FLUID SYSTEMS Products re vilble from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 web: http://mdmetric.com emil: sles@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm copyright 20 mrylnd metrics/crne ltd.
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 CONTENTS Pges to 7 Specifiction PIPE FITTINGS SPECIFICATION Pges 8 to 29 Mlleble iron pipe fittings Pges 0 to 4 Bronze pipe fittings Crne Tper Thred Pipe Fittings Pipe threds on Crne Pipe Fittings re British Stndrd tper to BS EN 0226-2 which replces BS2 (ISO7-) unless otherwise stted. Crne Tper Thred Fittings offer instllers numerous dvntges: Full enggement the whole thred length - relible strong joints No need for hemp filler - fst instlltion, low costs High torques cn be pplied without risk of dmging the fitting Freedom to brek nd re-mke joints Professionl joint ppernce BS EN 0242 BS4 &256 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 2
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 SPECIFICATION SPECIFICATION Pipe threds The mchined threds of Crne fittings re supplied to conform with the guging requirements of BS EN 0226-2 nd BS 2. Threds on ll fittings re chmfered to ssist ssembly nd void ʻcross thredingʼ. Femle fittings hve chmber behind the thred, permitting the mle thred to be ssembled without restriction or ʻbottomingʼ. Design stndrds ISO 49 : 994 is the interntionl stndrd for "Mlleble cst iron fittings threded to ISO 7-. This stndrd ws revised in December 994 nd, compred with the 98 edition, contined some technicl revisions relting to use of lterntive ferrous mterils, hot dip zinc cotings, disptch condition, pressure/temperture rtings, cceptnce tests, mrking nd qulity ssurnce. BS EN 0242 : 995 is the new British Europen Stndrd for "Threded pipe fittings in mlleble cst iron" first published in August 995 nd very closely follows ISO 49 : 994, the min difference being the inclusion of two informtive nnexes relting to "Assessment of conformity" nd the "Reltionship with the essentil requirements of the Construction Products Directive (84/06/EEC)". All Europen Stndrds hve to be dopted by the member countries of the EU nd ny conflicting ntionl stndrds withdrwn. BS4 nd 256: 2000 hs been retined to cover those fittings not in BS EN 0242. It should lso be noted tht BS EN 0242 detils number of fitting types nd sizes which were not included in BS 4 & 256 becuse they were not in regulr demnd nd/or not vilble from UK mnufcturers. BS 4 & 256 : 2000 specifies requirements for the design nd performnce of "Mlleble cst iron nd cst copper lloy threded pipe fittings" nd hs developed over mny yers. BS 4 ws first published in 922 nd BS 256 in 945, subsequently the two stndrds were combined in 968. The BS 4 design requires fittings to hve tper externl threds nd tper internl threds conforming to BS EN 0226 wheres the BS 256 design hs tper externl threds nd prllel internl threds. The 986 revision ws more closely relted to ISO 49 : 98 nd more ccurtely reflected the rnges of fittings vilble from UK mnufcturers. BS 4 & 256 hs lwys been techniclly more demnding thn ISO 49 nd consequently BS EN 0242. BS 4 & 256 were mended in August 995 to delete those fittings now covered by BS EN 0242, so the scope of BS 4 & 256 is now essentilly : () BS 4 design nd BS 256 design fittings in mlleble iron not covered by BS EN 0242, (b) BS 4 design fittings threded to ANSI B.20. (NPT) nd (c) BS 4 design fittings mde in cst copper lloy (bronze) mteril. Conformnce of Crne fittings Both mlleble iron nd steel fittings hve been verified by the British Stndrds Institute (BSI) s conforming to BS EN 0242 nd BS4 & 256, s pproprite, nd s such re permitted to ber the British Stndrds Kitemrk Logo - Kitemrk Licence No. KM0082. Some smll size fittings re mnufctured in steel nd will conform to BS EN 024. The Pressure Equipment Directive 97/2/EC (PED) The