LTG Air-Water Systems

AIR TECH SYSTEMS Technical Brchure LTG Air-Water Systems Inductin Units HFB Installatin in access flrs

The Innvatin Cmpany Inductin Units fr Installatin in Access Flrs Type HFB-N, HFB Applicatin The Inductin Units Type HFB are -pipe r 4-pipe units fr ventilating, heating and/r cling ccupied znes (perimeter znes) with varying lads and transient lad changes. The unit is ideal fr installatin in access flrs with a recmmended clearance f 00 t 300 mm. Since all the cmpnents are belw flr level the Inductin Units HFB may als be used with full height facade glazing. Inductin Unit fr installatin in access flrs, Type HFB -D (illustratin unit pen - special versin with sckets) Mde f Operatin The primary air (prcessed fresh air frm the main plant), is led thrugh a detachable nzzle bx with replaceable nzzles (nly in case f plastic nzzles). The primary air jets induce a larger secndary air flw f rm air in which is drawn acrss a flat heat exchanger. After a 90_ deflectin, the mixed air flw is expelled int the rm in a vertical directin clse t the facade via a ventilatin grille n the flr. In summer, this supply air mixes with the heated rm air in frnt f the facade, in winter with the descending cld air clse t the windw (mixed air flw clse t the facade). In the cling mde, the supply air, having passed the mixing air zne, passes thrugh the rm in by displacement. The unit may be used as an underflr cnvectr fr heating the rm whenever the ventilatin r air cnditining plant is islated. Versins The LTG inductin unit fr installatin in access flrs type HFB is available in tw versins: - HFB-Z with tw-rw heat exchanger fr high calric utput with high primary air vlume - HFB-D with three-rw heat exchanger fr high calric utput with lw primary air vlume Bth versins are available in identical lengths and grille widths. Advantages Flexible use - Thanks t the mdular design, the unit may be prgressively cnverted accrding t user requirements frm a pure flr cnvectr fr heating t mechanical ventilatin t a 4-pipe inductin unit including cling. Lw energy cnsumptin - Lw air plant perating csts due t peratin at lw initial pressure. - Large-surface heat exchanger ensures a high natural cnvectin capacity in the heating mde. High cmfrt - High cmfrt in the cling mde thanks t a cmbined mixed air/displacement air flw. - Excellent shielding f flr-t-ceiling glass surfaces during winter. Acustics - Very lw sund pwer level. - N crss-talk sund transmissin int adjacent rms via the access flr. Maintenance - Easy maintenance and cleaning thanks t gd access and ding withut mvable parts. Installatin - Separate installatin f A/C unit, facade and duble flr. - Fast/Easy retrfitting and cnversin due t mdular design. Inductin Unit fr installatin in access flrs, Type HFB with aluminium grille Tlerances - Fr the dimensins given in this brchure, the General Tlerances accrding t DIN 768-sg apply. Fr the utlet grille,the Special Tlerances stated in the drawing apply. - Straightness and Twist Tlerances accrding t DIN 765 Part 3. Finish - The surface finish is designed t meet the requirements fr applicatins in buildings - rm climate accrding t DIN 946 Part. Other requirements n request. E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 3

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB-D Dimensins cling water return cling water inlet X E 44 63 G adjustable +50 mm Facade side 75 H 63 I 6 X Tp view 4xDN40 Air utlet width B DN 00 Ø30 feet height adjustable Crss -sectin X -X heating water return heating water inlet 30 Ismetric picture C C/ F A xll0x0,5 Attentin! d nt use nzzle tube as supprt! Supply air Illustratin: Versin with aluminium grille Inductin unit type HFB- D Rm air Primary air Size A B C F 630 988 66 593 40 800 98 856 763 95 000 398 056 963 95 50 598 56 63 95 Versin: E H I G min stainless steel grille: aluminium rller grille: aluminium grille: 305 308 308 44 48 48 55 59 59 87 9 9 E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 4

