BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY ALUMINIUM CABLE LADDER CABLE TRUNKING PRODUCT CATALOGUE Electrical Cable Containment REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY 1
Who we are Founded in 2005 by Directors Hayden Froggatt and John Almond, MSS Ltd is an innovative and forward thinking company, supplying and installing cable containment systems to the electrical and mechanical sectors. Experience, sound product knowledge and practised efficiency means MSS can provide you with the best and most cost effective solution for your needs. MSS is accredited under the ISO 9001 for quality management systems and ISO 18001 for safety management systems. What we do Cable Ladder/Cable Tray/Cable Basket/Metal Framing Systems/Solid Trunking and Skirting Duct Systems/Pipe Supports/Seismic Design and Supply/Installation/Bespoke Fabrication Why MSS We are specialists in: Cable & Pipe Support System Mechanical & Electrical Installations Design/Engineering/Supply/Installation Specialised Mechanical Installations Skirting & Power Duct Interior Fitouts Special Fabrication and Engineering We can design, engineer, manufacture and install to your specifications providing you with quality products, on time and within budget. General and Bespoke Fabrication Our main focus is on light to medium steel fabrication, with an emphasis on small production runs and one-off high end bespoke works. Our scope and skill set is broad due to a wide range of the latest technology available in-house including the latest in automated plant and equipment. We regularly update our capital equipment to ensure jobs are executed to the highest standard, on time and within budget. Our highly trained team of Designers, Fabricators and Welders pride themselves on delivering precision design and engineering in Aluminium, Steel and Stainless Steel. MECHANICALSUPPORT.CO.NZ Mechanical Support Systems. Mechanical 0508 Support 0508 CABLE Systems CABLE reserves TRAY the TRAY right to SALESINFO@MECHANICALSUPPORT.CO.NZ change designs and specifications without notice.
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R INDEX Cable Tray: Cable Trunking: Page Cable Tray 2 Splice Plate 3 Bolts and Nuts 4 Hold Down Washer 4 Hold Down Bracket 5 Link Plate 6 Radius Plate Pressing 7 Tee Bracket 8 Divider Strip 9 Hanger Bracket 10 Page Trunking Body & Lid 25 Cable Trunking Joiners 26 Horizontal Bend - Lid On Top 27 Vertical Bend - Lid on Outside 28 Vertical Bend - Lid on Inside 29 Horizontal Bend - Lid On Inside 29 Horizontal T-Section - Lid On Top 30 Horizontal T-Section - Lid On Outside 31 Horizontal Bend - Lid On Outside 31 Horizontal T-Section - Lid On Inside 32 4-Way Cross Section 33 Flange Adaptor 34 Aluminium Cable Ladder: Twist Adaptor 35 End Cap 36 Page NEMA Aluminium Cable Ladder 12-13 Splice Plate 14 Bolts and Nuts 14 Internal Hold Down Washer 15 External Hold Down Bracket 15 Adjustable Vertical Elbow 16 Adjustable Horizontal Hinge 16 90 Horizontal Bend 17 45 Horizontal Bend 17 90 Internal Vertical Riser 18 90 External Vertical Dropper 18 Horizontal Equal Tee Section 19 Horizontal Equal Cross Section 19 Concentric Reducer 20 Left/Right Hand Reducer 20 Reducer Joiners 21 Aluminium Lid Covers 22 REGISTERED COMPANY Mechanical Support Systems. Mechanical Support Systems reserves the the right right to change to designs and and specifications without without notice. notice.
