Company history 1890: Company founded by Andreas Maier as a lock manufacturer. 1920: Production proram extended to include spanners 1928: Production-line assembly of Fellbach locks. 1951: With the introduction of clampin elements, AMF diversified into the fields of workpiece and tool clampin. 1965: Tole clamps extend the AMF product rane. AMF cataloues are now published in ten lanuaes. 1975: Hydraulic clampin marks further specialisation. 1982: Clampin and fixture systems round off AMF competence in clampin. 1996: Introduction of the AMF Team Oranisation in all business sectors. Quality assurance certified to ISO 9001. Hans-Guenther Maier Manain Director ANDREAS MAIER GmbH & Co. Dear Customers, Since 1890, the name AMF has stood for reliability and the hihest quality. Today our product rane comprises more than 5.000 articles in the sectors clampin, hand tools, and locks. That makes us a leadin European manufacturer. Outstandin products are only one side of the coin. For us, it is just as important to provide our customers with perfect service, day in and day out. We laid the foundations for this in recent years with our modern Team Oranisation. The service from your partner at AMF will be quick, direct, and competent. Our exceptional service has a name: the AMF Service Guarantee. It offers you five sinificant advantaes see them for yourself on this pae. The 2 Service Guarantee We offer you confidence five ways in every aspect of our products. At AMF, the service is riht too. You can rely on us. Guaranteed! Five ways! 1 2 3 4 5 Real technical advice Many tasks and a multitude of solutions. From AMF Professional Products you can find the riht way to solve your problem fast and reliably either at your local dealer or with the help of the specialists in our team. Just call us! Short delivery times From the AMF finished-product stores with over 5.000 articles, we can supply 98 % of orders from stock. And you can be sure that every stock article ordered is despatched the same day. Certified quality AMF stands for painstakin production in our own works. We have followed this tradition since 1890 today, of course, with a modern quality assurance system to ISO 9001. Warranty We believe in the hih quality of our products. Complaints are dealt with quickly, unbureaucratically and enerously as far as possible, even well-beyond the uarantee period. Individual development You cannot find the product you need? Talk to us; we will find the riht solution for you from a special version, riht throuh to a completely new development.
Hexaon keys (metric) Hexaon keys (inch) Ball-ended hexaon keys (metric) TORX -Srewdrivers Bits Hook wrenches Pin wrenches Wrenches for machine tools Open-ended spanners Table of contents For contents of nos see pae 58-59 5-16 17-23 24-29 30-33 34-37 38-43 44-46 47-50 51-53 Socket wrenches Customer specials 54-57 3
Individual to your specific requirements You need an advertisin or company imprint? No problem! All conventional or T-handle screwdrivers in this cataloue can be printed with your individual advertisin or company imprint in any desired colour, or in several colours, usin the very economical tampon printin process. Sample imprints: 15, 16, 19, 21, 24 and 28 If you need a quotation for larer quantities, please let us know how many you require and ive details of your imprint (sinle or multicoloured). 10, 11, 18, 27, 32 7 10, 11, 18, 27, 31 Special tools made to your specific requirements. We will manufacture special tools in an extraordinary variety of forms and sizes to the very hihest quality. Made-to-measure One of our specialities is the manufacturer of special hand tools to the individual needs of the customer. Technical perfection is our standard! The consequences of this quality: - lon workin life - precise application of force, and thus - the reatest possible safety for the user The latest production methods in our own works. If you need it, we can make it! More on paes 55-57! 4
On the subject of screwdrivers 5-16 1. 2. Quality from : There are very ood reasons why a discriminatin user should choose the best quality screwdrivin tools: riorous quality control ensures uniform standards; seen as a whole, more economical, because the unproductive time spent while tools are issued is reduced to the essential minimum; in sizes up to ca. 6 A/F, the torque that can be applied by hand may be hiher than the test torque that is specified in the relevant standard, with the result that: the wrench deforms, but only breaks under very unfavourable conditions, a modest, but valuable contribution is made to safety in the workplace; the true value of quality tools can only be seen in real, practical use. Material Hihly alloyed chrome-vanadium steel tested steel sections in verifiably uniform quality from trusted suppliers ensure low wear for a lon workin-life. 3. 4. Manufacture End faces machined, up to 8 A/F, the edes to the end face are chamfered, from 9 A/F upwards, they are radiused, inspection by samplin at all staes of production. Execution Hardness to DIN standards the values of minimum torque specified for tihtenin screws up to rade 12.9 are achieved or exceeded. 5. Surface finish: blued (version C) nickel-plated (version D) 5
Hexaon key sets (metric) No. 906M Biketool 16-piece multi-purpose tool in pocket format. A professional tool specially for the cyclist, for rapid repair after any breakdown. Tools: hardened and blued. Case: two-component body Item 45666 906M-16 90 x 50 x 32 260 Contents/Equipment: 7 Hexaon keys: 2 2.5-3 - 4-5 - 6 and 8 mm A/F 2 Screwdrivers: + PH2 / -0.8 x 5 3 Socket spanners: 8-9 - 10 mm 3 Open-ended spanners: 8-10 -15 mm 1 Spoke key: 14 G Specifications subject to chane without prior notice. The SCHRAUB-boy as an advertisement In your contacts with customers, there will frequently be occasions when a token of appreciation is helpful. The -SCHRAUB-boy is a sure way of achievin customer awareness. It is not only attractive, practical and handy, but also of outstandin quality. The body can be supplied in other RAL colours. All SCHRAUB-boys can be supplied, in quantities of 100 or more, printed with your company or advertisin imprint (in one or more colours) applied by the tampon printin process, just as you require. Give your business partners a SCHRAUB-boy from Real quality as an advertisin medium will brin you reconition and lon-term success. 6
Hexaon key sets (metric) The SCHRAUB-boy is a super-practical mini-workshop in pocket-knife format. There are four different versions see pae 31 for the TORX version. A really useful addition to professional and d-i-y toolkits. A sinle tool that fits in the palm of your hand and can perform up to 14 functions. Socket, TORX, or Philips screws are no problem, and, when refreshment is called for, there is even a bottle opener. The ideal advertisin medium! Examples of use: No. 910 SCHRAUB-boy Blades:CHROME-VANADIUM, hardened and nickel-plated. Body:plastic-coated steel. Machine tool Item No.. 44875 910 M6 95«28«25 44800 910 M8 95«25«25 180 44693 910 M9 95«28«25 No. 910M6-K Sales display carton. Bicycle assembly Item Contents Carton-size: No. (15 piec.) l«b«h 44701 910 M6-K 910 M6 132«100«87 2850 Ausstattun: Item ISO 2936 DIN ISO 8764 similar to DIN 5264 DIN 659 + 910 M6 2, 2.5, 3, 4, 5 mm size: 1 u. 2 0,5«3.5, 1«7 mm 7, 8, 10, 13 mm 910 M8 2, 2.5, 3, 4, 5, 6 mm size: 1 1«7 mm 7, 8, 10, 13 mm 910 M9 1.5, 2, 2.5, 3, 4, 5, 6 mm size: 1 1«7 mm 7, 8, 10, 13 mm Furniture installation Assemblin show stands In the car and of course Specifications subject to chane without prior notice. 7
Application of our L hexaon keys to ISO 2936 (DIN 911), DIN 6911 and ballended keys. The table shows the across-flats sizes of keys for thread sizes (M) and types of screw. ISO 2936C DIN 911C ( ) not ISO standard thread Hexaon keys (metric) CHROME-VANADIUM, hardened and blued, end face machined, edes of end face chamfered. SW Test torque Hardness Socket screw standards Hexaon Ball-ended ISO 4762 ISO 10642 ISO 4026-4029 mm Nm Nm HRC [DIN 912] DIN 6912 DIN 7984 [DIN 7991] [DIN 913-916] 0.7 0. 08 M1. M1. 4 6 (M1. 8) 0.9 0. 18 M2 1.3 0.53 (M1.4) M2.5 1.5 0.82 0.40 M1.6 M2 M3 2.0 1.90 0.98 M2.5 M3 M3 M4 2.5 3.80 1.60 52 55 M3 M4 M4 M5 3 6.60 2.90 M4 M4 M5 M5 M6 4 16 6.40 M5 M5 M6 M6 M8 5 30 12 M6 M6 M8 M8 M10 6 52 21 M8 M8 M10 M12 (M14) 7 80 M10 8 120 50 M10 M10 M12 M12 M16 10 220 92 M12 M12 M14 M14 M16 (M18) M20 12 370 250 48 52 M14 M14 M16 M18 (M18) M20 (M22) M24 14 590 M16 M18 M16 M18 M20 M22 (M22 M24) 17 980 M20 (M22) M20 M22 M24 19 1360 M24 (M27) M24 M27 22 2110 M30 M30 24 2750 45 50 M33 M33 27 3910 M36 M36 32 4000 M42 36 4000 M48 mm inch mm 42572 42580 00.7 00.9 0.028 * 0.035 * 033«007 033«011 0000.14 0000.20 000 43067 01.3 0.050 * 041«013 0000.70 000 42358 01.5 046.5«015.5 0000.90 000 42366 02.0 5 /64 * 052«018 0001.80 42374 02.5 058.5«020.5 0003.00 000 42382 03.0 066«023 0005.00 000 42390 04.0 5 /32 * 074«029 0010.00 42408 05.0 085«033 0018.00 000 42416 06.0 096«038 0030.00 42424 07.0 9 /3 * 102«041 0043.00 42432 08.0 5 /16 * 108«044 0059.00 000 42440 9 114«047 0079.00 000 42457 10.0 122«050 0103.00 000 42465 11 7 /16 * 129«053 0131.00 42473 12.0 137«057 0160.00 000 42481 14.0 154«070 0260.00 000 42499 17.0 177«080 0430.00 42507 19.0 3 /4 * 199«089 0617.00 000 42515 22.0 7 /8 * 222«102 0920.00 42523 24.0 248«114 1238.00 42531 27.0 277«127 1740.00 42549 30.0 315«142 2410.00 42556 32.0 347«157 3080.00 42564 36.0 391«176 4370.00 Hexaon keys (metric) Preisruppe 4 ISO 2936LC DIN 911LC Hexaon keys (metric), lon version CHROME-VANADIUM, hardened and blued, end face machined, edes of end face chamfered. mm inch mm 43703 43711 01.5 02.0 5 /64 091.5«15.5 * 102«18 001.50 0003.00 000 43729 02.5 114.5«20.5 0005.50 43737 43745 03.0 04.0 5 /32 * 129«023 144«029 0009.00 0018.00 000 43752 05.0 165«033 0032.00 43760 06.0 186«038 0052.00 43778 43786 07.0 08.0 9 /32 5 /16 * * 197«041 208«044 0074.00 0100.00 000 43794 10.0 234«050 0177.00 000 43802 12.0 262«057 287.0 43810 14.0 294«070 440.0 The 1.3 A/F key is in fact 1.27 mm, which is precisely 0.05. ( ) not ISO standard size. Keys marked * correspond to the metric size. Above 4 A/F they are marked with both sizes. Other lenths and versions on request. Specifications subject to chane without prior notice. 8
