THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL AVIATION This catalog defines rms MIL-DTL-83723, Series III Connectors. There are varieties of connectors within this cylindrical family, with the following options and characteristics available: Two coupling styles: Bayonet and Threaded Plugs and Receptacles. Both coupling styles inter-mate with MIL-DTL-26500 connectors (exception: shell size 8 threaded, does not mate with M26500 threaded). Aluminum and passivated stainless steel versions. A variety of mounting configurations. A variety of material finishes are offered such as electroless nickel, olive drab cadmium and black anodizing. Other finishes are available with a commercial equivalent. A double ended plastic tool is used, where one end is for insertion and the other end is for removal of contacts. Alternate key/keyway positions prevent cross mating of adjacent connectors having the same insert arrangement. Positive alignment of pin contacts by the lead in chamfers of the closed entry hard socket inserts. Raised moisture seal barriers around each pin contact that mate with the lead in chamfers of the hard socket insert. The elastomer grommet is able to seal over a wide range of wire diameters and has a triple wire seal in each cavity. The rear release crimped contact system features a stamped retaining clip captivated by molded in shoulders of each contact cavity in the insulator. This produces a very stable contact. High temperature firewall versions. Can be ordered by military or equivalent rms part numbers. Should you require more information or have a special application need arise, please contact: 8600 Evergreen Blvd. Minneapolis, MN 55433 763.786.1520 800.373.1520 rmsconnectorscs@machine.com 2

Table of Contents How to Order....4 Part Number Definition...5 List of Slash Numbers...6 rms Part Number Definition...7 Shell and Insert Configuration Chart...8 General Performance Characteristics... 11 Exploded View of Connectors.... 13 /71 Connector... 14 Receptacle, Bayonet, Socket Contact, Flange Mount /72 Connector... 15 Receptacle, Bayonet, Pin Contact, Flange Mount /73 Connector... 16 Receptacle, Bayonet, Socket Contact, Single-Hole Mount /74 Connector... 17 Receptacle, Bayonet, Pin Contact, Single-Hole Mount /75 Connector... 18 Plug, Bayonet, Socket Contact /76 Connector... 19 Plug, Bayonet, Pin Contact /77 Connector... 20 Plug, Bayonet, Socket Contact, With RFI Spring /78 Connector... 21 Plug, Bayonet, Pin Contact, With RFI Spring /82 Connector... 22 Receptacle, Socket Contact, Threaded Coupling, Flange Mount /83 Connector... 23 Receptacle, Pin Contact, Threaded Coupling, Flange Mount /84 Connector... 24 Receptacle, Socket Contact, Threaded Coupling, Single-Hole Mount /85 Connector... 25 Receptacle, Pin Contact, Threaded Coupling, Single-Hole Mount /86 Connector... 26 Plug, Socket Contact, Threaded Coupling /87 Connector... 27 Plug, Pin Contact, Threaded Coupling /91 Connector... 28 Plug, Socket Contact, Threaded Coupling, With RFI Spring /92 Connector... 29 Plug, Pin Contact, Threaded Coupling, With RFI Spring /95 Connector... 30 Plug, Socket Contact, Threaded, Without RFI Spring, Self-Locking /96 Connector... 31 Plug, Pin Contact, Threaded, Without RFI Spring, Self-Locking /97 Connector... 32 Plug, Socket Contact, Threaded Coupling, Self-Locking, With RFI Spring /98 Connector... 33 Plug, Pin Contact, Threaded Coupling, Self-Locking, With RFI Spring R0709 Series.... 34 Contacts/Tools... 38 /71 Connector /72 Connector /73 Connector /74 Connector /75 Connector /76 Connector /77 Connector /78 Connector /82 Connector /83 Connector /84 Connector /85 Connector /86 Connector /87 Connector /91 Connector /92 Connector /95 Connector /96 Connector /97 Connector /98 Connector R0709 Series 3

How to Order MIL - DTL - 83723 Series III Step 1. Choose MIL-DTL-83723 or Commercial Connector Type MILITARY # M83723/83 G 22 55 N - LC See page 5 for further definition. COMMERCIAL # R0737 22 G 55 P N - 0 00 See page 7 for further definition. Step 2. Select a Connector Style MILITARY # M83723/83 See page 5 for further definition. COMMERCIAL # R0737 See page 7 for further definition. Step 3. Select a Service Class MILITARY # M83723/83 G See page 5 for further definition. COMMERCIAL # R0737 xx G See page 7 for further definition. Step 4A. Select a Shell Size & Insert Arrangement Chart on Page 7 MILITARY # M83723/83 G 22 55 Step 4B. (for Commercial) Select the Contact Type Commercial # R0737 22 G 55 P P - Pin Contacts S - Socket Contacts Step 5. Select an Alternate Keying Position Use N for normal. Use 6, 7, 8, 9, or Y for alternate keying positions. MILITARY # M83723/83 G 22 55 N COMMERCIAL # R0737 22 G 55 P N Step 6. Select Contacts and Backshell MILITARY # M83723/83 G 22 55 N - LC See page 5 for further definition. COMMERCIAL # R0737 22 G 55 P N - 0 00 See page 7 for further definition. 4

MIL - DTL - 83723 Part Number Definition M83723 /83 G 22 55 N - LC LC - Less Gold Plated Contacts, Seal Plugs and Insertion/Removal Tool Blank - With Gold Plated Contacts, Seal Plugs and Insertion/Removal Tool Shell Polarity/Keying Position N, 6, 7, 8, 9, Y Insert Arrangement Shell Size 08, 10, 12, 14, 16,18, 20, 22, 24 Series Designation (M83723) See Page 7 Style/ Slash Sheet See Page 6 Service/Class A - Anodize (Aluminum Shells) G - Stainless Steel (Passivated) K - MIL Firewall,Stainless Steel, (Passivated) M - Aluminum Shell, Electrodeposited Aluminum, Conductive Finish, Nonreflective, 500 Hours Salt Spray, Fluid Resistant Insert N - MIL Firewall, Shell Ni Plated Stainless Steel (.0001-.0002 Electrodeposited) Plug With RFI Spring, Receptacles (Hermetic) Ni Plated Stainless Steel Plug R - Aluminum Shell, Electroless Ni Plated S - MIL Firewall, Stainless Steel, (Passivated) With RFI Spring, Self-Locking Plug T - Aluminum Shell, Nickel Fluorocarbon Polymer, Conductive Finish, Nonreflective, 500 Hours Salt Spray, Fluid Resistant Insert W - Cadmium Plating (Olive Drab) Conductive 500 Hours Salt Spray Z - Aluminum Shell Zinc Nickel, Conductive Finish, 500 Hours Salt Spray 5

