ISSUE 1/08/14 B E A R I N G S A N D C O M P O N E N T S

Contents Company Profile Products Wrapped Bearings Technical Information WMU & WMXMU & WMX Wrapped Bearings Metric Plain U Type Wrapped Bearings Metric Flanged U Type Wrapped Bearings Metric & Imperial, Strip & Washers U Type Wrapped Bearings Imperial Plain U Type Wrapped Bearings Metric Plain X Type Wrapped Bearings Imperial Plain X Type Wrapped Bearings Metric & Imperial, Strip & Washers X Type Wrapped Bearings Technical Information SWB & CuSn8 Wrapped Bearings Imperial Plain SWB Type Wrapped Bearings Metric Plain SWB Type Wrapped Bearings Metric Plain Bronze CuSn8 Wrapped Bearings Metric Flanged Bronze CuSn8 Fitting Instructions Cast Bronze Bearings with Graphite Lubrication Cast Bronze Bearings with Graphite Lubrication Plain Cast Bronze Bearings with Graphite Lubrication Flanged Cast Bronze Thrust Washers with Graphite Lubrication Cast Bronze Plates with Graphite Lubrication Plastic Bearings WMG & WMFG Series Mechanical Properties Plastic Bearings Metric Plain WMG Plastic Bearings Metric Flanged WMFG Plastic Thrust Washers WMWG Acetal Thrust Washers TWP Acetal Thrust Washers TWP Technical Data & Sizes Ball Bearings Ball Bearings Metric 6000 Series Ball Bearings Metric 60 & 6300 Series Ball Bearings Metric Miniature Series Ball Bearings Imperial Miniature Series Services and Information

(3 of the 5 Bowman Business Units) Introduction Bowman was founded in 1972 and in 1984 the manufacture of certain products commenced. As well as its own manufacture, the company holds exclusive agencies of other manufacturer s products, which complement Bowman s range. Bowman International Limited was first approved for ISO 9001: 1994 in 1999 and in 10 was approved to the later approval BS EN ISO 9001: 08 (Certificate No. 960929). Bowman is recognised as a leading supplier to original equipment manufacturers, stockists and distributors across a wide range of industries and is one of the leading companies in Europe specialising in the design, supply and manufacture of plain bearings, sintered components and brushes for electric motors. In 03 ball and needle bearings were introduced to our range. Bowman is now expanding into exporting throughout the world. Company objectives To continue to offer our customers the highest standard of service in our Industry. It is our intention to remain at the forefront of bearing supply and design and to continue our development into new bearing materials and lubricants. Bowman s product ranges:- Sintered components BowMet Bearings Wrapped bearings White metal bearings Solid bronze bearings Plastic bearings Composite bearings Carbon bearings Special designed bearings Brushes for electric motors & slip rings Carbon seals & products Ball bearings Needle bearings We pride ourselves in giving excellent service which includes:- Competitive pricing and payment terms Large stocks Next day delivery Just-in-time/kan ban scheduling Full technical and design service Machining facility for special sizes of bearings and carbon products Other products are being added to our range as the market dictates. We will also continue to tailor our range of products and services in line with our customers changing aspirations and requirements.

Products Dry Sliding Bearings Lubricated Sliding Bearings Standard Wrapped Bearings Self lubricated plain & flanged bearings & strip. Carbon steel shell with sintered bronze layer filled with PTFE. Available in metric and imperial sizes from stock. Also bronze shell versions can be supplied to order. Bronze Bearings with Graphite Lubrication Oil or grease lubricated bearings. Carbon steel shell with sintered bronze layer with a co- acetal polymer layer. Available in metric and imperial sizes from stock. Ball Bearings Oil or grease lubricated bearings. Carbon Steel shell with sintered bronze lining. Various metric and imperial sizes available from stock. White Metal Bearings Various material specifications are offered. Standard and special shapes are available. Ball bearings in chrome or stainless steel. ABEC 1, 3 or 5. With or without seals. Various ranges available from stock. Plastic Bearings Moulded & Machined White metal bearings can be manufactured to order in various material grades. CuSn8 Hard Bronze Bearings Revolutionary new wrapped bearings made in Toughmet spinodal bronze. For use in high load and harsh environmental applications. See seperate catalogue for details. Can be manufactured in many different types of plastic material to suit various applications. Machined for small quantities and moulded for large quantities. Offered with lubrication pockets, grooves or thru holes. Used for heavy load applications.

WMU and WMX and WMLF Self Lubricated Bearings Externally Lubricated Bearings (Dimensions and tolerances to ISO 3547) (Dimensions and tolerances to ISO 3547) Stock range includes Metric plain Metric flanged Metric washers Metric strip Imperial plain Imperial washers Imperial strip* WMU and WMLF Technical Data Summary Structure Steel support strip S.A.E 1010. Sintered Bronze layer. PTFE. PV 1.8 N/mm 2 x m/s Static load 2 N/mm 2 Dynamic load 140 N/mm 2 Maximum sliding speed 2.5 m/s dry 5.0 m/s with oil Operating temperature -0 C to +280 C Thermal conductivity 42 W/mK Coefficient of friction WMU Dry WMU Oiled WMLF Dry WMLF Oiled Recommended housing tolerance Recommended shaft tolerance Recommended shaft finish 0.02 to 0. 0.02 to 0.15 0.04 to 0.30 0.02 to 0.10 4.5mm/5.5mm H6 7.0mm/305mm H7 3.0mm/4.0mm h6 5.0mm/75mm f7 80mm/300mm h8 Ra 0.4um (N5) Recommended shaft hardness HB > 0 Stock range includes Metric plain Metric washers Metric strip Imperial plain* Imperial washers* Imperial strip* *Some sizes supplied to order only, minimum order quantity may apply. WMX Technical Data Summary Structure Steel support strip S.A.E 1010. Sintered Bronze layer. Co-Acetal polymer. Static load 140 N/mm 2 Dynamic load 70 N/mm 2 Maximum sliding speed 2.5 m/s with grease Operating temperature -40 C to +110 C Intermittent maximum 130 C temperature Thermal conductivity 2W/mK PV 2.8 N/mm 2 x m/s Coefficient of friction Recommended housing H7 tolerance Recommended shaft h8 tolerance Recommended shaft finish HB > 0 Recommended shaft hardness HB > 0 0.05 to 0. with grease WMUB Bronze Support Strip instead of Steel Has greater resistance to corrosion than standard WMU product. Range, dimensions and tolerances are as standard WMU product. Fitting Guidelines 1. Always use a fitting pin and fitting collar. See our fitting instructions on page. 2. Lubricate back of bearing prior to assembly. 3. Chamfer lead in on housing to assist with assembly. Bowman International Limited reserve the right to change specifications without prior notice. E & OE

3 4 5 6 7 8 10 13 14 15 16 17 Wrapped Metric Plain Bearings. PTFE U Type When Fitted +0.048 +0.048 +0.055 +0.055 Housing (Nominal OD) 4.5 5.5 7 8 +0.055 9 +0.055 +0.058 +0.058 +0.058 +0.058 +0.058 +0.058 +0.061 +0.061 10 14 15 16 17 19 +0.006 +0.008 +0.015 +0.015 3 4 5 6 +0.015 7 +0.015 8 10 13 14 15 16 17 Shaft -0.006-0.008-0.022-0.022-0.013-0.028-0.013-0.028-0.013-0.028-0.034-0.034-0.034-0.034-0.034-0.034-0.034 When Fitted Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume nonstandard sizes and tolerances. Length +/- 0.25 Part Number 3 TFP 03043 4 TFP 03044 5 TFP 03045 6 TFP 03046 3 TFP 04053 4 TFP 04054 6 TFP 04056 10 TFP 0405510 5 TFP 0705 8 TFP 0708 10 TFP 0710 6 TFP 060806 8 TFP 060808 10 TFP 060810 10 TFP 070910 8 TFP 081008 TFP 0810 8 TFP 10 10 TFP 1010 TFP 10 15 TFP 1015 TFP 10 TFP 14 15 TFP 1415 TFP 14 25 TFP 1425 10 TFP 131510 TFP 1315 10 TFP 141610 TFP 1416 15 TFP 141615 TFP 1416 25 TFP 141625 10 TFP 151710 TFP 1517 15 TFP 151715 TFP 1517 25 TFP 151725 10 TFP 1610 TFP 16 15 TFP 1615 TFP 16 25 TFP 1625 15 TFP 171915 TFP 1719 15 TFP 15 TFP 25 TFP 25 22 24 25 28 30 32 35 36 40 45 +0.071 22 +0.071 +0.071 +0.071 +0.071 +0.085 +0.085 +0.085 +0.085 +0.085 +0.085 +0.105 Housing (Nominal OD) 23 25 27 28 32 34 36 39 40 44 22 24 25 28 30 32 35 36 40 45 Shaft -0.0-0.0-0.0-0.0-0.0-0.0-0.0 Length +/- 0.25 Part Number 10 TFP 2210 10 TFP 2310 15 TFP 2315 TFP 23 25 TFP 2325 30 TFP 2330 15 TFP 222515 TFP 2225 25 TFP 222525 30 TFP 222530 TFP 2427 25 TFP 242725 30 TFP 242730 TFP 2528 15 TFP 252815 TFP 2528 25 TFP 252825 30 TFP 252830 TFP 2528 TFP 2832 25 TFP 283225 30 TFP 283230 15 TFP 303415 TFP 3034 25 TFP 303425 30 TFP 303430 40 TFP 303440 TFP 3236 30 TFP 323630 40 TFP 323640 TFP 3539 30 TFP 353930 35 TFP 353935 40 TFP 353940 TFP 3539 15 TFP 364015 35 TFP 364035 TFP 4044 30 TFP 404430 40 TFP 404440 TFP 4044 TFP 45 30 TFP 4530 40 TFP 4540 45 TFP 4545 TFP 45

