T A B L E O F C O N T E N T S A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S LLF755 - Low Level Flood with Anti-Glare Faceplate C1.1 LLF800 - Low Level Flood with Anti-Glare Faceplate C2.1 LLF850 - Low Level Flood with Open Faceplate C3.1 LLF855 - Low Level Flood with Guard Bars C3.2 - Remote Ballast Information C.5
LLF755 Low Level Flood with Anti-Glare Faceplate Required Wall Recessed Opening: Width: 8 3/4" x Height: 9 5/8" Depth: 4 3/16" Applications: Rectangular recessed wall luminaire with a complete indirect faceplate. Designed to conform with architectural requirements for heavy traffic areas where additional guidance and/or security lighting is required. This unit is suitable for low mounting heights for the illumination of steps, stairways, walkways, aisles, ramps and other indoor and outdoor applications. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish and silicone gasket. Includes an integral wiring compartment. Two (2) 7/8" diameter holes provided for 1/2" trade size conduit. Faceplate: Rectangular anti-glare one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and concealed tempered glass lens. Faceplate is secured to housing by four (4) captive, tamper resistant, stainless steel screws. 2007.4.17 Electrical: Line Voltage Lampholder: Medium Base Incandescent T10 (40W Max.) with high temperature leads (660W, 600V). H.I.D. Lampholder: Porcelain, G12 Base, nickel-plated contacts, 5KV pulse rated with high temperature leads (1000W, 600V). - Metal Halide (MHC): T6 (39W) G12 Base. Ballast: Magnetic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 13 ft. Compact Fluorescent Lampholder (4 Pin): G24q-1 or GX24q-1 (13W), G24q-2 or GX24q-2 (18W), G24q-3 or GX24q-3 (26W)rated 75W, 600V. Ballast: Electronic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 15 ft (1 lamp), 6 ft (2 lamps). Note: Dimming capability for compact fluorescent lamps requires alternate ballast. Please contact your local representative or factory for options. Finish: Powder coat. Standard color in black, white or natural aluminum finish. ORDERING Example : LLF755/PL26/120/B Recessed LLF755 / Lamp / Volt / Lamp Description Lumen Base Bulb Finish Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. ADA compliant and suitable for installation within 4 feet of ground. Compact Fluorescent 13W PL 900 G24q-1 4 Pin PL13 18W PL 1200 G24q-2 4 Pin PL18 26W PL 1710 G24q-3 4 Pin PL26 120 277 RMT B N W Black Natural White High Intensity Discharge 39W MH 3300 G12 T6 MHC39 Incandescent 40W 420 MED T10 INC Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com Product specifications subject to change without notice. : ADA compliant fixture C1.1
LLF800 Low Level Flood with Anti-Glare Faceplate Required Wall Recessed Opening: Width: 11 1/2'' x Height: 13 1/2'' Depth: 4 3/4'' Applications: Rectangular recessed wall luminaire with a complete indirect faceplate. Designed to conform with architectural requirements for heavy traffic areas where additional guidance and/or security lighting is required. This unit is suitable for low mounting heights for the illumination of steps, stairways, walkways, aisles, ramps and other indoor and outdoor applications. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish and silicone gasket. Includes an integral wiring compartment with a semi-specular anodized aluminum reflector. Four (4) threaded hole (3/4-14" NPSM) provided. Faceplate: Rectangular anti-glare one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and concealed tempered glass lens. Faceplate is secured to housing by four (4) captive, tamper resistant, stainless steel screws. ORDERING Example : LLF800/PL13/RMT/W LLF800 / Lamp / Volt / Finish Lamp Description Lumen Base Bulb Compact Fluorescent 9W PL 600 G23 2 Pin PL9 120 B Black 13W PL 900 G24q-1 4 Pin PL13 277 N Natural 18W PL 1200 G24q-2 4 Pin PL18 RMT W White 26W PL 1710 G24q-3 4 Pin PL26 32W PL 2400 GX24q-3 4 Pin PL32 42W PL 3200 GX24q-4 4 Pin PL42 57W PL 4300 GX24q-5 4 Pin PL57 (2) 9W PL 1200 G23 2 Pin PL209 (2) 13W PL 1800 G24q-1 4 Pin PL213 (2) 18W PL 2400 G24q-2 4 Pin PL218 (2) 26W PL 3600 G24q-3 4 Pin PL226 (2) 32W PL 4800 GX24q-3 4 Pin PL232 (2) 42W PL 6400 GX24q-4 4 Pin PL242 High Intensity Discharge 35W HPS 2250 MED B17 HPS35 50W HPS 4000 MED B17 HPS50 70W HPS 6400 MED B17 HPS70 50W MH 3450 MED ED17 MH50 70W MH 5900 MED BD17 MH70 Incandescent INC100 1500 MED A21 INC100 Electrical: Line Voltage Lampholder: Medium Base Incandescent T10 or A21 (100W Max.) with high temperature leads (660W, 600V). H.I.D. Lampholder: Porcelain, medium base, nickel-plated contacts, 4 KV pulse rated with high temperature leads (660W, 600V). - Metal Halide (MH) ED17 (50W), BD17 (70) - High Pressure Sodium (HPS) B17 (35/50W). Ballast: Magnetic, HPF. Available in 120V or 277V. 120V only for 35W HPS (min. start temp. -30 C for MH, -40 C for HPS). For Remote Ballast (RMT): max. dist. 48 ft. Compact Fluorescent Lampholder (2 Pin): G23 (5W), rated 75W, 600V. Ballast: Magnetic class P, NPF, available in 120V or 277V (min. start temp. 10 C for 120V or 0 C for 277V). Remote: 10 ft. Compact Fluorescent Lampholder (4 Pin): G24q-1 or GX24q-1 (13W), G24q-2 or GX24q-2 (18W), G24q-3 or GX24q-3 (26W), GX24q-3 (32W), GX24q-4 (42W), GX24q-5 (57W) rated 75W, 600V. Ballast: Electronic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 15 ft (1 lamp), 6 ft (2 lamps). Note: Dimming capability for compact fluorescent lamps requires alternate ballast. Please contact your local representative or factory for options. Through Wiring: A maximum of four (4) No. 12 AWG conductors (plus ground wire), rated 90 C min. Finish: Powder coat. Standard color in black, white or natural aluminum finish. 2007.4.17 Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) Available with Quartz Restrike. Add Q at the end of Lamp Code. ie...mh70q. RMT - Remote ballast Option (see back cover) C2.1 : ADA compliant fixture Tel:888.458.6368 Los Angeles, CA www.lumenton.com Product specifications subject to change without notice. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. ADA compliant and suitable for installation within 4 feet of ground.
LLF850 Low Level Flood with Open Faceplate 2007.4.17 Required Wall Recessed Opening: Width: 11 3/4'' x Height: 10 1/4'' Depth: 3 7/8'' Applications: Rectangular recessed wall luminaire with a complete indirect faceplate. Designed to conform with architectural requirements for heavy traffic areas where additional guidance and/or security lighting is required. This unit is suitable for low mounting heights for the illumination of steps, stairways, walkways, aisles, ramps and other indoor and outdoor applications. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish and silicone gasket. Includes an integral wiring compartment with a semi-specular anodized aluminum reflector. Four (4) threaded hole (3/4-14" NPSM) provided. Faceplate: Rectangular open one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and and semi-translucent UV stabilized polycarbonate prismatic lens. Faceplate is secured to housing by four (4) captive, tamper resistant, stainless steel screws. Electrical: Line Voltage Lampholder: Medium Base Incandescent T10 or A21 (100W Max.) with high temperature