GRASS StUDIo DWD-xP exclusively by Häfele. www.hafele.co.nz
GRASS CAtAloGUe / 2016 GRASS StUDIo DWD-xP StUDIo Drawer Systems - Versatile and Comprehensive. the GRASS StUDIo DWD-xP Drawer System is a product that exceeds all functional expectations, while also offering individual style. GRASS StUDIo DWD-xP allows for various colour options, different materials, design features and shapes, as well as high quality add-ons and organisational inserts. All accessories are harmoniously co-ordinated to fi t together seamlessly, or offer contrast. GRASS StUDIo DWD-xP Drawer System - Functionality and style. 2
3
GRASS CATALOGUE / 2016 Content PAGE PAGE 7 19 STUDIO Complete drawer sets including runners STUDIO Drawer sides STUDIO Back brackets STUDIO Internal drawer fronts STUDIO Gallery rails STUDIO Duowing, double wall profile STUDIO Front fixing brackets STUDIO Cross rail dividers STUDIO Dynamic drawer runners 40, 60 kg STUDIO Tipmatic drawer runners 40 kg STUDIO Steel back panels STUDIO Plastic spacers for runners STUDIO Installation aids and drilling jigs STUDIO Technical detail One2Five waste bin system One2Five waste bin components One2Top functional lid system One2Four waste bin system Ninka under oven drawer Hailo kitty storage container Ninka connect organising system Grass magic sorto Ninka Cuisio drawer inserts Block, beech drawer inserts Ago-Vario cutlery trays Exzellent cutlery inserts Exzellent spice and utensil inserts Ninka Banio undersink organisation system TIOMOS 110 Hinges TIOMOS 160 Hinges TIOMOS 45 Hinges TIOMOS 90 Blind corner hinges TIOMOS Corner door hinges TIOMOS Angle restrictors TIOMOS Cover caps TIOMOS Mounting plates TIOMOS Technical detail TIOMOS Installation aids and drilling jigs GRASS Hinge machines FREE Flap FREE Up FREE Swing FREE Fold Maxi flap fittings FREE Flap H1.5 Duo flap fittings Duo forte flap fittings 4
33 GRASS tiomos HInGeS Hinges, Cover Caps, Mounting plates, technical detail, Installation aids and Hinge machines. 20 7 StUDIo DWD xp Sets, Sides, Brackets, Runners, Fronts, Rails, Dividers and accessories. WASte BIn SYSteM one2five page 18 49 FRee FlAP FIttInGS FRee Flap, FRee Fold, FRee Up and FRee Swing. 24 DRAWeR InSeRtS 5
GRASS CAtAloGUe / 2016 GRASS StUDIo DWD-xP: the BeneFItS. the GRASS StUDIo DWD-xP drawer range offers maximum comfort and individual design options. > elegant add-on systems > Variable organizing systems > High stability and minimal defl ection > High load capacities 40 or 60 kg > effi cient production thanks to same width for bottom and back panels > Dampened closing with DYnAMIC soft-close runners > tipmatic PlUS mechanical push-to-open push-to-open for handle-free drawers > Drawer side heights are available in 95 and 127 mm > Height (mm): 95 > Finish: Alu 6
-metallic GRASS StUDIo DWD-xP DRAWeRS 7
GRASS CATALOGUE / 2016 GRASS studio dwd-xp drawer sets with dynamic soft-close > Drawer side finish: Alu-metallic or white > Weight capacity (kg): 40 or 60 > Runner function: Pull-to-open, with soft-close > Drawer side finish: Alu-metallic and white > Weight capacity (kg): 40 or 60 > Runner function: Pull-to-open, with soft-close Supplied with: > 1 pair 95 mm Drawer sides > 1 pair Back brackets 95 mm high > 1 pair Drawer front fixing, expanding dowel > 1 pair Full extension DYNAMIC drawer runners with soft-close Supplied with: > 1 pair 127 mm Drawer sides > 1 pair Back brackets 127 mm high > 1 pair Drawer front fixing, expanding dowel > 1 pair Full extension DYNAMIC drawer runners with soft-close 40 kg Full extension runner 40 kg Full extension runner Drawer depth (mm) Alu-metallic White Drawer depth (mm) Alu-metallic White 350 559.75.902 559.75.762 400 559.75.903 559.75.763 450 559.75.904 559.75.764 500 559.75.905 559.75.765 550 559.75.906 559.75.766 Packing: 1 set 500 559.77.905 559.77.705 Packing: 1 set 60 kg Full extension runner 60 kg Full extension runner Drawer depth (mm) Alu-metallic White Drawer depth (mm) Alu-metallic White 500 559.75.915 559.75.775 550 559.75.916 559.75.776 Packing: 1 set 500 559.77.915 559.77.715 Packing: 1 set 8
grass studio dwd-xp drawer sets with dynamic soft-close > Drawer side finish: Alu-metallic or white > Weight capacity (kg): 40 or 60 > Runner function: Pull-to-open, with soft-close > Drawer side finish: Alu-metallic and white > Weight capacity (kg): 40 or 60 > Runner function: Pull-to-open, with soft-close Supplied with: > 1 pair 95 mm Drawer sides > 1 pair Back brackets 182 mm high > 1 pair Drawer front fixing, expanding dowel > 1 pair Full extension DYNAMIC drawer runners with soft-close > 1 pair Round gallery rails for screw-fixing Supplied with: > 1 pair 127 mm Drawer sides > 1 pair Back brackets 214 mm high > 1 pair Drawer front fixing, expanding dowel > 1 pair Full extension DYNAMIC drawer runners with soft-close > 1 pair Round gallery rails screw-on fixing 40 kg Full extension runner 40 kg Full extension runner Drawer depth (mm) Alu-metallic White 350 559.76.902 559.76.762 400 559.76.903 559.76.763 450 559.76.904 559.76.764 500 559.76.905 559.76.765 550 559.76.906 559.76.766 Drawer depth (mm) Alu-metallic White 500 559.77.965 559.77.765 Packing: 1 set Packing: 1 set 60 kg Full extension runner 60 kg Full extension runner Drawer depth (mm) Alu-metallic White Drawer depth (mm) Alu-metallic White 500 559.76.915 559.76.775 550 559.76.916 559.76.776 Packing: 1 set 500 559.77.975 559.77.775 Packing: 1 set 9
GRASS CATALOGUE / 2016 grass studio dwd-xp drawer SIDES > Height (mm): 95 > Finish: Alu-metallic > Height (mm): 95 > Finish: White Alu-metallic drawer sides White drawer sides Drawer length (mm) Drawer length (mm) 350 559.92.936 400 559.92.941 450 559.92.946 500 559.92.951 550 559.92.956 Packing: 20 set 350 559.92.636 400 559.92.641 450 559.92.646 500 559.92.651 550 559.92.656 Packing: 20 set > Height (mm): 127 > Finish: Alu-metallic > Height (mm): 127 > Finish: White Alu-metallic drawer sides White drawer sides Drawer length (mm) Drawer length (mm) 500 559.96.214 Packing: 20 set 500 559.96.714 Packing: 20 set Note > Can be used with either DYNAMIC soft-close or TIPMATIC PLUS push to open runners. 10
grass studio dwd-xp back brackets internal drawer fronts > Material: Steel Drawer back brackets Height (mm) Alu-metallic White 95 559.86.910 559.86.610 127 559.86.216 559.86.616 Packing: 1 set > Version: For 16 mm cabinet construction > Mounting: For drawers behind hinged door application For standard height drawers > Material: Steel Drawer back brackets Description Cabinet width (mm) White Alu-metallic A Front fixing clips 559.91.701 559.91.501 B Front profile 559.91.712 559.91.912 Packing: 1 set Height (mm) Alu-metallic White 182 559.86.511 559.86.611 214 559.86.217 559.86.617 Packing: 1 set > Version: For 16 mm cabinet construction > Mounting: For drawers behind hinged door application > Material: Steel Drawer back brackets Version Alu-metallic White Low 559.86.913 559.86.613 High 559.86.512 559.86.612 Packing: 1 set For pot and pan drawers Description Packing: 1 set White Alu-metallic A Front fixing clips 559.91.720 559.86.613 B Front profile 559.91.712 559.91.912 C Front rail 559.89.712 559.89.813 Note > 95 and 182 mm back brackets for 95 mm drawer profiles 127 and 214 mm back brackets for 127 mm drawer profiles. 11
GRASS CATALOGUE / 2016 grass studio dwd-xp GALLERY RAILS cross rail dividers > Area of application: to be used with high backs or high drawer back brackets Round, screw-on To suit drawer depth (mm) Alu-metallic White 350 559.88.335 559.88.701 400 559.88.340 559.88.702 450 559.88.345 559.88.703 500 559.88.350 559.88.704 550 559.88.355 559.88.705 Packing: 1 set > Area of application: Suits STUDIO DWD-XP gallery rails > Material: Aluminium and plastic > Mounting: tool-free Pot drawer divider railing Description Finish A Dividing rail tube, 1200 mm Alu-metallic 559.89.813 B Divider, single rail Plastic-grey 559.90.501 Packing: 1 set > Area of application: to be used with 182 mm internal drawer fronts A B Round, for internal drawer To suit drawer depth (mm) Alu-metallic White 500 559.91.974 559.91.794 Packing: 1 set DUOWING FRONT FIXING BRACKETS > Area of application: For use with round gallery rails > Mounting: tool-free mounting to STUDIO railing > Finish: Zinc alloy bright Double wall Duowing To suit drawer depth (mm) Alu-metallic White 500 559.90.864 559.90.364 Packing: 1 set Front fixing brackets Version With expanding dowels 559.86.0 Screw on 559.38.990 12