ISO 2936D DIN 911D Hexaon keys (metric) CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. mm inch mm 43299 01.3 0.050* 041«13 0000.70 000 42630 01.5 046.5«15.5 0000.90 42648 02.5 5/64 * 052«18 0001.80 000 42655 02.5 058.5«20.5 0003.00 000 42663 03.0 066«23 0005.00 42671 04.0 5/32 * 074«29 0010.00 000 42689 05.0 085«33 0018.00 000 42697 06.0 096«38 0030.00 000 42705 07.0 9/32 * 102«41 0043.00 42713 08.0 5/16 * 108«44 0059.00 000 42721 9 114«47 0079.00 000 42739 10.0 122«50 0103.00 000 42747 11 7/16 * 129«53 0131.00 42754 12.0 137«57 0160.00 000 42762 14.0 154«70 0260.00 000 42770 17.0 177«80 0430.00 42788 19.0 3/4 * 199«89 0617.00 000 42796 22.0 7/8 * 222«102 0920.00 Hexaon keys (metric) The 1.3 A/F key is in fact 1.27 mm, which is precisely 0.05. ( ) not ISO standard size. Keys marked * correspond to the metric size. Above 4 A/F they are marked with both sizes. Other lenths and versions on request. ISO 2936LD DIN 911LD Hexaon keys (metric), lon version CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. mm inch mm 42614 42895 01.5 02.0 5/64 091.5«15.5 * 102«18 0001.50 0003.00 000 000 42903 02.5 114.5«20.5 0005.50 42911 42937 03.0 04.0 5/32 * 129«23 144«29 0009.00 0018.00 000 42945 05.0 165«33 0032.00 42952 06.0 186«38 0052.00 43596 07.0 9/32 * 197«41 0074.00 42960 08.0 5/16 * 208«44 0100.00 000 42978 10.0 234«50 0177.00 000 42986 12.0 262«57 0287.00 42994 14.0 294«70 0440.00 43000 17.0 337«80 0750.00 000 43018 19.0 3/4 * 379«89 1100.00 ( ) not ISO standard size. Keys marked * correspond to the metric size. Above 4 A/F they are marked with both sizes. Other lenths and versions on request. Specifications subject to chane without prior notice. 9
Hexaon keys with handles (metric) No. 906S Hexaon keys (metric) with small rip Blade: CHROME-VANADIUM, hardened Grip: and blued. impact-resistant plastic, red. mm inch 47548 1.5 000 000 9 47555 2.5 5/64 * 7 60 95 40 47563 2.5 11 47571 3.0 12 Keys marked * correspond to the metric size... fast for low tihtenin torques e.. for cuttin tool tips! No. 906QL Double hexaon keys (metric) with T-rip Blade: CHROM VANADIUM, hardened Grip: and nickel-plated. impact-resistant plastic, red. (Exception size 8, 10 and 12, rip black) Short arm for final tihtenin! mm inch 47613 4 5/32* 15 85 171 37 47621 5 150 20 110 176 67 47639 6 20 110 176 81 47647 8 5/16* 200 25 115 226 148 47654 10 200 30 140 230 260 47662 12 250 30 140 280 395 Keys marked * correspond to the metric size. Advertisin or company imprint? These conventional or T-handle screwdrivers are specially suitable for printin with your individual advertisin or company imprint usin the economical tampon printin process. If you need larer quantities, ask for our quotation. Please state the quantity required and printin details (one or more colours). See pae 4 for further details. Lon arm for speed! Specifications subject to chane without prior notice. 10
Hexaon keys with handles (metric) No. 906Q Hexaon keys with T-rip (metric) Blade: CHROME-VANADIUM, Grip: hardened and nickel-plated. impact-resistant plastic (cadmium-free), red. Hexaon keys with eronomic T-rip with: shape of rip optimised for comfortable use, permits sensitive tihtenin with full torque, hole for hanin up, for a tidy workplace. mm inch 42242 02,5 5/64 * 100 125 18 42259 46128 02.5 02.5 100 150 80 125 175 24 27 46110 02.5 200 225 30 44958 3 100 125 24 44966 3 150 80 175 30 44974 3 200 225 40 44818 3 350** 100 381 117 44982 4 100 125 31 44990 4 150 80 175 36 45005 4 5 /32 * 200 225 41 46151 4 300 325 50 45138 4 350** 100 381 117 45013 5 100 131 51 42218 5 150 181 60 100 45021 5 200 231 68 46243 5 350 381 100 45153 5 450** 120 488 240 45039 6 100 131 58 45047 6 150 181 77 45054 6 200 100 231 84 46227 6 350 381 130 45062 8 100 131 85 45070 42234 8 8 5 /16 * 150 200 100 181 231 105 125 46250 8 350 381 200 45088 10 100 138 165 45096 10 200 120 238 223 46235 10 350 388 350 45112 12 200 120 238 307 Keys marked * correspond to the metric size. ** with stroner blade Please note: See pae 12 for our workshop stands. Advertisin or company imprint? These conventional or T-handle screwdrivers are specially suitable for printin with your individual advertisin or company imprint usin the economical tampon printin process. If you need larer quantities, ask for our quotation. Please state the quantity required and printin details (one or more colours). See pae 4 for further details. No. 906 Hexaon keys with screwdriver handle (metric) Blade: CHROME-VANADIUM, hardened and nickel-plated. Grip: impact-resistant plastic (cadmium-free), red. mm inch 42200 1.5 90 18 42168 2,0 5/64 * 21 166 25 42184 2.5 90 24 42192 3,0 26 Keys marked * correspond to the metric size. No. 906-TM6 Hexaon key sets (metric) 6-piece sets with screwdriver handles and T-rips in a Miniripba. Item Contents: A/F blade lenth 42226 906-TM6 Nr. 906-2,5 90 und 3 90 Nr. 906Q-4 150, 5 150 355 Nr. 906Q-6 200, 8 200 Specifications subject to chane without prior notice. 11
Hexaon key-sets (metric) No. 906-WM7 M Workshop stand with No. 906 screwdriver-handle keys, and No. 906Q T-rip keys (metric), 7-piece set. Blades: CHROME-VANADIUM, hardened and nickel-plated. Grips: impact-resistant plastic (cadmium-free), red. Stand: plastic-coated metal. Item Contents: A/F «blade lenth 42283 906-WM7 M No. 906 Q 2«90, 2.5 «90, 3 «90 1030 No. 906Q 4 «150,5 «150,6 «200,8 «200 42333 906-WM7 M-L Stand, empty, for No. 906-WM7 M 600 No. 906Q-WM7 Workshop stand with No. 906Q T-rip keys (metric), 7-piece set. Blades: CHROME-VANADIUM, hardened and nickel-plated. Grips: impact-resistant plastic (cadmium-free), red. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. Item Contents: A/F «blade lenth 42606 906Q-WM7 2 «100, 2.5 «100 3 «150, 4 «150, 5 «150, 6 «150, 8 «150 575 42622 906Q-WM7 L Stand, empty, for No. 906Q-WM7 195 T-rip keys in workshop stand are also available with our patented retainin rin, Item 906QF-WM7, pae 23. No. 906-WM9 Workshop stand with No. 906 screwdriver-handle keys, and No. 906Q T-rip keys (metric), 9-piece set. Blades: CHROME-VANADIUM, hardened and nickel-plated. Grips: impact-resistant plastic (cadmium-free), red. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. Item Contents: A/F «blade lenth 42291 906-WM9 No. 906 Q 1.5«90, 2 «90, 2.5 «90, 3 «90 860 No. 906Q 4 «150, 5 «150 No. 906Q 6 «200, 8 «200, 10 «200 Specifications subject to chane without prior notice. 12
Hexaon key-sets (metric) No. 911-WM9 M Workshop stand with metric hexaon keys to ISO 2936 (DIN 911), 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Stand: plastic-coated metal. Item Contents: A/F «blade lenth 44032 911-WM9 M 2.5, 3, 4, 5, 6, 8, 10, 12, 14 mm 1240 44073 911-WM9 M-L Stand, empty for No. 911-WM9 M 590 No. 911L-WM9 M Workshop stand with lon metric hexaon keys to DIN 911L, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Stand: plastic-coated metal. Item Contents: A/F «blade lenth 44040 911L-WM9M 02.5, 3, 4, 5, 6, 8, 10, 12, 14 mm 1700 No. 911-WM9 Workshop stand with metric hexaon keys to ISO 2936, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. Item Contents: A/F «blade lenth 44065 911-WM9 02.5, 3, 4, 5, 6, 8, 10, 12, 14 mm 840 with clips for connectin! No. 911L-WM9 Workshop stand with lon metric hexaon keys to ISO 2936L, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. Item Contents: A/F «blade lenth 44099 911L-WM9 2.5, 3, 4, 5, 6, 8, 10, 12, 14 mm 1310 44016 911L-WM9 L Stand, empty for No. 911L-WM9 195 Specifications subject to chane without prior notice. 13
Hexaon key-sets (metric) No. 911HM Key holders with metric hexaon keys to ISO 2936. Keys: CHROME-VANADIUM, hardened, end face machined, edes of end face chamfered. Holder: polyamide. Item Contents: A/F Blued 89425 911HM9C 01.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 245 Nickel-plated 46482 911HM6D 01.5, 2, 2.5, 3, 4, 5 mm 047 46789 911HM9D 01.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 245 No. 911HM9D Hexaon keys, lon version (ISO 2936L) Item Contents: A/F Blued 89433 911L-HM9C 01.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 415 Nickel-plated 46797 911L-HM9D01.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 415 Hexaon keys in holders are also available with our patented retainin rin, Item 911LF-HM9D, pae 23. No. 911HM9C No. 911L-HM9C No. 911L-HM9D No. 911RM Key rin with metric hexaon keys to ISO 2936. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F 43687 911 RM8 2, 2.5, 3, 4, 5, 6, 8, 10 mm 260 Keys can be removed from their holdin sprins by turnin them slihtly clockwise. The key rin has a quick-action clip. Specifications subject to chane without prior notice. 14
