Building Winners and Champions One Race at a Time!
About Us Genesis Shocks is located in Roswell, Georgia 30 miles north of Atlanta. Founded by Mike Farr and Mike Lutz in March of 2006, Genesis is a new company but the founders are anything but new to the shock absorber and racing industries, with over 50 years experience between them. We are building shock absorbers that drivers can use with confidence without having to dyno everything. We can satisfy racer s needs with easy to understand and easy to use products that are also gentle on their budgets. At Genesis, quality and consistency come in first so you can too. Genesis Racing Shocks has been racking up the wins since its inception. GENESIS NUMBERING SYSTEM G1C 7 3-5 L G1 = G2 = G3 = G4 = G1C = G2C = G3C = Shock Series Aluminum Non-Adjustable with Integral Air Chamber Aluminum Single Adjustable with Integral Air Chamber Aluminum Double Adjustable with Integral Air Chamber Aluminum Triple Adjustable with Remote Adjuster Air Chamber G1 with Remote Air Chamber G2 with Remote Air Chamber G3 with Remote Air Chamber Stroke 5, 6, 7, 8, 9 Valving Any Combination 0 thru 12 First Number is COMPRESSION Second Number is REBOUND Split Valves are HYPHENATED Half Valves are NOT available as splits. Half Valves are NOT HYPHENATED Suffixes No Suffix = Digressive Damping L = Linear Damping D = Adjustable Dirt Track A = Adjustable Asphalt Track Genesis Shocks LLC 678-659-9454 Fax - 678-659-9457 WWW.GenesisShocks.com E-mail info@genesisshocks.com
Non Adjustable Shock Absorbers The G1 is a mono-tube, non adjustable gas shock absorber. It s available in 5-6 - 7 and 9 stroke and any possible valving or split valving. It has a fully anodized aluminum body with a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke. G1 -- Features * Positive stainless steel no-drag scraper to keep any dirt and debris out. * Hollow chrome-moly shaft. * The finest High quality, High viscosity sit index shock absorber oils. * Low friction Teflon lined self lubricating 1/2 inch bearing on both ends. * Proprietary Dynamic Gas Pressure Control, keeps pressure low while supporting compression valve values. * Double checked low-speed valving design with ±.00004 precision components. The G1 is completely re-buildable, repairable and upgradable to the G2 Single adjustable or G3 Double adjustable. xxxxx- Series Extended Length Compressed Length Travel Weight G1-5 15 3/8 inch 10 3/8 inch 5 inch #2.4 G1-6 17 3/8 inch 11 3/8 inch 6 inch #2.6 G1-7 19 3/8 inch 12 3/8 inch 7 inch #2.8 G1-9 23 3/8 inch 14 3/8 inch 9 inch #3.2 www.genesisshocks.com ww.g w.ge ss
G1 Series Non Adjustable Absorber Dirt Track Set-Up Dirt Late Models Barry Wright - GRT Front G173-5 G174-5 Front G173-5 G174-5 Front G175-3 G173-5 5th coil G173-5 5th coil G173-5 5th coil G173-5 Rear G193-5 G194-5 Rear G193-5 G194-5 Rear G195-3 G193-5 Mastersbilt & Warrior Front G173-5 G174-5 Front G173-5 G174-5 Front G173-5 G174-5 5th coil G173-5 5th coil G174-5 5th coil G173-5 Rear G193-5 G194-5 Rear G194-5 G194-5 Rear G193-3 G193-5 Rayburn - Swing Arm Front G173-5 G173-5 Front G173-5 G174-5 Front G173-5 G173-5 Rear G193-5 G193-5 Rear G194-5 G194-5 Rear G195-3 G193-5 Rocket, Larry Shaw & Swartz Front G173-5 G174-5 Front G173-5 G174-5 Front G175-3 G173-5 5th coil G173 5th coil G173-5 5th coil G173-5 Rear G193-5 G194-5 Rear G194-5 G194-5 Rear G195-3 G193-5 Dirt Late Model Tuning tips We highly recommend that you check with your chassis builder for their latest recommendations as technology changes very frequently. Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a G194-0 or G194-1 for Sweeping corner tracks and G196-0 or a G196-2 for tighter corner tracks. Adjust your gas pressure accordingly anywhere from 50 psi to 200 psi. Always check the travel on all shocks for rebound extension and compression travel as some cars need a 1 or 2 shock extensions in some applications. Note on some cars the right front upper control arm will hit the shock or bulb. If more control arm clearance is needed, order your right front shock with a 5350 small diameter bulb. (G1S7#-# Shock). Phone 678-659-9454