grass studio dwd-xp drawer RUNNERS BACK PANELS > Material: Steel > Finish: Galvanised > Runner function: Full extension, with soft close > Version: For 95 mm drawer profiles with 16 mm cabinet construction > Material: Steel DYNAMIC Runners 40 kg soft close Steel drawer backs 95 mm high Runner length (mm) 350 559.42.637 400 559.42.642 450 559.42.647 500 559.42.652 550 559.42.657 Packing: 1 set Cabinet width (mm) Alu-metallic 450 558.86.245 600 558.86.260 700 556.86.270 800 558.86.280 900 558.86.290 DYNAMIC Runners 60 kg soft close Runner length (mm) > Version: For 95 mm drawer profiles with 16 mm cabinet construction > Material: Steel 500 559.01.851 550 559.01.856 Steel drawer backs 182 mm high Packing: 1 set > Material: Steel > Finish: Galvanised > Runner function: Full extension, with push to open Cabinet width (mm) Alu-metallic 400 558.86.241 450 558.86.246 600 558.86.261 700 556.86.271 800 558.86.281 900 558.86.291 TIPMATIC PLUS Runners 40 kg with push to open SPACERS A Runner length (mm) A B 450 433.11.945 500 433.11.950 Packing: 1 pair 25 mm Internal drawer spacer set Description B Synchronisation lever 433.11.000 C Synchronisation bar, 1079 mm 433.11.001 Version Material A Plastic 559.86.070 B Plastic 558.00.000 13
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP MOUNTING AND INSTALLATION AIDS > Area of application: For STUDIO front fixing, railings and add-on systems Drilling jig for STUDIO front fixings 559.86.530 > Area of application: For STUDIO front fixing. Self locates onto drawer base and side Drilling jig for STUDIO front fixings Packing: 1 set 559.86.520 > Area of application: For STUDIO railing sets.. Self locates over pre-mounted front brackets Drilling jig for STUDIO gallery railings 559.86.550 > Area of application: For STUDIO drawer runners, 40, 60 and 80 kg capacity Drilling jig for STUDIO drawer runners 559.86.541 14
GRASS STUDIO DWD-XP INFORMATION - installation details Dimensions for drawer insert H95 Dimensions for drawer insert H127 29.5 Inside cabinet width mm 29.5 Inside cabinet width 59 2.5 85.5 40 2.5 BU Inside cabinet width 82 16 118.5 Inside cabinet width 82 41 Inside cabinet width mm Cabinet width mm BU 40 16 41 Inside cabinet width mm Cabinet width mm Measurements for Drawer Inserts Inside cabinet width -59 Bottom edge 85.5 40 2.5 16 Inside cabinet width -82 41 Inside cabinet width Cabinet width 15
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP INFORMATION - INSTALLATION DETAILS Gallery Rails Screw-On Internal Inside cabinet width = LW Drawer back width = LW - 74 Inside cabinet width = LW Drawer back width = LW - 74 With round railings, tilt angle adjustment of the front is by turning the gallery rail in place. min. 145 min. 55 40 16 164 Ø 3,5 x 15 Wood screw 31 96 min. 145 min. 55 40 16 164 Ø 3,5 x 15 Wood screw 31 96 Bottom width = LW - 74 21.5 Bottom overlay Bottom width = LW - 74 21.5 Bottom overlay Side overlay Side overlay Interior Front Panels Rail Width = LW -80 Inset front profile Width = LW -90 Inset front profile Width = LW -90 LW = Internal cabinet width 16
GRASS STUDIO DWD-XP INFORMATION - INSTALLATION DETAILS Drawer Front Mounting, Dismounting and Adjustment Drawer front mounting Side adjustment Height adjustment Insert front brackets into drawer. Drawer front snaps shut automatically and is fixed. Turn screw (A). Due to integrated side adjustment only right side has to be adjusted. Loosen fixing screw, adjust drawer front from concentric cam screw and tighten screw again. Drawer insertion Place onto extended slides. Raise gently at the front and close, when fully closed - automatically lock in. Drawer removal Open drawer, slightly raise approx. 10 cm before end stop. Drawer front demounting Lift when extended and pull out horizontally. Usage instructions Drawer can be removed. Spreading dowel ø 10 x 12 mm Screw-on Drawer front can be removed. Loosen bottom/front connector if used. 17
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP INFORMATION - INSTALLATION DETAILS With DYNAMIC integrated soft-close With TIPMATIC PLUS push to open Inside cabinet width = LW Drawer back width = LW - 74 Inside cabinet width = LW Drawer back width = LW - 74 min. 49 min. 55 40 16 68 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels 31 min. 49 min. 55 40 16 68 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels 31 Bottom width = LW - 74 21.5 Bottom overlay Bottom width = LW - 74 21.5 Bottom overlay Side overlay Side overlay Drilling Dimension Front edge of cabinet 2 mm set back Full extension 40kg 350 275 400 350 450 400 500 450 550 500 128 37 224 550 128 37 224 Front edge of cabinet 2 mm set back 352 224 Full extension 60kg Front edge of cabinet 2 mm set back 18 9 14 9 28 37 400 500 450 550 37 500 224 37 Note 352 > Installation depth for standard drawers = Nominal length > Installation depth for internal drawers = Nominal length +9mm 550 600 650 10 9 Drilling Dimension Front edge of cabinet Cutting Dimensions 2 mm set back 128 37 224 Min. installation depth = NL +24 500 275 450 550 350 500 400 550 450 500 550 For standard drawers with timber backs Drawer back Drawer back width LW -74 Drawer bottom Front edge of cabinet 2 mm set back Front edge of cabinet 2 mm set back 128 37 224 Min. installation depth = NL +24 128 37 224 Min. installation depth = NL +24 68 Drawer back height Bottom length NL -9 Bottom width LW -74 Minimum installation depth = NL +9 mm NL = Nominal length of runner Steel drawer back For standard drawers with steel backs Front edge of cabinet 11 mm set back 275 350 275 400 350 450 400 Connecting Rod = LW - 97 Drawer back Drawer back width LW -74 Drawer bottom 164 Drawer back height Bottom length NL -9 Bottom width LW -74 Minimum installation depth = NL NL = Nominal length of runner Drawer back Bottom length NL -19 Set back for full extension runners Drawer back width LW -74 Minimum installation depth = NL +9 mm NL = Nominal 37 length of runner LW = Internal cabinet width 18
DRAWER inserts, waste bins, mats and accessories
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP One2Five WASTE SYSTEM > Area of application: For hanging waste bin pails in GRASS STUDIO DWD-XP and Blum Tandembox/Intivo drawers with a nominal length of 500 mm and for 16 mm cabinet construction. > Material: lids, base plates and pails: 100% recyclable food grade polypropylene, Frame: Steel > Finish: Aluminium coloured > Features: Pre-fitted frame elements, rigid frame construction, three dimensionally adjustable front support brackets, tight integration of the hanging frame in the drawer, same height level of drawer, hanging frame and bins, waste bags strongly fixed by means of carrying handles Supplied with: > Flexible hanging frame > Waste bins or combinations of including 8, 17, 26, litres Cabinet width 15.5 300 width 500 depth 400 width 500 depth 450 width 500 depth 500 width 500 depth 600 width 500 depth Min. 15 38.6 8 litres 8 litres 2 x 8 litres or 1 x 17/26/ litres 2 x 8 litres or 1 x 17/26/ litres 8 litres 8 litres 16 * 7 63.6 5 16 8 litres 17/26/ litres 2 x 8 litres or 1 x 17/26/ litres 2 x 8 litres or 1 x 17/26/ litres 17/26/ litres 17/26/ litres Cabinet width (mm) Total capacity (L) Bin combinations (L) 300 16 2 x 8 502.91.970 25 1 x 8, 1 x 17 502.91.971 400 34 1 x 8, 1 x 26 502.91.972 40 1 x 8, 1 x 502.91.973 4 x 8 502.91.974 33 2 x 8, 1 x 17 502.91.975 34 2 x 17 502.91.976 450 42 2 x 8, 1 x 26 502.91.977 48 2 x 8, 1 x 502.91.978 52 2 x 26 502.91.979 64 2 x 502.91.980 4 x 8 502.91.981 33 2 x 8, 1 x 17 502.91.982 34 2 x 17 502.91.983 500 42 2 x 8, 1 x 26 502.91.984 48 2 x 8, 1 x 502.91.985 52 2 x 26 502.91.986 64 2 x 502.91.987 50 2 x 8, 2 x 17 502.91.988 600 68 2 x 8, 2 x 26 502.91.989 80 2 x 8, 2 x 502.91.990 Packing: 1 set 20
