Rotameters Rotameters

Rotameters Type 807 Rotameter - Polyamie omplete Assembly PV Socket Ens, EPDM Seals, Stanar Tube Stanar Float 98 807 622 ^ 98 807 60 ^ 0.22-2.20 98 807 62 ^ 98 807 6 ^ 0.44-4.40 2 98 807 624 ^ 98 807 62 ^.0-.0 2 98 807 625 ^ 98 807 6 ^ 2.60-26.0 2 98 807 626 ^ 98 807 64 ^ 4.40-44.0 2 98 807 627 ^ 98 807 65 ^ 6.60-66.0 2 2 98 807 628 ^ 98 807 66 ^ 8.80-88.0 2 2 98 807 629 ^ 98 807 67 ^.2-2.0 Type 807 Rotameter - Polyamie omplete Assembly PV Socket Ens, FPM Seals, Stanar Tube Stanar Float 98 807 68 ^ 98 807 646 ^ 0.22-2.20 98 807 69 ^ 98 807 647 ^ 0.44-4.40 2 98 807 640 ^ 98 807 648 ^.0-.0 2 98 807 64 ^ 98 807 649 ^ 2.60-26.0 2 98 807 642 ^ 98 807 650 ^ 4.40-44.0 2 98 807 64 ^ 98 807 65 ^ 6.60-66.0 2 2 98 807 644 ^ 98 807 652 ^ 8.80-88.0 2 2 98 807 645 ^ 98 807 65 ^.2-2.0 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.4

Type 807 Rotameter - Polysulphone omplete Assembly PV Socket Ens, EPDM Seals, Short Tube Stanar Float 8 98 807 550 ^ 98 807 576 ^ 0.0-0. 8 98 807 55 ^ 98 807 577 ^ 0.02-0.22 8 98 807 552 ^ 98 807 578 ^ 0.04-0.44 2 98 807 55 ^ 98 807 579 ^ 0.0-0. 2 98 807 554 ^ 98 807 580 ^ 0.06-0.66 2 98 807 555 ^ 98 807 58 ^ 0.08-0.88 98 807 556 ^ 98 807 582 ^ 0.06-0.66 98 807 557 ^ 98 807 58 ^ 0.-.2 98 807 558 ^ 98 807 584 ^ 0.22-2.20 98 807 559 ^ 98 807 585 ^ 0.44-4.40 Type 807 Rotameter - Polysulphone omplete Assembly PV Socket Ens, EPDM Seals, Stanar Tube Stanar Float 98 807 560 ^ 98 807 568 ^ 0.22-2.20 98 807 56 ^ 98 807 569 ^ 0.44-4.40 2 98 807 562 ^ 98 807 570 ^.0-.0 2 98 807 56 ^ 98 807 57 ^ 2.60-26.0 2 98 807 564 ^ 98 807 572 ^ 4.40-44.0 2 98 807 565 ^ 98 807 57 ^ 6.60-66.0 2 2 98 807 566 ^ 98 807 574 ^ 8.80-88.0 2 2 98 807 567 ^ 98 807 575 ^.2-2.0 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.5

Type 807 Rotameter - Polysulphone omplete Assembly PV Socket Ens, FPM Seals, Short Tube Stanar Float 8 98 807 602 ^ 98 807 62 ^ 0.0-0. 8 98 807 60 ^ 98 807 6 ^ 0.02-0.22 8 98 807 604 ^ 98 807 64 ^ 0.04-0.44 2 98 807 605 ^ 98 807 65 ^ 0.0-0. 2 98 807 606 ^ 98 807 66 ^ 0.06-0.66 2 98 807 607 ^ 98 807 67 ^ 0.08-0.88 98 807 608 ^ 98 807 68 ^ 0.06-0.66 98 807 609 ^ 98 807 69 ^ 0.-.2 98 807 60 ^ 98 807 620 ^ 0.22-2.20 98 807 6 ^ 98 807 62 ^ 0.44-4.40 Type 807 Rotameter - Polysulphone omplete Assembly PV Socket Ens, FPM Seals, Stanar Tube Stanar Float 98 807 586 ^ 98 807 594 ^ 0.22-2.20 98 807 587 ^ 98 807 595 ^ 0.44-4.40 2 98 807 588 ^ 98 807 596 ^.0-.0 2 98 807 589 ^ 98 807 597 ^ 2.60-26.0 2 98 807 590 ^ 98 807 598 ^ 4.40-44.0 2 98 807 59 ^ 98 807 599 ^ 6.60-66.0 2 2 98 807 592 ^ 98 807 600 ^ 8.80-88.0 2 2 98 807 59 ^ 98 807 60 ^.2-2.0 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.6