Hexaon key-sets (metric) No. 911TM Key wallets with metric hexaon keys to ISO 2936. Plastic wallet with self-service rack slot and reusable closure. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F 43851 911-TM06 2, 2.5, 3, 4, 5, 6 mm 075 43869 911-TM08 2, 2.5, 3, 4, 5, 6, 8, 10 mm 235 43877 911-TM10 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14 mm 660 Key wallets, lon version (ISO 2936L) Item Contents: A/F 43927 911L-TM7 2, 2.5, 3, 4, 5, 6, 8 mm 230 No. 911L-BM8D Key box with lon metric hexaon keys to ISO 2936, 8-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of Box: end face chamfered. impact-resistant plastic with self-service rack slot. Contents: Box A/F l«b«h 46003 2, 2.5, 3, 4, 5, 6, 8, 10 mm 265«88«17 535 Specifications subject to chane without prior notice. 15
Hexaon key-sets (metric) Nr. 911BM7D Key box with metic hexaon keys to ISO 2936, 7-piece set. Keys: CHROM VANADIUM, hardend and nickel-plated, end face machined, edes Box: of end face chamfered. impact-resistant plastic with self-service rack slot. Contents: Box A/F l«b«h 44826 2, 2.5, 3, 4, 5, 6, 8, mm 133«72«14 175 No. 911BM7-K Sales display carton, contains 10 key boxes No. 911BM7D Carton l«b«h 44859 170«78«120 1910 Nr. 911BM10D Key box with metric hexaon keys to ISO 2936, 8-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes Box: of end face chamfered. impact-resistant plastic with self-service rack slot. Contents: Box A/F l«b«h 46037 2, 2.5, 3, 4, 5, 6, 8, 10 mm 177«88«17 320 No. 911BM10-K Sales display carton, contains 10 key boxes No. 911BM10D Carton l«b«h 44719 178«93«155 3280 Specifications subject to chane without prior notice. 16
Hexaon keys (inch) 17-23 No. 2936DZ Hexaon keys (inch) CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. inch mm mm 43281 0.05 * 01.27 041«13 0000.7 000 43307 1/16 01.59 047«16 0001.0 43315 5/64 * 02 052«18 0001.8 000 43323 3/32 02.38 058«20 0002.0 000 43331 1/80 03.18 066«23 0005.0 43497 9/64 03.57 072«26 0007.0 43349 5/32 * 04 074«29 0010.0 000 43356 3/16 04.76 085«33 0015.0 000 43364 7/32 05.56 091«36 0023.0 43372 1/40 06.35 096«38 0031.0 43380 9/32 * 07 0102«41 0043.0 43398 5/16 * 08 108«44 0059.0 000 43406 43414 3/80 7/16 * 09.53 11 122«50 129«53 0092.0 0131.0 000 43422 1/20 12.70 145«63 0206.0 000 43430 9/16 14.29 154«69 0280.0 43448 5/80 15.88 176«76 0350.0 43455 3/40 * 19 199«89 0617.0 000 43463 7/80 * 22 222«102 0920.0 43471 1000 25.40 275«125 1390.0 000 Keys marked * correspond to the metric size. Above 5/32 A/F they are marked with both sizes. No. 2936LDZ Hexaon keys (inch) lon version inch mm mm 43273 1/16 01.59 92«16 00 01.5.0 000 43505 5/64 * 02 102«18 0003.0 43539 3/32 02.38 114«20 0003.5 43547 1/80 03.18 129«23 0007.4 000 43604 9/64 03.57 140«26 0012.0 43513 5/32 * 04 144«29 0018.0 000 43562 3/16 04.76 165«33 0026.0 43570 43588 7/32 1/40 05.56 06.35 176«36 186«38 0040.0 0054.0 43521 9/32 * 07 207«42 0074.0 000 43554 5/16 * 08 208«44 0100.0 43612 3/80 09.53 234«50 0156.0 000 43638 1/20 12.70 293«63 0360.0 43646 3/40 * 19 379«89 1100.0 Keys marked * correspond to the metric size. Above 5/32 A/F they are marked with both sizes. Specifications subject to chane without prior notice. 17
No. 906QZ Hexaon keys with T-rip (inch) Blade: CHROME-VANADIUM, Grip: hardened and nickel-plated. impact-resistant plastic (cadmium-free), yellow. Hexaon keys (inch) inch mm 45120 5/64 * 2,00 100 080 125 28 44883 3/32 2.38 000 000 000 33 44891 1/8 3.18 150 080 175 37 44909 9/64 3.57 000 000 000 42 45146 00000 100 000 125 38 45252 45260 00000 5/32 * 4,00 150 200 000 080 175 225 45 53 45278 00000 300 000 325 60 44917 3/16 4.76 000 000 73 44925 7/32 5.56 150 100 182 82 44933 1/4 6.35 000 000 93 45286 00000 100 000 132 100 45294 45310 5/16 * 8,00 150 200 100 000 182 232 120 140 45328 00000 350 000 382 215 Keys marked * correspond to the metric size. No. 911-WZ9 Workshop stand with inch hexaon keys to No. 2936DZ, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickelplated, edes of end face chamfered. Contents: A/F 44057 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 1/2 1010 Specifications subject to chane without prior notice. 18
Hexaon key-sets (inch) No. 911HZ 9D Key holders with inch hexaon keys to 2936DZ, 9-piece set. Keys: CHROM VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F 44156 911HZ 9D 1/16 5/64 3/32 1/8 5/32 3/16 1/4 5/16 3/8 232 No. 911L HZ 9D Key holders with inch hexaon keys to No. 2936LDZ, 9-piece set. Keys: CHROM VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F 44164 911LHZ 9D 1/16 5/64 3/32 1/8 5/32 3/16 1/4 5/16 3/8 395 No. 911BZ7 Key box with inch hexaon keys to 2936DZ, 7-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face Box: chamfered. impact-resistant plastic with self-service rack slot. Contents: Box A/F l «b «h 44842 5/64 3/32 1/8 5/32 3/16 7/32 1/4 133«72 «14 140 Specifications subject to chane without prior notice. 19
Hexaon key-sets (inch) No. 911 RZ Key rin with inch hexaon keys to No. 2936DZ, 8-piece set. Keys: CHROM-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F 43695 911RZ8 1/16 5/64 3/321/8 5/32 3/167/321/4 115 Keys can be removed from their holdin sprins by turnin them slihtly clockwise. The key rin has a quick-action clip. No. 911TZ Key wallets with inch hexaon keys to No. 2936DZ. Keys: CHROM VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Plastic wallet with self-service rack slot and reusable closure. Item Contents: A/F 43893 911TZ09 0.05, 1/16 5/64 3/32 1/8 5/32 3/16 7/32 1/4 43901 911TZ11 0.05, 1/16 5/64 3/32 1/8 5/32 43919 911TZ14 3/16 7/32 1/4 5/16 3/8 0.05, 1/16 5/64 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 100 250 850 Specifications subject to chane without prior notice. 20
Hexaon keys with pilot (metric) DIN 6911D Hexaon keys with pilot (metric) for DIN 6912 screws, CHROME-VANADIUM, hardened and nickel-plated. mm mm 45377 3 066«23 005,0 45385 4 074«29 010,0 45393 5 085«33 018,0 45401 6 096«38 030,0 45419 8 108«44 059,0 45427 10 122«50 103,0 45435 12 137«57 160,0 45443 14 154«70 260,0 45450 17 177«80 430,0 DIN 6911 BM7 Key box with hexaon keys to DIN 6911 (metric) with pilot for DIN 6912 screws, 7-piece set. Keys: CHROME-VANADIUM, Box: hardened and nickel-plated impact-resistant plastic. Contents: Box A/F l «b «h 44867 2, 2.5, 3, 4, 5, 6, 8 133 «72 «14 175 Specifications subject to chane without prior notice. 21
Hexaon keys with retainin rin (metric) Hexaon keys with patented retainin rin on the lon end. The touh sprin steel retainin rin on the lon end of these hexaon keys will hold a ISO 4762 socket screw reliably. Whether it be horizontal, vertically upwards, or downwards, the retainin function makes one of these tools the ideal partner when you have to thread a screw into an inaccessible hole and tihten it. Manetisin the end of the key common practice up to now is no loner necessary. No. 911LF-HM9D Key holder with hexaon keys No. 911LF with patented retainin rin and ISO 2936L hexaon keys, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated. Sprin steel retainin rin. Holder: with slot for self-service rack. Contents: A/F 46821 ISO 2936L-1.5, 2, 2,5, 3 No. 911LF-4, 5, 6, 8 und 10 420 Sizes 1.5, 2, 2.5 and 3 have no retainin rin Specifications subject to chane without prior notice. 22
Hexaon keys with retainin rin No. 911LGF-HM9D Key holder with ball-ended hexaon keys No. 911LGF with patented retainin rin and No. 911LG ball-ended hexaon keys, 9-piece set. Keys: CHROME-VANADIUM, hardened and chromium-plated. Sprin steel retainin rin. Holder: with slot for self-service rack. Contents: A/F DIN 911LG-1.5, 2, 2.5, 3 46839 No. 911LGF-4, 5, 6, 8, und 10 Sizes 1.5, 2, 2.5 and 3 have no retainin rin 440 No. 906QF-WM7 Workshop stand with No. 906QF T-rip keys with patented retainin rin and No. 906Q T-rip keys, 7-piece set. Blades: CHROME-VANADIUM, hardened and nickelplated. Sprin steel Grips: retainin rin. impact-resistant plastic (cadmium-free), black. Contents: A/F blade lenth 42309 No. 906Q 2.5, 3 - No. 906QF 4, 5, 6, 8, 10 mm 830 Sizes 2.5 and 3 have no retainin rin Specifications subject to chane without prior notice. 23
Ball-ended hexaon keys (metric) 24-29 Applications At anles up to 25 speeds up work in hard-to-reach locations, easy but still precise entry of key into socket. Material Hihly alloyed chrome-vanadium steel ensures a lon workin-life, ood torque-resistance, and optimum hardness; see table on pae 6 for test torques. Execution and surface finish hardened and blued (version C) hardened and chromium-plated (version D) matt-chrome surface ives excellent corrosion protection. No. 911G-BM10 Key box with ball-ended, metric, short hexaon keys No. 911G, 8-piece set. Keys: CHROME-VANADIUM, hardened and blued, Box: impact-resistant plastic with self-service rack slot. Contents: Box A/F l «b «h 46052 2, 2.5, 3, 4, 5, 6, 8, 10 mm 170 «88 «17 320 24 Specifications subject to chane without prior notice.