List of Slash Numbers MIL-DTL-83723 Slash Sheets Circular Electric, Environment Resisting /71 Connector, Receptacle, Bayonet, Socket Contact, Flange Mount (A, M, R, T, W, G, Z) /72 Connector, Receptacle, Bayonet, Pin Contact, Flange Mount (A, M, R, T, W, G, Z) /73 Connector, Receptacle, Bayonet, Socket Contact, Single-Hole Mount (A, M, R, T, W, G, Z) /74 Connector, Receptacle, Bayonet, Pin Contact, Single-Hole Mount (A, M, R, T, W, G, Z) /75 Connector, Plug, Bayonet, Socket Contact (A, M, R, T, W, G, Z) /76 Connector, Plug, Bayonet, Pin Contact (A, M, R, T, W, G, Z) /77 Connector, Plug, Bayonet, Socket Contact, With RFI Spring (M, R, T, W, G, Z) /78 Connector, Plug, Bayonet, Pin Contact, With RFI Spring (M, R, T, W, G, Z) /82 Connector, Receptacle, Socket Contact, Threaded Coupling, Flange Mount (A, K, M, R, T, W, G, N, S, Z) /83 Connector, Receptacle, Pin Contact, Threaded Coupling, Flange Mount (A, K, M, R, T, W, G, N, S, Z) /84 Connector, Receptacle, Socket Contact, Threaded Coupling, Single-Hole Mount (A, K, M, R, W, G, N, S, Z) /85 Connector, Receptacle, Pin Contact, Threaded Coupling, Single-Hole Mount (A, K, M, R, T, W, G, N, S, Z) /86 Connector, Plug, Socket Contact, Threaded Coupling (A, K, M, R, T, W, G, Z) /87 Connector, Plug, Pin Contact, Threaded Coupling (A, K, M, R, T, W, G, Z) /91 Connector, Plug, Socket Contact, Threaded Coupling, With RFI Spring (M, R, T, W, G, Z) /92 Connector, Plug, Pin Contact, Threaded Coupling, With RFI Spring (M, R, T, W, G, Z) /95 Connector, Plug, Socket Contact, Threaded, Without RFI Spring, Self-Locking (A, M, R, T, W, G, K, Z) /96 Connector, Plug, Pin Contact, Threaded, Without RFI Spring, Self-Locking (A, M, R, T, W, G, K, Z) /97 Connector, Plug, Socket Contact, Threaded Coupling, Self-Locking, With RFI Spring (N, S) /98 Connector, Plug, Pin Contact, Threaded Coupling, Self-Locking, With RFI Spring (N, S) 6

rms Part Number Definition R073X 22 G 55 P N - 0 00 0 Order Code Cable Clamp Finish Code 0 - Anodize (Black) 1 - Electroless Nickel 2 - Cad Plate w/olive Drab Over Electroless Nickel 3 - Stainless Steel, Passivate 00 - Less Cable Clamp 01 - With 90 Cable Clamp 02 - With Straight Cable Clamp 03 - With 45 Cable Clamp 04 - With 90 Self-locking Cable Clamp 05 - With Straight Self-locking Cable Clamp 06 - With 45 Self-locking Cable Clamp Consult factory for other options. 0 - Less Contacts, Seal Plugs and Insertion/Removal Tool 2 - With Gold Plated Contacts, Seal Plugs and Insertion/Removal Tool Shell Polarity N, 6, 7, 8, 9, 10 Contact Style P - Pin Contact S - Socket Contact Insert Arrangement Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24, 28 Class A - Anodize (Black) G - Stainless Steel, Passivated K - MIL Firewall, Stainless Steel, (Passivated). M - Aluminum Shell, Electrodeposited Aluminum, Conductive Finish, Nonreflective, 500 Hours Salt Spray, Fluid Resistant Insert N - MIL Firewall, Shell Ni Plated Stainless Steel (.0001-.0002 Electrodeposited) With RFI Spring R - Electroless Nickel On Aluminum S - MIL Firewall, Stainless Steel, (Passivated) With RFI Spring, Self-locking Plug T - Aluminum Shell, Nickel Fluorocarbon Polymer, Conductive Finish, Nonreflective, 500 Hours Salt Spray, Fluid Resistant Insert W - Cad Plating, Conductive, 500 Hours Salt Spray Z - Aluminum Shell Zinc Nickel, Conductive Finish, 500 Hours Salt Spray KE - High Temp. Stainless Steel (260 C) Firewall Without RFI Spring, Self-locking SE - High Temp. Stainless Steel (260 C) Firewall With RFI Spring, Self-locking KS - MIL Firewall, Stainless Steel Plug Self-locking Without RFI Spring Series Designation (M83723) R0733 Connector, Plug, Circular, Electric, Environment Resisting, Bayonet, With RFI Spring (/77, /78) R0734 Connector, Plug, Circular, Electric, Environment Resisting, Bayonet, (/75, /76) R0735 Connector, Receptacle, Circular, Electric, Environment Resisting, Bayonet, (/71, /72) R0736 Connector, Plug, Circular, Electric, Environment Resisting, Threaded Coupling, Self-Locking (/95, /96, /97, /98) R0737 Connector, Receptacle, Circular, Electric, Environment Resisting, Threaded (/82, /83) R0738 ESC-10 Design Connector, Plug, Circular, Electric, Environment Resisting, Threaded Coupling, Self-Locking, Stainless Steel R0739 ESC-10 Design Connector, Receptacle, Circular, Electric, Environment Resisting, Threaded Coupling, Stainless Steel R0741 Connector, Receptacle, Circular, Electric, Environment Resisting, Bayonet Coupling, Single-Hole Mount. (/73, /74) R0742 Connector, Receptacle, Circular, Electric, Environment Resisting, Threaded Coupling, Single-Hole Mount (/84, /85) R0743 Connector, Plug, Circular, Electric, Environment Resisting, Threaded Coupling (/86, /87) R0744 Connector, Plug, Circular, Electric, Environment Resisting, Threaded Coupling With RFI Spring (/91, /92) 7