GRASS STUDIO DWD-XP One2Five WASTE SYSTEM COMPONENTS > Area of application: As lid/cover plate or shelf above one2five waste bin system One2five components - Lid cover plate Cabinet width (mm) 16 mm Cabinet ends 18 mm Cabinet ends 300 502.90.641-400 502.90.643 502.90.653 450 502.90.644 502.90.654 500 502.90.645 502.90.655 600 502.90.647 502.90.657 One2Top functional lid system - Functional lid For pail capacity (L) Shallow Deep 5.5, 8 502.90.101 502.90.111 12, 17, 26, 502.90.102 502.90.122 Packing: 1 set One2Top functional lid system - Lid with bio-filter For pail capacity (L) 5.5, 8 502.90.131 12, 17, 26, 502.90.1 Replacement bio filter 502.90.199 > Area of application: For supporting lid cover plate Packing: 1 set One2five components - Lid cover plate suspension rail 502.90.690 One2Top functional lid system - Cleaning set For pail capacity (L) 12, 17, 26, 502.90.162 Packing: 1 set One2five components - Hanging waste bin frame Cabinet width (mm) 16 mm Cabinet ends 18 mm Cabinet ends 300 502.90.781 502.90.791 400 502.90.783 502.90.793 450 502.90.784 502.90.794 500 502.90.785 502.90.795 600 502.90.787 502.90.797 Packing: 1 set One2Top functional lid system - Dust pan set For pail capacity (L) 12, 17, 26, 502.90.153 Packing: 1 set 21
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP One2Four waste bin components Beech timber inserts Beech timber inserts Bin capacity (L) 8 502.90.501 17 502.90.502 Bin capacity (L) 5.5 502.90.510 12 502.90.512 Beech timber inserts Bin capacity (L) 26 502.90.503 502.90.504 > Area of application: For 16 mm carcase, Trimmable for GRASS STUDIO DWD-XP and Blum Tandembox/Intivo drawers with nominal length 500 mm > Material: 100% recyclable polystyrene Pre-cut anti-slip mats Cabinet width (mm) 300 502.90.542 400 502.90.543 450 502.90.544 600 502.90.547 300 mm Cabinet width 400 mm Cabinet width 450 mm Cabinet width 600 mm Cabinet width Note > Order One2Top lid system separately. 22
GRASS STUDIO DWD-XP UNDER OVEN DRAWER 548 422 Drawer front adjustment 3 mm 2.5 mm 454 550 2 mm 8 mm chipboard can be inserted here > Area of application: Fits beneath a built-in overn, utilises bottom of the cabinet and kick space > Material: Plastic, Aluminium grey coloured Designed to accept 8 mm base if required > Load capacity (kg): 40 (by means of STUDIO runner) > Adjustment: Vertical ± 2.5 mm Horizontally ± 3 mm > Mounting: Fits both 16 and 18 mm carcass 30.5 12 18 2 224 507 Under oven drawer set For cabinet width (mm) 600 558.61.506 Packing: 1 set Supplied with: > 1 Oven drawer module > 2 Drawer front fixing brackets > 2 Plinth fixing brackets > 2 Runner fixing clips > 4 Spacers > 1 Pair 40 kg full extension DYNAMIC runners with integrated Soft Close Drawer front fixing bracket HAILO KITTY STORAGE CONTAINER Plinth fixing bracket 45 mm adjustment 11 21 > Features: Dishwasher safe Non-slip feet Odour tight lid > Capacity (L): 4 > Dimensions (mm): 250 x 160 x 170 (WxDxH) Kitty storage container 60 to underside edge of drawer front, 7 mm adjustment 48 Finish Graphite with grey lid and handle 540.35.300 23
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP CONNECT DRAWER INSERT CoNNeCT A Finish Dark Grey 556.37.517 light Grey 556.37.617 packing: 1 kit Supplied with: > 1 x connect 40/20 tray > 2 x connect 20/10 twin dividers > 1 x connect 20/10 angle divider (left) > 4 x connectors > 1 x non-slip mat CoNNeCT B > Area of application: Suitable for drawers with a depth of 450 or 500 mm > Material: Plastic Finish: light Grey or Dark Grey Features: Uses a practical 25 mm grid system to create a unique and customised drawer dividing system Includes cuttable non-slip mat with every version (size: 526 x 480 mm) Finish Dark Grey 556.37.527 light Grey 556.37.627 packing: 1 kit Supplied with: > 1 x connect 40/20 tray > 4 x connect 20/10 angle divider (left) > 5 x connectors > 1 x non-slip mat CoNNeCT C Tray 40/20 Finish Dark Grey 556.37.537 light Grey 556.37.637 packing: 1 kit Tray 30/10 Supplied with: > 1 x connect 40/20 tray > 2 x connect 20/10 angle dividers (1 x left and 1 x right) > 3 x connectors > 1 x non-slip mat Twin Divider 20/10 CoNNeCT D Finish Dark Grey 556.37.547 light Grey 556.37.647 packing: 1 kit Angle Divider Left and Right 20/10 Supplied with: > 1 x connect 30/10 tray > 2 x connect 20/10 angle dividers (1 x left and 1 x right) > 3 x connectors > 1 x non-slip mat Connector Non-Slip Mat 24
GRASS STUDIO DWD-XP Magic sorto A Magic Sorto Set 450+ Nominal Length 500 and cabinet widths from 450 mm or more. Supplied with: > 3 Sorto trays 270 x 90 mm > 3 Sorto trays 180 x 90 mm > 1 Spacer 270 mm > For 550 mm nominal length > 1 Divider support > Material: Stainless steel > For drawer depth (mm): 500 or 550 > Features: Dishwasher resistant Safe and hygienic for food stuffs Modular based expandable system SORTO Insert tray sets Cabinet width (mm) Finish A 450 500 559.97.160 B 600 500 559.97.165 C 600 500 559.97.170 Packing: 1 set B Magic Sorto Set 600+ Nominal Length 500 and cabinet widths from 600 mm or more Supplied with: > 4 Sorto trays 270 x 90 mm > 4 Sorto trays 180 x 90 mm > 2 Spacers 180 mm > 1 Divider support C Magic Sorto Set NL 600+ Nominal Length 500 and cabinet widths from 600 mm or more. Supplied with: > 1 Sorto tray 450 x 90 mm > 3 Sorto trays 270 x 90 mm > 3 Sorto trays 180 x 90 mm > 1 Divider support 66 409 22 40 > Material: Stainless steel > Finish: Alu-metallic > Mounting: tool-free Magic sorto divider For drawer depth (mm) 500 559.97.912 25
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP CUSIO drawer inserts 300 mm 400 mm 450 mm 500 mm 600 mm 700 mm 800 mm 900 mm > Area of application: For all GRASS STUDIO DWD_XP, Blum Tandembox/Intivo drawers with a nominal length of 500 mm > Material: 100% recyclable food grade polypropylene > Tray length (mm): 480 > Tray height (mm): 55 1000 mm 1200 mm 94 (144) 52 43 > Material: 100% recyclable food grade polypropylene > Version: Grey > Mounting: Sits in cutlery tray Knife block For compartment For number of knives 100 mm width 3 556.90.581 150 mm width 4 556.90.582 Cusio cutlery tray 48 473 Cabinet width (mm) Actual tray width (mm) Graphite translucent White translucent 300 220 558.90.330 556.90.730 400 0 558.90.331 556.90.731 450 370-556.90.7 500 420 558.90.333 556.90.733 600 520 558.90.334 556.90.734 700 620-556.90.739 800 720 558.90.335 556.90.735 900 820 556.90.336 556.90.736 1000 920 558.90.337 556.90.737 1200 1120-556.90.738 > Area of application: For use on the side of drawer inserts, when the drawer is wider than the cutlery insert and only one insert is required > Material: 100% recyclable food grade polypropylene > Version: Suitable for left or right side > Mounting: Slides into cutlery insert End piece Finish Graphite translucent 556.90.391 White translucent 556.90.691 26
GRASS STUDIO DWD-XP cusioflex drawer inserts block - beech drawer inserts > Material: Solid European beech, clear lacquered > For carcase width (mm): 400-600 or 800-1000 > Height (mm): 50 > Features: Insert has two layers - bottom layer slides out to fit drawer width L layers can be screw fixed together in preferred position using screw hole at front and back of drawer insert if required > Insert width (mm): 300-530 or 800-1000 BLOCK wooden cutlery insert For cabinet width (mm) 400-600 556.98.311 800-1000 556.98.312 Packing: 1 set > Area of application: For organising plates, dishes, pots, pans and other kitchen items > Material: 100% recyclable polystyrene > Finish: White or black corners with graphite or white translucent middle sections > Features: Subdivision frame with telescopic adjustability Flexible for use in all popular drawer sizes and styles Cusioflex drawer insert set Version Finish 2 frames White trans. white corners 556.81.772 3 frames White trans. white corners 556.81.773 2 frames Graphite trans. black corners 556.81.3 Packing: 1 set 300 470 412/420 360 580 300 360 580 27
