Allen Electric Connector Sales, Inc. (AECS, Inc.)

Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom design cable assemblies and harnesses to any requirement, aircraft power saver receptacles which include the MS90362-3 aircraft power saver receptacle and its mate. Our government CAGE Code is 07BG6. Cable and Wire Harness Assembly MIL-DTL-38999 Series I, II, III MIL-DTL-26482 Series II MIL-DTL-83723 Series III MIL-DTL-5015 Series III How to make a Connector Part Number MIL-DTL-26500 Connector Accessories Aircraft Power Saver Connector Aircraft Power Saver Receptacle Cable and Wire Harness Assembly: Looking to outsource your cable and wire harness jobs? Custom wire cable and harness assemblies made or repaired to any requirement including cable assemblies, wire harnesses, patch cord cable assemblies, SMA coaxial assemblies, modular assemblies, flat ribbon harnesses, multi-leg cable assemblies, power and general signal harnesses, shielded and non-shielded cable assemblies, hybrid assemblies, RF coaxial harnesses, and digital databus cables. How to make a Connector Part Number: Not sure how to put a connector part number together? Just follow our handy guide designed to walk you through the process. MIL-DTL-38999 Series I, II, III: Our most popular connector series, Series I: MS27656, MS27466, MS27467, MS27468, MS27496, MS27505, Series II: MS27472, MS27497, MS27473, MS27484, MS27474, MS27499, MS27508, MS27513, Series III: D38999/20, D38999/24, D38999/26.

Contact Sizes: 22D, 20, &. MIL-DTL-83723 Series III: Bayonet or threaded coupling, rear release, crimp contacts intermates with MIL-DTL-26500: M83723/75, M83723/82, M83723/83, M83723/71, M83723/72, M83723/84, M83723/85, M83723/73, M83723/74, M83723/86, M83723/87, M83723/91, M83723/92, M83723/76, M83723/77, M83723/78, M83723/95, M83723/96, M83723/97, M83723/98; Contact Sizes: 20, &. MIL-DTL-5015 Series III: Circular connector, threaded coupling, rear release, crimp contact intermates with MIL-DTL-5015 solder, 5015 front release, 83723 Series II: MS3450, MS3451, MS3452, MS3454, MS3456, MS3459 D; Contact Sizes:,,8,4 & 0. MIL-DTL-26482 Series II: Bayonet coupling, rear release, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476; Contact Sizes: 20, & crimp contacts intermates with 26482 Series I solder, front release and 83723 Series I. MIL-DTL-26500: Circular connector bayonet or threaded coupling front release, crimp contact intermates with MIL-DTL-26500: MS24264, MS24265, MS24266; Contact Sizes: 20, &. Connector Accessories: Back-shells for all connectors listed above including M85049 series, dust caps for all connectors listed above including M83723 series, contacts of all sizes and insertion and extraction tools. Aircraft Power Saver Receptacles: MS90362-3 aircraft power saver receptacle and its mate; the aircraft ground power saver connector are proven to provide reliable external ground power for all types of commercial and military aircraft. Additionally, we can provide the following: Terminals - MS20659, MS25036, MS25274, M7928; Terminal Blocks - M83413, MS272, MS25226, MS18029, MS25083. Relays: Industrial Relays - MIL-R-5757 (2 Amperes), MIL-PRF-6106 (25, 50 Amperes), MS27709 (10 Amperes), MS27742 (25 Amperes), MIL- PRF-83536 (5, 10, 25 Amperes), MIL-PRF-83726 (Time Delay), MIL-PRF-883 (Sockets and Tracks). Speed, Position and Current Sensors: Automotive sensors, current sensors and Encoders. Pressure Transducers: General purpose and test measurement pressure transducers. Potentiometers: Custom precision potentiometers, Encoders and Trimmers. Switches: Basic switches, Toggle and Rocker, Limit and Enclosed, Sealed Environment, Keyswitches and Pushbuttons. CAGE Code 07BG6 A Woman Owned Small Business Government and Major Credit Cards accepted. You can send inquiries to: Voice (703) 425-3815 Fax (703) 425-3814 Email - aecs@aecsinc.com Copyright 2009 Allen Electric Connector Sales, Inc. All Rights Reserved.

MIL-DTL-5015 Series III The MIL-DTL-5015 Series III connectors provide aerospace performance and reliability for general purpose power inter-connection requirements. Originally a World War II solder connector, its revision since then has resulted in a 5015 series of widespread use in applications requiring gauges 0 to. There are 19 shell sizes from size 8 to 40, with over 159 approved insert arrangements per MIL-STD-51, incorporating 1 to 854 box mount, cable connecting and jam nut receptacles, and standard or self-locking plugs. The hard plastic socket interface features the chamfered conical entry that aids in the proper mating of contacts. The fluorosilicone interfacial seal has conical risers around each pin contact, that compress into the socket interface, assuring the seal of the mating surface. Various shell materials and finishes are available. GENERAL SPECIFICATIONS Shell Sizes: 19 (8 to 40) 159 insert arrangements with 1 to 85 contacts Contacts: Sizes,, 8, 4 & 0 gauge per MIL-C-39029 Polarization: Insert Rotation Environmental Fluorosilicone Elastomers Operating Temperature Range: -55 degrees C (-67 degrees F) to 200 degrees C (392 degrees F) Voltage Service Rating: 1500 VAC at Sea Level, 450 VAC at 50,000 ft, 200 VAC at 110,000 ft. Test Voltage: 1500 v. RMS, 60 Hz mated or unmated, 1000 v. (altitudes up to 50,000 feet) mated, 250 v. (altitudes up to 110,000 feet) unmated CONTACT INFORMATION Contact Size Current Rating Contact Retention Applicable Wire Sizes DC Test Amperes Axial Load Wire Gauge Insulation Sealing Range 13 25 lbs. 20-.053-.103 23 30 lbs. 14-.085-.158 8 46 50 lbs. 10-8.132-.255 4 80 60 lbs. 6-4.237-.370 0 150 75 lbs. 2-0.360-.550 Socket Contacts Pin Contacts Sealing Plugs Crimp Tools Positioner or Turret

Size Part Number Part Number S M39029/30-217 M39029/30-218 M39029/30-219 8 4 0 M39029/30-220 M39029/30-221 M39029/30-222 N/A M39029/29-2 M39029/29-213 M39029/29-214 M39029/29-215 M39029/29-2 Part Number MS27488- MS27488- MS27488- MS27488-8 MS27488-4 MS27488-0 Part Number M22520/1-02 M22520/1-02 M22520/1-02 M22520/23-02 M22520/23-04 M22520/23-05 Part Number MS27488- MS27488- MS27488- MS27488-8 MS27488-4 MS27488-0 MIL-DTL-5015 Insert Contacts, Service Rating & Clocking Positions MIL-DTL-5015 Insert Arrangements MS3450 Wall Mount Receptacle MS3451 Cable Connecting Receptacle MS3452 Box Mount Receptacle MS3454 Single Hole Mount Receptacle MS3456 Plug MS3459D Self Locking Plug For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you!

