PRODUCT SPECIFICATIONS *HBC(X) *PHBC(X) *RHBC(X) *CHBC(X) Chilled Water/Hot Water 2-pipe/4-Pipe HBC SERIES- HBCX SERIES-ECM MOTOR Ceiling Concealed Horizontal -1 CFM Ceiling Concealed Ceiling Recessed Ceiling Exposed Ceiling Concealed with Plenum GH EFFICIENCY GH PERFORMANCE ECM Motor Opons The ECM motor opon includes 24V controls, a constant torque, permanent magnet, brushless DC motor, with 4 discrete speed taps that allow for high stac applicaons and precise air balancing Ceiling Recessed MERV 8 LOUVERED ACCESS PANELS Page 29 Ceiling Exposed First Company P.O. Box 270969 Dallas, TX 75227 Ph. (214)-388-5751 www.firstco.com
Table of Contents 2 Nomenclature 2 Features 3 Physical Data 4-7 Cooling Performance 8-10 Heating Performance 11 Correction Factors 12 Blower Performance PSC Motor 13-22 Blower Performance ECM Motor 23-26 Guide Specifications 27-28 Access/Filter Panels 29 Accessories 30 Blower Performance Tables (PSC Motor) 120/1/60 HBC 13 PHBC (With Plenum) 14 RHBC (Recessed with Panel) 15 277/1/60 HBC 16 PHBC (With Plenum) 17 RHBC (Recessed with Panel) 18 220/0 HBC 19 PHBC (With Plenum) 20 RHBC (Recessed with Panel) 21 CHBC (Cabinet Exposed) All Voltages 22 Blower Performance Tables (ECM Motor) (120/1/60) HBCX 3-Row 23 PHBCX 3-Row (With Plenum) 24 RHBCX 3-Row (Recessed with Panel) 25 CHBCX 3-Row (Cabinet Exposed) 26 HBCX 4-Row 23 PHBCX 4-Row (With Plenum) 24 RHBCX 4-Row (Recessed with Panel) 25 CHBCX 4-Row (Cabinet Exposed) 26 HBCX 32-Row 25 CHBCX 32-Row (Cabinet Exposed) 26 NOMENCLATURE 6 * R - HBC X - 4 RH Nominal CFM (100 s) 3,4,5,6,8,10,13 Factory Use *Coil Rows **Coil Connection Side Unit Configuration P Return Air Plenum R Recessed, Telescoping Panel C Cabinet Exposed Optional ECM Motor (4, 6, 8, 10, 12) Horizontal Series **Coil Connection Side RH Right Hand (default) LH Left Hand Hand connection is determined by looking with airflow Available Voltage (PSC Motors) 120V/1/60 208-230V/1/60 220V/0 277V/1/60 Available Voltage (ECM Motors) 120V/1/60 *Coil Configurations Rows Description 3 2-Pipe 3 Row 4 2-Pipe 4 Row 31 4-Pipe 3 Row Cooling, 1-Row Hot Water 32 4-Pipe 3 Row Cooling, 2-Row Hot Water 41 4-Pipe 4 Row Cooling, 1-Row Hot Water -2-
NEW! ECM Motor Option This new ECM motor option includes 24V controls, a constant torque, permanent magnet, brushless DC motor, with 4 discrete speed taps that allow for precise air balancing. Standard Features Basic Unit - All fan coils are manufactured with heavy gauge galvanized steel to resist corrosion. All models are approved for installation with 0 clearance to combustible material. Insulation - Plenums and cabinets are insulated with Tuf-Skin dual density fiber glass blanket insulation with an anti-microbial agent. Ceiling Panels - Hinged access/return panels are manufactured with heavy gauge galvanized steel with captive mounting screws and an attractive white baked powder finish. Condensate Pans - Positive sloped drain pans are galvanized steel, coated on the inside surface with a U.L. Listed closed cell, fire retardant, foam insulation. Pan includes both primary and secondary drain connections. Return Air Plenums - Return air plenums are manufactured from galvanized steel insulated with Tuf-Skin dual density fiber glass blanket insulation and a 1 TA fiber glass filter. Coils - Constructed with seamless copper tubes and headers. The tubes are mechanically expanded into corrugated aluminum fin material for a permanent primary to secondary surface bond. Coils are tested under water at PSI for operation at PSI. Coils include manual air vents. Fan Wheels-Housing - are double width, double inlet (DWDI) forward curved, centrifugal type. Wheels are statically and dynamically balanced for smooth, quite operation. The housing is constructed from heavy gauge galvanized steel with die-formed inlet cones. Motors - Standard motors are PSC, permanently lubricated type with internal thermal overload protection. *HBC(X) Series - Ceiling Concealed The * HBC series is designed for fully concealed applications. This 10 high space saving unit provides easy access for service and maintenance. *PHBC(X) Series - Ceiling Concealed with Plenum The * HBC series is designed for fully concealed applications. This 10 high space saving unit provides easy access for service and maintenance. *RHBC(X) Series - Ceiling Recessed includes adjustable hinged access/return panel with 1 TA fiber glass filter. The cabinet allows for a field mounted rear return duct connection by using a solid access panel. *CHBC(X) Series - Ceiling Recessed cabinet with an attractive baked powder finish. Cabinet includes stamped discharge opening and hinged bottom panel with 1 TA fiber glass filter. Options Factory mounted options include ECM motors 120V only, stainless steel drain pans, foil faced cabinet insulation, Multi-24 3-speed 24V control, valve packages, thermostats, aqua stats, service switches. 120V, 208V/240V, 277V, 60hz and (220/50hz, S ONLY) *Factory use (X) Denotes with ECM motor -3-
*HBC PHYSICAL DATA LEFT HAND SHOWN SECONDARY DRAIN 7/8 O.D. (SWEAT) GENERAL DIMENSIONS A B C D 3*HBC 30-1/8 27-1/4 20-1/8 25-1/4 4*HBC(X) 36-1/8 33-1/4 26-1/8 31-1/4 5*HBC 40-1/8 37-1/4 30-1/8 35-1/4 6*HBC(X) 40-1/8 37-1/4 30-1/8 35-1/4 8*HBC(X) 46-1/8 43-1/4 36-1/8 41-1/4 10*HBC(X) 52-1/8 49-1/4 42-1/8 47-1/4 12*HBC(X) 59-1/8 56-1/4 49-1/8 54-1/4 13*HBC 59-1/8 56-1/4 49-1/8 54-1/4 (X)- Available with ECM motor NOTES: 1) ALL DIMENSIONS IN INCHES. 2) COIL CONNECTION TOLERANCE ± 1/4. 3) RIGHT HAND UNIT SHOWN, LEFT HAND MIRROR IMAGE. (HAND IS DETERMINED BY FACING THE BER END) PART NO OPTIONAL FIELD MOUNTED RETURN AIR PLENUM KITS FOR NO. DIMENSIONS (H X W X D) SP WT. 916-1-STK 3*HBC 10 X 24 X 12-1/2 18 916-2-STK 4*HBC(X) 10 X 30 X 12-1/2 22 916-3-STK 5*HBC 10 X 34 X 12-1/2 22 916-3-STK 6*HBC(X) 10 X 34 X 12-1/2 22 916-4-STK 8*HBC(X) 10 X 40 X 12-1/2 24 916-5-STK 10*HBC(X) 10 X 46 X 12-1/2 27 916-6-STK 13*HBC 10 X 53 X 12-1/2 30 HBC HEADER LOCATIONS HBC HEADER LOCATIONS RIGHT HAND X1 Y1 X2 Y2 X3 Y3 Y4 LEFT HAND X1 Y1 X2 Y2 X3 Y3 Y4 3 ROW 3 4-1/4 5 4 - - - - - - - - - 3 ROW 3 3-3/4 5 4 - - - - - - - - - 3/1 Split 3 4-1/4 5 4 8 3-1/2 5-1/2 3/1 Split 3 3-3/4 5 4 8 2-1/2 4-1/2 3/2 Split 3 4-1/4 5 4 8 3-1/2 5-1/2 3/2 Split 3 3-3/4 5 4 8 2-1/2 4-1/2 4 ROW 3 4-1/4 5 4 - - - - - - - - - 4 ROW 3 3-3/4 5 4 - - - - - - - - - 4/1 Split 3 4-1/4 5 4 8 4 6 4/1 Split 3 3-3/4 5 4 8 2 4-4-
*PHBC PHYSICAL DATA NOTES: 1. Return plenums are insulated. 2. All plenums include throw-away filter. 3. Standard plenums are end return and can be field converted to bottom return. 4. Filter has separate access panel. SECONDARY DRAIN 7/8 O.D. (SWEAT) E RIGHT SIDE 10 12 1/2 PHBC HEADER LOCATIONS GENERAL DIMENSIONS A B C D E FILTER SIZE (INCL.) 3*PHBC 24 22 20-1/8 30-1/8 27-1/4 10 X 24 4*PHBC(X) 30 28 26-1/8 36-1/8 33-1/4 10 X 30 5*PHBC 34 32 30-1/8 40-1/8 37-1/4 10 X 34 6*PHBC(X) 34 32 30-1/8 40-1/8 37-1/4 10 X 34 8*PHBC(X) 40 38 36-1/8 46-1/8 43-1/4 10 X 40 10*PHBC(X) 46 44 42-1/8 52-1/8 49-1/4 10 X 46 12*PHBX(X) 53 51 49-1/8 59-1/8 56-1/4 10 x 53 13*PHBC 53 51 49-1/8 59-1/8 56-1/4 10 X 53 (X)- Available with ECM motor CONNECTIONS PRIMARY O.D. NOTES: 1) ALL DIMENSIONS IN INCHES. 2) COIL CONNECTION TOLERANCE ± 1/4. 3) RIGHT HAND UNIT SHOWN, LEFT HAND MIRROR IMAGE. (HAND IS DETERMINED BY FACING THE BER END) 4/1 Split 3 4-1/4 5 4 8 4 6 4/1 Split 3 3-3/4 5 4 8 2 4-5- 5/8 PHBC HEADER LOCATIONS RIGHT HAND X1 Y1 X2 Y2 X3 Y3 Y4 LEFT HAND X1 Y1 X2 Y2 X3 Y3 Y4 3 ROW 3 4-1/4 5 4 - - - - - - - - - 3 ROW 3 3-3/4 5 4 - - - - - - - - - 3/1 Split 3 4-1/4 5 4 8 3-1/2 5-1/2 3/1 Split 3 3-3/4 5 4 8 2-1/2 4-1/2 3/2 Split 3 4-1/4 5 4 8 3-1/2 5-1/2 3/2 Split 3 3-3/4 5 4 8 2-1/2 4-1/2 4 ROW 3 4-1/4 5 4 - - - - - - - - - 4 ROW 3 3-3/4 5 4 - - - - - - - - -