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB-D Technical Specificatins Size 630 [m 3 /h] p [Pa] L A8 L wa Q P / t P Q k / t ) Q h / t 35 50 7 7 0 w k / p w w h / p w 60 50 6 3 0 8 8 80 00 80 00/. 00/.8 60 50 8 34 0 33 0 330 00 Q k Q P 70 0 35 50 8 0 00 0 45 50 4 30 5 3 0 50 45 50 6 3 5 6 6 60 50 80 50 8 34 7 3 0 30 70 80 50 33 39 7 36 360 70 00 50 3 37 33 34 340 330 00 50 33 39 33 39 4 380 330 Size 800 [m 3 /h] p [Pa] L A8 L wa Q P / t P Q k / t ) Q h / t 45 50 8 5 5 5 w k / p w w h / p w 80 50 6 3 7 38 3 380 70 5 0/.5 0/3 80 50 30 36 7 43 6 430 70 Q k Q P 50 50 45 50 3 9 5 3 9 30 50 60 50 4 30 0 34 0 340 00 60 50 5 3 0 39 4 390 00 00 50 9 35 33 40 5 400 330 00 50 3 37 33 46 8 460 330 0 50 3 38 40 43 6 430 400 0 50 34 40 40 48 9 480 400 ) Water supply temperature: 6_C, inductin air temperature befre entering the heat exchanger: 6_C, nn-cndensing peratin (inductin air temperature may vary frm ambient air temperature) ) Primary air temperature: 6_C, air inlet temperature: 6_C Water supply temperature 70_C, air inlet temperature: 0_C Acustical data fr plastic nzzles; aluminium nzzles: sund pwer level + 3 db - primary air flw rate ( 0%) p - static pressure f primary air L A8 - sund pressure level at a rm absrptin f 8 m Sabine L wa - sund pwer level 3 db(a) (with plastic nzzles) Q P - cling capacity primary air t P - temperature difference between ambient air and primary air Q k - secndary cling capacity (heat exchanger) - heating capacity Q h t w k w h p w - temperature difference between inductin air temperature befre entering the heat exchanger and water supply - heating capacity by natural cnvectin - standard water flw rate (cling) - standard water flw rate (heating) - water-side pressure lss E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 5

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB-D Technical Specificatins Size 000 [m 3 /h] p [Pa] L A8 L wa Q P / t P Q k / t ) Q h / t 60 50 8 0 40 4 w k / p w w h / p w 00 50 8 34 33 50 30 500 330 80 50/4 50/4.6 00 50 3 37 33 55 33 550 330 Q k Q P 400 00 60 50 4 30 0 47 8 470 00 80 50 6 3 7 46 7 460 70 80 50 9 35 7 5 3 50 70 0 50 30 36 40 53 3 530 400 0 50 33 39 40 58 35 580 400 40* 50 3 38 47 56 33 560 470 40* 50 35 4 47 60 36 600 470 Size 50 [m 3 /h] p [Pa] L A8 L wa Q P / t P Q k / t ) Q h / t 80 50 5 3 7 53 3 w k / p w w h / p w 0 50 30 36 40 6 38 60 400 345 80/5.8 80/7.5 0 50 3 38 40 67 4 670 400 Q k Q P 530 70 80 50 8 34 7 58 35 580 70 00 50 7 33 33 57 34 570 330 00 50 30 36 33 6 37 60 330 40* 50 3 37 47 68 4 680 470 40* 50 34 40 47 7 44 70 470 60* 50 35 40 53 73 45 730 530 60* 50 36 43 53 76 47 760 530 ) Water supply temperature: 6_C, inductin air temperature befre entering the heat exchanger: 6_C, nn-cndensing peratin (inductin air temperature may vary frm ambient air temperature) ) Primary air temperature: 6_C, air inlet temperature: 6_C Water supply temperature 70_C, air inlet temperature: 0_C Acustical data fr plastic nzzles; aluminium nzzles: sund pwer level + 3 db * fr acustic reasns, large flw rates will require primary air sckets - primary air flw rate ( 0%) p - static pressure f primary air L A8 - sund pressure level at a rm absrptin f 8 m Sabine L wa - sund pwer level 3 db(a) (with plastic nzzles) Q P - cling capacity primary air t P - temperature difference between ambient air and primary air Q k - secndary cling capacity (heat exchanger) - heating capacity Q h t w k w h p w - temperature difference between inductin air temperature befre entering the heat exchanger and water supply - heating capacity by natural cnvectin - standard water flw rate (cling) - standard water flw rate (heating) - water-side pressure lss E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 6