PRODUCTION Machines and Scope Metal Fabrication CUTTING: Guillotine, band saw, gas cutting, punch and shear Plate cutting up to 6mm steel Batch cutting Hole punching Forming and bending: Press brake, pan folder, bulldozer bender 0.5mm thick to 6mm steel Adjustable jig for flat bar bending WELDING: Tig, Mig or Arc Pulsed Mig and Tig welder COIL PRODUCTION: Power press, de-coiling unit Punch, press and cut Medium to large production runs FINISHING: Powder Coating, Galvanising, Zinc Plating, Anodising, and Polishing CUTTING FORMING WELDING FINISHING MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY CABLE TRAY REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 1
CABLE TRAY EMT3 Cable Tray 300 EMT3 Allowable Loading (1.5 FOS) Load (kg/m) 250 200 150 100 Standard Length: 3.0m Standard Finish: Pre-Galvanised Cable Laying Depth: 45mm 50 0 1 1.5 2 2.5 3 Span (m) Width W : Part Number: 176 EMT3/150 PG 326 EMT3/300 PG 476 EMT3/450 PG 626 EMT3/600 PG EMT5 Cable Tray EMT5 Allowable Loading (1.5 FOS) 600 Load (kg/m) 500 400 300 200 100 0 1 1.5 2 2.5 3 Span (m) Standard Length: 3.0m Standard Finish: Pre-Galvanised Cable Laying Depth: 79mm Width W : Part Number: 176 EMT5/150 PG 326 EMT5/300 PG 476 EMT5/450 PG 626 EMT5/600 PG 2 2 MECHANICALSUPPORT.CO.NZ 0508 0508 CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY - ACCESSORIES EMT3/SP Splice Plate Application Example: EMT3/SP Splice Plate EMT5/SP Splice Plate Application Example: EMT5/SP Splice Plate REGISTERED COMPANY Mechanical Support Systems. Mechanical Mechanical Support Support Systems Systems reserves reserves the right the to right change to change designs designs and specifications and specifications without without notice. notice. 3 3
CABLE TRAY - ACCESSORIES EMT/TB Bolt & EMT/TN Nut EMT/TB Bolt Available in ZP or HDG EMT/TN Nut Available in ZP or HDG EMT/HDW Hold Down Washer EMT/HDW Hold Down Washer Suitable for EMT3 and EMT5 Series Cable Tray Application Example: Hold Down Washers can be used on EMT3 and EMT5 Series Cable Tray 4 4 MECHANICALSUPPORT.CO.NZ 0508 0508 CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY - ACCESSORIES EMT3/EXT/HDB Hold Down Bracket Application Example: Hold Down Bracket can be fastened to channel, walls, floors, ceilings etc EMT3/EXT/HDB Hold Down Bracket EMT5/EXT/HDB Hold Down Bracket Application Example: Hold Down Bracket can be fastened to channel, walls, floors, ceilings etc EMT5/EXT/HDB Hold Down Bracket REGISTERED COMPANY Mechanical Support Systems. Mechanical Mechanical Support Support Systems Systems reserves reserves the right the to right change to change designs designs and specifications and specifications without without notice. notice. 5 5
CABLE TRAY - ACCESSORIES EMT3/LP Link Plate Application Example: Link Plate (External Riser) 1. Cut both tray sides down to the bottom face. 2. Bend the tray along the bottom face and secure on the inside with Link Plates and fasteners. (2 cuts in each side result in a 90 riser) Link Plate (Internal Riser) EMT3/LP Link Plate 1. Cut both tray sides up to the top face. 2. Bend the tray along the top face and secure on the inside with Link Plates and fasteners. (2 cuts in each side result in a 90 riser) EMT5/LP Link Plate Application Example: Link Plate (External Riser) 1. Cut both tray sides down to the bottom face. 2. Bend the tray along the bottom face and secure on the inside with Link Plates and fasteners. (3 cuts in each side result in a 90 riser) Link Plate (Internal Riser) 1. Cut both tray sides up to the top face. 2. Bend the tray along the top face and secure on the inside with Link Plates and fasteners. (3 cuts in each side result in a 90 riser) EMT5/LP Link Plate 6 6 MECHANICALSUPPORT.CO.NZ 0508 0508 CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY - ACCESSORIES EMT3/RPP Radius Plate Pressing EMT3/RPP Radius Plate Pressing EMT5/RPP Radius Plate Pressing EMT5/RPP Radius Plate Pressing Application Example: Cut sides at top and bottom flanges only Cut outside walls of tray right through (3 cuts in each side result in a 90 bend) Radius Plate Pressing Form Radius Plate Pressing to suit. Cut to length before fixing with fasteners. REGISTERED COMPANY Mechanical Support Systems. Mechanical Mechanical Support Support Systems Systems reserves reserves the right the to right change to change designs designs and specifications and specifications without without notice. notice. 7 7
