/m² 300mm 307mm 340mm 415mm 0.13 16.82 kg/m² 21.92 kg/m² *Some adjustment of the haltersetout for sheets may be required Suitable for pitches down to 1
ELITE SYSTEM 4 A2 SIDE LAP DETAIL ELITE SYSTEM 4 A2 END DETAIL Stainless Steel Halter (see drawing blocks for detailed drawings) Stainless Steel Halter (see drawing blocks for detailed drawings) Quattro bar & bracket to required depth typically @ 1.2m centres Vapour Control Layer Min 140 Quattro bar & bracket Acoustic Insulation Euroclad Perforated MW5L Liner 0.7mm Euroclad Perforated MW5L Liner 0.7mm COLOUR SIDE (IF APPLICABLE ) 60 8,7 COLOUR SIDE MW5LS 0.7 Steel Liner side lap detail 5 % OPEN AREA = c33%. FULLY PERFORATED SHEETS SUPPLIED AS STANDARD Continuity of vapour control and air tightness may be achieved by sealing VCL to other building elements and perimeter details. This may be facilitated by sealing VCL, profile fillers and flashings, extending VCL where appropriate and sealing to suitable details.the use of un-perforated liner at perimeters may also be considered.
400 19 19 EUROCLAD EUROSEAM 0.9mm EXTERNAL SHEET 58 87 13 57 R6,6 0,9 45 75 1,3 100 R4,3 100 100 5,5 100 1,7 COLOUR SIDE EUROCLAD MW5L 0.7mm LINER 1000 23 24 200 19 126 21 66 68 126 132 126 37 0,7 32 COLOUR SIDE
33 59 34 60 40 VARIES DEPENDING ON BRACKET HEIGHT 40 VARIES DEPENDING ON BRACKET HEIGHT Brackets less than 260mm require 2 fixings diagonally opposite. Brackets 260mm or more require 4 fixings. < 260mm 260mm
FIXED POINT FIXED POINT EUROCLAD ELITE SYSTEM 4 ROOF CONSTRUCTION Ridge Support Zed Ridge Flashing Ridge Closure FIXED POINT FIXED POINT A110 Aluminium Halter Pan Support Filler Euroclad MW5L 0.7 Steel Liner Liner Flashing Liner Flashing and filler fixed and sealed to liner to provide air tightness and vapour control Insulation excluded for clarity A range of mineral & glass wool insulations are available for different
EUROCLAD ELITE SYSTEM 4 ROOF CONSTRUCTION Ridge Support Zed Ridge Flashing Sliding Ridge Clip Ridge Closure & filler (allow sufficient clearance for anticipated expansion to halter) SS110 Stainless Steel Halter Pan Support Filler Euroclad MW5L 0.7 Steel Liner Liner Flashing Liner Flashing and filler fixed and sealed to liner to provide air tightness and vapour control Insulation excluded for clarity A range of mineral & glass wool insulations are available for different
EUROCLAD ELITE SYSTEM 4 ROOF CONSTRUCTION Verge Closure Verge Channel Verge Clip A110 Aluminium Halter Verge Flashing Liner Flashing and filler fixed and sealed to liner to provide air tightness and vapour control Euroclad 19/1000 0.4 Steel Liner Vented Euroclad 32/1000 0.5 or 0.7 Steel Insulation excluded for clarity A range of mineral & glass wool insulations are available for different
EUROCLAD ELITE SYSTEM 4 ROOF CONSTRUCTION Pan Support Filler SS110 Stainless Steel Halter Euroseam Drip Angle Closure Flashing Euroclad MW5L 0.7 Steel Liner Euroclad Gutter Flashing Liner Flashing and filler fixed and sealed to liner to provide air tightness and vapour control Euroclad 32/1000 0.7 Steel Gutter Straps Insulation excluded for clarity A range of mineral & glass wool insulations are available for different Euroclad 19/1000 0.4 Steel Liner