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB-D Selectin Inductin unit type HFB-D (4-pipe) cling cil Water-side pressure lss and cling capacity with different flw rates 0 0 Water -side pressure lss pw [kpa] 0 5 Size 50 Size 000 Size 800 Size 630 Cling capacity in % f the nminal capacity Qk 00 80 60 0.5 40 90 40 90 Flw rate w [kg/h] 40 0 40 60 80 00 0 40 Flw rate in % f the standard flw rate Inductin unit type HFB-D (4-pipe) heating cil Water-side pressure lss and heating capacity with different flw rates 5 0 Water -side pressure lss pw [kpa] 0 5 0.5 Size 50 Size 000 Size 800 Size 630 Heating capacity in % f the nminal capacity Qh 00 80 60 0. 40 90 40 90 Flw rate w [kg/h] 40 0 40 60 80 00 0 Flw rate in % f the standard flw rate E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 7

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB-Z Dimensins X X 4xDi=Ø40 DN 00 G adjustable +50 mm heating water return 44 9,5 E heating water inlet Tp view A Outlet width B Ø30 feet adjustable Fassadenseite H I 6 63 3 cling water return Insulating stripe n site cling water inlet Crss -sectin X -X 80 Ismetric Picture xll0x0,5 C C/ F Attentin! d nt use nzzle tube as supprt! Supply air Inductin unit type HFB- Z Rm air Primary air Illustratin: Versin with aluminium grille Size A B C F 630 988 66 593 40 800 98 856 763 95 000 398 056 963 95 50 598 56 63 95 Versin: E H I G min stainless steel grille: aluminium rller grille: aluminium grille: 305 308 308 44 48 48 55 59 59 87 9 9 E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 8

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB-Z Technical Specificatins Size 630 [m 3 /h] p [Pa] L A8 L wa Q P / t P Q k / t ) Q h / t 35 50 < <8 6 3 w k / p w w h / p w 60 50 4 30 0 9 0 00 65 00/3 00/ 60 50 7 33 0 5 50 00 Q k Q P 60 0 35 50 < <8 8 5 80 0 45 50 < 6 5 7 5 70 50 45 50 3 9 5 0 7 00 50 80 50 8 34 7 9 5 90 70 80 50 30 36 7 33 8 330 70 00 50 33 39 33 35 30 350 330 00 50 35 4 33 39 34 390 330 Size 800 [m 3 /h] p [Pa] L A8 L wa Q P / t P Q k / t ) Q h / t 45 50 <0 3 5 9 6 w k / p w w h / p w 80 50 3 9 7 33 8 330 70 0 0/5 0/3,3 80 50 7 33 7 38 3 380 70 Q k Q P 90 50 45 50 <0 5 5 3 9 30 50 60 50 <0 5 0 5 50 00 60 50 8 0 9 5 90 00 00 50 8 34 33 40 34 400 330 00 50 3 37 33 45 38 450 330 0 50 3 38 40 47 39 470 400 0 50 35 4 40 53 45 530 400 ) Water supply temperature: 6_C, inductin air temperature befre entering the heat exchanger: 6_C, nn-cndensing peratin (inductin air temperature may vary frm ambient air temperature) ) Primary air temperature: 6_C, air inlet temperature: 6_C Water supply temperature 70_C, air inlet temperature: 0_C Acustical data fr plastic nzzles; aluminium nzzles: sund pwer level + 3 db - primary air flw rate ( 0%) p - static pressure f primary air L A8 - sund pressure level at a rm absrptin f 8 m Sabine L wa - sund pwer level 3 db(a) (with plastic nzzles) Q P - cling capacity primary air t P - temperature difference between ambient air and primary air Q k - secndary cling capacity (heat exchanger) - heating capacity Q h t w k w h p w - temperature difference between inductin air temperature befre entering the heat exchanger and water supply - heating capacity by natural cnvectin - standard water flw rate (cling) - standard water flw rate (heating) - water-side pressure lss E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 9