Directive pplies to the design, mnufcture nd conformity of pressure equipment nd ssemblies of pressure equipment with mximum llowble pressure greter thn 0.5 br. Individul piping components, such s fittings, re excluded from the scope of the Directive nd therefore cnnot be CE mrked. However Crne mnufctured pipe fittings re RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 SPECIFICATION mnufctured to the pproprite Europen stndrds nd stisfy the essentil sfety requirements of the PED. A Certificte of Incorportion for Pipe Fittings cn be ccessed on the Crne website, or will be provided on request from Crne. Piping instlltion SPECIFICATION Compiled from British nd Interntionl stndrds on Pipe Threds BS EN 0226 (supercedes BS2) nd Pipe Fittings stndrds BS EN 0242, BS 4 & 256 nd ISO 49. Much unnecessry lbour nd cretion of rndom lengths of pipe might be sved by the ppliction of few simple figures by the engineer when erecting the pipe line. Generlly the pipe line, section by section, is either ccommodted within fixed limits, usully the lines of building construction, or is fixed by prescribed dimensions. Except in the cse of continuous run of piping connected either by sockets or flnges, the engineer needs to know the length of pipe required to mke up between fixed positions of fittings prior to cutting nd threding. The digrm below nd tble of 'A' dimensions indictes the length of thred enggement of BS EN 0226 tper pipe threds in nominl sizes 8 to 6 inch. The pproximte pipe length is clculted by using the expression L=C-(B+B2)+2A. PIPE LENGTH L A A CENTRE TO FACE B CENTRE TO CENTRE C CENTRE TO FACE B2 'A' Dimension informtion Fitting A Fitting A size size inches inches 8 7 4 0 8 0 2 4 5 7 4 9 Dimensions given do not llow for tpping or threding tolernces. 2 9 2 24 2 2 27 0 4 6 5 40 6 40 Pipe ends Users re dvised to ensure tht the externl threds on the pipe being screwed into Crne fittings re free from dmge or ny mlformtion nd conform to the guging requirements of BS EN 0226. RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 4
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 SPECIFICATION SPECIFICATION ISO BS EN BS identifiction symbols Crne Fig. No. Symbol Type Mll. Bronze A Elbows 5 J5 A/45 55 J55 A4 52 J5 B Tees 6 J6-6 - C Crosses 7 J7 D Bends 9 - D4 92 - D4/45 56 - - 9 - E Pitcher tees 99 - E2 Twin elbows 97 - Kb Return bends 2 - - Sockets 76 J76 M2 77 - M2 79 J79 M 80 - N4 Bushes 40 J40 N8 Nipples 44 J44 N8 45 J45 P4 Bck nuts 50 J50 T2 Cps 85 J85 T8 Plugs 47 - T8 48 J48 T9 46 - T 49 J49 U Unions 24 U 256 J256 U 27 U 289 - U2 257 - U2 272 - UA Elbow 26 - UA Unions 276 - UA2 262 - UA2 277 - The symbols shown in the bove tble re those given in BS 4 & 256, BS EN 0242 nd ISO 49 for mlleble iron fittings nd in BS 4 & 256 for copper lloy fittings, nd relte to the identifiction of fitting types. 5 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 SPECIFICATION Designtion of fitting size The designtion of fitting size for the fittings shown in this ctlogue is s follows: EQUAL FITTINGS: Equl fittings where ll outlets re the sme size re designted by tht one size, irrespective of the number of outlets. UNEQUAL FITTINGS: Unequl fittings (reducing or enlrging) re specified by the sizes of ech outlet, the sequence being dependent on the number of outlets: () For fittings hving two outlets, the lrger outlet is specified first. Exmple: Fig. No. 45 hexgon reducing nipple with one end threded size 2 nd other end threded size, is designted 2 x (b) For fittings hving more thn two outlets. Crne uses BS EN 0242 method (b) which gives the run s the first nd second sizes of the designtion nd the brnch s the third size of the designtion. This is in contrst to BS EN 0242 method () which gives the run s the first nd third sizes of the designtion nd the brnch s the second size of the designtion. This method is used in certin interntionl mrkets. (Plese see the digrms below for visul explntion). BS EN 0242 method () equivlents re specified in this ctlogue where pplicble. SPECIFICATION UK method BSEN 0242 nd ISO 49 Method (b) s used by Crne. (2) Interntionl method BSEN 0242 nd ISO 49 Method () () () (2) () Fig. No. 6 tees (2) () Fig. No. 6 tees () () (2) () Fig. No. 99 pitcher tees () Fig. No. 99 pitcher tees RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 6