Wrapped Metric Plain Bearings. PTFE U Type 55 60 65 70 75 80 85 90 95 100 105 110 When Fitted +0.110 +0.110 +0.110 +0.110 Housing (Nominal OD) 55 60 65 70 +0.110 75 +0.110 +0.155 +0.0 +0.155 +0.0 +0.155 +0.0 +0.155 +0.0 +0.155 +0.0 +0.155 +0.0 +0.155 +0.0 80 85 90 95 100 105 110 115 55 60 65 70 75 80 85 90 95 100 105 110 Shaft -0.030-0.060-0.030-0.060-0.030-0.060 Length +/- 0.25 Part Number TFP 55 30 TFP 5530 40 TFP 5540 TFP 55 60 TFP 5560 TFP 5560 25 TFP 556025 30 TFP 556030 40 TFP 556040 TFP 5560 60 TFP 556060 TFP 6065 30 TFP 606530 40 TFP 606540 60 TFP 606560 70 TFP 606570 30 TFP 657030 TFP 6570 60 TFP 657060 70 TFP 657070-0.030-0.060 70 TFP 707570-0.030-0.060-0.054-0.054-0.054-0.054-0.054-0.054-0.054 40 TFP 758040 TFP 7580 60 TFP 758060 80 TFP 758080 60 TFP 808560 100 TFP 8085100 60 TFP 859060 100 TFP 8590100 60 TFP 909560 100 TFP 9095100 60 TFP 9510060 100 TFP 95100100 60 TFP 10010560 70 TFP 10010570 80 TFP 10010580 115 TFP 100105115 60 TFP 10511060 115 TFP 105110115 60 TFP 11011560 115 TFP 110115115 115 1 5 130 135 140 145 1 155 160 165 170 175 0 0 210 2 2 280 300 When Fitted +0.155 +0.0 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.210 +0.070 +0.216 +0.070 Housing (Nominal OD) 1 5 130 135 140 145 1 155 160 165 170 175 0 5 +0.216 +0.070 5 +0.216 +0.070 215 +0.216 +0.070 +0.222 +0.070 +0.222 +0.070 +0.222 +0.070 225 255 285 305 Shaft 115 1 5 130 135 140 145 1 155 160 165 170 175 0 0 210 +0.052 +0.052 +0.052 2 2 280 300-0.054-0.054-0.063-0.063-0.063-0.063-0.063-0.063-0.063-0.063-0.063-0.063-0.063 Length +/- 0.25 Part Number TFP 1151 60 TFP 115160 70 TFP 115170 60 TFP 1560 100 TFP 15100 60 TFP 513060 100 TFP 5130100 60 TFP 13013560 100 TFP 130135100 60 TFP 13514060 100 TFP 135140100 60 TFP 14014560 100 TFP 140145100 60 TFP 145160 100 TFP 1451100 100 TFP 1155100 60 TFP 15516060 100 TFP 155160100 60 TFP 16016560 100 TFP 160165100 60 TFP 16517060 100 TFP 165170100 60 TFP 17017560 100 TFP 170175100 60 TFP 175060 100 TFP 1750100 60 TFP 0560-0.063 100 TFP 05100-0.072 100 TFP 05100-0.072 100 TFP 210215100 60 TFP 222560-0.072 100 TFP 2225100-0.072-0.081-0.081 60 TFP 225560 100 TFP 2255100 60 TFP 28028560 100 TFP 280285100 60 TFP 30030560 100 TFP 300305100 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Wrapped Metric Flanged Bearings. PTFE U Type When Fitted Housing (Nominal OD) Shaft Flange Dia +/- 0.5 Length +/- 0.25 Part Number 6 +0.055 8 +0.015 6-0.022 4 TFF 0604 7 TFF 0607 8 TFF 0608 8 +0.055 10 +0.015 8-0.013-0.028 15 5.5 TFF 0805515 7.5 TFF 0807515 TFF 0809515 7 TFF 1007 10 +0.058 10-0.013-0.028 9 TFF 1009 TFF 10 17 TFF 1017 7 TFF 17 +0.058 14-0.034 9 TFF 19 TFF 17 TFF 17 14 +0.058 16 14-0.034 22 TFF 1422 17 TFF 141722 15 +0.058 17 15-0.034 23 9 TFF 1923 TFF 1523 17 TFF 151723 16 +0.058 16-0.034 24 TFF 1624 17 TFF 161724 +0.061-0.034 26 TFF 26 17 TFF 1726 22 TFF 2226 +0.071 23-0.0 30 11.5 TFF 11530 16.5 TFF 16530 21.5 TFF 21530 25 +0.071 28 25-0.0 35 11.5 TFF 2511535 16.5 TFF 2516535 21.5 TFF 2521535 30 +0.085 34 30-0.0 42. 16 TFF 301642 26 TFF 302642 35 +0.085 39 35 47 16 TFF 351647 26 TFF 352647 40 +0.085 44 40 53 16 TFF 401653 26 TFF 402653 45 +0.105 45 58 16 TFF 451658 26 TFF 452658 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume nonstandard sizes and tolerances.

Strip. PTFE U Type Length Width Thickness 0 1 0 215 0 245 0 245 0 245 0 245 0.744 0.704 0.990 0.9 1.510 1.470 2.000 1.960 2.0 2.460 3.060 3.0 Part Number TFS 071 TFS 100 TFS 15240 TFS 240 TFS 25240 TFS 30240 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. Bowman International Limited reserve the right to change specifications without prior notice E & OE Washers. Metric. PTFE U Type Washers. Imperial. PTFE U Type Outside Thickness Hole Dia Hole PCD Part Number Outside Thickness Hole Dia Hole PCD Part Number 10 14 16 22 24 26 30 32 36 38 1. -0.2 1.45 1. 1.90-0.2 1.45 1.60 1. -0.2 1.45 1. -0.2 1.45 1. -0.2 1.45 1. -0.2 1.45 1. -0.2 1.45 No hole - 2.40 2.10 2.40 2.10 2.40 2.10 3.40 3.10 3.40 3.10 22 25 28 30 TFW 10015 TFW 24015 TFW 1426015 TFW 1630015 TFW 315 TFW 36015 TFW 2238015 1/2 9/16 5/8 11/16 0.063 0.077 0.692 7/8 TFWTH06 0.061 0.067 0.682 1 0.063 0.061 1 1/8 0.063 0.061 1 3/16 0.063 0.061 0.077 0.067 0.109 0.099 0.109 0.099 0.786 0.776 0.880 0.870 0.942 0.932 TFWTH07 TFWTH08 TFWTH09 3/4 1 1/4 0.063 0.109 1.005 TFWTH10 0.061 0.099 0.995 13/16 7/8 1 3/8 1 0.063 0.061 0.063 0.061 0.109 0.099 0. 0. 130 140 1.099 1.089 1. 1. 2 192 TFWTH11 TFWTH 24 26 28 32 38 42 48 52 62 95 42 44 48 54 62 66 74 78 90 115 1. -0.2 1.45 1. -0.2 1.45 1. -0.2 1.45 1. -0.2 1.45 1. -0.2 1.45 1. -0.2 1.45 2.00-0.2 1.95 2.00-0.2 1.95 2.00-0.2 1.95 2.00-0.2 1.95 3.40 3.10 3.40 3.10 4.40 4.10 4.40 4.10 4.40 4.10 4.40 4.10 4.40 4.10 4.40 4.10 4.40 4.10 4.40 4.10 33 35 38 43 54 61 65 76 106 TFW 24415 TFW 2644015 TFW 2848015 TFW 3254015 TFW 38615 TFW 4266015 TFW 487402 TFW 527802 TFW 629002 TFW 95112 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 0.063 0.061 0.140 0.130 1.380 1.370 TFWTH14 0.063 0.171 1.567 2 0.061 0.161 1.557 TFWTH16 2 1/8 2 1/2 0.063 0.061 0.063 0.061 0.171 0.161 1.692 1.682 0.063 0.171 1.807 0.061 0.161 1.797 0.2 0.192 2.005 1.995 TFWTH TFWTH TFWTH22 1 5/8 2 5/8 0.063 0.2 2.130 TFWTH24 0.061 0.192 2.1 1 3/4 2 2 1/8 2 1/4 2 3/4 0.063 0.061 0.2 0.192 2.255 2.245 TFWTH26 3 0.093 0.2 2.5 0.091 0.192 2.495 TFWTH30 3 1/8 0.093 0.091 0.2 0.192 2.630 2.6 TFWTH32 2 1/4 0.093 0.2 2.755 TFWTH34 3 1/4 0.091 0.192 2.745 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume nonstandard sizes and tolerances.

Wrapped Imperial Plain Bearings. PTFE U Type Shaft 3 16 +0.00 1 4 +3 3 16-0.0010 0.75-8 0.2-3 0.75-0.0017 1 4 +0.00 5 16 +3 1/4-0.0010 0.2-8 0.35-3 0.2-0.0019 L +/- 0.01 Part Number 3/16 TFPI03TH03 3/8 TFPI03TH06 1/4 TFPI04TH04 TPFI04TH06 5/16 +0.00 3/8 +3 5/16-0.0010 3/8 TFPI05TH06 0.35-8 0.375-3 0.35-0.0019 1/2 TFPI05TH08 3/8 +0.0019 15/32 +3 3/8-0.0010 0.375-8 0.4688-4 0.375-0.0019 7/16 +0.0019 17/32 +3 7/16-0.0010 0.4375-8 0.5313-4 0.4375-0.00 1/2 +0.0019 19/32 +3 1/2-0.0010 0.0-8 0.5938-4 0.0-0.00 9/16 +0.0019 21/32 +3 9/16-0.0010 0.5625-8 0.6563-4 0.5625-0.00 5/8 +0.00 23/32 +4 5/8 0.625-8 0.78-4 0.625 3/8 1/2 TFPI06TH06 TFPI06TH08 5/8 TFPI06TH10 3/4 TFPI06TH 1/2 TFPI07TH08 3/8 1/2 TFPI08TH06 TFPI08TH08 7/8 TFPI08TH14 1/2 TFPI09TH08 1/2 TFPI10TH08 7/8 TFPI10TH14 11/16 +0.00 25/32 +4 11/16-0.0010 7/8 TFPI11TH14 0.6875-8 0.7813-4 0.6875-0.00 3/4 +0.0025 7/8 +5 3/4-9 0.7-7 0.875-3 0.7-0.0021 7/8 +0.0025 1 +5 7/8-9 0.875-7 1.000-3 0.875-0.0021 1/2 3/4 TFPITH08 TFPITH 1 TFPITH16 3/4 TFPI14TH 1 TFPI14TH16 1 +0.0026 1 1/8 +6 1-9 1 TFPI16TH16 1.000-8 1.5-4 1.000-0.0021 1 1/4 TFPI16TH 1 1/8 +0.0028 1 9/32 +5 1 1/8-0.00 1.5-0.0010 1.2813-5 1.5-0.0024 3/4 TFPI16TH 1 1/2 TFPI16TH24 3/4 TFPITH 1 1/4 1 TFPITH16 +0.0028 1 13/32 +5 1 1/4-0.00 1.2-0.0010 1.4063-5 1.2-0.0028 1 1/4 TFPITH 1 3/8 1.375 When Fitted +0.0029-0.0010 1 17/32 1.5313 Housing (Nominal OD) -0.0010-0.00 +5 1 3/8-0.00-5 1.375-0.0028 1 4 TFPI03TH04 3/8 3/4 TFPI07TH 5/8 TFPI08TH10 3/4 TFPI09TH 5/8 3/4 7/8 1 3/4 1 3/4 TFPI14TH14 TFPITH16 TFPITH TFPITH28 1 TFPI22TH16 1 3/8 TFPI22TH22 1 3/4 TFPI10TH10 TFPI10TH TFPI22TH28 When Fitted Shaft 1 1/2 +0.0028 1 21/32 +5 1 1/2-0.00 1.0-0.0010 1.6563-5 1.0-0.0028 1 5/8 +0.0028 1 25/32 +5 1 5/8-0.00 1.625-0.0010 1.7813-5 1.625-0.0028 1 3/4 +0.0035 1 15/16 +6 1 3/4-0.0013 1.7-0.0011 1.9375-4 1.7-0.0029 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. Bowman International Limited reserve the right to change speci ications without prior notice E & OE 1 7/8 1.875 +8-4 2 +0.0037 2 3/16 +8 2.000-0.0011 2.75-4 2 1/4 2.2 +0.0037-0.0011 1 7/8-0.0013 1.875-0.0029 2-0.0013 2.000-0.0031 +0.0073 2 7/16 +2 2 1/4 +7 +9 2.4375-0.0010 2.2-0.0011 2 1/2 +0.0077 2 11/16 +6 2 1/2 +0.0011 2.0 +0.0013 2.6875-6 2.0-7 2 3/4 +0.0066 2 15/16-5 2 3/4-0.00 2.7 +2 2.9375-0.0017 2.7 0 3 +0.0068 3 3/16-3 3.000 +2 3.75-0.0017 3 1/2 +0.0068 3.0 +2 4 +0.0068 4.000 +2 2 1/16 2.0625 3 11/16-3 3.6875-0.0017 4 3/16-3 4.75-0.0017 5 +0.0056 5 3/16-0.0015 5.000-0.00 5.75-0.0031 6 +0.0070 6 3/16-0.0010 6.000 +2 6.75-0.0017 7 +0.0026 7 3/16 7.000-0.0044 7.75 Housing (Nominal OD) 3-0.00 3.000 0 3 1/2-0.0022 3.0 0 4-0.0022 4.000 0 5-0.0014 5.000-0.0039 6-0.0025 6.000 0 L +/- 0.01 Part Number 1 TFPI24TH16 1 1/4 TFPI24TH 1 1/2 TFPI24TH24 2 TFPI24TH32 1 TFPI26TH16 1 1/2 TPFI26TH24 1 TFPI28TH16 1 1/2 TFPI28TH24 1 3/4 TFPI28TH28 2 TFPI28TH32 1 TFPI30TH16 1 7/8 TFPI30TH30 2 1/4 TFPI30TH36 1 TFPI32TH16 1 1/2 TFPI32TH24 2 TFPI32TH32 2 1/2 TFPI32TH40 2 TFPI36TH32 2 1/4 TFPI36TH36 2 1/2 TFPI36TH40 3 TFPI36TH48 2 TFPI40TH32 2 1/2 TFPI40TH40 3 TFPI40TH48 3 1/2 TFPI40TH56 2 TFPI44TH32 2 1/2 TFPI44TH40 3 TFPI44TH48 3 1/2 TFPI44TH56 2 TFPI48TH32 3 TFPI48TH48 3 3/4 TFPI48TH60 2 1/2 TFPI56TH40 3 TFPI56TH48 3 3/4 TFPI56TH60 3 TFPI64TH48 3 3/4 TFPI64TH60 4 3/4 TFPI64TH76 3 TFPI80TH48 3 3/4 TFPI80TH60 3 TFPI96TH48 3 3/4 TFPI96TH60-0. 0045 7-0. 0046 3 3/4-0.0063 TFPI1TH3 7.000-0. 007 1