MIL-DTL-5015 Insert Contacts, Service Rating & Clocking Positions NORMAL POSITION - the centerline of the face view of the insert pattern is aligned with the shell key on the plug and keyway on the receptacle. Angle A on the above drawing would be at zero degrees. ALTERNATE POSITION - the centerline of the face view of the insert pattern is rotated in relationship to the shell key on the plug and keyway on the receptacle. Pin key inserts are rotated clockwise (CW). For example, a 14S-7 pin insert layout in the X position would have an angle A of 180 degrees. MIL-DTL-5015 INSERT CONTACTS, SERVICE RATING AND CLOCKING POSITIONS SHELL SIZE M83723 II INSERT ARRANGEMENTS 5015 III 5015 III M83723 II CONTACTS SERVICE RATING ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z 8 8S 8S-1 0801 1 A - - - - 10 10S 10S-2 1002 1 A - - - - 10SL 10SL- 1103 3 A - - - - 3 11 10SL 10SL- 1104 2 A - - - - 4 Insert rotated 100' CW in S S-1 1301 2 A shell Insert rotated 100' CW in S S-2 1302 2 A shell 13 S S-3 1303 2 A 70 145 215 290 REMARKS SERVICE RATING INST. CLASS K Made from S-3 Made from S-3

S S-4 1304 1 D - - - - -5 05 1 D - - - - 14S 14S-1 1501 3 A - - - - 15 14S 14S-2 1502 4 Inst. - 0 140 - SHELL SIZE M83723 II INSERT ARRANGEMENTS 5015 III 5015 III M83723 II CONTACTS SERVICE RATING ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z 14 14 14-3 1403 1 8 A - - - - 15 14S 14S-5 1505 5 Inst. - 110 - - 14S 14S-6 1506 6 Inst. - - - - 14S 14S-7 1507 3 A 90 180 270-14S 14S-9 1509 2 A 70 145 215 290 14S 14S- 10 14S 14S- 11 14S 14S- 14S 14S- 13 1510 4 Inst. 1511 4 Inst. 15 3 A 1513 3 A Insert rotated 100' CW in shell Insert rotated 100' CW in shell Insert rotated 100' CW in shell Insert rotated 100' CW in shell 17 S S-1 1701 7 A 80 - - 280-2 02 1 E - - - - SHELL SIZE M83723 II 5015 III 5015 III INSERT ARRANGEMENTS M83723 II CONTACTS SERVICE RATING ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z 17 S -3 1703 1 B - - - - S -4 1704 2 D 35 110 250 325-7 07 2 A 80 110 250 280 1 8 17 S S-8 1708 5 A - 170 265 - -9 09 2 A 35 110 250 325 2-10 10 3 A 90 180 270 - -11 11 2 A 35 110 250 325-1 4 A - - - - SHELL SIZE M83723 II -13 13 2 A 35 110 250 325 INSERT ARRANGEMENTS 5015 III 5015 III M83723 II CONTACTS SERVICE RATING ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z 18 18-1 1801 4 6 70 145 215 290 18 18-4 1804 4 D 35 110 250 325 18 18-5 1805 1 2 A(B,C, F,G) INST D 80 110 250 280 REMARKS Made from 14S-2 Made from 14S-2 Made from 14S-1 Made from 14S-1 REMARKS REMARKS

18 SHELL SIZE M83723 II 18 18 18-6 1806 1 4 D - - - - 18 18-7 1807 1 8 B - - - - 18 18-8 1808 7 A 70 - - 290 1 18 18-9 1809 5 INST 80 110 250 280 2 18 18-10 1810 4 A - 0 240-18 18-11 1811 5 A - 170 265-18 18-18 6 A 80 - - 280 18 18-13 1813 3 1 8 A 80 110 250 280 18 18-14 1814 1 1 4 A 80 110 250 280 18 18-15 1815 4 A - 0 240-18 18-18 1 C - - - - 18 18-17 1817 5 2 INST Insert rotated 100' CW in shell Insert rotated 100' CW in shell 18 18-18 1818 5 INST 2 18 18-19 1819 10 A - 0 240-18 18-22 1822 3 D 70 145 215 290 18 18-23 1823 4 6 18 18-24 1824 4 6 18 18-27 1827 1 2 INSERT ARRANGEMENTS 5015 III 5015 III M83723 II 18-28 1828 1 2 CONTACTS A INST A INST D SERVICE RATING Insert rotated 100' CW in shell Insert rotated 100' CW in shell Insert rotated 100' CW in shell ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z D Insert rotated 100' CW in shell 20 20-2 2002 1 0 D - - - - 20 20-4 2004 4 D 45 110 250-20 20-7 2007 4 4 20 20-8 2008 4 2 20 20-9 2009 1 7 8 8 Made from 18-5 D(A,B,G,H) A(all others) 80 110 250 280 INST 80 110 250 280 D(H) A (all others) 80 110 250 280 20 20-14 2014 3 A 80 110 250 280 2 20 20-15 2015 7 A 80 - - 280 Made from 18-9 Made from 18-9 Made from 18-1 Made from 18-1 Made from 18-5 REMARKS

20 SHELL SIZE M83723 II 22 20 20-20 7 2 A 80 110 250 280 20 20-17 2017 1 5 A 90 180 270-20 20-18 2018 6 3 A 35 110 250 325 20 20-21 2021 8 1 A 35 110 250 325 20 20-22 2022 3 3 8 A 80 110 250 280 20 20-24 2024 2 2 8 A 35 110 250 325 20 20-27 2027 14 A 35 110 250 325 20 20-29 2029 17 A 80 - - 280 20 20-32 2032 4 D(A,B,G,H) A(all others) 4 20 20-33 2033 11 A - - - - INSERT ARRANGEMENTS 5015 III 5015 III M83723 II CONTACTS SERVICE RATING Insert rotation 260' CW in shell ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z 22 22-2 2202 3 8 D 70 145 215 290 22 22-4 2204 2 2 8 A 35 110 250 325 22 22-5 2205 4 2 D 35 110 250 325 22 22-6 2206 1 2 8 D 80 110 250 280 22 22-7 2207 1 0 E - - - - 22 22-9 2209 3 E 80 110 250 280 22 22-10 2210 4 E 35 110 250 325 22 22-11 2211 2 B 35 110 250 325 22 22-22 3 D 80 110 250 280 2 8 22 22-14 2214 19 A 80 110 250 280 22 22-15 2215 1 5 1 22 22-17 2217 7 1 E (D) A(all others) 80 110 250 280 D (A) A A(all othrs) 80 110 250 280 22 22-18 2218 3 A (C,D,E) 80 110 250 280 5 D(all others 22 22-19 2219 14 A 80 110 250 280 22 22-21 2221 2 1 0 A 80 110 250 280 Made from 20-7 REMARKS