No. 911G-C Ball-ended metric hexaon key CHROME-VANADIUM, hardened and blued. Ball-ended hexaon keys (metric) mm mm 46458 0 1.5 46.5«15.5 0 1,0 46474 0 2,0 52«18 0 2,0 46490 0 2.5 58.5«20.5 0 3,0 46516 0 3,0 66«23 0 5,0 46532 0 4,0 74«29 0 11,0 46557 0 5,0 85«33 0 20,0 46573 0 6,0 96«38 0 32,0 46599 0 8,0 108«44 0 65,0 46466 0 10,0 122«50 0113,0 No. 911 G-C No. 911G-TM7 Key wallet with ball-ended, metric, short hexaon keys No. 911G, 7-piece set. Keys: CHROME-VANADIUM, hardened and blued. Plastic wallet with slot for self-service rack and reusable closure. Contents: A/F 46102 1.5, 2, 2.5, 3, 4, 5, 6 mm 75 Specifications subject to chane without prior notice. 25
Ball-ended hexaon keys (metric) No. 911LG-C Ball-ended metric hexaon key, lon version CHROME-VANADIUM, hardened and blued. mm mm 46086 01.5 091.5«15.5 002,0 45898 02,0 102«18 003,0 45823 02.5 114.5«20.5 006,0 45831 03,0 129«23 009,0 45849 04,0 144«29 019,0 45856 05,0 165«33 034,0 45864 06,0 186«38 054,0 45872 08,0 208«44 110,0 45880 10,0 234«50 190,0 46060 12,0 262«57 295,0 No. 911 LG-C No. 911LG-D Ball-ended metric hexaon key, lon version CHROME-VANADIUM, hardened and chromium-plated. mm mm 47209 01.5 091.5«15.5 002,0 47217 02,0 102«18 003,0 47225 02.5 114.5«20.5 006,0 47233 03,0 129«23 009,0 47241 04,0 144«29 019,0 47258 05,0 165«33 034,0 47266 06,0 186«38 054,0 47274 08,0 208«44 110,0 47282 10,0 234«50 190,0 47290 12,0 262«57 295,0 No. 911 LG-D No. 911LG-WM7 Workshop stand with ball-ended metric hexaon keys No. 911LG, 7-piece set. Keys: CHROME-VANADIUM, hardened and chromium-plated. Contents: A/F 46094 2, 2.5, 3, 4, 5, 6, 8 mm 840 No. 911LG-WM9 Key holder with ball-ended metric hexaon keys No. 911LG, 9-piece set. Keys: CHROME-VANADIUM, hardened and blued. Contents: A/F 42341 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 615 Specifications subject to chane without prior notice. 26
Ball-ended hexaon keys (metric) No. 906QG Ball-ended metric hexaon key with T-rip Blade: CHROME-VANADIUM, Grip: hardened and nickel-plated impact-resistant plastic (cadmium-free), red. mm 47118 4 150 80 175 40 47126 5 150 100 181 65 47134 6 150 100 181 80 47142 8 200 100 231 130 No. 906G Grip: Ball-ended metric hexaon key with screwdriver handle Blade: CHROME-VANADIUM, hardened and nickelplated. impact-resistant plastic (cadmium-free), red. mm 45757 2.5 100 180 19 35 45765 03 100 180 19 035 45773 04 100 190 21 050 45781 05 100 190 21 075 45799 06 125 230 24 110 No. 911LG-HMC Key holders with ball-ended metric hexaon keys No. 911LG, 7 or 9-piece set. Keys: CHROME-VANADIUM, hardened and blued, Holder: polyamide. Item Contents: A/F 89409 911LG-HM7C 1.5, 2, 2.5, 3, 4, 5, 6 mm 140 46524 911LG-HM9C 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 440 No. 911LG-HM9D Key holder with ball-ended metric hexaon keys No. 911LG, 9-piece set. Keys: CHROME-VANADIUM, hardened and chromium-plated Holder: polyamide.d. Contents: A/F 46805 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 440 Ball-ended hexaon keys in key holder are also available with our patented retainin rin, Item 911LGF-HM9D, pae 23. No. 911LG-HM7C No. 911LG-HM9D Specifications subject to chane without prior notice. 27
No. 911LG-HM7 D Key holder (Kombiclip) With ball-ended hexaon keys (metric) 911LG, lon version, 7-piece set. Key: CHROM VANADIUM, hardened and nickel-plated. Ball-ended hexaon keys (metric) Contents A/F 46813 1.5, 2, 2.5, 3, 4, 5, 6 mm 150 Applications: The key holder is a convenient, tidy way of storin 7 sizes of key, and can also be used as at T-rip by repositionin the key needed in the holder. No. 911LG-BM8 C Key box with ball-ended metric hexaon keys No. 911LG, 8-piece set. Keys:CHROME-VANADIUM, hardened and blued, Box:impact-resistant plastic with self-service rack slot. Contents:Box A/F l «b«h 46011 2, 2.5, 3, 4, 5, 6, 8, 10 mm 265«88«17 530 No. 911LG-BM8D Key box with ball-ended metric hexaon keys No. 911LG, 8-piece set. Keys:CHROME-VANADIUM, hardened and chromium-plated. Box:impact-resistant plastic with self-service rack slot. Contents:Box A/F l «b«h 46078 2, 2.5, 3, 4, 5, 6, 8, 10 mm 265«88«17 530 Specifications subject to chane without prior notice. 28
No. 911LG-TM8 Key wallet with ball-ended metric hexaon keys No. 911LG, 8-piece set. Keys:CHROME-VANADIUM, hardened and chromiumplated. Plastic wallet with slot for self-service rack and reusable closure. Ball-ended hexaon key-sets (metric) Contents: A/F 43844 1.5, 2, 2.5, 3, 4, 5, 6, 8 mm 250 No. 909G Ball-ended SCHRAUB-boy Blade: hardened and blued Grip:hand-friendly, eronomic twocomponent body 45609 45617 Item 909G-2-6 909G-4-10 mm 2, 2.5, 3, 4, 5, 6 4, 5, 6, 8, 10 120 355 Specifications subject to chane without prior notice. 29
-Screwdrivers 30-33 on the subject of applications for our -screwdrivers. TORX is a reistered trademark of Camcar/Textron Inc. Profile The wave-profile provides a lare surface for force and torque transfer optimum rip and lon tool-life see table on riht for test torques. Material hihly alloyed CHROME-VANADIUM steel Execution and surface finish hardened and blued hardened and chromium-plated Screwdrivers with handle, for -screws, compliment the well-known advantaes of this type of screw. best possible force transfer by handy ripforms. Table showin sockets for thread diameters and types of screw. Test Screws with -sockets torque Metric (M) Self-tappin (ST) DIN DIN DIN DIN DIN DIN DIN DIN DIN 4762 963 964 7984 7985 7991 7981 7972 7973 DIN DIN DIN DIN DIN DIN Sizes mm Nm 912 965 966 6912 7982 7983 T 6 1.70 0.75 * * * * * * * * * T 7 1.99 1.4 * * * * * * * * * T 8 2.31 2.2 2.5 2.5 2.5 2.5 2.9 2.9 2.9 T 9 2.50 2.8 * * T10 2.74 3.7 3 3 3 3 3 3 3.5 3.5 3.5 T15 3.27 6.4 * 3.5 3.5 3.5 3.9 3.9 3.9 T20 3.86 10.5 4 4 4 4 4 4 4.2 4.2 4.2 T25 4.43 15.9 5 5 5 5 5 5 4.8/5.5 4.8/5.5 4.8/5.5 T27 T30 4.99 5.52 22.5 31.1 * 6 * 6 * 6 * 6 * 6 * 6 * 6.3 * 6.3 * 6.3 T40 6.65 54.1 8 8 8 8 8 8 T45 7.82 86.2 * * * * * * * * * T50 8.83 132 10 10 10 10 10 10 T55 11.22 252 12 12 12 *Special screws No. 918-HAT 8C - ball-ended screwdriver In key holder, 8-piece set. Keys: CHROM VANADIUM, hardened, steel rey. -ball-ended 48900 T9, 10, 15, 20, 25, 27, 30, 40 165 30 Specifications subject to chane without prior notice.
