EN-DWP1.1 DIESEL DRIVEN PUMPS DWP SERIES GENERAL CATALOGUE
GENERAC FACTORY PUMP RANGE S Series Dry vacuum assisted pumps continuous hours without maintenance Models from to 1 Heavy duty silence-proof canopy Bunded tank base 1-1 rpm, water cooled engine Page - GENERAC MOBILE PRODUCTS SRL - ITALY GENERAC POWER SYSTEMS, INC. - USA A LEADING ITALIAN COMPANY SINCE 1. Since 1, we have dedicated ourselves to the production of mobile lighting towers. This focus has allowed us to develop innovative products with high performance, versatility and reliability. In 1 Tower Light was acquired by Generac Power Systems, Inc., the leading American manufacturer of commercial, industrial and portable power generators. This acquisition allowed Tower Light to take a new step forward the development of new innovative products, as like engine driven pumps and power generators. On March 1 Tower Light Srl has changed its name into Generac Mobile Products srl. We are a company with ISO 1 certification and we have established ourselves as the dominant player in the European market, with a worldwide presence and a continuous growth throughout the years. OW/OA Series Dry vacuum assisted pumps continuous hours without maintenance Models from to 1 Open set version Control panel easy to be used 1-1 rpm, water or air cooled engine Page - SP Series Self priming pumps Models from to 1 Open set version on skid base Simple to be used and handled 1- rpm, air cooled engine Page - GENERACMOBILEPRODUCTS.COM
HIGH EFFICIENCY PUMPS DRY VACUUM TECHNOLOGY DRY VACUUM PUMPS The Generac S, OA and OW lines of portable engine driven pumps are purposely built with a m /h high performance dry vacuum style pump that guarantees rapid selfpriming with minimal operating expense. Continual performance can be attributed to the diaphragm vacuum pump s automatic priming even when loaded with significant air intake. These lines can be used in different range of applications: construction and mine sites dewatering, well point, sewage and by-pass are just a few of the many applications in which this impressive line of pumps can be used. 1 1 Dry vacuum pump Exhaust Central lifting eye Non return valve Outlet manifold Control panel side Air/water separator Water inlet coupling Pump body and impeller Battery 1 1 Forklift pockets 1 Bunded tank 1 Drain system valve Passive drainage 1 1 1 1 1 Additional dry vacuum pump (on request) Active drainage SELF-PRIMING PUMPS The range of SP self-priming pumps are built for pumping water with solids holdup, containing sand and mud. The special design makes these pumps suitable for different applications, used at contractor sites, civil service and industry where unclean liquid pumping and water displacement necessary. The open impeller has wide passages for control solids, the standard version is in cast iron type spheroidal with high wear resistance. The standard models are built on skid base; on request is available on an off-road trailer. Active drainage by well point system Hydraulic by-pass Hydraulic big-flow by-pass DRY VACUUM PUMP FEATURES: Carter in high resistance aluminum Kinematics motion in carbon stainless steel Diaphragm and Viton valves that allow to use the pump for. hours without any type of maintenance/substitution Double bearing and roll cage Volute in cast iron Oil lubrication Max standard flow: m /h Diaphragm pump It doesn t require re-fill of water and oil Possibility to fit a second dry vacuum pump to increase the max vacuum flow (up to m /h) GENERACMOBILEPRODUCTS.COM
S Series SILENCED VACUUM-ASSISTED PUMPS FROM TO 1 WATER COOLED FEATURES m /h dry vacuum system, m self-priming Bunded base with drain plug with 1% liquid containment High tank for a long running time without refuelling High performance pump end Male/female connectors for an external fuel tank Control panel with engine alarms, RPM throttle and emergency stop button Engine speed from 1 to 1 RPM Easy access maintenance doors Silenced model with a sound level from to dba at meters Heavy duty frame and robust skid base complete with forklift pockets and central lifting eye Water cooled engine Low maintenance requiring 1 1 1 1 1 1 1 1 1 1 1 1 Performance Curves Performance Curves STANDARD PUMP CONTROL PANEL 1 1 1 1 The standard version of this series has a control panel with the following features: Starting key Hour counter Fuel level monitor Vacuum meter Battery charge signal lamp Oil level signal lamp Water temperature signal lamp Pre-heating signal lamp 1 1 1 1 1 1 1 1 Performance Curves 1 OPTIONS - ACCESSORIES Customer color (RAL) (single or double) Inlet-Outlet polyethylene tubes with couplings and strainer Off-road trailer Performance Curves Pre-heating element Electric motor Second dry vacuum pump to increase the maximum flow up to m /h 1 1 1 1 Treatment for salt water OPTIONAL AUTO-START/STOP PUMP CONTROLLER 1 Inlet/Outlet size head Solid handling Impeller diam. S l/min m mm mm 1 m /h S l/min m mm mm m /h S l/min m mm mm m /h S 1 l/min m mm mm m /h S1 1 1 l/min m mm mm m /h flow Engine Min./ speed Dimension (W x L x H) C-1G D- 1D-T 1D-T 1 Running time (min. rpm @%) Dry weight 1/1 rpm x 1 x 1 mm 1 l, h kg 1/1 rpm x 1 x 1 mm 1 l, h kg 1/1 rpm 1 x x 1 mm l, h 1 kg 1/1 rpm 1 x x 1 mm l, h kg 1/1 rpm 1 x x 1 mm l 1, h kg As option you can get an electronic controller specifically designed for pumps. Its automatic features eliminate the need for personnel to be sent to the worksite, because the functionality of the pump can be programmed or controlled remotely. Manual/automatic regulation of engine speed Control of hydraulic circuit pressure and engine speed Automatic or remote start/stop of the pump Engine protection Historical failure list No. floats for managing the automatic start/stop Performance Curves 1 1 1 1 1 1 GENERACMOBILEPRODUCTS.COM