UPW Rotameter - Type 80 Float in PTFE, Fusion Spigots F [l/h] D 2 2 98 80 209 * 0.6-.0 59-82 2.6 7.9.9 2 98 80 20 * 0.4-.4 79-00 2.6 7.9.9 Special version PVDF-HP Float in PTFE With fusion spigots F Type [l/h] Taper tube in Polysulfone O- rings in FPM SK 70 2 68-204 0.-0.9 98 807 209 * SK 7 2 90-295 0.4-. 98 807 20 * SK 7 2 6-795 0.6-.5 98 807 202 * SK 20 50 568-227 2.5-0.0 98 807 20 * SK 2 50 909-409 4.0-8.0 98 807 204 * SK 0 6 000-842 4.4-6.0 98 807 205 * SK 6 000-909 4.4-40.0 98 807 206 * SK 40 75 848-64 8.0-50.0 98 807 207 * SK 4 75 227-664 0.0-72.0 98 807 208 * Type D 2 Rp SK 70 60 8 200 SK 7 60 8 200 SK 7 60 8 200 SK 20 8 466 5 2 SK 2 8 466 5 2 SK 0 0 472 5 2 SK 0 472 5 2 SK 40 22 495 5 2 2 SK 4 22 495 5 2 2 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.7

Type 80 Polysulphone UPW Tube Only FPM Seals See en of section for en connector options an pricing 2 700 25 574 * 0.6-.5 50 700 25 575 * 2.5-0.0 50 700 25 576 * 4.0-8.0 6 700 25 577 * 4.4-5.0 6 700 25 578 * 4.4-40.0 75 700 25 579 * 8.0-50.0 75 700 25 580 * 0.0-72.0 Type 806 Polyamie Tube Only Stanar Tube See en of section for en connector options an pricing Stanar Float 98 5 820 * 98 5 920 * 0.22-2.20 98 5 82 * 98 5 92 * 0.44-4.40 2 98 5 825 * 98 5 925 *.0-.0 2 98 5 826 * 98 5 926 * 2.60-26.0 2 98 5 828 * 98 5 928 * 4.40-44.0 2 98 5 829 * 98 5 929 * 6.60-66.0 2 2 98 5 80 98 5 90 8.80-88.0 2 2 98 5 8 98 5 9.2-2.0 Type 806 Polysulphone Tube Only Stanar Tube See en of section for en connector options an pricing Stanar Float 98 5 840 * 98 5 940 * 0.22-2.20 98 5 84 * 98 5 94 * 0.44-4.40 2 98 5 845 * 98 5 945 *.0-.0 2 98 5 846 * 98 5 946 * 2.60-26.0 2 98 5 848 * 98 5 948 * 4.40-44.0 2 98 5 849 * 98 5 949 * 6.60-66.0 2 2 98 5 850 98 5 950 8.80-88.0 2 2 98 5 85 98 5 95.2-2.0 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.9

Type 806 Polysulphone Tube Only Short Tube See en of section for en connector options an pricing Stanar Float 8 98 806 00 * 98 806 0 * 0.0-0. 8 98 806 0 * 98 806 * 0.02-0.22 8 98 806 02 * 98 806 2 * 0.04-0.44 2 98 806 0 * 98 806 * 0.0-0. 2 98 806 04 * 98 806 4 * 0.06-0.66 2 98 806 05 * 98 806 5 * 0.08-0.88 98 806 06 * 98 806 6 * 0.06-0.66 98 806 07 * 98 806 7 * 0.-.2 98 806 08 * 98 806 8 * 0.22-2.20 98 806 09 * 98 806 9 * 0.44-4.40 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.0

Rotameter omponent Parts Union Ens, PV IPS Socket Moel: With solvent cement socket ASTM PSI z D D 8 240 72 602 005 0.2 0.94 0.87 0.87 2 240 72 602 006 0.2.8.0 0.98 240 72 602 008 0.2.77.65.26 2 240 72 602 00 0.2 2.48 2.2.50 2 240 72 602 0 0.2.07 2.9.6 Union Ens, PV Metric Socket Moel: Solvent cement socket metric Suitable for unions, tank connectors an iaphragm valves Type 4 * for Aaptor Unions 2 5 02, 2 5 07, 2 55 02, 2 55 07 ol version PSI z D D 6 240 72 600 05 0.2 0.94 0.87 0.67 20 240 72 600 06 0.2.8.0 0.75 2 240 72 600 08 0.2.77.65 0.98 50 240 72 600 0 0.2 2.48 2.2.4 6 240 72 600 0.2.07 2.9.6 * 75 50 72 600 2 0.2.82.54.85 Union Ens, PP Socket Moel: Material: PP-H Fusion socket metric A PSI D D z 6 50 727 600 05 * 24 22 8 4 20 50 727 600 06 * 0 28 9 5 2 50 727 600 08 * 45 42 2 6 50 50 727 600 0 * 6 59 28 7 6 50 727 600 * 79 74 2 8 75 50 727 600 2 * 0 9 6 0 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.