GRASS CAtAloGUe / 2016 GRASS StUDIo DWD-xP AGo-VARIo CUtleRY tray (DePtH 440-490MM) White texture finish Cabinet width (mm) Actual width (mm) 450 350-390 556.53.745 500 400-440 556.53.750 600 500-540 556.53.760 800 700-740 556.53.780 900 800-840 556.53.790 Packing: C 1 piece Carbon fibre finish Cabinet width (mm) Actual width (mm) 600 500-540 556.53.260 800 700-740 556.53.280 900 800-840 556.53.290 Silver grey finish To suit cabinet width (mm) Tray width (mm) 400 300-340 556.53.540 450 350-390 556.53.545 500 400-440 556.53.550 600 500-540 556.53.560 800 700-740 556.53.580 900 800-840 556.53.590 1000 900-940 556.53.600 Stainless steel finish Cabinet width (mm) Actual width (mm) 600 500-540 556.53.060 800 700-740 556.53.080 900 800-840 556.53.090 28
GRASS StUDIo DWD-xP AGo-VARIo CUtleRY tray (DePtH 490-530MM) > Material: Multiplex beech > Finish: lacquered > Fixing Method: Self-adhesive Knife block 556.53.310 Silver grey finish > Area of Application: For spice jars with Ø55 mm > Material: Multiplex beech > Finish: lacquered > Drilling Diameter (mm): Ø57 Cabinet width (mm) Actual width (mm) Spice jar insert 500 400-440 556.53.835 600 500-540 556.53.837 800 700-740 556.53.839 900 800-840 556.53.840 Number of spice jars Version 6 3 556.53.311 12 4 556.53.312 > Material: Multiplex beech > Finish: lacquered > Fixing Method: Self-adhesive > Area of Application: Suitable for spice jar insert > Material: lead crystal glass, lid, rubber sealing ring > Finish: Clear > Version: lid with sealing ring > Diameter (mm): Ø55 at base, Ø61 at lower edge of glass, Ø64 with glass edge Divider Spice jar with glass lid 556.53.319 Height (mm) 58 with lid, 50 without lid 543.95.100 Note > only Beech divider 556.53.319 can be used with the 550 mm tray depth option. 29
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP exzellent cutlery inserts > Material: Plastic (vacuum formed) > Finish: White grained or silver grained > Version: With wide edge for cutting to exact drawer size > Thickness (mm): 2.5 (original material) > Depth (mm): 440 490 > Height (mm): 50 Silver textured finish SPICE DRAWER TRAY Cabinet width (mm) Actual tray width (mm) 300 200-240 556.62.121 350 250-290 556.62.122 400 300-340 556.62.123 450 350-390 556.62.124 500 400-440 556.62.125 600 500-540 556.62.127 700 600-640 556.62.128 800 700-740 556.62.129 900 800-840 556.62.130 White textured finish Cabinet width (mm) Actual tray width (mm) 300 200-240 556.62.621 350 250-290 556.62.622 400 300-340 556.62.623 450 350-390 556.62.624 500 400-440 556.62.625 600 500-540 556.62.627 700 600-640 556.62.628 800 700-740 556.62.629 900 800-840 556.62.630 > Area of application: For storage of spice jars > Material: Plastic (vacuum formed) > Finish: White gloss or silver gloss > Size (mm): 1300 x 550 (W x xd) > Inside drawer height (mm): Min. 83 > Thickness (mm): 3 Spice drawer tray Finish White gloss 556.79.706 Silver gloss 556.79.506 Note > Timber inserts not included 30
GRASS StUDIo DWD-xP exzellent SPICe InSeRtS > Material: Plastic (vacuum formed) > Finish: White grained or silver grained > Version: With wide edge for cutting to exact drawer size > thickness (mm): 2.5 (original material) > Dimensions (mm): 440 490, x 50 (DxH) > Material: Plastic (vacuum formed) > Finish: White grained or silver grained > Version: With wide edge for cutting to exact drawer size > thickness (mm): 2.5 (original material) > Dimensions (mm): 440 490, x 50 (DxH) Cutlery Insert Dimensions 450 mm 900 mm Silver textured finish Cabinet width (mm) Actual tray width (mm) 400 300-340 556.63.552 450 350-390 556.63.553 500 400-440 556.63.554 600 500-540 556.63.556 700 600-640 556.63.562 800 700-740 556.63.557 900 800-840 556.63.558 White textured finish Cabinet width (mm) Actual tray width (mm) 400 300-340 556.63.752 450 350-390 556.63.753 500 400-440 556.63.754 600 500-540 556.63.756 700 600-640 556.63.762 800 700-740 556.63.757 900 800-840 556.63.758 Silver textured finish Cabinet width (mm) Actual tray width (mm) 450 350-390 556.62.583 500 400-440 556.62.584 600 500-540 556.62.586 700 600-640 556.62.588 Silver textured finish Cabinet width (mm) Actual tray width (mm) 450 350-390 556.65.748 500 400-440 556.65.757 600 500-540 556.65.766 700 600-640 556.62.888 31
GRASS CATALOGUE / 2016 GRASS STUDIO DWD-XP banio UNDER SINK organisation system Storage tray (order separately) Frame Set Fixing rail (2 included with Frame Set) > Suitable for: Universal drawers > Version: length and width adjustable by cutting centre and side components > Material: Plastic > Finish: White > Supplied with: 2 x side components 1 x centre component 2 x positioning strips 2 x rear panel brackets Banio frame set Rear bracket (included with Frame Set) 99-435 270-500 556.23.704 84 x 168 30 184 mm Packing: 20 pieces 84 x 252 R 26.9 max. R 26.9 max 84 x 84 46 283 mm > Length x height x depth: 505 x 27 x 8 mm > Fix to flat surface such as cabinet wall with double-sided adhesive tape or glue (ensure adhesive used is suitable for application). For use without frame set. > Material: Plastic > Finish: White > Dimensions: 505 x 27 x 8 mm Banio fixing rail 556.23.790 > Suitable for: Banio frame set, fixing rail or free standing > Version: Robust and easy to clean > Material: Plastic > Finish: White translucent > Dimensions: Small tray: 65 x 84 x 84 mm Medium tray: 65 x 168 x 84 mm Large tray: 65 x 251 x 84 mm Banio storage trays Type Small 556.23.720 Medium 556.23.721 Large 556.23.722 Set 1 x sml, 1 x med, 1 x lrg 556.23.728 Set 2 x sml, 2 x med, 2 x lrg 556.23.729
GRASS TIOMOS HINGES
GRASS CAtAloGUe / 2016 tiomos HInGeS In MoSt CASeS A MASteRPIeCe IS the SUM total of SMAll StRokeS of A GenIUS One Range To Cover All Applications. Consistent design solutions are only possible when all kinds of door applications can be covered by a single hinge system. the systematically extended tiomos range provides perfect movement solutions for nearly all applications, with and without damping function. Perfect Alignment With A Twist Of The Hand. For fine adjustment, the tiomos hinge system offers three movement dimensions: Depth adjustment by +3 / -2 millimetres; it is based on a worm gear principle and is continuous and self-locking; height can be adjusted by +/- 2.5 millimetres; overlay adjustment is +/- 2 millimetres with limit stop. Another Stroke Of Genius Is The New Kinematics Inside Tiomos. thanks to physically optimised lever movements, furniture doors fitted with tiomos are extremely easy to open. in addition, this unique kinematic mechanism makes unprecedented alignment possible with minimum gaps. these unique characteristics of the new hinge system are of special benefit to furniture designers because the reduction in gaps and reveals opens up new possibilities in furniture design. one of the outstanding characteristics of the new tiomos hinge system is the soft-close damper which can be adjusted in stages and which is fully concealed within the hinge arm. the complex inner workings of this high-tech hinge are hidden from view, much like a swiss clock movement, and cannot fail to impress with their unique damping characteristics. the closing process in each movement phase is smooth and completely without transition, irrespective of the size and weight of the door. 34
TIOMOS hinge 110 drilling pattern 48/6 + 52/5.5 or press fit mounting 48/6 110 > Features: optimum reveals for door thicknesses up to 24 mm Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Suitable for doors up to 36 mm thick with angle reduction clip > Options: With integrated damper (3 adjustable damping levels) Without integrated damper Without spring (push to open) > Material: Cup: Steel, nickel plated Arm: (Full overlay / Overlay): Steel, nickel plated Arm: (Half overlay / Inset) Zinc, nickel plated Combination drilling pattern Cup dimensions 35 + 0.1 35 + 0.1 40.5 min. 12.6 40.5 8 52 10 5.5 48 10 6 64.5 Versions Full overlay Overlay Half overlay Version Cranking (K) Impresso Press-fit Full overlay With soft close 0 348.31.770 348.31.760 Without soft close 348.31.570 - Overlay With soft close 3 348.31.771 348.31.761 Without soft close 348.31.571 348.31.561 Without spring 348.31.371 - Half overlay With soft close 9.5 348.31.772 348.31.762 Without soft close 348.31.572 348.31.562 Inset With soft close 19 348.31.773 348.31.763 Without soft close 348.31.573 348.31.563 Packing: 150 pieces Inset 35