Shell and Insert Configuration Contacts Shell & Insert Quantity Size 08-02 2 20 08-03 3 20 08-98 3 20 10-02 2 20 10-05 5 20 10-06 6 20 10-20 2 16 12-03 3 16 12-12 12 20 14-04 4 12 14-07 7 16 9 20 14-12 3 16 14-15 15 20 16-10 10 16 16-24 24 20 18-08 8 12 18-14 14 16 18-31 31 20 20-16 16 16 19 20 20-25 6 12 24 20 20-28 4 12 37 20 20-39 2 16 20-41 41 20 22-12 12 12 22-19 19 16 26 20 22-32 6 12 27 20 22-39 12 16 22-55 55 20 24-19 19 12 24-30 30 16 23 20 24-43 20 16 55 20 24-57 2 12 24-61 61 20 28-42 42 16 8

Shell and Insert Configuration Continued Shell Size - 8 Shell Size - 10 2 #20 Contacts Insert 8-2 08-02* 3 #20 Contacts Insert 8-3 08-03* 3 #20 Contacts Insert 8-98 08-98* 2 #20 Contacts Insert 10-2 10-02* 5 #20 Contacts Insert 10-5 10-05* 6 #20 Contacts Insert 10-6 10-06* 2 #16 Contacts Insert 10-20 Shell Size - 12 Shell Size - 14 3 #16 Contacts Insert 12-3 12-03* 12 #20 Contacts Insert 12-12 4 #12 Contacts Insert 14-4t 14-04* 7 #16 Contacts Insert 14-7 14-07* 9 #20 Contacts 3 #16 Contacts Insert 14-12 15 #20 Contacts Insert 14-15 Shell Size - 16 Shell Size - 18 10 #16 Contacts Insert 16-10 24 #20 Contacts Insert 16-24 8 #12 Contacts Insert 18-8t 18-08* 14 #16 Contacts Insert 18-14 31 #20 Contacts Insert 18-31 Shell Size - 20 16 #16 Contacts Insert 20-16 19 #20 Contacts 6 #12 Contacts Insert 20-25t 24 #20 Contacts 4 #12 Contacts Insert 20-28t 37 #20 Contacts 2 #16 Contacts Insert 20-39 41 #20 Contacts Insert 20-41 (Continued On Page 10) * - rms Designation t - #1 shielded contact is interchangeable with #12 power contact Insert arrangements are per MIL-STD-1554 except 24-30 and 28-42, which are available to RMS part number only. 9

Shell and Insert Configuration Continued Shell Size - 22 12 #12 Contacts Insert 22-12t 19 #16 Contacts Insert 22-19 26 #20 Contacts 6 #12 Contacts Insert 22-32t 27 #20 Contacts 12 #16 Contacts Insert 22-39t 55 #20 Contacts Insert 22-55 Shell Size - 24 19 #12 Contacts Insert 24-19t 30 #16 Contacts Insert 24-30 23 #20 Contacts 20 #16 Contacts Insert 24-43 Shell Size - 28 55 #20 Contacts 2 #12 Contacts Insert 24-57t 61 #20 Contacts Insert 24-61 * - rms Designation t - #1 shielded contact is interchangeable with #12 power contact Insert arrangements are per MIL-STD-1554 except 24-30 and 28-42, which are available to RMS part number only. 42 #16 Contacts Insert 28-42 10

General MIL - DTL - 83723 Performance Characteristics Test Description Test Requirement Test Result Maintenance Aging Contact Retention Dielectric Withstanding Voltage Altitude and Sea level Thermal Shock Random Vibration Shock Connectors, with contacts loaded shall be coupled and uncoupled 10 times. Remove & reinsert 20% of the contacts (min. of 3) 10 times in both connectors halves. Connectors must meet all succeeding tests. Contact when pushed from either axial direction with a specified load (per contact size) will not be displaced more than.012. Mated & unmated connectors at 110,000 feet altitude shall be tested with 200 volts, at 70,000 feet shall be tested with 375 volts and at 50,000 feet shall be tested at 500 volts. Connectors at sea level shall be tested at 1500 volts. There shall be no evidence of breakdown or flashover. The connector shall be subjected to cycles of -65 C to 200 C for specified duration, five times with no damage. Wired and mated connectors shall be mounted in an appropriate fixture on a vibration table. During vibration there shall be no discontinuities of one microsecond or greater with all contacts wired in a series arrangement. Vibration shall be per specification in two perpendicular axes with no discontinuity or damage. 300 g shock wave per specification without sustaining any discontinuity or damage. Durability Connectors shall be mated and un-mated for cycles specified (500 cycles for Bayonet Type, 250 cycles for Threaded Type). No observable damage. Connectors met or exceeded all requirement of succeeding tests. Met the requirement of.012 or less displacement. There was no evidence of breakdown or flashover. After 5 cycles there was no evidence of cracking, fractures or other damage detrimental to connector operation. There was no discontinuity or evidence of damage. Met requirement of no discontinuity or damage. Met requirements of no damage to connector after mating 250 cycles for t h r e a d e d a n d 5 0 0 f o r b a y o n e t. Salt Spray Ozone Insulation Resistance (Ambient & Elevated temp) Altitude Immersion Temperature Life with Contact Loading No sign of any corrosion when sample is tested in the Salt Spray for the specified time. Mated connectors shall have two hours of exposures at ambient (23 C) temperature with Ozone levels of 100 ppm to 150 ppm. When measured between three adjacent contacts (min.) and three contacts closest to shell and the shell itself, the insulation resistance shall be 5000 megohms between adjacent contacts and the shell and 200 megohms when tested at 200 C. Mated connectors shall be submersed in salt water & cycled per specification. They must then pass the IR & DWV test requirement after the 1st and 3rd cycle. 1000 hours at 200 degrees C with one contact of both samples (mated pair) having a load of 10 lbs applied. Contact retention shall be measured before and after of each sample pair. Mated contact shall be monitored for discontinuities during the test period. Moisture Resistance Subject to 10 cycles of high humidity per specification with last 5 cycles incorporating Hot & Cold. Met requirement of no base metal exposed. No damage occurred to the connector or dielectric material. Insulation Resistance exceeded 5000 megohms at ambient and 200 megohms at elevated temperature. Met requirements for IR and DWV as specified in the test sequence. Met requirements of contact retention/displacement after test with no discontinuities. Met requirements of 100 megohms minimum IR after 10th cycle. (Continued On Page 12) 11

