BEARINGS Plain Oilite Bushes Oil Impregnated Self-Lubricated - ISO 2795 : Metric Type, 2-12mm Bores

Size: px

Start display at page:

Download "BEARINGS Plain Oilite Bushes Oil Impregnated Self-Lubricated - ISO 2795 : Metric Type, 2-12mm Bores"

Paul Leonard
5 years ago
Views:

QM BEARINGS Plain Oilite Bushes Oil Impregnated Sel-ubricated - ISO 2795 : Metric Type, 2-12mm Bores Bore G7 Sintered oil retaining Tin Bronze. s7 QM3-2 2 5 2 0.3 2.62 QM3-3 2 5 3 0.3 2.62 QM5-3 3 5 3 0.

1 QM BEARINGS Plain Oilite Bushes Oil Impregnated Sel-ubricated - ISO 2795 : Metric Type, 2-12mm Bores Bore G7 Sintered oil retaining Tin Bronze. s7 QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM Perormance Static oad: 50N/mm 2. Dynamic oad: 14N/mm 2. Velocity: 5m/s. Designed to it a H7 housing to run on a Shat. ubrication Standard Oilite bearings are impregnated with a highly reined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust and deoamant additives. Bore G7 s7 QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM Features Provides a good balance between strength, wear resistance, conormability and durability in operation. Ideal in a variety o applications where 'sel-lubricating' properties are required over a long period o time. Other Ino. 45 chamers are incorporated on inside and outside diameters at each end o the bush. Chamer length varies with bush wall thickness and outside diameter. Additional sizes available on request, P.O.A. Also available in German and French standards. Also available in a range o other orms: thrust washers, solid bar, cored bar, plates, bearing plates and spherical bearings. Please contact Sales or urther details.

2 Plain Oilite Bushes Oil Impregnated Sel-ubricated - ISO 2795 : Metric Type, 14-60mm Bores QM Bore G7 s7 QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM Bore G7 s7 QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM QM * 51** QM * 51** QM * 51** QM * 55** QM * 55** QM * 55** QM * 60** QM * 60** QM * 60** QM * 60** QM * 68** QM * 68** QM * 72** QM * 72** QM * 72** * G8 Tolerance ** s8 Tolerance

3 QT BEARINGS Plain Oilite Bushes Oil Impregnated Sel-ubricated : Inch Type, " " Bores Bore QT /16" (0.1875") 5/16" (0.3125") 1/4" (0.250") 1.85 QT /16" (0.1875") 5/16" (0.3125") 3/8" (0.375") 1.85 QT /16" (0.1875") 5/16" (0.3125") 1/2" (0.500") 1.85 QT /16" (0.1875") 5/16" (0.3125") 5/8" (0.625") 1.85 QT /16" (0.1875") 5/16" (0.3125") 3/4" (0.750") 1.85 QT /4" (0.2500") 3/8" (0.3750") 1/4" (0.250") 2.03 QT /4" (0.2500") 3/8" (0.3750") 3/8" (0.375") 2.03 QT /4" (0.2500") 3/8" (0.3750") 1/2" (0.500") 2.03 QT /4" (0.2500") 3/8" (0.3750") 5/8" (0.625") 2.58 QT /4" (0.2500") 3/8" (0.3750") 3/4" (0.750") 2.58 QT /16" (0.3125") 1/2" (0.5000") 1/4" (0.250") 2.68 QT /16" (0.3125") 1/2" (0.5000") 3/8" (0.375") 2.68 QT /16" (0.3125") 1/2" (0.5000") 1/2" (0.500") 3.55 QT /16" (0.3125") 1/2" (0.5000") 5/8" (0.625") 3.55 QT /16" (0.3125") 1/2" (0.5000") 3/4" (0.750") 3.55 QT4-1 3/8" (0.3750") 1/2" (0.5000") 3/8" (0.375") 2.08 QT4-2 3/8" (0.3750") 1/2" (0.5000") 1/2" (0.500") 2.08 QT4-3 3/8" (0.3750") 1/2" (0.5000") 5/8" (0.625") 2.68 QT4-4 3/8" (0.3750") 1/2" (0.5000") 3/4" (0.750") 2.68 QT4-5 3/8" (0.3750") 1/2" (0.5000") 7/8" (0.875") 3.10 QT4-6 3/8" (0.3750") 1/2" (0.5000") 1" (1.000") 3.10 QT /16" (0.4375") 9/16" (0.5625") 3/8" (0.375") 2.22 QT /16" (0.4375") 9/16" (0.5625") 1/2" (0.500") 2.22 QT /16" (0.4375") 9/16" (0.5625") 5/8" (0.625") 2.73 QT /16" (0.4375") 9/16" (0.5625") 3/4" (0.750") 2.73 QT51-1 1/2" (0.5000") 5/8" (0.6250") 1/2" (0.500") 2.32 QT51-2 1/2" (0.5000") 5/8" (0.6250") 5/8" (0.625") 2.88 QT51-3 1/2" (0.5000") 5/8" (0.6250") 3/4" (0.750") 2.88 QT51-4 1/2" (0.5000") 5/8" (0.6250") 7/8" (0.875") 3.36 QT51-5 1/2" (0.5000") 5/8" (0.6250") 1" (1.000") 3.36 QT /16" (0.5625") 11/16" (0.6875") 1/2" (0.500") 3.32 QT /16" (0.5625") 11/16" (0.6875") 3/4" (0.750") 3.98 QT /8" (0.6250") 3/4" (0.7500") 1/2" (0.500") 2.62 QT /8" (0.6250") 3/4" (0.7500") 5/8" (0.625") 3.19 QT /8" (0.6250") 3/4" (0.7500") 3/4" (0.750") 3.19 QT /8" (0.6250") 3/4" (0.7500") 7/8" (0.875") 3.80 QT /8" (0.6250") 3/4" (0.7500") 1" (1.000") 3.80 Sintered oil retaining Tin Bronze. Tolerances 1 1/2" ±0.005", > 1 1/2" 3" = ±0.010", Perormance Static oad: 50N/mm 2. Dynamic oad: 14N/mm 2. Velocity: 5m/s. Designed to it a H7 housing to run on a Shat. ubrication Standard Oilite bearings are impregnated with a highly reined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust and deoamant additives.