22 22 22 22 22 22-22 2222 4 8 A - 110 250-22 22-23 2223 1 7 22-27 22-30 22-32 22-36 SHELL SIZE M83723 II 24 24 2227 1 8 8 D(J) A(all others D(H) all others 35-250 - 80-250 280 2230 19 A Insert rotated 260' CW in shell 2232 2236 4 2 1 7 INSERT ARRANGEMENTS 5015 III 5015 III M83723 II D D(H) A(all others CONTACTS Insert rotated 260' CW in shell 90-270 - SERVICE RATING Made from 22-14 Made from 22-5 ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z 24 24-1 2401 1 1 0 D 80 110 250 280 24 24-2 2402 7 D 80 - - 280 24 24-4 2404 3 1 0 D 80 110 250 280 24 24-5 2405 A 80 110 250 280 24 24-6 2406 3 D(A,G,H) 5 A(all others 80 110 250 280 24 24-7 2407 14 2 A 80 110 250 280 24 24-10 2410 7 8 A 80 - - 280 24 24-11 2411 6 3 8 A 35 110 250 325 24 24-24 3 2 2 8 A 80 110 250 280 24 24-15 2415 A 24 24-24 3 1 3 24 24-20 2420 9 2 8 8 D(A,B,F) D(G) A(all others Insert rotated 100' CW from shell 80 110 250 280 D 80 110 250 280 24 24-21 2421 9 D 80 110 250 280 1 24 24-22 2422 4 8 D 45 110 250-24 24-24 2424 A Insert rotated 250' CW in shell 24 24-27 2427 7 E 80 - - 280 24 24-28 2428 24 INST 80 110 250 280 24-2480 23 INST 35 145 240 300 80 REMARKS Made from 24-5 Made from 24-5

SHELL SIZE M83723 II 28 28 5015 III 5015 III INSERT ARRANGEMENTS M83723 II 28 28-1 2801 2 4 1 2 28 28-2 2802 2 CONTACTS SERVICE RATING ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z 8 8 D(A & E) A(B,D,F,H) D (J) A(G & C) 80 110 250 280 D 35 110 250 325 28 28-3 2803 3 8 E 70 145 215 290 28 28-4 2804 28 28-5 2805 28 28-8 2808 3 4 2 2 1 2 2 1 9 4 8 4 E(G,P,S) D(A,B,E,F) D(C & D) 80 110 250 280 D 35 110 250 325 E(L & M) D(B) A(All others 80 110 250 280 28 28-9 2809 6 D 80 110 280 6 1 D(G) 2 A (A, F) 28 28-10 2810 80 110 250 280 2 A (B,E) 2 A (C,D) 28 28-11 2811 18 A 80 110 250 280 4 28 28-28 26 A 90 180 270 28 28-15 2815 35 A 80 110 250 280 28 28-28 20 A 80 110 250 280 28 28-17 2817 28 28-18 2818 28 28-19 2819 1 3 11 1 2 4 5 2 2 2 4 B (R) D (M,N,P) A(All others C (M) A (A, B) Inst(C,D,E,F) D(All others B (H, M) D (A, B) (All others) 80 110 250 280 70 145 215 290 80 110 250 280 28 28-20 2820 4 A 80 110 250 280 10 28 28-21 2821 37 A 80 110 250 280 28-22 2822 INSERT 3 3 4 CONTACTS D 70 145 215 290 ALTERNATE INSERT REMARKS

SHELL SIZE ARRANGEMENTS SERVICE M83723 II 32 32 SHELL SIZE M83723 II 5015 III 5015 III M83723 II 32 32-1 3201 RATING POSITIONS (DEGREES) QTY. SIZE W X Y Z 1 2 2 32 32-2 3202 2 3 4 32 32-3 3203 2 2 1 32 32-6 3206 2 3 2 4 32 32-7 3207 24 7 32 32-9 3209 2 32 32-13 3213 18 5 0 4 4 0 8 4 4 0 E (A) D (D,C) D (B, E) 80 110 250 280 E 70 145 215 290 D 80 110 350 280 A 80 110 250 280 Inst(A,B,H,J) A (All others) 80 5 235 280 D 80 110 250 280 D 80 110 250 280 32 32-15 3215 6 D 35 110 250 280 2 32 32-17 3217 4 4 D 45 110 250-32 32-19 3219 32 32-20 3220 1 2 2 2 3 2 0 8 4 E (A) D (D,C) D (B, E) A Insert rotated 260' CW in shell Insert rotated 260' CW in shell REMARKS Made from 32-1 Made from 32-6 32 32-22 3222 54 A 80 110 250 280 U=100',V=260' 32 32-63 3263 5 4 D - - - - 32-3273 46 A 36 - - - 73 INSERT ARRANGEMENTS 5015 III 5015 III M83723 II CONTACTS SERVICE RATING ALTERNATE INSERT POSITIONS (DEGREES) QTY. SIZE W X Y Z 36 36-3 3603 3 D 70 145 215 290 3 0 36 36-5 3605 4 0 A - 0 240-36 36-6 3606 4 4 A 35 110 250 325 2 0 36 36-7 3607 40 7 A 80 110 250 280 REMARKS

40 40 40-7 4007 2 2 2 2 2 2 A(W & X) A(U & V) A(P & Q) D(All others 80 110 250 280 40 40-9 4009 A 65 5 255 310 40 40-10 4010 A 65 5 255 310 40 40-11 4011 8 D 80 110 250 280 4 0 40 40-56 4056 85 A 72 144 2 288 40-62 4062 60 A 30 130 220 290 NOTE: This tabulation includes the MIL-C-83723 Series II connectors that are no longer recommended for retro-fit or new design. The difference between the MIL-C-5015 Series III and the MIL-C-83723 Series II is the MIL-C-5015 Series III has a captivated coupling ring on the plug. MIL-C-83723 Series II has a separate coupling ring retained when the backshell is attached. Otherwise, they are identical and intermateable. For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MIL-DTL-5015 Insert Arrangements Insert arrangements for all MIL-DTL-5015 Series III are the same. The insert arrangements are made by combining the shell size (first two numbers) with the insert arrangement number (last two numbers). For example, a MS3454L14-3P is a shell size 14 with a 3 insert for a 14-3 insert arrangement. Insert arrangements are shown in numerical order by shell size and number of contacts in each shell size.

For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc.All Rights Reserved.

MS3450 WALL MOUNT RECEPTACLE SIZE K +-.015 SIZE & CONTACTS L MAX SIZE 0, 4 & 8 CONTACTS M +.031 -.000 N +.000 -.062 R T, P CL-CL S +-.031 T +.010 -.005 CLASS L U, W CLASS K 8S.083 2.031 -.562.532.594.875.0.150 10S.083 2.051 -.562.656.719 1.000 0 150 10SL.083 2.051 -.562.656.719 1.000.0.150 S.083 2.031 -.562.782.8 1.094.0.150.083 2.5 -.750.782.8 1.094.0.150 14S.083 2.031 -.562.906.906 1.188.0.150 14.083 2.5 -.750.906.906 1.188.0.150 S.083 2.031 -.562 1.032.969 1.281.0.150.083 2.5 2.500.750 1.032.969 1.281.0.150 18.5 2.5 2.500.750 1.158 1.062 1.375.0.150 20.5 2.5 2.500.750 1.282 1.156 1.500.0.177 22.5 2.5 2.500.750 1.406 1.250 1.625.0.177 24.5 2.5 2.500.8 1.532 1.375 1.750.147.177 28.5 2.5 2.500.8 1.782 1.562 2.000.147.177 32.5 2.5 2.500.875 2.032 1.750 2.250.173.209 36.5 2.5 2.500.875 2.282 1.938 2.500.173.209