OW/OA Series OPEN VACUUM-ASSISTED PUMPS FROM TO 1 WATER OR AIR COOLED FEATURES m /h dry vacuum system, m self-priming High tank for a long running time without refuelling High performance pump end Male/female connectors for an external fuel tank Control panel with engine alarms, RPM throttle and emergency stop button Engine speed from 1 to 1 RPM Robust skid base complete with forklift pockets and central lifting eye Water cooled engine or Air cooled Deutz engine Low maintenance requiring Performance Curves 1 1 1 1 1 1 1 1 1 1 1 1 Performance Curves STANDARD PUMP CONTROL PANEL The standard version of this series has a control panel with the following features: Starting key Hour counter Fuel level monitor Vacuum meter Battery charge signal lamp Oil level signal lamp Water temperature signal lamp Pre-heating signal lamp 1 1 1 1 1 1 1 1 Performance Curves 1 1 1 1 1 OPTIONS - ACCESSORIES Customer color (RAL) (single or double) Inlet-Outlet polyethylene tubes with couplings and strainer Off-road trailer Pre-heating element Electric motor Second dry vacuum pump to increase the maximum flow up to m /h Treatment for salt water Top roof canopy 1 1 1 1 Performance Curves OPTIONAL AUTO-START/STOP PUMP CONTROLLER 1 OW/OA OW/OA OW/OA Inlet/Outlet size head Solid handling Impeller diam. l/min m mm mm 1 m /h l/min m mm mm m /h l/min m mm mm m /h OW/OA 1 l/min m mm mm m /h flow Engine Min./ speed Dimension (W x L x H) OW: D-1G OA: Deutz FL- OW: D- OA: Deutz FL- OW: 1D-T OA: Deutz FL-1 OW: 1D-T OA: Deutz FL-1 OW/OA1 1 1 l/min m mm mm m /h OW: 1 OA: Deutz BFL-1 1/1 rpm x x 1 mm 1 l 1/1 rpm x x 1 mm 1 l 1/1 rpm x x 1 mm l 1/1 rpm 1 x x 1 mm l 1/1 rpm 1 x x 1 mm l Running time (min. rpm @%) OW:, h OA:, h OW:, h OA: h OW:, h OA:, h OW:, h OA:, h OW: 1, h OA: 1, h Dry weight kg kg kg 1 kg 1 kg As option you can get an electronic controller specifically designed for pumps. Its automatic features eliminate the need for personnel to be sent to the worksite, because the functionality of the pump can be programmed or controlled remotely. Manual/automatic regulation of engine speed Control of hydraulic circuit pressure and engine speed Automatic or remote start/stop of the pump Engine protection Historical failure list No. floats for managing the automatic start/stop Performance Curves 1 1 1 1 1 1 GENERACMOBILEPRODUCTS.COM
SP Series OPEN SELF PRIMING PUMPS FROM TO 1 AIR COOLED FEATURES m self-priming High performance pump end Long running fuel tank Open blades impeller and wear plate in spheroidal cast iron Mechanical seal: Widia on widia without maintenance Body pump in cast iron type EN JGL Control panel with engine alarms, RPM throttle and emergency stop button Heavy duty skid base complete with forklift pockets and central lifting eye Air cooled Deutz engine Performance Curves STANDARD PUMP CONTROL PANEL Performance Curves The standard version of this series has a control panel with the following features: Starting key Hour counter Fuel level monitor Battery charge signal lamp Oil level signal lamp Water temperature signal lamp Pre-heating signal lamp Performance Curves 1 1 1 1 1 Performance Curves 1 Casing Water Outlet Water Inlet Inspection plate Inlet plates Bell coupling Engine Exhaust Frontal panel Battery support plate Skid base 1 1 Forklift pockets 1 Lifting frame Inlet/Outlet size head Solid handling Impeller diam. flow Engine Min./ speed Dimension (W x L x H) Running time (min. rpm @%) SP l/min 1 m mm 1 mm 1 m /h Deutz FL- 1/ rpm x 1 x 1 mm 1 l, h kg SP l/min m mm mm m /h Deutz FL- 1/ rpm x x 1 mm 1 l, h kg SP l/min m mm mm m /h Deutz FL-1 1/ rpm x x 1 mm 1 l h 1 kg SP 1 l/min m mm mm m /h Deutz FL-1 1/1 rpm x x 1 mm l, h 1 kg Dry weight OPTIONS - ACCESSORIES Customer color (RAL) (single or double) Inlet-Outlet polyethylene tubes with couplings and strainer Off-road trailer Pre-heating element Electric motor Performance Curves 1 SP1 1 l/min m mm mm 1 m /h Deutz BFM-1-FC /1 rpm x x 1 mm l 1, h kg Treatment for salt water 1 rpm rpm GENERACMOBILEPRODUCTS.COM
DISTRIBUTOR: All the features and photographs published in this catalogue are for guidance only. Every product could be subject to change at any time without prior notice. EN-DWP1.1 Generac Mobile Products Srl Part of Generac Power Systems, Inc. Via Stazione, bis - Villanova d Ardenghi (PV) - Italy Tel +.. - gmp.srl@generac.com www.towerlight.com www.generacmobileproducts.com