Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufacturer which provided the original information in this electronic deliverable. Michco s only part in this electronic deliverable was the electronic assembly process. You may contact Michco through the following methods: Phone (17) 484-912 or (800) 1-9 MI, OH, IN only 2011 N. High St. -- Lansing, Michigan -- 4890 Fax: (17) 484-98 Email: CustServ@Michco.com Web site: www.michco.com Parts Web site: www.floormachineparts.com Order Parts on Line at: www.floormachineparts.com Directly to Parts & Service: By Email: Shop@Michco.com By Fax: (17) 702-2041 By Voice: Use numbers above. Serving the Cleaning Industry Since 1922 Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners. Manuals are subject to Manufacturer s reproduction limitations. Originals or reproductions were provided by manufacturers through a request. We make no warranty as to the correctness of information provided in this document and you assume all risk.
SW 0 PARTS LIST Nilfisk MODEL 47017 /94 revised /00 FORM NUMBER 042290 BOOK F SECTION 0..1
94-00- TABLE OF CONTENTS BOOK F SW 0 F 0..1 1 DESCRIPTION PLAN Container System - Chassis And Handle... F-0..1- Container System - Axle And Wheels... F-0..1- Hopper And Main Broom System... F-0..1-7 Side Broom System... F-0..1-9 Broom Selector Guide... F-0..1- WHEN ORDERING PARTS * Use the 8 digit numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No. FORM NO. 042290
BOOK F CONTAINER SYSTEM - CHASSIS AND HANDLE 94- F 0..1 2 SW 0 9-1 18 2 18 FRONT 17 4 1 1 14 7 1 11 12 8 9 9 FORM NO. 042290
94- CONTAINER SYSTEM - CHASSIS AND HANDLE BOOK F 00- SW 0 F 0..1 Item Ref. No. Qty Description 14702 1Handle 2 0020 4 Scr, Hex /1-18 x -1/4 4702 1Adjusting Screw 4 470911Hopper Top Seal 47088 2 Strap 000 1 1/4-20 x 1/2 Loc Screw 7 4702 1Chassis 8 47099 1Swivel Caster 9 470 2 Strap 47120 2 Chassis Side Skirt 11 47118 1 Chassis Rear Skirt 47114 1 Skirt Kit (includes # & 11) 12 47080 1 Mounting Plate 1 47081 1 Broom Arm Yoke 14 00117 1/4-20 x 2 Loc Screw 1 00120 1 Cotter Hair Pin 1/4 x 1/2 1 00218 1 1/2 Flat Washer 17 00282 4 Nut, Hex Nyl Loc-Thin /1-18 18 002220 8 Wsh, Flt Std /1 FORM NO. 042290
BOOK F CONTAINER SYSTEM - AXLE AND WHEELS 94- F 0..1 4 SW 0 9-8 9 7 1 4 8 Install item 1 into lower saddle of item. 11 1 14 12 1 1 14 1 FRONT 1 17 1 1 17 2 9 18 1 FORM NO. 042290
94- CONTAINER SYSTEM - AXLE AND WHEELS BOOK F 00- SW 0 F 0..1 Item Ref. No. Qty Description 14704 1Axle TSB 8 2 474 Tab 47072 2 Support Hub 4 0091 4 #-24 x 1/2 Loc Screw 189 Thrust Bearing 00194 4 # Flat Washer 7 470 1Gear 8 170 1 Retainer Ring 9 4702 2 Wheel Assembly * 4742 2 Tire * 47027 2 Wheel Hub Rim * 471 4 Bearing 009097 2 Cap Nut TSB 8 11 471 1 Bearing TSB 8 12 4704 1 Pinion TSB 8 1 0011 1 1/8 x /8 Pin 14 002 2 Retainer Ring 1 478 2 Bearing 1 00112 4 #-14 x 1 Plastite Screw 17 47111 2 Yoke 47112 1 Yoke Kit (includes #1 & 17) 18 00919 #-24 x /8 Loc Screw FORM NO. 042290
BOOK F HOPPER AND MAIN BROOM SYSTEM 94- F 0..1 SW 0 9- FRONT 8 7 2 1 9 4 12 14 11 12 14 12 11 FORM NO. 042290 1 12