General MIL - DTL - 83723 Performance Characteristics (Continued From Page 11) Test Description Test Requirement Test Result Fluid Immersion Firewall Cavity to Cavity Leakage Contact Walkout Installing and Removal Tool Abuse Pin Stability Retention System Fluid External Bending Moment Accessory Thread Strength Electrolytic Erosion Shell Spring Finger Forces & Conductivity Mated connector pair shall be immersed & cycled in required fluids (10 fluids) without damage. The Coupling Torque shall be measured before and after test and DWV test upon completion of last cycle. Subjected to 2000 F flame for 20 minutes without passing the flame through and while meeting electrical requirements per specification. Apply 1.5 PSI test between contact cavities per specification. Apply a 3 pound pull to contact with a 360 degree fixture per specification for 100 cycles. Contact shall not move out of position. Subject contacts to the specified pressure, rotation & cycles of the insertion and removal tools. Place a side load on the end of the test pin per specification to determine displacement of mating end. Unmated connectors without contacts shall be immersed in fluids & then drained per specification followed by subjecting the connectors to the contact retention test. With the receptacle mounted on a panel, the connector accessory end of the mating Plug connector shall be weighted down per specification. Connector pair mounted as above. Apply the torque to the accessory thread as specified for the plug and receptacle. Salt water solution shall be placed in the mating interface of the pin connector mating area and the voltage applied per specification. RFI grounding spring shall be measured for mating force per specification & shell-to-shell conductivity shall be tested on shells (except Class A). Met requirements of torque and DWV with no damage to mating face or other surfaces. Met requirements of flame test and electrical function. No leakage detected between cavities Contact met requirement of not becoming dislodged from the connector contact cavity. No damage detected with the contact, connector insert or contact retaining mechanism. Met requirements of contact displacement. Met requirement of contact retention test. No damage detected to accessory end. No damage to connector mating or accessory threads. No damage to connector mating face. RFI Grounding Spring met force and shell-to-shell conductivity requirements. RFI Shielding Test RFI shielding effectiveness per specification. Met requirements. 12

Exploded View of Connectors COUPLING RING, THREADED PLUG SHELL, THREADED RETAINER RING GROMMET (PIN) CONTACT RETAINER CLIPS REAR INSERT (PIN) FRONT INSERT (PIN) FACE SEAL RETAINER RING INSERT PLUG ASSEMBLY (PIN) GROMMET (SOCKET) INSERT REAR INSERT (SOCKET) CONTACT RETAINER CLIPS RECEPTACLE, FLANGE MOUNT, THREADED FRONT INSERT (SOCKET) O-RING M83723/82 THREADED RECEPTACLE ASSEMBLY (SOCKET) 13

/71 Series III MIL - DTL - 83723/71 Series III Connector Receptacle Bayonet Socket Contact Flange Mount Class A, M, R, T, W, G, Z (3 Tab Serrations) R0735 xx x xx S N Shell Size Insert rms Series Designation Class Polarity C (2) B (2) 1.300 MAX.540 MAX RMS A (4 HOLES).728/.708 D THREAD.072/.052 SIZE A B C 8 D THREAD.594.812.5000-20UNF 10.719.937.6250-24UNEF 12.812 1.031.7500-20UNEF 14.125.906 1.125.8750-20UNEF 16.116.969 1.250 1.0000-20UNEF 18 1.062 1.343 1.0625-18UNEF 20 1.156 1.437 1.1875-18UNEF 22 1.250 1.562 1.3125-18UNEF 24.154 1.375 1.703 1.4375-18UNEF 28.146 1.562 1.200 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 14

/72 Series III MIL - DTL - 83723/72 Series III Connector Receptacle Bayonet Pin Contact Flange Mount Class A, M, R, T, W, G, Z (3 Tab Serrations) R0735 xx x xx P N Shell Size Insert rms Series Designation Class Polarity C (2) B (2) 1.300 MAX.540 MAX RMS A (4 HOLES).728/.708.072/.052 D THREAD SIZE A B C 8 D THREAD.594.812.5000-20UNF 10.719.937.6250-24UNEF 12.812 1.031.7500-20UNEF 14.125.906 1.125.8750-20UNEF 16.116.969 1.250 1.0000-20UNEF 18 1.062 1.343 1.0625-18UNEF 20 1.156 1.437 1.1875-18UNEF 22 1.250 1.562 1.3125-18UNEF 24.154 1.375 1.703 1.4375-18UNEF 28.146 1.562 1.200 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 15

/73 Series III MIL - DTL - 83723/73 Series III Connector Receptacle Bayonet Socket Contact Single-Hole Mount Class A, M, R, T, W, G, Z (3 Tab Serrations) R0741 xx x xx S N Shell Size Insert rms Series Designation Class Polarity 1.300 MAX A MAX (2).781/.761.539 MAX C THREAD SIZE A MAX (2) B THREAD C THREAD 8.979.6250-20UN.5000-20UNF 10 1.104.7500-20UNEF.6250-24UNEF 12 1.291.9375-20UNEF.7500-20UNEF 14 1.391 1.000-20UNEF.8750-20UNEF 16 1.516 1.125-20UNEF 1.0000-20UNEF 18 1.641 1.2500-18UNEF 1.0625-18UNEF 20 1.766 1.3750-18UNEF 1.1875-18UNEF 22 1.954 1.5000-18UNEF 1.3125-18UNEF 24 2.079 1.6250-18UNEF 1.4375-18UNEF * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. 16

/74 Series III MIL - DTL - 83723/74 Series III Connector Receptacle Bayonet Pin Contact Single-Hole Mount Class A, M, R, T, W, G, Z (3 Tab Serrations) R0741 xx x xx P N Shell Size Insert rms Series Designation Class Polarity 1.300 MAX A MAX (2).781/.761.539 MAX C THREAD SIZE A MAX (2) B THREAD C THREAD 8.979.6250-20UN.5000-20UNF 10 1.104.7500-20UNEF.6250-24UNEF 12 1.291.9375-20UNEF.7500-20UNEF 14 1.391 1.000-20UNEF.8750-20UNEF 16 1.516 1.125-20UNEF 1.0000-20UNEF 18 1.641 1.2500-18UNEF 1.0625-18UNEF 20 1.766 1.3750-18UNEF 1.1875-18UNEF 22 1.954 1.5000-18UNEF 1.3125-18UNEF 24 2.079 1.6250-18UNEF 1.4375-18UNEF * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. 17

