Ditcher DT55 & DTM55 20506 324-053P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2017 Printed 12/29/17 Cover photo may show optional equipment not supplied with standard unit.
Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frame...6 Ditcher Frame S/N 407820-...6 Ditcher Frame S/N 407821+...8 Section 3: Drive...10 Drive Assembly S/N 407820-...10 Drive Assembly S/N 407821+...12 Impeller S/N 622368-...14 Impeller S/N 622369+...16 Section 4: Driveline...18 Clutch Shear Bolt (387505)...18 Driveline 1000 RPM 1 3/4" (826-303C) Walterscheid...20 Driveline 1000 RPM 1 3/8" (826-302C) Walterscheid...22 Driveline 540 RPM (826-301C) Walterscheid...24 Section 5: Labels...26 Label Placement...26 Touch-up Paints...28 Section 6: Options & Accessories...30 Blade Option...30 Chute Option S/N 407820-...32 Chute Option S/N 407821+...34 Depth Shoe Option (S/N 340077-)...36 Depth Shoe Option (S/N 340078+)...38 Gauge Wheel Option...40 Hydraulic Cylinder (810-005C) Energy...42 Ripper Option...44...46 Copyright 2017. All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 DT55 & DTM55 Ditcher 324-053P 12/29/17
B C D G H I L R Blade Option...30 Chute Option S/N 407820-...32 Chute Option S/N 407821+...34 Clutch Shear Bolt (387505)...18 Depth Shoe Option (S/N 340077-)...36 Depth Shoe Option (S/N 340078+)...38 Ditcher Frame S/N 407820-...6 Ditcher Frame S/N 407821+...8 Drive Assembly S/N 407820-...10 Drive Assembly S/N 407821+...12 Driveline 1000 RPM 1 3/4" (826-303C) Walterscheid...20 Driveline 1000 RPM 1 3/8" (826-302C) Walterscheid...22 Driveline 540 RPM (826-301C) Walterscheid...24 Gauge Wheel Option...40 Hydraulic Cylinder (810-005C) Energy...42 Impeller S/N 622368-...14 Impeller S/N 622369+...16 Label Placement...26 Touch-up Paints...28 Ripper Option...44 Alphabetized Table of Contents 12/29/17 DT55 & DTM55 Ditcher 324-053P 3
4 DT55 & DTM55 Ditcher 324-053P 12/29/17
12/29/17 DT55 & DTM55 Ditcher 324-053P 5
Ditcher Frame S/N 407820- Section 2: Frame 20524 6 DT55 & DTM55 Ditcher 324-053P 12/29/17
Ditcher Frame S/N 407820- Section 2: Frame Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. dwg20524 300-318D 316-099D 316-100D 324-020H 324-026H 324-043D 324-074H 802-106C 802-155C 802-258C 803-013C 803-020C 804-015C 804-017C 805-103C 805-212C 805-255C Drawing Image Number HITCH BUSHING HITCH PIN HITCH SPACER DITCHER STAND DT55 CHUTE WELDMENT INNER DT55 CUTTING EDGE DT55 DITCHER FRAME RHSNB 1/2-13X1 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 HHCS 1/2-13X1 GR5 NUT LOCK 3/8-16 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT PIN LYNCH 7/16 X 1 3/4 PIN WIRE SNAP LOCK 3/8 X 2 1/2 PIN ROLL 3/8 X 2 1/2 PLT (S/N 340077+) 12/29/17 DT55 & DTM55 Ditcher 324-053P 7
Ditcher Frame S/N 407821+ Section 2: Frame 22439 8 DT55 & DTM55 Ditcher 324-053P 12/29/17
Ditcher Frame S/N 407821+ Section 2: Frame Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 dwg22439 300-318D 316-099D 316-100D 324-007H 324-007H82 324-007H83 324-020H 324-073H 802-106C 802-258C 803-020C 804-015C 804-017C 805-103C 805-212C 805-255C Drawing Image Number HITCH BUSHING HITCH PIN HITCH SPACER DITCHER FRAME WELDMENT FRAME WELD DT55 ORANGE DITCHER FRAME WELDMENT RED DITCHER STAND DT55 CHUTE WELDMENT RHSNB 1/2-13X1 1/2 GR5 HHCS 1/2-13X1 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT PIN LYNCH 7/16 X 1 3/4 PIN WIRE SNAP LOCK 3/8 X 2 1/2 PIN ROLL 3/8 X 2 1/2 PLT 12/29/17 DT55 & DTM55 Ditcher 324-053P 9