94- HOPPER AND MAIN BROOM SYSTEM BOOK F 00- SW 0 F 0..1 7 Item Ref. No. Qty Description 147019 1Hopper 2 47082 1Hopper Lip 47089 1Hopper Strap Note 4 47090 1Hopper Lip Plate Note 002829 1/4-20 x /8 Screw 00278 1/4-20 Nyl Loc Nut 7 00908 4 #-24 x 7/8 HP- Screw 8 47 1 Breather 9 00194 # Flat Washer 011 1 Main Broom 11 4708 2 Broom Mounting Disc 12 009149 4 1/4-14 x 1 Screw 1 470 1 Broom Shaft TSB 8 14 00114 2 /2 x 7/8 Pin Note: The Hopper Lip Plate PN47090 (item #4 at left) and Hopper Strap PN47089 (item # at left) have been eliminated. They are being replaced by a one piece Hopper Lip Plate PN47090 (item # below). All machines built after June 199 will have this change. When installing the new Hopper Lip Plate PN47090 on a machine built before June 199, the () holes for mounting the old Hopper Lip Plate PN47090 (item #4 at left) must be plugged. You can use the existing () screws and nuts (items # and at left) by simply re-installing them in the holes after removing the Hopper Lip Plate (item #4 at left). Items # and 4 at left are no longer available, if they need to be replaced, order item # below. NEW STYLE FRONT 1 2 4 Item Ref. No. Qty Description 147019 1Hopper 2 47082 1Hopper Lip 47090 1Plate, Hopper Lip 4 00909 4 Scr, Hex Hd Thd Form -24 x.0 47 1 Breather 00194 4 Wsh, Flt SAE # FORM NO. 042290
BOOK F SIDE BROOM SYSTEM 94- F 0..1 8 SW 0 9-9 1 12 8 1 7 4 14 2 17 FRONT 1 18 11 1 FORM NO. 042290
94- SIDE BROOM SYSTEM BOOK F 00- SW 0 F 0..1 9 Item Ref. No. Qty Description 147179 1Side Broom 2 470 1Bumper Disc 478 2 Bearing 4 47070 1Pulley 47122 1 Belt 07412 Bushing 7 47408 2 Guide Wheel 8 472 1 Broom Arm 9 47094 1Adjusting Screw TSB 8 009017 2 1/2 Flat Washer 11 0012 1 M12-1.7 Nyl Loc Nut 12 0011 1 M12-1.7 x 0 Bolt 1 002708 2 1/4-20 Nyl Loc Nut 14 00282 2 1/4-20 x 1-1/4 Screw 1 002948 1/4-20 x /4 Screw 1 0009 1 1/4-20 x 1/2 Screw 17 720 1 Bushing 18 002098 1/4 Flat Washer FORM NO. 042290
BOOK F BROOM SELECTOR GUIDE 94- F 0..1 SW 0 00- Row Main Broom: PN011 Polypropylene (STD.) Good all-purpose broom for hard floor and carpet. Resists moisture. PN0 Union Mix (Optional) Stiffer, natural fiber bristle for heavier duty applications, rough concrete or asphalt. Moisture can attack this natural fiber bristle. Length... 19" (48 cm) Diameter... " (2 cm) Useable Bristle... 2" ( cm) Side Broom: PN47179 Polypropylene (STD.) The side broom function is to sweep the dirt and debris away from the curb, wall, pallet, etc. into the path of the main broom. Diameter...11" (28 cm) FORM NO. 042290
DANMARK Nilfisk-Advance Nordic A/S Myntevej, 8900 Randers 8 42 84 Fax 8 41 19 NORGE Nilfisk-Advance AS Enebakkvn, 119, 080 Oslo, Postboks 19, Manglerud, 012 Oslo 22 08 0 Fax 22 08 Distriktsrepresentanter over hele landet SVERIGE Nilfisk-Advance AB Sjöbjörnsvägen, 117 7 Stockholm 08 944 00 Fax 08 944 0 FINLAND/ SUOMI BERNER Ltd. Facotek Department Etäleranta 4B, 00 Helsinki +8 9 14 182 AUSTRALIA Nilfisk-Advance Pty. Ltd. ACN 00 72 2 Head office: 17 Leeds Street, Rhodes, N. S. W. 218 (02) 97 1244 Fax (02) 97 9 Customer