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 SPECIFICATION SPECIFICATION Mlleble cst iron Crne mlleble iron is of the Blckhert type idelly suited to pipe fitting nd mnufcture nd conforms to BS EN 562 Designtion EN-GJMB-00-6, ASTM A97 nd ISO 5922. Typicl properties of Crne mlleble iron re given in the tble below, exceeding the requirements in the bove BS EN, ASTM nd ISO stndrds. Chemicl Mechnicl composition Typicl properties Typicl Totl crbon 2.7% Tensile strength (N/mm 2 ) 40 Silicon.75% Elongtion on 6mm (%) 2 Mngnese 0.69% Izod impct (room temp.) (J) 2 Sulphur 0.8% Brinell hrdness 25 Phosphorous 0.02% Density (g/cm ) 7.56 The close reltionship between the physicl properties of test brs nd ctul cstings ensures design integrity nd the preservtion of high sfety fctors. Shock pressures within pipe systems cn be tolerted with complete sfety. The corrosion resistnce of Crne mlleble iron is good when compred with grey cst iron nd mild steel for most generl pplictions including wter, gs nd stem. Crne bronze Crne bronze hs very good resistnce to corrosion by ggressive wters, stem nd other fluids which promote dezincifiction in certin copper lloys. It is lso suitble for wide rnge of tempertures. Mild steel BS4 nd 256 llow smll size ( 8 nd smller) stright fittings to be supplied in other ferrous mterils e.g. mild steel s n lterntive to mlleble cst iron, providing the mechnicl properties re t lest equivlent to the specified grde of mlleble iron. Individul dt pges stte which Crne fittings re supplied in mild steel. Glvnising Where dditionl resistnce to corrosion is required, mlleble cst iron fittings cn be hot-dip zinc coted (glvnised) prior to mchining. This process involves coting the fittings with zinc which, in ddition to its nturl resistnce to corrosion, provides electro-chemicl protection where the iron of the fitting is exposed by dmge. Mild steel fittings cn be supplied with proprietry zinc bsed coting. The coting weight on Crne glvnised fittings conforms to the requirements of BS EN ISO 46 998 nd ASTM 5 with minimum coting of 60 g/m2 (2oz/ft2) equl to thickness of 86μm (0.004 in). Averge cotings re well in excess of this nd exceed the requirements given in BS EN 0242 nd ISO 49. When ordering glvnised or zinc coted fittings dd the suffix ʻGʼ to the figure number. 7 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 SPECIFICATION Pressure/Temperture rtings BS 4 & 256 : 986 sttes tht fittings re for generl purposes for the trnsmission of fluids within the pressure nd temperture rnges specified. The rtings given re uprted from those in the 968 edition, both for mlleble cst iron nd bronze fittings. The grph below shows the BS pressure temperture rtings. Crne mlleble iron nd bronze fittings re suitble for use t these new rtings with the exception of certin unions (see note Ø below), but such use is dependent on the suitbility of the connecting pipe mteril, the threded joint nd ny thred selnts used. Due considertion should lso be given to ny pplicble codes of prctice. Pressures stted re mximum non-shock guge. SPECIFICATION 2 lbf/in br 0 400 25 00 20 5 200 0 00 5 0 0-20 0 0 B A 25 br t -20 to 20 C* 6 br t -20 to 20 C* 50 00 50 200 SATURATED STEAM LINE 250 00 20 br t 00 C 00 200 00 400 500 600 C F * Hot dip zinc coted (glvnised) fittings should not be used below -0 C (4 F) Bronze fittings cn be used t tempertures below -20 C (-4 