Drive Assembly S/N 407820- Section 3: Drive 20639 10 DT55 & DTM55 Ditcher 324-053P 12/29/17
Drive Assembly S/N 407820- Section 3: Drive Ref. Part No. Part Description Comments Revision 5. 6. 6. 7. 8. 9. 10. 1 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 2 2 25. 26. 27. 28. 29. 30. 3 3 3 3 35. 36. 37. 37. 37. 38. dwg20639 324-012D 324-043H 324-044D 324-051H 324-086D 324-094D 804-017C 800-001C 800-312C 802-051C 802-078C 802-079C 802-082C 802-258C 802-233C 803-006C 803-026C 803-193C 804-006C 804-013C 804-015C 804-022C 804-185C 807-125C 808-284C 808-285C 808-285C 808-284C 808-317C 809-100C 809-210C 811-769C 815-118C 816-345C 816-346C 816-347C 822-187C NF212 NA212-36-COL NA212-36-BRG 826-301C 826-302C 826-303C 324-052K Drawing Image Number STEM TOP PLATE IMPELLER WELDMENT DT55 INSPECTION COVER DT55 SPROCKET IDLER WELD DT55 SPROCKET SPACER DT55 IDLER PIVOT DT55 WASHER FLAT 1/2 USS PLT GREASE ZERK STRAIGHT 1/4-28 WOODRUFF KEY 1/2 X 2 3/4 #1622 HHCS 5/8-11X1 1/2 GR5 HHCS 1/4-20X5/8 GR5 HHCS 3/8-16X1 1/4 GR5 HHCS 1/2-13X1 3/4 GR5 HHCS 1/2-13X1 GR5 SP EYE 1/4-20X2 3/4 NUT HEX 1/4-20 PLT NUT LOCK 3/4-10 PLT NUT HEX FLANGE 1/2-13 GR G PLT WASHER LOCK SPRING 1/4 PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 5/8 PLT WASHER RUBBER CLAD 3/8" GALV SPRING EXT 1 X 4 X.135 WD SPKT HD80-2 X 22T 2 1/4B/1/2KY SPKT HD80-2 X 16T 2 1/4B/1/2KY SPKT HD80-2 X 16T 2 1/4B/1/2KY SPKT HD80-2 X 22T 2 1/4B/1/2KY SPKT 8OSER11T WITH BEARING #80 CONNECTOR HD HI TENSILE CHAIN #80-2X70P HD HI TEN 3/4 NPT SQ HD PIPE PLUG UPPER SHAFT,DITCHER FLG BEARING GASKET DT55 INSPECTION GASKET DT55 TOP PLATE GASKET DT55 BEARING 4 BLT CAMLCK 25 BORE HOUSING FOR 822-187C LOCK COLLAR FOR BRG 822-187C SPHERICAL BEARING FOR 822-187C DRIVELINE W2500 X 40" MIN DRIVELINE W2500 X 40" MIN DRIVELINE W2500 X 40" MIN SPROCKET IDLER ASSY DT55 (S/N 343036+) (S/N 343035-) (S/N 343036+) (S/N 343035-) DT55 540 RPM DTM55 1000 RPM DT55 540 RPM DTM55 1000 RPM 540 RPM 1000 RPM 1 3/8 Spline 1000 RPM 1 3/4 Spline Rev. 2 not compat. w/rev. 1 Rev. 1 Rev. 2 not compat. w/rev. 1 Rev. 1 12/29/17 DT55 & DTM55 Ditcher 324-053P 11
Drive Assembly S/N 407821+ Section 3: Drive 22438 12 DT55 & DTM55 Ditcher 324-053P 12/29/17
Drive Assembly S/N 407821+ Section 3: Drive Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. 26. 27. 28. 29. 30. 3 3 3 3 35. 36. 37. 38. 38. 38. 39. 39. 40. Dwg 22438 324-012D 324-012D82 324-078K 324-044D 324-044D82 324-060H 324-061H 324-062K 324-086D 800-001C 800-312C 802-066C 802-228C 802-067C 802-078C 802-079C 803-026C 803-048C 803-209C 804-006C 804-013C 804-022C 804-185C 805-109C 805-260C 808-284C 808-285C 808-317C 809-100C 809-210C 811-769C 815-118C 816-345C 816-346C 816-347C 822-187C NF212 NA212-36-COL NA212-36-BRG 826-301C 826-302C 826-303C 827-007C 324-102D 324-114D Drawing Image Number STEM TOP PLATE STEM TOP PLATE ORANGE IMPELLER ASSY. INSPECTION COVER DT55 INSPECTION COVER DT55 ORANGE TIGHTENER PIVOT WELDMENT TIGHTENER WELDMENT TIGHTENER ASSY SPROCKET SPACER DT55 GREASE ZERK STRAIGHT 1/4-28 WOODRUFF KEY 1/2 X 2 3/4 #1622 HHCS 3/4-10X3 1/2 GR5 HHCS 