GRASS CATALOGUE / 2016 TIOMOS TECHNICAl INFORMATION Full overlay K0 Overlay K3 Half overlay K9.5 Inset K19 24 24 31 40.5 84.5 84.5 84.5 86 13 13 3-7 F 15 10 3-7 F 21.5 2 x F 3.5 3-7 F 31 3-7 F Cup distance (mm) Cup distance (mm) Cup distance (mm) Cup distance (mm) 3 4 5 6 7 3 4 5 6 7 3 4 5 6 7 3 4 5 6 7 24.0-2 21.0-2 14.5-2 0.0 0 2 3 23.0-2 20.0-2 13.5-2 0.5 3.5 22.0-2 0 19.0-2 0 12.5-2 0 1.0 0 2 3 Door overlay (mm) 21.0-2 0 20.0-2 0 2 19.0 0 2 3 18.5 3.5 18.0 0 2 3 17.5 3.5 17.0 2 3 16.5 3.5 16.0 2 3 15.5 3.5 15.0 3 14.5 3.5 Door overlay (mm) 18.0-2 0 17.0-2 0 2 16.5 16.0 0 2 3 15.5 3.5 15.0 0 2 3 14.5 3.5 14.0 2 3 13.5 3.5 13.0 2 3 12.5 3.5 12.0 3 11.5 3.5 Door overlay (mm) 11.5-2 0 10.5-2 0 2 10.0 9.5 0 2 3 9.0 3.5 8.5 0 2 3 8.0 3.5 7.5 2 3 7.0 3.5 6.5 2 3 6.0 3.5 5.5 3 5.0 3.5 Door reveal (mm) 1.5 3.5 2.0 2 3 3.0 2 3 4.0 3 Mounting plate height Mounting plate height Mounting plate height Mounting plate height Minimum gap Minimum reveal Minimum reveal - 85º * Door thickness (mm) Cup distance (mm) 3 4 5 6 7 24.0 1.0 1.0 1.0 1.2 1.2 22.0 1.0 1.0 1.0 1.0 1.5 21.0 1.0 1.0 1.0 1.0 1.2 20.0 1.0 1.0 1.0 1.0 1.0 19.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 17.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Door thickness (mm) Cup distance (mm) 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Cup distance (mm) 3 4 5 6 7 36.0 11.1 10.3 9.7 9.1 8.5 30.0 5.4 4.8 4.4 4.3 4.2 28.0 3.7 3.6 3.5 3.4 3.3 26.0 2.9 2.8 2.8 2.7 2.6 24.0 2.2 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 16.0 0.6 0.6 0.6 0.6 0.6 Minimum gap Minimum reveal (F) Minimum reveal (F) * When angle reduction clip is used Door thickness (mm) The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance. Minimum reveal dimensions based on doors with bevelled edges with radius of 1mm. For door thicknesses of 24 mm and above, a trial fitting is recommended. 36
TIOMOS hinge 160 DRILLING pattern 48/6 + 52/5.5 or press fit mounting 48/6 160 > Features: Suitable for doors up to mm thick Convenient depth adjustment via worm gear For cabinets with inset drawers or pull-out shelves due to zero protrusion feature (at 90º) 3-dimensional adjustment with appropriate mounting plate Minimum reveals > Options: With integrated damper (3 adjustable damping levels) Without integrated damper > Material: Zinc, nickel-plated Combination drilling pattern Cup dimensions 35 + 0.1 35 + 0.1 40.5 min. 10 40.5 8 52 10 5.5 48 10 6 64.5 Versions Full overlay Overlay Version Cranking (K) Impresso Press-fit Full overlay With soft close 0 348..770 348..760 Without soft close 348..570 348..560 Overlay With soft close 3 348..771 348..761 Without soft close 348..571 348..561 Half overlay With soft close 9.5 348..772 - Packing: 50 pieces Half overlay 37
GRASS CATALOGUE / 2016 TIOMOS TECHNICAl INFORMATION Full overlay K0 Overlay K3 Half overlay K9.5 Inset K19 64 67 73.5 83 84.5 84.5 84.5 86 3.4 13 3-10 F 0.4 10 3-10 F 6.1 2x F 3.5 3-10 F 15.6 6 3-10 F Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Cranking 0, Mounting plate height 21 Cup distance (mm) Cup distance (mm) Cup distance (mm) Cup distance (mm) 3 4 5 6 7 8 9 10 3 4 5 6 7 8 9 10 3 4 5 6 7 8 9 10 3 4 5 6 7 8 9 10 27.0-2 24.0-2 17.5-2 0.0 19 21 26.0-2 23.0-2 16.5-2 0.5 25.0-2 0 22.0-2 0 15.5-2 0 1.0 19 21 24.0-2 0 21.0-2 0 14.5-2 0 1.5 23.0-2 0 2 20.0-2 0 2 13.5-2 0 2 2.0 21 22.0-2 0 2 3 19.0-2 0 2 3 12.5-2 0 2 3 3.0 21 21.0-2 0 2 3 18.0-2 0 2 3 11.5-2 0 2 3 4.0 20.0-2 0 2 3 17.0-2 0 2 3 10.5-2 0 2 3 19.0 0 2 3 16.5 3.5 10.0 3.5 18.5 3.5 16.0 0 2 3 9.5 0 2 3 18.0 0 2 3 15.5 3.5 9.0 3.5 17.5 3.5 15.0 0 2 3 8.5 0 2 3 17.0 2 3 14.5 3.5 8.0 3.5 Door overlay (mm) 16.5 3.5 16.0 2 3 15.5 3.5 15.0 3 14.5 3.5 Door overlay (mm) 14.0 2 3 13.5 3.5 13.0 2 3 12.5 3.5 12.0 3 11.5 3.5 Door overlay (mm) 7.5 2 3 7.0 3.5 13.0 2 3 12.5 3.5 12.0 3 11.5 3.5 Door reveal (mm) Mounting plate height Mounting plate height Mounting plate height Mounting plate height Minimum gap Minimum reveal 0 Cup distance (mm) 3 4 5 6 7 8 9 10 0 Cup distance (mm) 3 4 5 6 7 8 9 10.0 1.0 1.0 31.0 1.0 1.0 1.0 30.0 1.0 1.0 1.0 29.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 28.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 26.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 25.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0.0 0.2 0.2 31.0 0.2 0.2 0.2 0.2 30.0 0.2 0.2 0.2 0.2 0.2 29.0 0.2 0.2 0.2 0.2 0.2 0.2 0.2 28.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 26.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 25.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hindrance. Door thickness (mm) 24.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 22.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 21.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 20.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Minimum gap Door thickness (mm) 24.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 22.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 21.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 20.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 18.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 16.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Minimum reveal (F) Minimum reveal dimensions based on doors with bevelled edges with radius of 1mm. For door thicknesses of 24 mm and above, a trial fitting is recommended. 38
TIOMOS +45 corner angle hinge drilling pattern 48/6 + 52/5.5 or screw-fix mounting 48/6 > Features: For 45 angled cabinets Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Minimum reveals > Options: With integrated damper (3 adjustable damping levels) Without integrated damper > Material: Cup: Steel nickel-plated Arm: Zinc, nickel-plated 110 Combination drilling pattern Cup dimensions 52 35 + 0.1 10 5.5 64.5 40.5 min. 12.6 Version Impresso Screw-fix Overlay With soft close - 348.35.741 48 35 + 0.1 10 6 48 35 + 0.1 6 min. 12.6 40.5 8 Without soft close - 348.35.745 Inset With soft close 348.35.776 348.35.746 Without soft close 348.35.576 - Packing: 100 pieces Versions Full overlay Inset 39
GRASS CATALOGUE / 2016 TIOMOS +45 corner angle hinge drilling pattern 48/6 + 52/5.5 or screw-fix mounting 48/6 Overlay Inset Inset 28 19 36 19 40 16 56 19 42 19 X + 47.5 7 X + 47.5 X 0 X + 47.5 X 0 X + 47.5 X 37 84.5 X 4 16.5 5.5 6.6 6.5 2 1.2 5.5 5.5 6 Door overlay (mm) 31.5 2.5 11.5 16.5 Mounting plate height 0 Mounting plate height 8 Mounting plate height 15 Mounting plate height 14 Cup distance (mm) 3 4 5 6 7 19.5 0 19.0 18.5 0 18.0 17.5 0 17.0 16.5 0 2 16.0 15.5 0 2 15.0 3 14.5 2 3.5 14.0 3 13.5 2 3.5 13.0 3 12.5 2 3.5 12.0 3 11.0 3 6 10.0 6 Mounting plate height 1.5 19 1.5 19 Cup distance (mm) 0 2 3 3.5 6 X 30.5 28.5 27.5 27.0 24.5 Cross mounting plate position (X) X X Cup distance (mm) 0 2 3 3.5 X 13.5 11.5 10.5 10.0 Linear mounting plate position (X) 19 Door overlay (mm) Door thickness (mm) 19 19 Cup distance (mm) 3 4 5 6 7 22 15.5 21 14 15 20 14 15 15.5 19 12 15 15 18 12 14 17 12 16 12 15 9 12 Mounting plate height Cup distance (mm) X 3 4 5 6 7 22 59.0 57.5 56.5 21 57.5 56.5 20 56.5 55.0 19 55.0 18 56.0 17 54.5 16 54.5 54.0 53.0 15 53.0 52.5 Mounting plate position Minimum gap Door thickness (mm) Cup distance (mm) 3 4 5 6 7 24.0 1.0 1.0 1.0 1.2 2.1 22.0 1.0 1.0 1.0 1.0 1.5 21.0 1.0 1.0 1.0 1.0 1.2 20.0 1.0 1.0 1.0 1.0 1.0 19.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 17.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap Minimum reveal Door thickness (mm) Cup distance (mm) 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can open without hinderance. Minimum reveal dimensions based on doors with bevelled edges with radius of 1mm. From 22 mm door thickness and above, we recommend a trial fitting. 40
