Simply fresh water From 30 to 300 litres per hour
Aqua-Base reliability and service SLCE presents Aqua-Base, a range of watermakers designed especially for the world of pleasure-boating. Aqua-Base design and quality guarantees comfort, ease of use and exceptional durability. Aqua-Base simplicity Watermakers supplied either in a frame or in kit form for fitting into any configuration. Complete fitting kit. Extremely simple to operate and to install. Easy to operate control panel. Simplified maintenance. World-wide technical assistance and after-sales service network Aqua-Base reliability Uncompromising and exacting design standards Secure and guaranteed performance Top quality materials and components (high pressure CAT pump, frame made of stainless steel ) Exclusive device for continuous checking of salinity with automatic rejection The mastery of two desalination technologies Conventional Aqua-Base high pressure pump solutions. Aqua-Base low energy consumption solutions: patented pressure amplifying and energy recovery device SLCE gives you the benefit of its recognised experience in reserve osmosis desalination. Eco range: Energy Recovery ESB and ESW models In the technology of energy recovery, the high-pressure pump is replaced by a system of hydraulic amplification fed by a unique lowpressure pump. The Eco range is fully based on this concept, developed, tested and patented by SLCE. ESB and ESW advantages Very low electricity consumption. No adjustments necessary (operates entirely automatically). Incredibly silent and vibration-free operation (no high pressure pump). Easier installation (connections are made using low pressure tubing and the machine can be fitted in any position). Simplified maintenance (no need to change high pressure pump oil) Remote control: Integrates the operating and checking functions of the machine Automatic Flushing: Allows automatic fresh water flush of the membranes Sand Filter: Improves the primary filtration of the water and prolongs pre-filter life
The Aqua-Base ranges have been designed by SLCE to meet your need for fresh water with the same concern for reliability and ease of use as the other SLCE professional ranges. Aqua-Base X Ty from 30 to 90 l/h Yachting Very compact watermakers specifically designed for small boats where available energy and space are limited. Specifications Battery powered or generator Low pressure seawater feed pump High pressure CAT pump High rejection rate membranes 5 Micron filter High pressure safety switch Pressure regulation valve High pressure gauges Salinometer and automatic waste valve Remote control Automatic flushing Separation kit X X in a frame X X with separation option 690 690 322 300 214 336 190 215 330 480 480 Capacity Model Voltage Battery Single phase Three phase Electricity Consumption Weight XD121 12 V - - 31 A 34 kg 30 l/h XD241 24 V - - 25 A 36 kg XA221-230 or 115 V - 1 kw 38 kg 50 l/h XD122 12 V - - 31 A 40 kg XD242 24 V - - 25 A 42 kg 60 l/h XA222-230 or 115 V - 1 kw 44 kg 90 l/h XA223-230 or 115 V - 1 kw 50 kg Rated performances +/- 10% using standard seawater, with 35 g/l salinity and temperature at 25 C.
Very easy to use and to install, Aqua-base watermakers are delivered complete with a technical handbook for installation and maintenance. Aqua-Base Y Ty from 60 to 300 l/h Yacht Charter Professional Boat Heavy-duty design watermakers recommended for intensive users. Specifications Tri-phase or single phase electricity feed Low pressure seawater feed pump High pressure CAT pump High rejection rate membranes 5 & 20 Micron filters High and low pressure safety switches Pressure regulation valve High and low pressure gauges Salinometer and automatic waste valve Hour meter Flow meter Remote control Automatic flushing Sand filter YC Y in a frame YK Y in kit form 1165 365 (YC1 to 4) 435 (YC5) 450 (YC1 to 4) 500 (YC5) 560 Please contact us for exact dimensions Capacity 60 l/h 120 l/h 180 l/h 240 l/h 300 l/h Model Voltage Battery Single phase Three phase Electricity Consumption Weight YC1-61 kg 230 or 115 V 400 ou 220 V 1,5 kw YK1-52 kg YC2-69 kg 230 or 115 V 400 ou 220 V 1,5 kw YK2-60 kg YC3-77 kg 230 or 115 V 400 ou 220 V 2 kw YK3-68 kg YC4-85 kg 230 or 115 V 400 ou 220 V 2 kw YK4-76 kg YC5-95 kg 230 V 400 ou 220 V 3 kw YK5-86 kg Rated performances +/- 10% using standard seawater, with 35 g/l salinity and temperature at 25 C. Other voltages on request.
Aqua-Base Eco: Energy Recovery Ty from 30 to 90 l/h Low energy consumption Energy recovery watermakers designed for boats where energy available is very limited. Only 12 Amps at 12 Volts to produce 30 litres/hour Two versions are available: - ESB: Basic manual version. - ESW: Automatic version, includes automatic salinity control, and automatic fresh water flush. Specifications Low-pressure seawater feed pump Desalination module 5 Micron filter Remote control (ESW) Fitting kit ESB/ESW 30 to 60 l/h ESB/ESW 90 l/h 380 500 200 200 670 670 Capacity 30 l/h 60 l/h 90 l/h Model Battery Voltage Single phase Electricity Consumption Weight ESB/ESW301 12 V - 12 A 41 kg ESB/ESW302 24 V - 6 A 41 kg ESB/ESW601 12 V - 25 A 49 kg ESB/ESW602 24 V - 12,5 A 49 kg ESB/ESW901 12 V - 34 A 63 kg ESB/ESW902 24 V - 17 A 63 kg ESB/ESW903-230 V 750 W 65 kg Rated performances +/- 10% using standard seawater, with 35 g/l salinity and temperature at 25 C.
149, Rue Salvador Dali ZA de Kergouaran CS 8002 CAUDAN 56607 LANESTER Cedex France tel. fax e-mail internet +33(0)297 838 888 +33(0)297 838 333 slce@slce.net www.aquabase.net Your contact Aqua-Base is a trademark of SLCE Specifications are subject to alteration without prior notice - July 2010