Wrapped Metric Plain Bearings. Acetal X Type When Fitted Housing (Nominal OD) Shaft Oil Hole Dia L +/- 0.25 Part Number When Fitted Housing (Nominal OD) Shaft Oil Hole Dia L +/- 0.25 Part Number 8 +0.108 10 8-0.022 No 8 TPX 081008 hole 10 TPX 081010 TPX 0810 25 +0.131 28 25-0.033 6 15 TPX 252815 TPX 2528 25 TPX 252825 10 TPX 1010 30 TPX 252830 10 14 15 +0.108 +0.108 +0.108 +0.108 14 16 17 10 14-0.022-0.027-0.027 15-0.027 4 4 4 4 TPX 10 15 TPX 1015 TPX 10 10 TPX 1410 TPX 14 15 TPX 1415 TPX 14 25 TPX 1425 15 TPX 141615 TPX 1416 25 TPX 141625 10 TPX 151710 TPX 1517 15 TPX 151715 28 30 32 35 +0.155 +0.060 +0.155 +0.060 +0.155 +0.060 +0.155 +0.060 32 34 36 39 28 30 32 35-0.033-0.033-0.039-0.039 6 6 6 6 TPX 2832 25 TPX 283225 30 TPX 283230 TPX 3034 30 TPX 303430 40 TPX 303440 TPX 3236 30 TPX 323630 35 TPX 323635 40 TPX 323640 TPX 3539 30 TPX 353930 35 TPX 353935 25 TPX 151725 TPX 3539 16 +0.108 16-0.027 4 15 TPX 1615 TPX 16 25 TPX 1625 40 +0.155 +0.060 44 40-0.039 8 TPX 4044 30 TPX 404430 40 TPX 404440 22 24 +0.131 +0.131 +0.131 +0.131 23 25 27 22 24-0.027-0.033-0.033-0.033 4 4 6 6 15 TPX 15 TPX 25 TPX 25 10 TPX 2310 15 TPX 2315 TPX 23 25 TPX 2325 30 TPX 2330 15 TPX 222515 TPX 2225 25 TPX 222525 30 TPX 222530 15 TPX 242715 TPX 2427 25 TPX 242725 45 55 +0.195 +0.080 +0.0 +0.080 +0.0 +0.080 55 60 45 55-0.039-0.039-0.046 8 8 8 TPX 4044 TPX 45 30 TPX 4530 40 TPX 4540 45 TPX 4545 TPX 45 40 TPX 5540 TPX 55 60 TPX 5560 TPX 5560 25 TPX 556025 30 TPX 556030 40 TPX 556040 TPX 5560 30 TPX 242730 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume nonstandard sizes and tolerances.

Wrapped Metric Plain Bearings. Acetal X Type When Fitted Housing (Nominal OD) Shaft Oil Hole Dia L +/- 0.25 Part Number When Fitted Housing (Nominal OD) Shaft Oil Hole Dia L +/- 0.25 Part Number 60 +0.0 +0.080 65 60-0.046 8 30 TPX 606530 40 TPX 606540 60 TPX 606560 115 +0.267 1 115-0.054 70 60 TPX 1151 TPX 115170 TPX 1560 70 TPX 606570 40 TPX 657040 1 +0.272 5 1-0.054 100 TPX 15100 110 TPX 15110 65 70 75 80 85 100 +0.262 +0.262 +0.262 +0.267 +0.267 +0.267 70 75 80 85 90 105 65 70 75 80 85-0.046-0.046-0.046-0.046-0.054 100-0.054 8 8 TPX 6570 60 TPX 657060 70 TPX 657070 25 TPX 707525 40 TPX 707540 TPX 7075 60 TPX 707560 70 TPX 707570 80 TPX 707580 40 TPX 758040 60 TPX 758060 80 TPX 758080 40 TPX 808540 60 TPX 808560 80 TPX 808580 100 TPX 8085100 30 TPX 859030 40 TPX 859040 60 TPX 859060 80 TPX 859080 100 TPX 8590100 TPX 100105 60 TPX 10010560 80 TPX 10010580 95 TPX 10010595 115 TPX 100105115 5 130 135 140 145 1 160 170 +0.272 +0.280 +0.280 +0.280 +0.280 +0.280 +0.280 +0.280 130 135 140 145 1 155 165 175 5 130 135 140 145 1-0.063-0.063-0.063-0.063-0.063-0.063 160-0.063 170-0.063 60 TPX 513060 100 TPX 5130100 110 TPX 5130110 TPX 130135 60 TPX 13013560 80 TPX 13013580 100 TPX 130135100 60 TPX 13514060 80 TPX 13514080 TPX 140145 60 TPX 14014560 80 TPX 14014580 100 TPX 140145100 100 TPX 1451100 TPX 1155 60 TPX 115560 80 TPX 115580 100 TPX 1155100 TPX 160165 60 TPX 16016560 80 TPX 16016580 100 TPX 160165100 TPX 170175 60 TPX 17017560 80 TPX 17017580 105 +0.267 110 105-0.054 60 TPX 10511060 115 TPX 105110115 100 TPX 170175100 TPX 05 110 +0.267 115 110-0.054 60 TPX 11011560 110 TPX 110115110 115 TPX 110115115 0 +0.286 5 0-0.063 60 TPX 0560 80 TPX 0580 100 TPX 05100 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume nonstandard sizes and tolerances.