Shock s Dirt Modifieds Average Track Heavy Track Front G173-4L G173-4L Front G174-5L G174-5L Rear G194-5L G194-5L Rear G195-6L G195-6L Slick Track * Syracuse or 1 Mile Track Front G173-4L G173-4L Front G174-6L G174-5L Rear MLR-Slick G193-5L Rear MR-SYR MR-SYR All Dirt Modified shocks are valved as Linear valving unless specified otherwise. Also available in the G1 series are standard valvings like G175, G176, G194 and G195 and so on. Winged Sprint Cars - Dirt Front G173-5 G174-5 Front G173-5 G174-5 Front G173-5 G173-5 Rear G193-5 G193-5 Rear G193-5 G194-5 Rear G193-5 G193-5 Non-Wing Sprint Cars - Dirt Front G173-5 G174-5 Front G173-5 G174-5 Front G173-5 G173-5 Rear G193-5 G194-5 Rear G194-5 G194-5 Rear G193-3 G192-5 Silver Crown Sprint - Dirt Front G173-5 G173-5 Front G173-5 G174-5 Front G173-5 G173-5 Rear G193-5 G193-5 Rear G194-5 G194-5 Rear G195-3 G192-5 Midget - Dirt Front G173-5 G174-5 Front G173-5 G174-5 Front G175-3 G173-5 Rear G193-5 G194-5 Rear G194-5 G194-5 Rear G195-3 G193-5 3500 Coil over kit is required for coil over applications. We highly recommend that you check with your chassis builder for their latest recommendations as technology changes very frequently. Always check the travel on all shocks for rebound extension and compression travel as some cars need a 1 or 2 shock extensions in some applications. Also available in the G1 series are standard valvings like G175, G176, G194 and G195 and so on. Optional shocks for left rear - G173-5, G173-6 and G174. All Genesis Shocks have Schrader valves so you can adjust the gas pressure. You can run anywhere from 30 psi up to 200 psi. Always use Nitrogen or air that is run thru a Cam Air system. All of the recommendations are starting points and are race proven and have Won races. www.genesisshocks.com
Phone 678-659-9454 G1 Series Non Adjustable Shock Absorber Asphalt Track Set-Ups Asphalt (NASCAR Type) Modifieds Front G155-6 G155-7 Front G155-7 G155-7 Rear G174-6 G174 Rear G174-6 G175 Optional shocks for left rear - G173-5, G173-6 and G174. Asphalt Late Models Front G174-6 G175-6 Front G174-5 G176 Rear G174 G175 Rear G174-5 G175 Asphalt Late Model Stock Front G175 G176 Front G174-5 G175-6 Rear G174 G175 Rear G174 G175 Soft Spring Big Bar combination requires more information... Call. Midget - Asphalt Front G173-5 G174 Front G173-6 G174 Rear G173-5 G174 Rear G173-6 G174 Sprint Cars - Asphalt Front G174-6 G175-6 Front G174-5 G176 Rear G174 G175 Rear G174-5 G175 Silver Crown Sprint - Asphalt Front G175 G176 Front G174-5 G175-6 Rear G174 G175 Rear G174 G175
Shock Accessories Coil Over Kits 3500 - Coil Over Kit The Genesis 3500 kit includes the 3001 TwistSeat cone and the 3000 spring nut. 3001 - The Genesis TwistSeat cone The Genesis 3001 TwistSeat cone spring seat features a unique twist-on feature available only from Genesis. Always centered and secure. No clips or pins. 3001 The Genesis 3000 spring seat nut The Genesis 3000 spring seat nut is drilled for a spanner wrench, indexed in two separate areas and locks in place using only a wire tie. 3000 Shock Extensions 3010-1 Shock Extensions 3020-2 Shock Extensions The Genesis shock extension is machined from high strength billet aluminum and anodized black with a 1 hex for tightening. 3700 - Spring Connector Sleeve The Genesis 3700 spring connector sleeve for double spring set-ups. 3750 - Bird Cage Shock Clevis The Genesis 3750 bird cage shock clevis fits most bird cages and eliminates binding of the shocks on the rear. 3900 - Gas Filler Tool w/ 0 to 160 Gauge The Genesis 3900 gas filler tool is black anodized billet aluminum and has a liquid filled gauge with a range of 0-160 PSI. 3920 - Gas Filler Tool w/ 0 to 200 Gauge The Genesis 3920 gas filler tool is black anodized billet aluminum and has a liquid filled gauge with a range of 0-200 PSI. 3960 - Gas Filler Tool w/ 0 to 60 Gauge The Genesis 3900 gas filler tool is black anodized billet aluminum and has a liquid filled gauge with a range of 0-60 PSI. 3010 3700 3020 3750 3900, 3920, 3960 www.genesisshocks.com
GenesisShocks.com 678-659-9454 - Fax 678-659-9457 Genesis Shocks 5020 Old Ellis Point - Suite 200 Roswell, Georgia 30076