4 Plain Oilite Bushes Oil Impregnated Sel-ubricated : Inch Type, 0.625" " Bores QT Bore QT14-1 5/8" (0.625") 7/8" (0.875") 3/4" (0.750") 5.32 QT14-2 5/8" (0.625") 7/8" (0.875") 7/8" (0.875") 6.57 QT14-3 5/8" (0.625") 7/8" (0.875") 1" (1.000") 6.57 QT14-4 5/8" (0.625") 7/8" (0.875") 1 1/4" (1.250") 7.81 QT15-1 3/4" (0.750") 7/8" (0.875") 1/2" (0.500") 4.58 QT15-2 3/4" (0.750") 7/8" (0.875") 5/8" (0.625") 3.75 QT15-3 3/4" (0.750") 7/8" (0.875") 3/4" (0.750") 3.75 QT15-5 3/4" (0.750") 7/8" (0.875") 1" (1.000") 4.42 QT15-6 3/4" (0.750") 7/8" (0.875") 1 1/4" (1.250") 4.86 QT18-1 3/4" (0.750") 1" (1.000") 5/8" (0.625") 5.70 QT18-2 3/4" (0.750") 1" (1.000") 3/4" (0.750") 5.70 QT18-3 3/4" (0.750") 1" (1.000") 7/8" (0.875") 7.05 QT18-4 3/4" (0.750") 1" (1.000") 1" (1.000") 7.05 QT18-5 3/4" (0.750") 1" (1.000") 1 1/4" (1.250") 8.56 QT69-1 7/8" (0.875") 1" (1.000") 3/4" (0.750") 4.14 QT69-2 7/8" (0.875") 1" (1.000") 1" (1.000") 4.70 QT69-3 7/8" (0.875") 1" (1.000") 1 1/4" (1.250") 5.41 QT69-4 7/8" (0.875") 1" (1.000") 1 1/2" (1.500") 6.37 QT71-1 7/8" (0.875") 1 1/8" (1.125") 3/4" (0.750") 6.57 QT71-2 7/8" (0.875") 1 1/8" (1.125") 7/8" (0.875") 8.61 QT71-3 7/8" (0.875") 1 1/8" (1.125") 1" (1.000") 7.48 QT71-4 7/8" (0.875") 1 1/8" (1.125") 1 1/4" (1.250") 9.88 QT71-5 7/8" (0.875") 1 1/8" (1.125") 1 1/2" (1.500") QT " (1.000") 1 1/8" (1.125") 3/4" (0.750") 4.47 QT " (1.000") 1 1/8" (1.125") 1" (1.000") 5.14 QT " (1.000") 1 1/8" (1.125") 1 1/4" (1.250") 5.99 QT " (1.000") 1 1/8" (1.125") 1 1/2" (1.500") 6.66 QT " (1.000") 1 1/4" (1.250") 3/4" (0.750") 7.31 QT " (1.000") 1 1/4" (1.250") 7/8" (0.875") 9.20 QT " (1.000") 1 1/4" (1.250") 1" (1.000") 9.20 QT " (1.000") 1 1/4" (1.250") 1 1/8" (1.125") QT " (1.000") 1 1/4" (1.250") 1 1/4" (1.250") QT " (1.000") 1 1/4" (1.250") 1 3/8" (1.375") QT " (1.000") 1 1/4" (1.250") 1 1/2" (1.500") QT " (1.000") 1 1/4" (1.250") 1 5/8" (1.625") QT " (1.000") 1 1/4" (1.250") 1 3/4" (1.750") QT " (1.000") 1 1/4" (1.250") 2" (2.000") Features Provides a good balance between strength, wear resistance, conormability and durability in operation. Ideal in a variety o applications where 'sel-lubricating' properties are required over a long period o time. Other Ino. 45 chamers are incorporated on inside and outside diameters at each end o the bush. Chamer length varies with bush wall thickness and outside diameter. Additional sizes available on request, P.O.A. Also available in German and French standards. Also available in a range o other orms: thrust washers, solid bar, cored bar, plates, bearing plates and spherical bearings. Please contact Sales or urther details.