-Screwdrivers No. 908 Anled keys Keys: CHROME-VANADIUM, hardened and blued. mm 46540 T06 01.70 44.5«18.5 001.9 46565 T07 01.99 50.5«18.5 002.0 46581 T08 02.31 051«19 002.8 46607 T09 02.50 051«19 003.4 46615 T10 02.74 054«20 003.6 46623 T15 03.27 057.5«21.5 005.2 46631 T20 03.86 061«23 006.5 46649 T25 04.43 064.5«24.5 009.4 46656 T27 04.99 069.5«26.5 015.0 46664 T30 05.52 076«30 020.0 46672 T40 06.65 083«33 031.0 46680 T45 07.82 091«37 044.0 46698 T50 08.83 095«32 062.0 46706 T55 11.22 108«35 126.0 No. 907S keys with small rip Blade: CHROME-VANADIUM, hardened Grip: and blued. impact-resistant plastic (cadmium-free), reen... fast for low tihtenin torques 46730 46748 T 6 T 7 1.70 1.99 35 70 46755 T 8 2.31 38 46763 T 9 2.50 40 75 46771 T10 2.74 14 15 e.. for cuttin tool tips! No. 907L keys with screwdriver handle Blade: CHROME-VANADIUM, hardened and blued. Grip: impact-resistant plastic (cadmium-free), reen. 46359 46367 T08 T09 2.31 2.50 60 140 19 31 31 46425 46375 T10 T15 2.74 3.27 80 170 21 33 35 46383 46391 T20 T25 3.86 4.43 100 190 21 50 55 46409 T27 4.99 115 220 24 79 Specifications subject to chane without prior notice. 31
-Screwdriver-sets No. 907Q keys with T-rip Blade: CHROME-VANADIUM, hardened Grip: and chromium-plated. impact-resistant plastic (cadmium-free), reen. 45906 T09 02.50 100 080 125 035 45914 45922 T10 T15 02.74 03.27 100 080 125 035 036 45930 45948 T20 T25 03.86 04.43 100 100 125 60 45955 45963 T27 T30 04.99 05.52 100 100 131 070 075 45989 T40 06.65 100 100 131 080 46029 T50 08.83 150 120 188 160 No. 907Q-WT7 Workshop stand (TORX) with T-rip TORX keys No. 907Q, 7-piece set. Blade: CHROME-VANADIUM, hardened and chromium-plated. Grips: impact-resistant plastic (cadmium-free), reen. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. 46722 Contents: Torx «blade lenth T10x100, 15x100, 20x100, T25x100, 30x100, 40x100, 50x150 660 Space for two more TORXkeys No. 907S Specifications subject to chane without prior notice. 32
No. 908-TT 9 Key wallet with TORX keys No. 908, 9-piece set. Keys: CHROME-VANADIUM, hardened and blued. Plastic wallet with slot for self-service rack and reusable closure. 43836 T6, 7, 8, 9, 10, 15, 20, 25, 30 65 -Screwdrivers-sets No. 909T SCHRAUB-boy (TORX) Blades: hardened and blued. Grip: hand-friendly, eronomic twocomponent body. 45625 45633 Item 909T-6-25 909T-8-40 T6, 7, 8, 9, 10, 15, 20 u. 25 T8, 10, 15, 20, 25, 27, 30 u. 40 100 200 Specifications subject to chane without prior notice. 33
Bits 34-37 The advant antaes at a lance! Bit box: - Transparent plastic - Bits are visible without openin - A hexaon socket on the side lets you use it as a screwdriver - With removable belt clip Bit holder: - For all normal battery or electric screwdrivers - Quick-chane holder with ejector sprin for easier bit chanin Bits: - Quality bits with practical hardness/ touhness ratio - Hard enouh to prevent excessive wear, and at the same time touh enou to withstand torque peaks without breakin - TiN-coatin of bit tips: wear-resistant surface ensures lon workin life Structured surface: - Reduces required axial enaement force - Reduces daner of the tool slippin out of a screw head No. 929-11 Bits set, Standard Contents: 48546 4, 5, 6, 7 PZ 1, 2, 3 PH 1, 2, 3 Quick-chane holder, manetic 65 mm 145 No. 929TiN-11 Bits set, Standard-TiN TiN-coated bit tips, Structured surface. Contents: 48553 4, 5, 6, 7 PZ 1, 2, 3 PH 1, 2, 3 Quick-chane holder, manetic 65 mm 145 No. 935-11 Bits set, Contents: 48561 T 7, 8, 9, 10, 15, 20, 25, 27, 30, 40 Quick-chane holder, manetic 65 mm 145 No. 935TiN-11 Bits set, TiN-coated bit tips. -TiN Contents: 48579 T 7, 8, 9, 10, 15, 20, 25, 27, 30, 40 Quick-chane holder, manetic 65 mm 145 Specifications subject to chane without prior notice. 34
Bits No. 940S Quick-chane holder, manetic with ejector sprin for easier bit chanin. Drive end: Form E 6.3 (1/4 ) 48355 1/4 65 1/4 35 No. 940 Universal holder, manetic Drive: 1/4 (form E 6.3) 48389 1/4 59 1/4 22 No. 946L Bit holder with screwdriver handle, manetic Bit chuck: 1/4 hexaon, stainless steel Shaft: CHROM VANADIUM, nickel-plated. Grip: impact-resistant plastic (cadmium-free), blue. 48397 1/4 130 24 100 No. 946 Bit holder with T-rip, manetic Bit chuck: 1/4 hexaon, stainless steel. Shaft: CHROME-VANADIUM, Grip: nickel-plated impact-resistant plastic (cadmium-free), blue. 48371 1/4 190 220 100 100 Specifications subject to chane without prior notice. 35
Bits No. 923 Screwdriver bits Wear: DIN 3127 Drive: 1/4 (form C 6.3) 48306 4.5 0.6 5.1 48314 48322 5.5 6.5 0.8 1.2 25 4.9 4.9 48330 8.0 1.6 5.4 No. 928 Phillips PH bits Wear: DIN 3128 Drive: 1/4 (form C 6.3) 48132 1 4.5 48140 2 25 5.1 48157 3 5.4 No. 929 Pozidriv PZ bits Wear: DIN 3128 Drive: 1/4 (form C 6.3) 48165 1 4.5 48173 2 25 5.1 48181 3 5.4 No. 935 TORX-Bits Drive: 1/4 (form C 6.3) 48009 T 6 4.2 48017 48025 T 7 T 8 25 4.3 4.3 48033 T 9 4.3 48041 T 10 4.5 48058 T 15 4.6 48066 T 20 5.4 48074 T 25 25 5.4 48082 T 27 5.4 48090 T 30 5.8 48108 T 40 6.3 No. 931 Hexaon bits Wear: DIN 7426 Drive: 1/4 (form C 6.3) 48454 1.5 4.5 48462 2.0 4.5 48470 2.5 4.7 48488 3.0 25 4.9 48496 4.0 5.3 48504 5.0 5.7 48512 6.0 6.5 48520 48538 8.0 10.0 25 8.6 11.7 Specifications subject to chane without prior notice. 36
Bits No. 923TiN Screwdriver bits TiN-coated bit tips, Structured surface. Workin tip: DIN 3127 Drive end: Form C 6.3 (1/4''). 48603 48611 48629 48637 4.5 5.5 6.5 8.0 0.6 0.8 1.2 1.6 25 5 5 5 6 No. 928TiN Phillips PH bits TiN-coated bit tips, Structured surface. Workin tip: DIN 3128 Drive end: Form C 6.3 (1/4''). 48645 48652 48660 1 2 3 25 5 5 6 No. 929TiN Pozidriv PZ bits, TiN-coated bit tips, Structured surface. Workin tip: DIN 3128 Drive end: Form C 6.3 (1/4''). 48678 48686 48694 1 2 3 25 5 5 6 No. 935TiN TiN TORX bits TiN-coated bit tips, Drive end: Form C 6.3 (1/4'' 48710 48728 48736 48744 48751 48769 48777 48785 48793 48801 48819 T 6 T 7 T 8 T 9 T10 T15 T20 T25 T27 T30 T40 25 4 4 4 4 5 5 5 5 5 6 6 Specifications subject to chane without prior notice. 37
For trade and industry. 38-43 Tools for threaded fasteners for trade and industry. Trouhout the world, is a hallmark for hih-quality screwdrivin tools for tradespeople and industry. Our products prove themselves millions of times every day. From DIN to company standards. Technical perfection is our standard. The results of this quality: a lon workin-life, precise transmission of force and thus the reatest possible safety, and user-friendliness in every detail. From socket wrenches to hook wrenches, from pin wrenches to open-ended spanners, from drill drift to fire hydrant key, we have a broad and balanced proram of screwdrivin tools. Made of alloy steels with appropriate plated finishes for all applications. The followin paes will ive you an overview of this wide spectrum. Made-to-measure, from small to enormous. One of our specialities is the manufacturer of special tools to customers individual requirements. Special tools can also be made from existin ones but modified to meet your requirements. A drawin or sketch and the quantity required are all the information we need to quote. Applications and size ranes of our hook wrenches DIN 1810A Size DIN 1804 DIN 981 DIN 70852 DIN 11851-F Size DIN 1804 DIN 981 DIN 70852 DIN 11851-F M M KM KML M DN M M KM KML M DN 12-14 98-105 75 80 15 16 80 16-20 6 8 10 110-115 72-80 85 17 90 65 25-28 10 12 15 17 2 3 16 120-130 85 90 100 20 100 105 80 30-32 14 16 20 4 18 20 135-145 95 100 110 120 22 24 110 115 34-36 18 120 24 20 22 155-165 105-120 130 26 26 140 28 125-135 38-45 26 25 30 5 6 24-30 10 15 180-195 125-140 140 150 28 30 30 150-160 40-42 22 24 26 28 205-220 150 160 170 190 34 38 175 180 150 45-50 26-30 30 6 32 35 230-245 170 180 180 36 190-200 52-55 32 35 35 7 38 20 260-270 190 200 58-62 38-42 40 8 42 45 25 280-300 65-70 45 50 9 10 48-52 32 300-320 68-75 45-50 55 11 50-55 32 320-345 80-90 52-60 60 12 60-70 350-375 85-92 65 70 13 14 65 70 50 380-400 95-100 62-70 75 80 480-500 38