CABLE TRAY - ACCESSORIES EMT3/TEE Tee Bracket Application Example 1: 3-Way Tee Application Example 2: 4-Way Cross EMT3/TEE Tee Bracket EMT5/TEE Tee Bracket Application Example 1: 3-Way Tee Application Example 2: 4-Way Cross EMT5/TEE Tee Bracket 8 8 MECHANICALSUPPORT.CO.NZ 0508 0508 CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY - ACCESSORIES EMT3/DIVIDER Divider Strip Application Example: EMT3/DIVIDER Divider Strip EMT5/DIVIDER Divider Strip Application Example: EMT5/DIVIDER Divider Strip REGISTERED COMPANY Mechanical Support Systems. Mechanical Mechanical Support Support Systems Systems reserves reserves the right the to right change to change designs designs and specifications and specifications without without notice. notice. 9 9
CABLE TRAY - ACCESSORIES KBSI/THB PG Single Hanger Bracket KBSI/THB Single Hanger Bracket Standard Finish: Pre-Galvanised Width A : Width B : Height C : Part Number: Suits Cable Tray Width: 147 182 170 KBSI/THB/150 PG 75, 100 & 150mm 172 232 170 KBSI/THB/200 PG 200mm 222 332 170 KBSI/THB/300 PG 300mm Application Example: KBSI/THB Hanger Bracket shown clamped to Cable Tray using Hold Down Washer, suspended using Threaded Rod. The vertical section of the Hanger Bracket can be mounted to either side of the Cable Tray. (Hold Down Washer and Threaded Rod not included) 1010 MECHANICALSUPPORT.CO.NZ 0508 0508 CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER CABLE Cable Ladder LADDER ACCESSORIES CABLE LADDER REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 11
CABLE LADDER NEMA Aluminium Cable Ladder EM/N12A: EM/N12B: EM/N16A: Cable Laying Depth: 58mm Basic Load Capacity: 112kg/m @ 3m span Standard Length: 6.0m Rung Spacing: 300mm Nom. Material: Aluminium Cable Laying Depth: 86.5mm Basic Load Capacity: 190kg/m @ 3m span Standard Length: 6.0m Rung Spacing: 300mm Nom. Material: Aluminium Cable Laying Depth: 77mm Basic Load Capacity: 244kg/m @ 3m span Standard Length: 6.0m Rung Spacing: 300mm Nom. Material: Aluminium Width W : Part Number: 150 EM/N12A/150 AL 300 EM/N12A/300 AL 450 EM/N12A/450 AL 600 EM/N12A/600 AL 750 EM/N12A/750 AL 900 EM/N12A/900 AL Width W : Part Number: 150 EM/N12B/150 AL 300 EM/N12B/300 AL 450 EM/N12B/450 AL 600 EM/N12B/600 AL 750 EM/N12B/750 AL 900 EM/N12B/900 AL Width W : Part Number: 150 EM/N16A/150 AL 300 EM/N16A/300 AL 450 EM/N16A/450 AL 600 EM/N16A/600 AL 750 EM/N16A/750 AL 900 EM/N16A/900 AL EM/N12A Cable Ladder Allowable Loading* (1.5 FOS) EM/N12B Cable Ladder Allowable Loading* (1.5 FOS) EM/N16A Cable Ladder Allowable Loading* (1.5 FOS) 300 500 500 Load (kg/m) Load (kg/m) 250 200 150 100 50 0 Load (kg/m) 400 300 200 100 0 Load (kg/m) 400 300 200 100 0 2.0 3.0 4.0 5.0 6.0 2.0 3.0 4.0 5.0 6.0 2.0 3.0 4.0 5.0 6.0 Span (m) Span (m) Span (m) Span (m) *Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m. *Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m. *Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m. Load (kg/m) 300 240 180 120 60 0 2m Span EM/N12A Cable Ladder Deflection** Chart 5 3m Span 4m Span 5m Span 6m Span 0 30 60 90 120 150 180 Load (kg/m) 400 320 240 160 80 0 2m Span EM/N12B Cable Ladder Deflection** 3m Span 4m Span 5m Span 6m Span 0 20 40 60 80 Load (kg/m) 500 400 300 200 100 0 EM/N16A Cable Ladder Deflection** 2m Span 3m Span 4m Span 5m Span 6m Span 0 20 40 60 80 100 Deflection Deflection Deflection **Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation factors (such as location of connectors and support etc). **Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation factors (such as location of connectors and support etc). **Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation factors (such as location of connectors and support etc). All load testing performed on 600mm ladder width and complies to all NEMA VE1 standards. 