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB-Z Technical Specificatins Size 000 [m 3 /h] p [Pa] L A8 L wa Q P / t P Q k / t ) Q h / t 60 50 7 0 34 8 w k / p w w h / p w 00 50 8 34 33 43 36 430 330 60 50/0 50/6 00 50 30 36 33 49 4 490 330 Q k Q P 340 00 60 50 3 9 0 39 33 390 00 80 50 3 9 7 38 3 380 70 80 50 6 3 7 44 37 440 70 0 50 3 38 40 47 39 470 400 0 50 34 40 40 54 45 540 400 40* 50 35 4 47 5 43 50 470 40* 50 37 43 47 58 49 580 470 Size 50 [m 3 /h] p [Pa] L A8 L wa Q P / t P Q k / t ) Q h / t 80 50 8 7 45 36 w k / p w w h / p w 0 50 8 34 40 56 47 560 400 35 80/6 80/0 0 50 3 37 40 63 53 630 400 Q k Q P 450 70 80 50 5 3 7 5 43 50 70 00 50 4 30 33 5 44 50 330 00 50 7 33 33 59 50 590 330 40* 50 3 38 47 60 5 600 470 40* 50 35 4 47 68 58 680 470 60* 50 35 4 53 65 55 650 530 60* 50 38 44 53 73 6 730 530 ) Water supply temperature: 6_C, inductin air temperature befre entering the heat exchanger: 6_C, nn-cndensing peratin (inductin air temperature may vary frm ambient air temperature) ) Primary air temperature: 6_C, air inlet temperature: 6_C Water supply temperature 70_C, air inlet temperature: 0_C Acustical data fr plastic nzzles; aluminium nzzles: sund pwer level + 3 db * bei grßer Luftmenge aus akustischen Gründen Primärluftstutzen erfrderlich - primary air flw rate ( 0%) p - static pressure f primary air L A8 - sund pressure level at a rm absrptin f 8 m Sabine L wa - sund pwer level 3 db(a) (with plastic nzzles) Q P - cling capacity primary air t P - temperature difference between ambient air and primary air Q k - secndary cling capacity (heat exchanger) - heating capacity Q h t w k w h p w - temperature difference between inductin air temperature befre entering the heat exchanger and water supply - heating capacity by natural cnvectin - standard water flw rate (cling) - standard water flw rate (heating) - water-side pressure lss E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 0

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB-Z Selectin Inductin unit type HFB-Z (4-pipe) cling cil Water-side pressure lss and cling capacity with different flw rates 0 0 Water-side pressure lss pw [kpa] 0 5 Size 50 Size 000 Size 800 Size 630 0.5 40 90 40 90 Flw rate w [kg/h] Cling capacity in % f the nminal capacity Qk 00 80 60 40 0 40 60 80 00 0 40 Flw rate in % f the standard flw rate Inductin unit type HFB-Z (4-pipe) heating cil Water-side pressure lss and heating capacity with different flw rates Water-side pressure lss pw [kpa] 5 0 5 0.5 Size 50 Size 000 Size 800 Size 630 0. 40 90 40 90 Flw rate w [kg/h] Heating capacity in % f the nminal capacity Qh 0 00 80 60 40 0 40 60 80 00 0 Flw rate in % f the standard flw rate E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins.

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB Installatin The cmpact design allws fr installatin f the unit between flr supprts. Height-adjustable feet ensure a precise alignment f the unit. Fr air cnnectin use ne f the tw cnnecting sckets n the unit s backside. The cntrl valve cmpartment and the water cnnectin are lcated n the unit s left side. Bushings fr water cnnectin hses are prvided n the unit s rear panel, n the left hand side. The ventilatin grille is designed t be flush-munted t the flr. It is ft traffic resistant withut the need fr any additinal crss members. Inductin Unit Type HFB - with ventilatin grille Installatin Sequence - Set the unit with insulating strips directly n the facade. - Height adjustment and exact psitining f the unit thrugh adjustable feet. - If required, use e.g. a PU adhesive t fix the unit feet in rder t avid accidental mvement. - Adjustment via damper blade and pressure measurement. - Set the feet fr flr panels and install the flr panels s that a direct cntact with the unit is ensured. - Cmplete electrical and water cnnectins. Water cnnectins must be flexible and strainless. Special Versins / Accessries - Cntrl valves ptinally with cntinuus, thermal r 3-psitin actuatr. - Insulated flexible hses with safe quick-release cnnectrs n the heat exchanger and integrated air-relief valves. - Slid, ft traffic resistant ventilatin grille nt requiring any additinal crss members, with blades parallel t the facade. Aluminum r stainless steel, inserted int the flr pan frm abve. The use f grilles f ther manufacturers requires LTG permissin in rder t ensure a prper functinf the entire system. - Primary air flw damper fr air flw balancing t btain a rati f up t abut :.5. Cntrl Water-side cntrl thrugh cntrl valves. Maintenance All cmpnents are lcated within a sheet steel pan and are easily accessible frm abve fr maintenance, inspectin and cleaning. Inductin Unit Type HFB - Installatin between flr supprts E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins.