DIN 1810A Hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, machined nose, edes round, hardened and blued. 54585* 54593* 012 014 016 020 110 3 25 54601* 54619* 025 028 030 032 136 4 45 50 54627* 034 036 090 54387* (38 045) 170 5 095 54635* 040 042 90 54643* 54650* 045 050 052 055 206 6 155 160 54668* 058 062 260 54403* (65 070) 240 7 54676* 068 075 255 54684* 54429* 080 090 (85 092) 280 8 410 54692* 54445* 095 100 (98 105) 280 290 8 405 54700* 54718* 110 115 120 130 335 10 745 720 54726* 54734* 135 145 155 165 385 10* 1000 965 54742* 54759* 180 195 205 220 470 10* 1500 1580 54767* 54775* 230 245 260 270 568 10* 2250 54783* 54841* 280 300 300 320 680 695 15 15 5150 5100 54791* 54809* 320 345 350 375 695 735 15 15 5200 54817* 54825* 380 400 480 500 770 988 15 20 6700 13000 * Thickness not to DIN. Hook wrenches Please note: Intermediate sizes and other material thicknesses for quantities above 100 on request. Available in stainless steel on request (up to 6 mm thick). DIN 1810AD Hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, machined nose, edes round, hardened and heat-treated. 55103* 016 020 110 3 25 55111* 55129* 025 028 030 032 136 4 45 50 55137* 55152* 034 036 040 042 170 5 90 55160* 55178* 045 050 052 055 206 6 155 160 55186* 55202* 058 062 068 075 240 7 260 255 55210* 55236* 080 090 095 100 280 8 410 405 55251* 55269* 110 115 120 130 335 10 745 720 55277* 55285* 135 145 155 165 385 10* 1000 965 * Thickness not to DIN. Specifications subject to chane without prior notice. 39
Hook wrenches Application and size ranes Size DIN 1804 DIN 981 DIN 11851-F M M KM KML DN 20 42 8 24 15 25 2 5 10 45 90 26 60 30 65 6 13 15 50 75 130 15 26 120 24 95 165 62 120 130 26 65 100 140 28 No. 771 Adjustable hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, round, hardened and blued. 51573 20 042 180 04 100 51581 45 090 240 06 250 51599 95 165 335 10 710 No. 771Md Adjustable hook wrench with nose and torque-wrench fittin for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, hardened and blued. Drive: square socket. 51516 20 042 1/2 100 135 4 165 51532 45 090 1/2 150 192 6 310 51557 95 165 3/4 220 298 10 910 Specifications subject to chane without prior notice. 40
Hook wrenches Application and size ranes Size DIN 1804 DIN 981 DIN 11851-F DIN 70852 M M KM KML DN M 20 35 8 18 15 20 2 4 10 20 35 60 20 38 25 40 5 8 10 20 22 42 60 90 40 60 45 65 9 13 25 40 42 70 70 115 14 23 90 155 58 110 120 24 24 50 100 70 125 130 26 120 180 24 36 155 230 105 170 130, 140, 150 26, 28, 30 125 150 125 190 160,170,180,190 32, 34, 36, 38 No. 775C Hined hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, hardened and blued. With hole for hanin up. 51649 51656 51664 51672 51680 020 035 035 060 060 090 090 155 155 230 135/4 175/5 250/7 290/8 420/8 8 11 13 15 18 50 100 280 455 1000 No. 775D Hined hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, hardened and nickel-plated. With hole for hanin up. 51730 51748 51755 51763 51771 20 035 35 060 60 090 90 155 155 230 135/4 175/5 250/7 290/8 420/8 8 11 13 15 18 50 100 280 460 1000 No. 775NI Hined hook wrench with nose for rooved nuts to DIN 1804 and for couplins and fittins to DIN 11851. Stainless steel. With hole for hanin up. 52183 52191 52209 52217 52225 20 035 35 060 60 090 90 155 155 230 DIN 11851 F DN 10 20 25 40 50 100 125 150 135/3 175/4 250/5 290/6 420/8 8 11 13 15 18 35 80 215 350 1000 Our comprehensive proram also includes stainless steel tole clamps. Specifications subject to chane without prior notice. 41
Hook wrenches Applications and size ranes of our hook wrenches 1810B and 776. 1810B Size DIN 1816 M 776 Size 16 18 6 20 22 8 25 28 10 12 30 32 14 16 20-35 34 36 18 20 40 42 22 24 26 45 50 28 35-60 30 52 55 32 35 58 62 38 40 60-90 1810B Size DIN 1816 M 776 Size 58 62 42 45 68 75 48 60-90 50 52 80 90 55 58 60 62 95 100 65 68 70 72 90-155 110 115 75 80 120 130 85 90 1810B DIN 1816 776 Size M Size 135 145 95 100 90-155 105 155 165 110 115 120 125 180 195 130 155-230 140 205 220 150 160 230 245 170 180 260 270 190 200 DIN 1810B Hook wrench with pin for nuts with radial holes to DIN 1816. Special steel, hardened and blued. 54874 012 014 54882 016 018 2,0 2.5 02,0 02.5 110 3 0025 50 54890 020 022 2.5 02.5 110 3 0025 50 54908 025 028 54916 030 032 03 4 03,0 136 4 0055 50 54924 034 036 54932 040 042 04 4 03.5 170 5 0100 50 54940 045 050 54957 052 055 05,0 04,0 206 6 0165 50 54965 058 062 54973 068 075 05,0 6,0 05,0 05,0 240 7 0270 20 54981 080 090 54999 095 100 06,0 08,0 06,0 06,0 280 8 0410 10 55004 110 115 55012 120 130 08,0 08,0 08,0 08,0 335/10 335 8* 0610 10 55020 135 145 55038 155 165 08,0 08,0 380 8* 790 10 55046 180 195 55053 205 220 10,0 08,0 470 10* 1500 1580 55061 230 245 55079 260 270 10,0 10,0 568 10* 2250 * Thickness not to DIN. Available in stainless steel on request (up to 8 mm thick). DIN 1810BD Hook wrench with pin for nuts with radial holes to DIN 1816. Special steel, hardened and heat-treated. 42 55400 016 018 04.0 55418 020 022 2.5 02.5 110 3 0125 55426 025 028 55434 030 032 3 4 03,0 136 4 0155 55442 034 036 05,0 55459 040 042 4 0 05,0 3.5,0 170 5 0100 55467 045 050 55475 052 155 0,0 0 5,0 04,0 06,0 206 6 0165 55483 158 162 55491 168 175 0 5 6,0 05,0 08,0 08,0 240 335/10 7 0270 55509 180 190 0 6, 55517 195 100 8 0 06,0 280 8 410 55525 110 115 0 55533 120 130 8,0 8,0 335 8* 630 55541 135 145 0 55558 155 165 8,0 8,0 380 8* 800 * Thickness not to DIN. Specifications subject to chane without prior notice.
Hook wrenches Hined hook wrench with one-piece hook and pin. increases maximum torque by 50-80% compared with version with replaceable pin. loner workin life. No. 776C Hined hook wrench with pin for nuts with radial holes to DIN 1816. Special steel, edes round, hardened and blued. With hole for hanin up. 51821 02.5 x 51839 020-035 03,0 x 51847 04,0 x 135/4 07.0 0050 50 51854 51862 035-060 04,0 x 05,0 x 175/5 10.0 0100 25 51870 51888 060-090 05,0 x 06,0 x 250/7 13.0 0280 10 51896 51904 090-155 06,0 x 08,0 x 290/8 14.5 0460 10 51912 51920 155-230 08,0 x 10,0 x 420/8 18.5 1000 x If no pin diameter is iven in the order, we supply the pin diameter marked. No. 776D Hined hook wrench with pin for nuts with radial holes to DIN 1816. Special steel, hardened and nickelplated. With hole for hanin up. 51979 51987 20-35 2.5 x 3,0 x 135/4 7.0 50 52001 35-60 4,0 x 175/5 10.0 100 52027 60-90 5,0 x 250/7 13.0 280 52043 90-155 6,0 x 290/8 14.5 460 52068 155-230 8,0 x 420/8 18.5 1000 x If no pin diameter is iven in the order, we supply the pin diameter marked. No. 776Md Hined hook wrench with pin and torque-wrench socket for nuts with radial holes to DIN 1816. Special steel, hardened and blued. Drive: square socket. 52753 52761 52779 35-60 60-90 60-90 5 5 6 1/2 65 75 75 110 130 130 5 7 7 10.5 12.7 12.7 135 230 230 No. 779D Spare pin with nut for use in our hined hook wrench 776 with replaceable pins. Special steel, nickel-plated. ˇD L L1 M 52605 2,5 3 52613 20-35 3,0 3 52621 4,0 4 8 2,0 1 10 52639 52647 35-60 4,0 5,0 4 5 11.5 3.5 2 10 52654 52662 60-90 5,0 6,0 5 6 13.5 4, 2 3 10 52670 52688 90-155 6,0 8,0 6 8 17.5 5,0 4 6 10 52696 52704 155-230 8,0 10,0 8 10 19 6,0 8 11 10 Specifications subject to chane without prior notice. 43
Adjustable pin wrenches 44-46 No. 758-759AZ Adjustable pin wrenches for nuts with 2 holes With replaceable, hardened pins (version AZ), fully assembled. With hole for hanin up. Special steel, blued. Item 40642 3 4 40659 758AZ 11-060 4 5 40667 5 6 160 4 140 40857 5 6 40865 759AZ 14-100 6 7 40873 8 8 215 6 300 * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). No. 764AZ Hined pin wrenches for nuts with 2 holes With replaceable, hardened pins (version AZ), fully assembled. With hole for hanin up. Special steel, blued. Item 40998 41004 764AZ 118-140 03 04 4.,0 5. 150 05 0090 41012 04 5. 41020 764AZ 140-180 05 6. 41137 06 7. 220 06 0245 41145 06 7. 41152 764AZ 180-125 07 7.5 41160 08 8. 295 08 0615 41277 41285 764AZ 125-200 08 10 8. 10. 405 10 1530 * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). No. 764AZ-04 Loose pins with nut for Nos. 758AZ, 759AZ, and 764AZ pin wrenches with replaceable pins. Special steel, hardened and blued. For wrench Item * l D L M 758AZ 759AZ 764AZ 47795 764AZ-04-02 118-140 03 04,0 47803 764AZ-04-03 11-60 118-140 04 05,0 M4 47779 764AZ-04-04 00000 00-000 05 06,0 00 47811 764AZ-04-07 00000 00-000 100-100 04 05,0 00 47829 764AZ-04-08 140-180 05 06,0 M5 47837 764AZ-04-09 00000 00-000 100-100 06 07,0 00 47787 764AZ-04-11 00000 14-100 05 06,0 00 47845 764AZ-04-12 14-100 180-125 06 07,0 00 47852-13 00000 180-125 07 07,5 M6 47860 764AZ-04-14 00000 14-100 180-125 08 08,0 00 47878 764AZ-04-17 00000 00-000 100-100 08 08,0 00 47886-19 125-200 10 10,0 M8 * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). Specifications subject to chane without prior notice. 44