12 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER NEMA Aluminium Cable Ladder EM/N20A: Cable Laying Depth: 97mm Basic Load Capacity: 458kg/m @ 3m span Standard Length: 6.0m Rung Spacing: 300mm Nom. Material: Aluminium Width W : Part Number: 150 EM/N20A/150 AL 300 EM/N20A/300 AL 450 EM/N20A/450 AL 600 EM/N20A/600 AL 750 EM/N20A/750 AL 900 EM/N20A/900 AL EM/N20A EM/N20A Cable Ladder Cable Mesh Allowable Allowable Loading* Loading (1.5 (1.5 FOS) FOS) 900 750 Load (kg/m) Load (kg/m) 600 450 300 150 0 2.0 3.0 4.0 5.0 6.0 Span (m) Span (m) *Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m. 900 EM/N20A Cable Ladder Deflection** Chart 5 Load (kg/m) 750 600 450 300 150 2m Span 3m Span 4m Span 5m Span 6m Span 0 0 10 20 30 40 50 Deflection **Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation factors (such as location of connectors and support etc). All load testing performed on 600mm ladder width and complies to all NEMA VE1 standards. REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 13
CABLE LADDER ACCESSORIES Splice Plate - 12A, 12B, 16A, 20A Application Example: To Suit Ladder Type: Part Number: 12A EM/N12A/SP AL 12B EM/N12B/SP AL 16A EM/N16A/SP AL 20A EM/N20A/SP AL EMT/TB Bolt & EMT/TN Nut EMT/TB Bolt Available in ZP or HDG EMT/TN Nut Available in ZP or HDG 14 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER ACCESSORIES Internal Hold Down Washer Application Example: EM/NHDW AL Internal Hold Down Washer (Generic for all ladder) External Hold Down Bracket Application Example: To Suit Ladder Type: Part Number: 12A EM/N12A/HDB AL 12B EM/N12B/HDB AL 16A EM/N16A/HDB AL 20A EM/N20A/HDB AL REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 15
CABLE LADDER ACCESSORIES Adjustable Vertical Elbow 1 set per transition To Suit Ladder Type: Part Number: 12A EM/N12A/AVE AL 12B EM/N12B/AVE AL 16A EM/N16A/AVE AL 20A EM/N20A/AVE AL Adjustable Horizontal Hinge 2 sets per transition To Suit Ladder Type: Part Number: 12A EM/N12A/AHE AL 12B EM/N12B/AHE AL 16A EM/N16A/AHE AL 20A EM/N20A/AHE AL 16 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER ACCESSORIES 90 Horizontal Bend Cable Ladder: Inside Radius: Width: Part Number: 12A 300 150 EM/N12A/HB90/150 AL 300 EM/N12A/HB90/300 AL 450 EM/N12A/HB90/450 AL 600 EM/N12A/HB90/600 AL 750 EM/N12A/HB90/750 AL 900 EM/N12A/HB90/900 AL 12B 300 150 EM/N12B/HB90/150 AL 300 EM/N12B/HB90/300 AL 450 EM/N12B/HB90/450 AL 600 EM/N12B/HB90/600 AL 750 EM/N12B/HB90/750 AL 900 EM/N12B/HB90/900 AL 16A 300 150 EM/N16A/HB90/150 AL 300 EM/N16A/HB90/300 AL 450 EM/N16A/HB90/450 AL 600 EM/N16A/HB90/600 AL 750 EM/N16A/HB90/750 AL 900 EM/N16A/HB90/900 AL 20A 450 150 EM/N20A/HB90/150 AL 300 EM/N20A/HB90/300 AL 450 EM/N20A/HB90/450 AL 600 EM/N20A/HB90/600 AL 750 EM/N20A/HB90/750 AL 900 EM/N20A/HB90/900 AL Custom radii and widths are available on request 45 Horizontal Bend Cable Ladder: Inside Radius: Width: Part Number: 12A 300 150 EM/N12A/HB45/150 AL 300 EM/N12A/HB45/300 AL 450 EM/N12A/HB45/450 AL 600 EM/N12A/HB45/600 AL 750 EM/N12A/HB45/750 AL 900 EM/N12A/HB45/900 AL 12B 300 150 EM/N12B/HB45/150 AL 300 EM/N12B/HB45/300 AL 450 EM/N12B/HB45/450 AL 600 EM/N12B/HB45/600 AL 750 EM/N12B/HB45/750 AL 900 EM/N12B/HB45/900 AL 16A 300 150 EM/N16A/HB45/150 AL 300 EM/N16A/HB45/300 AL 450 EM/N16A/HB45/450 AL 600 EM/N16A/HB45/600 AL 750 EM/N16A/HB45/750 AL 900 EM/N16A/HB45/900 AL 20A 450 150 EM/N20A/HB45/150 AL 300 EM/N20A/HB45/300 AL 450 EM/N20A/HB45/450 AL 600 EM/N20A/HB45/600 AL 750 EM/N20A/HB45/750 AL 900 EM/N20A/HB45/900 AL Custom radii and widths are available on request REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 17