40.5 2.5 2.500.875 2.532 2.188 2.750.173.209 MIL-DTL-5015 Insert Contacts, Service Rating & Clocking Positions MIL-DTL-5015 Insert Arrangements For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MS3451 CABLE CONNECTING RECEPTACLE SIZE K +-.015 SIZE & CONTACTS L MAX SIZE 0, 4 & 8 CONTACTS M +-.010 N MAX R S +-.031 8S.083 2.031 -.562.532.504/.496.729 10S/10SL.083 2.031 -.562.656.629/.621.854 S.083 2.031 -.562.782.754/.746.974.083 2.5 -.750.782.754/.746.974 14S.083 2.031 -.562.906.879/.871 1.099 14.083 2.5 -.750.906.879/.871 1.099 S.083 2.031 -.562 1.032 1.005/.996 1.244.083 2.5 2.500.750 1.032 1.005/.996 1.244 18.5 2.5 2.500.750 1.156 1.131/1.1 1.349 20.5 2.5 2.500.750 1.282 1.256/1.246 1.474 22.5 2.5 2.500.750 1.406 1.381/1.371 1.599 24.5 2.5 2.500.8 1.532 1.506/1.496 1.715 28.5 2.5 2.500.8 1.782 1.756/1.746 1.974 32.5 2.5 2.500.875 2.032 2.007/1.996 2.224 36.5 2.5 2.500.875 2.282 2.257/2.248 2.474 40.5 2.5 2.500.875 2.532 2.511/2.496 2.724 MIL-DTL-5015 Insert Contacts, Service Rating & Clocking Positions MIL-DTL-5015 Insert Arrangements

MS3452 BOX MOUNT RECEPTACLE MS3452 PANEL CUTOUT SHELL SIZE A DIA. MAX. B DIA. +-.010 8S.130.562 10S, 10SL, S 14, 14S, S.130.688.103.8.130.938.130 1.062 18.130 1.188 20.130 1.3

22.130 1.438 24.157 1.562 28.157 1.8 32.183 2.062 36.183 2.3 40.183 2.562 NOTE: Per MS3452 REV. D, 2-15-95, Rear Grommet, "The insulation material shall be above, flush with or no more than.015" below the metal shell and all contacts shall be recessed below the insulation material." SIZE GG +-.0 K +-.015 L MAX SIZE SIZE & 0, 4 & 8 CONTACTS CONTACTS M +.031 -.000 N +.000 -.062 O (REF) MTG. HOLES R T, P CL-CL S +-.031 T +.010 -.005 8S.500.083 1.662 -.562.532.562.594.875.0 10S.625.083 1.662 -.562.656.688.719 1.000.0 10SL.625.083 1.662 -.562.656.688.719 1.000.0 S.750.083 1.662 -.562.782.8.8 1.094.0.750.083 1.662 -.750.782.8.8 1.094.0 14S.875.083 1.662 -.562.906.938.906 1.188.0 14.875.083 1.662 -.750.906.938.906 1.188.0 S 1.000.083 1.662 -.562 1.032 1.062.969 1.281.0 1.000.083 1.662 1.937.750 1.032 1.062.969 1.281.0 18 1.062.5 1.662 1.937.750 1.156 1.188 1.062 1.375.0 20 1.187.5 1.662 1.937.750 1.282 1.3 1.156 1.500.0 22 1.3.5 1.662 1.937.750 1.406 1.438 1.250 1.625.0 24 1.437.5 1.662 1.937.8 1.532 1.562 1.375 1.750.147 28 1.750.5 1.662 1.937.8 1.782 1.8 1.562 2.000.147 32 2.000.5 1.662 1.937.875 2.032 2.062 1.750 2.250.173 36 2.250.5 1.662 1.937.875 2.282 2.3 1.938 2.500.173 40 2.500.5 1.662 1.937.875 2.532 2.562 2.188 2.750.173 MIL-DTL-5015 Insert Contacts, Service Rating & Clocking Positions MIL-DTL-5015 Insert Arrangements

MS3454 SINGLE HOLE MOUNT RECEPTACLE MS3454 PANEL CUTOUT SHELL SIZE Z +-.005 O DIA. +.005 -.010 8S.323.505 10S, 10SL, S 14, 14S, S.385.640.448.765.510.890.573 1.015 18.635 1.140 20.698 1.265 22.760 1.390 24.823 1.515 28.948 1.765 32 1.073 2.015 36 1.198 2.265 40 1.323 2.515

SHELL SIZE A +-.005 B +-.010 C +-.005 D +-.005 & Contacts E MAX 0, 4 & 8 Contacts 8S 1.187.687 1.272.720 2.031-10S/10SL 1.3.8 1.397.720 2.031 - S 1.437.937 1.522.720 2.031-1.437.937 1.522.970 2.5-14S 1.562 1.5 1.647.720 2.031-14 1.562 1.5 1.647.970 2.5 - F Coupling Thread 1/2-28 5/8-24 3/4-20 3/4-20 7/8-20 7/8-20 G MAX.8.8.8.8.8.8 H Accessory Thread 1/2-20 5/8-24 3/4-20 3/4-20 7/8-20 7/8-20 S 1.687 1.250 1.772.720 2.031-1-20.8 1-20 1.687 1.250 1.772.970 2.5 2.500 1-20.8 1-20 18 1.8 1.375 1.897.970 2.5 2.500 1 1/8-18.8 20 1.937 1.500 2.022.970 2.5 2.500 1 1/4-18.8 22 2.156 1.625 2.241.970 2.5 2.500 1 3/8-18.8 24 2.281 1.750 2.366.970 2.5 2.500 1 1/2-18.8 28 2.531 2.000 2.6.970 2.5 2.500 1 3/4-18 UNS.8 1 1/-18 3/-18 1 5/-18 1 7/-18 1 3/4-18 UNS 32 2.781 2.375 2.866.970 2.5 2.500 2-18 UNS.8 2-18 36 3.301 2.625 3.1.970 2.5 2.500 2 1/4- UN.8 2 1/4- UN 40 3.281 2.875 3.366.970 2.5 2.500 2 1/2- UN.8 2 1/2 UN MIL-DTL-5015 Insert Contacts, Service Rating & Clocking Positions MIL-DTL-5015 Insert Arrangements

MS3456 PLUG SHELL SIZE SIZE & CONTACTS L MAX SIZE 0, 4 & 8 CONTACTS Q MAX 8S 2.031 -.844 10S 2.031 -.969 10SL 2.031 -.969 S 2.031-1.062 2.5-1.062 14S 2.031-1.156 14 2.5-1.156 S 2.031-1.250 2.5 2.500 1.250 18 2.5 2.500 1.344 20 2.5 2.500 1.469 22 2.5 2.500 1.594 24 2.5 2.500 1.719 28 2.5 2.500 1.969 32 2.5 2.500 2.219 36 2.5 2.500 2.469 40 2.5 2.500 2.719 MIL-DTL-5015 Insert Contacts, Service Rating & Clocking Positions MIL-DTL-5015 Insert Arrangements

MS3459D SELF LOCKING PLUG, less coupling indicator SHELL SIZE SIZE & CONTACTS L MAX SIZE 0, 4 & 8 CONTACTS Q MAX 8S 2.031 -.963 10S 2.031-1.088 10SL 2.031-1.088 S 2.031-1.213 2.5-1.213 14S 2.031-1.358 14 2.5-1.358 S 2.031-1.463 2.5 2.500 1.463 18 2.5 2.500 1.586 20 2.5 2.500 1.713 22 2.5 2.500 1.788 24 2.5 2.500 1.963 28 2.5 2.500 2.213 32 2.5 2.500 2.463 36 2.5 2.500 2.713