TIOMOS blind panel hinge drilling pattern 48/6 + 52/5.5 or press-fit mounting 48/6 > Features: Hinge for blind corner constructions Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Minimum reveals > Options: With integrated damper (3 adjustable damping levels) Without integrated damper > Material: Cup: Steel nickel-plated Arm: Zinc, nickel-plated 95 Combination drilling pattern Cup dimensions 52 35 + 0.1 10 5.5 40.5 min. 12.6 40.5 8 Version Impresso Press-fit Inset With soft close 348.37.773 348.37.763 35 + 0.1 64.5 Without soft close 348.37.573 348.37.563 48 10 6 Packing: 150 pieces Installation information Minimum reveal (F) min. 90 74.5 31 X X Drilling dist. (X) 25.5 3-7 F Cup distance (mm) 4 5 6 7 28.0 1 0 27.0 2 1 0 26.0 3 2 1 0 Door thickness (mm) Cup distance (mm) 3 4 5 6 7 24.0 2.1 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Door reveal Cup distance (mm) Minimum reveal (F) X Drilling dist. (X) 4 5 6 7 11.0 1 0 10.0 2 1 0 9.0 3 2 1 0 Door reveal Minimum reveal for doors with bevelled edges with radius of 1mm. Use mounting plate height 3 to ensure that door is flush fitting. Hinge dimensions and reveal calculation based on factory setting. Door protrudes inwards when fully opened. 41
GRASS CATALOGUE / 2016 TIOMOS corner door hinge knock-in or screw fix mounting 48/6 > Features: For connecting two corner cabinet doors For door thicknesses up to max. 24 mm (factory setting is for 19 mm door thickness with 3.5 mm cup distance) 35 mm full cup drilled hole Low cup depth of 11.8 mm 3-dimensional adjustment with appropriate mounting plate Without integrated damper > Material: Zinc, nickel-plated Drilling patterns Cup dimensions 35 + 0.1 35 +0.1 35 +0.1 39 min. 11.8 39 Version 3 Screw-fix 348.29.640 48 48 10 6 6 48 10 6 62 Knock-in 348.29.690 35 +0.1 35 + 0.1 35 +0.1 35 + 0.1 39 min. 11.8 39 3 39 min. 11.8 Packing: 150 pieces 39 3 48 6 6 10 48 48 48 6 10 6 62 62 Installation information 84,5 84,5 160º angle hinge 84,5 TA = 3,5 TA = 3,5 19 37 84,5 0,5 0,5 65 37 65 84,5 19 23 19 23 TA = 3,5 37 0,5 65 19 mm door thickness (factory setting) Mounting plate 14 height 0 84,5 14 23 TS TA = 3,5 19 Corner 37 door hinge 0,5 65 23 19 TA = 3,5 TA = 3,5 19 14 37 3784,5 0,5 65 0,5 65 16 23 14 23 TA = 3,5 TA = 3,5 3784,5 37 16 mm door thickness Mounting plate height 0 15 0,5 65 0,5 65 24 23 15 23 65 25 TS TA = 3,5 84,5 37 0,5 65 23 16 TA = 3,5 16 84,5 37 0,5 65 1 2 23 24 24 24 mm door thickness Mounting plate height 0 16 24 3 1 2 3 TS 42 65 TS
TIOMOS accessories Opening angle reduction clip 85 Can be used for all standard 110 and 120 Tiomos hinges. Prevents the door from colliding with kitchen unit fronts or walls (when fitted at corners). Easy fitting without tools. Steel, without nickel-plating. Opening angle reduction clip 120 Can be used for all Tiomos 160 wide angle hinges. Prevents the door from colliding with kitchen unit fronts or walls (when fitted at corners). Easy fitting without tools. Plastic, black. 348.40.010 348.40.011 Packing: 500 pieces Assembly instructions Opening angle reduction clip 85º Opening angle reduction clip 120º 85 120 9 Cover caps Version Cranking Hinge arm cover cap - Short 0, 3, 9.5, 19 mm 348.40.000 Steel, nickel-plated Hinge arm cover cap - Long 0, 3 mm 348.40.002 Steel, nickel-plated Hinge cup cover cap Steel, nickel-plated 348.40.001 Packing: 100 pieces 43
GRASS CATALOGUE / 2016 TIOMOS mounting plates ECO Cruciform mounting plate, 3-point fixing (Ø 6.3 x 13.5 ) 37 26 12 Ø 5 Version Height (mm) Steel, nickel-plated -2 348.38.550 Fixing with pre-assembled Euro screws (13.5 mm) 0 348.38.551 Height adjustment via slots 2 348.38.552 3 348.38.553 3.5 348.38.554 Cruciform mounting plate, 4-point fixing 37 (Ø 6.3 x 13.5) 12 Version Height (mm) Steel, nickel-plated 0 348.38.521 Fixing with pre-assembled Euro screws (13.5 mm) 2 348.38.522 Convenient height adjustment via worm gear 3 348.38.523 Ø 5 20 Cruciform mounting plate, 4-point fixing, for twin application 37 (Ø 6.3 x 10) Ø 5 20 7.5 Version Height (mm) Steel, nickel-plated 0 348.38.531 Fixing with pre-assembled Euro screws (10 mm) 2 348.38.5 Convenient height adjustment via worm gear 3 348.38.533 3.5 348.38.534 Packing: 150 pieces Linear mounting plate, 2-point fixing Ø 3.5 20 Version Height (mm) Steel, nickel-plated Fixing with wood screws Ø3.5 x 15mm or with Euro screws Ø6.3 x 13.5mm Convenient height adjustment via worm gear 2 348.38.002 Packing: 150 pieces Cruciform mounting plate, 2-point fixing 37 (Ø 6.3 x 13.5) 12 Ø 5 X Version Height (mm) Zinc / steel, nickel-plated 6 348.39.501 Fixing with pre-assembled Euro screws (13.5 mm) 8 348.39.502 Convenient height adjustment via worm gear 9 348.39.503 12 348.39.504 14 348.39.506 15 348.39.507 19 348.39.508 21 348.39.509 44
TIOMOS TECHNICAl INFORMATION Full overlay vs overlay With the GRASS TIOMOS hinge offering we see the introduction of a full overlay or 0 mm cranking hinge option. To consider a standard application with a traditional full overlay hinge (now clasified as Overlay or 3 mm cranking) with a 5 mm distance to cup and a 0 mm mounting plate we achieve a 17 mm overlay which is typical of most hinge systems, however with the same set up and the new Full overlay hinge (0 mm cranking) we achieve a 20 mm door overlay. With the new kinematics available to us with GRASS TIOMOS and the new 0 mm Cranking Full Overlay hinges we can achieve an impressive 24 mm door overlay with door thicknesses upto 36 mm while maintaining a standard 35 mm drilling pattern. This opens up a multitude of design applications without complicating your ordering or construction processes. Installation dimensions Overlay A Hinge arm length B Hinge arm height C Door protrusion D Mounting plate distance E Cup distance F Gap G Door overlay J Material thickness K Cup overlay Impresso installation Door adjustments (applies to all Tiomos hinges) Description Side adjustment with limit stop +/-2 mm Convenient depth adjustment via worm gear +3/-2 mm Height adjustment with mounting plate +/-2 mm The height adjustment option depends on the type of mounting plate. All adjustments can be carried out independently of each other. 45
GRASS CATALOGUE / 2016 TIOMOS TECHNICAl INFORMATION Number of hinges per door The number of hinges is determined by the door height, door weight, quality of the material and the fixing of the mounting plate. The load and height data refer to 600 mm standard door widths. In case of doubt, the number of hinges should be determined with a trial fitting. Example: For a door measuring 2000 x 600 mm and a weight of 13 kg, we recommend 4 hinges. The table is applicable to hinges with and without integrated damper. 2500 2000 1600 2 3 4 5 900 600 mm mm kg 6 10 17 22 Tool-free damper adjustment light setting Medium setting (factory setting) Strong setting Adjustment lever points: > towards the carcase suitable for: > small, light-weight doors Adjustment lever points: > Downwards when fitted on the left, and upwards when fitted on the right suitable for: > standard doors Adjustment lever points: > Away from the carcase suitable for: > Large, heavy doors the damping force of each hinge can be set individually. A simple lever adjustment is all that is required to increase or reduce the damping force as required. 46
hinge drilling tools hinge door drilling jig > Features: Complete set for rapid, precise and professional mounting of furniture doors and drilling of the required holes Different drilling patterns can be adjusted (the drilling pattern 52/5.5 is factory set) Comprehensive operating instructions that contain detailed description of the work procedures Supplied with: > 1 Drilling jig with drilling template and drill bit > 1 Vertical stop, continuously adjustable > 2 Double screw clamps > 1 Marking gauge > 1 Set of operating instructions Drilling jig 001.33.000 Grass screw driver A Continuously adjustable vertical stop B Double screw clamp for rapid fixing of door to cabinet C Marking jig for transferring the row of holes to the concealed hinge 006.28.1 > Features: For simple marking and predrilling of Tiomos hinges and mount plates Drilling template for Tiomos hinges Drilling pattern 48/6 001.33.160 47