CABLE LADDER ACCESSORIES 90 Internal Vertical Riser Cable Ladder: Inside Radius: Width: Part Number: 12A 300 150 EM/N12A/INT/RISER/150 AL 300 EM/N12A/INT/RISER/300 AL 450 EM/N12A/INT/RISER/450 AL 600 EM/N12A/INT/RISER/600 AL 750 EM/N12A/INT/RISER/750 AL 900 EM/N12A/INT/RISER/900 AL 12B 300 150 EM/N12B/INT/RISER/150 AL 300 EM/N12B/INT/RISER/300 AL 450 EM/N12B/INT/RISER/450 AL 600 EM/N12B/INT/RISER/600 AL 750 EM/N12B/INT/RISER/750 AL 900 EM/N12B/INT/RISER/900 AL 16A 300 150 EM/N16A/INT/RISER/150 AL 300 EM/N16A/INT/RISER/300 AL 450 EM/N16A/INT/RISER/450 AL 600 EM/N16A/INT/RISER/600 AL 750 EM/N16A/INT/RISER/750 AL 900 EM/N16A/INT/RISER/900 AL 20A 450 150 EM/N20A/INT/RISER/150 AL 300 EM/N20A/INT/RISER/300 AL 450 EM/N20A/INT/RISER/450 AL 600 EM/N20A/INT/RISER/600 AL 750 EM/N20A/INT/RISER/750 AL 900 EM/N20A/INT/RISER/900 AL Custom radii and widths are available on request 90 External Vertical Riser Cable Ladder: Inside Radius: Width: Part Number: 12A 300 150 EM/N12A/EXT/RISER/150 AL 300 EM/N12A/EXT/RISER/300 AL 450 EM/N12A/EXT/RISER/450 AL 600 EM/N12A/EXT/RISER/600 AL 750 EM/N12A/EXT/RISER/750 AL 900 EM/N12A/EXT/RISER/900 AL 12B 300 150 EM/N12B/EXT/RISER/150 AL 300 EM/N12B/EXT/RISER/300 AL 450 EM/N12B/EXT/RISER/450 AL 600 EM/N12B/EXT/RISER/600 AL 750 EM/N12B/EXT/RISER/750 AL 900 EM/N12B/EXT/RISER/900 AL 16A 300 150 EM/N16A/EXT/RISER/150 AL 300 EM/N16A/EXT/RISER/300 AL 450 EM/N16A/EXT/RISER/450 AL 600 EM/N16A/EXT/RISER/600 AL 750 EM/N16A/EXT/RISER/750 AL 900 EM/N16A/EXT/RISER/900 AL 20A 450 150 EM/N20A/EXT/RISER/150 AL 300 EM/N20A/EXT/RISER/300 AL 450 EM/N20A/EXT/RISER/450 AL 600 EM/N20A/EXT/RISER/600 AL 750 EM/N20A/EXT/RISER/750 AL 900 EM/N20A/EXT/RISER/900 AL Custom radii and widths are available on request 18 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER ACCESSORIES Horizontal Equal Tee Section Cable Ladder: Inside Radius: Width: Part Number: 12A 300 150 EM/N12A/EQTEE/150 AL 300 EM/N12A/EQTEE/300 AL 450 EM/N12A/EQTEE/450 AL 600 EM/N12A/EQTEE/600 AL 750 EM/N12A/EQTEE/750 AL 900 EM/N12A/EQTEE/900 AL 12B 300 150 EM/N12B/EQTEE/150 AL 300 EM/N12B/EQTEE/300 AL 450 EM/N12B/EQTEE/450 AL 600 EM/N12B/EQTEE/600 AL 750 EM/N12B/EQTEE/750 AL 900 EM/N12B/EQTEE/900 AL 16A 300 150 EM/N16A/EQTEE/150 AL 300 EM/N16A/EQTEE/300 AL 450 EM/N16A/EQTEE/450 AL 600 EM/N16A/EQTEE/600 AL 750 EM/N16A/EQTEE/750 AL 900 EM/N16A/EQTEE/900 AL 20A 450 150 EM/N20A/EQTEE/150 AL 300 EM/N20A/EQTEE/300 AL 450 EM/N20A/EQTEE/450 AL 600 EM/N20A/EQTEE/600 AL 750 EM/N20A/EQTEE/750 AL 900 EM/N20A/EQTEE/900 AL Custom radii and widths are available on request 4 Way Cross Cable Ladder: Inside Radius: Width: Part Number: 12A 300 150 EM/N12A/CROSS/150 AL 300 EM/N12A/CROSS/300 AL 450 EM/N12A/CROSS/450 AL 600 EM/N12A/CROSS/600 AL 750 EM/N12A/CROSS/750 AL 900 EM/N12A/CROSS/900 AL 12B 300 150 EM/N12B/CROSS/150 AL 300 EM/N12B/CROSS/300 AL 450 EM/N12B/CROSS/450 AL 600 EM/N12B/CROSS/600 AL 750 EM/N12B/CROSS/750 AL 900 EM/N12B/CROSS/900 AL 16A 300 150 EM/N16A/CROSS/150 AL 300 EM/N16A/CROSS/300 AL 450 EM/N16A/CROSS/450 AL 600 EM/N16A/CROSS/600 AL 750 EM/N16A/CROSS/750 AL 900 EM/N16A/CROSS/900 AL 20A 450 150 EM/N20A/CROSS/150 AL 300 EM/N20A/CROSS/300 AL 450 EM/N20A/CROSS/450 AL 600 EM/N20A/CROSS/600 AL 750 EM/N20A/CROSS/750 AL 900 EM/N20A/CROSS/900 AL Custom radii and widths are available on request REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 19