5/8-11X1 1/2 GR5 NYL HHCS 3/4-10X4 GR5 FTHD HHCS 1/4-20X5/8 GR5 HHCS 3/8-16X1 1/4 GR5 NUT LOCK 3/4-10 PLT NUT HEX JAM 3/4-10 PLT NUT FLANGE LOCK 3/8-16 PLT WASHER LOCK SPRING 1/4 PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 5/8 PLT WASHER RUBBER CLAD 3/8" GALV PIN COTTER 1/8 X 1 1/4 PLT PIN CLEVIS 1/2X2 49/64 USABLE SPKT HD80-2 X 22T 2 1/4B/1/2KY SPKT HD80-2 X 16T 2 1/4B/1/2KY SPKT 8OSER11T WITH BEARING #80 CONNECTOR HD HI TENSILE CHAIN #80-2X70P HD HI TEN 3/4 NPT SQ HD PIPE PLUG UPPER SHAFT,DITCHER FLG BEARING GASKET DT55 INSPECTION GASKET DT55 TOP PLATE GASKET DT55 BEARING 4 BLT CAMLCK 25 BORE HOUSING FOR 822-187C LOCK COLLAR FOR BRG 822-187C SPHERICAL BEARING FOR 822-187C DRIVELINE W2500 X 40" MIN DRIVELINE W2500 X 40" MIN DRIVELINE W2500 X 40" MIN G.W. SPACER TUBE-SHORT SPACER SPACER SPROCKET Includes items 4, 5, 7, 10, 15, 22, 23, 26 & 39 Includes items 8, 35, 36 & 37 540 RPM 1000 RPM 1 3/8 Spline 1000 RPM 1 3/4 Spline S/N 697119+ (Qty. 4) S/N 697118- (Qty. 2) 12/29/17 DT55 & DTM55 Ditcher 324-053P 13
Impeller S/N 622368- Section 3: Drive 20553 14 DT55 & DTM55 Ditcher 324-053P 12/29/17
Impeller S/N 622368- Section 3: Drive Ref. Part No. Part Description Comments Revision 5. 5. 6. 6. dwg20553 324-043H 324-044K 802-214C 803-037C 820-418C 820-234C 820-419C 820-242C Drawing Image Number IMPELLER WELDMENT DT55 IMPELLER ASSY DT55 RHSNB 1/2-13X1 1/4 GR5 NUT HEX WHIZ 1/2-13 PLT DITCHER EDGE LONG HD RPBY 820-418C DITCHER EDGE SHORT HD RPBY 820-419C Inculdes 1,3,4,5 & 6 12/29/17 DT55 & DTM55 Ditcher 324-053P 15
Impeller S/N 622369+ Section 3: Drive 27713 16 DT55 & DTM55 Ditcher 324-053P 12/29/17
Impeller S/N 622369+ Section 3: Drive Ref. Part No. Part Description Comments Revision 5. dwg27713 324-078K 324-079H 802-106C 803-037C 820-386C Drawing Image Number IMPELLER ASSY. IMPELLER WELDMENT RHSNB 1/2-13X1 1/2 GR5 NUT HEX WHIZ 1/2-13 PLT IMPELLER CUTTING EDGE 12/29/17 DT55 & DTM55 Ditcher 324-053P 17
Clutch Shear Bolt (387505) Section 4: Driveline 35757 18 DT55 & DTM55 Ditcher 324-053P 12/29/17
Clutch Shear Bolt (387505) Section 4: Driveline Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. dwg35757 387505 349784 304123 099601 387508 802-611C 803-280C 702351 304011 Drawing Image Number WS SHEARBOLT CLUTCH * WS SHEAR YOKE WS GREASE ZERK WS BALL WS HUB 1 3/4"-20 SPLINE HHCS M10X5X60 GR8.8 NUT HEX NYLOCK M10X5 PLT WS BOLT M16 X 80-8.8 WS LOCK NUT M16 24 balls needed 12/29/17 DT55 & DTM55 Ditcher 324-053P 19
Driveline 1000 RPM 1 3/4" (826-303C) Walterscheid Section 4: Driveline Applies to DTM55 26871 20 DT55 & DTM55 Ditcher 324-053P 12/29/17
Driveline 1000 RPM 1 3/4" (826-303C) Walterscheid Section 4: Driveline Applies to DTM55 Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. dwg26871 826-303C 387505 312209 304046 097140 818-540C 380371 390257 321256 097133 362434 364915 377437 087276 388957 044321 355155 818-552C 393617 365305 802-611C 803-280C 702351 304011 826-586C 359474 Drawing Image Number DRIVELINE W2500 X 40" MIN * WS SHEARBOLT CLUTCH WS CROSS & BEARING KIT 2500 WS SPRING PIN 10 X 90 WS INBOARD YOKE 2500 DECAL DANGER GUARD MISS PTO WS ZERK WS PROF&SLV W.A. 845MM WS IN PROF 2400 (333645) 860MM WS INBOARD YOKE 2400 WS YOKE 1 3/4-20 WS ASSY COLLAR KIT WS SHIELD CONE 7 RIB WS BEARING RING - SC25 WS IN SHIELD RND 770MM DRIVELINE SHIELD SAFETY CHAIN WS SUPPORT BEARING DECAL DANGER PTO DRIVELINE WS OUTER SHEILD TUBE OVAL WS SCREW HHCS M10X5X60 GR8.8 NUT HEX NYLOCK M10X5 PLT WS BOLT M16 X 80-8.8 WS LOCK NUT M16 SHIELD KIT, W2500 WS REINFORCING COLLAR (S/N 940014-) 12/29/17 DT55 & DTM55 Ditcher 324-053P 21