Responce Centre: 1 800 011 01 BELGIQUE / BELGIË/ LUXEMBOURG Nilfisk-Advance s.a./n.v. Doornveld/ Sphere Business Park Industrie Asse, nr 11 bus 41 171 Zellik-Asse (02) 47.0.0 Fax (02) 4.44.1 CANADA Nilfisk-Advance Ltd. 9 Watline Avenue Mississauga, Ontario L4Z 1X (90) 712-20 Fax (90) 712-2 DEUTSCHLAND Nilfisk-Advance AG Siemensstraße 2-27 242 Rellingen (041 01) 990 Fax ( 041) 99191 Zentraler Kundenservice für die Industrie: 0180 7 97 Institutionen und Gebäudereiniger: 0180 00 11 70 FRANCE Nilfisk-Advance S.A. BP 24 91944 Courtaboeuf Cedex (01) 9.9.87.00 Télécopie (01) 9.9.87.01 HONG KONG Nilfisk-Advance Ltd. 2001, 20/F HK Worsted Mills Industrial Building 1-9 Wo Tong Tsui Street Kwai Chung, N.T. 2427 9 1 Fax 2487 828 IRELAND Nilfisk-Advance Ltd. 28 Sandyford Office Park Dublin 18 + 1 29488 Fax + 1 29484 JAPAN Nilfisk-Advance Inc. -4-9 Chigasaki Minami Tsuzuki-Ku Yokohama 224 04-942-7741 Fax 04-942-4 MALAYSIA Nilfisk-Advance Sdn Bhd Lot 2, 1 st. Floor Lorong 19/1A 400 Petaling Jaya Selangor Darul Ehsan 0-78188 / 0-78189 / 0-7888 Fax 0-7828 NEDERLAND Nilfisk-Advance B.V. Flevolaan 7, Postbus 41 180 AH Weesp 0294-42121 Fax 0294-400 NEW ZEALAND Nilfisk-Advance Limited 477 Great South Road, Penrose Auckland (09) 2 0092 Fax (09) 2 440 SCHWEIZ / SUISSE Nilfisk-Advance AG Ringstrasse 19, 9 Kirchberg/Wil 719 2 2 8 Fax 719 2 84 44 SINGAPORE Nilisk-Advance Pte. Ltd. 22, Woodlands Industrial Park E1 Singapore 77740 () 79 90 Fax () 79 91 TAIWAN Nilfisk-Advance Ltd. 1 F, No.2, Lane 12, Sec. 2 Ta An Road, Taipei 700 22 8 Fax 784 08 4 UNITED KINGDOM Nilfisk-Advance Limited Newmarket Road Bury St. Edmunds Suffolk IP SR (01284) 71 Fax (01284) 702 USA Nilfisk-Advance Inc. 1400 21 st Avenue North Plymouth, MN 447-408 +1 800 989 22 Fax 1 800 989 Nilfisk-Advance of America, Inc. 00 Technology Drive Malvern, PA 19 () 47 47-427 ÖSTERREICH Nilfisk-Advance GmbH Vorarlberg Allee 4 120 Wien 1 1 8 0 Fax 1 1 8 0 40 ESPAÑA Nilfisk-Advance, S.A. Torre D Ara Passeig del Rengle, PI.9- E-0802 Mataró (Barcelona) Tel. 9 741 24 00 Fax: 9 77 80 20 Central atención al cliente: 902 200 201 nilfisk@nilfisk-advance.es www.nilfisk-advance.com Distribuidores y Servicio Técnico en toda España y Andorra ITALIA Nilfisk-Advance Italia Spa Località Novella Terza 282 Guardamiglio (LO) Italy +9 077 41407-4 Fax +9 077 414097 www.nilfisk-advance.com PORTUGAL Nilfisk-Advance Lda. Rua Cândido de Figueiredo, 91-i, 0-1 LISBOA 01/7784142 Fax 01/7781 Porto 02/27 Fax 02/2079 Açores 09/28092/ Fax 09/28129 Madeira 091/2289 Fax 091/22879 GREECE Embiom S.A. ˆÊ. µôùïè ÁÌ ÓË 0 ÚÁùÚÔ appleôïë 14 2 õ Ó 9901 - Fax 99180 www.nilfisk-advance.com 2002 Printed in USA
Material composition of the Nilfisk SW 0 High Density Polyethylene High Density Polyethylene Nylon Glass Filled SBR Synthetic Rubber High Density Polyethylene ABS Powder Paint Coated Steel Zinc Plated Steel High Density Polyethylene Neoprene Elastomer Soft Rubber Powder Paint Coated Steel Polypropylene Powder Paint Coated Steel Polypropylene (hub) Polyethylene Urethane ABS Nylon, Glass Filled Polypropylene