40 2.5 2.500 2.963 MIL-DTL-5015 Insert Contacts, Service Rating & Clocking Positions MIL-DTL-5015 Insert Arrangements For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MIL-DTL-83723 Series III The MIL-DTL-83723 Series III has both bayonet and threaded coupling configurations to meet both general purpose and swamp applications when excessive moisture, fluids, shock, and vibration exposure require a threaded connector. It is available in nine shell sizes with either square flange or jam nut receptacles, standard or RFI plugs in both bayonet and threaded versions. There are thirty insert arrangements using 2 to 61 contacts. 20,, and gauge contact sizes terminate wire gauges 24 through. The hard plastic socket interface features the chamfered conical entry that aids in the proper contact mating. The fluorosilicone interfacial seal has conical risers around each pin contact that compress into the socket interface to ensure the seal of the mating surface. Black anodize, electroless nickel, and chromate over cadmium finishes are available for the aluminum shells. GENERAL SPECIFICATIONS Environmental Fluorosilicone Elastomers Operating Temperature Range: -55 degrees C (-67 degrees F) to 200 degrees C (392 degrees F) Polarization: Locksmith Keying Voltage Service Rating: 1500 VAC at Sea Level, 450 VAC at 50,000 ft, 200 VAC at 110,000 ft. Contacts: Crimp type, Sizes 20,, and gauge per MIL-C-39029 Contact Current Rating: Size 20: 7.5 amps, Size : 13 amps, Size : 23 amps CONTACT INFORMATION Contact Size Socket Contacts Pin Contacts Crimp Tool Positioner or Turret Sealing Plugs M39029/5-118 M39029/4-113 M22520/1-01 M22520/1-02 MS27488- M39029/5-1 M39029/4-111 M22520/1-01 M22520/1-02 MS27488-20 M39029/5-115 M39029/4-110 M22520/1-01 M22520/1-02 MS27488-20

MIL-DTL-83723 Series III Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements MIL-DTL-83723 Panel Cut-Out Dimensions M83723/71 Receptacle, Bayonet, Square Flange, Socket Contacts Class A, G, R, W M83723/72 Receptacle, Bayonet, Square Flange, Pin Contacts Class A, G, R, W M83723/73 Receptacle, Bayonet, Jam Nut, Socket Contacts Class A, G, R, W M83723/74 Receptacle, Bayonet, Jam Nut, Pin Contacts Class A, G, R, W M83723/75 Plug, Bayonet, Socket Contacts Class A, G, R, W M83723/76 Plug, Bayonet, Pin Contacts Class A, G, R, W M83723/77 Plug, RFI, Bayonet, Socket Contacts Class G, R, W M83723/78 Plug, RIF, Bayonet, Pin Contacts Class G, R, W M83723/82 Receptacle, Threaded, Square Flange, Socket Contacts Class A, G, K, N, R, S, W M83723/83 Receptacle, Threaded, Square Flange, Pin Contacts Class A, G, K, N, R, S, W M83723/84 Receptacle, Threaded, Jam Nut, Socket Contacts Class A, G, K, N, R, S, W M83723/85 Receptacle, Threaded, Jam Nut, Pin Contacts Class A, G, K, N, R, S, W M83723/86 Plug, Threaded, Socket Contacts Class A, G, R, W M83723/87 Plug, Threaded, Pin Contacts Class A, G, R, W M83723/91 Plug, RFI, Threaded, Socket Contacts Class G, R, W M83723/92 Plug, RFI, Threaded, Pin Contacts Class G, R, W M83723/95 Plug, Self Locking, Threaded, 3 Teeth, Socket Contacts Class A, G, K, R, W M83723/96 Plug, Self Locking, Threaded, 3 Teeth, Pin Contacts Class A, G, K, R, W M83723/97 Plug, Self Locking, Threaded, 360 Degree Teeth, Socket Contacts, RFI Ground Class N & S Firewall M83723/98 Plug, Self Locking, Threaded, 360 Degree Teeth, Pin Contacts, RFI Ground Class N & S Firewall For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you!

MIL-DTL-83723 SERIES III POLARIZING LOCKSMITH KEYED POSITIONS (MACHINED IN THE SHELL) This drawing shows the receptacle engaging face; the plug would have the reverse (clockwise) from the master keyway. In the normal position (N) the centerline of the insert is the same as the master keyway of the shell. In the alternate positions ( 6, 7, 8, 9, and Y) the minor keyways are positioned counter clockwise when looking at the receptacle face. The degree of change is shown in the tables. CLOCKING POSITION SHELL SIZE 8 A B C D NORMAL 105 140 215 265 6 102 132 248 320 7 80 118 230 3 8 35 140 205 275 9 64 155 234 304 Y - - - - CLOCKING SHELL SIZE 10

POSITION A B C D NORMAL 105 140 215 265 6 102 132 248 320 7 80 118 230 3 8 35 140 205 275 9 64 155 234 304 Y 25 115 220 270 CLOCKING POSITION SHELL SIZE THRU 24 A B C D NORMAL 105 105 215 265 6 18 149 192 259 7 92 152 222 342 8 84 152 204 334 9 24 135 189 240 Y 98 152 268 338 For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MIL-DTL-83723 Series III Insert Arrangements Insert arrangement numbers are made by combining shell size (first two numbers) and the insert arrangement number (last two numbers). For example, a M83723/96R1407N is a shell size 14 with a 07 insert for a 1407 insert arrangement. Insert arrangements are shown in numerical order by shell size and number of contacts in each shell size.

MIL-DTL-83723 SERIES III PANEL CUT-OUT DIMENSIONS RECEPTACLES, SINGLE HOLE MOUNT, THREADED OR BAYONET M83723/73 M83723/74 M83723/84 M83723/85 SHELL SIZE EE +-.005 FF +-.005 8.805.635 10.730.760.917.947 14.980 1.010 1.105 1.135 18 1.229 1.260 20 1.354 1.510 22 1.479 1.510 24 1.604 1.635 RECEPTACLES, SQUARE FLANGE, THREADED OR BAYONET M83723/71 M83723/72 M83723/82 M83723/83

SHELL SIZE BACK MOUNT A +-.005 FRONT MOUNT B +-.005 INCH MM INCH MM INCH MM 8.620 15.75.447 11.35 10.748 19.00.572 14.53.913 23.19.760 19.30 14.980 24.89.822 20.88 1.107 28..948 24.08.599.589.724.714.817.807.911.901.974.964 18 1.209 30.71 1.072 27.23 1.067 1.057 20 1.337 33.96 1.192 30.28 1.1 1.151 22 1.452 36.88 1.322 33.58 1.255 1.245 24 1.577 40.06 1.442 36.63 1.380 1.370 15.21 14.96 18.39 18.14 20.75 20.50 23.14 22.89 24.74 24.49 27.10 26.85 29.49 29.24 31.88 31.62 35.05 34.30 For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814