Driveline 1000 RPM 1 3/8" (826-302C) Walterscheid Section 4: Driveline Applies to DTM55 26870 22 DT55 & DTM55 Ditcher 324-053P 12/29/17
Driveline 1000 RPM 1 3/8" (826-302C) Walterscheid Section 4: Driveline Applies to DTM55 Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. dwg26870 826-302C 387505 312209 304046 097140 818-540C 380371 390257 321256 097133 362430 364915 377437 087276 388957 044321 355155 818-552C 393617 365305 802-611C 803-280C 702351 304011 826-586C 359474 Drawing Image Number DRIVELINE W2500 X 40" MIN * WS SHEARBOLT CLUTCH WS CROSS & BEARING KIT 2500 WS SPRING PIN 10 X 90 WS INBOARD YOKE 2500 DECAL DANGER GUARD MISS PTO WS ZERK WS PROF&SLV W.A. 845MM WS IN PROF 2400 (333645) 860MM WS INBOARD YOKE 2400 WS YOKE 1 3/8-21 SPL. AS WS ASSY COLLAR KIT WS SHIELD CONE 7 RIB WS BEARING RING - SC25 WS IN SHIELD RND 770MM DRIVELINE SHIELD SAFETY CHAIN WS SUPPORT BEARING DECAL DANGER PTO DRIVELINE WS OUTER SHEILD TUBE OVAL WS SCREW HHCS M10X5X60 GR8.8 NUT HEX NYLOCK M10X5 PLT WS BOLT M16 X 80-8.8 WS LOCK NUT M16 SHIELD KIT, W2500 WS REINFORCING COLLAR (S/N 940014-) 12/29/17 DT55 & DTM55 Ditcher 324-053P 23
Driveline 540 RPM (826-301C) Walterscheid Section 4: Driveline Applies to DT55 19607 24 DT55 & DTM55 Ditcher 324-053P 12/29/17
Driveline 540 RPM (826-301C) Walterscheid Section 4: Driveline Applies to DT55 Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. dwg19607 826-301C 387505 312209 304046 097140 818-540C 380371 390257 321256 097133 362428 364915 377437 087276 388957 044321 355155 818-552C 393617 365305 802-611C 803-280C 702351 304011 826-586C 359474 Drawing Image Number DRIVELINE W2500 X 40" MIN * WS SHEARBOLT CLUTCH WS CROSS & BEARING KIT 2500 WS SPRING PIN 10 X 90 WS INBOARD YOKE 2500 DECAL DANGER GUARD MISS PTO WS ZERK WS PROF&SLV W.A. 845MM WS IN PROF 2400 (333645) 860MM WS INBOARD YOKE 2400 WS YOKE 1 3/8"-6 SPL. ASG WS ASSY COLLAR KIT WS SHIELD CONE 7 RIB WS BEARING RING - SC25 WS IN SHIELD RND 770MM DRIVELINE SHIELD SAFETY CHAIN WS SUPPORT BEARING DECAL DANGER PTO DRIVELINE WS OUTER SHEILD TUBE OVAL WS SCREW HHCS M10X5X60 GR8.8 NUT HEX NYLOCK M10X5 PLT WS BOLT M16 X 80-8.8 WS LOCK NUT M16Driveline Walterscheid DTM55 (1000 RPM) (826-302C) 1 3/8" SHIELD KIT, W2500 WS REINFORCING COLLAR (S/N 940014-) 12/29/17 DT55 & DTM55 Ditcher 324-053P 25
Label Placement Table of Contents Section 5: Labels 19546 26 DT55 & DTM55 Ditcher 324-053P 12/29/17
Label Placement Section 5: Labels Ref. Part No. Part Description Comments Revision 5. 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 15. 16. 17. 17. 17. 17. 18. 19. 