CABLE LADDER REDUCERS NEMA 12A, 12B, 16A, 20A Concentric/Centred Reducer to suit all ladder Reducer types Concentric/Centred Reducer From To Bracket 1 Bracket 2 300 75 75 450 150 150 600 150 225 225 750 300 300 900 375 375 450 75 75 600 150 150 300 750 225 225 900 300 300 600 75 75 750 450 150 150 900 225 255 750 75 75 600 900 150 150 900 750 75 75 Reducer Bracket Reducer Bracket Flanged Nut + Bolt Left/Right hand Reducer Left/Right hand Reducer From To Bracket 1 Bracket 2 300 150 450 300 600 150 450 750 600 900 750 450 150 600 300 300 750 450 900 600 600 150 750 450 300 900 450 750 150 600 900 300 900 750 150 Splice plate Reducer Bracket Splice Plate Flanged Nut + Bolt 20 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER REDUCER JOINERS Splice Plate - 12A, 12B, 16A, 20A Application Example: To Suit Ladder Type: Part Number: 12A EM/N12A/SP AL 12B EM/N12B/SP AL 16A EM/N16A/SP AL 20A EM/N20A/SP AL Reducer Bracket - 12A, 12B, 16A, 20A Flanged Nut & Bolt EMT/TB Bolt Available in ZP or HDG EMT/TN Nut Available in ZP or HDG REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 21
CABLE LADDER ACCESSORIES Aluminium Lid Covers Standard Cover Standard Length: 3.0m Material: Aluminium Vented Cover Standard Length: 3.0m Material: Aluminium Peaked Cover Standard Length: 3.0m Material: Aluminium Custom covers to suit any application are available on request. 22 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING CABLE TRUNKING CABLE TRUNKING REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 23
CABLE TRUNKING Trunking Schematic Joiner EM/STR/SJ (H) Trunking Body & Lid EM/STR (W)x(H) 4 Way Cross Section EM/STR/CROSS (W)x(H) Vertical Bend - Lid Inside EM/STR/INT/RISER (W)x(H) Horizontal T-Section - Lid on Top EM/STR/EQ/TEE (W)x(H) Horizontal T-Section - Lid on Inside EM/STR/INT/TEE (W)x(H) Horizontal T-Section - Lid on Outside EM/STR/EXT/TEE (W)x(H) Vertical Bend - Lid Outside EM/STR/EXT/RISER (W)x(H) 24 Horizontal Bend - Lid on Top EM/STR/HB (W)x(H) MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ Designed by: B Mumme 28/03/2017 Flange Adaptor EM/STR/FA (W)x(H) V25 End Cap EM/STR/EC (W)x(H) Cadfile: Cable GA.idw Twist Adaptor EM/STR/TA (W)x(H) Preliminary: For Approval Sheet size: A4 t Mechanical Support Systems 28/03/2017
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R 75 75 3000 EM/STR 75x75 PG 100 50 3000 EM/STR 100x50 PG 100 75 3000 EM/STR 100x75 PG CABLE TRUNKING 100 100 3000 EM/STR 100x100 PG 150 100 3000 EM/STR 150x100 PG Trunking Note: Body Special and profiles Lid can be made to order upon request. Straigth Trunking is supplied with the following components: 1 x Straight Trunking body 1 x Straight Trunking lid 6 x KBV Fast lock clips Optional extras EM/STR/SJ (H) Joiner EM/STR/EC (W)x(H) End Cap KBV KBV Fast Fast Lock lock Clips clips Designed by: B Mumme 28/03/2017 Width Trunking Body & Lid 11 Drain hole Preliminary: For Approval V13 Cadfile: STR.idw 3000 Sheet size: A4 150 1350 Mechanical Support Systems 1350 150 Edition EM/STR C Sheet 1 / 1 Prepared by: Brimum Mechanical Draughting ph 021 172 8347 Copyright Mechanical Support Systems 28/03/2017 Height Width: Width Height: Length Length: Part Number: (m) Part Number 50 50 50 50 30003.0EM/STR EM/STR 50x5050X50 PG PG 75 75 75 75 30003.0EM/STR EM/STR 75x7575X75 PG PG 100 100 50 50 30003.0EM/STR EM/STR 100x50100X50 PG PG 100 100 75 75 3000 3.0 EM/STR EM/STR 100x75 100X75 PG PG 100 100 3000 EM/STR 100x100 PG 100 100 3.0 EM/STR 100X100 PG 150 100 3000 EM/STR 150x100 PG 150 100 3.0 EM/STR 150X100 PG Straight Trunking is supplied with the following components: 1 x Straight Trunking body 1 x Straight Trunking Lid 6 x KBV Fast Lock Clips Optional extras: EM/STR/SJ (H) Joiner EM/STR/EC (W)x(H) End Cap NOTE: Note: Special Special profiles profiles can can be be made made to to order order upon upon request. Straigth Trunking is supplied with the following components: 1 x Straight Trunking body 1 x Straight Trunking lid 6 x KBV Fast lock clips REGISTERED COMPANY Optional extras EM/STR/SJ (H) Joiner Mechanical Support Systems reserves the right to change designs and specifications without notice. EM/STR/EC (W)x(H) End Cap 25 KBV