F). Refer to Crne for confirmtion of suitbility. Stem, ir, gs Wter BS ref Mteril Fitting type & oil service service 0 br t 00 C BS 4 &256 986 Mll. iron Bronze All pipe fittings (including unions Ø) Grph B Grph A Grph B Grph A Ø Ct. No. 24 unions re limited to 20 C mximum. Ct.Nos. 27, 272, 276, 277 nd 289 unions re limited to 208 C mximum. Testing Production testing: Meets requirements of BS EN 0242 or BS 4 nd 256 s pplicble. Type testing: In ddition to production testing, ll pressure contining fittings re required by BS EN 0242, BS 4 & 256 nd ISO 49 to be designed to withstnd specified design test pressures nd to be type tested ccordingly - 00 br (450 lbf/in 2 ) for sizes 4 nd smller mlleble iron fittings, 64 br (928 lbf/in 2 ) for sizes 5 nd 6 mlleble iron nd ll sizes bronze fittings. Tests crried out show tht production fittings hve sfety mrgins well in excess of the BS requirement. Some typicl burst tests on Crne fittings illustrte their cpbilities - size 2 Fig. No. 9 bend tested to 550 br (8000 lbf/in 2 ) without filure; size Fig. No. 24 flt set union tested to 248 br (600 lbf/in 2 ) without filure; size 6 Fig. No. 5 elbow tested to 90 br (2750 lbf/in 2 ) without filure. Finish All mlleble iron fittings re given n oil finish s protection ginst rust while in stock or during trnsit nd fter instlltion prior to plnt commissioning. Finished fittings re free of ny polycyclic romtic hydrocrbons. Mrking All Crne fittings re mrked with the logo nd where size permits, the fitting size nd Kitemrk symbol. In ddition, some cstings lso disply pttern identifiction number. This is normlly locted next to the bnd of the fitting. This number is used during the mnufcturing process s prt of the rigorous qulity control procedures to ensure consistent high qulity cstings. The number is not of relevnce to the end user of the product. RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 8
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 Fig No. 40 HEXAGON BUSH Fig No. 48 PLAIN PLUG SOLID Fig No. 55 Fig No. 44 HEXAGON NIPPLE Fig No. 49 COUNTERSUNK PLUG Fig No. 56 Fig No. 45 HEXAGON NIPPLE REDUCING Fig No. 50 BACKNUT PARALLEL THREAD TO BS 2779 (ISO 228-) Fig No. 6 Fig No. 46 BEADED PLUG SOLID Fig No. 5 ELBOW Fig No. 6 Fig No. 47 PLAIN PLUG HOLLOW Fig No. 52 M & F ELBOW Fig No. 7 45 ELBOW 45 M&FELBOW TEE M&FTEE CROSS Fig No. 76 Fig No. 77 Fig No. 79 Fig No. 80 Fig No. 85 SOCKET PARALLEL THREAD TO BS 2779 (ISO 228-) SOCKET TAPER THREAD SOCKET REDUCING ECCENTRIC SOCKET CAP Fig No. 9 Fig No. 92 Fig No. 9 Fig No. 97 Fig No. 99 MALE BEND M&FBEND BEND TWIN ELBOW PITCHER TEE Fig No. 2 Fig No. 2 Fig No. 24 Fig No. 256 Fig No. 257 RETURN BEND ROUND FLANGE UNION FLAT SEAT UNION SPHERICAL SEAT IRON TO IRON M & F UNION SPHERICAL SEAT IRON TO IRON Fig No. 26 Fig No. 262 Fig No. 27 Fig No. 272 Fig No. 276 ELBOW UNION SPHERICAL SEAT IRON TO IRON M&FELBOWUNION SPHERICAL SEAT IRON TO IRON UNION SPHERICAL SEAT BRONZE TO IRON M & F UNION SPHERICAL SEAT BRONZE TO IRON ELBOW UNION SPHERICAL SEAT BRONZE TO IRON Fig No. 277 Fig No. 289 Fig No. 290 M & F ELBOW UNION SPHERICAL SEAT BRONZETOIRON UNION SPHERICAL SEAT BRONZE TO BRONZE UNION SELF ALIGNING (SA) 9 BS EN 0242 BS 4 ISO49 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 * Supplied in mild steel. FIG. NO. 40 HEXAGON BUSH f PER 00 * 4 x 8 4 6.4 * 8 x 8 9 9 2.5 * 8 x 4 9 9.60 2 x 8 24 24 4.05 * 2 x 4 24 24.64 2 x 8 24 24.05 4 x 8 26 0 7.56 4 x 4 26 0 6.82 4 x 8 26 0 6.5 4 x 2 26 0 5.0 PN 25 x 4 29 6.67 x 8 29 6.45 x 2 29 6 0.9 x 4 29 6 8.20 4 x 4 46 7.72 4 x 8 46 9.42 4 x 2 46 8.65 4 x 4 46 6.97 4 x 46 4.7 2 x 4 52 2.72 2 x 8 52 2.96 2 x 2 52 25.8 2 x 4 52 2.45 2 x 52 20.82 2 x 4 52.62 2x 8 5 64 40.42 2x 2 5 64 6.5 2x 4 5 64 40.4 2x 5 64 4.4 2x 4 5 64 5.60 2x 2 5 64 29.67 2 2 x 2 40 79 6.02 2 2 x 4 40 79 59.74 2 2 x 40 79 60.6 2 2 x 4 40 79 6.02 2 2 x 2 40 79 6.49 2 2 x2 40 79 49.4 x 2 44 9 85.28 x 4 44 9 85.49 x 44 9 86.50 x 4 44 9 87.70 x 2 44 9 89.5 x2 44 9 90.90 x2 2 44 9 6.76 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 0