M83723/71 Receptacle, Bayonet, Square Flange, Socket Contacts Class A, G, R, W M83723/72 Receptacle, Bayonet, Square Flange, Pin Contacts Class A, G, R, W SHELL SIZE L DIM K DIM A DIM ACCESSORY THREAD INCH MM INCH MM INCH MM 8 0.8 20.62 0.594 15.09 0.0 3.05.500-20 UNF-2A 10 0.937 23.80 0.719 18.26 0.0 3.05 1.031 26.19 0.8 20.62 0.0 3.05 14 1.5 28.58 0.906 23.01 0.0 3.05 1.250 31.75 0.969 24.61 0.0 3.05 18 1.343 34.11 1.062 26.97 0.0 3.05 20 1.437 36.50 1.156 29.36 0.0 3.05 22 1.562 39.67 1.250 31.75 0.0 3.05 24 1.703 43.26 1.375 34.93 0.149 3.78.625-24 - 2A.750-20 - 2A.875-20 - 2A 1.000-20 - 2A 1.062-18 - 2A 1.188-18 - 2A 1.3-18 - 2A 1.438-18 - 2A

MIL-DTL-83723 Series III Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements MIL-DTL-83723 Panel Cut-Out Dimensions For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

M83723/73 Receptacle, Bayonet, Jam Nut, Socket Contacts Class A, G, R, W M83723/74 Receptacle, Bayonet, Jam Nut, Pin Contacts Class A, G, R, W SHELL SIZE V MAX W MAX MOUNTING NUT HEX INCH MM INCH MM INCH MM INCH +.003 JJ MOUNTING FLAT ACCESSORY N B MAX MM THREAD THREAD INCH MM 8 0.979 24.87 1.068 27.13 0.8 20.62 0.593 15.06.500-20 UNF-2A.625-20 UN- 2A 0.137 3.48 10 1.104 28.04 1.192 30.28 0.937 23.80 0.718 18.24.625-25 -2A.750-20 -2A 0.137 3.48 1.291 32.79 1.380 35.05 1.3 28.52 0.905 22.99.750-20 -2A.9375-20 -2A 0.137 3.48 14 1.391 35.33 1.505 38.23 1.133 28.78 0.958 24.59.875-20 -2A 1.000-2A 0.137 3.48 1.5 38.51 1.630 41.40 1.3 33.32 1.093 27.76 1.000-20 -2A 1.5-20 -2A 0.137 3.48 18 1.541 41.68 1.756 44.60 1.438 36.53 1.217 30.91 1.062-18 -2A 1.250-18 -2A 0.137 3.48 20 1.766 44.86 1.860 47.24 1.562 39.67 1.342 34.09 1.188-18 -2A 1.375-18 -2A 0.137 3.48 22 1.954 49.63 2.086 52.98 1.688 42.88 1.467 37.26 1.3-18 -2A 1.500-18 -2A 0.8 4.27 24 2.079 42.81 2.0 54.85 1.8 46.02 1.592 40.44 1.438-18 -2A 1.625-18 -2A 0.8 4.27 MIL-DTL-83723 Series III Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements

MIL-DTL-83723 Panel Cut-Out Dimensions For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

M83723/75 Plug, Bayonet, Socket Contacts Class A, G, R, W M83723/76 Plug, Bayonet, Pin Contacts Class A, G, R, W M83723/77 Plug, RFI, Bayonet, Socket Contacts Class G, R, W M83723/78 Plug, RFI, Bayonet, Pin Contacts Class G, R, W SHELL SIZE INCH U DIA MM ACCESSORY THREAD 8.776 19.71.500-20 -2A 10.906 23.01.625-24 -2A 1.078 27.38.750-20 -2A

14 1.141 28.98.875-20 -2A 1.266 32.15 1.000-20 -2A 18 1.375 34.92 1.062-18 -2A 20 1.510 38.35 1.188-18 -2A 22 1.625 41.27 1.3-18 -2A 24 1.760 44.70 1.438-18 -2A MIL-DTL-83723 Series III Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements MIL-DTL-83723 Panel Cut-Out Dimensions For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

M83723/82 Receptacle, Threaded, Square Flange, Socket Contacts, Class A, G, K, N, R, S, W M83723/83 Receptacle, Threaded, Square Flange, Pin Contacts, Class A, G, K, N, R, S, W SHELL SIZE H DIM G DIM MOUNTING HOLES INCH MM INCH MM INCH MM 8 0.8 20.62 0.594 15.09 0.0 3.05 10 0.937 23.80 0.719 18.26 0.0 3.05 1.031 26.19 0.8 20.62 0.0 3.05 14 1.5 28.58 0.906 23.01 0.0 3.05 1.250 31.75 0.969 24.61 0.0 3.05 18 1.343 34.11 1.062 26.97 0.0 3.05 20 1.437 36.50 1.156 29.36 0.0 3.05 A THREAD.562-24 UNF- 2A.688-24 - 2A.875-20 - 2A.938-20 - 2A 1.062-18 -2A 1.188-18 -2A ACCESSORY THREAD.500-20 - 2A.625-24 - 2A.750-20 - 2A.875-20 - 2A 1.000-20 - 2A 1.062-18 - 2A 1.3-18 1.188-18 -

22 1.562 39.67 1.250 31.75 0.0 3.05 24 1.703 43.26 1.375 34.93 0.149 3.78 MIL-DTL-83723 Series III Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements MIL-DTL-83723 Panel Cut-Out Dimensions -2A 1.438-18 -2A 1.562-18 -2A 2A 1.3-18 - 2A 1.438-18 - 2A For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

M83723/84 Receptacle, Threaded, Jam Nut, Socket Contacts Class A, G, K, N, R, S, W M83723/85 Receptacle, Threaded, Jam Nut, Pin Contacts Class A, G, K, N, R, S, W SHELL SIZE JJ MOUNTING FLAT P MAX R MAX A M G MAX INCH MM INCH MM INCH THREAD THREAD +.003 MM INCH MM 8 0.980 24.89 1.078 27.38 0.593 15.06 10 1.104 28.04 1.192 30.28 0.718 18.24 1.291 32.79 1.380 35.05 0.905 22.99 14 1.391 35.33 1.561 39.33 0.968 24.59 1.5 38.51 1.641 41.68 1.093 27.76 18 1.641 41.68 1.766 44.86 1.217 30.91 20 1.766 44.86 1.954 49.63 1.342 34.09 22 1.954 49.63 2.078 52.78 1.467 37.25 24 2.079 52.81 2.182 55.42 1.592 40.44.562-24 - 2A.688-24 - 2A.875-20 - 2A.938-20 - 2A 1.062-18 - 2A 1.188-18 - 2A 1.3-18 - 2A 1.438-18 - 2A 1.562-18 - 2A MIL-DTL-83723 Series III Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements MIL-DTL-83723 Panel Cut-Out Dimensions ACCESSORY THREAD.625-20 UN-2A 0.137 3.48.500-20 UNF-2A.750-20 - 2A 0.137 3.48.625-24 -2A.9375-20 -2A 0.137 3.48.750-20 -2A 1.000-20 -2A 0.137 3.48.875-20 -2A 1.5-20 -2A 1.250-18 -2A 1.375-18 -2A 1.500-18 -2A 1.625-18 -2A 0.137 3.48 0.137 3.48 0.137 3.48 0.8 4.27 0.8 4.27 1.000-20 -2A 1.062-18 -2A 1.188-18 -2A 1.3-18 -2A 1.438-18 -2A

