Industrial-Thermometer

Industrial-Thermometer

Index According to Types

Industrial Thermometers Details of Design Casings Aluminum, V-shaped, completely polished, gold-colored anodized (or silvercolored upon request). Numerals of reading scale printed on the right side. Printing black-colored for easy readability. Adjustable to any desired viewing position and locked by brass nut, spanner size 22 mm. Angle thermometers (90 degrees) have a grooved adapter piece with set screw. Advantage: When mounting the thermometer, it is not necessary to turn the casing. Glass Inserts (Capillaries) Capillary tube of solid glass, bar-shaped, prismatic (optic enlargement of the column), diameter approx. 6mm, oval opening, with yellow background for mercury and white background for blue fluid column. Calibration is deeply burnt, in black, thus being absolutely resistant. The main graduations, which correspond with the printing on the casing, are especially clearly outlined. Capillary Fluid For standard executions from -60 to +200 C, blue fluid and red fluid, respectively, for -60 C (code "Fu"). For temperatures of more than +200 C, only mercury columns (code "Hg") are possible. Upon request, thermometers can be delivered with mercury filling from -30 C onwards. Immersion Tubes (Pockets) As a standard, manufactured of brass (code "Ms") for temperatures up to 300 C, for temperatures of more than 300 C made of steel (Code "St"). Seawater resistant alloys are available upon request (special alloy SoMs 59, SoMs 76 or "CuNiSOFe"). For corrosive alkalis or acids, material 1.4571 (stainless steel) or other resistant kinds of steel are available. With immersion tube type "B", diameter is 10 mm, thickness 1 mm. Accuracy About 1 % of maximum scale value, for thermometers with mercury column. The accuracy of thermometers with an alcoholic fluid meets DIN 16 195 requirements and, consequently, corresponds with the requirements for local reading thermometers.

SIKA Thermometers Casing 200 x 36 mm gold- colored anodized DIN 16189 A, B, B1 DIN 16190 S, S1 DIN 16191 B, B1 Immersion tubes of all right-angled thermometers are manufactured with a grooved adapter piece on top, which is installed in the casing and kept in its place by a set screw. Advantage: Immersion tube can be installed independently of thermometer casing. No turning of thermometer casing is necessary on installation. 1 ) Bdr: Special execution of angle-type thermometer: After installation, casing can be turned by 360 in any direction. See page 9 for description and illustration.

SIKA Thermometers Casing 150x36mm gold- colored anodized DIN 16185B DIN 16186S Immersion tubes of all right-angled thermometers are manufactured with a grooved adapter piece on top, which is installed in the casing and kept in its place by a set screw. Advantage: Immersion tube can be installed independently of thermometer casing. No turning of thermometer casing is necessary on installation. 1 ) Bdr: Special execution of angle-type thermometer: After installation, casing can be turned by 360 in any direction. See page 9 for description and illustration.

SIKA Thermometers Casing 110x30mm gold-colored anodized DIN 16181 B, B1 DIN 16182 S, S1 Immersion tubes of all right-angled thermometers are manufactured with a grooved adapter piece on top, which is installed in the casing and kept in its place by a set screw. Advantage: Immersion tube can be installed independently of thermometer casing. No turning of thermometer casing is necessary on installation. 1 ) Bdr: Special execution of angle-type thermometer: After installation, casing can be turned by 360 in any direction. See page 9 for description and illustration.

Protecting Tubes DIN 16179 BD/BE/BS for SIKA Thermometers with Immersion Tube Type "B", to be screwed in Dimensions Thread d 1 Code No. d 2 h14 M20x1,5 7 25 G1/2 2 26 G3/4 3 M27x2 9 d 3 d 4 d 5 h11 d 6 d 7 d 8 b 1 h 3 h 4 h 5 h 6 i 1 ±0,2 r 1 r 2 r 3 t1 min. 27 17 30 25 11 13 16 22 12 25 39 14 1,6 2,5 8,5 20 27 32 32 22 36 26 11 13 20 26 15 29 45 16 2,5 4 8,5 24 32 Span Size See page 15 for Works Certificates.

SIKA Thermometers Revolving angle type This original SIKA thermometer design permits the casing including insert to be turned by 360 degrees, after installation, so it can be read from any direction. This special SIKA thermometer type will be applied when installation conditions do not permit using a normal angle-type thermometer which is read from the front.

SIKA Thermometers with separate Protecting Tubes SIKA thermometer with immersion tube type "B", threaded socket with integral hexagonal nut, with separate protecting tube type "Gi" made of solid material (1 piece), to be screwed in. SIKA thermometer with immersion tube type "B", with separate protecting tube type "BS" for high pressures, to be welded in. SIKA thermometer with immersion tube type "B", threaded socket with integral hexagonal nut, with separate protecting tube type "Ei", brazed for brass, or welded for steel, to be screwed in.

SIKA Thermometers Immersion Tube Type "Da", Union nut G 1 / 2 -G 3 / 4 -M20x1,5-M27x2 Casing 200x36mm gold-colored anodized DIN 16189 C,C1 DIN 16190C,C1 DIN 16191 C,C1 Immersion tubes of all right-angled thermometers are manufactured with a grooved adapter piece on top, which is installed in the casing and kept in its place by a set screw. Advantage: Immersion tube can be installed independently of thermometer casing. No turning of thermometer casing is necessary on installation. 1) Immersion tube lengths match protecting tubes acc. to DIN 16179; see page 12 for this.