5 QFM BEARINGS Flanged Oilite Bushes Oil Impregnated Sel-ubricated - ISO 2795 : Metric Type, 2-50mm Bores r M ØF s7 Flange ØF js13 Flange Height M js13 Bore G7 r QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM Sintered oil retaining Tin Bronze. Perormance Static oad: 50N/mm 2. Dynamic oad: 14N/mm 2. Velocity: 5m/s. Designed to it a H7 housing to run on a Shat. ubrication Standard Oilite bearings are impregnated with a highly reined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust and deoamant additives. Features Provides a good balance between strength, wear resistance, conormability and durability in operation. Ideal in a variety o applications where 'sel-lubricating' properties are required over a long period o time. Other Ino. 45 chamers are incorporated on inside and outside diameters at each end o the bush. Chamer length varies with bush wall thickness and outside diameter. Additional sizes available on request, P.O.A. Also available in German and French standards. Also available in a range o other orms: thrust washers, solid bar, cored bar, plates, bearing plates and spherical bearings. Please contact Sales or urther details.

6 Flanged Oilite Bushes Oil Impregnated Sel-ubricated - ISO 2795 : Metric Type, 2-50mm Bores QFM r M ØF s7 Flange ØF js13 Flange Height M js13 Bore G7 r QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM QFM * 32 60** QFM * 40 60** QFM * 50 60** Sintered oil retaining Tin Bronze. Perormance Static oad: 50N/mm 2. Dynamic oad: 14N/mm 2. Velocity: 5m/s. Designed to it a H7 housing to run on a Shat. ubrication Standard Oilite bearings are impregnated with a highly reined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust and deoamant additives. Features * = G8 Tolerance, ** = s8 Tolerance Provides a good balance between strength, wear resistance, conormability and durability in operation. Ideal in a variety o applications where 'sel-lubricating' properties are required over a long period o time. Other Ino. 45 chamers are incorporated on inside and outside diameters at each end o the bush. Chamer length varies with bush wall thickness and outside diameter. Additional sizes available on request, P.O.A. Also available in German and French standards. Also available in a range o other orms: thrust washers, solid bar, cored bar, plates, bearing plates and spherical bearings. Please contact Sales or urther details.

QF BEARINGS Flanged Oilite Bushes Oil Impregnated Sel-ubricated : Inch Type, 0.1875" - 1.000" Bores M ØF Bore Flange ØF Flange Height M QF394-1 3/16" (0.1875") 1/4" (0.250") 5/16" (0.3125") 3/8" (0.