/75 Series III MIL - DTL - 83723/75 Series III Connector Plug Bayonet Socket Contact Class A, M, R, T, W, G, Z (3 Tab Serrations) R0734 xx x xx S N Shell Size Insert rms Series Designation Class Polarity A MAX 1.230 MAX.320 MIN RMS SIZE A MAX B THREAD 8.776.5000-20UNF 10.906.6250-24UNEF 12 1.078.7500-20UNEF 14 1.141.8750-20UNEF 16 1.266 1.0000-20UNEF 18 1.375 1.0625-18UNEF 20 1.510 1.1875-18UNEF 22 1.625 1.3125-18UNEF 24 1.760 1.4375-18UNEF 28 2.159 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 18

/76 Series III MIL - DTL - 83723/76 Series III Connector Plug Bayonet Pin Contact Class A, M, R, T, W, G, Z (3 Tab Serrations) R0734 xx x xx P N Shell Size Insert rms Series Designation Class Polarity A MAX 1.230 MAX.320 MIN RMS SIZE A MAX B THREAD 8.776.5000-20UNF 10.906.6250-24UNEF 12 1.078.7500-20UNEF 14 1.141.8750-20UNEF 16 1.266 1.0000-20UNEF 18 1.375 1.0625-18UNEF 20 1.510 1.1875-18UNEF 22 1.625 1.3125-18UNEF 24 1.760 1.4375-18UNEF 28 2.159 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 19

/77 Series III MIL - DTL - 83723/77 Series III Connector Plug Bayonet Socket Contact With RFI Spring Class M, R, T, W, G, Z (3 Tab Serrations) R0733 xx x xx S N Shell Size Insert rms Series Designation Class Polarity 1.230 MAX A MAX.320 MIN RMS RFI SPRING SIZE A MAX B THREAD 8.776.5000-20UNF 10.906.6250-24UNEF 12 1.078.7500-20UNEF 14 1.141.8750-20UNEF 16 1.266 1.0000-20UNEF 18 1.375 1.0625-18UNEF 20 1.510 1.1875-18UNEF 22 1.625 1.3125-18UNEF 24 1.760 1.4375-18UNEF 28 2.159 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 20

/78 Series III MIL - DTL - 83723/78 Series III Connector Plug Bayonet Pin Contact With RFI Spring Class M, R, T, W, G, Z (3 Tab Serrations) R0733 xx x xx P N Shell Size Insert rms Series Designation Class Polarity A MAX 1.230 MAX.320 MIN RMS RFI SPRING SIZE A MAX B THREAD 8.776.5000-20UNF 10.906.6250-24UNEF 12 1.078.7500-20UNEF 14 1.141.8750-20UNEF 16 1.266 1.0000-20UNEF 18 1.375 1.0625-18UNEF 20 1.510 1.1875-18UNEF 22 1.625 1.3125-18UNEF 24 1.760 1.4375-18UNEF 28 2.159 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 21

/82 Series III MIL - DTL - 83723/82 Series III Connector Receptacle Socket Contact Threaded Coupling Flange Mount Class A, K, M, R, T, W, G, Z (3 Serrations) Class N & S (Full Serrations) R0737 xx x xx S N R0737 xx x xx S N Shell Size Insert Shell Size Insert rms Series Designation Class Polarity rms Series Designation Class Polarity 1.240 MAX 1.340 MAX.728/.708 (.580 MAX) E (2) (.480 MAX) E (2).728/.708.072/.052 D (2).072/.052 D (2).160/.010 RMS RMS C (4 HOLES) A THREAD C (4 HOLES) A THREAD * 3 Serrations SIZE A THREAD B THREAD 8.5625-24UNEF.5000-20UNF C D E.594.812 10.6875-24UNEF.6250-24UNEF.719.937 12.8750-20UNEF.7500-20UNEF.812 1.031 14.9375-20UNEF.8750-20UNEF.125.906 1.125 16 1.0625-18UNEF 1.0000-20UNEF.116.969 1.250 18 1.1875-18UNEF 1.0625-18UNEF 1.062 1.343 20 1.3125-18UNEF 1.1875-18UNEF 1.156 1.437 22 1.4375-18UNEF 1.3125-18UNEF 1.250 1.562 24 1.5625-18UNEF 1.4375-18UNEF.154 1.375 1.703 28 1.8125-16UN 1.7500-18UNS.145 1.562 1.200 * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 22

/83 Series III MIL - DTL - 83723/83 Series III Connector Receptacle Pin Contact Threaded Coupling Flange Mount Class A, K, M, R, T, W, G, Z (3 Serrations) Class N & S (Full Serrations) R0737 xx x xx P N R0737 xx x xx P N Shell Size Insert Shell Size Insert rms Series Designation Class Polarity rms Series Designation Class Polarity E (2) D (2) 1.240 MAX 1.340 MAX.728/.708.728/.708 E (2) (.480 MAX) D (2).072/.052 (.580 MAX).072/.052.160/.010 RMS RMS C (4 HOLES) A THREAD C (4 HOLES) A THREAD * 3 Serrations SIZE A THREAD B THREAD 8.5625-24UNEF.5000-20UNF C D E.594.812 10.6875-24UNEF.6250-24UNEF.719.937 12.8750-20UNEF.7500-20UNEF.812 1.031 14.9375-20UNEF.8750-20UNEF.125.906 1.125 16 1.0625-18UNEF 1.0000-20UNEF.116.969 1.250 18 1.1875-18UNEF 1.0625-18UNEF 1.062 1.343 20 1.3125-18UNEF 1.1875-18UNEF 1.156 1.437 22 1.4375-18UNEF 1.3125-18UNEF 1.250 1.562 24 1.5625-18UNEF 1.4375-18UNEF.154 1.375 1.703 28 1.8125-16UN 1.7500-18UNS.146 1.562 1.200 * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 23