Inductin Unit fr Installatin in Access Flrs Type HFB-N, HFB Installatin example The Innvatin Cmpany 3 (HFB -N 800) Spacer sheet e.g. 50 3 (HFB -N 800) 33,5 44 87,5 7,5 Installatin example: cntinuus grille n the facade Installatin in line In rder t prduce a cntinuus effect grille, black cated spacer sheets are fixed between the units. If the space between units is greater than 400 mm r if end pieces are used, additinal supprts will be required t prvide mre stability. If the space is 600 mm r greater, the use f an empty tray is recmmended fr stabilizatin. The LTG rller grilles may als be used t create cututs fr clumns r mitre edges. Grille lad capacity The 3 variants f ft traffic resistant LTG grilles ffer the fllwing static lad capacities: - Stainless steel grille 500 kg/m - Aluminium rller grille 600 kg/m - Aluminium linear grille 000 kg/m Other capacities n request LTG Stainless steel grille LTG aluminum rller grille LTG aluminum grille E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 3

The Innvatin Cmpany Inductin Unit fr Installatin in Access Flrs Type HFB Nmenclature HFB - Z - / 800 / 300 / 98 / R / E / S tw-rw heat exchanger three-rw heat exchanger Z D -pipe -unit 4-pipe -unit 4 size 630 800 000 50 width f grille 300 length f unit withut angular end piece fr distance sheet OR angular end piece R angular end pieces R grille stainless steel aluminum rller grille0 mm andized aluminum E AR AE cating black cating special clur S SO E Grenzstraße 7 D-70435 Stuttgart +49 (07) 80-80 Fax -70 Bdenind -E-TP (09/07) Internet: http://www.ltg-ag.de E-Mail: inf@ltg-ag.de Printed in Germany Frmer editins are invalid Subject t technical mdificatins. 4

Specificatin and Schedule f Prices Inductin Unit fr Installatin in False Flrs Type HFB Editin 0.7.008 / page Qty. Descriptin Inductin unit fr - and 4-pipe systems fr water-side cntrl by valves Type HFB (heating and cling) Inductin unit with a multi-rw heat exchanger with separate water circuits fr cling and heating (- and 4-pipe system), cnsisting f: - Husing fr free installatin in flr cavities r false flrs, cnsisting f a trsin-resistant pan f galvanized sheet steel, surface cated, sheet steel thickness:.5 mm, with reinfrced side edges, sheet thickness.5 mm t tlerate high static lads (sund insulatin index (RW) > 5 db), with separate valve husing and supprting prfile n the face t accept ventilatin grille, including ft traffic sund insulatin. - Ft traffic resistant ventilatin grille, made f aluminium ver the entire unit width, width 300 mm, serving as an inspectin pening. Thus, all cmpnents are easily accessible frm abve fr maintenance. - Supprting feet, with ft traffic insulatin, 4 pieces, height adjustable. - Bushing fr water hses exiting the unit tray in directin f rm with edge prtectin, ptimized fr high crss-talk attenuatin. - Heat exchanger with separate water circuits, cnsisting f smth mm cpper tubes with pressed-n aluminum fins, fr a high calric utput and high natural cnvectin. Operating pressure up t bar. Water-side cnnectin f quick release cuplings. - Cntrl valve husing n the unit's left hand side. - Air utlet duct clse t the facade fr better facade shielding. - Primary air nzzle bx with replaceable primary air plastic nzzles, designed fr inductin with a high level f perfrmance, a lw flw nise and a strng reflectin f the primary sund. Unit price in Ttal price in Exterir dimensins (aluminium linear grille): Width x height = 308 (44) mm x 9 mm (dimensins may vary depending n variant) Sizes: 630 800 000 50 Manufacturer: Series: Inductin units Type: HFB --, Grenzstraße 7, D-70435 Stuttgart, Tel.: +49 / 7 / 80-0, Fax.: +49 / 7 / 80-70 Ausgaben mit früherem Datum werden hiermit ungültig. Technische Änderungen vrbehalten. Frmer editins are invalid. Subject t technical mdificatins.