*RHBC PHYSICAL DATA NOTES: 1. Telescoping panel allows the cabinet to be installed to within 2 inches of the ceiling line. The adjustable panel frame ensures a flush installation. 2. Louvered access panel (bottom return) is standard. Specify solid panel if ducted rear return air is required. NOTES: 1) ALL DIMENSIONS IN INCHES. 2) COIL CONNECTION TOLERANCE ± 1/4. 3) RIGHT HAND UNIT SHOWN, LEFT HAND MIRROR IMAGE. (HAND IS DETERMINED BY FACING THE BER END) LEFT SIDE 13.50 SPACE AVAILABLE FOR PIPING 13.50 SPACE AVAILABLE FOR PIPING 24-3/8 21-7/8 LEFT HAND CONNECTIONS 9.25 5.25 BACK PANEL 7/8 ELEC. K.O. RIGHT HAND CONNECTIONS 5.8 4.1 0 0 I OPENINGS FOR WATER PIPING 3.63 DRAIN LINE OPENINGS CEILING PANEL 7.1 9.2 2.81 2.81 LANCED FOR FIELD REMOVAL FOR REAR RETURN AIR TYPICAL SLOT GENERAL DIMENSIONS A B C D E F G H I TELESCOPING LOUVERED ACCESS PANEL TELESCOPING SOLID ACCESS PANEL FILTER SIZE (INCL) 3*RHBC 41 38-1/8 29 4-1/2 36-5/8 2-3/16 5-1/2 36 14 968-1 968-1S 10 X 37 4*RHBC(X) 47 44-1/8 35 4-1/2 42 2-1/2 5-1/2 42 20 968-2 968-2S 10 X 43 5*RHBC 51 48-1/8 39 4-1/2 47-1/4 1-7/8 5-1/2 46 24 968-3 968-3S 10 X 47.5 6*RHBC(X) 51 48-1/8 39 4-1/2 47-1/4 1-7/8 5-1/2 46 24 968-3 968-3S 10 X 47.5 8*RHBC(X) 57 54-1/8 45 4-1/2 52-1/2 2-1/4 5-1/2 52 30 968-4 968-4S 10 X 53 10*RHBC(X) 63 60-1/8 51 4-1/2 57-7/8 2-9/16 5-1/2 58 36 968-5 968-5S 10 X 59 12*RHBC(X) 70 67-1/8 58 4-1/2 63-1/8 3-7/16 5-1/2 65 42 968-6 968-6s 10 x 65 13*RHBC 70 67-1/8 58 4-1/2 63-1/8 3-7/16 5-1/2 65 42 968-6 968-6S 10 X 65 (X)- Available with ECM motor -6-
*CHBC PHYSICAL DATA NOTES: 1) ALL DIMENSIONS IN INCHES. 2) COIL CONNECTION TOLERANCE ± 1/4. 3) RIGHT HAND UNIT SHOWN, LEFT HAND MIRROR IMAGE. (HAND IS DETERMINED BY FACING THE BER END) GENERAL DIMENSIONS A B C D E F FILTER SIZE (INCL) 3*CHBC 38 34 26 6 31-1/2 3-1/2 10 X 37 4*CHBC(X) 44 40 31-1/2 6 37 3-1/2 10 X 43 5*CHBC 48 44 37 5-1/2 42-1/2 3 10 X 46 6*CHBC(X) 48 44 37 5-1/2 42-1/2 3 10 X 46 8*CHBC(X) 54 50 42-1/2 6 48 3 10 X 53 10*CHBC(X) 60 56 48 6 53 3-1/2 10 X 59 12*CHBC(X) 67 63 53 7 58-1/2 4 10 X 65 13*CHBC 67 63 53 7 58-1/2 4 10 X 65 CONNECTIONS PRIMARY O.D. 5/8 NOTES: 1. Side panels are removable for easier valve access. (X)- Available with ECM motor -7-
COOLING CAPACITIES *HBC-3 (3-Row Coil) All capacities are based on nominal CFM. COOLING CAPACITY (1000 BTUH) NOMINAL CFM 3*HBC-3 4*HBC-3 5*HBC-3 6*HBC-3 600 8*HBC-3 800 10*HBC-3 1000 13*HBC-3 1 GPM 5.5 4.5 3.5 P.D. (FT. WTR.) 3.6 14.7 4.4 3.8 3.8 10.0 4.3 17.9 1 14.1 7.4 45 o F ENTERING WATER 42 o F ENTERING WATER 80 o F D.B. (67 o F W.B.) 75 o F D.B. (63 o F W.B.) P.D. 80 o F D.B. (67 o F W.B.) 75 o F D.B. (63 o F W.B.) GPM TH SH TR TH SH TR (FT. WTR.) TH SH TR TH SH TR 10.8 10.4 9.9 13.2 12.3 17.9 17.3 1 1 20.6 1 18.7 1 24.7 23.7 22.3 20.1 30.3 29.2 27.9 26.2 3 33.6 31.9 29.7 7.4 7.3 7.1 9.1 8.5 12.2 1 11.3 14.1 13.4 12.8 17.6 17.3 16.8 1 21.7 21.3 20.8 20.1 25.4 24.9 24.3 23.5 9.9 12.1 9.2 12.3 14.4 10.0 7.9 11.3 7.6 8.6 9.9 1 7.6 8.4 9.3 8.8 10.6 11.9 7.5 10.6 10.0 13.2 1 15.7 15.1 14.3 1 1 18.1 1 15.4 23.2 22.3 21.3 20.0 2 25.7 24.4 22.7 6.3 6.2 5.9 8.4 7.5 12.3 12.1 11.8 11.2 15.5 15.1 14.7 14.1 1 18.7 1 17.8 22.3 21.9 21.4 20.8 5.5 6.4 7.5 9.2 1 4.6 5.3 6.3 7.7 5.2 8.6 5.8 6.6 7.6 8.8 5.8 6.4 7.1 7.3 8.1 9.1 5.5 4.5 3.5 3.6 14.7 4.4 3.8 3.8 10.0 4.3 17.9 1 14.1 7.4 11.8 11.4 10.8 9.9 15.1 14.3 13.4 11.8 1 1 17.9 16.4 22.4 21.6 20.4 18.5 2 25.8 24.3 21.9 3 31.9 30.4 28.5 3 3 34.8 32.4 7.8 7.6 7.4 7.1 9.5 12.9 12.3 14.8 14.5 14.1 13.4 18.5 18.1 17.5 16.6 22.7 22.3 21.7 2 26.6 2 25.3 24.4 7.9 9.1 10.8 13.1 1 13.4 15.7 7.5 10.9 7.5 8.6 12.3 10.8 1 9.1 11.4 9.5 11.6 12.9 8.7 7.5 1 1 14.9 14.4 1 17.1 1 15.6 14.1 20.6 19.7 18.6 1 25.2 24.3 23.2 21.8 29.1 2 26.6 24.7 6.8 6.6 6.4 6.2 8.8 8.6 7.8 11.1 10.9 12.9 12.3 16.1 15.8 15.3 14.6 1 1 1 18.5 23.2 22.8 22.3 2 10.0 7.7 8.8 1 5.8 5.7 6.6 7.8 6.3 6.3 7.7 8.7 7.3 9.9 *HBC-4 (4-Row Coil) All capacities are based on nominal CFM. COOLING CAPACITY (1000 BTUH) NOMINAL CFM 3*HBC-4 4*HBC-4 5*HBC-4 6*HBC-4 600 8*HBC-4 800 10*HBC-4 1000 13*HBC-4 1 GPM 1.2 3.5 P.D. (FT. WTR.) 11.4 7.6 4.5 2.2 13.2 5.3 3.6 4.9 3.5 2.3 4.9 2.3 14.7 4.4 14.1 7.4 4.9 16.1 1 8.5 5.6 45 o F ENTERING WATER 42 o F ENTERING WATER 80 o F D.B. (67 o F W.B.) 75 o F D.B. (63 o F W.B.) P.D. 80 o F D.B. (67 o F W.B.) 75 o F D.B. (63 o F W.B.) GPM TH SH TR TH SH TR (FT. WTR.) TH SH TR TH SH TR 1 10.9 10.0 14.5 13.5 11.9 17.5 16.6 15.4 13.9 21.9 20.8 18.8 15.6 2 25.7 23.7 20.8 32.6 31.1 29.2 26.4 37.5 35.7 33.1 29.7 7.8 7.6 6.6 9.7 9.1 8.6 12.4 1 11.6 1 15.1 14.6 13.9 12.7 19.1 18.6 17.8 16.8 23.3 22.8 2 2 27.3 26.6 25.7 24.4 9.2 10.9 13.3 1 11.6 13.5 15.9 17.5 10.0 11.1 12.3 13.9 8.8 10.4 1 15.6 10.3 11.9 13.9 9.3 10.4 13.2 11.9 13.3 14.8 8.8 7.6 6.3 11.1 10.3 9.1 13.4 12.7 11.8 10.6 16.8 15.9 14.4 11.9 20.6 1 18.1 15.9 24.9 23.8 22.3 20.2 28.7 2 25.3 24.6 6.8 6.6 6.3 5.8 8.8 8.5 7.6 10.8 9.7 13.1 12.7 12.2 11.2 1 16.3 15.7 14.8 20.4 19.9 1 18.6 23.9 23.4 22.6 24.6 10.3 12.2 17.1 7.7 8.5 10.6 7.9 11.9 7.8 10.6 7.1 7.9 9.1 12.3 25 1.2 3.5 11.4 7.6 4.5 2.2 13.2 5.3 3.6 4.9 3.5 2.3 5.3 4.9 2.3 14.7 4.4 14.1 7.4 4.9 16.1 1 8.5 5.6 1 11.9 10.9 15.8 14.7 1 1 19.1 18.1 16.8 15.2 23.9 22.6 20.5 1 2 2 25.9 22.7 35.5 33.9 31.8 28.8 40.9 3 36.1 22.3 7.6 10.6 13.3 12.1 1 15.8 15.3 14.5 13.2 20.0 19.5 18.6 17.5 24.4 23.8 2 21.9 28.6 27.8 26.8 25.4 10.0 11.9 14.5 1 12.7 14.7 17.4 19.1 10.9 12.1 13.5 15.2 11.3 1 11.2 12.9 15.1 11.3 12.7 14.4 1 14.4 16.2 9.1 12.1 11.3 9.9 8.8 14.6 12.9 11.6 1 17.3 15.7 1 2 21.4 19.7 17.3 27.1 25.9 24.3 2 31.2 29.7 27.6 24.7 7.1 6.6 6.1 9.2 8.4 7.9 11.3 1 10.6 13.3 12.7 11.6 17.4 1 16.3 15.4 21.3 20.8 20.1 19.3 24.9 24.3 23.5 22.4 7.7 9.1 11.1 9.7 11.3 13.3 14.6 9.2 10.3 11.6 7.3 8.6 10.4 1 7.5 8.6 9.9 1 7.8 8.6 9.7 1 9.9 1 12.4-8-