20. Dwg 19546 324-057A 324-058A 818-896C 838-968C 818-130C 818-240C 818-719C 818-229C 838-963C 818-890C 838-112C 838-287C 818-230C 838-094C 838-111C 818-349C 818-402C 838-295C 818-298C 818-897C 848-159C 818-552C 838-285C 848-809C 838-286C 848-810C 838-415C 818-190C 858-095C Drawing Image Number DECAL BUNDLE DT55 DECAL BUNDLE DTM55 * RPBY 838-968C DECAL LP 6 W/TREE BROWN/GOLD DECAL CAUTION 540 RPM DECAL CAUTION 1000 RPM DECAL CAUTION GENERAL INSTR DECAL AMBER REFLECTOR DECAL LP 10" W/TREE BROWN/GOLD RPBY 838-963C DECAL DANGER PINCHING DECAL THROWN OBJECT DITCHER DECAL RED REFLECTOR DECAL WARNING HYD PRESS LONG DECAL DANGER MOVING PARTS DECAL GREASE 10 HRS LH DECAL GREASE 10 HRS RH DECAL ROTATNG BLADE DT55 SW407 DECAL GREASE 25HRS BLACK/WHITE RPBY 848-159C DECAL LANDPRIDE 10" BROWN/GOLD DECAL DANGER PTO DRIVELINE DECAL DT55 GOLD RPBY 838-285C DECAL DTM55 GOLD RPBY 838-286C DECAL SHELL ALVANIA EP 00 DECAL FLAG DECAL REFLECTOR RED 2X5 Beige Unit Orange Unit & Red Unit S/N + S/N - Only on units with Hydraulic Options Beige Unit Orange Unit & Red Unit Obsolete Obsolete S/N 814044+ 12/29/17 DT55 & DTM55 Ditcher 324-053P 27
Touch-up Paints Section 5: Labels No diagram associated with this Parts List 28 DT55 & DTM55 Ditcher 324-053P 12/29/17
Touch-up Paints Section 5: Labels Ref. Part No. Part Description Comments Revision 821-011C 821-070C 821-054C 821-058C 821-066C 821-067C 821-011CTU 821-070CTU 821-054CTU 821-058CTU 821-066CTU 821-067CTU 821-011CQT 821-070CQT 821-054CQT 821-058CQT 821-066CQT 821-067CQT 821-011CGL 821-070CGL 821-054CGL 821-058CGL 821-066CGL 821-067CGL LP BEIGE SPRAY CAN GLOSS BLACK SPRAY CAN MED. RED SPRAY TRCK/CTR GREEN SPRAY CUTTERS ORANGE SPRAY CAN BLUE SPRAY CAN LP BEIGE TOUCH-UP 5OZ GLOSS BLACK TOUCH-UP 5OZ MED RED TOUCH-UP 5OZ GREEN TOUCH-UP 5OZ ORANGE TOUCH-UP 5OZ BLUE TOUCH-UP 5OZ LP BEIGE QUART GLOSS BLACK QUART MED RED QUART GREEN QUART ORANGE QUART BLUE QUART LP BEIGE GALLON GLOSS BLACK GALLON MED RED GALLON GREEN GALLON ORANGE GALLON BLUE GALLON Spray can Spray can Spray can Spray can Spray can Spray can Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Quart can Quart can Quart can Quart can Quart can Quart can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can 12/29/17 DT55 & DTM55 Ditcher 324-053P 29
Blade Option Table of Contents Section 6: Options & Accessories 20525 30 DT55 & DTM55 Ditcher 324-053P 12/29/17
Section 6: Options & Accessories Blade Option Table of Contents Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. dwg20525 324-002A 324-028A 324-034K 324-031S 301-280D 324-008H 324-008H82 324-008H83 324-018H 324-018H82 324-018H83 324-032H 324-042H 800-080C 802-034C 802-214C 802-331C 803-020C 803-027C 803-034C 804-015C 804-016C 804-023C 804-030C 804-039C 806-126C 820-030C 890-177C 810-005C 805-004C 811-119C 811-332C 811-772C Drawing Image Number BLADE OPTION,RATCHET DT55 BLADE OPTION HYD. DT55 BLADE ASSEMBLY DT55 MOLDBOARD ASSY. DT55 4 MOLDBOARD DT55 BLADE ARM WELDMENT BLADE ARM WELDMENT ORANGE BLADE ARM WELDMENT RED MALE BLADE SLIDE WELD, DITCHER MALE BLD SLIDE WELD, ORANGE MALE BLADE SLIDE WELD, DITCHER RED MOLDBOARD PIVOT WELD DT55 MOLDBOARD PIVOT WELD DT55 GREASE ZERK 1/4-28 THD FORMING HHCS 1/2-13X1 1/4 GR5 RHSNB 1/2-13X1 1/4 GR5 RHSNB 1/2-13X1 3/4 GR5 NUT HEX 1/2-13 PLT NUT HEX 3/4-10 PLT NUT HEX 1 1/4-7 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 3/4 PLT WASHER LOCK 1 1/4 SPRING PLT WASHER FLAT 1 1/4 SAE PLT U-BOLT 3/4-10 X 4 1/32 X 5 3/4 CUTTING EDGE 4 FLAT RATCHET JACK - HEAVY DUT CYL 2X8X12 ROD PIN CLEVIS 1 X 2 3/4 USABLE LG EL 3/8MNPT 9/16MJIC OREL 1/32 9/16MJIC 3/8MNPT HH3/8R2 060 9/16FJIC 3/4MORB Includes items 324-031S, 2, 3, 6, 7,11, 12, 13, 15, 16, 17 & 18 Includes items 1, 5, 8, 9, 10, 13, 14 & 19 Supplied with 5/32 Keeper Pin 12/29/17 DT55 & DTM55 Ditcher 324-053P 31