M83723/86 Plug, Threaded, Socket Contacts Class A, G, R, W M83723/87 Plug, Threaded, Pin Contacts Class A, G, R, W M83723/91 Plug, RFI, Threaded, Socket Contacts Class G, R, W M83723/92 Plug, RFI, Threaded, Pin Contacts Class G, R, W SHELL SIZE INCH W DIM MM A THREAD ACCESSORY THREAD 8.776 19.71.562-24 -2B.500-20 -2A 10.908 23.06.688-24 -2B.625-24 -2A 1.080 27.43.875-20 -2B.750-20 -2A 14 1.143 29.03.938-20 -2B.875-20 -2A 1.268 32.20 1.062-18 -2B 1.000-20 -2A 18 1.377 34.97 1.188-18 -2B 1.062-18 -2A 20 1.5 38.40 1.3-18 -2B 1.188-18 -2A 22 1.626 41.30 1.438-18 -2B 1.3-18 -2A 24 1.762 44.75 1.562-18 -2B 1.438-18 -2A MIL-DTL-83723 Series III Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements

M83723/95 Plug, Self Locking, Threaded, 3 Teeth, Socket Contacts Class A, G, K, R, W M83723/96 Plug, Self Locking, Threaded, 3 Teeth, Pin Contacts Class A, G, K, R, W SHELL SIZE A THREAD -2B W 8.5625-24.832 10.6875-24.959.875-20 1.097 14.9375-20 1.236 1.0625-18 1.360 18 1.1875-18 1.473 20 1.35-18 1.586 22 1.4375-18 1.703 24 1.5625-18 1.846 MIL-DTL-83723 Series III Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements

M83723/97 Plug, Self Locking, Threaded, 360 Degree Teeth, Socket Contacts, RFI Ground Class N & S Firewall M83723/98 Plug, Self Locking, Threaded, 360 Degree Teeth, Pin Contacts, RFI Ground Class N & S Firewall SHELL SIZE A THREAD -2B M 8.562-24.967 10.688-24 1.093.875-20 1.170 14.938-20 1.310 1.062-18 1.500 18 1.188-18 1.562 22 1.438-18 1.8 Polarizing Locksmith Keyed Positions MIL-DTL-83723 Insert Arrangements MIL-DTL-83723 Series III For pricing and availability, please fill out our RFQ form

If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MIL-DTL-26500 The MIL-DTL-26500 connectors are available in bayonet and threaded coupling configurations for both general purpose and swamp applications where the excessive moisture, shock, fluids, and vibration exposure require a threaded connector. The bayonet coupling version employs three ramps at a 0 degree angle, equally spaced to make the connector quicker to mate than other connectors. 20,, and gauge contact sizes terminate wire 24 through gauge. Environmental sealing is provide by an O-ring seal and displacement of the resilient interfaces when the connectors are mated, as well as redundant rear wiper seals around each wire. The fluorosilicone resilient materials provide superior protection when exposed to a wide variety of fluids. The non-conductive black anodize surface treatment on the aluminum shells creates an exceptionally hard finish that prolongs connector life and exceeds salt spray test requirements. GENERAL SPECIFICATIONS Shell Sizes: Nine, 28 insert arrangements with 2 to 61 contacts Contacts: Crimp type, Sizes 20,, and gauge per MIL-C-39029 Polarization: Locksmith Keying (MIL-STD-1554) Environmental Fluorosilicone Elastomers Operating Temperature Range: -55 degrees C (-67 degrees F) to 200 degrees C (392 degrees F) Voltage Service Rating: Sea Level 500 VAC, 450 VAC at 50,000 ft, 200 VAC at 110,000 ft. Test Voltage: 1500 v. RMS, 60 CPS mated or unmated, 1000 v. (altitudes up to 110,000 feet) mated, 250 v. (altitudes up to 110,000 feet) unmated Contact Current Rating: Size 20: 7.5 amps, Size : 13 amps, Size : 23 amps CONTACT INFORMATION Contact Size Socket Contacts Pin Contacts Crimp Tool Positioner or Turret Sealing Plugs M39029/32-254 M39029/31-235 M22520/1-01 M22520/1-02 MS27488- M39029/32-248 M39029/31-229 M22520/1-01 M22520/1-02 MS27488-20 M39029/32- M39029/31- M22520/1- M22520/1-02 MS27488-20

260 241 01 MIL-DTL-26500 Polarizing Locksmith Keyed Positions MIL-DTL-26500 Insert Arrangements MIL-DTL-26500 Panel Cut-Out Dimensions MS24264 Square Flange Threaded Receptacle MS24264 Square Flange Bayonet Receptacle MS24265 Jam Nut Threaded Receptacle MS24265 Jam Nut Bayonet Receptacle MS24266 Threaded Plug MS24266 Bayonet Plug For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MIL-DTL-26500 POLARIZING LOCKSMITH KEYED POSITIONS (MACHINED IN THE SHELL) This drawing shows the receptacle engaging face; the plug would have the reverse (clockwise) from the master keyway. In the normal position (N) the centerline of the insert is the same as the master keyway of the shell. In the alternate positions ( 6, 7, 8, 9, and Y) the minor keyways are positioned counter clockwise when looking at the receptacle face. The degree of change is shown in the tables. SHELL SIZE 8 A B C D NORMAL 105 140 215 265 6 102 132 248 320 7 80 118 230 3 8 35 140 205 275 9 64 155 234 304 Y - - - - SHELL SIZE 10 A B C D NORMAL 105 140 215 265 CLOCKING POSITION CLOCKING POSITION

6 102 132 248 320 7 80 118 230 3 8 35 140 205 275 9 64 155 234 304 Y 25 115 220 270 CLOCKING POSITION SHELL SIZE THRU 24 A B C D NORMAL 105 140 215 265 6 18 149 192 259 7 92 152 222 342 8 84 152 204 334 9 24 135 189 240 Y 98 152 268 338 For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MIL-DTL-26500 Insert Arrangements Insert arrangement numbers are made by combining shell size (first one or two numbers before the dash) and the insert arrangement number (last one or two numbers after the dash). For example, a MS24266R10T20P is a shell size 10 with a 20 insert for a 10-20 insert arrangement. Insert arrangements are shown in numerical order by shell size and number of contacts in each shell size. Please note the color code legend for the contact size for this series.