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 40 HEXAGON BUSH f PER 00 4x 5 8 49.45 4x 4 5 8 46.62 4x 2 5 8 50.8 4x2 5 8 5.4 4x2 2 5 8 57.69 4x 5 8 8.64 5x4 58 44 20. 6x2 6 7 52.70 6x 6 7 69.67 6x4 6 7 59.47 FIG. NO. 44 HEXAGON NIPPLE f PER 00 * 4 5 2.50 * 8 5 8.9 2 44 2 6.50 4 49 28 9.90 56 46 22.00 4 6 55 4.00 2 6 60 42.0 2 7 72 62.70 2 2 80 77 0.04 89 0 62.2 4 02 24 22.92 6 4 72 492.4 FIG. NO. 45 HEXAGON NIPPLE f PER 00 * 4 x 8 0 5 2. * 8 x 4 5 8 4.02 2 x 4 4 2 6.42 2 x 8 4 2 5.8 4 x 8 48 28 9.2 4 x 2 49 28 9.67 x 2 56 5 5.85 x 4 56 5 5.64 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 * Supplied in mild steel. FIG. NO. 45 HEXAGON PIPE FITTINGS NIPPLE f PER 00 4 x 2 64 44 25.0 4 x 4 64 44 25.9 4 x 64 44 2.48 2 x 64 50 28.94 2 x 4 64 50 29.26 2 x 69 6 48.82 2x 4 69 6 47.05 2x 2 7 62 49.00 2 2 x 2 77 77 74.78 PN 25 x 2 86 90 04.75 x2 2 85 90 09.9 FIG. NO. 46 BEADED PLUG SOLID c f PER 00 4 22 0 2.9 8 24 0.40 2 2 6.89 4 8 4.98 8 9 22.56 4 4 22 2.40 2 45 22 46.60 2 49 26 7.44 FIG. NO. 47 PLAIN PLUG HOLLOW b f PER 00 2 2 2.60 4 26 4 5.0 28 8 7.95 4 24.50 2 5 29 9.25 2 4 2 29.66 2 2 9 5 46. 44 7 7.5 4 46 44 8.28 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 2
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 48 PLAIN PLUG - SOLID b f PER 00 * 8 7 0.72 * 4 8 0.67 8 9 2. 2 2 2 4.6 4 26 4 7.2 28 8 2.66 4 24 22.60 2 5 29 2.20 2 4 2 56.44 FIG. NO. 49 COUNTERSUNK PLUG d f PER 00 8 8.4 2 5 2.7 4 6 4 4.65 9 5 8.5 4 2 20 5.5 2 2 20 2.7 2 26 27 45.20 FIG. NO. 50 BACKNUT Prllel thred to BS 2779 (ISO 228-) f PER 00 * 4 7 22.2 8 8 26 2.7 2 8 2.4 4 9 8 4.2 0 45 6.40 4 55 9.68 2 2 6.64 2 76 2.8 2 2 98 0.8 2 09 59.84 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 * Supplied in mild steel. b FIG. NO. 5 ELBOW PER 00 Equl 8 9 9.2 4 2 2 4.08 8 25 25 5.9 2 28 28 0.80 4 6.70 8 8 25.70 4 45 45 4.40 2 50 50 5.60 2 58 58 82.0 2 2 69 69 4.40 78 78 90.60 4 96 96 287.78 5 5 5 500.57 6 700.00 PN 25 Reducing 8 x 4 2 2 5.47 2 x 4 25 25 8.00 2 x 8 26 26 9.0 4 x 2 0.20 x 2 2 4 8.50 x 4 5 6 22.00 4 x 2 6 4 26.80 4 x 4 6 4 29.0 4 x 42 46.98 2 x 4 9 44.98 2 x 42 46 8.70 2 x 44 5 50.82 2x 2 52 55 67.5 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 4
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 52 M & F ELBOW b PER 00 Equl 8 9 25 2.60 4 2 28 4.4 8 25 2 6.6 2 28 7 8.76 4 4 5.97 8 52 25.4 4 45 60 6.0 2 50 68 44.8 2 58 74 8.02 2 2 69 88 24.48 78 98 69.95 4 96 8 0.79 Reducing 4 x 2 0 40 0.58 x 2 2 5 6.20 x 4 5 46 2.40 FIG. NO. 55 45 ELBOW PER 00 4 9 4.6 8 20 5.44 2 22 7.97 4 25.80 28 8. 4 27.84 2 6 9.9 2 4 62.64 2 2 50 97.4 55 56.90 4 66 257.09 6 88 609.25 5 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 b FIG. NO. 56 45 M & F BEND PER 00 4 9 9.9 8 2 2 4.79 2 22 28 7.58 4 29 29 2.57 5 5 20.9 4 42 42.48 2 48 48 44.04 2 55 55 66.8 2 2 6 6 08.97 68 68 8.64 4 87 87 296.2 PN 25 FIG. NO. 6 TEE BSEN 0242 method (b) method () b PER 00 Equl 8 9 9 4.02 4 2 2 5.4 8 25 25 7.8 2 28 28 4.40 4 2.50 8 8 5.60 4 45 45 58.90 2 50 50 69.0 2 58 58 08.40 2 2 69 69 89.40 78 78 26.09 4 96 96 95. 5 5 5 65.99 6 02.00 Reducing on brnch 8 x 4 2 2 7.55 2 x 4 24 24.97 2 x 8 26 26 2.40 b 4 x 4 26 27.72 4 x 8 28 28 7.70 4 x 2 0 20.20 x 4 28 9.6 x 8 2 5 24.44 x 2 2 5 27.0 x 4 5 6 28.50 4 x 2 4 8 7.00 4 x 4 6 4 4.7 4 x 40 42 46.20 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 6