Chute Option S/N 407820- Section 6: Options & Accessories 20530 32 DT55 & DTM55 Ditcher 324-053P 12/29/17
Chute Option S/N 407820- Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. dwg20538 324-027A 324-006A 324-014H 324-035K 324-036D 805-225C 810-005C 805-004C 811-119C 811-332C 811-558C 890-177C Drawing Image Number CHUTE,HYDRAULIC DT55 CHUTE,RATCHET DT55 MATERIAL CHUTE WELDMENT DITCHER CHUTE ASSEMBLY DT55 CHUTE HINGE PIN COTTER 1/8 X 1 1/2 CYL 2X8X12 ROD PIN CLEVIS 1 X 2 3/4 USABLE LG EL 3/8MNPT 9/16MJIC OREL 1/32 9/16MJIC 3/8MNPT HH3/8R2 085 3/4MORB 9/16FJIC RATCHET JACK - HEAVY DUTY Supplied with 5/32 Keeper Pin 12/29/17 DT55 & DTM55 Ditcher 324-053P 33
Chute Option S/N 407821+ Section 6: Options & Accessories 22443 34 DT55 & DTM55 Ditcher 324-053P 12/29/17
Chute Option S/N 407821+ Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 1 dwg22443 324-070A 324-071A 324-036D 324-067H 805-225C 810-005C 805-004C 811-119C 811-332C 811-558C 818-229C 818-230C 818-890C 838-963C 838-094C 838-112C 890-177C Drawing Image Number MATERIAL CHUTE ASSY MANUAL MATERIAL CHUTE ASSY HYD CHUTE HINGE MATERIAL CHUTE WELDMENT PIN COTTER 1/8 X 1 1/2 CYL 2X8X12 ROD PIN CLEVIS 1 X 2 3/4 USABLE LG EL 3/8MNPT 9/16MJIC OREL 1/32 9/16MJIC 3/8MNPT HH3/8R2 085 3/4MORB 9/16FJIC DECAL AMBER REFLECTOR DECAL RED REFLECTOR RPBY 838-963C DECAL LP 10" W/TREE BROWN/GOLD DECAL WARNING HYD PRESS LONG DECAL DANGER PINCHING RATCHET JACK - HEAVY DUT Supplied with 5/32 Keeper Pin 12/29/17 DT55 & DTM55 Ditcher 324-053P 35
Depth Shoe Option (S/N 340077-) Section 6: Options & Accessories 20531 36 DT55 & DTM55 Ditcher 324-053P 12/29/17
Depth Shoe Option (S/N 340077-) Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision 5. 6. dwg20531 324-036A 324-015H 802-034C 802-155C 803-013C 804-015C 804-017C Drawing Image Number DT55 DEPTH SHOE OPTION DT55 DEPTH SHOE HHCS 1/2-13X1 1/4 GR5 RHSNB 3/8-16X1 1/4 GR5 NUT LOCK 3/8-16 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT 12/29/17 DT55 & DTM55 Ditcher 324-053P 37
Depth Shoe Option (S/N 340078+) Section 6: Options & Accessories 20611 38 DT55 & DTM55 Ditcher 324-053P 12/29/17
Depth Shoe Option (S/N 340078+) Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision 324-056A 324-080A dwg20611 324-076H 324-054H 802-155C 803-013C 890-746C DEPTH SHOE OPTION DT55 DEPTH SHOE BUNDLE DT55 * Drawing Image Number DEPTH SHOE WELDMENT DT55 DEPTH SHOE WELDMENT DT55 RHSNB 3/8-16X1 1/4 GR5 NUT LOCK 3/8-16 PLT TURNBUCKLE 3/4-6 W/CLEVIS ENDS S/N 570446+ S/N 570445- S/N 570446+ S/N 570445- Supplied with pins 12/29/17 DT55 & DTM55 Ditcher 324-053P 39
Gauge Wheel Option Section 6: Options & Accessories 20527 40 DT55 & DTM55 Ditcher 324-053P 12/29/17
Gauge Wheel Option Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 dwg20527 324-050A 324-048H 324-048H82 324-048H 324-049S 802-272C 803-026C 805-081C 805-088C 814-186C 30-437 30-438 30-439S2 53-170 13-304U Drawing Image Number GAUGE WHEEL OPTION DT55 GAUGE WHEEL YOKE WELDMT DT55 GA WHEEL YOKE WLDMT DT55 ORNG GAUGE WHEEL YOKE WELDMT DT55 RED GAUGE WHEEL ASSY. DT55 HHCS 3/4-10X10 GR5 NUT LOCK 3/4-10 PLT PIN HITCH 3/4 X 4 3/8 PIN, HAIR COTTER 3/16 WIRE DIA TIRE 16.5 X 6.50-8 2PLY RIB CARLISLE BEARING CONE CARLISLE BEARING CUP CARLISLE SEAL CARLISLE SPACER CARLISLE TIRE 12/29/17 DT55 & DTM55 Ditcher 324-053P 41