COOLING CAPACITIES *HBC (3-Row Coil) All capacities are based on nominal CFM. COOLING CAPACITY (1000 BTUH) NOMINAL CFM 3*HBC 4*HBC 5*HBC 6*HBC 600 8*HBC 800 10*HBC 1000 13*HBC 1 GPM 5.5 4.5 3.5 P.D. (FT. WTR.) 3.6 14.7 4.4 3.8 3.8 10.0 4.3 17.9 1 14.1 7.4 45 o F ENTERING WATER 42 o F ENTERING WATER 80 o F D.B. (67 o F W.B.) 75 o F D.B. (63 o F W.B.) P.D. 80 o F D.B. (67 o F W.B.) 75 o F D.B. (63 o F W.B.) GPM TH SH TR TH SH TR (FT. WTR.) TH SH TR TH SH TR 10.4 10.0 8.6 13.2 10.3 17.1 1 15.7 14.3 19.5 18.8 17.8 16.1 23.4 22.4 21.1 29.1 28.7 27.7 26.4 24.8 33.1 31.8 30.2 28.1 7.1 6.8 9.2 8.7 1 11.2 13.4 13.2 12.8 12.2 16.8 16.4 15.9 15.2 20.6 20.2 1 19.2 24.4 23.7 23.1 22.3 1 8.8 10.0 5.7 6.6 7.8 9.5 7.5 10.9 7.9 8.8 9.9 9.1 11.2 7.9 7.6 6.6 7.9 1 1 10.9 14.9 14.3 13.6 12.3 17.9 17.1 16.1 14.6 21.9 21.1 20.2 1 25.3 24.3 23.1 2 6.2 6.1 5.9 5.7 7.9 7.6 10.0 1 11.2 14.7 14.4 1 13.4 18.1 17.8 17.4 1 21.2 20.9 20.4 1 5.. 6.1 8.8 7.7 4.3 7.3 5.7 6.8 5.5 6.2 5.5 7.6 6.3 7.7 8.6 5.5 4.5 3.5 3.6 14.7 4.4 3.8 3.8 10.0 4.3 17.9 1 14.1 7.4 11.3 10.9 10. 14.4 12.8 11.3 18.6 1 17.1 15.6 21.3 20.5 1 17.5 25.5 24.5 2 20.8 31.3 30.2 28.8 2 36.1 34.7 3 30.6 7.5 7.3 7.1 9.7 9.1 8.5 12.3 1 11.1 14.1 13.4 12.7 17.6 1 16.6 15.8 21.6 21.1 20.6 20.0 25.3 24.7 24.1 23.2 7.5 8.7 10.3 1 12.8 1 6.2 8.5 10.4 7.1 9.7 7.9 11.9 7.8 8.6 10.8 9.9 1 12.3 8.6 7.9 1.2 1 9.7 8.6 14.2 13.1 11.9 16.2 15.6 14.8 13.4 19.5 18.7 17.6 15.9 23.9 2 2 20.6 27.6 2 25.2 23.4 6.3 6.2 5.9 8.4 7.9 7.5 10.6 10.4 9.7 12.3 1 11.2 15.3 1 14.6 13.9 18.8 15.8 18.1 17.6 22.1 21.7 21.2 20.5 5.8 6.6 7.9 7.3 8.4 9.7 1 4.7 5.5.0 5.4 6.2 7.4 6.8 7.8 9.1 6.6 7.3 7.6 8.4 *HBC (3-Row Coil) All capacities are based on nominal CFM. COOLING CAPACITY (1000 BTUH) NOMINAL CFM 3*HBC 4*HBC 5*HBC 6*HBC 600 8*HBC 800 10*HBC 1000 13*HBC 1 GPM 5.5 4.5 3.5 P.D. (FT. WTR.) 3.6 14.7 4.4 3.8 3.8 10.0 4.3 17.9 1 14.1 7.4 45 o F ENTERING WATER 42 o F ENTERING WATER 80 o F D.B. (67 o F W.B.) 75 o F D.B. (63 o F W.B.) P.D. 80 o F D.B. (67 o F W.B.) 75 o F D.B. (63 o F W.B.) GPM TH SH TR TH SH TR (FT. WTR.) TH SH TR TH SH TR 9.3 8.8 12.2 10.9 15.9 15.3 14.6 13.3 1 17.5 16.6 1 21.9 20.9 19.7 17.8 26.8 25.8 24.7 23.1 30.9 29.7 2 26.2 6.4 6.2 5.9 8.5 7.5 10..7 12.3 1 11.1 15.3 14.9 14.5 18.7 1 17.9 17.4 21.9 21.4 20.9 20.2 6.4 7.4 8.8 9.3 10.9 12.8 5.3 6.1 7.3 6.1 10.0 7.6 8.8 7.4 9.2 7.7 8.5 7.3 7.1 6.1 7.3 12.1 11.1 13.9 13.4 1 1 1 15.1 13.6 20.5 19.7 18.8 17.6 23.6 22.7 21.6 20.0 5.7 5.6 5.4 5.2 7.4 6.6 9.2 8.6 10.3 13.4 13.1 12.8 12.2 16.4 16.1 15.8 15.3 19.2 1 18.5 17.9 4.9 5.7 6.2 7.1 4.7 5.6 6.8 5.1 5.8 7.8 5.1 5.8 7.8 5.1 5.8 7.1 5.9 5.5 4.5 3.5 3.6 14.7 4.4 3.8 3.8 10.0 4.3 17.9 1 14.1 7.4 8.7 13.4 12.7 11.9 17.3 1 15.9 14.5 1 19.1 18.1 16.4 23.8 22.8 2 1 29.2 2 2 25.2 33.7 32.4 30.8 28.6 6.2 8.6 7.8 11.3 1 12.9 12.2 11.6 1 15.6 15.1 14.4 1 19.2 18.7 18.1 22.9 22.4 21.8 2 8.1 11.9 1 5.8 7.9 9.7 6.6 7.6 10.9 7.3 11.1 7.3 8.4 9.3 10.3 11.4 7.7 7.3 9.7 9.1 13.2 12.8 12.1 11.1 15.2 14.6 1 1 17.4 16.4 14.8 22.3 2 20.5 19.2 25.8 24.7 23.5 21.8 5.8 5.7 5.4 7.7 7.5 7.3 11.2 1 1 13.3 12.7 17.1 16.8 16.4 15.9 20. 19.7 19.2 18.6 5.3 6.2 7.3 6.8 7.8 9.1 4.4 5.1 6.1 7.4 5.1 5.8 5.6 6.3 7.3 8.5 5.6 6.1 6.8 7.7 6.4 7.1 7.8 8.7-9-
-10- *HBC-41 (4-Row Coil) All capacities are based on nominal CFM. COOLING CAPACITIES Product Specifications
HEATING PERFORMANCE *HBC-3 (3-Row Coil) *HBC (1-Row Coil) HEATING CAPACITY (1000 BTUH) HEATING CAPACITY (1000 BTUH) NOMINAL CFM GPM P.D. (F. WTR) ENTERING WATER TEMP. 180 o F 160 o F 140 o F 120 o F NOMINAL CFM GPM P.D. (F. WTR) ENTERING WATER TEMP. 180 o F 160 o F 140 o F 120 o F 3*HBC-3 1.7 2 2 23.4 2 21.2 19.1 17.1 1 14.9 12.2 11.8 10.6 3*HBC 11.3 3.2 15.2 14.7 13.9 12.4 1 11.4 8.8 6.3 4*HBC-3 5*HBC-3 6*HBC-3 600 3.5 3.5 3.5 19.3 4.4 5.1 1.8 5.1 1.8 35.8 34.6 32.1 43.7 42.2 38.6 49.7 47.8 43.5 29.3 2 26.3 35.7 34.5 31.6 40.6 39.1 35.6 22.8 2 20.4 27.8 26.8 24.6 31.6 30.4 27.7 16.3 15.7 14.6 1 19.2 17.5 22.6 21.7 1 4*HBC 5*HBC 6*HBC 600 14.4 4.5 1 4.4 1 4.4 1 1 17.5 23.3 22.3 20.4 25.7 24.5 22.4 16.1 15.5 14.4 19.1 1 1 2 20.0 1 1 1 11.2 14.8 14.2 1 16.4 15.6 14.2 8.6 10.6 9.3 11.1 8*HBC-3 800 15.7 8.4 3.2 6 62.7 57.7 53.2 51.3 4 41.4 39.9 39.7 2 28.5 26.2 8*HBC 800 18.8 11.3 5.5 31.6 2 26.8 25.9 24.4 21.9 20.1 1 1 14.4 13.6 12.2 10*HBC-3 1000 17.9 4.5 79.2 76.6 71.9 64.8 62.7 58.8 50.4 48.8 45.7 3 34.8 32.7 10*HBC 1000 19.9 12.3 6.2 3 34.6 30.8 30.3 2 25.2 23.5 2 1 16.8 15.7 1 13*HBC-3 1 1 4.9 93.3 90.0 83.8 76.4 73.6 68.6 5 5 53.3 42.4 40.9 38.1 13A*HBC 1 23.4 1 6.8 42.3 3 35.2 34.6 32.2 28.8 2 25.1 22.4 19.2 17.9 1 *HBC-4 (4-Row Coil) *HBC (2-Row Coil) HEATING CAPACITY (1000 BTUH) HEATING CAPACITY (1000 BTUH) NOMINAL CFM GPM P.D. (F. WTR) ENTERING WATER TEMP. 180 o F 160 o F 140 o F 120 o F NOMINAL CFM GPM P.D. (F. WTR) ENTERING WATER TEMP. 180 o F 160 o F 140 o F 120 o F 3*HBC-4 15.9 7.6 2.2 28.6 27.6 14.9 23.4 22.6 20.3 1 17.6 15.8 1 11.3 3*HBC 5.1 1 17.7 15.9 1 14.5 1 11.2 4*HBC-4 5*HBC-4 6*HBC-4 600 1 2.6 4.9 2.3 4.9 37.6 35.8 31.3 45.6 4 41.2 53.2 5 50.1 30.7 29.3 25.6 37.3 3 33.7 43.5 42.6 4 23.9 22.8 19.9 2 2 26.2 33.9 33.1 31.9 17.1 16.3 14.2 20.7 20.0 18.7 24.2 23.6 22.8 4*HBC 5*HBC 6*HBC 600 11.2 5.4 1.6 13.4 6.4 1.9 13.4 6.4 1.9 2 22.8 20.0 28.8 2 23.4 32.1 30.3 25.8 1 18.7 16.4 23.5 22.3 19.1 26.2 24.8 21.1 15.2 14.5 12.7 1 17.3 14.9 20.4 19.3 16.4 10.9 10.4 9.1 13.1 12.4 10.6 14.6 8*HBC-4 800 4.5 14.7 4.4 68.8 66.4 6 56.3 54.3 50.7 43.8 42.3 3 31.3 30.2 2 8*HBC 800 8.4 4.8 2.2 40.5 38.6 35.4 33.1 21.6 2 25.8 24.6 2 18.4 17.5 16.1 10*HBC-4 1000 7.5 4.5 16.1 4.5 84.7 8 7 69.3 67.5 64.6 53.9 5 50.3 38.5 37.5 35.9 10*HBC 1000 8.1 4.7 2.2 4 45.7 41.3 39.5 37.4 33.8 30.7 29.1 26.3 21.9 20.8 18.8 13*HBC-4 1 20.8 1 8.5 100.5 97.9 94.1 92.2 80.1 7 63.9 62.3 69.9 45.7 44.5 42.8 13*HBC 1 7.8 4.3 1.9 56.1 52.8 47.3 45.9 43.2 38.7 35.7 33.6 30.1 25.5 2 2 *HBC-41 (1-Row Coil) HEATING CAPACITY (1000 BTUH) NOMINAL CFM 3*HBC-41 4*HBC-341 5*HBC-41 6*HBC-41 600 8*HBC-41 800 10*HBC-41 1000 13*HBC-41 1 GPM 2 P.D. (F. WTR) 11.3 3.2 14.4 4.5 1 4.4 1 4.4 18.8 11.3 5.5 19.9 12.3 6.2 23.4 1 6.8 ENTERING WATER TEMP. 180 o F 160 o F 140 o F 120 o F 14.1 1 1 17.6 16.3 21.4 20.5 18.8 23.2 22.1 20.2 28.4 26.8 24.1 33.3 31.1 27.7 38.1 35.4 31.6 11.6 11.2 10.6 14.9 14.4 1336 17.5 16.8 15.3 1 18.1 1 23.2 21.9 19.7 2 25.5 22.7 31.2 2 25.9 8.7 11.6 11.2 10.4 13.6 1 11.9 14.8 14.1 12.8 18.1 17.1 15.3 21.2 1 17.6 24.2 2 20.1 6.4 6.2 5.9 7.4 9.7 9.3 8.5 10.0 9.2 12.9 12.2 10.9 15.1 14.1 17.3 16.1 14.4 NOTES: 1. Ratings at 70 degree ent. air temp. 2. Contact factory for capacities at other conditions * - P - with insulated return plenum - R - recessed with telescoping panel - C - cabinet exposed -11-
COOLING CORRECTIONS COOLING CAPACITY CORRECTION FACTORS 3HBC 4HBC 5HBC 6HBC 8HBC 10HBC 13HBC CFM TH SH TH SH TH SH TH SH TH SH TH SH TH SH 150.70.64 175.75.70.80.76.85.82 250 0.9.88.70.64 0 0.76.71.70.64 4 6.79.75.72.67 1.10 1.12.82.78.75.70.69.63.88.86.80.76.73.68.94.93.85.82.77.73.71.66 0 0.90.88.81.77.74.69 6 7.95.94.85.82.78.73.71.65 600 1.12 1.14 0 0.89.87.81.78.74.68 1.10 1.12.98.98.88.85.79.75.70.64 800 5 6.95.94.85.82.74.69 900 1.14 1.16 2 2.90.88.78.74 1000 9 1.11.96.95.83.79 1100 1.15 1.18 2 2.87.85 1 7 9.92.90 1 1.12 1.14 6 5 1 0 0 1 4 5 TH - Total Heat SH - Sensible Heat COIL CFM 3*HBC-3 ARI APPROVED STANDARD RATINGS PRESS DROP (FT.WTR.) COOLING (1000 BTUH) TH SH POWER INPUT (WATTS) 310 120 4*HBC-3 1 13.4 9.5 120 5*HBC-3 600 16.3 1 130 6*HBC-3 3-ROW 730 20.0 1 240 8*HBC-3 870 2 1 10*HBC-3 1070 27.8 20.8 13*HBC-3 1 1 35.5 2 3*HBC-4 310 1 10.8 120 4*HBC-4 23.2 1 10.6 120 5*HBC-4 600 1 1 11.8 130 6*HBC-4 4-ROW 730 1 2 15.6 240 8*HBC-4 870 1 2 1 10*HBC-4 1070 1 32.2 23 13*HBC-4 1 2 4 29.5 Rated in accordance with ARI Standard. -12-