7 QF BEARINGS Flanged Oilite Bushes Oil Impregnated Sel-ubricated : Inch Type, " " Bores M ØF Bore Flange ØF Flange Height M QF /16" (0.1875") 1/4" (0.250") 5/16" (0.3125") 3/8" (0.375") 0.062" 3.57 QF /16" (0.1875") 3/8" (0.375") 5/16" (0.3125") 3/8" (0.375") 0.062" 1.72 QF /16" (0.1875") 1/2" (0.500") 5/16" (0.3125") 3/8" (0.375") 0.062" 4.03 QF /4" (0.2500") 1/4" (0.250") 3/8" (0.3750") 1/2" (0.500") 0.062" 3.57 QF /4" (0.2500") 3/8" (0.375") 3/8" (0.3750") 1/2" (0.500") 0.062" 1.91 QF /4" (0.2500") 1/2" (0.500") 3/8" (0.3750") 1/2" (0.500") 0.062" 1.91 QF /4" (0.2500") 3/4" (0.750") 3/8" (0.3750") 1/2" (0.500") 0.062" 4.86 QF /16" (0.3125") 1/4" (0.250") 1/2" (0.5000") 5/8" (0.625") 0.062" 4.10 QF /16" (0.3125") 3/8" (0.375") 1/2" (0.5000") 5/8" (0.625") 0.062" 2.68 QF /16" (0.3125") 1/2" (0.500") 1/2" (0.5000") 5/8" (0.625") 0.062" 2.68 QF /16" (0.3125") 3/4" (0.750") 1/2" (0.5000") 5/8" (0.625") 0.062" 5.25 QF59-1 3/8" (0.3750") 1/2" (0.500") 1/2" (0.5000") 5/8" (0.625") 0.140" 4.42 QF59-3 3/8" (0.3750") 7/8" (0.875") 1/2" (0.5000") 5/8" (0.625") 0.140" 7.10 QF /8" (0.3750") 3/8" (0.375") 5/8" (0.6250") 3/4" (0.750") 0.125" 3.57 QF /8" (0.3750") 1/2" (0.500") 5/8" (0.6250") 3/4" (0.750") 0.125" 3.57 QF /8" (0.3750") 5/8" (0.625") 5/8" (0.6250") 3/4" (0.750") 0.125" 3.57 QF /8" (0.3750") 3/4" (0.750") 5/8" (0.6250") 3/4" (0.750") 0.125" 3.57 QF73-1 1/2" (0.5000") 1/2" (0.500") 5/8" (0.6250") 3/4" (0.750") 0.098" 4.90 QF73-2 1/2" (0.5000") 1" (1.000") 5/8" (0.6250") 3/4" (0.750") 0.098" 7.86 QF /2" (0.5000") 1/2" (0.500") 3/4" (0.7500") 1" (1.000") 0.125" 4.65 QF /2" (0.5000") 3/4" (0.750") 3/4" (0.7500") 1" (1.000") 0.125" 4.65 QF /2" (0.5000") 1" (1.000") 3/4" (0.7500") 1" (1.000") 0.125" 5.46 QF29-1 5/8" (0.6250") 1/2" (0.500") 3/4" (0.7500") 1 1/8" (1.125") 0.094" 5.03 QF29-2 5/8" (0.6250") 1" (1.000") 3/4" (0.7500") 1 1/8" (1.125") 0.094" 8.14 QF /8" (0.6250") 1/2" (0.500") 7/8" (0.8750") 1 1/4" (1.250") 0.125" 4.98 QF /8" (0.6250") 3/4" (0.750") 7/8" (0.8750") 1 1/4" (1.250") 0.125" 8.56 QF /8" (0.6250") 1" (1.000") 7/8" (0.8750") 1 1/4" (1.250") 0.125" 6.43 QF /4" (0.7500") 3/4" (0.750") 1" (1.0000") 1 3/8" (1.375") 0.125" 6.13 QF /4" (0.7500") 1" (1.000") 1" (1.0000") 1 3/8" (1.375") 0.125" 7.25 QF /4" (0.7500") 1 1/4" (1.250") 1" (1.0000") 1 3/8" (1.375") 0.125" 9.29 QF /8" (0.8750") 3/4" (0.750") 1 1/8" (1.1250") 1 5/8" (1.625") 0.125" 6.47 QF /8" (0.8750") 1" (1.000") 1 1/8" (1.1250") 1 5/8" (1.625") 0.125" 7.59 QF /8" (0.8750") 1 1/4" (1.250") 1 1/8" (1.1250") 1 5/8" (1.625") 0.125" 9.11 QF /8" (0.8750") 1 1/2" (1.500") 1 1/8" (1.1250") 1 5/8" (1.625") 0.125" QF2-2 1" (1.0000") 1" (1.000") 1 1/4" (1.2500") 1 1/2" (1.500") 0.125" QF2-3 1" (1.0000") 1 1/2" (1.500") 1 1/4" (1.2500") 1 1/2" (1.500") 0.125" Sintered oil retaining Tin Bronze. Tolerances 1.1/2" = ±0.005", >1.1/2" 3" = ±0.010". M = ±0.003". ØF = ±0.005". <1/2" = 0.002" (), > 1/2" <1.1/2" = 0.003" (), >1.1/2" = 0.004" (). Perormance Static oad: 50N/mm 2. Dynamic oad: 14N/mm 2. Velocity: 5m/s. Designed to it a H7 housing to run on a Shat. Features As previously. ubrication Standard Oilite bearings are impregnated with a highly reined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust and deoamant additives. Other Ino. 45 chamers are incorporated on inside and outside diameters at each end o the bush. Chamer length varies with bush wall thickness and outside diameter. Additional sizes available on request, P.O.A. Also available in German and French standards. Also available in a range o other orms: thrust washers, solid bar, cored bar, plates, bearing plates and spherical bearings. Please contact Sales or urther details.