Hydraulic Cylinder (810-005C) Energy Section 6: Options & Accessories 14078 42 DT55 & DTM55 Ditcher 324-053P 12/29/17
Hydraulic Cylinder (810-005C) Energy Section 6: Options & Accessories Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 Dwg 14078 810-005C 0A002526 A-2526 A-1906 B-988 A-1845 82464 83198 810-012C 805-004C Drawing Image Number CYL 2X8X12 ROD SINGLE ACTING * EGY ROD 125DIA W/C RPBY 0A002526 BACKUP RING 2" OD ROD WIPER O-RING 1 1/8" ID X 1 3/8" OD EGY PISTON ROD GUIDE EGY CYLINDER BODY O-RING 1 5/8" ID X 2" OD O-RING 3/4" ID X 7/8" OD EGY PISTON EGY 7/8-14UNF REG HEX LOCK NUT EGY RETAINER RING INTERNAL BACKUP RING 1 3/8" OD CYL SEAL KIT 2 X 8 (ENERGY) PIN CLEVIS 1 X 2 3/4 USABLE LG Obsolete Only found in seal kit 1 Only found in seal kit 1 Only found in seal kit 1 Only found in seal kit 1 Only found in seal kit 1 Only found in seal kit 1 12/29/17 DT55 & DTM55 Ditcher 324-053P 43
Ripper Option Table of Contents Section 6: Options & Accessories 20528 44 DT55 & DTM55 Ditcher 324-053P 12/29/17
Section 6: Options & Accessories Ripper Option Table of Contents Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 dwg20528 324-046A 324-009H 324-009H82 324-009H83 324-047H 324-069D 802-682C 803-027C 803-209C 804-023C 804-025C 805-143C 805-316C 806-126C 820-008C Drawing Image Number RIPPER OPTION DT55 TOOL BAR WELDMENT DT55 TOOL BAR WELDMENT DT55 ORANGE TOOL BAR WELDMENT DT55 RED RIPPER MOUNT WELDMT DT55 RIPPER SHANK DT55 PLOW 3/8-16X2 1/2 GR5 BLK NUT HEX 3/4-10 PLT NUT FLANGE LOCK 3/8-16 PLT WASHER LOCK SPRING 3/4 PLT WASHER FLAT 3/4 SAE PLT PIN HAIR COTTER.120 PLT PIN, 3/4 X 2 33/64 USABLE U-BOLT 3/4-10 X 4 1/32 X 5 3/4 DANISH TINE TOOTH 1 1/2 WIDE 12/29/17 DT55 & DTM55 Ditcher 324-053P 45
The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page 044321...21, 23, 25 087276...21, 23, 25 097133...21, 23, 25 097140...21, 23, 25 099601...19 0A002526...43 13-304U...41 30-437...41 30-438...41 30-439S2...41 300-318D...7, 9 301-280D...31 304011...19, 21, 23, 25 304046...21, 23, 25 304123...19 312209...21, 23, 25 316-099D...7, 9 316-100D...7, 9 321256...21, 23, 25 324-002A...31 324-006A...33 324-007H...9 324-007H82...9 324-007H83...9 324-008H...31 324-008H82...31 324-008H83...31 324-009H...45 324-009H82...45 324-009H83...45 324-012D...11, 13 324-012D82...13 324-014H...33 324-015H...37 324-018H...31 324-018H82...31 324-018H83...31 324-020H...7, 9 324-026H...7 324-027A...33 324-028A...31 324-031S...31 324-032H...31 324-034K...31 324-035K...33 324-036A...37 324-036D...33, 35 324-042H...31 324-043D...7 324-043H...11, 15 324-044D...11, 13 324-044D82...13 324-044K...15 324-046A...45 324-047H...45 324-048H...41 324-048H82...41 324-049S...41 324-050A...41 324-051H...11 324-052K...11 324-054H...39 324-056A...39 324-057A...27 324-058A...27 324-060H...13 324-061H...13 324-062K...13 324-067H...35 324-069D...45 324-070A...35 324-071A...35 324-073H...9 324-074H...7 324-076H...39 324-078K...13, 17 324-079H...17 324-080A...39 324-086D...11, 13 