/84 Series III MIL - DTL - 83723/84 Series III Connector Receptacle Socket Contact Threaded Coupling Single-Hole Mount Class A, K, M, R, T, W, G, Z (3 Serrations) Class N & S (Full Serrations) R0742 xx x xx S N R0742 xx x xx S N Shell Size Insert Shell Size Insert rms Series Designation Class Polarity rms Series Designation Class Polarity 1.240 MAX 1.340 MAX A MAX (2).781/.761 A MAX (2).781/.761 (.479 MAX) (.580 MAX) D THREAD D THREAD C THREAD C THREAD * 3 Serrations * Full Serration SIZE A MAX (2) B THREAD C THREAD D THREAD 8.980/.949.5625-24UNEF.6250-25UN.5000-20UNF 10 1.104/1.073.6875-24UNEF.7500-20UNEF.6250-24UNEF 12 1.291/1.260.8750-20UNEF.9375-20UNEF.7500-20UNEF 14 1.391/1.360.9375-20UNEF 1.0000-20UNEF.8750-20UNEF 16 1.516/1.485 1.0625-18UNEF 1.1250-18UNEF 1.0000-20UNEF 18 1.641/1.610 1.1875-18UNEF 1.2500-18UNEF 1.0625-18UNEF 20 1.766/1.735 1.3125-18UNEF 1.3750-18UNEF 1.1875-18UNEF 22 1.954/1.923 1.4375-18UNEF 1.5000-18UNEF 1.3125-18UNEF 24 2.079/2.084 1.5625-18UNEF 1.6250-18UNEF 1.4375-18UNEF * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. 24

/85 Series III MIL - DTL - 83723/85 Series III Connector Receptacle Pin Contact Threaded Coupling Single-Hole Mount Class A, K, M, R, T, W, G, Z (3 Serrations) Class N & S (Full Serrations) R0742 xx x xx P N R0742 xx x xx P N Shell Size Insert Shell Size Insert rms Series Designation Class Polarity rms Series Designation Class Polarity 1.240 MAX 1.340 MAX A MAX (2).781/.761 (.479 MAX) A MAX (2).781/.761 (.580 MAX) D THREAD D THREAD C THREAD C THREAD * 3 Serrations * Full Serration SIZE A MAX (2) B THREAD C THREAD D THREAD 8.980/.949.5625-24UNEF.6250-25UN.5000-20UNF 10 1.104/1.073.6875-24UNEF.7500-20UNEF.6250-24UNEF 12 1.291/1.260.8750-20UNEF.9375-20UNEF.7500-20UNEF 14 1.391/1.360.9375-20UNEF 1.0000-20UNEF.8750-20UNEF 16 1.516/1.485 1.0625-18UNEF 1.1250-18UNEF 1.0000-20UNEF 18 1.641/1.610 1.1875-18UNEF 1.2500-18UNEF 1.0625-18UNEF 20 1.766/1.735 1.3125-18UNEF 1.3750-18UNEF 1.1875-18UNEF 22 1.954/1.923 1.4375-18UNEF 1.5000-18UNEF 1.3125-18UNEF 24 2.079/2.084 1.5625-18UNEF 1.6250-18UNEF 1.4375-18UNEF * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. 25

/86 Series III MIL - DTL - 83723/86 Series III Connector Plug Socket Contact Threaded Coupling Class A, K, M, R, T, W, G, Z (3 Tab Serrations) R0743 xx x xx S N Shell Size Insert rms Series Designation Class Polarity 1.180 MAX A.320 MIN RMS SIZE A B THREAD 8.776.5000-20UNF 10.908.6250-24UNEF 12 1.080.7500-20UNEF 14 1.143.8750-20UNEF 16 1.268 1.0000-20UNEF 18 1.377 1.0625-18UNEF 20 1.512 1.1875-18UNEF 22 1.627 1.3125-18UNEF 24 1.762 1.4375-18UNEF 28 2.175 1.3750-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 26

/87 Series III MIL - DTL - 83723/87 Series III Connector Plug Pin Contact Threaded Coupling Class A, K, M, R, T, W, G, Z (3 Tab Serrations) R0743 xx x xx P N Shell Size Insert rms Series Designation Class Polarity A 1.180 MAX.320 MIN RMS SIZE A B THREAD 8.776.5000-20UNF 10.908.6250-24UNEF 12 1.080.7500-20UNEF 14 1.143.8750-20UNEF 16 1.268 1.0000-20UNEF 18 1.377 1.0625-18UNEF 20 1.512 1.1875-18UNEF 22 1.627 1.3125-18UNEF 24 1.762 1.4375-18UNEF 28 2.175 1.3750-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 27

/91 Series III MIL - DTL - 83723/91 Series III Connector Plug Socket Contact Threaded Coupling With RFI Spring Class M, R, T, W, G, Z (3 Tab Serrations) R0744 xx x xx S N Shell Size Insert rms Series Designation Class Polarity A 1.180 MAX.320 MIN RMS RFI SPRING SIZE A B THREAD 8.776.5000-20UNF 10.906.6250-24UNEF 12 1.078.7500-20UNEF 14 1.141.8750-20UNEF 16 1.266 1.0000-20UNEF 18 1.375 1.0625-18UNEF 20 1.510 1.1875-18UNEF 22 1.625 1.3125-18UNEF 24 1.760 1.4375-18UNEF 28 2.175 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 28

/92 Series III MIL - DTL - 83723/92 Series III Connector Plug Pin Contact Threaded Coupling With RFI Spring Class R, W, G (3 Tab Serrations) R0744 xx x xx P N Shell Size Insert rms Series Designation Class Polarity 1.180 MAX A.320 MIN RMS RFI SPRING SIZE A B THREAD 8.776.5000-20UNF 10.906.6250-24UNEF 12 1.078.7500-20UNEF 14 1.141.8750-20UNEF 16 1.266 1.0000-20UNEF 18 1.375 1.0625-18UNEF 20 1.510 1.1875-18UNEF 22 1.625 1.3125-18UNEF 24 1.760 1.4375-18UNEF 28 2.175 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 29

/95 Series III MIL - DTL - 83723/95 Series III Connector Plug Socket Contact Threaded Without RFI Spring Self-Locking Class A, K, R, W, G (3 Tab Serrations) R0736 xx x xx S N Shell Size Insert rms Series Designation Class Polarity 1.180 MAX A.320 MIN RMS SIZE A B THREAD 8.832.5000-20UNF 10.959.6250-24UNEF 12 1.097.7500-20UNEF 14 1.236.8750-20UNEF 16 1.360 1.0000-20UNEF 18 1.473 1.0625-18UNEF 20 1.586 1.1875-18UNEF 22 1.703 1.3125-18UNEF 24 1.846 1.4375-18UNEF 28 2.175 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 30