Adjustable pin wrenches No. 756-760 Adjustable pin wrenches for nuts with 2 holes No. 756 with riveted pins, from No. 758 with pins electrically welded. Special steel, blued. Item 40477 01.5 x 02,8 40485 756 07-040 02,0 x 02.5 40493 02.5 x 03,0 115 3 040 40618 03,0 x 04,0 40626 758 11-060 04,0 x 05,0 40634 05,0 x 06,0 160 4 140 40758 05,0 x 06,0 40766 759 14-100 06,0 x 07,0 40774 08,0 x 08,0 215 6 300 40899 08,0 x 08,0 40907 760 22-125 10,0 x 10,0 40915 12,0 x 12,0 260 6 500 * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). x If no pin diameter is iven in the order, we supply the pin diameter marked. No. 758-759CC Adjustable pin wrench for nuts with 2 holes, cranked With electrically welded pins. Special steel, hardened and blued. 50914 50922 50930 50948 Item 758CC 759CC 11-60 14-90, 3,0 4,0 x 5,0 6,0 x 20 27, 153 205, 4 6 120 310, * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). x If no pin diameter is iven in the order, we supply the pin diameter marked. No. 764C Hined pin wrenches for nuts with 2 holes With electrically welded pins. With hole for hanin up. Special steel, blued. Item 41038 41046 764 118-140 03,0 x 04,0 x 04,0 05,0 150 05 0090 41053 04,0 x 05,0 41061 764 140-180 05,0 x 06,0 41079 06,0 x 07,0 220 06 0245 41087 06,0 x 07,0 41095 764 180-125 07,0 x 07.5 41103 08,0 x 08,0 295 08 0615 41111 41129 764125-200 08,0 x 10,0 x 08,0 10,0 405 10 1530 * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). x If no pin diameter is iven in the order, we supply the pin diameter marked. Specifications subject to chane without prior notice. 45
Fixed pin wrenches DIN 3116 Wrench for 2 hole flane-nuts For securin rindin wheels and cuttin discs. Special steel, zinc-plated. With electrically welded pins. Form 50997 A 30 40 5 164 4 85 44685 A 50 (6) 180 120 44669 C 35 (5)0 6 50 200 5 200 44677 C (5.5 6 50 200 200 * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). ( ) Not to DIN Form C Form A DIN 3116A Wrench for 2 hole nuts Special steel, blued. With electrically welded pins. (Zinc-plated on request) 44453 44461 013 015 02.5 03,0 3 4 90 3 00 27 00 44479 44628 020 020 (3) 4 4 5 122 4 50 44636 025 03,0 040 137 0065 44487 025 0(4),0 050 137 4 0065 44495 030 04,0 050 164 0 0185 00 44503 44644 035 **035** 0(4),0 05,0 050 060 180 0 5 0 120 44511 040 04,0 05,0 167 0 0120 00 44529 045 04,0 05,0 187 5 0145 20 44537 050 05,0 06,0 198 0 0175 00 44545 060 05,0 06,0 213 0220 00 44552 075 06,0 07,0 2436 03 3 0 10 44560 090 07,0 07.5 270 0410 00 44578 105 08,0 08,0 305 0 0735 44586 125 08,0 08,0 350 8 1925 44594 145 10,0 10,0 390 0 1100 44602 170 10,0 00,0 420 0 1300 44610 200 10,0 10,0 490 8 1550 Made as specials for 10 pieces or more. For sinles see Item No. 764. ** Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). ** Standard size for commercially available anle-rinders and cutters. Size 13 has riveted pins. Sizes 13 and 15 without cut-out between pins for M8 and M10 nuts to DIN 547. ( ) Not to DIN DIN 3116C Cranked wrench for 2 hole nuts Special steel, blued. With electrically welded pins. Form 44651 C 18 3 4 15 140 4 95 * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). Please note: This wrench is used for adjustin timin belt tensioners (AUDI, VW). Specifications subject to chane without prior notice. 46
Wrenches for machine tools 47-50 No. 250 Collet chuck key for collet chuck nuts (ER) to DIN 6499. Special steel, hardened and zinc-plated. With hole for hanin up. DIN6499D Size Size 52233 52241 16 20 16 20 32 35 163 183 5 180 190 52258 52266 25 32 25 32 42 50 203 253 6 6 255 359 52274 52290 40 50 40 63 78 285 350 6 7 480 810 No. 250 Md Key for collet chuck with torque-wrench fittin for chuck nuts (ER) to DIN 6499. Drive HH square socket with ballenaement roove. Special steel, hardened and zincplated. 52316 52308 52324 52340 Size 16 25 32 40 Other sizes on request. DIN6499D 32 42 50 63 45 60 60 60 69 85 85 85 5 6 6 6 180 200 210 220 Advantae: controlled tihtenin prevents damae to spindle chanin tools on a machine. No. 902 Md Open-ended spanner with torque-wrench fittin for clampin nuts. Drive HH square socket with ballenaement roove. Special steel, hardened and zincplated. 52506 SW 25 40 78 7 180 Advantae: controlled tihtenin prevents damae to spindle chanin tools on a machine. Specifications subject to chane without prior notice. 47
Wrenches for machine tools DIN 317 Drill drift Special steel, hardened and blued. Size For tapers Morse Metric 40147 000 0 4+6 090 12«03 0014 40154 001 1+2 140 20«05 0070 40162 003 3 190 25«07 0150 40170 004 4 225 30«10 0310 40188 005 5 +6 265 35«15 0650 No. 318 Drill drift, semi-automatic for DIN 228 morse tapers Special steel, hardened and blued. Grip: plastic-coated, red. Size 1-3 with finer protection! Size Morse 40220 1 3 1 3 317 310 40238 4 6 4 6 380 570 Advantae: - With finer protection (Size 1-3) - One-hand operation - Pressure on the lever moves a ear rack between two opposin wedes (the other hand holds the tool to prevent it fallin) - Releasin tools usin the semi-automatic drift helps prevent spindle dam Specifications subject to chane without prior notice. 48
Wrenches for machine tools No. 960 Socket wrench for coolant tubes HSK-A (Hollow cone to DIN 69893) Socket: special steel, hardened and blued. Grip: impact-resistant plastic (cadmiumfree), black. Size = HSK-A 47894 32 1,4 6,1/8,5 115 80 50 47902 40 1,9 8,1/10,5 115 80 60 47910 50 1,9 10,1/14,5 115 80 75 47928 63 2,4 12,2/16,5 135 100 125 47936 80 2,4 14,2/18,5 135 100 165 47944 100 2,9 16,2/22,0 135 100 135 On request with advertisin or company imprint, please see pae 4. No. 250K Collet chuck key (Mini) for collet chuck nuts (ER). Special steel, hardened and blued. Size for nuts M 52407 8 12 10 75 13 14 52415 11 16 13 95 17 30 52423 16 22 19 115 23 50 52431 20 28 24 130 29 61 52449 25 35 30 143 35 78 DIN 6368 DIN 6368 Wrench for millin arbor screws For tihtenin millin arbor screws to DIN 6367. Special steel, hardened and blued. 44727 13 M06 13 160 0065 44735 16 M08 16 180 0085 44743 22 M10 22 200 0200 44750 27 M12 27 225 0400 44768 32 M16 32 250 0570 44776 40 M20 40 280 0800 44784 50 M24 50 315 1100 44792 60 M30 60 355 1750 * The size iven here is the diameter of the mandrel on the millin arbor. Specifications subject to chane without prior notice. 49
Wrenches for machine tools No. 6368S Safety wrench for millin arbor screws For safely tihtenin millin arbor screws to DIN 6367. No more slippin off when tihtenin millin arbor screws! Special steel, hardened and blued. Safety knob made of red plastic and free to rotate. 46912 16 M08 16 180 0215 46920 22 M10 22 200 0330 46938 27 M12 27 225 0530 46946 32 M16 32 250 0700 46953 40 M20 40 280 0930 * The size iven here is the diameter of the mandrel on the millin arbor. No. 6368SK Safty knob for retro-fittin with spacer and retainin screw (diameter of hole in wrench 7.1 mm). 46714 80 52 86 Safety at work! The eronomic form of the safety knob on this wrench makes it easy to prevent the tool slippin off when tihtenin or loosenin millin arbor screws. Specifications subject to chane without prior notice. 50
Socket wrenches 51-53 DIN 22417A Trianular socket spanner Special steel, body and tommy bar zinc-plated. 44354 M04 090«10 06.80 050«06 020 44362 M05 100«12 08.30 065«06 030 44370 M06 115«14 10.05 080«06 060 44388 M08 125«16 12.05 100«08 080 44396 M10 140«20 15.05 125«08 160 44404 M12 160«22 16.55 160«10 240 44412 M16 180«25 20.55 200«12 400 * The size refers to the screw diameter These spanners are intended for trianular-head screws to DIN 22424 and nuts to DIN 22425. The M12 size is especially suitable for installin and removin steel and aluminium access-denial posts. DIN 905 Chuck keys, square Special steel, body and tommy bar hardened and blued. 41988 41996 0(4) 05 060«12 000«00 160«06 000«00 0000 0070 42002 06 080«12 160«06 0080 42010 0(7) 42028 08 42036 09 080«16 180«08 0170 42044 42051 10 11 000«00 100«20 000«00 200«10 0320 0000 42069 42077 12 13 100«24 250«12 0450 42085 14 120«28 320«14 0780 42093 42101 17 19 160«34 200«36 000«00 400«16 1500 1850 42119 42127 22 24 200«42 250«45 630«20 3100 4200 ( ) Not DIN size DIN 7417 Square socket key Malleable iron nickel-plated. 56002 56010 06 07 55 52 11 12 18 56028 08 58 14 24 56044 10 64 17 40 Specifications subject to chane without prior notice. 51