Wrapped Metric Plain Bearings. Acetal X Type When Fitted Housing (Nominal OD) Shaft Oil Hole Dia L +/- 0.25 Part Number TPX 190195 60 TPX 19019560 190 +0.286 195 190-0.072 80 TPX 19019580 100 TPX 190195100 1 TPX 1901951 TPX 05 0 +0.286 5 0-0.072 60 TPX 0560 80 TPX 0580 100 TPX 05100 1 TPX 051 TPX 2225 2 +0.286 225 2-0.072 60 TPX 222560 80 TPX 222580 100 TPX 2225100 1 TPX 22251 TPX 240245 240 +0.286 245 240-0.072 60 TPX 24024560 80 TPX 24024580 100 TPX 240245100 1 TPX 2402451 TPX 2255 2 +0.292 255 +0.052 2-0.072 60 TPX 225560 80 TPX 225580 100 TPX 2255100 1 TPX 22551 TPX 260265 260 +0.292 265 +0.052 260-0.081 60 TPX 26026560 80 TPX 26026580 100 TPX 260265100 1 TPX 2602651 TPX 280285 280 +0.292 285 +0.052 280-0.081 60 TPX 28028560 80 TPX 28028580 100 TPX 280285100 1 TPX 2802851 60 TPX 30030560 300 +0.292 305 +0.052 + 300 - -0.081 80 TPX 30030580 100 TPX 300305100 1 TPX 3003051 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Wrapped Imperial Plain. Acetal X Type When Fitted 3/8-0.0054 15/32 +6 3/8 0.375-0.0083 0.4688-1 0.375 7/16 0.4375 1/2 0.0 Housing (Nominal OD) -0.0056 17/32 +6-0.01 0.5313-1 Shaft 2-0.0111 7/16 2 0.4375-0.01-0.0083 19/32 +6 1/2 3-0.0056 0.5313-1 0.0-0.0113 9/16-0.0083 21/32 +6 9/16 3 0.5625-0.0056 0.6563-1 0.5625-0.0083 Part Number 3/8 TFPI06TX06 3/4 TFPI06TX 1/2 TFPI07TX08 3/4 TFPI07TX 3/8 TFPI08TX06 1/2 TFPI08TX08 5/8 TFPI08TX10 7/8 TFPI08TX14 1/2 TFPI09TX08 3/4 TFPI09TX 1/2 TFPI10TX08 5/8-0.0083 23/32 +7 5/8 4 5/8 TFPI10TX10 0.625-0.0055 0.7813-1 0.625-0.0114 3/4 TFPI10TX 11/16-0.0088 25/32 +7 11/16 5 0.625-0.0055 0.7813-1 0.625-0.0115 3/4-0.0088 7/8 +0.0010 3/4-0.0110 0.7-0.0056 0.875 +0.0002 0.7-0.02 7/8-0.0086 1 +8 7/8 9 0.875-0.0054 1.000-0 0.875-0.01 1-0.0088 1 1/8 +8 1 1.000-0.0056 1.5-0 1.000-0.04-0.01 1 1/8-0.0088 1 9/32 +8 1 1/8-0.01 1.5-0.0048 1.2813-1 1.5-0.04 1 1/4-0.0086 1 13/32 +9 1 1/4 1.2-0.0048 1.4063-1 1.2 1 3/8-0.0086 1 17/32 +9 1 3/8-0.0115 1.375-0.0048 1.5313-1 1.375-0.0131 L +/- 0.01 1/2 TFPI06TX08 7/8 TFPI10TX14 7/8 TFPI11TX14 1/2 TFPITX08 3/4 TFPITX 1 TFPITX16 3/4 TFPI14TX 7/8 TFPI14TX14 1 TFPI14TX16 3/4 TFPI16TX 1 TFPI16TX16 1 1/2 TFPI16TX24 3/4 TFPITX 1 TFPITX16 3/4 TFPITX -0.0113 1 TFPITX16-0.09 1 1/4 TFPITX 1 3/4 TFPITX28 1 TFPI22TX16 1 3/8 TFPI22TX22 1 3/4 TFPI22TX28 When Fitted Housing (Nominal OD) Shaft 1 1/2-0.0086 1 21/32 +0.00 1 1/2-0.0116 0.0-0.0048 0.6563-2 0.0-0.0132 1 5/8-0.0086 1 25/32 +9 1 5/8-0.0117 1.625-0.0048 1.7813-1 1.625-0.0133 1 3/4-0.0085 1 15/16 +0.0010 1 3/4 7 1.7-0.0039 1.9375-0 1.7-0.0085 1 7/8-0.0035 2 1/16 +0.00 1 7/8-0.0116 1.875-0.0083 2.0625-0 1.875-0.0132 2-0.0037 2 3/16 +0.00 2-0.01 2.000-0.0085 2.75-0 2.000-0.0137 2 1/4-0.0037 2 7/16 +0.00 2 1/4-0.01 2.2-0.0085 2.4375-0 2.240-0.0140 2 1/2-0.0037 2 11/16 +0.00 2 1/2-0.05 2.0-0.0085 2.6875-0 2.0-0.0143 2 3/4-0.0043 2 15/16 +0.00 2 3/4-0.0149 2.7 7 2.9375-0.00 2.7 7 3-0.0041 3 3/16 +0.0014 3-0.0151 3.000 7 3.75-0 3.000 9 3 1/2-0.0041 3 11/16 +0.0014 3 1/2-0.0156 3.0 7 3.6875-0 3.0-0.0178 4-0.0041 4 3/16 +0.0014 4 1 4.000 7 4.75-3 4.000-0.03 L +/- 0.01 Part Number 1 TFPI24TX16 1 1/4 TFPI24TX 1 1/2 TFPI24TX24 2 TFPI24TX32 1 TFPI26TX16 1 1/2 TFPI26TX24 1 TFPI28TX16 1 1/2 TFPI28TX24 1 3/4 TFPI28TX28 2 TFPI29TX32 1 TFPI30TX16 1 7/8 TFPI30TX30 2 1/4 TFPI30TX36 1 TFPI32TX16 1 1/2 TFPI32TX24 2 TFPI32TX32 2 1/2 TFPI32TX40 2 TFPI36TX32 2 1/4 TFPI36TX36 2 1/2 TFPI36TX40 2 TFPI40TX32 2 1/2 TFPI40TX40 2 TFPI44TX32 2 1/2 TFPI44TX40 3 TFPI44TX48 3 1/2 TFPI44TX56 2 TFPI44TX32 3 TFPI44TX48 3 3/4 TFPI44TX60 2 1/2 TFPI56TX40 3 TFPI56TX48 3 3/4 TFPI56TX60 3 TFPI64TX48 3 3/4 TFPI64TX60 4 3/4 TFPI64TX76 Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Strip. Acetal X Type Length Width Thickness 460 70 460 100 460 100 460 100 0 0 1.03 1.07 1.52 1.56 2.01 2.05 2.52 2.57 3.02 3.09 Part Number TXS10070 TXS15100 TXS100 TXS25100 TXS300 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. Bowman International Limited reserve the right to change specifications without prior notice E & OE Washers. Metric. Acetal X Type Washers. Imperial. Acetal X Type 14 16 22 24 26 28 32 38 42 48 52 24 Outside Thickness 1.0-0.2 1.4 26 1.577-0.2 1.487 30 32 36 38 42 1.577-0.2 1.487 1.577-0.2 1.487 1.577-0.2 1.487 1.577-0.2 1.487 1.577-0.2 1.487 44 1.577-0.2 1.487 48 54 62 66 74 78 1.577-0.2 1.487 Hole Dia 1.90 1.60 2.40 2.10 2.40 2.10 3.40 3.10 3.40 3.10 3.40 3.10 3.40 3.10 Hole PCD +/- 0. Part Number TXW TXW14 TXW16 TXW TXW TXW22 TXW24 TXW26 4.40 4.10 38 TXW28 1.577 4.40-0.2 1.487 4.10 43 TXW32 1.577 4.40-0.2 1.487 4.10 TXW38 1.577-0.2 1.487 2.600-0.2 2.510 2.40 2.10 4.40 4.10 4.40 4.10 TXW42 TXW48 2.600 4.40-0.2 2.510 4.10 65 TXW52 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. 22 25 28 30 33 35 54 61 1/2 9/16 5/8 11/16 3/4 13/16 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 2 2 1/8 1 1 1/8 Outside 1 3/16 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/8 2 1/2 2 5/8 2 3/4 3 2 1/4 7/8 2 1/4 3 1/8 3 1/4 Thickness Hole Dia Hole PCD 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.066 0.062 0.097 0.093 0.097 0.093 0.097 0.093 0.077 0.067 0.692 0.682 0.077 0.786 0.067 0.776 0.077 0.067 0.109 0.099 0.109 0.099 0.109 0.099 0.140 0.1 0.140 0.130 0.171 0.161 0.171 0.161 0.171 0.161 0.2 0.192 0.2 0.192 0.2 0.192 0.2 0.192 0.2 0.192 0.2 0.192 0.786 0.776 0.880 0.870 1.005 0.995 1.099 1.089 1.192 1.2 1.380 1.370 1.567 1.557 1.692 1.682 Part Number TFWTX06 TFWTX07 TFWTX08 TFWTX09 TFWTX10 TFWTX11 TFWTX TFWTX14 TFWTX16 TFWTX 1.817 1.807 TFWTX 2.005 1.995 2.130 2.1 2.255 2.245 2.5 2.495 2.630 2.6 2.755 2.745 TFWTX22 TFWTX24 TFWTX26 TFWTX28 TFWTX30 TFWTX32 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Standard Wrapped Bearings CuSn8 Wrapped Bearings (Dimensions and tolerances to ISO 3547) Stock range includes Metric plain Imperial plain (Some sizes supplied to order only, minimum order quantity may apply.) Standard Wrapped BearingsTechnical Data Summary (Dimensions and tolerances to ISO 3547) Stock range includes Metric plain Metric washers Metric strip Imperial plain Imperial washers Imperial strip CuSn8 Technical Data Summary Static Load Grease Lubrication Max Speed Maximum PV Value Coefficient of Friction Oil Lubrication Max Speed Maximum PV Value Coefficient of Friction Max Working Temperature Grease Lubrication Lubrication Alloy Hardness 1 N/mm 2 2.5m/s 2.8N/mm 2 x m/s 0.5-0.15 10m/s 10N/mm 2 x m/s 0.5-0. 1 C 2 C HB 60-100 Bowman International Limited reserve the right to change specifications without prior notice. E & OE Static load Dynamic load Maximum sliding speed Operating temperature Intermittent maximum temperature Thermal conductivity Coefficient of friction Max. PV Value Tensile Strength Yeild Point Hardness 1 N/mm 2 40 N/mm 2 2.5 m/s with grease -100 C to +0 C 130 C 60W/mK Elongation 40% 0.08-0.25 2.8 N/mm 2 x m/s 4 N/mm 2 2 N/mm 2 HB 90-1 Fitting Guidelines 1. Always use a fitting pin and fitting collar. See our fitting data sheet. 2. Lubricate back of bearing prior to assembly. 3. Chamfer lead in on housing to assist with assembly.

Metric Plain Standard Wrapped Bearings Bore of Bush when in Housing 10 13 14 15 16 19 22 24 25 26 28 30 32 34 35 36 38 40 42 44 45 46 48 52 55 58 +0.022 +0.027 +0.027 +0.027 +0.027 +0.027 +0.027 +0.033 +0.033 +0.033 +0.033 +0.033 +0.033 +0.033 +0.033 +0.039 +0.039 +0.039 +0.039 +0.039 +0.039 +0.039 +0.039 +0.039 +0.039 +0.039 +0.039 14 15 16 17 22 23 25 27 28 30 32 34 36 38 39 40 42 44 46 48 51 53 55 57 60 63 Housing Shaft 10 13 14 15 16 19 22 24 25 26 28 30 32 34 35 36 38 40 42 44 45 46 48 52 55 58-0.013-0.028-0.028-0.028-0.028-0.028-0.028-0.028-0.0-0.0-0.0-0.0-0.0-0.0-0.0-0.0-0.030-0.060-0.030-0.060-0.030-0.060 10 15 25 30 40 60 1010M 10M 1310M 1410M 1510M No oil hole or oil groove is present in metric size. 1015M 15M 1315M 1415M 1515M 1615M 15M 1915M 15M 2215M 2415M 2515M 10M M 13M 14M 15M 16M M M 22M 24M 25M 26M 28M 30M 32M 34M 35M 36M 38M 40M 42M 44M Bush Length (+/- 0.25mm) 1325M 1425M 1525M 1625M 25M 1925M 25M 2225M 2425M 2525M 2625M 2825M 3025M 3225M 3425M 3525M 3625M 3825M 4025M 4225M 4425M Standard Lengths 1930M 30M 2230M 2430M 2530M 2630M 2830M 3030M 3230M 3430M 3530M 3630M 3830M 4030M 4230M 4430M 4530M 4630M 4830M 30M 5230M 5530M 5830M 2640M 2840M 3040M 3240M 3440M 3540M 3640M 3840M 4040M 4240M 4440M 4540M 4640M 4840M 40M 5240M 5540M 5840M 32M 34M 35M 36M 38M 40M 42M 44M 45M 46M 48M M 52M 55M 58M 4560M 4660M 4860M 60M 5260M 5560M 5860M Wall Thickness Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. 1.056 1.007 1.056 1.007 1.056 1.007 1.056 1.007 1.056 1.007 1.056 1.007 1.056-1.007 1.559 1.7 1.559 1.7 1.559 1.7 1.559 1.7 1.559 1.7 2.059 2.010 2.059 2.010 2.059 2.010 2.059 2.010 2.059 2.010 2.059 2.010 2.059 2.010 2.059 2.010 2.059 2.010 2.059 2.010 2.059 2.010 2.562 2.513 2.562 2.513 2.562 2.513 2.562 2.513 2.562 2.513 2.562 2.513 2.562 2.513 SWB and CuSn8