PANEL CUT-OUT DIMENSIONS FOR RECEPTACLES, THREADED OR BAYONET, JAM NUT OR SQUARE FLANGE SHELL SIZE L CL-CL MOUNTING HOLE J MIN. DIA. FRONT MOUNTING HOLE J MIN. DIA. BACK MOUNTING HOLE LL +.000 -.009 S MOUNTING HOLE +-.005 FLAT Z DIA. MOUNTING HOLE +-.005 8.594.447.620.5.605.635 10.719.572.748.5.730.760.8.760.913.5.917.947 14.906.822.980.5.980 1.010.969.948 1.107.5 1.105 1.135 18 1.062 1.072 1.209.5 1.225 1.260 20 1.156 1.192 1.337.5 1.350 1.385 22 1.250 1.322 1.452.5 1.475 1.510 24 1.375 1.442 1.577.154 1.600 1.635 For pricing and availability, please fill out our RFQ form

MS24264 SQUARE FLANGE THREADED RECEPTACLE SHELL SIZE L +-.005 CL-CL MOUNTING HOLE M +-.010 LL DIA. +.000 -.009 A THREAD CLASS 2A E MAX PANEL THICKNESS F THREAD CLASS 2A 8.594.8.5 9/-24.5 7/-28 10.719.937.5 11/-24.5 9/-24.8 1.031.5 7/8-20.5 3/4-20 14.906 1.5.5.969 1.250.5 18 1.062 1.343.5 20 1.156 1.437.5 22 1.250 1.562.5 15/-20.5 13/-20 1 1/-18.5 15/-20 1 3/-18.5 1 1/-18 1 5/-18.5 1 3/-18 1 7/-18.5 1 5/-18

24 1.375 1.703.154 1 9/-18.5 1 7/-18 MIL-DTL-26500 Polarizing Locksmith Keyed Positions MIL-DTL-26500 Insert Arrangements Panel Cut-Out Dimensions For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MS24264 SQUARE FLANGE BAYONET RECEPTACLE SHELL SIZE L CL-CL MOUNTING HOLE M +-.010 LL DIA. +.000 -.009 MAX PANEL THICKNESS F THREAD CLASS 2A 8.594.8.5.5 7/-28 10.719.937.5.5 9/-24.8 1.031.5.5 3/4-20 14.906 1.5.5.5.969 1.250.5.5 18 1.062 1.343.5.5 20 1.156 1.437.5.5 24 1.375 1.703.154.5 MIL-DTL-26500 Polarizing Locksmith Keyed Positions MIL-DTL-26500 Insert Arrangements Panel Cut-Out Dimensions 13/-20 15/-20 1 1/-18 1 3/-18 1 7/-18

MS24265 JAM NUT THREADED RECEPTACLE SHELL SIZE Y +-.003 MOUNTING FLAT U MAX HEX. MM +-.010 WW MAX. DIA. A THREAD CLASS 2A F MOUNTING THREAD CLASS 2A W +-.020 MAX PANEL F THREAD CLASS 2A 8.593.828.979 1.068 9/-24 5/8-20.117.5 7/-28 10.718.953 1.104 1.192 11/-24 3/4-20.117.5 9/-24.905 1.140 1.291 1.380 7/8-20 15/-20.117.5 3/4-20 14.968 1.250 1.391 1.505 15/-20 1-20.117.5 13/-20 1.093 1.329 1.5 1.630 1 1/-18 1 1/8-20.117.5 15/-20 18 1.217 1.455 1.641 1.740 1 3/-18 1 14/20.117.5 1 1/-18 20 1.342 1.642 1.766 1.860 1 5/-18 1 3/8-20.117.5 1 3/-18 22 1.467 1.705 1.954 2.040 1 7/-18 1 1/2-20.148.5 1 5/-18 24 1.592 1.892 2.079 2.0 1 9/-18 1 5/8-18.148.5 1 7/-18 MIL-DTL-26500 Polarizing Locksmith Keyed Positions MIL-DTL-26500 Insert Arrangements Panel Cut-Out Dimensions

MS24265 JAM NUT BAYONET RECEPTACLE SHELL SIZE Y +-.003 MOUNTING FLAT U MAX HEX. MM +-.010 WW MAX. DIA. V THREAD CLASS 2A W +-.020 MAX PANEL 8.593.828.979 1.068 5/8-20.117.5 10.718.953 1.104 1.192 11/-24.117.5 F THREAD CLASS 2A 7/-28 9/-24.905 1.140 1.291 1.380 7/8-20.117.5 3/4-20 14.968 1.250 1.391 1.505 1.093 1.329 1.5 1.630 18 1.217 1.455 1.641 1.740 20 1.342 1.642 1.766 1.860 15/-20 1 1/-18 1 3/-18 1 5/-18.117.5.117.5.117.5.117.5 13/-20 15/-20 1 1/-18 1 3/-18

22 1.467 1.705 1.954 2.040 1 7/-18.148.5 1 5/-18 24 1.592 1.892 2.079 2.0 1 9/-18.148.5 1 7/-18 MIL-DTL-26500 Polarizing Locksmith Keyed Positions MIL-DTL-26500 Insert Arrangements Panel Cut-Out Dimensions For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6 Copyright 2008 Allen Electric Connector Sales, Inc. All Rights Reserved.

MS24266 THREADED PLUG SHELL SIZE T MAX A COUPLING THREAD CLASS 2B F THREAD CLASS 2A 8.776 9/-24 7/-28 10.906 11/-24 9/-24 1.078 7/8-20 3/4-20 14 1.141 1.266 18 1.375 20 1.510 22 1.625 24 1.760 15/-20 1 1/-18-1 3/-18 1 5/-18 1 7/-18 1 9/-18 MIL-DTL-26500 Polarizing Locksmith Keyed Positions MIL-DTL-26500 Insert Arrangements 13/-20 15/-20 1 1/-18 1 3/-18 1 5/-18 1 7/-18

MS24266 BAYONET PLUG SHELL SIZE T MAX F THREAD CLASS 2A 8.776 7/-28 10.906 9/-24 1.078 3/4-20 14 1.141 13/-20

1.266 18 1.375 20 1.510 22 1.625 24 1.760 15/-20 1 1/-18 1 3/-18 1 5/-18 1 7/-18 MIL-DTL-26500 Polarizing Locksmith Keyed Positions MIL-DTL-26500 Insert Arrangements For pricing and availability, please fill out our RFQ form If you need any other information, please aecs@aecsinc.com phone (703) 425-3815 fax (703) 425-3814 We look forward to hearing from you! A Woman Owned Small Business, CAGE Code 07BG6

CONNECTOR ACCESSORIES Back-shells for all connectors listed including the M85049 series, please call for the latest pricing and we will quote you the back-shells to meet your connector requirements. Dust caps for all connectors listed including the M83723 series

Industrial Insertion, Extraction and Positioner tools Contacts of all sizes and materials such as Alumel and Chromel and special contacts M39029/59-366 MIL-DTL-26482 Series II Contacts and Tooling MIL-DTL-83723 Series III Contacts and Tooling MIL-DTL-5015 Series III Contacts and Tooling MIL-DTL-26500 Contacts and Tooling MIL-DTL-38999 Contacts, Tooling, Wire Sizes, Sealing Plugs

Background The cause of failure on an aircraft external power receptacle connector is the coupling method between the aircraft ground receptacle and the ground power plug. The physical engagement of the electrical contact pins on the aircraft fixed connector and the socket contacts on the ground supply free connector maintains the external power connector's coupling causing this failure. The sphincter or grabbing action of the high force socket contacts within the ground supply free connector causes premature excess wear on the pin contacts contained in the aircraft fixed connector. Additional failure is caused by the sheer weight of the ground supply free connector, which pulls down on the electrical interface causing arcing when the power is on. Replacement of either the aircraft fixed connector and/or the ground supply free connector is a significant loss to the airline and/or airport. The MS90362-3 aircraft power saver receptacle shown above mates with the aircraft external power receptacle connector shown below. Aircraft Ground Power Saver Connector CJ01GP6RA