Union En, PVDF Stanar Socket Moel: Material: PVDF Suitable for SYGEF Stanar Union Socket Fusion Suitable for Diaphragm Valve Type 4 Suitable for Vortex Sensor A PSI D D z 6 240 75 600 05 * 24 22 8 4 5 20 240 75 600 06 * 0 28 9 5 5 2 240 75 600 08 * 45 42 2 6 5 50 240 75 600 0 * 6 59 28 7 5 6 240 75 600 * 78 74 2 7 5 Union Ens, PV Threae Moel: Taper female threa NPT (ASTM) NPT PSI z D D 2 50 72 602 656 0.08.8.0 0.75 50 72 602 658 0.2.77.65 0.98 2 50 72 602 660 0.4 2.48 2.2.4 2 50 72 602 66 0.67.07 2.9.6 En onnectors PV Socket En onnectors PV (inch) 75 2 2 700 259 40 En onnectors PVDF Socket En onnectors PVDF (mm) 75 2 2 75 600 2 En onnectors PP Threae En onnectors PP (FNPT) 20 2 98 20 60 2 98 20 604 50 2 98 20 606 6 2 98 20 607 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.2

En onnectors PVDF Threae En onnectors PVDF (FNPT) 20 2 98 20 6 2 98 20 62 50 2 98 20 64 6 2 98 20 65 Union Nut, PV * for Aaptor unions PV-U / malleable iron only PSI D G Tr 6 240 72 690 005.8 0.8 4 20 240 72 690 006.69 0.9 2 240 72 690 008 2.28.02 2 50 240 72 690 00.27.4 2 4 6 240 72 690 0.94.50 2 4 Union Nut, PP Moel: Material: PP glass-fibre reinforce A Socket Fusion utt Fusion PSI G (R/Rp S Threa) D 6 6 50 /4 727 690 405 * 5 2 20 20 50 727 690 406 * 48 24 2 2 50 /2 727 690 408 * 65 28 50 50 50 2 /4 727 690 40 * 84 0 6 6 50 2 /4 727 690 4 * 9 Union Nut, PN 6, PVDF Stanar Moel: Material: PVDF 75, 90 an 0 with buttress shape threa Note: For the imensions 75-0 please see instructions for the installation A Socket Fusion utt Fusion PSI D G (R/Rp S Threa) 6 6 240 75 690 405 * 5 /4 2 20 20 240 75 690 406 * 4 22 2 2 240 75 690 408 * 60 /2 26 50 50 240 75 690 40 * 82 2 /4 6 6 240 75 690 4 * 00 2 /4 5 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.

Special Scale for Type 5 m/h [m³/h] orrespons to water scale [gal/h] 2 0.05-0.5.2-2.0 98 5 655 2 0. - 26.42-264.20 98 5 656 50 0. - 79.26-792.60 98 5 660 50 0.6-6 58.52-585.20 98 5 66 6-0 264.20-2642.00 98 5 66 6.5-5 96.0-96.00 98 5 664 75 2-20 528.40-5284.00 98 5 665 75-0 792.60-7926.00 98 5 666 Special Scale for Type 5 GPM orrespons to water scale [gal/h] 2 0.22-2.2.2-2.0 98 5 685 2 0.44-4.4 26.42-264.20 98 5 686 50.2 -.2 79.26-792.60 98 5 690 50 2.64-26.4 58.52-585.20 98 5 69 6 4.40-44.02 264.20-2642.00 98 5 69 6 6.60-66.04 96.0-96.00 98 5 694 75 8.80-88 528.40-5284.00 98 5 695 75.20-2 792.60-7926.00 98 5 696 Special Scale for Type 5 Air: 4.7 psi/0bar - Nm/h [m³/h] orrespons to water scale [gal/h] 2.5-4.2-2.0 98 50 655 2 2.5-29 26.42-264.20 98 50 656 50 9-08 79.26-792.60 98 50 660 50 7-74 58.52-585.20 98 50 66 6 29-0 264.20-2642.00 98 50 66 Special scale for short version Water Type [l/h] ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.4 SK 50 / 500 2.5-25.0 98 80 86 SK 5 / 50 5.0-50.0 98 80 87 SK 52 / 520 0.0-00.0 98 80 88 SK 60 / 600 8.0-80.0 98 80 89 SK 6 / 60 5.0-50.0 98 80 90 SK 62 / 620 20.0-200.0 98 80 9 SK 70 / 700 5.0-50.0 98 80 92 SK 7 / 70 0.0-00.0 98 80 9 SK 72 / 720 50.0-500.0 98 80 94 SK 7 / 70 00.0-000.0 98 80 95

