T A B L E O F C O N T E N T S A R C H I T E C T U R A L WA L L L U M I N A I R E S E R I E S WL700R - Wall Luminaire with Open Faceplate G2.1 WL730R - Wall Luminaire with Cross Bar G2.2 WL755R - Wall Luminaire with Half Lid G2.3 WL762R - Wall Luminaire with Angled Louvers G4.4 - Remote Ballast Information G4.8
WL700R Wall Luminaire with Open Faceplate Required Wall Recessed Opening: DIA : 7'' Depth: 3'' Applications: Recessed Wall Luminaire designed for commercial, architectural, and residential installation. Designed to conform to the architectural requirements for low mounting heights for the illumination of steps, stairways, walkways, aisles, ramps and other indoor and outdoor applications. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish. Includes an integral wiring compartment and silicone gasket. One (1) 7/8" diameter hole provided for 1/2" trade size conduit. Faceplate: Round open one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-translucent white coated tempered glass lens. Faceplate is secured to housing by three (3) tamper resistant, stainless steel screws. Electrical: Low Voltage (12V) Lampholder: S11 (25W) Single contact bayonet base (SC Bay) with ceramic insulator and high temperature leads. Finish: Powder coat. Standard color in black, white or natural aluminum finish. 2007.4.2 Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. ADA compliant and suitable for installation within 4 feet of ground. ORDERING Example : WL700R/S1125/RMT/B Recessed WL700R / Lamp / Volt / Lamp Description Lumen Base Bulb Finish Low Voltage 25W S11 360 SC Bay S11 S1125 Compact Fluorescent 5W PL 265 G23 2 Pin PL5 120 277 RMT B N W Black Natural White Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com Product specifications subject to change without notice. : ADA compliant fixture G2.1
WL730R Wall Luminaire with Cross Bars Required Wall Recessed Opening: DIA : 7'' Depth: 3'' Applications: Recessed Wall Luminaire designed for commercial, architectural, and residential installation. Designed to conform to the architectural requirements for low mounting heights for the illumination of steps, stairways, walkways, aisles, ramps and other indoor and outdoor applications. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish. Includes an integral wiring compartment and silicone gasket. One (1) 7/8" diameter hole provided for 1/2" trade size conduit. Faceplate: Round cross bar one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-translucent white coated tempered glass lens. Faceplate is secured to housing by three (3) tamper resistant, stainless steel screws. Electrical: Low Voltage (12V) Lampholder: S11 (25W) Single contact bayonet base (SC Bay) with ceramic insulator and high temperature leads. Finish: Powder coat. Standard color in black, white or natural aluminum finish. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. ADA compliant and suitable for installation within 4 feet of ground. 2007.4.2 ORDERING Example : WL730R/PL5/120/N Recessed WL730R / Lamp / Volt / Lamp Description Lumen Base Bulb Finish Low Voltage 25W S11 360 SC Bay S11 S1125 Compact Fluorescent 5W PL 265 G23 2 Pin PL5 120 277 RMT B N W Black Natural White Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com G2.2 : ADA compliant fixture Product specifications subject to change without notice.
WL755R Wall Luminaire with Half Lid 2007.4.2 Required Wall Recessed Opening: DIA : 7'' Depth: 3'' Applications: Recessed Wall Luminaire designed for commercial, architectural, and residential installation. Designed to conform to the architectural requirements for low mounting heights for the illumination of steps, stairways, walkways, aisles, ramps and other indoor and outdoor applications. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish. Includes an integral wiring compartment and silicone gasket. One (1) 7/8" diameter hole provided for 1/2" trade size conduit. Faceplate: Round anti-glare one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-translucent sandblasted tempered glass lens. Faceplate is secured to housing by three (3) tamper resistant, stainless steel screws. Electrical: Low Voltage (12V) Lampholder: S11 (25W) Single contact bayonet base (SC Bay) with ceramic insulator and high temperature leads. Low Voltage (12V) Lampholder: GU5.3 base. Halogen porcelain bi-pin lampholder with stainless steel contacts and high temperature leads. - LED, Two (2), 1.2W each (2 Watt Power Consumption), 6V - 24V (Included). Colors: White, Red, Blue, Green, Amber. LED Lamp Life: up to 100,000 hrs. Beam Spread Filter Included: 4. Available Beam Spread Filters: 2 (DP0028/P2), 4 (DP0028/P3), 10 (DP0028/P4), 16 (DP0028/P5), 25 (DP0028/P6), 50 (DP0028/P7), 80 (DP0028/P8), 10 x 60 (DP0028/P9), 2 x 70 (DP0028/P10). Step Down Transformer (included): Electronic, HPF, 120V 60Hz or 277V 50/60Hz. (min. start temp. -10 C). Finish: Powder coat. Standard col or in black, white or natural aluminum finish. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. ADA compliant and suitable for installation within 4 feet of ground. ORDERING Example : WL755R/BG21A/RMT/W Recessed WL755R / Lamp / Volt / Lamp Description Lumen Base Bulb Low Voltage (2) LED - Amber 86 GU5.3 LED BA21A 120 B (2) LED - Blue 8 GU5.3 LED BB21A 277 N (2) LED - Green 34 GU5.3 LED BG21A RMT W (2) LED - Red 70 GU5.3 LED BR21A (2) LED - White 72 GU5.3 LED BW21A 25W S11 360 SC Bay S11 S1125 Compact Fluorescent 5W PL 265 G23 2 Pin PL5 Finish Black Natural White Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com Product specifications subject to change without notice. : ADA compliant fixture G2.3