GRASS CAtAloGUe / 2016 DRIllInG AnD InSeRtIon MACHIneRY tecmator eco P tecmator eco M > Suitable for: Furniture hinges drilling and inserting press fi tting hinges. Mounting plates with dowels drilling and inserting. Drawer front fi ttings drilling. Rows of holes mm series drilling. > Features: Gearbox with drilling depth stop 6-spindle vertical drilling gear including quick-change drill chucks Insertion die arm, Revolver stop Pneumatic hold-down block table adjustment with clamping lever Connection for plastic dust extraction Ø 100 mm > Dimensions (mm): 730 x 450 x 660 (WxDxH) Work table: 300 x 720 > Power supply: Single phase 220 V, 1.1 kw motor > Suitable for: Furniture hinges drilling and inserting press fi tting hinges. Mounting plates with dowels drilling and inserting. Drawer front fi ttings drilling. Rows of holes mm series drilling. > Features: Gearbox with drilling depth stop 6-spindle vertical drilling gear including quick-change drill chucks Insertion die arm table adjustment with clamping lever Connection for plastic dust extraction Ø 100 mm Compact design and sturdy frame > Dimensions (mm): 730 x 580 x 980 (WxDxH) Work table: 300 x 720 > Power supply: Single phase 220 V, 1.1 kw motor Suitable for 48/6 hinge pattern 001.97.051 Suitable for 48/6 hinge pattern 001.97.052 QUICk CHAnGe DRIll CHUCkS InSeRtIon DIeS 001.97.370 Version For tiomos 110 348.40.060 SIDe StoP 10 MM Version 10 mm left 001.97.616 10 mm right 001.97.617 48
FREE FAMILY FLAP FITTINGS
GRASS CATALOGUE / 2016 FREE FLAP TECHNICAl INFORMATION 1.5 X Y 168 26 107º 108 Y 168 108 Y 1.5 26 X 107º Y Ø 5x12 37 38 Ø 5x12 37 38 15.5 24.5 Carcase thickness 34 Carcase thickness 1.5 1.5 X Y 15.5 185 185 131 Y 131 Y 26 Ø 5x12 64 37 38 166 24.5 Carcase thickness 34 Carcase thickness 15.5 38 166 24.5 Carcase thickness Ø 5x12 64 50 37 Carcase thickness 34
free flap Free flap 1.7 Cabinet height (mm) Flap weight (kg) Model A Model B Model C 200 1.7-4.6 3.6-7.9 6.8-14.7 250 1.3-3.8 2.9-6.4 5.4-11.8 300 1.1-3.1 2.4-5.1 4.4-9.6 350 0.9-2.6 2.0-4.2 3.7-8.1 400 0.8-2.1 1.7-3.6 3.2-7.0 450 0.6-1.7 1.4-3.2 2.7-6.1 A 372.91.720 B 372.91.721 C 372.91.722 Packing: 1 set Supplied with: > > Free Flap 1.7 fitting > > White cover caps > > Opening angle restraint Free flap 3.15 Cabinet height (mm) Flap weight (kg) Model D Model E Model F Model G 350 5.2-11.0 6.7-14.3 10.1-21.4 13.5-27.3 400 4.7-9.6 5.9-12.4 8.9-18.6 11.8-23.3 450 4.1-8.4 5.2-10.9 7.8-16.3 10.4-20.5 500 3.7-7.5 4.7-9.7 7.0-14.6 9.2-18.3 550 3.3-6.8 4.2-8.8 6.3-13.2 8.3-16.5 600 3.0-6.2 3.8-8.0 5.7-12.0 7.6-15.0 650 2.6-5.6 3.4-7.3 5.3-11.0 6.9-14.0 D 372.91.730 E 372.91.731 F 372.91.7 G 372.91.733 Supplied with: > > Free Flap 3.5 fitting > > White cover caps > > Integrated opening angle restraint Packing: 1 set 51
GRASS CATALOGUE / 2016 FREE UP TECHNICAl INFORMATION for free up Installation Front panel drilling T < 40 277 2 K 152 40 U CH D V1 V2 HH 54 Carcase drilling pattern 52
FRee UP FRee UP FlAP FIttInG CH Cabinet height (mm) D U HH T V1 V2 0-360 274.5 CH - HH - k 278 281 128 177 345-420 302.5 CH - HH - k 8 333 146 205 380-500 337.5 CH - HH - k 390 393 168 240 430-600 382.5 CH - HH - k 470 473 196 284 Cabinet height (mm) Internal height (mm) Front panel weight (kg) Model 3.0-5.7 o1us 372.33.700 0-360 280 4.8-9.3 o2us 372.33.701 8.7-16.5 o3us 372.33.702 2.4-4.8 P1US 372.33.710 345-420 308 4.1-8.0 P2US 372.33.711 7.4-14.0 P3US 372.33.712 11.0-19.6 P4US 372.33.713 2.0-3.8 Q1US 372.33.720 380-500 343 3.4-6.7 Q2US 372.33.721 6.3-11.8 Q3US 372.33.722 9.3-17.4 Q4US 372.33.723 1.6-3.3 R1US 372.33.730 430-600 388 2.6-5.5 R2US 372.33.731 5.0-9.7 R3US 372.33.7 7.4-14.6 R4US 372.33.733 Supplied with: > Free Up fi tting > White cover caps > Free Up crossbar to suit cabinet width 1,200 mm Note: order cross bar separately Free Up crossbar T Carcase thickness (mm) CW Cabinet width (mm) Length (mm) 600 474 372.33.692 900 774 372.33.694 16 1,200 1,074 372.33.696 1,800 1,674 372.33.698 CW 1800 CW CW - (2 x t) - 88 53
GRASS CATALOGUE / 2016 FREE SWING TECHNICAl INFORMATION for free swing Installation 40 273 2 370-800 ~ 305 ~ 211 100 Carcase drilling pattern Front panel drilling 54
FRee SWInG FRee SWInG FlAP FIttInG Cabinet height (mm) Front panel weight (kg) Model Note: order cross bar separately. Supplied with: > Free Swing fi tting > White cover caps 370 400 450 500 550 600 670 700 750 800 1.8 4.0 S1SW 372.34.700 3.4 6.5 S4SW 372.34.701 5.2 10.3 S7SW 372.34.702 1.8 3.9 S1SW 372.34.700 3.3 6.3 S4SW 372.34.701 5.0 10.0 S7SW 372.34.702 1.9 3.7 S1SW 372.34.700 3.2 6.1 S4SW 372.34.701 4.8 9.4 S7SW 372.34.702 1.9 3.5 S1SW 372.34.700 3.0 5.8 S4SW 372.34.701 4.5 8.9 S7SW 372.34.702 2.5 5.9 S2SW 372.34.710 5.0 10.0 S5SW 372.34.711 8.2 15.9 S8SW 372.34.712 2.5 5.6 S2SW 372.34.710 4.8 9.6 S5SW 372.34.711 7.8 15.2 S8SW 372.34.712 2.5 5.3 S2SW 372.34.710 4.7 9.3 S5SW 372.34.711 7.5 14.5 S8SW 372.34.712 2.5 4.8 S2SW 372.34.710 4.5 8.8 S5SW 372.34.711 7.0 13.5 S8SW 372.34.712 3.2 6.5 S3SW 372.34.720 5.7 11.3 S6SW 372.34.721 8.5 17.1 S9SW 372.34.722 3.1 6.3 S3SW 372.34.720 5.6 11.1 S6SW 372.34.721 8.4 16.7 S9SW 372.34.722 3.0 6.0 S3SW 372.34.720 5.4 10.7 S6SW 372.34.721 8.2 16.0 S9SW 372.34.722 2.9 5.7 S3SW 372.34.720 5.3 10.3 S6SW 372.34.721 8.0 15.3 S9SW 372.34.722 Free Swing crossbar T Carcase thickness (mm) CW Cabinet width (mm) Length (mm) 600 474 372.33.692 900 774 372.33.694 16 1,200 1,074 372.33.696 1,800 1,674 372.33.698 CW 1800 CW CW - (2 x t) - 88 55
GRASS CATALOGUE / 2016 FREE FOLD TECHNICAl INFORMATION for 2 piece bi-folding flap doors Front panel drilling Installation 25.5 T 270 288 U ß 25.5 CH V X A1 W 25 K X A1 X = CH - Y - S - (2 x K) + A1 261 Y = (Q x CH) 217 - R 185 - K 121 57 44 64 64 Note: use 3 hinges for flap 57 widths >900 mm Carcase drilling Y T 261 217 185 121 57 44 64 64 57 >270 U Y Ø 5x12 >270 T U 25 V W KH K Ø 5x12 V W KH 25 K X A1 56 B = A2-5.5 B min. = 7.0
Free Fold For 2 piece bi-folding flap doors ß ( º ) Q R (mm) S (mm) T (mm) U (mm) V (mm) W (mm) 480-530 ~107-96 1.1 426 8 100-37 100-155 203-186 8-370 520-590 ~107-93 1.1 466 347 106-23 112-184 213-190 347-401 580-650 ~108-95 1.2 589 377 119-40 126-197 227-207 375-430 650-730 ~107-94 1.2 664 409 124-38 147-224 238-215 411-470 710-790 ~108-95 1.2 736 439 136-46 161-233 250-219 439-500 770-840 ~108-95 1.0 644 467 146-43 179-223 267-200 466-527 840-910 ~108-98 1.2 882 501 154-70 195-248 272-231 502-559 910-970 ~107-98 1.1 865 533 160-78 214-246 282-225 536-588 960-1010 ~107-100 1.1 915 557 170-99 228-251 295-240 560-605 1000-1040 ~107-102 1.1 954 576 177-120 239-256 306-256 578-616 Cabinet height (mm) Front panel weight (kg) Model 2.6-4.9 C1FS 372.37.710 480-530 4.9-10.2 C3FS 372.37.712 9.3-15.9 C4FS 372.37.713 2.4-4.8 D1FS 372.37.720 520-590 4.8-9.0 D3FS 372.37.722 7.8-15.2 D4FS 372.37.723 2.1-4.0 E1FS 372.37.730 580-650 4.0-8.5 E3FS 372.37.7 6.8-12.5 E4FS 372.37.733 10.5-17.3 E5FS 372.37.734 3.7-7.4 F3FS 372.37.742 650-730 7.0-11.8 F4FS 372.37.743 10.2-17.2 F5FS 372.37.744 3.6-6.2 G3FS 372.37.752 710-790 6.1-10.8 G4FS 372.37.753 8.5-14.4 G5FS 372.37.754 770-840 5.1-9.8 H4FS 372.37.763 7.5-14.1 H5FS 372.37.764 840-910 4.7-8.9 I4FS 372.38.773 6.9-12.2 I5FS 372.37.774 910-970 4.7-8.0 J4FS 372.37.783 6.4-11.5 J5FS 372.37.784 960-1010 4.6-8.3 K4FS 372.37.793 6.5-10.7 K5FS 372.37.794 1000-1040 5.7-10.1 L5FS 372.37.799 Packing: 1 set Supplied with: > > Free Fold fitting > > White cover caps > > Connecting hinges (2 pieces supplied for all fittings suitable for front weight up to 10 kg, 3 pieces supplied for all fittings with front weight above 10 kg) 57