Spare Part for Variable Area Flow Meter SK50-SK7/SK500-SK70 Short version float PVDF Without magnet Type SK 50 / 5 / 52 6 98 806 29 SK 60 / 6 / 62 20 98 806 220 SK 70 / 7 / 72 / 7 2 98 806 22 Spare Part for Variable Area Flow Meter SK50-SK7/SK500-SK70 Short Version PVDF Type SK 500 / 50 / 520 6 98 806 222 SK 600 / 60 / 620 20 98 806 22 SK 700 / 70 / 720 / 70 2 98 806 224 Spare Parts for Type 5 Insert PVDF (,4) [l/h] top (4) bottom () 50-500 2 98 5 970 98 5 977 00-000 2 98 5 970 98 5 977 00-000 50 2 98 5 972 98 5 979 600-6000 50 2 98 5 972 98 5 979 000-0000 6 2 98 5 97 98 5 980 500-5000 6 2 98 5 974 98 5 982 2000-20000 75 2 2 98 5 975 98 5 98 000-0000 75 2 2 98 5 975 98 5 98 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.5

Float PVDF (2) [l/h] Without magnet With magnet (bistabil) 50-500 2 98 5 455 98 5 470 00-000 2 98 5 455 98 5 470 00-000 50 2 98 5 457 98 5 47 600-6000 50 2 98 5 457 98 5 47 000-0000 6 2 98 5 457 98 5 47 500-5000 6 2 98 5 458 98 5 472 2000-20000 75 2 2 98 5 459 98 5 47 000-0000 75 2 2 98 5 459 98 5 47 Guiing ro PEEK (0) Moel: Only for 2" (6.6 66.04 GPM) an all 2½" rotameters [l/h] Guiing ro 500-5000 6 2 98 5 985 2000-20000 75 2 2 98 5 985 000-0000 75 2 2 98 5 985 Insert guiing ro PVDF (for 0) Moel: Only for 2" (6.6 66.04 GPM) an all 2½" rotameters [l/h] Insert guiing ro 500-5000 6 2 98 5 986 2000-20000 75 2 2 98 5 987 000-0000 75 2 2 98 5 987 Flow value inicator PS (8) Moel: For all imensions Type 5; see next page for etails Flow value inicator 2 98 5 990 40 4 98 5 990 50 2 98 5 990 6 2 98 5 990 75 2 2 98 5 990 O-rings (7) EPDM FPM 2 748 40 008 * 749 40 008 * 40 4 748 40 009 * 749 40 009 * 50 2 748 40 00 * 749 40 00 * 6 2 748 40 0 * 749 40 0 * 75 2 2 748 40 04 * 749 40 04 * ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.6

Accessories imit switch, short version Type Maximum Minimum SK500-70 GK 0 98 80 878 SK500-70 GK 04 98 80 879 Accessories imit contacts GK0/GK For type 5 Moel: For all imensions Type 5; see next page for etails Type GK0 (min.) 98 5 960 GK (max.) 98 5 96 ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.7

imit contacts Variable area flow meters from George Fischer are equippe with two ovetail shafts. For external electrical monitoring, these can be use for fitting magnetically actuate limit contacts. Function of the limit contact (GK) The limit contact serves to monitor externally the limite flow values an can be ajuste to any flow value on the corresponing scale. The magnet built into the float closes or opens a ree contact in the limit contact. This is a bistable switching function because the switching status remains when the float is taken from the contact. Note:When subsequently mounting limit contacts, min that you have to replace the stanar float with a magnetic float. The limit contacts GK0/ GK are only suitable for the VAFM type 5/ 50 as well as the short version of the existing range. The same contact type can not be use for monitoring both the min. an max. levels. (GK 0min / GK max) Technical ata to contacts onnection: Stanar plug DIN 40050 ontact fitte: Ree contact Moe of protection: IP 65 Max. voltage: 20 V Max. continuous current: 0.2 A Peak switch-on current: 0.5 A For use with inuctive loas, use a relay to protect the contacts Assembly instructions.replace the float with a magnetic float. 2.Position the limit contact on the ovetail shaft of the VAFM..Tighten fastening screw. Moe of operation of contacts Position of float in relation to limit contacts: Top ottom max. contact (GK) close open min. contact (GK0) open close The contacts remain in these positions, even if the float leaves the contact concerne. When the float moves back to the esire position, the corresponing contact is eactivate. ^ = 40% Restock harge * = Non-ancelable/Non-Returnable 4.8