Imperial Plain Standard Wrapped Bearings 3/8 Bore of Bush when in Housing +0.009 Housing 15/32 3/8 Shaft Standard Lengths 3/8 1/2 5/8 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 Wall Thickness 5/32 Oil Hole diameter 1/4 Oil Hole 1/4 or 3/8 1/4 or 5/16 Oil Hole 3/8 Oil Hole diameter diameter Oil Hole 0.049 - -0.019 13 14 2305 16 0.047 7/16 17/32 7/16-0.0-0.022 1403 1404 1406 0.049-0.047 1/2 19/32 1/2-0.0 0.049 - -0.022 1603 1604 1605 1606 1607 0.047 9/16 21/32 9/16-0.0-0.022 04 05 06 07 0.049-0.047 5/8 23/32 5/8-0.0 0.049 - -0.022 03 04 05 06 07 08 0.047 11/16 25/32 +0.0 11/16-0.0-0.022 25 26 27 0.049-0.047 3/4 +0.0 7/8 +0.0 3/4 0.065 - -0.028 2404 2405 2406 2408 2410 0.063 13/16 +0.0 15/16 +0.0 13/16-0.028 2606 2608 0.065-0.063 7/8 +0.0 1 +0.0 7/8 0.065- -0.065 2804 2806 2808 2810 0.063 15/16 1 +0.0 +0.0 1 1/8 1 1/16 +0.0 +0.0 15/16 1-0.064-0.065 3004 3006 08 3010-0.064 0.065 - -0.065 34 36 38 3210 32 0.063 0.065-0.063 1 1/8 +0.0 19/32 +0.016 1 1/8-0.6-0.7 3606 3608 3610 36 0.080-0.078 1 1/4 +0.016 1 13/32 +0.016 1 1/4-0.6 0.080 - -0.7 4006 4008 4010 40 4014 0.078 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 +0.016 +0.016 +0.016 +0.016 +0.016 1 17/32 1 21/32 1 25/32 +0.016 +0.016 +0.016 1 15/16 +0.016 2 1/16 2 3/16 2 1/4 2 7/16 2 1/2 2 3/4 3 2 11/16 2 15/16 3 3/16 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/4 2 1/2 2 3/4 3-0.7-0.8 4406 4408 4410-0.7 0.080 - -0.8 4806 4808 4810 48 4814 4816 0.078-0.7-0.8 56 58 5210-0.002 0.096 - -0.003 5608 5610* 56* 5614* 5616* 0.094-0.002-0.003 6008 6010* -0.002 0.096 - -0.004 6408 6410* 64* 6414* 6416* 64 64 0.094-0.002-0.004 78 7210-0.002 0.096 - -0.004 8010* 80* 8014* 8016* 80 80 8022 0.094-0.002-0.004-0.002 0.096 - -0.004 9616* 96 96 9622 9624 0.094 44 52 60* 72* 4414 5214 6014* 7214* 5216 6016* 7216* 8816* 60 72 88 72 88 8822 8824 0.080-0.078 0.080-0.078 0.096-0.094 0.096-0.094 0.096-0.094 * denotes larger of the 2 oil holes quoted. Lining thickness as supplied: 0.03 minimum Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Metric Plain Wrapped Bronze CuSn8 Bore of Bush when in Housing 22 24 25 28 Housing H7 +0.043 +0 0.. 021 000 +0.052 25 Shaft +0. 0 10-0. 013 10 +0.043 0. 000-0. 028 1010 +0.043 14-0.034 1410 14 +0.043 16 +0. 0 0.000 14-0.034 141610 15 +0.043 17 15-0.034 151710 16 +0.043 16-0.034 1610 +0. 0. 052 000-0.034 Standard Lengths 10 15 25 30 40 60 70 80 10 1415 151715 15 14 1517 16 151725 25-0.0 2310 2315 23 2325 2330 22-0.0 +0.052 24-0.0 27 +0.052 28 25-0.0 +0.052-0.0 32 28 30 +0.052 34 32 35 +0.062 36 +0.062 39 40 +0.062 45 44 30-0.0 32 35 40 +0.062 45 +0.062 55 60 +0.074 +0.074 65 +0.074 70 75 80 +0.074 55 60-0.030 55-0.060 65 70 75 +0.074 80 +0.074 23 85-0.030 60-0.060-0.030 65-0.060-0.030 70-0.060-0.030 75-0.060-0.030 80-0.060 222510 1015 141615 1615 222515 242715 252815 283215 303415 323615 353915 ID < 80 Length +/- 0.25 ID > 80 Length +/- 0. 10 1416 2225 2427 2528 2832 3034 3236 3539 4044 45 55 5560 141625 1625 222525 242725 252825 283225 303425 323625 353925 404425 4525 5525 556025 606525 222530 242730 252830 283230 303430 323630 353930 404430 4530 5530 556030 606530 657030 707530 758030 808530 303440 323640 353940 404440 4540 5540 556040 606540 657040 707540 758040 808540 3236 3539 4044 45 55 5560 6065 6570 7075 7580 8085 5560 556060 606560 657060 707560 758060 808560 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. 606570 657070 707570 758070 808570 657080 707580 758080 808580

Metric Plain Wrapped Bronze CuSn8 Bore of Bush when in Housing Housing Standard Lengths Shaft 30 40 60 70 80 90 100 ID < 80 Length +/- 0.25 ID > 80 Length +/- 0. 85 +0.087 90-0.036 85-0.071 859030 859040 8590 859060 859070 859080 90 +0.087 95 90-0.036-0.071 909530 909540 9095 909560 909570 909580 95 +0.087 100-0.036 95-0.071 9510040 95100 9510060 9510070 9510080 9510090 95100100 100 +0.087-0.036 105 100-0.071 100105 10010560 10010570 10010580 10010590 100105100 105 +0.087-0.036 110 105-0.071 105110 10511060 10511070 10511080 10511090 105110100 110 +0.087-0.036 115 110-0.071 110115 11011560 11011570 11011580 11011590 110115100 115 +0.087 1 115-0.036-0.071 1151 115160 115170 1150 115190 1151100 1 +0.087 5 1-0.036-0.071 1560 1570 1580 1590 15100 5 130 5-0.043-0.083 513060 513070 513080 513090 5130100 130 135 130-0.043-0.083 13013560 13013570 13013580 13013590 130135100 135 140 135-0.043-0.083 13514060 13514070 13514080 13514090 135140100 140 145-0.043 140-0.083 14014560 14014570 14014580 14014590 140145100 145-0.043 1 145-0.083 145160 145170 1450 145190 1451100 1 155 1-0.043-0.083 115560 115570 115580 115590 1155100 155-0.043 160 155-0.083 15516060 15516070 15516080 15516090 155160100 160-0.043 165 160-0.083 16016560 16016570 16016580 16016590 160165100 165 170-0.043 165-0.083 16517060 16517070 16517080 16517090 165170100 170 175 170-0.043-0.083 17017560 17017570 17017580 17017590 170175100 175 0 175-0.043-0.083 175060 175070 175080 175090 1750100 0 5 0-0.043-0.083 0560 0570 0580 0590 05100 5 +0.115 190 5-0.096 519060 519070 519080 519090 5190100 190 +0.115 195 190-0.096 19019560 19019570 19019580 19019590 190195100 195 +0.115 0 195-0.096 1960 1970 1980 1990 19100 0 +0.115 5 0-0.096 0560 0570 0580 0590 05100 5 +0.115 210 5-0.096 521060 521070 521080 521090 5210100 215 +0.115 2 215-0.096 215260 215270 215280 215290 2152100 2 +0.115 225 2-0.096 222560 222570 222580 222590 2225100 225 +0.115 230 225-0.096 22523060 22523070 22523080 22523090 225230100 230 +0.115 235 230-0.096 23023560 23023570 23023580 23023590 230235100 240 +0.115 245 240 +0.096 24024560 24024570 24024580 24024590 240245100 2 +0.115 255 2 +0.096 225560 225570 225580 225590 2255100 260 +0.052 +0.056 265 260 +0.108 26026560 26026570 26026580 26026590 260265100 270 +0.052 +0.056 275 270 +0.108 27027560 27027570 27027580 27027590 270275100 280 +0.052 +0.056 285 280 +0.108 28028560 28028570 28028580 28028590 280285100 290 295 +0.052 290 +0.056 +0.108 29029560 29029570 29029580 29029590 290295100 300 305 +0.052 300 +0.056 +0.108 30030560 30030570 30030580 30030590 300305100 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Metric Flanged Wrapped Bronze CuSn8 Bore of Bush when in Housing 25 30 35 40 45 55 +0.052 +0.052 Housing 28 34 +0.062 39 +0.062 +0.062 44 +0.062 55 +0.074 60 +0.074 65 +0.074 60 65 70 25 30 35 Shaft 40 45 Flange Dia -0.0 35-0.0 45 55-0.030-0 060 60-0.030-0.060 55 Standard Lengths 5 10 15 25 30 35 40 60 ID < 80 Length +/- 0.25 ID > 80 Length +/- 0. 251535 2535 3045 252535 302545 35 3525 402555 253035 303045 3530 403055 60 453060 65 70 75 65-0.030 80-0.060 3065 603075 653080 303545 3535 403555 453560 3565 553070 553570 603575 653580 404055 454060 4065 554070 604075 654080 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. 4560 65 5570 6075 6580 606075 656080 Bore of Bush when in Housing 70 75 80 90 100 110 1 130 140 1 160 170 0 190 0 225 2 265 285 300 +0.074 +0.074 +0.074 +0.087 +0.087 +0.087 +0.087 +0.115 +0.115 +0.115 +0.115 75 80 85 95 105 115 5 135 145 155 165 175 5 195 5 230 255 270 290 305 Housing +0.052 +0.052 +0.052 +0.052 Standard Lengths Shaft Flange 35 40 60 70 80 90 Dia ID < 80 Length +/- 0.25 ID > 80 Length +/- 0. 70-0.030 85-0.060 703585 704085 7085 706085 707085 75-0.030 90-0.060 753590 754090 7590 756090 757090 80-0.030 100-0.060 8040100 80100 8060100 8070100 8080100 90-0.036 110-0.071 90110 9060110 9070110 9080110 9090110 100-0.036 1-0.071 1001 100601 100701 100801 100901 110-0.036 130-0.071 110130 11060130 11070130 11080130 11090130 1-0.036 140-0.071 160140 170140 0140 190140 130-0.043 155-0.083 13060155 13070155 13080155 13090155 140-0.043 165-0.083 14060165 14070165 14080165 14090165 1-0.043-0.083 0 1600 1700 00 1900 160-0.043 190-0.083 16060190 16070190 16080190 16090190 170-0.043 0 BF F BF F BF F BF F -0.083 170600 170700 170800 170900 0-0.043 215-0.083 060215 070215 080215 090215 190-0.096 225 19060225 19070225 19080225 19090225 0 235-0.096 060235 070235 080235 090235 225 BF F BF F B FF -0.096 260 22560260 22570260 22580260 BF F 22590260 2 290-0.096 260290 270290 280290 290290 265-0.056 BF F BF F BF F BF F 305-0.108 26560305 26570305 26580305 26590305 285-0.056 325-0.108 28560325 28570325 28580325 28590325 300-0.056 340 BF F BF F BF F BF F -0.108 30060340 30070340 30080340 30090340 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Recommended Fitting Instructions for Plain and Flanged Wrapped Bearings Bearing ID Below 55mm Bearing ID Above 55mm Bearing ID Below 1mm Fitting of Flanged Bearings Assembly Forces Required Max Assembly Forces Please note that oiling the OD, the amount of interference, the surface finish of the housing and the lead in chamfer on the bore in the housing, can have a considerable effect on the forces required.

Cast bronze bearings with solid graphite lubrication Oilless TM All these bearings are made to order. Other shapes can be offered. Graphite loaded bearings can withstand very high temperatures up to 425 ⁰C (800 ⁰F) as well as cryogenic temperatures down to -0⁰C (-400 ⁰F) depending on the bronze material and graphite selected. This makes them ideal where conventional lubricants would carbonise. Please contact our technical department to ascertain which would be the most suitable combination to suit your application. Typical applications are ovens, kilns, dryers, injection moulding machines, dust collectors, louvers and hot conveyors. These bearings are also ideal in dry environments where contamination is undesirable. Typical applications would be printing, textile, and food machinery, as well as machines for making pills and cosmetic products. They are also used extensively for wet applications where there is high humidity, or in submersed pumps, textile finishing machinery, lock gates, water turbines, chemical processing and plating applications. This type of bearing is also useful where the bearings are in an inaccessible location, as they are lubricated for life. Technical Data Standard Material Cu 65%, Zn 25%, Ai 6%, Mn 4% Density 8 g/cm 3 Hardness > 210 HB Tensile Strength 7 N/mm 2 Elongation > % Linear Expansion 1.9 10-5 / ⁰C Max Temp 300 ⁰C (570 ⁰F) Static Load 100 N/mm 2 Max Speed 15 m/s PV 0 N/mm 2 s m/s Other cast bronze materials/specifications are available which can operate up to 425 ⁰C. Different shapes can be manufactured to suit customer requirements.