GRASS CATALOGUE / 2016 Free Fold For 2 piece bi-folding flap doors Connecting hinge Drilling pattern 49 Finger protection 14 76 14 30 To avoid injuries the hinge comes apart when fingers get trapped unintentionally in the gap of the flap > > Area of application: For use with Free Fold fitting For wooden flaps > > Features: With finger protection function > > Material: Zinc-alloy > > Adjustment facility: 3-way adjustment: ±2 mm side adjustment, -1 to +2 mm gap adjustment, ±1.5 mm depth adjustment Quantity of hinges required For door width (mm) No. of hinges Up to 600 2 Between 600-800 2-3 Over 800 3 Finish Nickel-plated 372.64.796 Note: Order fixing screws separately. opening Angle restraint > > Area of application: For use with Free Fold fitting > > Features: Restricts the opening angle to 90º for low level applications > > Material: Plastic Finish Grey 372.37.060 (2 pieces required per flap fitting set) 58
Maxi for mid sized one piece flaps Maxi > Compact, strong flap fitting with multiple application possibilities > Effortless flap opening of even heavy front panels weighing up to 20 kg > 3 different colours: Nickel, White and Black > Minimal space required inside the cabinet (max. 184 mm deep x 26 mm wide) > Push-to-open: Opens all the way with just a gentle push on the front* > Touch opening: A gentle push on the front panel opens it slightly, after which it is opened and closed by hand with multi-position stop* > Power assisted opening: Less manual force required to open wide and heavy front panels with handle > Extremely wide and heavy front panels with handle: With multi-position stop and optional soft closing** * In combination with Salice Push concealed hinges, held in closed position by magnetic door catch and counter plate at the front panel. **In combination with concealed hinges with or without automatic closing spring as well as component for soft close. 59
GRASS CATALOGUE / 2016 maxi maxi flap fittings For flaps made with wood or with aluminium frame push magnetic door catch for concealed fixing 40 0.5 1 9 Ø 11.5 40 0.5 0.8 Ø 11.5 Ø 10 Ø 10 Counterplate for knocking in Counterplate for glue fixing > > Suitable for: Use with Maxi Touch push-to-open or touch opening application > > Features: With magnet for holding in closed position > > Mounting: For mounting in drilled holes in cabinet base or with adapter Installation Push catch and counterplate for knock-in 356.06.501 Push catch and counterplate for glue fixing 356.06.502 cruciform adapter housing for push magnetic door catches 48 2.5 7 50 13.5 Model Finish Nickel-plated White Black A 373.69.512 373.69.742 373.69.342 B 373.69.412 373.69.744 373.69.344 C 373.69.712 373.69.746 373.69.346 D 373.69.312 373.69.748 373.69.348 Note: 2 Fittings are required for door widths over 600 mm maxi Soft-closing mechanism for use with front panels with handles > > Area of application: For screw fixing to cabinet top or base With positioning aid 356.06.530 4.5 With positioning aid Finish Nickel-plated 373.69.799 White 373.69.798 Black 373.69.398 60
maxi application for front panels with handles standard mounting for power assisted opening of flap Opening angle 90º Cabinet height (mm) Flap weight (kg) Model A Model B Model C Model D 300 2.7-5.1 5.0-8.5 8.0-12.0 9.0-15.0 400 2.1-3.5 4.5-6.7 5.8-11.2 7.2-13.5 500 1.6-2.6 3.5-5.5 4.5-8.8 6.0-11.0 600 1.3-2.2 2.7-4.3 3.9-7.7 4.8-8.5 700 1.2-2.0 2.5-3.7 3.2-6.4 4.2-7.6 800 2.4-3.4 3.0-5.4 3.5-6.7 900 2.7-5.2 3.0-6.0 1000 2.7-5.5 Mounting for extremely wide and heavy front panels Cabinet height (mm) Flap weight (kg) Model A Model B Model C Model D 300 3.0-5.3 5.1-10.2 9.1-15.8 11.9-20.8 400 2.3-4.0 3.8-7.6 6.9-11.9 8.9-15.6 500 1.8-3.2 3.1-6.1 5.5-9.6 7.2-12.5 600 1.5-2.7 2.6-5.1 4.6-7.9 6.0-10.4 700 1.3-2.2 2.1-4.2 3.8-6.6 4.9-8.7 800 1.1-2.0 1.9-3.9 3.4-5.9 4.4-7.8 900 1.0-1.8 1.7-3.4 3.0-5.2 3.9-6.9 1000 0.9-1.6 1.5-3.0 2.7-4.7 3.6-6.2 application for front panels without handles touch open mounting for opening the flap slightly Manual operation with mult-position stop Opening angle 90º Cabinet height (mm) Flap weight (kg) Model A Model B Model C Model D 300 2.0-3.5 3.3-6.7 6.0-10.3 7.8-13.6 400 1.5-2.6 2.5-5.0 5.5-7.8 5.8-10.2 500 1.2-2.1 2.0-4.0 3.6-6.3 4.7-8.2 600 1.0-1.8 1.7-3.3 3.0-5.2 3.9-6.8 700 0.9-1.4 1.4-2.7 2.5-4.3 3.2-5.7 800 0.7-1.3 1.2-2.6 2.2-3.9 2.9-5.1 900 0.7-1.2 1.1-2.2 2.0-3.4 2.6-4.5 1000 0.6-1.0 1.0-2.0 1.8-3.1 2.4-4.1 Note: Must be used with Salice Push hinges. Push-to-open mounting for automatic opening Opening angle 90º Cabinet height (mm) Flap weight (kg) Model A Model B Model C Model D 300 1.7-2.4 3.1-4.6 3.8-7.0 5.8-9.8 400 2.4-3.7 3.1-5.5 4.2-7.1 500 1.6-2.9 2.6-4.5 3.4-5.8 600 1.5-2.4 2.1-3.6 2.9-4.8 700 1.2-2.1 1.5-3.2 2.5-4.0 800 1.3-2.9 2.2-3.3 900 1.1-2.6 1.9-3.3 1000 1.6-3.0 Note: Must be used with Salice Push hinges. 61
GRASS CATALOGUE / 2016 Free flap H 1.5 complete sets for flaps made from wood or with aluminium frame Individual set for one-sided application Free flap H 1.5 accessories cover cap for load bearing capacity adjustment facility Colour Mounting Right 372.39.002 White Left 372.39.003 SW10 hex key Left hand or right hand mounting Colour Material Grey Plastic 235.79.301 Screw-on bracket for cabinet All plastic version Plastic with metal support arm Model Mounting Plastic support arm A B C D Metal support arm Right 372.39.800 372.28.800 Left 372.39.801 372.28.801 Right 372.39.810 372.28.810 Left 372.39.811 372.28.811 Right 372.39.820 372.28.820 Left 372.39.821 372.28.821 Right 372.39.830 372.28.830 Left 372.39.831 372.28.831 Note: Use two Free flap H 1.5 fittings from cabinet width of 600 mm and above. Colour Mounting Grey On both sides 372.39.017 Screw-on bracket for flap Colour Mounting Grey On both sides 372.39.015 Supplied with: > > 1 Lid stay with cover cap > > 1 Screw-on bracket for cabinet > > 1 Screw-on bracket for flap > > 1 Hex key, SW10, plastic > > 1 Set of installation instructions 62
Free flap H 1.5 application for front panels with handles standard mounting for power assisted opening of flap Opening angle 90º Cabinet height (mm) Flap weight (kg) Model A Model B Model D 275 2.8-3.8 3.5-6.0 5.8-10.5 300 2.2-3.4 3.3-5.7 5.2-9.0 350 2.1-2.9 2.7-4.9 4.8-8.0 400 1.6-2.3 2.3-4.6 4.3-7.9 450 1.3-2.2 2.0-3.8 3.8-6.3 500 1.2-2.0 1.7-3.4 3.4-6.0 550 1.2-1.9 1.7-3.0 3.0-5.1 600 0.9-1.6 1.6-3.0 3.0-4.7 application for front panels without handles touch open mounting for opening the flap slightly Manual operation with mult-position stop Opening angle 90º Cabinet height (mm) Flap weight (kg) Model B Model C Model D 350 2.4-4.2 3.4-5.2* 4.7-6.9* 400 1.5-3.2 3.1-4.9* 3.9-5.6* 450 1.5-2.6 2.6-4.2* 3.6-5.4* 500 1.4-2.4 2.4-3.6 3.4-5.0 550 1.3-2.1 1.9-3.2 2.6-4.6 600 1.3-1.9 1.8-3.1 *It is recommended to use a standard Salice Push Catch and a supplementary Salice Push Catch for these applications. Push-to-open mounting for automatic opening Opening angle 90º Cabinet Flap weight (kg) height (mm) Model B Model C Model D 350 1.7-2.5 2.1-3.2 3.0-4.0 400 1.3-1.9 1.9-3.0 2.8-4.0 450 1.1-1.5 1.5-2.6 2.2-3.2 500 1.4-2.4 2.0-2.9 550 1.3-2.2 1.8-2.8 600 1.3-1.7 1.5-2.5 Note: Please utilise a Salice magnetic Push Catch with all front panels without handles. 63
GRASS CATALOGUE / 2016 duo / duo forte the fitting with dual function > > Suitable for: Small one piece flaps > > Features: Adjusting the arms (overshear) turns the lid stay into a flap stay Less space required inside the cabinet Wear-resistant friction coupling with large adjusting range Holding power adjustment with SW4 Allen key ( 008.28.241) Stronger holding power = locking function = flap locks in any position (multi-position stop) Weaker holding power = braking function = lid stay closes softly/flap stay opens gently Minimum installation depth S 12 Min. 135 Min. 172 25 Duo Duo Forte Lateral space requirement/ side distance (S) for screw-on bracket Front adjustment facility Height adjustment* Side adjustment* Tilting angle adjustment* Holding power adjustment *Adjustment based on concealed hinges that have been used. Application Finishes - Black, Nickel-plated or White As lid stay As lid stay As flap As stay flap stay 64