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 6 TEE b BSEN 0242 method (b) method () b PER 00 Reducing on brnch 2 x 2 6 42 45.40 2 x 4 8 44 47.80 2 x 42 46 54.60 2 x 4 46 48 6.50 2x 2 8 48 60.89 2x 4 40 50 62.58 2x 44 52 77.0 2x 4 48 54 84.80 2x 2 52 55 9.50 2 2 x 2 4 57 84.87 2 2 x 4 44 59 09.90 2 2 x 47 60 05.78 2 2 x 4 52 62 4. 2 2 x 2 55 6 9.77 2 2 x2 6 66 4.60 x 2 5 68 56.96 x 4 47.9 x 4.0 x 4 55 70 69.70 x 2 58 7 77.60 x2 64 7 92.40 x2 2 72 76 228.60 4x 56 8 204.76 4x 4 6 8 220.42 4x 2 64 84 255.0 4x2 70 86 250.08 4x2 2 77 89 76.6 4x 84 92 5.8 6x 92 2 676.7 6x4 05 25 748.0 c Reducing on run 2 x 4 x 2 4 x 2 x 4 BSEN 0242 method (b) method () b c PER 00 2 x 2 x 4 28 28 25 2.26 4 x 4 x 2 22.00 b x 2 x xx 2 8 8 4 24.75 x 4 x xx 4 8 8 6 27.5 4 x 2 x 4 4 x 4 x 2 45 45 8 8.2 4 x 4 x 4 4 x 4 x 4 45 45 4 4.69 4 xx 4 4 x 4 x 45 45 42 46.70 2 x 2 x 2 2 x 2 x 2 50 50 44 58.00 2 x 4 x 2 2 x 2 x 4 50 50 44 49.50 2 xx 2 2 x 2 x 50 50 46 60.62 7 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 BSEN 0242 method (b) method () b c PER 00 Reducing on run 2x 2 x2 2x2x 2 58 58 52 79.77 2x 4x 2 2x2x 4 58 58 52 88.60 2 x x 2 2 x 2 x 58 58 52 92.80 2x 2 x2 2x2x 2 02.60 2 2 x 2 x2 2 2 2 x2 2 x 2 69 69 64 24.68 x 2 x x x 2 78 78 7 9.20 Reducing on run & brnch 2 x 8 x 8 2 x 8 x 8 26 26 25 9.4 FIG. NO. 6 TEE b PN 25 c 4 x 2 x 2 4 x 2 x 2 0 28 9.80 x 4 x 2 x 2 x 4 2 4 0 9.88 x 4 x 4 x 4 x 4 5 6 0.20 4 xx 2 4 x 2 x 6 4 5 6.20 4 xx 4 4 x 4 x 6 4 5 29.25 4 xx 4 x x 40 42 8 44.64 2 xx 2 x x 42 46 8 4.22 2 x 4 x 2 2 x 2 x 4 7 4 45.64 2 x 4 x 2 xx 4 42 46 40 56.90 2 x 4 x 4 2 x 4 x 4 46 48 45 64.00 2x 2 x 2 2x 2 x 2 44 5 4 66.85 2x 2 x 4 2x 4 x 2 44 5 4 70.40 2x 2 x 2xx 2 44 5 4 64.60 2x 2 x 4 2x 4 x 2 48 54 46 7.40 2x 2 x 2 2x 2 x 2 52 55 50 85.50 BSEN 0242 method (b) method () b PER 00 Incresing on brnch 2 x 4 0 5.5 4 x 6 5 26.0 x 4 42 40 5.27 x 2 46 42 42.9 4 x2 54 48 77.5 2 x2 55 52 72.68 2x2 2 66 6 9.77 b RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 8
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 6 M & F TEE FIG. NO. 7 CROSS b PER 00 2 29 4 2.6 4 48 9.85 8 54.9 PER 00 4 2 7.08 8 25 0.04 2 28 5.48 4 2.68 8 7.2 4 45 7.60 2 50 77.5 2 58 0.76 2 2 69 65.7 78 2.8 4 96 447.4 FIG. NO. 76 SOCKET Prllel thred to BS 2779 (ISO 228-) PER 00 * 8 24 2. * 4 27.57 * 8 0 4.5 2 4 6.26 4 9 8.45 42.66 4 49 22. 2 54 29.5 2 64 4.72 2 2 7 75.9 8 0.46 4 94 8.96 9 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 FIG. NO. 77 SOCKET PER 00 4 27.0 8 0 4.7 2 4 7.90 4 9 2.0 42 9.70 4 49 27.50 2 54 6.20 2 64 48.99 2 2 7 80.7 8 05.6 4 94 86.4 6 2 454.64 PN 25 FIG. NO. 79 REDUCING SOCKET PER 00 Reducing * 8 x 4 29 4.7 2 x 4 2 7.8 2 x 8 2 5.26 4 x 4 7.8 4 x 8 7 7.62 4 x 2 7 4.5 x 4 4.4 x 8 4 8.2 x 2 4 8.65 x 4 4 9.0 4 x 2 52 22.2 4 x 4 52 2.55 4 x 52 27.0 2 x 2 59 28.9 2 x 4 59 26.5 2 x 59 27.9 2 x 4 59.2 2x 2 7 4.98 2x 4 7 42.56 2 x 7 52.2 2x 4 7 54.8 2x 2 7 58.6 2 2 x 2 8 62.58 2 2 x 8 64.7 2 2 x 4 8 7.62 2 2 x 2 8 67.28 2 2 x 2 8 7.24 x 94 97.80 x 2 94 95.5 x2 2 94 07.84 4 x 2 6.7 4x2 2 78.9 4 x 20.7 6 x 4 49 44.9 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 20
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 80 ECCENTRIC SOCKET *Suppliedinmildsteel. PER 00 Reducing 4 x 2 7. x 2 4 2. x 4 4 2.86 4 x 2 52 9.92 4 x 4 52 25.0 4 x 52 22. 2 x 2 59 5.64 2 x 4 59 29.68 2 x 59 8.9 2 x 4 59 45.22 2x 2 7 55.8 2x 4 7 57.7 2 x 7 56.44 2x 4 7 47.42 2x 2 7 52.4 2 2 x 2 8 86.40 2 2 x 2 8 99.56 2 2 x 2 8 44.0 x2 94 9.7 x2 2 94.67 FIG. NO. 85 CAP PER 00 * 4 7.2 * 8 9 4.94 2 26 7.6 4 27 7.8 2 5.75 4 2 20.9 2 25.94 2 8 42.8 2 2 4 65.46 44 92.65 4 52 65.8 2 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PER 00 2 45 8.70 4 50.60 6 2.82 4 76 42.66 2 85 56.7 2 02 97.28 FIG. NO. 9 MALE BEND FIG. NO. 92 M & F BEND PN 25 PER 00 4 0 4.9 8 6 6.97 2 45 0.87 4 50 5.8 6 26.27 4 76 45.24 2 85 6.45 2 02 02.54 2 2 4 6.56 27 246.79 4 65 48.5 6 229 25.79 FIG. NO. 9 BEND PER 00 4 0 6.2 8 6 8.84 2 45.40 4 50 9.57 6 2.80 4 76 64.84 2 85 77.5 2 02 20.20 2 2 4 9.58 27 270.68 4 65 486.68 5 76.7 6 229 76.26 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 22