Socket wrenches No. 914Q Square socket spanner with T-rip Socket: CHROME-VANADIUM, Grip: hardened and nickel-plated. impact-resistant plastic (cadmium-free). 44107 06,0 12 85 44115 08,0 125 100 151 14 122 44123 10,0 0 12500 100 0 15510 17 150 Other lenths and executions on request. On request with advertisin or company imprint, please see pae 4. DIN 904 Square socket spanner Special steel, body and tommy bar hardened and blued. 41665 41673 0(4) 05 060«12 000«00 160«06 000«00 0000 0085 41681 06 080«12 160«06 0100 41699 41707 0(7) 08 000«00 080«16 180«08 000«00 0180 0000 41715 41723 0(9) 10 100«18 100«20 180«08 200«10 0245 0340 41731 41749 12 13 000«00 100«24 000«00 250«12 0520 0000 41756 14 120«28 320«14 0875 41764 41772 17 19 160«34 200«36 000«00 400«16 1625 2035 41780 41798 22 24* 200«42 250«45 500«18 630«20 2900 4270 DIN 904 L DIN 904 DIN 904L Square socket spanner, lon version. Special steel, body and tommy bar hardened and blued. 41848 41855 0(5) 0(6) 120«12 160«12 160«06 000«00 0100 0110 41863 0(8) 160«16 180«08 0210 41871 0(9) 200«18 200«08 0390 41889 (10) 200«20 200«10 0390 41897 41905 12 13 200«24 250«12 0600 41913 14 200«28 320«14 0795 41921 41939 17 * 19 * 250«34 320«36 000«00 400«16 1500 1700 * Contrary to DIN standard, shaft is not bored. ( ) Not DIN size. DIN 248 Square rin spanner Special steel, hardened and blued. 40022 40030 08 10 160 195 17 21 0185 0165 20 40048 12 235 24 0275 00 40105 13 250 26 0300 10 40055 14 270 27 0420 00 40063 40071 17 19 315 345 31 35 0530 0715 00 10 40089 22 385 39 0900 40097 24 415 43 0975 Specifications subject to chane without prior notice. 52
Socket wrenches No. 916Q Hexaon socket spanners with T-rip Socket: CHROME-VANADIUM, Grip: hardened and nickel-plated. impact-resistant plastic (cadmium-free). 45161 05.5 000 000 08 80 44248 06,0 125 100 155 09 90 44255 07,0 000 000 11 90 44263 08,0 125 155 00 95 44198 08,0 230 100 260 12 120 44313 08,0 350 381 00 150 45179 09,0 125 100 155 13 115 44271 44206 10,0 10,0 125 230 100 155 260 00 14 120 160 45203 11,0 350 381 00 225 44297 13,0 125 100 155 19 140 44222 13,0 230 260 180 44305 14,0 125 100 156 20 140 45237 45245 16,0 17,0 * 125 000 100 155 000 22 24 155 160 On request with advertisin or company imprint, please see pae 4. DIN 659 Tubular box spanners Special steel, hardened and blued. 40253 06 110 05.3 0018 40261 40279 08 09 000 110 06.3 00,0 0020 0040 40287 40295 10 11 000 125 06.3 00,0 0050 0090 40303 13 * 145 08.5 0090 40329 17 * 155 10.5 0130 40337 40345 19 * 22 * 160 170 00,0 12.5 0170 0220 40352 40360 24 * 27 ** 190 00,0 14.5 0270 0315 40378 30 205 16.5 0450 40394 36 * 225 18.5 0670 40402 41 245 18.5 1000 * hardened and zinc-plated ** while stock last DIN 900 A Tommy bar for DIN 659 and DIN 896B Special steel, hardened and blued. l 41533 05 125 0020 41541 06 160 0040 41558 08 180 0070 41566 * 10 200 0125 41574 * 12 250 0220 41582 * 14 320 0390 41590 * 16 400 0630 000 41608 18 500 0990 41616 20 630 1550 * hardened and zinc-plated Specifications subject to chane without prior notice. 53
Open-ended spanners 54-57 DIN 894 Open-ended spanners, sinle-ended Special steel forin, jaws machined, anle of jaws 15, hardened and phosphated. Metric thread size 53579 8 5 94 4 19 13 53595 10 6 105 5 22 20 53611 12 125 5 26 28 53629 13 8 125 5 29 35 53512 16 10 145 6 32 46 53645 17 10* 155 6 36 65 53520 18 12 155 7 39 70 53652 19 12* 170 7 40 83 53660 22 14* 195 8 46 105 53678 24 16 215 9 50 150 53686 27 18 240 10 56 200 53694 30 20 265 11 62 265 53702 32 22* 275 12 67 295 53710 36 24 300 13 74 425 * Size to old DIN standard. No. 714 Open-ended spanners, double-ended, thin version CHROME-VANADIUM, hardened and briht nickel-plated. Jaws machined to DIN 475 Extra thin open-ended spanners 51326 51342 3«03.5 4«04.5 120 1.5 08 51367 51383 5«05.5 6«06.5 120 1.5 08 51391 51409 7«08,0 9«10,0 125 2,0 18 21 Other sizes on request. (for office machinery) No. 714 T-6D Open-ended spanners, double-ended, thin version In plastic wallet, 6-piece set. Contents: 51524 3«3.5, 4«4.5, 5«5.5, 6«6.5, 7«8, 9«10 90 The table shows the across-flat (A/F) sizes for metric, Whitworth, and BSP threads A/F 3 3.2 3.5 4 4.5 5 5.5 6 6.5 7 8 9 10 Metric thread size mm 1.2 1.6 1.8 2 2.3 2.5 3 3.5 4 5 6 (ISO 272) 1.4 Woodscrews mm 4 5 6 (DIN 571) Sheetscrews 2.2 2.9 3.5 3.5 4.2 4.8 6.3 (ISO 1479, DIN 6928) 3.9 3.9 5.5 Specifications subject to chane without prior notice. 54
Customer specials Not available from stock The manufacture of special handtools to customers' individual requirements is an speciality. Such handtools can be either specially desined and produced, or cost-effectively modified from an item in the comprehensive AMF product rane to meet your needs. To start with, drawins or sketches and the required quantities are all we need. Specials, just as you need them, in widely differin forms and versions. Top quality for a lon workin life. From specialists for specialists! Please formulate your enquiry as accurately as possible. We assure you that we will reply by return. The details we need are iven in the list below. 1) DIN desination or drawin 2) Quantity. 3) Across-flats size and anle of jaws (A). 4) Material: special steel, CrV steel, or stainless steel. 5) Execution of edes: punch-rounded, broken by buffin, ede round etc. 6) Thickness of spanner (B). 7) Strenth requirements: hardened or unhardened. 8) Surface finish: blued, nickel-plated or zinc-plated. 9) Markin (C): company name, size, description. 10) For hook wrenches: hook form, pin diameter. 11) For pin spanners: pin spacin and diameter. 12) Delivery date. 55
Customer specials Not available from stock No. 902 Open-ended spanner sinle-ended stamped from steel sheet. Material, thickness, strenth properties and other details to your specification. * Minimum order qty. 3/3.2/3.5/4 65 11 1 2 4.5/5 75 15 1 2 5.5/6 75 15 1 3 7/8 92 18 2 4 9/10 100 21 2 4 11/12 115 24 2.5 5 13/14 135 30 3 6 15/16/17 145 35 3 6 250 18/19/20 175 42 3 6 21/22/23 195 48 4 8 24/25/26 215 54 4 8 27/28 235 58 4 8 30/32/34 260 66 4 10 100 36/41 310 84 5 10 50 46/50 55 385 375 102 120 5 10 5 10 25 25 60 385 120 65 385 120 70 390 140 5 10 25 75 410 150 80 420 158 85 445 172 5 10 10 90 450 180 95 465 190 100 470 200 5 10 10 105 500 200 110 500 210 115 510 225 6 12 5 120 530 235 130 560 252 135 585 265 6 12 5 145 595 280 150 620 280 155 620 300 7 15 5 165 680 330 175 690 340 180 690 355 7 15 5 185 700 360 190 730 360 200 740 380 7 15 5 * Optimum thickness rane. No. 685 Open-ended spanner, short form * Minimum order qty. 8/9 85 22 2 4 10/11/12 93 26 2 4 13/14/15 98 30 2.5 5 16/17 100 37 2.5 5 250 18/19 100 40 2.5 5 20/21/22/23/24 120 47 3 6 25/26/27/28 130/180 55 3 6 100 30/32 36 140 160 66 74 4 8 4 8 50 41 170 84 5 10 46 185 96 5 10 50 185 96 5 10 55 195 106 5 10 60 208 120 5 10 25 65 218 125 70 245 135 75 255 142 80 275 150 85 275 170 6 12 90 280 180 95 305 185 100 310 200 105 310 205 10 110 330 216 115 355 235 120 360 235 7 15 130 370 250 135 385 250 145 420 280 150 500 315 10 20 * Optimum thickness rane. 56
No. 658 Open-ended spanner sinle-ended stamped from steel sheet. Material, thickness, strenth properties and other details to your specification. Customer specials Not available from stock * Minimum order qty. 3.2 4 60 9 10 1 2 4 5 72 9.5 10.5 1 2 5 5.5 84 12 13 1 2.5 250 5.5 8 100 15.5 18 1.5 3 8 9 110 18 20 2 4 8 11 125 22 24 2.5 5 250 11 14 144 25.5 29 250 13 17 162 30 35 3 6 250 17 19 175 35 40 100 19 22 220 42 46 4 8 22 24 225 46 50 4 8 24 27 250 53 60 5 10 100 27 32 285 63 66 32 36 305 66 74 5 10 100 * Optimum thickness rane. No. 710 Open-ended spanner double-ended (German Post standard) Minimum order qty. 3.2 4 10 11 1.5 4 5 90 11 11 2 5 5.5 13 13 2.5 250 5.5 8 90 14 14 3 8 9 125 18 18 4 8 11 250 9 9 20 20 10 10 125 22 22 10.5 11 24 24 5 250 11 14 26 26 250 13 17 125 30 30 5 250 17 19 35 35 100 DIN 3115 Spanner for nuts with slotted face, version B Nuts size a b f h L f M 5 1.8 9.8 5.5 6 50 2 M 6 2.3 10.8 6.5 7.5 65 2.5 M 8 2.8 13.8 9 9 80 3 M 10 3.3 17.8 11 11 90 M 12 3.8 21.8 13 12 100 M 14 3.8 23.8 15 12 100 4 M 16 3.8 26.8 17 14 125 M 18 3.8 29.8 19 14 140 M 20 4.8 31.8 21 15 160 5 57