BER PERFORMANCE HBC 120 VOLT PSC MAX RPM AMPS (120V) 3*HBC-3 1/20 1050.09 4*HBC-3 1/12 1050 1.1 5*HBC-3 1/12 1050 1.3 6*HBC-3 1/8 1.9 8*HBC-3 10*HBC-3 1/4 3.6 13*HBC-3 3*HBC-4 4*HBC-4 5*HBC-4 6*HBC-4 8*HBC-4 10*HBC-4 13*HBC-4 3*HBC-41 4*HBC-41 5*HBC-41 6*HBC-41 8*HBC-41 10*HBC-41 13*HBC-41 2.3 1/20 1050 0.9 1/12 1050 1.1 1/12 1050 1.3 1/8 1.9 1/4 3.6 HBC (120 Volt) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 120 Volt) FAN (4) 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 335 275 230 525 950 690 1175 950 805 1545 1 1190 245 210 730 920 1145 930 1 1 1160 270 220 330 280 705 895 730 1115 785 1 1280 1130 235 290 870 1085 900 1 1240 1150 565 840 690 1055 885 1 1205 1075 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 120 Volt) 2.3 1/20 1050 0.9 1/12 1050 1.1 1/12 1050 1.3 1/8 1.9 1/4 3.6 (4) 220 360 1140 940 1 1310 1165 280 230 195 885 730 1110 1 1270 1130 250 280 855 705 575 1080 895 1 1235 1095 250 445 275 645 825 1045 875 735 1360 1 1060 800 1010 715 1310 1160 1020 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 120 Volt) 2.3 (4) 250 210 470 575 635 1115 925 1470 1 1195 270 190 875 1075 765 1 1 1160 240 270 470 845 705 1040 880 1 1265 1120 290 235 565 445 380 815 1005 860 1 1220 1080 785 970 1270 1170 1035 810 515 1025 870 735 1 1165 1035 765 975 825 690 1165 1115 985 750 525 935 805 1220 1115 985 635 995 1280 1125 990 735 935 1215 1070 940 715 900 765 640 1165 1060 935 740 960 1235 1085 940 705 890 765 1165 1020 895 860 1105 1005 875 635 890 1120 975 830 825 1055 930 780 765 965 870 Notes: 1. Motors are 120v/60Hz,high efficiency PSC type 2. Maximum HACR breaker is 15 amp 3. Coil fins-per-inch varies to allow consistent air flow 4. (4) The size 3 motor (models 3(P/R/C)(HBC) may not start on low speed due to low starting torque. These units must be wired to start on either Medium or High speed. -13-
BER PERFORMANCE PHBC 120 VOLT PSC MAX RPM PHBC (120 Volt) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 120 Volt) AMPS (120V) 3PHBC-3 1/20 1050.09 4PHBC-3 1/12 1050 1.1 5PHBC-3 1/12 1050 1.3 6PHBC-3 1/8 1.9 8PHBC-3 10PHBC-3 1/4 3.6 13PHBC-3 3PHBC-4 4PHBC-4 5PHBC-4 6PHBC-4 8PHBC-4 10PHBC-4 13PHBC-4 3PHBC-41 4PHBC-41 5PHBC-41 6PHBC-41 8PHBC-41 10PHBC-41 13PHBC-41 2.3 1/20 1050 0.9 1/12 1050 1.1 1/12 1050 1.3 1/8 1.9 1/4 3.6 FAN (4) 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 220 360 545 705 645 890 760 1165 1065 890 1 1255 1165 285 230 855 1130 1025 1 1210 1125 250 205 255 245 445 290 515 695 565 1095 990 840 1250 1170 1080 385 335 250 565 780 1060 955 815 1205 1120 1035 515 1020 1155 1075 985 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 120 Volt) 2.3 1/20 1050 0.9 1/12 1050 1.1 1/12 1050 1.3 1/8 1.9 1/4 3.6 (4) 290 245 215 380 695 870 1120 1035 1 1 1125 220 185 335 275 435 525 830 715 1075 1000 875 1255 1180 1080 230 285 435 1030 960 845 1210 1130 1035 290 645 990 920 815 1165 1080 990 720 945 880 780 1115 1035 945 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 120 Volt) 2.3 (4) 285 235 205 445 845 1015 890 770 1 1215 1120 250 210 180 280 250 810 975 855 740 1245 1165 1075 220 265 270 470 780 670 940 825 1195 1120 1025 335 750 640 900 1145 1065 975 515 470 715 765 1090 1015 930 975 875 765 1100 1025 930 390 840 750 1060 950 895 825 735 1035 960 885 670 565 930 735 1045 970 875 645 545 445 715 1005 935 845 640 785 600 975 880 980 940 880 750 845 785 360 785 855 600 690 435 670 Notes: 1. Motors are 120v / 60Hz,high efficiency PSC type 2. Maximum HACR breaker is 15 amp 3. Coil fins-per-inch varies to allow consistent air flow 4. (4) The size 3 motor (models 3(P/R/C)HBC) may not start on low speed due to low starting torque. These units must be wired to start on either Medium or High speed. -14-
BER PERFORMANCE RHBC 120 VOLT PSC MAX RPM RHBC (120 Volt) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 120 Volt) AMPS (120V) 3RHBC-3 1/20 1050.09 4RHBC-3 1/12 1050 1.1 5RHBC-3 1/12 1050 1.3 6RHBC-3 1/8 1.9 8RHBC-3 10RHBC-3 1/4 3.6 13RHBC-3 3RHBC-4 4RHBC-4 5RHBC-4 6RHBC-4 8RHBC-4 10RHBC-4 13RHBC-4 3RHBC-41 4RHBC-41 5PRHBC-41 6RHBC-41 8RHBC-41 10RHBC-41 13RHBC-41 2.3 1/20 1050 0.9 1/12 1050 1.1 1/12 1050 1.3 1/8 1.9 1/4 3.6 FAN (4) 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 220 360 545 705 645 890 1165 1065 890 1 1255 1165 285 230 855 1130 1025 1 1210 1125 250 205 255 245 445 290 515 695 565 1095 990 840 1250 1170 1080 385 335 250 565 780 1060 955 815 1 1120 1035 515 1020 1155 1075 985 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 120 Volt) 2.3 1/20 1050 0.9 1/12 1050 1.1 1/12 1050 1.3 1/8 1.9 1/4 3.6 (4) 290 245 215 380 695 870 1120 1035 1 1 1125 220 185 335 275 435 525 830 715 1075 1000 875 1255 1180 1080 230 285 435 1030 960 845 1210 1130 1035 290 645 990 920 815 1165 1080 990 720 945 880 780 1115 1035 945 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 120 Volt) 2.3 (4) 285 235 205 445 845 1015 890 770 1 1215 1120 250 210 180 280 250 810 975 855 740 1245 1165 1075 220 265 270 470 780 670 940 825 1195 1120 1025 335 750 640 900 1145 1065 975 515 470 715 765 1090 1015 930 600 975 875 765 1100 1025 930 390 840 750 1060 950 895 825 735 1035 960 885 670 565 930 735 1045 970 875 645 545 445 715 1005 935 845 640 785 600 975 880 980 940 880 750 845 785 360 785 855 600 690 670 655 Notes: 1. Motors are 120v / 60Hz,high efficiency PSC type 2. Maximum HACR breaker is 15 amp 3. Coil fins-per-inch varies to allow consistent air flow 4. (4) The size 3 motor (models 3(P/R/C)HBC) may not start on low speed due to low starting torque. These units must be wired to start on either Medium or High speed. -15-
BER PERFORMANCE HBC 277 VOLT PSC MAX RPM AMPS (277V) 3*HBC-3 1/20 1100 0.48 4*HBC-3 1/15 1050 0.52 5*HBC-3 1/15 1050 0.52 6*HBC-3 1/812 1 0.56 8*HBC-3 1/6 0.80 10*HBC-3 1/4 1 26 13*HBC-3 3*HBC-4 4*HBC-4 5*HBC-4 6*HBC-4 8*HBC-4 10*HBC-4 13*HBC-4 3*HBC-41 4*HBC-41 5*HBC-41 6*HBC-41 8*HBC-41 10*HBC-41 13*HBC-41 1/6 0.80 1/20 1100 0.48 1/15 1050 0.52 1/125 1050 0.52 1/12 1 0.56 1/6 0.80 1/4 1 26 1/6 HBC (277 Volt) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 277 Volt) FAN 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 245 180 575 335 720 1170 945 780 1 1380 1180 285 220 160 670 545 880 1140 920 1 1 1140 255 195 390 265 275 640 855 1105 900 730 1 1 1105 830 1070 875 705 1 1 1070 800 1035 1 1215 1030 765 995 655 1 1170 990 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 277 Volt) 0.80 1/20 1100 0.48 1/15 1050 0.52 1/15 1050 0.52 1/12 1 0.56 1/6 0.80 1/4 1 1.26 1/6 240 195 565 390 330 470 705 1140 770 1 1 1140 270 215 175 435 525 360 445 1100 890 1 1280 1110 380 265 270 635 515 805 1065 870 720 1 1245 1075 600 390 780 1025 845 695 1 1205 1040 575 360 990 670 1 1165 1005 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 277 Volt) 0.80 235 190 525 385 690 1100 940 770 1 1285 1130 265 210 160 360 285 830 1065 750 1 1245 1090 390 310 270 310 250 600 800 525 1030 870 730 1 1210 1050 575 380 995 845 1 1170 1005 545 740 575 470 950 1270 1125 970 545 435 330 445 950 640 1275 1120 965 515 705 545 900 645 1 1085 930 565 950 785 1 1125 945 290 670 1 1075 920 360 280 515 750 600 1175 1035 885 360 255 740 1245 1075 895 470 255 880 715 1170 1025 385 454 1120 985 840 1130 960 1050 1005 855 Notes: 1. Motors are 277v / 60Hz,high effciency PSC type 2. Maximum HACR breaker is 15 amp 3. coil fins-per-inch varies to allow consistent air flow -16-