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 97 TWIN ELBOW FIG. NO. 99 PITCHER TEE PER 00 2 45 20.68 4 50 29.66 6 49.2 4 76 88.7 2 85.4 2 02 76.75 2 2 4.94 27 409.2 BSEN 0242 method (b) method () b c PER 00 b c Equl 2 45 45 24 22.06 4 50 50 28 25.45 6 6 40.46 4 76 76 40 70.9 2 85 85 4 96.67 2 02 02 5 64.8 2 2 4 4 6 262.0 27 27 70 5.9 4 65 65 87 608.7 Reducing on brnch 4 x 2 47 48 25 2.88 x 2 49 5 28 29.6 x 4 5 56 0 2.75 4 x 2 5 56 0 40.7 4 x 4 55 58 47.4 4 x 66 68 6 57.26 2 x 2 52 58 29 5.5 2 x 4 55 6 55. 2 x 66 7 6 65.6 2 x 4 77 79 4 94.60 2x 2 54 64 2 72. 2x 4 58 67 5 84.87 2x 70 77 40 96.56 2x 4 80 85 45 4.79 2x 2 9 94 48 6.06 2 2 x 2 60 75 7 5.88 2 2 x 4 60 75 7 5.22 2 2 x 72 85 40.90 2 2 x 4 8 9 45 47.50 2 2 x 2 94 0 48 82.96 2 2 x 2 04 09 54 226.9 2 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 BSEN 0242 method (b) method () FIG. NO. 99 PITCHER TEE b c PER 00 Reducing on brnch x 2 96 09 50 22.76 x 2 06 6 56 266.52 4x2 2 2 69 4.06 4 x 2 9 75 49.7 Reducing on run & brnch 4 x 2 x 2 4 x 2 x 2 47 48 24 20.7 x 4 x 2 x 2 x 4 49 5 25 26.47 x 4 x 4 x 4 x 4 5 54 28. b PN 25 c Reducing on run 4 x 2 x 4 4 x 4 x 2 50 50 27 25.8 FIG. NO. 2 RETURN BEND PER 00 2 8 7.87 4 5 5.7 64 52.22 4 76 92.7 2 89 5.2 2 02 46.6 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 24
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 2 ROUND FLANGE PER 00 Undrilled & unfced 2 95 25.75 4 02 4.0 4 47.90 4 2 5.02 2 7. 2 52 05.27 2 2 65 24.22 84 6.50 4 26 252.5 FIG. NO. 24 UNION FLAT SEAT f PER 00 2 49 42 20.44 4 5 49 0.9 58 57 4.22 FIG. NO. 299 GASKET FOR FIG. NO. 24 (compressed non-sbestos fibre) PER 00 2-4 - - FIG. NO. 256 UNION SPHERICAL SEAT iron to iron f PER 00 4 42 2.4 8 45 6.75 2 49 42 20.70 4 5 49 0.08 58 57 40.75 4 64 68 60.67 2 68 76 78.49 2 75 92 9.89 2 2 84 87.05 92 25 248. 4 07 55 426.52 25 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 b f FIG. NO. 257 M & F UNION PER 00 4 57 2.95 8 6 6 6.07 2 68 56 42 25.85 4 74 74 49 6.77 82 57 57 50.6 4 9 68 74.26 2 95 76 99.95 2 04 92 47.70 2 2 6 22.78 25 24.66 PN 25 FIG. NO. 26 ELBOW UNION c f PER 00 SPHERICAL SEAT iron to iron 2 56 28 42 25.72 4 64 49 7. 72 8 57 54.8 FIG. NO. 262 M & F ELBOW UNION b c f PER 00 SPHERICAL SEAT iron to iron 2 78 28 42 29.89 4 86 49 44.44 98 8 57 62.88 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 26
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 PN 25 FIG. NO. 27 UNION SPHERICAL SEAT bronze to iron f PER 00 8 42 2 2.26 4 42 2.0 8 45 6 4.54 2 49 42 20.69 4 5 49 0. 58 57 40.79 4 64 68 59.64 2 68 76 77.87 2 75 92 20.0 2 2 84 87.5 92 25 247.8 4 07 55 42.60 FIG.NO.272 M&FUNION SPHERICAL SEAT bronze to iron f PER 00 2 68 42 25.4 4 74 49 7.80 82 57 50.99 4 9 68 74.6 2 95 76 98.0 2 04 92 50.28 FIG. NO. 276 ELBOW UNION SPHERICAL SEAT bronze to iron c f PER 00 2 56 28 42 25.6 4 64 49 7.27 72 8 57 55.00 27 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 FIG. NO. 277 M & F ELBOW UNION b c f PER 00 2 78 28 42 0.44 4 86 49 44.7 98 8 57 62.98 SPHERICAL SEAT bronze to iron PN 25 FIG. NO. 289 UNION f PER 00 4 42 2 0.9 8 45 6 4.98 2 49 42 20.97 4 5 49 0.44 58 57 40.99 4 64 68 6. 2 68 76 79.78 2 75 92 2.54 2 2 84 87.72 92 25 248.02 SPHERICAL SEAT bronze to bronze RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 28
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 FIG. NO. 290 UNION f PER 00 2 49 44 22.96 4 52 48 28.66 57 55 7.44 4 67 67 60.00 2 78 76 94.48 2 87 90 4.79 THE CRANE SA (SELF ALIGNING) UNION The Crne SA Union is mde with double sphericl sets. Pipes which re not in lignment cn be securely connected t ny ngle up to 6 of rc from centre line of the union, thus voiding the need for offsets. The union provides pressure tight joint without the use of gskets or wshers. Self ligning (SA) Union Double sphericl sets Iron to iron seting TperthredstoBS2(ISO7-) Blck or Glvnised 29 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 SA Union - femle 6 out of lignment nd still pressure tight RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 0