Protecting Tubes DIN 16179CD/CE/CS for SIKA Thermometers with Immersion Tube Type "Da" (connection by union nut) Dimensions Thread d 1 Code d 2 No. h14 M20x1,5 7 25 G 1/2 2 26 G3/4 3 M27x2 9 d 4 d 7 d 8 d 9 h11 h 2 h 5 h 6 i 1 ±0,2 r 1 r 3 Span Size 17 11 13 24 12 25 39 14 1,6 8,5 27 32 22 11 13 30 14 29 45 16 2,5 8,5 32 See page 15 for Works Certificates. 1 ) Hex. nut 2.0401 - CuZn39Pb3 or 2.0402 - CuZn40Pb2 tube SoMs76 or Ms 63 brazed.

SIKA Thermometers Immersion Tube Type "Dc", Union nut M 24x1, 5 Casing 200x36 mm gold-colored anodized DIN 16189 F On principle, thermometers of type "Dc" are supplied with a steel tube of dia. 6. 5 mm for the lower part of the capillary, and which fits into protecting tubes with 7 mm bore, in order to protect the capillary and to prevent glass particles to penetrate into the bore of the protecting tube if glass breakage occurs. Immersion tubes of all right-angled thermometers are manufactured with a grooved adapter piece on top, which is installed in the casing and kept in its place by a set screw. Advantage: Immersion tube can be installed independently of thermometer casing. No turning of thermometer casing is necessary on installation.

Protecting Tubes (Weld-in Type) DIN 43763 Form D for SIKA Thermometers with Immersion Tube Types "Do" Form Prot. tube length 3 l4 Free* imm. length l1 d1 d2 d3 n h 7 D1 40 50 65 24 12, 5 7 3, 5 D2 200 50 125 24 12, 5 7 3, 5 D4 200 110 65 24 12, 5 7 3, 5 D5 260 1 10 125 24 12. 5 7 3. 5 Design: Fig. 1: with screw plug M 18x1. 5, brass, Code No. 000061 Fig. 2: with extension tube 165 mm, made of steel, Type "HD" Code No. 165020V Fig. 3: with double thread nipple, made of steel Type "HDo" Code No. 00076V 1 ) Sealing ring C 18x22 will be supplied See page 13 for SIKA thermometers "Dc". suitable for these protecting tubes. Attention! New! The protecting tubes D 1 - D 4 are supplied upon request with a bore d3 = 3, 5 mm, d1 = 18 mm h7, d2 = 9 mm and female thread M14x1, 5. The immersion lengths (I 3 ) of the thermometers are as follows: Form D 1 D2/4 D5 with extension tube 295 mm 355 mm 415 mm with double threaded nipple 155 mm 215mm 275 mm See page 15 for Works Certificates.

Table of Materials The manufacture of SIKA protecting tubes is regularly controlled by the TÜV Hessen" (technical inspection service) and meets the requirements of AD/HP O. Please inquire if you need protecting tubes made of other materials, with flange connection or PTFE coating. Upon request, each protecting tube can be put to a pressure test or test for surface cracks, at extra charge; a Certificate DIN 50049-3.1.B/EN 10204 will be supplied. 1 ) Only with Works Certificate DIN 50049/2.1 or 2.2 is possible. 2 ) Hexagon Ms 58/tube SoMs 76 or MS63 brazed. Select the most suitable material for your application, Please see FNE and VDE because some materials may be precluded from certain application. SIKA protecting tubes can be supplied with following Certificates, at extra charge: DIN 50049-2.1* ) DIN 50049-2.2* ) DIN 50049-2.3* ) DIN 50049-3.1.A* ) DIN 50049-3.1.B* ) DIN 50049-3.1.C* ) * ) EN 10204

Installation Instructions According to specifications of the Institute of German Engineers. Weld-in protecting tubes (DIN 43 763, DIN 16179) to be welded so that cylindrical part does not enter into medium to be measured or into cross section of conduit. Installation Examples Type "B" Type "Ga" Type "HDo" Explanations This catalogue offers different types of protecting tubes which protect SIKA thermometers against hazards of mechanical, thermal or chemical nature. The protecting tubes permit removal or installation of thermometers during operation. Special attention is drawn to the fact that all SIKA thermometers with immersions tubes B (threaded socket with integral hexagonal nut are adjusted at complete immersion length. These immersion tubes must be totally immersed in the medium to be measured. Should this not be possible, and less than full immersion depth has to used, these special conditions have to be specified to avoid inaccurate reading. For best results, thermometers with at least 63 mm immersion tubes are recommended. On pipe conduits of less than 100 mm dia., the whole width of conduit should be used. On bigger sizes, reaching the center of the conduit is sufficient.

SIKA Thermometers Special Types Type 291 BM Maximum Thermometer for Transformers (with resetting magnet) Order Code: 291 9 21 12 150 41 Casing Immersion Tube/Thread Capillary Range 150x36 mm with grommet 150x10mm brass G 1" white-backed mercury filling, long steel mark +20 +120 C Type 277 200x36 mm with suspension ring on top Tank Scooping Thermometers with short, perforated reservoir Order Code: 277 0 12 11 000 00 white-backed blue liquid 0 +120 C Order Code: Type 278 Ambient Measuring - 30+ 50 c = 273 o 35 11 ooo oo Thermometers o+100 c = 278 01011 ooooo 200x36 mm with suspension ring on top no lower part white-backed blue liquid -30 + 50 C 0 +100 C Special Executions of SIKA Thermometers (at extra charge) Blue shining mercury filling. Can only be supplied for temperatures up to+400 C Immersion tubes brass or steel nickel plated Casing silver-coloured Thermometer without any parts of brass, bronze or similar materials Thermometer with two limit indicators which can be adjusted to any interval Thermometer with grommet which prevents moisture from entering into the immersion tube (outdoor installation) SIKA industrial thermometers complete stainless steel Thermometer with Limit Indicators Grommet

Thermometer Inserts (Replacement inserts)

Spare Parts Thermometer Casings