BER PERFORMANCE PHBC 277 VOLT PSC MAX RPM PHBC (277 Volt) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 277 Volt) AMPS (277V) 3*PHBC-3 1/20 1100 0.48 4*PHBC-3 1/15 1050 0.52 5*PHBC-3 1/15 1050 0.52 6*PHBC-3 1/12 1 0.56 8*PHBC-3 1/6 0.80 10*PHBC-3 1/4 1 1.26 13*PHBC-3 3*PHBC-4 4*PHBC-4 5*PHBC-4 6*PHBC-4 8*PHBC-4 10*PHBC-4 13*PHBC-4 3*PHBC-41 4*PHBC-41 5*PHBC-41 6*PHBC-41 8*PHBC-41 10*PHBC-41 13*PHBC-41 1/6 0.80 1/20 1100 0.48 1/15 1050 0.52 1/15 1050 0.52 1/12 1 0.56 1/6 0.80 1/4 1 1.26 1/6 FAN 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 290 230 180 310 385 330 545 695 575 1040 885 1385 1250 1110 155 265 515 1000 1 1210 1070 310 640 525 960 810 655 1 1170 1030 565 760 920 780 635 1250 1130 990 470 885 1205 1085 945 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 277 Volt) 0.80 1/20 1100 0.48 1/15 1050 0.52 1/15 1050 0.52 1/12 1 0.56 1/6 0.80 1/4 1 1.26 1/6 280 230 185 380 330 825 670 1020 890 740 1335 1205 1075 255 160 255 640 980 855 1290 1170 1040 760 940 1245 1135 1000 1 1095 960 525 445 635 1155 1050 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 277 Volt) 0.80 275 185 515 805 990 875 735 1285 1170 1045 245 155 270 635 950 1240 1130 1010 280 235 385 740 805 1195 1090 975 575 885 1150 1050 940 1100 1005 895 445 720 1155 1040 900 390 830 1105 1000 870 640 815 715 1045 955 845 290 645 525 810 690 565 1100 985 280 695 1045 940 335 760 990 900 335 250 1040 930 800 240 750 985 875 765 215 690 925 840 735 645 730 Notes: 1. Motors are 277v / 60Hz,high effciency PSC type 2. Maximum HACR breaker is 15 amp 3. coil fins-per-inch varies to allow consistent air flow -17-
BER PERFORMANCE RHBC 277 VOLT PSC MAX RPM RHBC (277 Volt) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 277 Volt) AMPS (277V) 3*RHBC-3 1/20 1100 0.48 4*RHBC-3 1/15 1050 0.52 5*RHBC-3 1/15 1050 0.52 6*RHBC-3 1/12 1 0.56 8*RHBC-3 1/6 0.80 10*RHBC-3 1/4 1 1.26 13*RHBC-3 3*RHBC-4 4*RHBC-4 5*RHBC-4 6*RHBC-4 8*RHBC-4 10*RHBC-4 13*RHBC-4 3*RHBC-41 4*RHBC-41 5*RHBC-41 6*RHBC-41 8*RHBC-41 10*RHBC-41 13*RHBC-41 1/6 0.80 1/20 1100 0.48 1/15 1050 0.52 1/15 1050 0.52 1/12 1 0.56 1/6 0.80 1/4 1 1.26 1/6 FAN 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 290 230 180 310 385 330 545 695 575 1040 885 1385 1250 1110 155 265 515 1000 1 1210 1070 310 640 525 960 810 655 1 1170 1030 565 760 920 780 635 1250 1130 990 470 885 1205 1085 945 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 277 Volt) 0.80 1/20 1100 0.48 1/15 1050 0.52 1/15 1050 0.52 1/12 1 0.56 1/6 0.80 1/4 1 1.26 1/6 280 230 185 380 330 825 670 1020 890 740 1335 1205 1075 255 160 255 640 980 855 1290 1170 1040 760 940 1245 1135 1000 1 1095 960 525 445 635 1155 1050 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 277 Volt) 0.80 275 185 515 805 990 875 735 1285 1170 1045 245 155 270 635 950 1240 1130 1010 280 235 385 740 805 1195 1090 975 575 885 1150 1050 940 1100 1005 895 445 720 1155 1040 900 390 830 1105 1000 870 640 815 715 1045 955 845 290 645 525 810 690 565 1100 985 280 1045 940 335 760 990 900 335 250 1040 930 800 240 750 985 875 765 215 690 925 840 735 765 645 730 Notes: 1. Motors are 277v / 60Hz,high effciency PSC type 2. Maximum HACR breaker is 15 amp 3. coil fins-per-inch varies to allow consistent air flow -18-
BER PERFORMANCE HBC 220 VOLT/ 50Hz PSC MAX RPM AMPS (220V) 3*HBC-3 1/20 1075 0.40 4*HBC-3 1/12 1050 0.55 5*HBC-3 1/12 1050 0.55 6*HBC-3 2 8*HBC-3 2 10*HBC-3 1/4 1 3 13*HBC-3 3*HBC-4 4*HBC-4 5*HBC-4 6*HBC-4 8*HBC-4 10*HBC-4 13*HBC-4 3*HBC-41 4*HBC-41 5*HBC-41 6*HBC-41 8*HBC-41 10*HBC-41 13*HBC-41 2 1/20 1075 0.40 1/12 1050 0.55 1/12 1050 0.55 2 2 1/4 1 3 HBC (220 Volt / 50Hz) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 220 Volt) FAN 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 240 205 155 470 380 310 285 860 435 1080 1 1165 890 220 175 265 245 825 1025 815 645 1 1115 390 220 275 210 975 1 1070 830 335 250 750 735 1160 1020 715 860 1100 965 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 220 Volt) 2 1/20 1075 0.40 1/12 1050 0.55 1/12 1050 0.55 2 2 1/4 1 3 240 205 160 380 360 310 575 810 1015 875 730 1240 1085 860 215 180 265 245 765 965 840 695 1185 1035 830 390 275 575 385 805 1125 990 255 690 765 1065 930 310 815 720 1000 860 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 220 Volt) 2 235 160 280 805 985 875 715 1195 1060 210 170 255 240 760 940 690 1140 1010 805 290 220 380 720 390 895 1085 955 770 1025 900 720 385 645 960 830 265 635 1030 895 690 250 760 670 920 330 885 750 735 575 955 810 565 830 525 565 645 640 390 730 690 Notes: 1. Motors are 220v / 50Hz,high effciency PSC type 2. Maximum HACR breaker is 15 amp 3. coil fins-per-inch varies to allow consistent air flow -19-
BER PERFORMANCE PHBC 220 VOLT/ 50Hz PSC MAX RPM PHBC (220 Volt / 50Hz) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 220 Volt) AMPS (220V) 3*PHBC-3 1/20 1075 0.40 4*PHBC-3 1/12 1050 0.55 5*PHBC-3 1/12 1050 0.55 6*PHBC-3 2 8*PHBC-3 2 10*PHBC-3 1/4 1 3 13*PHBC-3 3*PHBC-4 4*PHBC-4 5*PHBC-4 6*PHBC-4 8*PHBC-4 10*PHBC-4 13*PHBC-4 3*PHBC-41 4*PHBC-41 5*PHBC-41 6*PHBC-41 8*PHBC-41 10*PHBC-41 13*PHBC-41 2 1/20 1075 0.40 1/12 1050 0.55 1/12 1050 0.55 2 2 1/4 1 3 FAN 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 230 195 150 275 270 920 825 1165 1050 855 160 380 240 230 750 640 1110 1000 815 335 265 390 810 730 1055 945 1000 890 730 275 635 935 825 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 220 Volt) 2 1/20 1075 0.40 1/12 1050 0.55 1/12 1050 0.55 2 2 1/4 1 3 190 150 275 330 270 785 1080 985 825 165 310 240 290 545 705 815 735 1020 930 785 330 275 770 695 965 870 740 810 280 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 220 Volt) 2 190 145 330 265 740 785 1030 950 800 195 160 215 285 445 390 800 735 975 895 170 380 575 920 705 360 705 635 860 575 470 330 655 705 860 760 285 760 525 600 545 715 240 670 545 Notes: 1. Motors are 220v / 50Hz,high effciency PSC type 2. Maximum HACR breaker is 15 amp 3. coil fins-per-inch varies to allow consistent air flow -20-
BER PERFORMANCE RHBC 220 VOLT/ 50Hz PSC MAX RPM RHBC (220 Volt / 50Hz) CFM vs EXTERNAL STATIC PRESSURE (3 ROW 220 Volt) AMPS (220V) 3*RHBC-3 1/20 1075 0.40 4*RHBC-3 1/12 1050 0.55 5*RHBC-3 1/12 1050 0.55 6*RHBC-3 2 8*RHBC-3 2 10*RHBC-3 1/4 1 3 13*RHBC-3 3*RHBC-4 4*RHBC-4 5*RHBC-4 6*RHBC-4 8*RHBC-4 10*RHBC-4 13*RHBC-4 3*RHBC-41 4*RHBC-41 5*RHBC-41 6*RHBC-41 8*RHBC-41 10*RHBC-41 13*RHBC-41 2 1/20 1075 0.40 1/12 1050 0.55 1/12 1050 0.55 2 2 1/4 1 3 FAN 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50 230 195 150 275 270 920 825 1165 1050 855 160 380 240 230 750 640 1110 1000 815 335 265 390 810 730 1055 945 1000 890 730 275 635 935 825 CFM vs EXTERNAL STATIC PRESSURE (4 ROW or 3/1 Split 220 Volt) 2 1/20 1075 0.40 1/12 1050 0.55 1/12 1050 0.55 2 2 1/4 1 3 190 150 275 330 270 785 1080 985 825 165 310 240 290 545 705 815 735 1020 930 785 330 275 770 695 965 870 740 235 810 280 CFM vs EXTERNAL STATIC PRESSURE (4/1 or 3/2 Split 220 Volt) 2 190 145 330 265 740 785 1030 950 800 195 160 215 285 445 390 800 735 975 895 170 380 575 920 705 360 705 635 860 575 470 330 655 705 860 760 285 760 525 600 545 715 240 670 545 Notes: 1. Motors are 220v / 50Hz,high effciency PSC type 2. Maximum HACR breaker is 15 amp 3. coil fins-per-inch varies to allow consistent air flow -21-