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 BRONZE PIPE FITTINGS PN 6 BRONZE PIPE FITTINGS Fig No. J40 HEXAGON BUSH Fig No. J44 HEXAGON NIPPLE Fig No. J45 HEXAGON NIPPLE REDUCING Fig No. J50 Fig No. J5 Fig No. J5 Fig No. J48 PLAIN PLUG SOLID Fig No. J6 Fig No. J49 COUNTERSUNK PLUG Fig No. J7 BACKNUT PARALLEL THREAD TO BS 2779 (ISO 228-) ELBOW M&FELBOW TEE CROSS Fig No. J76 Fig No. J79 Fig No. J85 Fig No. J256 SOCKET PARALLEL THREAD TO BS 2779 (ISO 228-) SOCKET REDUCING CAP STRAIGHT UNION RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 FIG. NO. J40 HEXAGON BUSH f PER 00 4 x 8 5 6.40 8 x 8 6 8 2.4 8 x 4 7 9 2.24 2 x 8 22 24 5.67 2 x 4 22 24.29 2 x 8 22 24.89 4 x 4 25 0 6.50 4 x 8 25 0 7.87 4 x 2 25 0 6.07 x 2 28 6 2.98 x 4 28 6 9.68 4 x 2 0 46 22.4 4 x 4 0 46 20.9 4 x 46 6.48 2 x 2 26 5 0.4 2 x 4 26 5 20.09 2 x 26 5 24.7 2 x 4 26 5 5.76 2 x 0 64 48.27 2x 4 0 64 4.6 2x 2 0 64 5.52 f PN 6 MALLEABLE BRONZE PIPE IRON FITTINGS HANGERS AND BRACKETS FIG. NO. J44 HEXAGON NIPPLE f PER 00 4 5 7 2.68 8 6 2 4.45 2 44 2 5. 4 49 28.7 56 5 7.76 4 64 44 29.90 2 64 50 8. 2 7 6 55.5 f FIG. NO. J45 HEXAGON NIPPLE f PER 00 4 x 8 0 5 2. 8 x 4 5 22.99 2 x 8 8 25 4.56 4 x 2 49 28 7.57 x 4 50 8 9.2 4 x 64 44.62 2 x 4 64 50 40.8 2x 2 7 62 59.84 f RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 2
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 BRONZE PIPE FITTINGS PN 6 FIG. NO. J48 PLAIN PLUG SOLID f b b f PER 00 8 5 7 0.7 4 2 0.40 8 2 2.52 2 2 2 5.22 4 26 8.72 28 8 7.76 4 24 28.0 2 5 29 44.8 2 4 2 67.0 FIG. NO. J49 COUNTERSUNK PLUG b f PER 00 f b 8 2 8.5 2 6. 4 7 4 5.42 20 5 0.6 FIG. NO. J50 BACKNUT Prllel thred to BS 2779 (ISO 228-) f PER 00 f 4 7 22.97 8 8 26.2 2 8.5 4 9 8 5.22 0 45 7.6 4 55.64 2 2 6 6.07 2 76 2.70 FIG. NO. J5 ELBOW PER 00 8 6.66 4 2 4.94 8 25 7.00 2 28.47 4.26 8 29.2 4 45 4.20 2 50 57.2 2 58 79.0 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 c 4 2 0 4.50 8 24 7 7.00 2 29 4 0.46 4 48 6.27 8 54 24.8 4 44 62 45.68 2 49 68 60.26 2 60 76 92.0 FIG. NO. J5 M & F ELBOW PER 00 PN 6 BRONZE PIPE FITTINGS FIG. NO. J6 TEE PER 00 4 9 6.76 8 22 9.26 2 26 4. 4 22.80 8 7.7 4 45 7.7 2 50 84.9 2 58 9.58 FIG. NO. J7 CROSS PER 00 2 27 8.69 FIG. NO. J76 SOCKET PER 00 Prllel thred to BS 2779 (ISO 228-) 8 2 2.48 4 25 4.08 8 28 5.27 2 4 7.2 4 9 0.29 42 5.45 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 4
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 BRONZE PIPE FITTINGS PN 6 FIG. NO. J79 REDUCING SOCKET PER 00 8 x 4 26 4.68 2 x 8 4 5.87 4 x 2 7 9.82 x 2 44 4.69 x 4 44 5.88 FIG. NO. J85 CAP PER 00 4 7 2.69 8 22 5.76 2 26 5.46 4 26 9.4 2 4.55 FIG. NO. J256 UNION f PER 00 2 42 42 22.7 4 47 49 29.4 52 57 42.5 4 56 69 67.8 2 62 76 86. 2 65 92 5.45 5 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com 6
Order from: MARYLAND METRICS Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 When you see these signs - you re sfe Suitble for Use with Drinking Wter The British Stndrds Kitemrk mens tht the fittings hve been independently ssessed by BSI to confirm complince with the product stndrds - BSEN 0242 nd BS4 nd 256. Crne kitemrked fittings re deemed to stisfy the requirements of the United Kingdom Wter Regultions (Byelws). Tper Thred fittings This sign mens tht the fitting is mnufctured in the UK by Crne nd hs tper thred. This ensures the fitting engges with the whole thred of the pipe which is lso tpered giving strong, relible joint without the need for hemp filler. Crne Fittings crry the signs to ssure you of the best of British mnufcture. 7 RFQ form: http://mdmetric.com/rfq.htm emil: sles@mdmetric.com
CRANE FLUID SYSTEMS Products re vilble from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 web: http://mdmetric.com emil: sles@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm CRANE HOU5E,EPSILON TERRACE WEST ROAD,IPSWICH SUFFOLK IP 9FJ