CABLE TRUNKING Gutter Bolt Flanged Hex Nut GBM06 x 16ZP M6x16 Gutter Bolt HNFM06ZP M6 Flanged Hex Nut KBV Fast Locking Clip Standard Finish: Stainless Steel 316 Part Number: KBV Fast Lock Clips KBSI/KBV Joiner Height 90 Height: Part Number: 50 EM/STR/SJ 50 PG 75 EM/STR/SJ 75 PG 100 EM/STR/SJ 100 PG 150 EM/STR/SJ 150 PG Joiner is supplied with the following components: 2 x Joiner plate 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut 26 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING Horizontal Bend - Lid On Top Height Width KBV Fast Lock lock Clips clips Width Height Part Number 50 50 EM/STR/HB 50x50 PG 75 75 EM/STR/HB 75x75 PG 100 50 EM/STR/HB100x50 PG 100 75 EM/STR/HB 100x75 PG 100 100 EM/STR/HB 100x100 PG 150 100 EM/STR/HB 150x100 PG Fas GBM06 MGB0616ZP x Gutter Bolt screw HNFM06ZP HMFN06ZP Flanged Hex Nut Horizontal Bend is supplied with the following components: 1 x Horizontal Bend body 1 x Horizontal Bend lid 3 x KBV Fast lock clips 4 x MGB0616ZP M6 Gutter bolt 4 x HMFN06ZP M6 Flange nut Width: Height: Part Number: 50 50 EM/STR/HB 50X50 PG 75 75 EM/STR/HB 75X75 PG 100 50 EM/STR/HB 100X50 PG 100 75 EM/STR/HB 100X75 PG 100 100 EM/STR/HB 100X100 PG 150 100 EM/STR/HB 150X100 PG Horizontal Bend is supplied with the following components: 1 x Horizontal Bend Body 1 x Horizontal Bend Lid 3 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 27
CABLE TRUNKING Vertical Bend - Lid on Outside Width KBV Fast lock Lock clips Clips GBM06 x 16ZP MGB0616ZP Gutter Bolt Gutter screw HMFN06ZP HNFM06ZP Flanged Hex Nut Width: Height: Part Number: 50 50 EM/STR/EXT/RISER 50X50 PG 75 75 EM/STR/EXT/RISER 75X75 PG 100 50 EM/STR/EXT/RISER 100X50 PG 100 75 EM/STR/EXT/RISER 100X75 PG 100 100 EM/STR/EXT/RISER 100X100 PG 150 100 EM/STR/EXT/RISER 150X100 PG Vertical Bend is supplied with the following components: 1 x Vertical Bend Body 2 x Vertical Bend Lid 4 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut 28 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ l Support Systems 28/03/2017
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING Vertical Bend - Lid Inside Width Height KBV Fast lock Lock clips Clips HNFM06ZP Flanged HMFN06ZP Hex Nut Flanged Hex Nut MGB0616ZP GBM06 x 16ZP Gutter Gutter screw Bolt Width: Height: Part Number: 50 50 EM/STR/INT/RISER 50X50 PG 75 75 EM/STR/INT/RISER 75X75 PG 100 50 EM/STR/INT/RISER 100X50 PG 100 75 EM/STR/INT/RISER 100X75 PG 100 100 EM/STR/INT/RISER 100X100 PG 150 100 EM/STR/INT/RISER 150X100 PG Vertical Bend is supplied with the following components: 1 x Vertical Bend Body 1 x Vertical Bend Lid 4 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. Systems 28/03/2017 29
CABLE TRUNKING Horizontal T-Section - Lid On Top Height KBV KBV Fast Fast lock Lock clips Clips KBV Fast lock clips Width MGB0616ZP HNFM06ZP Gutter Flanged screw Hex Nut MGB0616ZP Gutter screw MGB0616ZP GBM06 x 16ZP Gutter Gutter screw Bolt MGB0616ZP Gutter screw Width: Height: Part Number: 50 50 EM/STR/EQ/TEE 50X50 PG 75 75 EM/STR/EQ/TEE 75X75 PG 100 50 EM/STR/EQ/TEE 100X50 PG 100 75 EM/STR/EQ/TEE 100X75 PG 100 100 EM/STR/EQ/TEE 100X100 PG 150 100 EM/STR/EQ/TEE 150X100 PG Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section Body 1 x Horizontal T-Section Lid 3 x KBV Fast Lock Clips 6 x GBM06 x 16ZP M6 Gutter Bolt 6 x HNFM06ZP M6 Flange Nut 30 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ tems 28/03/2017
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING Horizontal T-Section - Lid On Outside Width Height KBV KBV Fast lock Lock clips Clips KBV Fast lock clips HNFM06ZP HMFN06ZP Flanged Hex Nut Nut HMFN06ZP Flanged Hex Nut GBM06 MGB0616ZP x 16ZP Gutter Gutter screw Bolt MGB0616ZP Gutter screw Width: Height: Part Number: 50 50 EM/STR/EXT/TEE 50X50 PG 75 75 EM/STR/EXT/TEE 75X75 PG 100 50 EM/STR/EXT/TEE 100X50 PG 100 75 EM/STR/EXT/TEE 100X75 PG 100 100 EM/STR/EXT/TEE 100X100 PG 150 100 EM/STR/EXT/TEE 150X100 PG Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section Body 1 x Horizontal T-Section Lid 2 x KBV Fast Lock Clips 6 x GBM06 x 16ZP M6 Gutter Bolt 6 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. tems 28/03/2017 31