BER PERFORMANCE CHBC (ALL) PSC CHBC (120 Volt) (3 ROW 120 Volt) MAX RPM AMPS (120V) 3*CHBC-3 1/20 1050.09 4*CHBC-3 1/12 1050 1.1 5*CHBC-3 1/12 1050 1.3 6*CHBC-3 1/8 1.9 8*CHBC-3 10*CHBC-3 1/4 3.6 13*CHBC-3 3*CHBC-4 4*CHBC-4 5*CHBC-4 6*CHBC-4 8*CHBC-4 10*CHBC-4 13*CHBC-4 3*CHBC-41 4*CHBC-41 5*CHBC-41 6*CHBC-41 8*CHBC-41 10*CHBC-41 13*CHBC-41 2.3 (4 ROW or 3/1 Split 120 Volt) 1/20 1050 0.9 1/12 1050 1.1 1/12 1050 1.3 1/8 1.9 1/4 3.6 2.3 (4/1 or 3/2 Split 120 Volt) 1/20 1050 0.9 1/12 1050 1.1 1/12 1050 1.3 1/8 1.9 1/4 3.6 2.3 FAN CFM 245 210 730 920 750 1145 930 1 1 1160 280 230 195 885 730 1110 770 1 1270 1130 270 190 875 1075 900 765 1 1 1160 CHBC (277 Volt) (3 ROW 277 Volt) MAX RPM AMPS (120V) 3*CHBC-3 1/20 1100 0.48 4*CHBC-3 1/15 105 0.52 5*CHBC-3 1/15 1050 0.52 6*CHBC-3 1/12 1 0.56 8*CHBC-3 1/6 0.80 10*CHBC-3 1/4 1 1.26 13*CHBC-3 3*CHBC-4 4*CHBC-4 5*CHBC-4 6*CHBC-4 8*CHBC-4 10*CHBC-4 13*CHBC-4 3*CHBC-41 4*CHBC-41 5*CHBC-41 6*CHBC-41 8*CHBC-41 10*CHBC-41 13*CHBC-41 1/6 0.80 (4 ROW or 3/1 Split 277 Volt) 1/20 1100 0.48 1/15 1050 0.52 1/15 1050 0.52 1/12 1 0.56 1/6 0.80 1/4 1 1.26 6 0.80 (4/1 or 3/2 Split 277 Volt) 1/20 1100 0.48 1/15 1050 0.52 1/15 1050 0.52 1/12 1 0.56 1/6 0.80 1/4 1 1.26 1/6 0.80 FAN CFM 285 220 160 670 545 880 1140 920 1 1 1140 270 215 175 435 525 360 445 1100 890 1 1280 1110 265 210 160 285 830 1065 750 1 1245 1090 CHBC (220 Volt / 50Hz) (3 ROW 220 Volt / 50Hz) MAX RPM AMPS (120V) 3*CHBC-3 1/20 1075 0.40 4*CHBC-3 1/12 1050 0.55 5*CHBC-3 1/12 1050 0.55 6*CHBC-3 2 8*CHBC-3 2 10*CHBC-3 1/4 1 3 13*CHBC-3 3*CHBC-4 4*CHBC-4 5*CHBC-4 6*CHBC-4 8*CHBC-4 10*CHBC-4 13*CHBC-4 3*CHBC-41 4*CHBC-41 5*CHBC-41 6*CHBC-41 8*CHBC-41 10*CHBC-41 13*CHBC-41 2 FAN (4 ROW or 3/1 Split 220 Volt / 50Hz) 1/20 1075 0.40 1/12 1050 0.55 1/12 1050 0.55 2 2 1/4 1 3 2 (4/1 or 3/2 Split 220 Volt / 50Hz) 1/20 1075 0.40 1/12 1050 0.55 1/12 1050 0.55 2 2 1/4 1 3 2 CFM 175 125 265 245 825 1025 815 645 1 1115 180 130 265 245 765 965 840 695 1185 1035 830 175 125 255 240 760 940 690 1140 100 805-22-
BER PERFORMANCE HBCX 120V ECM 115V/1/60 ECM MOTOR HBCX SERIES (CONCEALED) - CFM vs ESP (3-ROW) AMPS/ 120V TAP 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * Green 330 280 250 220 * 4*HBCX-3 1/7 1.4 Orange 280 250 220 195 170 * Yellow 280 235 190 155 120 * * * White 690 670 635 600 * Green 635 * 6*HBCX-3 1/7 Orange 545 * Yellow 390 * Green 980 945 910 890 870 845 720 Orange 800 780 760 730 715 8*HBCX-3 1/2 4.6 Yellow 640 600 Red 470 360 White 1120 1105 1090 1075 1060 1040 1020 960 Green 1010 995 980 960 940 925 910 880 10*HBCX-3 1/2 4.6 Orange 830 810 765 740 720 Yellow 690 640 600 575 White 1380 1 1 1 1 1285 1270 1240 Orange 1180 1165 1150 1130 1110 1090 1070 1030 12*HBCX-3 1/2 6.2 Yellow 1080 1070 1060 1045 1030 1010 990 960 Red 1020 1000 980 960 940 925 910 880 ECM MOTOR 4*HBCX-4 6*HBCX-4 8*HBCX-4 10*HBCX-4 12*HBCX-4 115V/1/60 ECM MOTOR HBCX SERIES (CONCEALED) - CFM vs ESP (4-ROW or 3/1 SPLIT) AMPS/ 120V TAP 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * Green 330 280 250 220 * 1/7 1.4 Orange 280 250 220 195 170 * Yellow 280 235 190 155 120 * * * White 690 670 635 600 * Green 635 * 1/7 Orange 545 * Yellow 390 * Green 980 945 910 890 870 845 720 Orange 800 780 760 730 715 1/2 4.6 Yellow 640 600 Red 470 360 White 1120 1105 1090 1075 1060 1040 1020 960 Green 1010 995 980 960 940 925 910 880 1/2 4.6 Orange 830 810 765 740 720 Yellow 690 640 600 575 White 1380 1 1 1 1 1285 1270 1240 Orange 1180 1165 1150 1130 1110 1090 1070 1030 1/2 6.2 Yellow 1080 1070 1060 1045 1030 1010 990 960 Red 1020 1000 980 960 940 925 910 880 4*HBCX -41 6*HBCX -41 8*HBCX -41 10*HBCX -41 12*HBCX -41 115V/1/60 ECM MOTOR HBCX SERIES (CONCEALED) - CFM vs ESP (3/2 or 4/1 SPLIT) AMPS/ 120V TAP 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * Green 330 280 250 220 * 1/7 1.4 Orange 280 250 220 195 170 * Yellow 280 235 190 155 120 * * * White 690 670 635 600 * Green 635 * 1/7 Orange 545 * Yellow 390 * Green 980 945 910 890 870 845 720 Orange 800 780 760 730 715 1/2 4.6 Yellow 640 600 Red 470 360 White 1120 1105 1090 1075 1060 1040 1020 960 Green 1010 995 980 960 940 925 910 880 1/2 4.6 Orange 830 810 765 740 720 Yellow 690 640 600 575 White 1380 1 1 1 1 1285 1270 1240 Orange 1180 1165 1150 1130 1110 1090 1070 1030 1/2 6.2 Yellow 1080 1070 1060 1045 1030 1010 990 960 Red 1020 1000 980 960 940 925 910 880-23- In attempt to maintain CFM consistency, fins per inch (FPI) vary depending on coil rows and is reflected in CFM and capacity calculations INCLUDES 24V TRANSFORMER, LINE VOLTAGE TERMINAL BLOCK, VOLTAGE TERMINAL STRIP, IN FACTORY MOUNTED CONTROL BOX
BER PERFORMANCE PHBCX 120V ECM 115V/1/60 ECM MOTOR AMPS/ 120V 4*PHBCX-3 1/7 1.4 6*PHBCX-3 1/7 8*PHBCX-3 1/2 4.6 10*PHBCX-3 1/2 4.6 12*PHBCX-3 1/2 6.2 TAP PHBCX SERIES (PLENUM)- CFM vs ESP (3-ROW) 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * * Green 330 280 250 220 * * Orange 280 250 220 195 170 * * Yellow 235 190 155 120 * * * * White 670 635 600 * * Green 635 * * Orange 545 * * Yellow 390 * * Green 945 910 890 870 845 720 * Orange 780 760 730 715 * Yellow 640 600 * Red 470 360 * White 1105 1090 1075 1060 1040 1020 960 * Green 995 980 960 940 925 910 880 * Orange 810 765 740 720 * Yellow 640 600 575 * White 1 1 1 1 1285 1270 1240 * Orange 1165 1150 1130 1110 1090 1070 1030 * Yellow 1070 1060 1045 1030 1010 990 960 * Red 1000 980 960 940 925 910 880 * ECM MOTOR 115V/1/60 ECM MOTOR AMPS/ 120V 4*PHBCX-4 1/7 1.4 6*PHBCX-4 1/7 8*PHBCX-4 1/2 4.6 10*PHBCX-4 1/2 4.6 12*PHBCX-4 1/2 6.2 TAP PHBCX SERIES (PLENUM)- CFM vs ESP (4-ROW or 3/1 SPLIT) 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * * Green 330 280 250 220 * * Orange 280 250 220 195 170 * * Yellow 235 190 155 120 * * * * White 670 635 600 * * Green 635 * * Orange 545 * * Yellow 390 * * Green 945 910 890 870 845 720 * Orange 780 760 730 715 * Yellow 640 600 * Red 470 360 * White 1105 1090 1075 1060 1040 1020 960 * Green 995 980 960 940 925 910 880 * Orange 810 765 740 720 * Yellow 640 600 575 * White 1 1 1 1 1285 1270 1240 * Orange 1165 1150 1130 1110 1090 1070 1030 * Yellow 1070 1060 1045 1030 1010 990 960 * Red 1000 980 960 940 925 910 880 * 115V/1/60 ECM MOTOR AMPS/ 120V 4*PHBCX 1/7 1.4 6*PHBCX 1/7 8*PHBCX 1/2 4.6 10*PHBCX 1/2 4.6 12*PHBCX 1/2 6.2 TAP PHBCX SERIES (PLENUM)- CFM vs ESP (3/2 SPLIT) 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * * Green 330 280 250 220 * * Orange 280 250 220 195 170 * * Yellow 235 190 155 120 * * * * White 670 635 600 * * Green 635 * * Orange 545 * * Yellow 390 * * Green 945 910 890 870 845 720 * Orange 780 760 730 715 * Yellow 640 600 * Red 470 360 * White 1105 1090 1075 1060 1040 1020 960 * Green 995 980 960 940 925 910 880 * Orange 810 765 740 720 * Yellow 640 600 575 * White 1 1 1 1 1285 1270 1240 * Orange 1165 1150 1130 1110 1090 1070 1030 * Yellow 1070 1060 1045 1030 1010 990 960 * Red 1000 980 960 940 925 910 880 * In attempt to maintain CFM consistency, fins per inch (FPI) vary depending on coil rows and is reflected in CFM and capacity calculations INCLUDES 24V TRANSFORMER, LINE VOLTAGE TERMINAL BLOCK, VOLTAGE TERMINAL STRIP, IN FACTORY MOUNTED CONTROL BOX -24-