/96 Series III MIL - DTL - 83723/96 Series III Connector Plug Pin Contact Threaded Without RFI Spring Self-Locking Class A, K, R, W, G (3 Tab Serrations) R0736 xx x xx P N Shell Size Insert rms Series Designation Class Polarity A 1.180 MAX.320 MIN RMS SIZE A B THREAD 8.832.5000-20UNF 10.959.6250-24UNEF 12 1.097.7500-20UNEF 14 1.236.8750-20UNEF 16 1.360 1.0000-20UNEF 18 1.473 1.0625-18UNEF 20 1.586 1.1875-18UNEF 22 1.703 1.3125-18UNEF 24 1.846 1.4375-18UNEF 28 2.175 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 31

/97 Series III MIL - DTL - 83723/97 Series III Connector Plug Socket Contact Threaded Coupling Self-Locking With RFI Spring Class N, S (Full Serrations) R0736 xx x xx S N Shell Size Insert rms Series Designation Class Polarity A MAX 1.280 MAX.160/.010 RMS C THREAD RFI SPRING SIZE A MAX B THREAD CLASS 2B C THREAD 8.967.5625-24UNEF.5000-20UNF 10 1.093.6875-24UNEF.6250-24UNEF 12 1.170.8750-20UNEF.7500-20UNEF 14 1.310.9375-20UNEF.8750-20UNEF 16 1.500 1.0625-18UNEF 1.0000-20UNEF 18 1.562 1.1875-18UNEF 1.0625-18UNEF 20 1.710 1.3125-18UNEF 1.1875-18UNEF 22 1.812 1.4375-18UNEF 1.3125-18UNEF 24 1.948 1.5625-18UNEF 1.4375-18UNEF 28 2.175 1.8125-16UN 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 32

/98 Series III MIL - DTL - 83723/98 Series III Connector Plug Pin Contact Threaded Coupling Self-Locking With RFI Spring Class N, S (Full Serrations) R0736 xx x xx P N Shell Size Insert rms Series Designation Class Polarity A MAX 1.280 MAX.160/.010 RMS RFI SPRING C THREAD SIZE A MAX B THREAD CLASS 2B C THREAD 8.967.5625-24UNEF.5000-20UNF 10 1.093.6875-24UNEF.6250-24UNEF 12 1.170.8750-20UNEF.7500-20UNEF 14 1.310.9375-20UNEF.8750-20UNEF 16 1.500 1.0625-18UNEF 1.0000-20UNEF 18 1.562 1.1875-18UNEF 1.0625-18UNEF 20 1.710 1.3125-18UNEF 1.1875-18UNEF 22 1.812 1.4375-18UNEF 1.3125-18UNEF 24 1.948 1.5625-18UNEF 1.4375-18UNEF 28 2.175 1.8125-16UN 1.7500-18UNS * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. * Size 28 rms part number only. 33

R0709 Series Flange Mount or Single Hole Mount Receptacles The R0709 Series connectors are designed for termination to printed circuit boards, flex circuitry, or may be furnished with solder pin, wire wrap, compliant contact or solder pot contacts. The gold plated contacts are designed for ease of maintenance with insertion and removal accomplished through the front side of the connector eliminating the requirement to disassemble the entire connector from its mounting. The mating interface is compatible with MIL-DTL-26500 and MIL-DTL-83723/75, /76, /77, and /78 Type B Connectors. There are several mounting Flange variations as well as contact termination lengths as shown in the following figures. Consult factory for availability. Not Shown Actual Size Dimensions Master Key Shell Polarity Polarity For Connectors Size 8 and 10 For Connectors Size 12, 14, 16, 18, 20, 22 and 24 A B C D A B C D Normal 105 140 215 265 105 140 215 265 6 102 132 248 320 18 149 192 259 7 80 118 230 312 92 152 222 342 8 35 140 205 275 84 152 204 334 9 64 155 234 304 24 135 199 240 10* 25 115 220 270 98 152 268 338 * Not Available in Size 8 Connector Panel Mounting for Standard Flange Hole Cut-out Shell Size E ±.005 F ±.005 G Dia. /1 +.000.009 J Dia. Max. K Dia. Max. M Dia. Min. N Dia. Min. 8.812.594.125.500.561.620.510 10.937.719.125.620.696.748.635 12 1.031.812.125.750.875.913.750 14 1.125.906.125.871.935.980.885 16 1.250.969.125.996 1.062 1.107 1.010 18 1.343 1.062.125 1.062 1.187 1.209 1.072 20 1.437 1.156.125 1.184 1.312 1.337 1.192 22 1.562 1.250.125 1.312 1.437 1.452 1.322 24 1.703 1.375.154 1.432 1.562 1.577 1.442 1/ Unless Specified Otherwise by Part Number Configuration 34

Flange Mount or Single Hole Mount Receptacles Not Shown Actual Size How to Order rms Catalog Number R0709 10 A 05 P N A 1 1 Termination Pin Length Solder Pin (Type A & D) Wire Wrap (B) Compliant Pin (0) Flange Options 1,2,5,6) (Flange Option 1) (Flange Option 0) 1-.255 ±.020 1 -.750 ±.020 1 -.323 ±.020 2-.935 ±.020 3-.526 ±.020 4-.365 ±.020 5-.965 ±.020 6-.396 ±.020 7-.436 ±.020 8-.978 ±.020 (No Solder Coat) 9-.557 ±.020 Mounting Flange Variation 0 - Square Flange Mount, Standard Thru Holes (4) 1 - Square Flange Mount, Standard Thru Holes (4) 2 - Square Flange Mount, Chamfered Thru Holes (4) 5 - Square Flange Mount, Standard Thru Holes (4), Flange Flush to Rear of Shell 6 - Square Flange Mount, (.142)Thru Holes (4) Contact Type A - Solder Pin Termination B - Wire Wrap Termination C - Compliant Pin Termination with Solder Post D - Solder Pin Termination - No Solder Coat 0 - Compliant Pin Termination with Solder Post Shell Keyway Position N, 6, 7, 8, 9 or 10 Contact Style P - Pin Contact, S - Socket Contact Insert Arrangement Shell Finish A - Hard Anodized Aluminum Shell G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion N - Nickel Plated Aluminum Shell W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24 Series Designation Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts Consult Factory for Other Options (Continued On Next Page) 35