CABLE TRUNKING Horizontal T-Section - Lid On Inside Height Width MGB0616ZP GBM06 x 16ZP Gutter Gutter screw Bolt HNFM06ZP HMFN06ZP Flanged Hex Nut Flanged Hex Nut KBV KBV Fast Fast Lock lock Clips clips Width: Height: Part Number: 50 50 EM/STR/INT/TEE 50X50 PG 75 75 EM/STR/INT/TEE 75X75 PG 100 50 EM/STR/INT/TEE 100X50 PG 100 75 EM/STR/INT/TEE 100X75 PG 100 100 EM/STR/INT/TEE 100X100 PG 150 100 EM/STR/INT/TEE 150X100 PG Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section Body 2 x Horizontal T-Section Lid 4 x KBV Fast Lock Clips 6 x GBM06 x 16ZP M6 Gutter Bolt 6 x HNFM06ZP M6 Flange Nut 32 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ al Support Systems 28/03/2017
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING 4-Way Cross Section Height Width KBV KBV Fast lock Lock clips Clips MGB0616ZP GBM06 x 16ZP HNFM06ZP HMFN06ZP Gutter screw Bolt Flanged Hex Nut Width: Height: Part Number: 50 50 EM/STR/CROSS 50X50 PG 75 75 EM/STR/CROSS 75X75 PG 100 50 EM/STR/CROSS 100X50 PG 100 75 EM/STR/CROSS 100X75 PG 100 100 EM/STR/CROSS 100X100 PG 150 100 EM/STR/CROSS 150X100 PG 4 Way Cross Section is supplied with the following components: 1 x 4 Way Cross Section Body 1 x 4 Way Cross Section Lid Adaptor Lid 4 x KBV Fast Lock Clips 8 x GBM06 x 16ZP M6 Gutter Bolt 8 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. l Support Systems 28/03/2017 33
CABLE TRUNKING Flange Adaptor Height Remove section of trunking sidewall, drill Ø8mm hole for M6 fixings KBV KBV Fast Fast lock Lock clips Clips Width HNFM06ZP HMFN06ZP Flanged Hex Hex Nut Nut GBM06 MGB0616ZP x 16ZP Gutter Gutter screw Bolt Width: Height: Part Number: 50 50 EM/STR/FA 50X50 PG 75 75 EM/STR/FA 75X75 PG 100 50 EM/STR/FA 100X50 PG 100 75 EM/STR/FA 100X75 PG 100 100 EM/STR/FA 100X100 PG 150 100 EM/STR/FA 150X100 PG Flange Adaptor is supplied with the following components: 1 x Flange Adaptor Body 1 x Flange Adaptor Lid 2 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut 34 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING Twist Adaptor Width Height Height Width KBV Fast lock Lock clips Clips s: MGB0616ZP GBM06 x 16ZP Gutter Gutter screw Bolt HMFN06ZP HNFM06ZP Flanged Hex Nut Width: Height: Part Number: 50 50 EM/STR/TA 50X50 PG 75 75 EM/STR/TA 75X75 PG 100 50 EM/STR/TA 100X50 PG 100 75 EM/STR/TA 100X75 PG 100 100 EM/STR/TA 100X100 PG 150 100 EM/STR/TA 150X100 PG Twist Adaptor is supplied with the following components: 1 x Twist Adaptor Body 1 x Twist Adaptor Lid 2 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 35
CABLE TRUNKING End Cap Height Width GBM06 MGB0616ZP x 16ZP Gutter Gutter screw Bolt HNFM06ZP HMFN06ZP Flanged Hex Nut Flanged Hex Nut Width: Height: Part Number: 50 50 EM/STR/EC 50X50 PG 75 75 EM/STR/EC 75X75 PG 100 50 EM/STR/EC 100X50 PG 100 75 EM/STR/EC 100X75 PG 100 100 EM/STR/EC 100X100 PG 150 100 EM/STR/EC 150X100 PG End Cap is supplied with the following components: 1 x End Cap 2 x GBM06 x 16ZP M6 Gutter Bolt 2 x HNFM06ZP M6 Flange Nut 36 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
MECHANICAL NEW ZEALAND SUPPORT INTERNATIONAL SYSTEMS CONVENTION CABLE TRAY CENTRE 2017 Mechanical Support Systems reserves the right to change designs and specifications without notice. 37
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 38 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
Product Catalogue Range Download a catalogue www.mechanicalsupport.co.nz Get in touch with us 0508 CABLE TRAY or (09) 279-8292 R BS OHSAS 18001:2007 & AS/NZS 4801:2001 REGISTERED COMPANY Certificate No. NZP1023HS Mechanical Support Systems reserves the right to change designs and specifications without notice. 39
MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY (0508 222 5387) All products manufactured in accordance with ISO9001 Standard SALESINFO@MECHANICALSUPPORT.CO.NZ 40 Mechanical Support Systems reserves the right to change designs and specifications without notice.