Specificatin and Schedule f Prices Inductin Unit fr Installatin in False Flrs Type HFB Editin 9..007 / page Qty. Descriptin Variants: Unit Price in Ttal price in Damper KLI integrated in the fresh air cnnectin. Mixed displacement air insert MQ. Spreading vanes t imprve indr air flw, integrated in the discharge sectin t prduce a cmbined mixed/displacement air flw at lw air speed, fr increased cling utput and reduced temperature layer frmatin in the ccupied zne. Stainless steel grille Aluminum - Rller grille Prepared fr installatin in line Differently frmed side panel t take a cnnecting sheet and give the grille a cntinuus lk. Accessries/special versin (ptinal, at extra charge): Flexible hse, xygen diffusin tight versin (Oxiblck, PE), with stainless steel braiding, quick release cupling n ne side, ther side ptinal, length: 500 mm, withut insulatin fr ht water up t supply temperatures f 50 C, perating pressure 0 bar Flexible hse, xygen diffusin tight versin (Oxiblck, PE), with stainless steel braiding, quick release cupling n ne side, ther side ptinal, length: 500 mm, with insulatin fr cld water r standard hse: Flexible hse, (EPDM-cre), with stainless steel braiding, quick release cupling n ne side, ther side ptinal, length: 500 mm, withut insulatin fr ht water Flexible hse, (EPDM-cre), with stainless steel braiding, quick release cupling n ne side, ther side ptinal, length: 500 mm, with insulatin fr cld water valves with thermelectrical actuatr valves with 3-psitin actuatr Plug-in cnnectins with / internal thread fr direct valve cnnectin -3-, Grenzstraße 7, D-70435 Stuttgart, Tel.: +49 / 7 / 80-0, Fax.: +49 / 7 / 80-70 Ausgaben mit früherem Datum werden hiermit ungültig. Technische Änderungen vrbehalten. Frmer editins are invalid. Subject t technical mdificatins.

Specificatin and Schedule f Prices Inductin Unit fr Installatin in False Flrs Type HFB Editin 9..007 / page 3 Technical Specificatin Primary air pressure Primary air flw rate Sund pwer L WA Sund pressure level at 8 m Sabine L pa [Pa] [m 3 /h] Cling mde Inductin air temperature Primary air temperature Water supply temperature Cling capacity [ C] [ C] [ C] Heating mde Inductin air temperature Water supply temperature Heating capacity [ C] [ C] Natural cnvectin, Grenzstraße 7, D-70435 Stuttgart, Tel.: +49 / 7 / 80-0, Fax.: +49 / 7 / 80-70 Ausgaben mit früherem Datum werden hiermit ungültig. Technische Änderungen vrbehalten. Frmer editins are invalid. Subject t technical mdificatins.

AIR TECH SYSTEMS Cmfrt Air Technlgy Air-Water Systems Air Diffusers Air Distributin Prcess Air Technlgy Fans Filtratin technlgy Humidificatin Technlgy Engineering Services Labratry Test / Experiment Field Measurement / Optimisatin Simulatin / Analysis R&D / Start-up Grenzstraße 7 70435 Stuttgart Germany Tel.: +49 7 80-0 Fax: +49 7 80-70 inf@ltg.de www.ltg.net LTG Incrprated 05 Crprate Drive, Suite E Spartanburg, SC 9303 USA Tel..: + 864 599-6340 Fax: + 864 599-6344 inf@ltg-inc.net www.ltg-inc.net HFB-eng-TP (08/5) 46-9 E Frmer editins are invalid Subject t technical mdificatins