WL762R Wall Luminaire with Angled Louvers ORDERING Example : WL762R/BR21A/120/W Recessed WL762R / Lamp / Volt / Finish Lamp Description Lumen Base Bulb Low Voltage (2) LED - Amber 86 GU5.3 LED BA21A 120 B Black (2) LED - Blue 8 GU5.3 LED BB21A 277 N Natural (2) LED - Green 34 GU5.3 LED BG21A RMT W White (2) LED - Red 70 GU5.3 LED BR21A (2) LED - White 72 GU5.3 LED BW21A 25W S11 360 SC Bay S11 S1125 Compact Fluorescent 5W PL 265 G23 2 Pin PL5 Required Wall Recessed Opening: DIA : 7'' Depth: 3'' Applications: Recessed Wall Luminaire designed for commercial, architectural, and residential installation. Designed to conform to the architectural requirements for low mounting heights for the illumination of steps, stairways, walkways, aisles, ramps and other indoor and outdoor applications. Housing: Constructed of a one piece high grade die cast aluminum with a powder coat finish. Includes an integral wiring compartment and silicone gasket. One (1) 7/8" diameter hole provided for 1/2" trade size conduit. Faceplate: Round angled louver one-piece high grade die cast aluminum with a high corrosion-resistant powder coat finish and semi-translucent white coated tempered glass lens. Faceplate is secured to housing by three (3) tamper resistant, stainless steel screws. Electrical: Low Voltage (12V) Lampholder: S11 (25W) Single contact bayonet base (SC Bay) with ceramic insulator and high temperature leads. Low Voltage (12V) Lampholder: GU5.3 base. Halogen porcelain bi-pin lampholder with stainless steel contacts and high temperature leads. - LED, Two (2), 1.2W each (2 Watt Power Consumption), 6V - 24V (Included). Colors: White, Red, Blue, Green, Amber. LED Lamp Life: up to 100,000 hrs. Beam Spread Filter Included: 4. Available Beam Spread Filters: 2 (DP0028/P2), 4 (DP0028/P3), 10 (DP0028/P4), 16 (DP0028/P5), 25 (DP0028/P6), 50 (DP0028/P7), 80 (DP0028/P8), 10 x 60 (DP0028/P9), 2 x 70 (DP0028/P10). Step Down Transformer (included): Electronic, HPF, 120V 60Hz or 277V 50/60Hz. (min. start temp. -10 C). Finish: Powder coat. Standard col or in black, white or natural aluminum finish. Listing: UL / ETL Listed, suitable for wet locations and for all types of constructions including poured concrete. ADA compliant and suitable for installation within 4 feet of ground. 2007.4.2 Codes Architects Choice: Most visually appealing fixture based on lamp type. Highest Efficacy: Maximum light output per Watt (Lumen/Watt) RMT - Remote ballast Option (see back cover) Tel:888.458.6368 Los Angeles, CA www.lumenton.com G2.4 : ADA compliant fixture Product specifications subject to change without notice.
ELECTRICAL BOX for REMOTE BALLAST R E M O T E B A L L A S T I N F O R M AT I O N REMOTE BALLAST Applications: For remote High Intensity Discharge (HID) or Compact Fluorescent (CF) ballasts. Common uses are fixtures designed for remote ballast, multiple fixtures running off one ballast or a centralized electrical input location for all remote ballasts. For use on top of buildings, walls, and in ground for both indoor and outdoor locations. RAG: ABOVE GROUND ELECTRICAL BOX for REMOTE BAL BOX for REMOTE BALLAST Ballast Box Enclosure: Made from aluminum ELECTRICAL (powder coat), galvanized steel, or fiberglass. Silicone/polyurethane gasket used to seal cover. Trade size conduit holes/threaded (1/2 or 3/4) for wire/cord exit. Ballast box secured to the mounting surface by screws/bolts (by other). Please consult factory for ballast box enclosure type used for your application. (Remote Above Ground): Ballast box located horizontal above mounting surface. Options: B = Remote Ballast Only (All Remote Ballasts) RIG: IN GROUND M = Remote Ballast with Emergency Ballast (CF only) Volts (See Fixture Specification) Lamp (See Fixture Specification) Note: See fixture specifications for Remote Ballast Box Max. distance to lamp. Finish: Powder coat. Standard colors in black (Aluminum housing). Listing: UL / ETL Listed, suitable for wet locations. (Remote In Ground): RWS Ballast box located in ground. WALL SURFACE RWS: WALL SURFACE ORDERING / Remote Type Above Ground In Ground Wall Surface Remote Type Remote Ballast (Only) Remote Ballast & Emergency Ballast (CF) Options Options Volts Lamps RAG RIG RWS Volts (See Fixture Specifications) Lamps (See Fixture Specifications for more lamp codes) B M UNV 120 277 PL9 PL13 PL18 PL26 PL32 PL42 PL57 PL209 PL213 PL218 PL226 PL232 ORDERING EXAMPLES 1.RAGB120PL32 2.RAGM277PL32 = = Remote Ballast, 120V input, CF 32 Watt Lamp Remote Ballast, Emergency Ballast (120V) input, CF 32 Watt Lamp (Remote Wall Surface): Ballast Box located vertically on mounting surface. RWS WALL S