324-094D...11 324-102D...13 324-114D...13 349784...19 355155...21, 23, 25 359474...21, 23, 25 362428...25 362430...23 362434...21 364915...21, 23, 25 365305...21, 23, 25 377437...21, 23, 25 380371...21, 23, 25 387505...19, 21, 23, 25 387508...19 388957...21, 23, 25 390257...21, 23, 25 393617...21, 23, 25 53-170...41 702351...19, 21, 23, 25 800-001C...11, 13 800-080C...31 800-312C...11, 13 802-034C...31, 37 802-051C...11 802-066C...13 802-067C...13 802-078C...11, 13 802-079C...11, 13 802-082C...11 802-106C...7, 9, 17 802-155C...7, 37, 39 802-214C...15, 31 802-228C...13 802-233C...11 802-258C...7, 9, 11 802-272C...41 802-331C...31 802-611C...19, 21, 23, 25 802-682C...45 803-006C...11 803-013C...7, 37, 39 803-020C...7, 9, 31 803-026C...11, 13, 41 803-027C...31, 45 803-034C...31 803-037C...15, 17 803-048C...13 803-193C...11 803-209C...13, 45 803-280C...19, 21, 23, 25 804-006C...11, 13 804-013C...11, 13 804-015C...7, 9, 11, 31, 37 804-016C...31 804-017C...7, 9, 11, 37 804-022C...11, 13 804-023C...31, 45 804-025C...45 804-030C...31 804-039C...31 804-185C...11, 13 805-004C...31, 33, 35, 43 805-081C...41 805-088C...41 805-103C...7, 9 805-109C...13 805-143C...45 805-212C...7, 9 805-225C...33, 35 805-255C...7, 9 805-260C...13 805-316C...45 806-126C...31, 45 807-125C...11 808-284C...11, 13 808-285C...11, 13 808-317C...11, 13 809-100C...11, 13 809-210C...11, 13 810-005C...31, 33, 35, 43 810-012C...43 811-119C...31, 33, 35 811-332C...31, 33, 35 811-558C...33, 35 811-769C...11, 13 811-772C...31 814-186C...41 815-118C...11, 13 816-345C...11, 13 816-346C...11, 13 816-347C...11, 13 818-130C...27 818-190C...27 818-229C...27, 35 818-230C...27, 35 818-240C...27 818-298C...27 818-349C...27 818-402C...27 818-540C...21, 23, 25 818-552C...21, 23, 25, 27 818-719C...27 818-890C...27, 35 818-896C...27 818-897C...27 820-008C...45 820-030C...31 820-234C...15 820-242C...15 820-386C...17 820-418C...15 820-419C...15 821-011C...29 821-011CGL...29 821-011CQT...29 821-011CTU...29 821-054C...29 821-054CGL...29 821-054CQT...29 821-054CTU...29 821-058C...29 821-058CGL...29 821-058CQT...29 821-058CTU...29 821-066C...29 821-066CGL...29 821-066CQT...29 821-066CTU...29 821-067C...29 821-067CGL...29 821-067CQT...29 821-067CTU...29 821-070C...29 821-070CGL...29 821-070CQT...29 821-070CTU...29 822-187C...11, 13 82464...43 826-301C...11, 13, 25 826-302C...11, 13, 23 826-303C...11, 13, 21 826-586C...21, 23, 25 827-007C...13 83198...43 838-094C...27, 35 838-111C...27 838-112C...27, 35 838-285C...27 838-286C...27 838-287C...27 838-295C...27 838-415C...27 838-963C...27, 35 838-968C...27 848-159C...27 848-809C...27 848-810C...27 858-095C...27 890-177C...31, 33, 35 890-746C...39 A-1845...43 A-1906...43 A-2526...43 B-988...43 Dwg 14078...43 Dwg 19546...27 Dwg 22438...13 dwg19607...25 dwg20524...7 dwg20525...31 dwg20527...41 dwg20528...45 dwg20531...37 dwg20538...33 dwg20553...15 dwg20611...39 dwg20639...11 dwg22439...9 dwg22443...35 dwg26870...23 dwg26871...21 dwg27713...17 dwg35757...19 NA212-36-BRG...11, 13 NA212-36-COL...11, 13 NF212...11, 13 46 DT55 & DTM55 Ditcher 324-053P 12/29/17
This Page Intentionally Left Blank 12/29/17 DT55 & DTM55 Ditcher 324-053P 47
Great Plains Manufacturing, Inc. Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com