Metric Plain cast bronze bearings with solid graphite lubrication Shaft Housing Outside m6 F7 8 10 15 16 25 30 35 40 60 70 80 Standard Lengths -0.10/-0.30mm 8 +0.028 +0.013 +0.007 08 0810 08 0815 10 +0.028 +0.013 14 +0.007 101408 101410 1014 101415 1014 +0.034 +0.016 +0.007 10 15 16 25 30 13 +0.034 +0.016 19 +0.008 131910 131915 131916 14 +0.034 +0.016 +0.008 1410 14 1415 14 1425 1430 15 +0.034 +0.016 21 +0.008 152110 1521 152115 152116 1521 1525 152130 16 +0.034 +0.016 +0.034 +0.016 22 24 +0.008 162210 1622 +0.008 24 162215 2415 162216 2416 1622 24 162225 2425 162230 2430 162235 2435 162240 2440 +0.041 28 +0.0 +0.008 2810 22 +0.041 +0.0 32 +0.009 28 2232 2815 223215 2816 28 2232 2825 223225 2830 2835 2840 28 25 30 +0.041 +0 0 +0.041 +0.0 33 38 35 45 40 +0.009 2533 +0.009 3038 253315 303815 253316 2533 3038 +0.009 3545 +0.009 40 253325 303825 354525 4025 253330 303830 354530 4030 45 55 +0.011 455530 60 +0.011 6030 62 +0.011 6230 253335 303835 354535 4035 455535 6035 6235 253340 303840 354540 4040 455540 6040 6240 2533 3038 3545 40 4555 60 62 253360 303860 354560 4060 455560 6060 6260 4070 6070 6270 4080 6080 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Metric Plain cast bronze bearings with solid graphite lubrication Shaft Housing Outside m6 F7 +0.011 30 35 40 60 70 80 100 1 130 140 1 6530 6540 55 +0.060 70 +0.011 557040 60 60 63 65 607430 607435 607440 65 5570 6560 557060 607460 Standard Lengths -0.10/-0.30mm 6570 557070 607470 6580 607480 +0.011 607530 607535 607540 6075 607560 607570 607580 6075100 70 +0.060 85 +0.013 708535 708540 6580 7085 70 +0.060 90 +0.013 7090 75 75 80 +0.060 65 74 +0.060 75 809640 8096 637560 658060 708560 709060 759060 759560 809660 637570 658070 708570 709070 759070 759570 809670 637580 658080 708580 709080 759580 759580 809680 7085100 7590100 7595100 8096100 80961 80 +0.060 100 +0.013 8010040 80100 8010060 8010070 8010080 80100100 801001 80100140 90 +0.071 110 +0.036 +0.013 9011030 90110 9011060 9011070 9011080 90110100 901101 100 +0.071 1 +0.036 +0.013 100160 100170 1000 1001100 10011 1001140 110 +0.071 130 +0.036 +0.015 11013080 110130100 1101301 1 +0.071 140 +0.036 +0.015 114080 1140100 11401 1140140 5 +0.083 145 +0.043 +0.015 5145100 51451 130 +0.083 +0.043 1 140 +0.083 +0.043 160 1 +0.083 +0.043 170 160 +0.083 +0.043 0 +0.011 +0.060 75 +0.011 +0.060 +0.036 80 +0.060 +0.060 +0.060 90 95 96 +0.011 +0.013 +0.013 +0.013 +0.015 +0.015 +0.015 +0.015 6074 1301100 140160100 1170100 1600100 1301130 140160140 11701 16001 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Metric Flanged cast bronze - with solid graphite lubrication L1 L1 ø ø ø Shaft Housing E7 Outside r6 ø A L1-0.10 15 25 30 35 40 60 80 100 Standard Lengths -0.10/-0.30mm 10 14 +0.034 +0.023 +0.032 13 +0.032 14 +0.032 15 +0.032 16 +0.032 22 +0.061 25 +0.061 30 +0.061 31.5 +0.075 35 +0.075 40 +0.075 45 +0.075 +0.034 +0.023 22 2 25 3 101415 15 19 +0.041 +0.028 26 3 131915 +0.041 +0.028 21 +0.041 +0.028 30 +0.075 60 55 +0.090 +0.060 60 +0.090 +0.060 63 70 +0.090 +0.060 75 +0.090 +0.060 80 +0.090 +0.060 90 +0.107 +0.072 100 +0.107 +0.072 1 +0.107 +0.072 27 3 +0.041 +0.028 29 3 +0.041 +0.028 35 +0.034 40 +0.034 40 +0.034 45 +0.034 +0.034 55 +0.060 +0.041 65 +0.060 +0.041 +0.060 +0.041 75 +0.062 +0.043 85 100 1415 28 3 152115 162215 1014 1319 14 1521 1622 1525 162225 40 5 3015 30 3025 45 5 253515 5 2535 3040 5 31540 253525 304025 152130 162230 3030 253530 304030 304035 3154035 3040 253540 304040 60 5 3545 354530 354540 65 5 40 4030 4040 70 5 455530 4540 75 5 6030 6040 80 5 556540 85 7.5 607540 3040 3545 40 45 60 6075 4560 6060 556560 607580 +0.062 +0.043 90 7.5 637580 +0.073 +0.051 +0.073 +0.051 110 +0.076 +0.054 1 +0.076 +0.054 140 +0.088 +0.063 105 7.5 1 10 7085 8010060 130 10 9011060 1 10 170 10 708580 8010080 9011080 1000 14080 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. 80100100 1001100 1140100

Metric Flanged cast bronze with solid graphite lubrication L1 L1 ø ø ø Shaft Housing E7 Outside r6 ø A L1 15 25 30 35 45 55 65 Standard Lengths -0.10/-0.30mm +0.032 +0.034 +0.023 25 4 P 15 16 +0.032 22 +0.041 +0.028 30 5 P 1622 +0.061 28 +0.041 +0.028 36 5 P 2825 25 +0.061 33 +0.034 43 5 P 253330 30 +0.061 38 +0.034 48 5 P 303835 40 +0.075 +0.034 60 5 P 4045 +0.075 62 +0.060 +0.041 75 6 P 6255 60 +0.090 +0.060 75 +0.062 +0.043 90 7 P 607565 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Cast bronze thrust washers with solid graphite lubrication Part Number d D T Bolt D₁ Q ty Size d₁ GRW 103003 10.2 30 3 - - - - GRW 4003.2 40 3 28 2 M3 3.5 GRW 134003 13.2 40 3 28 2 M3 3.5 GRW 144003 14.2 40 3 28 2 M3 3.5 GRW 1503 15.2 3 35 2 M3 3.5 GRW 1603 16.2 3 35 2 M3 3.5 GRW 1603N 16.2 3 - - - - GRW 03.2 3 35 2 M3 3.5 GRW 05.2 5 35 2 M5 6 GRW 05N.2 5 - - - - GRW 2555 25.2 55 5 40 2 M5 6 GRW 2555N 25.2 55 5 - - - - GRW 306005 30.2 60 5 45 2 M5 6 GRW 357005 35.2 70 5 2 M5 6 GRW 408007 40.2 80 7 60 2 M6 7 GRW 459007 45.3 90 7 67.5 2 M6 7 GRW 10008.3 100 8 75 4 M6 7 GRW 5511008 55.3 110 8 85 4 M6 7 GRW 60108 60.3 1 8 90 4 M8 9 GRW 658 65.3 5 8 95 4 M8 9 GRW 7013010 70.3 130 10 100 4 M8 9 GRW 7514010 75.3 140 10 110 4 M8 9 GRW 80110 80.3 1 10 1 4 M8 9 GRW 9017010 90.5 170 10 140 4 M10 11 GRW 10019010 100.5 190 10 160 4 M10 11 GRW 1010 1.5 0 10 175 4 M10 11 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Cast bronze wear strips with solid graphite lubrication Part Number W L a b Type GRS GRS 75 75 GRS 100 100 GRS 1 1 GRS 28 28 _ GRS 2875 28 75 GRS 28100 28 100 GRS 281 28 1 GRS 38 38 _ GRS 3875 38 75 GRS 38100 38 100 GRS 381 38 1 GRS 4875 48 75 _ GRS 48100 48 100 _ GRS 485 48 5 GRS 481 48 1 A 45 A 70 A 60 B A 45 A 70 A 60 B A 45 A 70 A 60 B 45 A 70 A 95 A 60 B GRS 7575 75 75 45 45 C GRS 75100 75 100 45 70 C GRS 755 75 5 45 95 C GRS 751 75 1 45 60 D GRS 100100 100 100 70 70 C GRS 1005 100 5 70 95 C GRS 1001 100 1 70 60 D Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

Mechanical properties WMG series (Thermoplastic composite bushes) Min / Max operating temperature -40ºC to +130 ºC Tensile strength 210 MPa Compressive strength 5 MPa (80N/mm 2 ) Maximum load 80 MPa Shore D hardness 80 Coefficient of friction 0.08 0.15 Material nominal density 1.45 g/cm 3 Modulus of elasticity 7800 MPa Recommended shaft finish Ra 0.4 m (N5) Recommended Shaft Hardness HRC60 Maximum sliding velocity - constant 1 m/s Maximum sliding velocity - short period (Rotational) 2 m/s Maximum sliding velocity (Linear) 4 m/s Material Thermoplastic with Fibres and solid lubricants PA66 + GF + PTFE Recommended Fitting Data for WMG plain and flanged bushes (Dimensions and tolerances to Din 1494) Housing Shaft Size Bore of bush once fitted Flange outside diameter H7 h9 E10 d13 Flange thickness +0/-0.14 Fitting Guidelines Always use a fitting pin Chamfer lead in on housing to assist with assembly RoHS compliant Suitable for food industry machinery All testing carried out at ºC All dimensions and clearances are based on steel housings being used. Small allowances must be made for softer housing materials such as Aluminium. Bowman International Limited reserve the right to change specifications without prior notice. E & OE. Recommended Fitting Data for WMG washers Shaft Size h9

WMG Metric Plain Plastic Bearings Reference WMG 0103 WMG 03 WMG 024 WMG 0304 WMG 0405 WMG 046 WMG 0407 WMG 06 WMG 07 WMG 0607 WMG 0608 WMG 0708 WMG 0709 WMG 0809 WMG 0810 WMG 0911 WMG 1011 WMG 10 WMG 13 WMG 14 WMG 15 WMG 16 WMG 1315 WMG 1315 WMG 1416 WMG 1516 WMG 1517 WMG 16 WMG WMG 1922 WMG 21 WMG 22 WMG 23 WMG 2224 WMG 2225 WMG 2427 WMG 2526 WMG 2528 WMG 2630 WMG 2730 WMG 2832 WMG 3031 WMG 3034 WMG 3236 WMG 3539 WMG 3640 WMG 3741 WMG 4044 Larger plain sizes available data upon request Bore Outside Length (L) 1 3 02 2 3 03 2.5 4 05 3 4 03 05 06 4 5 04 06 4.5 6 08 4 7 05 5 6 05 07 5 7 05 08 10 6 7 06 17.5 6 8 04 05 05.5 06 08 09 10 11 13 15 25 7 8 10 19 7 9 08 09 10 8 9 05 06 08 8 10 05 06 07 08 10 13 15 16 22 9 11 06 10 11 06 10 25 10 04 04.5 05 06 07 08 09 10 14 15 17 13 15 14 04 05 06 08 10 14 15 25 15 06 22 16 10 13 15 070 075 13 15 10 15 25 14 16 03 06 08 10 15 25 15 16 15 15 17 04 10 15 25 16 05.5 08 10 13.5 15 25 30 10 15 25 45 19 22 06 28 35 21 22 15 22 30 23 10 15 23 24 25 30 22 24 10 15 17 30 22 25 15 25 30 24 27 06 15 25 30 25 26 25 25 28 15 24 25 30 35 26 30 16 27 30 05 28 32 10.5 15 23 25 30 30 31 30 30 34 15 24 25 30 35 40 52.5 32 36 30 40 35 39 14 25 30 40 36 40 37 41 40 44 10 16 30 40 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances. Plastic