BER PERFORMANCE RHBCX 120V ECM ECM MOTOR 115V/1/60 ECM MOTOR AMPS/ 120V 4RHBCX-3 1/7 1.4 6RHBCX-3 1/7 8RHBCX-3 1/2 4.6 10RHBCX-3 1/2 4.6 12RHBCX-3 1/2 6.2 115V/1/60 ECM MOTOR AMPS/ 120V 4*RHBCX-4 1/7 1.4 6*RHBCX-4 1/7 8*RHBCX-4 1/2 4.6 10*RHBCX-4 1/2 4.6 12*RHBCX-4 1/2 6.2 TAP RHBCX SERIES (RECESSED) - CFM vs ESP (3-ROW) 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * * * Green 330 280 250 220 * * * Orange 280 250 220 195 170 * * * Yellow 190 155 120 * * * * * White 635 600 * * * Green * * * Orange * * * Yellow 390 * * * Green 910 890 870 845 720 * * Orange 760 730 715 * * Yellow 640 600 * * Red 470 360 * * White 1090 1075 1060 1040 1020 960 * * Green 980 960 940 925 910 880 * * Orange 765 740 720 * * Yellow 640 600 575 * * White 1 1 1 1285 1270 1240 * * Orange 1150 1130 1110 1090 1070 1030 * * Yellow 1060 1045 1030 1010 990 960 * * Red 980 960 940 925 910 880 * * TAP RHBCX SERIES (RECESSED) - CFM vs ESP (4-ROW or 3/1 SPLIT) 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * * * Green 330 280 250 220 * * * Orange 280 250 220 195 170 * * * Yellow 190 155 120 * * * * * White 635 600 * * * Green * * * Orange * * * Yellow 390 * * * Green 910 890 870 845 720 * * Orange 760 730 715 * * Yellow 640 600 * * Red 470 360 * * White 1090 1075 1060 1040 1020 960 * * Green 980 960 940 925 910 880 * * Orange 765 740 720 * * Yellow 640 600 575 * * White 1 1 1 1285 1270 1240 * * Orange 1150 1130 1110 1090 1070 1030 * * Yellow 1060 1045 1030 1010 990 960 * * Red 980 960 940 925 910 880 * * 115V/1/60 ECM MOTOR AMPS/ 120V 4*RHBCX 1/7 1.4 6*RHBCX 1/7 8*RHBCX 1/2 4.6 10*RHBCX 1/2 4.6 12*RHBCX 1/2 6.2 TAP RHBCX SERIES (RECESSED) - CFM vs ESP (3/2 SPLIT) 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 White 380 330 * * * Green 330 280 250 220 * * * Orange 280 250 220 195 170 * * * Yellow 190 155 120 * * * * * White 635 600 * * * Green * * * Orange * * * Yellow 390 * * * Green 910 890 870 845 720 * * Orange 760 730 715 * * Yellow 640 600 * * Red 470 360 * * White 1090 1075 1060 1040 1020 960 * * Green 980 960 940 925 910 880 * * Orange 765 740 720 * * Yellow 640 600 575 * * White 1 1 1 1285 1270 1240 * * Orange 1150 1130 1110 1090 1070 1030 * * Yellow 1060 1045 1030 1010 990 960 * * Red 980 960 940 925 910 880 * * In attempt to maintain CFM consistency, fins per inch (FPI) vary depending on coil rows and is reflected in CFM and capacity calculations INCLUDES 24V TRANSFORMER, LINE VOLTAGE TERMINAL BLOCK, VOLTAGE TERMINAL STRIP, IN FACTORY MOUNTED CONTROL BOX -25-
BER PERFORMANCE CHBCX 120V ECM 115V/1/60 ECM MOTOR CHBCX SERIES (EXPOSED) - CFM (3-ROW) AMPS/ 120V 4*CHBCX-3 1/7 1.4 6*CHBCX-3 1/7 8*CHBCX-3 1/2 4.6 10*CHBCX-3 1/2 4.6 12*CHBCX-3 1/2 6.2 TAP CFM White Green Orange Yellow 280 White 690 Green Orange Yellow Green 980 Orange 800 Yellow Red White 1120 Green 1010 Orange 830 Yellow 690 White 1380 Orange 1180 Yellow 1080 Red 1020 ECM MOTOR 115V/1/60 ECM MOTOR CHBCX SERIES (EXPOSED) - CFM (4-ROW or 3/1 SPLIT) AMPS/120V TAP CFM White Green 4*CHBCX-4 1/7 1.4 Orange Yellow 280 White 690 Green 6*CHBCX-4 1/7 Orange Yellow Green 980 Orange 800 8*CHBCX-4 1/2 4.6 Yellow Red White 1120 Green 1010 10*CHBCX-4 1/2 4.6 Orange 830 Yellow 690 White 1380 Orange 1180 12*CHBCX-4 1/2 6.2 Yellow 1080 Red 1020 115V/1/60 ECM MOTOR CHBCX SERIES (EXPOSED) - CFM (3/2 SPLIT) AMPS/120V TAP CFM White Green 4*CHBCX 1/7 1.4 Orange Yellow 280 White 690 Green 6*CHBCX 1/7 Orange Yellow Green 980 Orange 800 8*CHBCX 1/2 4.6 Yellow Red White 1120 Green 1010 10*CHBCX 1/2 4.6 Orange 830 Yellow 690 White 1380 Orange 1180 12*CHBCX 1/2 6.2 Yellow 1080 Red 1020 In attempt to maintain CFM consistency, fins per inch (FPI) vary depending on coil rows and is reflected in CFM and capacity calculations INCLUDES 24V TRANSFORMER, LINE VOLTAGE TERMINAL BLOCK, VOLTAGE TERMINAL STRIP, IN FACTORY MOUNTED CONTROL BOX -26-
GUIDE SPECIFICATIONS PART 1: GENERAL GUIDE SPECIFICATIONS 1 Section Includes A. Fan Coil Units 2 REFERENCES AMCA 99 Standards Handbook AMCA 210 -- Laboratory Methods for Testing Fans for Rating Purposes AMCA Test Code for Sound Rating Air Moving Devices ARI Room Fan-Coil Unit ASTMB117 Standard Practice for Operating Salt Spray Apparatus NEMA MGI Motors and Generators NFPA 70 National Electric Code SMACNA HVAC Duct Construction Standards Metal and Flexible UL 723 Test for Surface Burning Characteristics of Building Materials UL 900 Test Performance of Air Filter Units UL 1995 Standard for Heating and Cooling Equipment UL 94 Test for Flammability of Plastic Materials for Parts in Devices and Appliances 3 SUBMITTALS A. Shop drawings: Indicate assembly, unit dimensions, weight loading, required clearances, construction details, field connection details, and electrical characteristics and connection requirements. A computer generated capacity selection shall be submitted for each cooling coil with design points and final operating point clearly noted. B. Product Data: 1. Provide literature that indicates dimensions, weights, capacities, ratings, fan performance, finishes of materials, and electrical characteristics and connection requirements. 2. Provide data of filter media, filter performance data. 3. Manufacturer s installation instructions. 4 OPERATION AND MAINTENANCE DATA A. Maintenance Data: Include instructions for lubrication, filter replacement and motor and drive replacement. 5 QUALIFICATIONS A. Manufacturer: Company specializing in manufacturing the products specified in this section with a minimum 10 years documented experience, which issues complete catalog data on total product. 6 DELIVERY, STORAGE, AND HANDLING A. Accept products on site on factory-installed shipping skids. Inspect for damage. B. Store in clean dry place and protect from weather and construction traffic. Handle carefully to avoid damage to components, enclosures, and finish. -27-
GUIDE SPECIFICATIONS GUIDE SPECIFICATIONS (cont.) 7 ENVIRONMENTAL REQUIREMENTS A. Do not operate units for any purpose, temporary or permanent, until ductwork is clean, filters are in place, and fan has been test run under observation. PART 2: PRODUCTS 1 MANUFACTURERS A. The following manufacturers are approved for use. No substitutions will be permitted. 1. First Company, Dallas TX 2 CASING A. Unit shall have corrosion resistant casing consisting of galvanized steel panels. Unit panels shall be fully insulated with lb fiberglass insulation with anti-microbial agent. Removable panels shall provide full access to unit components. B. Drain pans shall be heavy gauge galvanized steel with an insulating coating. Optional stainless steel drain pan shall include an insulating coating. Drain pans shall be removable for cleaning or replacement without removing coils or disturbing coil connections. 3 SUPPLY FAN A. Provide DWDI forward-curved supply fans. Fan assemblies shall be statically and dynamically balanced by manufacturer. The housings are constructed from heavy gauge galvanized steel with die-formed inlet cones. B. Fan and motor mounting platform shall be a minimum of 12 gauge LFQ galvanized steel. 4 MOTORS A. Direct drive motors to be PSC or ECM type, permanently lubricated type with internal thermal overload protection and mounted with rubber isolation bushings. 5 ELECTRICAL A. Provide units with 115, 208-230, or 277V, 3-speed with 24v control transformer, and 15 amp service switch or optional ECM motor with 120/24V control transformer, 15 amp service switch, 4 speed taps. Controls to be factory mounted and tested. 