R0709 Series Continued Flange Mount Board Mounting Standoffs Receptacles Standoff with Threaded Insert (4) Shell Size Thread Size 8-14.086-56UNC-2B 16-24.112-40UNC-2B Unless Otherwise Specified in Table Not Shown Actual Size How to Order rms Catalog Number R0709 10 A 05 P N A 4 1 Termination Pin Length Solder Pin (A) Solder Pin (A) Compliant Pin (C) (Flange Options 4,7,8,9 and J) (Flange Option L) (Flange Option M) 1 -.255 ±.020 6 -.524 ±.020 1 -.241 ±.020 2 -.365 ±.020 3 -.526 ±.020 Solder Pin (A) Compliant Pin (C) 4 -.935 ±.020 (Flange Option N) (Flange Option N) 5 -.297 ±.020 1 -.217 ±.020 1 -.235 ±.020 6 -.524 ±.020 Solder Pin (D) (Flange Option J) 5 -.297 ±.020 Mounting Flange Variation 4 - Square Flange Mount, (.157 ±.005) Board Mounting Standoffs,.086-56UNC-2B Threaded Inserts in Mounting Holes (4) 7 - Square Flange Mount, (.225 ±.005) Board Mounting Standoffs, Threaded Inserts in Mounting Holes (4) 8 - Square Flange Mount, (.335 ±.005) Board Mounting Standoffs, Threaded Inserts in Mounting Holes (4) 9 - Square Flange Mount, (.200 ±.005) Board Mounting Standoffs, Threaded Inserts in Mounting Holes (4) J- Square Flange Mount, (.200 ±.005) Board Mounting Standoffs,.112-40UNC-2B Threaded Inserts in Mounting Holes (4) L - Square Flange Mount, (.500 ±.005) Board Mounting Standoffs, Threaded Inserts in Mounting Holes (4) M - Square Flange Mount, (.125 ±.005) Board Mounting Standoffs with Rear Flange Alignment Pin, Chamfered Thru Holes (4) N - Square Flange Mount, (.200 ±.005) Board Mounting Standoffs with Rear Flange Alignment Pin,.112-40UNC-2B Threaded Inserts in Mounting Holes (4) Contact Type A - Solder Pin Termination B - Wire Wrap Termination C - Compliant Pin Termination with Solder Post D - Solder Pin Termination - No Solder Coat 0 - Compliant Pin Termination with Solder Post Shell Keyway Position N, 6, 7, 8, 9 or 10 Contact Style P - Pin Contact, S - Socket Contact Insert Arrangement Shell Finish A - Hard Anodized Aluminum Shell G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion N - Nickel Plated Aluminum Shell W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24 Series Designation Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts Consult Factory for Other Options 36

Single Hole Mount Board Mounting Standoffs Receptacles Not Shown Actual Size How to Order rms Catalog Number R0709 10 A 05 P N A H 1 Termination Pin Length Solder Pin (A) Compliant Pin (C) (Flange Option E, H and K) (Flange Option H) 1 -.159 +.020 1 -.190 ±.020 Compliant Pin (C) Solder Pin (D) (Flange Option K) (Flange Option K) 1 -.173 ±.020 1 -.159 +.020 Mounting Flange Variation E - Square Flange, Single Hole Mount (.150 ±.005) Board Mounting Standoffs, (2).112-40UNC-2B Threaded Inserts in Mounting Holes, (2) Thru Holes H - Square Flange, Single Hole Mount (.150 ±.005) Board Mounting Standoffs, (2).112-40UNC-2B Threaded Inserts in Mounting Holes, (2) Thru Holes. Less Grounding Washer, Friction Washer, and Hexagon Nut K - Square Flange, Single Hole Mount - Less Thread (.200 ±.005) Board Mounting Standoffs,.112-40UNC-2B Threaded Inserts in Mounting Holes (4). Less Grounding Washer, Friction Washer and Hexagon Nut Contact Type A - Solder Pin Termination B - Wire Wrap Termination C - Compliant Pin Termination with Solder Post D - Solder Pin Termination - No Solder Coat 0 - Compliant Pin Termination with Solder Post Shell Keyway Position N, 6, 7, 8, 9 or 10 Contact Style P - Pin Contact, S - Socket Contact Insert Arrangement Shell Finish A - Hard Anodized Aluminum Shell G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion N - Nickel Plated Aluminum Shell W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24 Series Designation Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts Consult Factory for Other Options 37

Contacts/Tools Information MIL - DTL - 83723 Series III Standard Crimp Contacts - Pins Part Numbers/Color Bands Contact Size Pin MS Number rms Part Number Pin Color Bands 1st Band 2nd Band 3rd Band 20 MS39029/4-110 7323-20-2003 Brown Brown Black 16 MS39029/4-111 7323-16-1603 Brown Brown Brown 12 MS39029/4-113 7323-12-1203 Brown Brown Orange Standard Crimp Contacts - Sockets Part Numbers/Color Bands Contact Size Socket MS Number rms Part Number Socket Color Bands 1st Band 2nd Band 3rd Band 20 MS39029/5-115 7260-20-2003 Brown Brown Green 16 MS39029/5-116 7260-16-1603 Brown Brown Blue 12 MS39029/5-118 7260-12-1203 Brown Brown Gray Standard Crimp Contact Rating Contact Size Test Current Standard Crimp Contact Well Diameter Min. Well Depth 20 7.5.049.157 16 13.067.250 12 23.100.250 Standard Sealing Plugs Contact Size Sealing Plug MS Number Inches Color 20 MS27488-20-2 3179-20-0001 Red 16 MS27488-16-2 3179-16-0001 Green 12 MS27488-12-2 3179-12-0001 Orange Tools Insertion/Removal Tool MS Number rms Number Color M81969/14-11 7269-20-0001 Red M81969/14-03 7269-16-0001 Blue M81969/14-04 7269-12-0001 Yellow * Unless otherwise specified, tolerances shall be +/-.005 for three decimal places. 38

83723-3/25/2014

Military and Commercial Aviation Connectors for Demanding Environments Threaded and Bayonet MIL - DTL - 83723 Series III 8600 Evergreen Blvd. Minneapolis, MN 55433 763.786.1520 800.373.1520 rmsconnectorscs@machine.com rmsconnectors.com