WMFG Flanged Plastic Bearings Reference WMFG 0304 WMFG 0405 WMFG 040 WMFG 0408 WMFG 06 WMFG 07 WMFG 0709 WMFG 0715 WMFG 0607 WMFG 0607 WMFG 0607 WMFG 0608 WMFG 060814 WMFG 0708 WMFG 0709 WMFG 070919 WMFG 0809 WMFG 0810 WMFG 0810 WMFG 081013 WMFG 081014 WMFG 081016 WMFG 081017 WMFG 0910 WMFG 1011 WMFG 10 WMFG 1014 WMFG 1016 WMFG 13 WMFG 14 WMFG 14 WMFG 1315 WMFG 1416 WMFG 1516 WMFG 1517 WMFG 1524 WMFG 16 WMFG 1719 WMFG WMFG 22 WMFG 22 WMFG 21 WMFG 23 WMFG 2326 WMFG 2328 WMFG 222535 WMFG 2427 WMFG 2526 WMFG 2527 WMFG 2528 WMFG 2830 WMFG 2830 WMFG 283239 WMFG 3032 WMFG 3034 WMFG 3236 WMFG 3438 WMFG 3539 WMFG 3842 WMFG 4044 Outside Flange Outside Flange Bore Length (L) diameter Thickness 3 4 02 0275 03 05 7 0.75 4 5 03 04 06 0.75 4 5 04 06 0.75 4 5 10 8 1 5 6 035 04 05 06 15 10 0.5 5 7 03 04 05 30 11 1 5 7 05 1 5 7 04 15 1 6 7 024 11 0.5 6 7 045 06 10 11 0.5 6 7 06 10 11 0.5 6 8 025 04 048 05 06 07 08 10 25 35 1 6 8 028 14 1 7 8 03 08 0.5 7 9 06 10 15 1 7 9 10 19 1 8 9 03 055 08 15 0.5 8 10 03 04 0 065 07 09 10 15 25 30 15 1 8 10 5 1 8 10 8 13 1 8 10 06 08 10 14 1 8 10 11 155 16 1.5 8 10 15 17 1 9 10 065 17 15 0.5 10 11 026 044 10 15 0.5 10 035 04 05 06 07 09 10 15 17 1 10 07 14 1 10 06 09 15 16 1 13 03 17 0.5 14 03 06 07 09 10 11 15 17 24 1 14 04 08 10 15 1 13 15 06 22 1 14 16 03 04 06 08 10 17 21 22 1 15 16 02 025 03 15 0.5 15 17 04 045 05 09 17 23 1 15 32 24 1.5 16 04 06 09 17 21 24 1 17 19 09 25 25 1 04 06 09 11 17 22 30 32 26 1 6 22 1 22 28 26 2 21 25 0.5 23 07 11 16 21 30 1.5 23 21.5 26 1.5 23 15 28 1.5 22 25 315 35 1.5 24 27 07 10 32 1.5 25 26 25 30 0.5 25 27 48 32 1 25 28 11 16 21 35 1.5 28 28 28 30 30 32 10 36 35 36 39 1 1 2 30 32 04 17 22 37 1 30 34 09 16 26 37 42 2 32 36 16 26 40 2 34 38 35 2 35 39 058 07 16 26 36 47 2 38 42 22 54 2 40 44 07 14 30 40 52 2 Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

WMWG Thrust Washers (Metric) Reference WMWG 09 -T WMWG 0615 -T WMWG 06 -T WMWG 0713 -T WMWG 0815 -T WMWG 08 -T WMWG 09 -T WMWG 10 -T WMWG 24 -T WMWG 14 -T WMWG 1426 -T WMWG 1522 -T WMWG 1524 -T WMWG 1630 -T WMWG 32-T WMWG 36-T WMWG 2238-T WMWG 2442-T WMWG 2644-T WMWG 2835-T WMWG 2848-T WMWG 3254-T WMWG 3862-T WMWG 4266-T WMWG 4874-T WMWG 5278-T WMWG 6290-T WMWG 6881-T Bore Outside Washer Thickness (T) Location hole diameter (mm) 5 9 0.6 no location hole 6 15 1.5 no location hole 6 1.5 1.5 7 13 0.5 no location hole 8 15 0.5 (1.5 *) 1.5 8 0.5 (1.5 *) 1.5 9 1.5 1.5 10 1.0 2.0 no location hole 24 1.5 1.5 14 1.5 no location hole 14 26 1.5 2 15 22 0.8 no location hole 15 24 (1.5 *) 2.75 1.5 16 30 1.5 2 32 1.5 2 36 1.5 3 22 38 1.5 3 24 42 1.5 3 26 44 1.5 3 28 35 0.5 no location hole 28 48 1.5 4 32 54 1.5 4 38 62 1.5 4 42 66 1.5 4 48 74 2.0 4 52 78 2.0 4 62 90 2.0 4 68 81 2.0 no location hole * denotes location hole is only standard in this washer thickness Minimum order quantitys and production lead times may apply to certain sizes Non-standard sizes can be supplied. If the size you require is not listed please contact our sales dept. We also offer a specialised machining service for low volume non-standard sizes and tolerances.

TWP Range of Acetal Copolymer Thrust Washers Good sliding properties Good temperature range Lightweight No maintenance Physiologically inert Good chemical resistance (4<pH<13) Excellent resilience Ideal for food industry Very good dimensional stability High impact strength Other Plastic Materials Available to Special Order

Material Properties Acetal Copolymer (POM C) Acetal Copolymer has a good combination of properties, including low moisture absorption, good dimensional stability, and low friction, making it suitable for Bearing applications. Technical Specification Property ASTM Units ACETAL Methods Copolymer Colour - - White Specific Gravity D792-1.41 Water Absorption Saturation in water - % 0.85 Tensile Strength D638 N/mm 2 70 Tensile Modulus D638 N/mm 2 3000 Elongation D638 % 30 Flexural Strength D790 N/mm 2 - Flexural Modulus D790 N/mm 2 - Impact - Izod Notched D256 J/m 80 Hardness Rockwell - M86 Shore D - - Melt Point D2117 C 165 Max allowable service temp in air for short periods - C 140 continuously for,000hrs - C 100 Linear thermal expansion coefficient D696 K -1 x10-5.5 Thermal Conductivity C117 W/K.m 0.31 Flammability UL - HB Volume Resistivity D257 Ohm.cm 10 14 Dielectric Stength D149 kv/mm Coefficient of friction (dryvs steel) dynamic µ 0.25-0.30 Limiting PV (V= 0.1 m/s) unlubricated N/mm 2 m/s 0.16 (V= 1.0 m/s) unlubricated N/mm 2 m/s 0.10 continuously lubricated N/mm 2 m/s 0. Maximum long term static load N/mm 2 22 Maximum velocity (sliding dry) m/s 2 Outside applications - UV resistance - - C/B Acids - Strong (ph <3) - - C Alkalis - Strong (ph >11) - - A Chlorinated Hydrocarbons - - A/B Hot Water - - A A - No attack; B - Mild attack by absorption; C - Dimensional change due to absorption, D - Decomposition in short time. This data gives typical values and are not intended to represent specification. Their aim is to guide the user towards a material choice. The warranties given by Bowman International Ltd ( Bowman ) are as set out in their Conditions of Business, subject to which the products referred to in this brochure are offered. Copies of our conditions are available on request. The suitability of the proposed use of any of the products for any particular purpose is the responsibility of the customer. Metric Stock Sizes DIM A DIM B DIM C PART No. 10.7 24 1.5 TWP 24.7 26 1.5 TWP 26 16.7 30 1.5 TWP 30 16.7 32 1.5 TWP 32.7 36 1.5 TWP 36.7 38 1.5 TWP 38 24.7 42 1.5 TWP 42 24.7 44 1.5 TWP 44 25.7 48 1.5 TWP 48 28.7 48 1.5 TWP 48-A 30.7 54 1.5 TWP 54 36.2 62 1.5 TWP 62 41.2 66 1.5 TWP 66 46.2 74 2 TWP 74 51.2 78 2 TWP 78 Metric Stock Sizes DIM A DIM B DIM C PART No. 1.5 TWP -1 24 1.5 TWP 24-1 14 26 1.5 TWP 26-1 16 30 1.5 TWP 30-1 32 1.5 TWP 32-1 36 1.5 TWP 36-1 22 38 1.5 TWP 38-1 24 42 1.5 TWP 42-1 26 44 1.5 TWP 44-1 28 48 1.5 TWP 48-1 32 54 1.5 TWP 54-1 38 62 1.5 TWP 62-1 42 66 1.5 TWP 66-1 48 74 2 TWP 74-1 52 78 2 TWP 78-1 Inch and special sizes can be produced promptly to order. Bowman International Limited reserve the right to change specifications without prior notice E & OE Acetal Copolymer

Ball Bearings Ranges Metric, Imperial and specials. Types Plain and Flanged Protection Two Shields and Two Seals. Material SAE 52100 High Carbon Chrome Steel Precision Level Commercial, ABEC 1, ABEC 3 are available from stock Radial Internal Clearance d (mm) CN C3 Over Up to Min. Max. Min. Max. 2.5 6 2 13 8 23 6 10 2 13 8 23 10 3 11 25 24 5 13 28 24 30 5 13 28 30 40 6 15 33 40 6 23 36 65 8 28 23 43 65 80 10 30 25 51 80 100 36 30 58 100 1 15 41 36 66 For non catalogue items we are able to offer a wide range of material, precision and configuration options to order.

B r OPEN ONE SHIELD SNAP RING GROOVE r D d ONE SEAL Z TWO SEALS NR TWO SHIELDS RS 2RS ZZ Ball Bearings 6000 Series Nominal Dimensions Basic load ratings Limiting speeds Bearing d D B Dynamic Static Grease Oil Number (mm) (N) (RPM) WM 6000* 10 26 8 46 1960 30000 36000 WM 6001* 28 8 70 2360 26000 300 WM 6002* 15 32 9 5590 28 200 28000 WM 6003* 17 35 10 60 32 19000 24000 WM 6004* 42 9360 00 17000 000 WM 6005* 25 47 110 65 100 000 WM 6006* 30 55 13 13300 8300 100 100 WM 6007* 35 62 14 15900 100 10000 13000 WM 6008* 40 68 15 16800 11600 90 100 WM 6009* 45 75 16 800 14600 9000 11000 WM 6010* 80 16 21600 16000 80 10000 WM 6011* 55 90 28100 210 70 9000 WM 60 60 95 29600 230 6700 8000 WM 6013 65 100 30700 200 6300 70 WM 6014 70 110 37700 31000 6000 7000 WM 6015 75 115 39700 330 5600 6700 WM 6016 80 5 22 470 40000 5300 6300 WM 6017 85 130 22 49400 43000 00 6000 WM 60 90 140 24 580 000 4800 5600 WM 6019 95 145 24 600 54000 40 5300 WM 60 100 1 24 600 54000 4300 00 *These bearings are also available in 440 c stainless steel. Ball Bearings