8 Oilite Bushes Tolerances METRIC STOCK TOERANCES Plain Bushes: is js13. Concentricity : Full indicated movement. D with respect to d: D <= 50mm, IT9 : D> 50mm, IT10. Flanged Bushes: is js13. Flange Thickness: e is js13. Flange Diameter: D is js13. Concentricity: Full indicated movement. D with respect to d : D<=50mm, IT9 D> 50mm, IT10. Chamers: 45 chamers are incorporated on inside and outside diameters at each end o the bush. Chamer length varies with bush wall thickness and outside diameter. CAUTION: IN THE E.C. THERE ARE AT EAST THREE STANDARDS COVERING DIMENSIONS AND TOERANCES OF METRIC BUSHES. All the metric (ISO) bushes in this catalogue are manuactured to the tolerances set out in ISO plain bushes rom sintered material. ISO 2795 is the standard used by the BSI or this type o bearing; it is also widely used in other European countries. Bushes conorming to other metric standards used in the E.C. are available in Britain; bushes made to these other standards may not suit the ISO 2795 itting requirements and vice versa. Incompatibility may result in bearing seizure or much reduced lie, thereore great care must be taken in selecting matched bearing, housing, itting-pin and shat sizes. We can supply bushes to meet other standards. Quotes available upon request. ubrication: Standard Oilite bushes are impregnated with highly reined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust and deoamant additives. A replenishment o oil should be carried out ater 1000 hours o use or yearly. These intervals can be extended or bushes with relatively thick walls and shortened or Flanged Bushes - Radii (between outside diameter and lange ace) r Diameter max > > Oilite Bronze MB Grade MB01-1 MB01-2 Grade MB01-1 MB01-2 C Total <0.3% <0.3% P4012Z P4011Z MB01-1: Applicable to bars, cored bars and plate material MB01-2: Applicable to metric bushes. Coeicient o Friction: Bronze on steel = 0.12 Static, 0.06 Dynamic Other bearing materials or special applications are also available. low porosity bushes. Bushes running submerged in oil or in oil-splash will not require replenishment. The standard operating range is -9 C to 70 C. To prevent possible seizures with Stainless Steel or hard-chromium plated shats, an addition o molybdenum disulphide to the impregnation oil must be speciied at extra cost. However, here are some basic rules: 1) ow viscosity oil or low temperatures, high speeds or light loads. 2) High viscosity oil or high temperatures, low speeds or heavy loads. 3) High viscosity index oil or wide variations in operating temperatures. 4) Oxidation stable oils or long-period usage. 5) Oil with oiliness additives or boundary conditions. 6) Oil o lesser oiliness or ull ilm (hydrodynamic) conditions. 7) Oil with Extreme Pressure (E.P.) additives or very heavy or shock loads. Fitting: beore itting make sure that all sharp edges are removed rom the housing and mating shat. The bearing must be ree rom grit and dust. Wash in oil i storage conditions are in doubt and re-oil i held in stock or more than a year or i stored in contact with an absorbent material. Always use steady pressure to insert the bearing. Never use hammer blows. Shats should ideally be hardened to approximately HRC 60 and ground to a surace roughness o Ra=0.25µm. The standard metric range o Oilite bushes to ISO 2795 is made to G7/s7 limits o tolerance. These bushes when itted into a rigid H7 housing, using an m5 itting pin, will give an H7 bore, which when run on an shat will give good perormance. Storage: Oilite bushes can be stored or considerable periods without deterioration or loss o oil i kept in a metal or other nonabsorbent container, at room temperature. Proximity to heat could cause oil loss by sweating, in which case re-oiling is necessary beore itting. Re-oiling: ater machining o the bearing, or ollowing oil loss during storage, immerse in high quality mineral oil to ISO VG 60 or ISO VG 150 (SAE30 or SAE40) at 80 C to 100 C or 10 to 15 minutes and then cool in cold oil. Plain And Flanged Bushes - Tolerances Nominal Standard Sizes Tolerances Up to IT9 IT Over Nearest Equivalent Speciications UK BS5600 France Germany ISO 5755/1 5 NF 150 DIN 1987 Section / M.P.I.F A PART 3 STAND. 35 P4011Z P4011Z FU-E CT-1000-K19 Chemical Composition (4) Cu Balance Balance Sn 9-11% 9-11% 2% 2% FU-E10-64 P Min. 27% 22% Sint A50 Min. 24% 20% CT-1000-K U.S.A. S.A.E Speciications Mechanical & Physical Properties Total (1) (1) (2) Radial (1) Other Open Oil Crushing Density P Elements Porosity Content Strength K Min. Nominal N/mm 2 g/cm 3 Static oad N/mm js13 ±0.070 ±0.090 ±0.110 ±0.135 ±0.165 ±0.195 ±0.230 A.S.T.M. B438 Grd 1 Type 1 B438 Grd 1 Type 2 (3) Pv Factor N/mm 2 x m/s Notes : 1. Density, oil content and open porosity determined according to BS5600 Pt. 3 Section Radial crushing strength according to BS5600 Pt. 3 Section PV actor = Pressure(Nmm 2 ) x bearing surace velocity (m/s) where pressure = load (N) / projected area (d x ) and d = inside diameter (mm). 4. Bars, cored bars and plates may contain up to 1 C. T E C H N I C A