7 COOLING AND HEATING COIL SECTIONS A. Provide access to coils for service and cleaning. B. Water Coils: fins shall have full drawn collars to provide a continuous surface cover over the entire tube for maximum heat transfer. Tubes shall be mechanically expanded into the fins to provide a continuous primary-to-secondary compression bond over the entire finned length for maximum heat transfer rates. Bare copper tube shall not be visible between fins. Coil tubes shall be seamless copper, expanded into fins, and brazed at joints. Coil connections shall be copper with sweat connection size to be determined by manufacturer based upon the most efficient coil circuiting. Manual air vent connections shall be provided at the highest point to assure proper venting. Coils shall be tested with pounds air pressure and suitable for psig working pressure. Coil casings shall be a formed channel frame of galvanized steel. 8 FILTERS A. Filter to be disposable type and media shall be UL 900 listed, Class I or Class II. PART 3: EXECUTION 1 INSTALLATION A. Install in accordance with manufacturer s instructions. -28-
ACCESS PANELS PART # *STANDARD PANEL OPTIONS FOR HBC SERIES UNIT SIZE PANEL TYPE 965 LOUVERED 3,4,5,6 965-1 SOLID 966 LOUVERED 8 966-1 SOLID 967 LOUVERED 10 967-1 SOLID 967-4 LOUVERED 12/13 967-5 SOLID Note * Filters not included FRAME DIMENSIONS *FILTER SIZE PART # *IAQ MERV 8 PANEL OPTIONS FOR HBC SERIES UNIT SIZE PANEL TYPE FRAME DIMENSIONS *FILTER SIZE 27-1/2 X 43 20X20X1 (1) 965-M8 3,4,5,6 LOUVERED 27-1/2 X 43 20X30X1 (1) 27-1/2 X 49 20X20X1 (1) 966-M8 8 LOUVERED 27-1/2 X 49 20X20X1 (2) 27-1/2 X 55-1/2 20X20X1 (1) 967-M8 10 LOUVERED 27-1/2 X 55-1/2 20X20X1 (2) 27-5/8 X 70-1/8 10X65X1 (1) 967-8M8 12/13 LOUVERED 27-5/8 X 70-1/8 20X30X1 (2) IAQ PANEL PERFORMANCE DATA (4) (Clean Filter) CFM 600 800 900 1000 1100 1 1 1 965-M8 with AF20301HV (20x030, Merv 8) Filters (2) 0.04 0.06 0.06 0.08 0.09 0.10 - - - - - - - - - - - - 966-M8 with AF20201HV (20x020, Merv 8) Filters (2) 0.04 0.06 0.06 0.08 0.09 0.10 - - - - - - - - - - - - 967-M8 with AF20201HV (20x020, Merv 8) Filters (2) - - - 0.05 0.05 0.07 0.08 0.10 - - - - - - - - - - - - 967-6-M8 with AF20251HV (20x025, Merv 8) Filters (2) - - - - - - - - - 0.05 0.06 0.07 0.08 0.09 - - - - - - 967-8-M8 with AF20301HV (20x30, Merv 8) Filters (2) - - - - - - - - - - - - - - - 0.06 0.06 0.08 0.08 0.10 Notes: (1) The above is the actual laboratory test data or these panels. (2) Glassfloss Industries HV series Merv 8 filters were used to generate above data (filters must be field supplied) (3) Alternate Merv 8 filters would be acceptable provided they have equal or less resistance. (4) Refer to fan coil specification sheets for fan coil blower data. -29-
ACCESSORIES T - Manual Changeover with 3 speed fan switch T421 - Auto Changeover with 3 speed fan switch T - Manual Changeover with Digital Display with Auto Speed Fan Switch T201 - **Auto Changeover Digital Display with Auto Speed Fan Switch T - Manual Changeover Digital Display, Single Speed Fan 3-Speed Fan Switching 3-Speed Fan Switching THERMOSTATS SINGLE THERMOSTATS 1-Speed Fan (on-auto) HEAT-OFF-COOL System Switch Accepts 24 to 277 VAC., 50 or 60 Hz Maximum Ambient: 130 o F Optional Remote Thermistor Probe Set Point Range: 50 to 90 o F Agency Approvals: UL, UL Canada CE Mounting: Installs to a standard 2 x 4 devise box HEAT/COOL System Switch, Manual or Auto 3-Speed Fan switch with Auto Speed Feature Separate On-Off Switch 18-30 VAC, 50/60 Hz Temperature Accuracy: + 1.8 o F Ambient Teperature: 50-122 o F Set Point Range: 64-88 o F HEAT-OFF-COOL System Switch Manual Changeover 18-30 VAC, 50/60 Hz Temperature Accuracy: + o F Ambient Temperature: 14 o to 140 o F Set Point Range: 45-90 o F DC Power: Volt DC (2 AA Alkaline batteries included) T832 7-Day Programmable 1 heat, 1 cool, Single Speed, Touch Screen display, C7189 Remote sensor available T4071 5/8 T4072 7/8 Auto Changeover Requires Aguastat (2-pipe applications) 1-Speed Fan (On-Auto) HEAT-OFF-COOL-AUTO Fan Options: Auto-on Circ 20-30 Vac, 50/60 Hz Ambient Temperature: 0 o to 120 o F Set Point Range: Clg. 50 o F to 99 o F Htg. 40 o f to 90 o F Powering methods: Battery only Common wire only Common wire with battery backup Strap-on Aquastat 5/8 O.D. Tubing 10 amps induction 60 amps locked rotor 25 amps resitive Temperature Changes at 95 o F + 10 o F Resets at 65 o F + 5 o F -30-
ACCESSORIES 3- ROTARY SWITCH W/OFF POSITION NO OFF POSITION E332 E332-1 Resistive Load (Switching Capacity) Rating 10 Amps at 125 VAC 5 Amps at 250/277 VAC Inductive (Motorload) Ratings 1/4 at 125/277 VAC 1/2 at 250 VAC Standard Switch and Shaft Dimensions 2 x 1-1/2 x 11/16 3/16 Square Shaft with 13/32 Extension 15/32 Double D 32 Threaded Bushing with 1/4 Extension 6-1/2 Long Leads WALL MOUNT 3- SWITCH 3- SWITCH ON/OFF WALL MOUNT T422 OPTIONAL SERVICE SWITCH (15 AMP) Voltage Part # 2 x 4 Service Switch 120/1/60 945-6 Toggle Switch 15 Amp 240/1/60 945-7 Single Pole 277/1/60 945-7 2 X 4 J-Box 220/0 945-7 Resistive Load (Switching Capacity) Rating 6 Amps at 125 VAC 5 Amps at 240 VAC 4.2 Amps at 277 VAC Inductive (Motorload) Ratings 1/4 at 125/277 VAC 1/2 at 250 VAC Horizontal mount with manual on/off switch and manual three speed fan switch. Operation with system switch in on position, fan operation is continuous, can be set at one of three speeds. With system switch in off position, all outputs are off. 2 X 4 Switch Cover - Galvanized Steel SINGLE FAN (24V Control Circuit) Voltage Part # Relay Transformer Assembly 120/1/60 310-E301 30 Amp, single pole, normally open, 24v coil 240/1/60 310-E302 18 GA. 4.25 X 4.25 mounting plate 277/1/60 310-E303 Factory assembled and wired 220/0 310-E302 THREE FAN (24V Control Circuit) Multi-24 FACTORY MOUNTED OPTION ONLY 3- CONTROL OPTION FOR HBC SERIES FAN COILS FACTORY MOUNTED CONTROLS INCLUDE CB RELAY BOARD, 24V TRANSFORMER, (15 AMP) SERVICE SWITCH -
ACCESSORIES ACTUATOR VALVE PACKAGES AND ACCESSORIES ACTUATOR MATERIALS 2-POSITION BASE POLYCARBONATE APPROVALS (ON-OFF) 50/60HZ COVER POLYCARBONATE UL VOLTAGE PART # BASE PLATE ALUMINUM Cul CE 24V E50131180 LEAD LENGTH 6 - (24V 18 ) 120/1/60 E50132180 POWER REQUIREMENTS W, 7 VA 240/1/60 E50138180 AMBIENT TEMPERATURE RANGE 32 TO 170 F 277/1/60 E50137180 2-Way MICRO SWITCH 5 A, 250 V 220/0 E50138180 Valve and Actuator HUMIDITY 95% NON-CONDENSING VALVE BODY MATERIALS VALVE BODIES (2-POSITION) BODY BRASS E43XXXX 3-WAY E42XXXX 2-WAY STEM TWO O-RINGS SEALS PADDLE FLUID STAINLESS STEEL EPDM EPDM MAXIMUM % OF GLYCOL 50% WATER/GLYCOL TEMPERATURE RANGE 32 TO 240 VALVE PACKAGE ACCESSORIES MAXIMUM STATIC PRESSURE PSI Automatic Fixed Flow Control Manual Adj. Flow Setter SWEAT CONNECTION 1/2, 3/4, 1 1/2 3/4 1/2 3/4 Connection Size F CHARACTERISTICS CP654XXXXX CP655XXXXX CP601 CP6011 Flow Coefficient Maximum Close-Off Pressure AP PETE S PLUG Requires CP6025 CP61712 1/2 Cv 75 Ball Valves (Sweat) 1/2 Full Port (T-Handle) Y-Strainer (Sweat) Cv 50 3/4 1/2 3/4 1 1/2 3/4 1/2 3/4 3/4 1 3/4 1 3.5 Cv 30 5 Cv 25 7.5 Cv 20 1 8 Cv 20 CP-9 CP-90 CP- CP603 CP6031 EXTENDED DRIP LIPS 919-1 15 919-1X1ss 15 919-1EXT 19 STANDARD VALVE PACKAGE FACTORY MOUNTED 2-POSITION (ON-OFF) 2-WAY 9VH*22BM WITH 2-BV S 3-WAY 9VH*23BM WITH 2-BV S -