B r OPEN ONE SHIELD SNAP RING GROOVE r D d ONE SEAL Z TWO SEALS NR TWO SHIELDS RS 2RS ZZ Ball Bearings 60 Series Nominal Dimensions Basic load ratings Limiting speeds Bearing d D B Dynamic Static Grease Oil Number (mm) (N) (RPM) WM 60* 10 30 9 70 2360 24000 30000 WM 61* 32 10 6890 3100 200 28000 WM 62* 15 35 11 7800 37 19000 24000 WM 63* 17 40 9560 47 17000 000 WM 64* 47 14 700 65 100 000 WM 65* 25 52 15 14000 7800 100 100 WM 66* 30 62 16 190 110 10000 13000 WM 67* 35 72 17 250 15300 9000 11000 WM 68* 40 80 30700 19000 80 10000 WM 69* 45 85 19 330 21600 70 9000 WM 6210* 90 35100 230 7000 80 WM 6211* 55 100 21 43600 29000 6300 70 WM 62 60 110 22 470 320 6000 7000 WM 6213 65 1 23 55900 400 5300 6300 WM 6214 70 5 24 600 400 00 6000 WM 6215 75 130 25 66300 49000 4800 5600 WM 6216 80 140 26 700 500 40 5300 WM 6217 85 1 28 830 64000 4300 00 WM 62 90 160 30 95600 730 3800 40 WM 6219 95 170 32 10800 810 3600 4300 WM 62 100 0 34 4000 93000 3400 4000 *These bearings are also available in 440 c stainless steel. Ball Bearings 6300 Series Nominal Dimensions Basic load ratings Limiting speeds Bearing d D B Dynamic Static Grease Oil Number (mm) (N) (RPM) WM 6300* 10 35 11 8060 3400 000 26000 WM 6301* 37 97 41 19000 24000 WM 6302* 15 42 13 11400 5400 17000 000 WM 6303* 17 47 14 130 65 16000 19000 WM 6304* 52 15 15900 7800 13000 16000 WM 6305* 25 62 17 220 11600 11000 14000 WM 6306* 30 72 19 28100 16000 9000 11000 WM 6307* 35 80 21 330 19000 80 10000 WM 6308* 40 90 23 41000 24000 70 9000 WM 6309* 45 100 25 52700 310 6700 8000 WM 6310* 110 27 600 38000 6300 70 WM 6311* 55 1 29 710 400 5600 6700 WM 63 60 130 31 81900 0 00 6000 WM 6313 65 140 33 92300 60000 4800 5600 WM 6314 70 1 35 104000 68000 40 5300 WM 6315 75 160 37 114000 760 4300 00 *These bearings are also available in 440 c stainless steel. Bowman International Limited reserve the right to change specifications without prior notice E & OE

B r B Bf ONE OPEN SHIELD TWO ONE SHIELDS r D d D d Df Z ONE SEAL ZZZ TWO SEALS RS 2RS Metric Miniature Bearings Nominal Dimensions Basic load Flange Flange Width Weight d D B Dynamic Static Bf Bearing Open Sealed Df Open Sealed Open Sealed Number (mm) (N) (mm) (mm) (g) WM 682 2 5 1.5 2.3 169 6.1 0.5 0.6 0.15 0. WM MR52 2 5 2.0 2.5 169 6.2 0.6 0.6 0.14 0. WM 692 2 6 2.3 3.0 330 99 7.5 0.6 0.8 0.28 0.35 WM MR62 2 6 2.5 2.5 330 99 7.2 0.6 0.6 0.28 0.33 WM MR72 2 7 2.5 3.0 386 9 8.2 0.6 0.6 0.43 0.53 WM 602 2 7 2.8 3.5 386 9 8.5 0.7 0.9 0. 0.60 WM MR63 3 6 2.0 2.5 9 74 7.2 0.6 0.6 0. 0.28 WM 683 3 7 2.0 3.0 311 1 8.1 0.5 0.8 0.32 0.45 WM MR83 3 8 2.5 3.0 395 141 9.2 0.6 0.6 0.51 0.67 WM 693 3 8 3.0 4.0 558 0 0.7 0.9 0.60 0.80 WM MR93 3 9 2.5 4.0 571 9 10.2 0.6 0.8 0.75 1.30 WM 603 3 9 3.0 5.0 571 9 10.5 0.7 1.0 0.84 1.43 WM 623 3 10 4.0 4.0 631 219 11.5 1.0 1.0 1.45 1.65 WM 633 3 13 5.0 5.0 1301 488 15.0 1.0 1.0 3.27 3.43 WM MR74 4 7 2.0 2.5 311 115 8.2 0.6 0.6 0.23 0.33 WM MR84 4 8 2.0 3.0 395 141 9.2 0.6 0.6 0.39 0.56 WM 684 4 9 2.5 4.0 641 227 10.3 0.6 1.0 0.65 1.00 WM MR104 4 10 3.0 4.0 711 272 11.2 0.6 0.8 0.96 1.33 WM 694 4 11 4.0 4.0 957 3.5 1.0 1.0 1.69 1.75 WM 604 4 4.0 4.0 957 3 13.5 1.0 1.0 2.19 2.34 WM 624 4 13 5.0 6.0 1301 488 15.0 1.0 1.0 3.10 3. WM 634 4 16 5.0 6.0 1340 523.0 1.0 1.0 5.24 5.44 WM MR85 5 8 2.0 2.5 308 1 9.2 0.6 0.6 0.25 0.34 WM MR95 5 9 2.5 3.0 431 169 10.2 0.6 0.6 0.54 0.58 WM MR105 5 10 3.0 4.0 431 169 11.2 0.6 0.8 0.91 1.26 MR115 5 11 4.0 716 282.6 0.8 0.62 WM 685 5 11 3.0 5.0 716 282.5 0.8 1.0 1.16 1.93 WM 695 5 13 4.0 4.0 1077 432 15.0 1.0 1.0 2.39 2.31 WM 605 5 14 5.0 5.0 329 7 16.0 1.0 1.0 3.46 3.75 WM 625 5 16 5.0 5.0 1729 675.0 1.0 1.0 4.95 5.10 WM 635 5 19 5.0 5.0 2336 896 22.0 1.5 1.5 8. 8.89 All bearings are also available in 440 c stainless steel. All bearings are also available with ceramic balls.

B r B Bf ONE OPEN SHIELD TWO ONE SHIELDS r D d D d Df Z ONE SEAL ZZZ TWO SEALS RS 2RS Metric Miniature Bearings Nominal Dimensions Basic load Flange Flange Width Weight d D B Dynamic Static Bf Bearing Open Sealed Df Open Sealed Open Sealed Number (mm) (N) (mm) (mm) (g) WM MR106 6 10 2.5 3.0 496 2 11.2 0.6 0.6 0.55 0.70 WM MR6 6 3.0 4.0 714 295 13.2 0.6 0.8 1.25 1.66 WM 686 6 13 3.5 5.0 1082 442 15.0 1.0 1.1 1.87 2.68 WM 696 6 15 5.0 5.0 1340 523 17.0 1.2 1.2 3.85 3.65 WM 606 6 17 6.0 6.0 2263 846 19.0 1.2 1.2 5.94 6.89 WM 626 6 19 6.0 6.0 2336 896 22.0 1.5 1.5 8. 8.65 WM 636 6 22 7.0 7.0 3333 1423 25.0 1.5 1.5 13.90 14. WM MR117 7 11 2.5 3.0 455 2.2 0.6 0.6 0.59 0.71 WM MR137 7 13 3.0 4.0 541 276 14.2 0.6 0.8 1.52 2.01 WM 687 7 14 3.5 5.0 1173 613 16.0 1.0 1.1 2.03 2.95 WM 697 7 17 5.0 5.0 1605 719 19.0 1.2 1.2 5.26 6.01 WM 607 7 19 6.0 6.0 2336 896 22.0 1.5 1.5 7.80 8.24 WM 627 7 22 7.0 7.0 3287 1379 25.0 1.5 1.5.70 13.10 WM 637 7 26 9.0 9.0 4563 1983 29.0 2.0 2.0 24. 25.80 WM MR8 8 2.5 3.5 543 274 13.2 0.6 0.8 0.70 0.99 WM MR148 8 14 3.5 4.0 817 386 15.6 0.8 0.8 1.90 2.19 WM 688 8 16 4.0 5.0 52 592.0 1.0 1.1 3.11 4.05 WM 698 8 19 6.0 6.0 2237 917 22.0 1.5 1.5 7. 7.57 WM 608 8 22 7.0 7.0 3293 1379 25.0 1.5 1.5 11.80.90 WM 628 8 24 8.0 8.0 3333 1423 17.10. WM 638 8 28 9.0 9.0 4563 1983 28.10 30.30 WM 679 9 14 3.0 4.5 919 468 15.5 0.8 0.8 1.35 1.98 WM 689 9 17 4.0 5.0 1327 668 19.0 1.0 1.1 3.41 4.38 WM 699 9 6.0 6.0 2467 1081 23.0 1.5 1.5 8.38 8.54 WM 609 9 24 7.0 7.0 3356 1444 27.0 1.5 1.5 14.70 16.00 WM 629 9 26 8.0 8.0 4575 1983 19.00 21.80 WM 639 9 30 10.0 10.0 4659 80 36. 37.10 All bearings are also available in 440 c stainless steel. All bearings are also available with ceramic balls.

B r B Bf ONE OPEN SHIELD TWO ONE SHIELDS r D d D d Df Z ONE SEAL ZZZ TWO SEALS RS 2RS Imperial Miniature Bearings Nominal Dimensions Basic load Flange Flange Width Weight d D B Dynamic Static Bf Bearing Open Sealed Df Open Sealed Open Sealed Number (mm) (N) (mm) (mm) (g) WM R133 0.0937 0.75 0.0625 0.0937 9 60 0.2340 0.00 0.10 0.15 WM RI.5 0.0937 0.35 0.1094 0.1406 552 176 0.3590 0.0230 0.0310 0.60 1.15 WM R144 0. 0.20 0.0937 0.1094 284 96 0.2960 0.0230 0.0310 0.27 0.40 WM R2.5 0. 0.35 0.1094 0.1406 558 0 0.3590 0.0230 0.0310 0. 0.74 WM R2.6 0. 0.37 0.1094 0.1406 640 227 0.42 0.0230 0.0310 0.96 1.23 WM R2 0. 0.37 0.1562 0.1562 631 219 0.4400 0.0300 0.0300 1.04 1.37 WM R2A 0. 0.00 0.1719 0.1719 640 227 3.30 3.30 WM R155 0.1562 0.35 0.1094 0. 359 1 0.3590 0.0230 0.0360 0.51 0.61 WM R156 0.75 0.35 0.1094 0. 359 1 0.3590 0.0230 0.0360 0.40 0.45 WM R166 0.75 0.37 0. 0. 709 272 0.42 0.0230 0.0310 0.81 0.85 WM R3 0.75 0.00 0.1562 0.1960 1301 488 0.56 0.04 0.04 2.21 2.95 WM R3A 0.75 0.62 0.1960 0.1960 1480 621 4.75 5.08 WM R168 0.20 0.37 0. 0. 373 172 0.42 0.0230 0.0360 0.57 0.60 WM R8 0.20 0.00 0. 0.75 1082 442 0.5470 0.0230 0.04 1.60 2.32 WM R4 0.20 0.62 0.1960 0.1960 1480 621 0.6900 0.04 0.04 4.46 4.54 WM R4A 0.20 0.70 0.28 0.28 2336 896 7.48 10.00 WM R10 0.35 0.00 0.1562 0.1562 542 276 0.5470 0.0310 0.0310 1.39 1.57 WM R6 0.37 0.87 0.28 0.28 3332 1422 0.9690 0.06 0.06 9.02 11.70 WM R8 0.00 1. 0.20 0.35 5108 2413 1.2252 0.06 0.06 11.60 24.10 All bearings are also available in 440 c stainless steel. All bearings are also available with ceramic balls.