leads (660W, 600V). H.I.D. Lampholder: Porcelain, medium base, nickel-plated contacts, 4 KV pulse rated with high temperature leads (660W, 600V). - Metal Halide (MH) ED17 (50W) - High Pressure Sodium (HPS) B17 (35/50W). Ballast: Magnetic, HPF. Available in 120V or 277V. 120V only for 35W HPS (min. start temp. -30 C for MH, -40 C for HPS). For Remote Ballast (RMT): max. dist. 48 ft. Compact Fluorescent Lampholder (2 Pin): G23 (5W), rated 75W, 600V. Ballast: Magnetic class P, NPF, available in 120V or 277V (min. start temp. 10 C for 120V or 0 C for 277V). Remote: 10 ft. Compact Fluorescent Lampholder (4 Pin): G24q-1 or GX24q-1 (13W), G24q-2 or GX24q-2 (18W), G24q-3 or GX24q-3 (26W), GX24q-3 (32W), GX24q-4 (42W) rated 75W, 600V. Ballast: Electronic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 15 ft (1 lamp), 6 ft (2 lamps). Note: Dimming capability for compact fluorescent lamps requires alternate ballast. Please contact your local representative or factory for options. Through Wiring: A maximum of four (4) No. 12 AWG conductors (plus ground wire), rated 90 C min. Finish: Powder coat. Standard color in black, white or natural aluminum finish. ORDERING Example : LLF850/PL18/277/B LLF850 / Lamp / Volt / Lamp Description Lumen Base Bulb Compact Fluorescent 9W PL 600 G23 2 Pin PL9 13W PL 900 G24q-1 4 Pin PL13 18W PL 1200 G24q-2 4 Pin PL18 26W PL 1710 G24q-3 4 Pin PL26 32W PL 2400 GX24q-3 4 Pin PL32 42W PL 3200 GX24q-4 4 Pin PL42 (2) 9W PL 1200 G23 2 Pin PL209 (2) 13W PL 1800 G24q-1 4 Pin PL213 (2) 18W PL 2400 G24q-2 4 Pin PL218 (2) 26W PL 3600 G24q-3 4 Pin PL226 High Intensity Discharge 35W HPS 2250 MED B17 HPS35 50W HPS 4000 MED B17 HPS50 50W MH 3450 MED ED17 MH50 Incandescent INC100 1500 MED A21 INC100 Finish 120 B Black 277 N Natural RMT W White Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. ADA compliant and suitable for installation within 4 feet of ground. Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com Product specifications subject to change without notice. : ADA compliant fixture C3.1
LLF855 Low Level Flood with Guard Bars ORDERING Example : LLF855/HPS35/RMT/W LLF855 / Lamp / Volt / Finish Lamp Description Lumen Base Bulb Compact Fluorescent 9W PL 600 G23 2 Pin PL9 120 B Black 13W PL 900 G24q-1 4 Pin PL13 277 N Natural 18W PL 1200 G24q-2 4 Pin PL18 RMT W White 26W PL 1710 G24q-3 4 Pin PL26 32W PL 2400 GX24q-3 4 Pin PL32 42W PL 3200 GX24q-4 4 Pin PL42 (2) 9W PL 1200 G23 2 Pin PL209 (2) 13W PL 1800 G24q-1 4 Pin PL213 (2) 18W PL 2400 G24q-2 4 Pin PL218 (2) 26W PL 3600 G24q-3 4 Pin PL226 High Intensity Discharge 35W HPS 2250 MED B17 HPS35 50W HPS 4000 MED B17 HPS50 50W MH 3450 MED ED17 MH50 Incandescent INC100 1500 MED A21 INC100 Required Wall Recessed Opening: Width: 11 3/4'' x Height: 10 1/4'' Depth: 3 7/8'' Applications: Rectangular recessed wall luminaire with a complete indirect faceplate. Designed to conform with architectural requirements for heavy traffic areas where additional guidance and/or security lighting is required. This unit is suitable for low mounting heights for the illumination of steps, stairways, walkways, aisles, ramps and other indoor and outdoor applications. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish and silicone gasket. Includes an integral wiring compartment with a semi-specular anodized aluminum reflector. Four (4) threaded hole (3/4-14" NPSM) provided. Faceplate: Rectangular semi-concealed with guard bars one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-concealed tempered glass lens. Faceplate is secured to housing by four (4) captive, tamper resistant, stainless steel screws. Electrical: Line Voltage Lampholder: Medium Base Incandescent T10 or A21 (100W Max.) with high temperature leads (660W, 600V). H.I.D. Lampholder: Porcelain, medium base, nickel-plated contacts, 4 KV pulse rated with high temperature leads (660W, 600V). - Metal Halide (MH) ED17 (50W) - High Pressure Sodium (HPS) B17 (35/50W). Ballast: Magnetic, HPF. Available in 120V or 277V. 120V only for 35W HPS (min. start temp. -30 C for MH, -40 C for HPS). For Remote Ballast (RMT): max. dist. 48 ft. Compact Fluorescent Lampholder (2 Pin): G23 (5W), rated 75W, 600V. Ballast: Magnetic class P, NPF, available in 120V or 277V (min. start temp. 10 C for 120V or 0 C for 277V). Remote: 10 ft. Compact Fluorescent Lampholder (4 Pin): G24q-1 or GX24q-1 (13W), G24q-2 or GX24q-2 (18W), G24q-3 or GX24q-3 (26W), GX24q-3 (32W), GX24q-4 (42W) rated 75W, 600V. Ballast: Electronic, HPF. Available in 120V or 277V (min. start temp. -30 C). For Remote Ballast (RMT): max. dist. 15 ft (1 lamp), 6 ft (2 lamps). Note: Dimming capability for compact fluorescent lamps requires alternate ballast. Please contact your local representative or factory for options. Through Wiring: A maximum of four (4) No. 12 AWG conductors (plus ground wire), rated 90 C min. Finish: Powder coat. Standard color in black, white or natural aluminum finish. 2007.4.17 Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com C3.2 : ADA compliant fixture Product specifications subject to change without notice. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. ADA compliant and suitable for installation within 4 feet of ground.
ELECTRICAL BOX for REMOTE BALLAST R E M O T E B A L L A S T I N F O R M AT I O N REMOTE BALLAST Applications: For remote High Intensity Discharge (HID) or Compact Fluorescent (CF) ballasts. Common uses are fixtures designed for remote ballast, multiple fixtures running off one ballast or a centralized electrical input location for all remote ballasts. For use on top of buildings, walls, and in ground for both indoor and outdoor locations. RAG: ABOVE GROUND ELECTRICAL BOX for REMOTE BAL BOX for REMOTE BALLAST Ballast Box Enclosure: Made from aluminum ELECTRICAL (powder coat), galvanized steel, or fiberglass. Silicone/polyurethane gasket used to seal cover. Trade size conduit holes/threaded (1/2 or 3/4) for wire/cord exit. Ballast box secured to the mounting surface by screws/bolts (by other). Please consult factory for ballast box enclosure type used for your application. (Remote Above Ground): Ballast box located horizontal above mounting surface. Options: B = Remote Ballast Only (All Remote Ballasts) RIG: IN GROUND M = Remote Ballast with Emergency Ballast (CF only) Volts (See Fixture Specification) Lamp (See Fixture Specification) Note: See fixture specifications for Remote Ballast Box Max. distance to lamp. Finish: Powder coat. Standard colors in black (Aluminum housing). Listing: UL / ETL Listed, suitable for wet locations. (Remote In Ground): RWS Ballast box located in ground. WALL SURFACE RWS: WALL SURFACE ORDERING / Remote Type Above Ground In Ground Wall Surface Remote Type Remote Ballast (Only) Remote Ballast & Emergency Ballast (CF) Options Options Volts Lamps RAG RIG RWS Volts (See Fixture Specifications) Lamps (See Fixture Specifications for more lamp codes) B M UNV 120 277 PL9 PL13 PL18 PL26 PL32 PL42 PL57 PL209 PL213 PL218 PL226 PL232 ORDERING EXAMPLES 1.RAGB120PL32 2.RAGM277PL32 = = Remote Ballast, 120V input, CF 32 Watt Lamp Remote Ballast, Emergency Ballast (120V) input, CF 32 Watt Lamp (Remote Wall Surface): Ballast Box located vertically on mounting surface. RWS WALL S