Oilite Bushes Fitting Data or Metric QM & QFM T E C H N I C A ØdF Fitting Pin Fitted Bush R p R s Free Bush (QFM/QM) Shat Chamers are incorporated on inside and outside diameters at each end o the

9 Oilite Bushes Fitting Data or Metric QM & QFM T E C H N I C A ØdF Fitting Pin Fitted Bush R p R s Free Bush (QFM/QM) Shat Chamers are incorporated on inside and outside diameters at each end o the bush. Chamer length varies with bush wall thickness and outside diameter. R Housing Basic Sizes ØdH (H7) p (m5) ØdF (H7) s () Bore Min. Min. Min. Min ØdH Basic Sizes ØdH (H7) p (m5) ØdF (H8) s (8) Bore Ød Min. Min. Min. Min

10 Oilite Bushes Fitting Data or Imperial QT & QF ØdF Fitting Pin Fitted Bush R p R s Free Bush (QF/QT) Shat Basic Sizes ØdH (H8) p Bore Min. Min. Min. 3/16" 5/16" " " " " " 1/4" 3/8" " " " " " 5/16" 1/2" " " " " " 5/16" 9/16" " " " " " 3/8" 1/2" " " " " " 3/8" 1/2" " " " " " 3/8" 9/16" " " " " " 3/8" 5/8" " " " " " 7/16" 9/16" " " " " " 1/2" 5/8" " " " " " 1/2" 3/4" " " " " " 5/8" 3/4" " " " " " 5/8" 7/8" " " " " " 3/4" 1" " " " " " 7/16" 1" " " " " " 7/16" 1 1/8" " " " " " 1" 1 1/4" " " " " " 1" 1 1/4" " " " " " 1 1/8" 1 3/8" " " " " " 1 1/4" 1 1/2" " " " " " 1 1/4" 1 5/8" " " " " " 1 3/8" 1 5/8" " " " " " 1 1/2" 1 3/4" " " " " " 1 1/2" 1 7/8" " " " " " ØdF Tol. Min " H " " H " " H " " " " H " " H " " " " H " " " " J " " H " " " " H " " H " " H " " H " " H " " " " H " " H " " H " " " " F " " H " s " " " " " " " " " " " " " " " " " " " " " " " " Tol. d8 d8 k7 e7 k7 h7 e7 h7 T E C H N I C A Chamers are incorporated on inside and outside diameters at each end o the bush. Chamer length varies with bush wall thickness and outside diameter.

Technical Information Oilite

Technical Information Oilite Technical information - Oilite Lubrication Standard OILITE bearings are impregnated with a highly refined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust