Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control

Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control

Proportional valves PROPORTIONAL VALVES... - PFRH... -8 EPV...- EPV6...- EPV6A...-7 EPV6...-8 ESV-8-C... - ESV--C... - ESV--C... - ESV-8-O... -6 ESV--O... -8 ESV--O... - EFV--C... - EFV--C... -6 EFV--O... - EFV--O... - ESV9-8-E... -8 ESV9-8-F... -9 ESV9-8... -5 ESV9-... -5 ESVL9--E... -5 ESVL9--F... -5 ESVL9-... -55 PFRA... -57 EFV--C... -59 EFV--O... -6 PDRA... -67 IRV-... -69 IRV-...-7 ERV-...-7 ERV-6...-75 PPDA...-77 EPRV-8...-79 EPPV5... -8 EPPV6... -8 EPRV-... -85 EPRV-... -87 EPRV-6... -89 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

Proportional valves Valve locator/section contents Note: Proportional valve solenoid coils and electronic valve drivers are covered in section C of this Catalog. Functional symbol (In) Model Cavity Flow rating Typical pressure Proportional bi-directional, NC, poppet L/min (USgpm) bar (psi) PFRH A879 8 (5) () -8 Page (Out) Model Cavity Flow rating Typical pressure Proportional bi-directional, NC, poppet L/min (USgpm) bar (psi) EPV C-- - (-8) 5 (5) - Page EPV6A EPV6 Model Cavity Flow rating Typical pressure Proportional flow control, NC, poppet L/min (USgpm) bar (psi) EPV6A C-6-SU (undercut) -6 8 () -7 EPV6 C-6-SU (undercut) -6 8 () -8 Page Model Cavity Flow rating Typical pressure Proportional flow control, NC, poppet L/min (USgpm) bar (psi) ESV-8-C C-8- (9) () - ESV--C C-- 7 (9) () - ESV--C C-- (7) () - Model Cavity Flow rating Typical pressure Proportional flow control, NO, poppet L/min (USgpm) bar (psi) ESV-8-O C-8- (9) () -6 ESV--O C-- 7 (9) () -8 ESV--O C-- (7) () - Page Page Model Cavity Flow rating Typical pressure Proportional flow control, NC, spool L/min (USgpm) bar (psi) EFV--C C-- 8 () () - EFV--C C-- 77 () () -6 Model Cavity Flow rating Typical pressure Proportional flow control, NO, spool L/min (USgpm) bar (psi) EFV--O C-- () () - EFV--O C-- (8) () - Page Page Model Cavity Flow rating Typical pressure Page COIL A Proportional flow control, NO, spool L/min (USgpm) bar (psi) ESV9-8-E C-8-. (.9) (,) -8 ESV9-8-F C-8-. (.9) (,) -9 ESV9- C--5S. (5.8) 5 (,6) -5 - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Proportional valves Valve locator/section contents Functional symbol E F Model Cavity Flow rating Proportional flow Control, NC, spool L/min (USgpm) Typical pressure bar (psi) ESVL9--E C--5S (6) 5 (6) -5 ESVL9--F C--5S (6) 5 (6) -5 Page Model Cavity Flow rating Typical pressure Proportional bi-directional, NC, poppet L/min (USgpm) bar (psi) PFRA A67 8 (5) () -57 Page Model Cavity Flow rating Typical pressure Page Proportional flow control, NC, spool L/min (USgpm) bar (psi) EFV--C C-- < () () -59 Model Cavity Flow rating Typical pressure Page Proportional flow control, NO, spool L/min (USgpm) bar (psi) EFV--O C-- < (<) () -6 Model Cavity Flow rating Typical pressure Page Proportional relief, NO, POPPET L/min (USgpm) bar (psi) PDRA A879.5 (.) 5 (5) -67 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -5

Proportional valves Valve locator/section contents Functional symbol Model Cavity Flow rating Typical pressure Proportional inverse relief, poppet L/min (USgpm) bar (psi) IRV- C-- (.5) () -69 IRV- C-- 57 (5) (5) -7 Page Model Cavity Flow rating Typical pressure Page Proportional relief, spool L/min (USgpm) bar (psi) ERV- C-- <6 (5) () -7 ERV-6 C-6- < (<9) () -75 EPPV5 TC65 8 (.) 5 (75) -8 EPPV6 TC6 8 (.) 5 (75) -8 Model Cavity Flow rating Typical pressure Page Proportional reducing/relief, spool L/min (USgpm) bar (psi) PPDA A879 (5) () -77 EPRV-8 C-8-7.6 () 5 (5) -79 Model Cavity Flow rating Typical pressure Proportional reducing/relief, spool L/min (USgpm) bar (psi) EPRV- C-- 8 () 5 (5) -85 EPRV- C-- (8) () -87 EPRV-6 C-6-7.6 () 5 (5) -89 Page -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Proportional valves Section overview This section gives basic specifications for the complete line of Vicker s screw-in proportional control valves. Its purpose is to provide a quick, convenient reference tool when choosing proportional valves or when designing a system using these components. The EPV has several outstanding performance features which give it a unique position in the screwin cartridge valve market. Valve gain linearity, flow force pressure compensation characteristics above bar ( psi) and low internal leakage. The EPV6 is a proportionally controlled two-way poppet type valve. The main poppet amplifies a small flow through the pilot circuit and is comparable to a transistor. As the transistor uses small currents to control larger currents, the hydraulic valve transistor or VALVISTOR uses the pilot flow to control the main stage flow with servolike response flow to control. The ESV is a proportional two-way, pressure compensated, poppet type flow control valve. The valve is available in 8,, and sizes, both normally open or normally closed in the de-energized position. The EFV is a proportionally controlled two-way, spool type flow control valve. Technically the valve is not pressure compensated, but it is partial flow force pressure compensated. The EFV is a three port, pressure compensated, proportional flow control valve. The valve can be used as a priority flow regulator, with regulated flow being supplied to port and excess flow being by-passed to port. If port is blocked the valve functions as a restrictive, way, pressure compensated flow regulator. The ERV- is an electric, proportionally controlled, internally pilot operated, spool type screw-in relief valve. It is capable of handling flows from,8-6, L/min (-5 USgpm) at pressures from 5- bar (5- psi). Also available is an ERV-6 which is capable of handling flows from 7,6- L/min. (-5 USgpm) at pressures from 5- bar (-5 psi). The ERV- is a low flow electric proportionally controlled relief valve similar to the ERV-. This valve is rated for flows from,-,8 L/min (.5-.75 USgpm) and pressures up to 5 bar (5 psi). The EPRV-8 is an electric, proportionally controlled, direct acting spool type, screw-in pressure reducing/ relieving valve. It is capable of handling flows from -7,6 L/min (- USgpm) at set pressures from - bar (- psi). The EPRV- is an electric, proportionally controlled, internally pilot operated, spool type, screw-in pressure reducing/relieving valve. It is capable of handling flows from -7,6 L/min (- USgpm) at set pressures from -5 bar (-5 psi). Also available is an ERV-6 which is capable of handling flows from -8 L/min (- USgpm) at set pressures from -5 bar (-5 psi). The EPRV- is an electric, proportionally controlled, internally pilot operated, spool type, screw-in pressure reducing/relieving valve. It is capable of handling flows from - L/min (-8 USgpm) at set pressures from 5-7 bar (5- psi). Vickers proportional pressure and flow control valves are designed to be easily controlled by the simplest of DC electrical devices such as a volt battery and a potentiometer. Varying the voltage at the coil is one of the simplest means of control available. Any of the Vickers DC coils will work on most of these valves simply by varying the voltage between and 75% of the rated coil voltage. It should be noted that as the operating temperature of a coil increases, the solenoid force decreases. Therefore if the voltage is held constant as the coil heats up then valve pressure (or flow) will change. The IRV is a proportionally controlled poppet type, relief valve, with an inverse function. This valve is capable of handling flows up to L/min (.5 USgpm) and pressures up to bar ( psi). IRV- is an inverse proportionally controlled spool type two stage relief valve. Ideal for use to control fan drive or brush pressure, where full speed or force is required under electrical failure. Valve is capable to handle flow up to 57 lpm (5 USgpm) and pressure up to bar (5 psi). Electrical current controls with PWM are recommended for all Eaton proportional valves. Closed-loop electrical control with feedback from the parameter to be monitored will provide the most accurate control. Valve features and benefits Products in this catalog have been fatigue tested to one million cycles at % or million cycles at 5% of rated pressure All operating parts are hardened steel, ground and honed for long life and low leakage Designed for maximum flexibility and minimal space requirements All exposed cartridge surfaces are zinc dichromate plated to resist corrosion Reliable, economical and compact Rated flows up to 6 L/min ( USgpm) Optional nose-in, side-out or side-in, nose out flow direction (EPV6 series) Coil features and benefits The valves in this catalog are offered with a choice of two or three standard voltages and several types of electrical connections. For other coil ratings and connections, consult your Eaton applications engineer. Variety of voltages and terminations Coils are interchangeable for serviceability on the EPV and EPV6. Coils are interchangeable for serviceability on the ERV-, EPV-6, EPRV- and EPRV-6 Compact, one-piece weather-proof encapsulated design. Eliminates need for extra seals An arc suppression diode molded into the coil is available as a standard option on ERV, EPRV and EFV valves Fluid cleanliness Proper fluid condition is essential for long and satisfactory life of hydraulic components and systems. Hydraulic fluid must have the correct balance of cleanliness, materials, and additives for protection against wear of components, elevated viscosity, and inclusion of air. Warning Application of these products beyond published performance specifications may cause valve malfunction which may result in personal injury and/or damage to the machine. Warning For pressures over bar ( psi) use steel housing. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -7

PFRH - Proportional valve Proportional bi-directional poppet, flow control valve Up to 8L/min (5 USgmp) bar ( psi) (In) (Out) Sectional view Description This is a proportionally operated way poppet valve. Ideal for use in lowering circuits to give good control to the operator. The valve will compensate as the pressure difference increases to prevent speed increase due to increasing load. Operation In the de-energised position the valve is blocked in both directions. As the current to the coil is increased the valve opens proportionally. There is also an element of compensation as the pressure difference across the valve increases. See performance graphs. Performance data Features High flow capacity with reduced space requirements. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Reversible coil without affecting performance. Ratings and specifications Performance data is typical with fluid at cst (5 SSU) Max inlet pressure bar ( psi) Max regulated flow at rated current @ 5 bar L/min (5. USgpm) @%, 5 L/min (.9 USgpm) @85%, L/min (.9 USgpm) @75% Frequency to Hz - recommended Dead band 8-6% of rated current Response time 8ms Internal leakage Up to.67 ml/min (dpi) bar differential at centistrokes Temperature range (oil) - to C (- to 8 F) Cavity A67 (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted Fluids Most general purpose hydraulics fluids Seal material Standard nitrile with PTFE back up rings Filtration S55/ Class 6/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials Aluminium Coil model code C6-*-*/9 Voltage available, VDC Coil weight. kg (.6 lbs) Weight. kg (. lbs) Seal kit SK8 (Nitrile) SK8V (Viton ) Viton is a registered trademark of E.I. DuPont Pressure drop Viscosity = cst (5 SSU) PFRH @ % Pressure - psi Flow - L/min.5 5 7.5 Flow - US gpm 7 Pressure - bar Flow - US gpm 7.5 5.5 Performance curves 5 5 75 % related amps 5 bar bar Flow - L/min Flow - US gpm Pressure differential - bar 7 7.5 5.5 8% of rated amps 6% of rated amps % of rated amps Pressure differential - psi Flow - L/min -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

PFRH - Proportional valve Proportional bi-directional poppet, flow control valve Up to 8L/min (5 USgmp) bar ( psi) Model code PFRH N 6 H W 5 6 Function PFRH - Normally closed Seal material N - Nitrile V - Viton Coil termination H - DIN65 F - Flying Lead DM - Deutsch moulded Other terminations available on request. 6 Port size Code Port size Housing number lank Cartridge only W /" SP A59 W /8" SP A75 6T /8" SAE A955 Manual override 6 - Screw 5 Voltage - VDC - VDC Dimensions mm (inch) Cartridge only Installation drawing. (.87) 8. (.89) 5.5 (.) 5. (.97) M/O plate fitted by customer holes Ø6.8 (.7) thro.8 (.5) 98. (.86) 5. (.97). (.87) 5.8 (.) 6. (.6) 9. (.75) 6. (.) 6. (.) 5.9 (.6).8 (.5) 6.5 (.) A/F 8.9 (.7) / -6-UNF-A Ø5.8 (.6) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -9

EPV - Proportional valve Proportional uni-directional poppet, flow control valve Up to L/min (8 USgmp) 5 bar (5 psi) Operation In the de-energized condition, blocked from port to with no reverse flow permitted. When energized, flow is allowed from port to port in direct proportion to the current applied to the solenoid coil. Features Hardened, ground and honed working parts to limit leakage. IP69K Tough coil compatibility. Continuously rated. Compact design with low pressure drop. Sectional view Performance data Ratings and specifications Description This is a uni-directional proportionally controlled, normally closed poppet valve. It is ideal for lowering circuits controlling the speed of movement with low leakage when closed. Performance data is typical with fluid at,8 cst (5 SSU) and 9 C ( F) Typical application pressure (at port ) 5 bar (5 psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow - L/min ( - 8 USgpm) Operating ambient temperature - to 9 C (- to 9 F) Cavity C-- Fluids Anti-wear hydraulic oils with una-n seals (standard) Phosphate esters (non-alkyl) with Viton seals are available by request Viton is a registered trademark of E.I. DuPont Weight cartridge only,78 kg (.7 lbs) Filtration 7 - bar ( - psi) Cleanliness code 7/5/ + bar (+ psi) Cleanliness code 5// Standard housing materials Aluminum or Steel Typical hysteresis Less than % of rated current at bar pressure drop Pulse Width Modulated (PWM) Internal leakage cm maximum @ bar ( psi) and oil viscosity of cst Oil viscosity range - 8 cst Nominal supply voltage or VDC Threshold current Adj from - 6 ma ( VDC) Adj from 5 - ma ( VDC) Coil current @ max flow.7 amps max @ VDC. amps max @ VDC Recommended PWM frequency - Hz application dependent, 5 Hz typ Coil resistance @ C (86 F) V-6.5Ω V-5.Ω Power consumption @ rated current and C coil temperature Cartridge seal kit V-.8 watts V-.8 watts -758 (una-n) - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EPV - Proportional valve Proportional uni-directional poppet, flow control valve Up to L/min (8 USgmp) 5 bar (5 psi) Model code EPV * ** ** *** * * (S**) Function EPV - Electro-proportional flow control valve, poppet type Size - Size Valve housing material Omit for cartridge only A - Aluminum S - Steel Maximum operating pressure for aluminum housing is bar ( psi) 5 Seal material N - una-n V - Viton (standard) NF - una-n and 6 mesh filter screen VF - Viton and 6 mesh filter screen Port size 5 Code Port size Housing number 8 Coil/Connector types Aluminium 6 7 8 9 Steel Cartridge only G /8" SPP 8767-75 6H SAE 6 8767-75 8H SAE 8 8767-75 See section J for housing details. Connector No connector VDC VDC W Leadwire (DC only) -68-6 Q Spade terminals (DC only) -686-6 U DIN 65-687 -6 Y Metri-Pack 5 male* -685-6 F Weather-Pack male -688-68 N Deutsch DT-P -5-957 *Preferred Packard connector. 6 Voltage rating D - VDC D - VDC D - No coil 7 Manual override option - No manual override M - Pin type S - Screw type (mm Hex) Manual override is available in two different configurations, either push pin type is used when system pressure does not exceed bar ( psi). The screw type can be used at any system pressure. 9 Design number - Design no. Special features lank - None Dimensions mm (inch) Cartridge only Ø 6,7 (.5) Manual override Ø,5 (.7) Ø 5,8 (.) Valve is shown with U coil. See Section C for coil information. Torque cartridge in housing A - 7-5 Nm (5- ft. lbs) S - 68-75 Nm (5-55 ft. lbs) 8,5 (.7), (5.7),9 (.65) Warning The cavity should be machined to the,9 (.56) maximum diameter and 6, (.7) maximum depth. See section M. Warning When using the Screw Type override, care must be taken to return the override back to its neutral position before activating the valve. Failure to take this precaution may result in personal injury or damage to the machine. Opening clearance, (.8), (.).875"- Thd. Ø 5,8 (.6) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

EPV - Proportional flow control valve Proportional uni-directional poppet, flow control valve Up to L/min (8 USgmp) 5 bar (5 psi) Step response data Flow response in % of max flow 5 On stroke 5 msec Typical current step to provide 5% flow Off stroke 6...8..6 Time - sec Flow vs current With bar differential between inlet and outlet A - bar ( psi) pressure drop from Port to Port 8 - bar (5 psi) pressure drop from Port to Port Flow - USgpm 6 A Flow - L/min 5 6 7 8 9 % Current - ma - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EPV - Proportional flow control valve Proportional uni-directional poppet, flow control valve Up to L/min (8 USgmp) 5 bar (5 psi) Flow vs pressure drop Per % of input current L/min USgpm Flow 8 6 Pressure drop - psi A - % of input current - 85% of input current C - 7% of input current D- 57% of input current E - % of input current 6 8 6 8 Pressure drop - bar Typical flow response For an amplitude of +_ % maximum stroke (center to offset) about the 5% position. A 5 P = bar (5 psi) - 5 Phase lag - degrees -6. Hz Hz Hz Hz A - d - Phase Lag Frequecy Hz Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

EPV6 - Proportional valve Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) EPV6A EPV6 Operation A style (nose in, side out) - In the de-energized position this valve remains closed from port to port. When current is applied to the coil, a ontrolled increasing flow will be allowed from port to port, in proportion to the current applied. style (side in, nose out) - in the de-energized position the valve remains closed from port to port. When current is applied to the coil, a controlled increasing flow will be allowed from port to port. In both examples free reverse flow is allowed in the opposite direction. Features Hardened and ground working parts. 8 bar working pressure, very low hysterisis, long life. Sectional view Description This is a way normally closed, pressure compensated, poppet type, electro proportional screw in cartridge valve with a low hysterisis and fine control. The valve is suitable for demanding applications where long life and accuracy is demanded Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) 8 bar ( psi) Cartridge fatigue pressure (infinite life) 8 bar ( psi) NFPA rated Rated flow to 6 L/min ( USgpm) EPV6A 5 cm /min, max @ bar ( psi) Internal leakage EPV6 cm /min, max @ bar ( psi) Oil viscosity range -8 cst Nominal supply voltage / VDC Threshold current Adj from 5-6 ma ( VDC) Adj from 75-5 ma ( VDC) Coil current for maximum flow.7 amps @ VDC. amps @ VDC Recommended PWM frequency - Hz application dependent, 5 Hz typ Power consumption V-.8 watts V-.8 watts Coil resistance v-6.5 V/V-5. V Temperature range - to 9 C (- to 9 F) Cavity C-6-S (undercut) Antiwear hydraulic oils with una-n seals (standard) Fluids Phosphate esters (non-alkyl) with Viton 7- bar (- psi) Cleanliness code 7/5/ Filtration + bar (+ psi) Cleanliness code 5// Housing material (standard) Aluminum or steel less than % of rated current @ bar Typical hysterisis pressure drop-pulse width modulated (PWM) Weight cartridge only kg (. lbs) Seal kit -569 (una-n) Viton is a registered trademark of E.I. DuPont - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EPV6 - Proportional valve Proportional flow control, NC, poppet 6L/min ( USgpm) 8 bar ( psi) Model code EPV 6 * ** * *** ** *** * * (S**) Function EPV - Solenoid valve Size 6-6 size Flow direction A - Nose-in, side-out - Side-in, nose-out Rated flow - L/min (.5 USgpm) 6-6 L/min (6 USgpm) - L/min (6 USgpm) 6-6 L/min ( USgpm) 5 Valve housing material Omit for cartridge only A - Aluminum S - Steel Note: Aluminum housings can be used for pressures up to bar ( psi). Steel housing must be used for operating pressures above bar psi). 5 6 7 8 9 6 Port size Code Port size Housing number 7 Seal material N - una-n (standard) V - Viton NF - una-n and 6 mesh filter screen VF - Viton and 6 mesh filter screen 8 Voltage rating D - VDC D - VDC D - No Coil Aluminium EPV6-A 9 Manual override option lank - No manual override - No manual override M - Pin type S - Screw type (mm Hex) Manual override is available in two different configurations, either push pin type is used when system pressure does not exceed bar ( psi). The screw type can be used at any system pressure. Note: When using the Screw Type override, care must be taken to return the override back to its neutral position before activating the valve. Failure to take this precaution may result in personal injury or damage to the machine. Steel EPV6-A EPV6- EPV6- Cartridge only G /" SPP -858-6667 -85-655 6G /" SPP -859-659 -85-69 H SAE -855-78 -88-698 H SAE -857-6669 -89-698 5C CETOP5 (NFPA D5) Interface (Requires steel body) See section J for housing details. Connector type - No connector F - Weatherpack male Q - Spade Terminals (DC only) W - Flying Lead N - Deutsch DT-P Y - Metripack 5 male* U - DIN 65 *Preferred Packard connector. For coil part numbers and dimensions see section C. Design number - Design no. Special features lank - None M - Pin type S - Screw type Warning When using the Screw Type override, care must be taken to return the override back to its neutral position before activating the valve. Failure to take this precaution may result in personal injury or damage to the machine. Caution A separate check valve is required down stream to isolate the EPV valve from load forces when the EPV is used to hold a load. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -5

EPV6 - Proportional valve Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) Pressure drop curves Command current V V A- 6 ma ma - 7 ma 5mA C- 8 ma ma D- 9 ma 5mA E- ma 5mA F- ma 55mA G- ma 6mA H- ma 65mA I- ma 7mA Pressure differential A- bar 5 psi - bar psi C- 5 bar 7 psi D- bar 5 psi E- bar psi Pressure drop @ L/min ( USgpm) Pressure drop DP On stroke Delay/reach 9% Off stroke delay/reach 9% bar (9 psi) ms/5 ms 5 ms/5 ms bar (5 psi) ms/7 ms 5 ms/7 ms -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EPV6A Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) Dimensions mm (inch) Valves are shown with U coil. See Section C for coil information. Torque cartridge in aluminum housing 8- Nm (8-9 ft. lbs) Torque cartridge in steel housing 6-9 Nm (- ft. lbs) Cartridge only - EPV6A Nose-in, side out 7, (.7) 9, (5.7) Ø,5 (.7),7 (.9) Note: When stand alone housings are used, the following guidelines apply: EPV6-A: Port is to be plugged. EPV6-: Port is to be connected to port in order to provide the required feedback flow path. 85, (7.9) 67,9 (.67) 8, (7.)." - Thd. Screw type actuator (shown) mm hex socket With manual actuator 8, Hex (.5) Ø 5, (.) No manual actuator Installation drawing (Steel) 9.7 (5.7).5 (.6) 8. (.5). (.9) Port LS SAE -Plugged X Ø8.7 (.).7 (.5) 76. (.).8 (.97) 79. (.).8 (.97). (.9) 8. (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -7

EPV6 Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) Dimensions mm (inch) Cartridge only - EPV6 Side-in, nose out For EPV6- (flow to ), Port must be connected to Port externally to the cartridge, either by passages in the cavity block or external plumbing. When purchased with undercut body, this connection is included in the body and Port is not machined. A separate external port connection is not required for EPV6-A (flow to ). 7, (.7) Ø,5 (.7) Required external connection with standard C-6-S cavity. 9, (5.7),7 (.9) 85, (7.9) 67,9 (.67) 8, (7.) Screw type actuator (shown) mm hex socket."- Thd. 7, (.7) 8, Hex (.5) Ø 5, (.) Ø 8,6 (.) With manual actuator No manual actuator Installation drawing (Steel) 9.7 (5.7).5 (.6) 6.5 (.5). (.9) 6. (.75) Port LS SAE -Plugged X Ø8.7 (.).7 (.5) 76. (.).8 (.97) 79. (.).8 (.97). (.9) 8. (.5) -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EPV6 - Proportional valve Proportional flow control, normally closed, poppet 6L/min ( USgpm) 8 bar ( psi) EPV6-A-**-S-5C-**-D-(*)-*- CETOP 5 Interface mm (inch) 76, (.9) Required for removal 9,7 (8.65) 99,5 (.9).5- UNC x.5" socket head cap screw (olt Kit 556) M6 x 6 socket head cap screw (olt Kit 6896) 7,6 (.8) 69,5 (.7) 6, (.8) 5, (.) ISO--AC-5--A (NFPA D5) mounting surface,8 (.89) P? A,7 (.6) Tb Ta PA Ta Tb Ø 6,96/6,85? thru holes EPV6--**-S-5C-**-D-(*)-*- CETOP 5 Interface mm (inch) PA Tb Ta 5, (.) 7,6 (.8) 69,5 (.7) 6, (.8).5- UNC x.5" socket head cap screw (olt Kit 556) M6 x 6 socket head cap screw (olt Kit 6896) 76, (.9) Required for removal 9,7 (8.65) 99,5 (.9) ISO--AC-5--A (NFPA D5) mounting surface,8 (.89) P,7 (.6) Note: CETOP 5 Seal Kit -9667. Tb? A Ta Ø 6,96/6,85 thru holes Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -9

ESV-8-C - Proportional valve Proportional flow control, normally closed, poppet Up to L/min (8 USgpm) bar ( psi) Operation In the de-energized position, this valve blocks flow from port to port and free flow is allowed from port to port. In the energized position, flow from port to port is restricted while free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated flow @ 5 psid, 8. gpm min, 9. gpm nom Leakage (fully closed) 5 drops/min max @ psi Nominal supply voltage / VDC Current to open valve 5-5 ma (V coil), 75-75 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-8- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis Usgpm with dither Weight cartridge only. kg (. lbs) Seal kit -65875 (una-n), -65877 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally closed, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm Pressure Drop - bar 5 5 8 6 5 5 5 5 Pressure Drop - PSID...6.8...6 Current - Amps Flow - L/min Flow - USgpm Flow - L/min - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESV-8-C - Proportional Valve Proportional flow control, normally closed, poppet Up to L/min (8 USgpm) bar ( psi) Model code ESV 8 * C * ** ** * * * ** ** Function ESV - Proportional flow control Size 8-8 size Seal material N - una-n V - Viton Style C - Normally open 5 Housing material lank - Cartridge only A - Aluminum 5 6 7 8 9 6 Port size Coil series Code Port size Housing number lank - No coil S - S Series, W Aluminium Cartridge only For coil part numbers and dimensions see section C. G /" SPP -677 G /8" SPP -678 Coil special features T SAE -57 lank - No coil 6T SAE 6-67 - No special feature 8T SAE 8-67 See section J for housing details. 7 Coil voltage - No coil D - VDC D - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. Valve special features lank - None Dimensions mm (inch) Cartridge only Installation drawing 9, HEX (.75) 5.5 (.7) 9. (.75) 5,5 (.7), HEX (.875) 6, (.) 8. (.5) X 7. 5.8 (.8) (.) 5.5 (.6) 7,8 (.9),75-6 THD.. (.). (.7) 5.8 (.) Ø,6 (.97) Ø,8 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

ESV--C - Proportional valve Proportional flow control, normally closed, poppet Up to 7 L/min (8.5 USgpm) bar ( psi) Operation In the de-energized position, this valve blocks flow from port to port and free flow is allowed from port to port. In the energized position, flow from port to port is restricted while free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated flow @ 5 psid, 8.5 gpm min, 9. gpm nom Leakage (fully closed) 5 drops/min max @ psi Nominal supply voltage / VDC Current to open valve 9- ma (V coil), 5-5 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (.8 lbs) Seal kit 5658 (una-n), 56686 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally closed, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm Pressure Drop At Max Poppet Opening 5 5 5 5 5 5 5 5 5 Pressure Drop - PSID Flow - USgpm 6 8 Flow vs. Current at 5 PSID...6.8...6 Current - Amps - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESV--C - Proportional valve Proportional flow control, normally closed, poppet Up to 7 L/min (8.5 USgpm) bar ( psi) Model code ESV * C * ** *** * * * ** ** Function ESV - Proportional flow control Size - size Seal material lank - una-n V - Viton Style C - Normally closed 5 Housing material lank - Cartridge only A - Aluminum 5 6 7 8 9 6 Port size Code Port size Housing number Aluminium Coil series lank - No coil J - J Series, W Cartridge only For coil part numbers and dimensions see section C. /8" SPP -756 6T SAE 6 5665 Coil special features G /8" SPP 8767 lank - No coil 6H SAE 6 8767 - No special feature 8H SAE 8 8767 See section J for housing details. 7 Coil voltage - No coil D - VDC D - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. Valve special features lank - None Dimensions mm (inch) Cartridge only Installation drawing 9, HEX (.75) 59, (.) 5. (.) 5, HEX (.) X 7. (.8) 6.5 (.5).8 (.8),7 (.5),875 - THD.,6 (.6) 9.5 (.7) 6.5 (.5) 9. (.75) Ø 5,8 (.6) Ø 8,9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

ESV--C - Proportional valve Proportional flow control, normally closed, poppet Up to L/min (7. USgpm) bar ( psi) Operation In the de-energized position, this valve blocks flow from port to port and free flow is allowed from port to port. In the energized position, flow from port to port is restricted while free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated flow @ 5 psid, 7. gpm min, 8.9 gpm nom Leakage (fully closed) 5 drops/min max @ psi Nominal supply voltage / VDC Current to open valve 8-9 ma (V coil), -5 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (.8 lbs) Seal kit -65889 (una-n), -65888 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally closed, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm 75 7 65 6 55 5 5 5 5 5 5 Pressure Drop At Max Poppet Opening 5 5 5 Pressure Drop - PSID Flow - USgpm 5 5 5 5 5 Flow vs. Current at 5 PSID...6.8...6 Current - Amps - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESV--C - Proportional valve Proportional flow control, normally closed, poppet Up to L/min (7. USgpm) bar ( psi) Model code ESV * C * **** *** * * * ** ** Function ESV - Proportional flow control Size - size Seal material lank - una-n V - Viton Style C - Normally closed 5 Housing material lank - Cartridge only A - Aluminum Dimensions mm (inch) Cartridge only 5 6 7 8 9 6 Port size Code G GU 6G 6GU T Port size Cartridge only /" SPP /" SPP /" SPP /" SPP SAE Housing number Aluminium single -68-66 -67-65 -66 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. TU SAE -66 Coil series T SAE -66 lank - No coil J - J Series, W TU SAE -665 For coil part numbers and See section J for housing details. dimensions see section C. 7 Coil voltage - No coil D - VDC D - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode Installation drawing Coil special features lank - No coil - No special feature Valve special features lank - None 59, (.87) 9, HEX (.75).7 (.5) 7.9 (.87).7 (.5) 5. (.),7 (.76),8 HEX (.5).6 - THD.,6 (.6) 88.9 (.5) 6.5 (.5) 88.9 (.5) 6.5 (.5) X Ø. (.6) 8.7 (.) Ø,75 (.95) Ø 8,9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -5

ESV-8-O - Proportional valve Proportional flow control, normally open, poppet Up to L/min (8. USgpm) bar ( psi) Operation In the de-energized position, this valve allows free flow from port to port and restricts flow from port to port. In the energized position, flow is blocked from port to port, and free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated flow @ 5 psid, 8. gpm min, 9. gpm nom Leakage (fully closed) 5 drops/min, max @ psi Nominal supply voltage / VDC Current to fully close valve -5 ma (V coil), 55-65 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-8- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (. lbs) Seal kit -65875 (una-n), -65877 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally open, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm 5 5 5 5 5 5 Pressure Drop - PSID Flow - USgpm 8 6...6.8...6 Current - Amps -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESV-8-O - Proportional valve Proportional flow control, normally open, poppet Up to L/min (8. USgpm) bar ( psi) Model code ESV 8 * O * ** *** * * * ** * Function ESV - Proportional flow control Size 8-8 size Seal material N - una-n V - Viton Style O - Normally open 5 Housing material lank - Cartridge only A - Aluminum 5 6 7 8 9 6 Port size Code Port size Housing number Coil series lank - No coil S - S Series, W Aluminium For coil part numbers and Cartridge only dimensions see section C. G /8" SPP -678 T 6T 8T SAE SAE 6 SAE 8-67 -67-67 Coil special features lank - No coil - No special feature See section J for housing details. 7 Coil voltage - No coil D - VDC D - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. Valve special features lank - None Dimensions mm (inch) Cartridge only 9, HEX (.75) Installation drawing 6. (.5) 9. (.75) 9. (.75) 6, (.5) 7,8 (.9), HEX (.87),75-6 THD 6, (.) 5.5 (.6) 8. (.5) X 7. 5.8 (.8) (.). (.). (.7) 5.8 (.) Ø,6 (.97) Ø,8 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -7

ESV--O - Proportional valve Proportional flow control, normally open, poppet Up to 7 L/min (8.5 USgpm) bar ( psi) Operation In the de-energized position, this valve allows free flow from port to port and restricts flow from port to port. In the energized position, flow is blocked from port to port, and free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated flow @ 5 psid, 8.5 gpm min, 9. gpm nom Leakage (fully closed) 5 drops/min, max @ psi Nominal supply voltage / VDC Current to fully close valve - ma (V coil), 5-6 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (. lbs) Seal kit 5658 (una-n), -65877 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally open, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm 5 5 5 6 5 8 5 5...6.8...6 5 5 5 Current - Amps Pressure Drop - PSID Flow - USgpm -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESV--O - Proportional valve Proportional flow control, normally open, poppet Up to 7 L/min (8.5 USgpm) bar ( psi) Model code ESV * O * ** *** * * * ** ** 5 6 7 8 9 Function ESV - Proportional flow control Size - size Seal material N - una-n V - Viton Style C - Normally closed 5 Housing material lank - Cartridge only A - Aluminum 6 Port size Code Port size Housing number Aluminium Coil series lank - No coil J - J Series, W Cartridge only For coil part numbers and dimensions see section C. G /8" SPP 8767 6H SAE 6 8767 Coil special features 8H SAE 8 8767 lank - No coil See section J for housing details. - No special feature 7 Coil voltage - No coil - VDC - VDC 8 Type of power lank - No coil D - DC w/o diode - DC w/o diode 9 Connector type lank - No coil G - ISO DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. Valve special features lank - None Dimensions mm (inch) Cartridge only Installation drawing 9, HEX (.75) 7, (.77) 5. (.) X 7. (.8) 6.5 (.5).8 (.8),7 (.5) 5, HEX (.),875 - THD.,6 (.6) 9.5 (.7) 6.5 (.5) 9. (.75) Ø 5,8 (.6) Ø 8,9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -9

ESV--O - Proportional valve Proportional flow control, normally open, poppet Up to L/min (7. USgpm) bar ( psi) Operation In the de-energized position, this valve allows free flow from port to port and restricts flow from port to port. In the energized position, flow is blocked from port to port, and free flow is allowed from port to port. The valve flow is proportional to the current applied to the coil. Features Hardened and ground working parts to give long life and very low leakage. IP69K Tough coil compatibility, continuously rated. Compact design with low pressure drop. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Rated flow @ 5 psid, 7. gpm min, 8.9 gpm nom Leakage (fully closed) 5 drops/min max @ psi Nominal supply voltage / VDC Current to fully close valve 8-9 ma (V coil), -5 ma (V coil) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis USgpm with dither Weight cartridge only. kg (. lbs) Seal kit -65889 (una-n), -65888 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated poppet type, normally open, proportional flow control screw in cartridge valve. Ideal for lowering circuits or in conjunction with pressure compensators to provide proportional flow control to any actuator. Pressure drop curves Flow - USgpm 75 7 65 6 55 5 5 5 5 5 5 5 5 5 Pressure Drop - PSID Flow - USgpm 5 5 5 5 Flow vs. Current at 5 PSID...6.8...6 Current - Amps Flow - L/min - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESV--O - Proportional valve Proportional flow control, normally open, poppet Up to L/min (7. USgpm) bar ( psi) Model code ESV * O * ** ** * * * ** ** Function ESV - Proportional flow control Size - size Seal material lank - una-n V - Viton Style O - Normally open 5 Housing material lank - Cartridge only A - Aluminum 5 6 7 8 9 6 Port size 9 Connector type Code Port size Housing number lank - No coil G - ISO DIN 65 Aluminium Q - Spade Terminals 6G 6GU T TU T Cartridge only /" SPP /" SPP SAE SAE SAE -67-65 -66-66 -66 W -Flying Lead N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions see section C. TU SAE -665 Coil series See section J for housing details. lank - No coil J - J Series, W 7 Coil voltage 8 Type of power For coil part numbers and dimensions see section C. - No coil -VDC - VDC lank - No coil D - DC w/o diode - DC w/o diode Coil special features lank - No coil - No special feature Dimensions mm (inch) Valve special features lank - None Cartridge only Installation drawing 7, (.87) 9, HEX (.75).7 (.5) 7.9 (.87).7 (.5) 5. (.),8 HEX (.5) 88.9 (.5) 6.5 (.5) 8.7 (.),7 (.76).6 - THD.,6 (.6) 6.5 (.5) 88.9 (.5) X Ø. (.6) Ø,75 (.95) Ø 8,9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

EFV--C - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Profile view Operation The valve is controlled by current supplied to the coil. At zero current, the valve is fully closed from port to port. At 5 ma (V coil) the valve is considered fully open. This is the maximum intended current level for use in applications. Port is used for pressure balancing the spool and armature and must be blocked in all cases. The maximum intended pressure drop is PSID. At pressure drops above PSID, almost no increase in flow is obtained. The intended flow direction is from port to port. Operation of the valve with flow from port to port will produce flow vs current and flow vs pressure drop curves that are significantly different from those obtained with flow from port to port. Since the spool and armature are pressure balanced, the operating pressure does not affect the operating characteristics of the valve. The operating point of the valve is determined only by current, pressure drop and temperature. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Description This is a way position, pilot operated spool type, normally closed, proportional flow control screw in cartridge valve. Ideal for speed control and in conjunction with pressure compensators to provide proportional pressure compensated flow control to any actuator. Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure Cartridge endurance rating Cartridge fatigue pressure (infinite life) Rated flow Internal leakage Nominal supply voltage Current to fully close valve Recommended PWM frequency Coil resistance Mass Temperature range Maximum oil temperature Maximum internal coil temperature Cavity bar ( psi) million cycles bar ( psi) NFPA rated Flow rating A 5. L/min ( USgpm) Flow rating. L/min (8 USgpm) Flow rating C 7.9 L/min ( USgpm) 97 cm /min (in /min) @ PSID / V 5-6 ma (V coil), 75-8 ma (V coil) - Hz.7v V/V, 9.V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut,7 kg (.6 lb) - to 9 C (- to 9 F) C (8 F) C (9 F) C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE, SAE, DTE, etc. Fluids Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis USgpm with Hz PWM driver Seal kit 995- (una-n), 996- (Viton ) Viton is a registered trademark of E.I. DuPont - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--C - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Max Flow vs. Pressure drop Flow rating A at zero current Flow - USgpm Pressure Drop - bar. 6.9..8 7..7 6-6 - 5 8 6 - - - 5 5 5 - Pressure Drop - PSID Flow - L/min Max Flow vs. Pressure drop Flow rating at zero current Flow - USgpm Pressure Drop - bar. 6.9..8 7..7 6-6 - 5-8 - 6 - - 5 5 5 Pressure Drop - PSID Flow - L/min Max Flow vs. Pressure drop Flow rating C at zero current Flow - USgpm Pressure Drop - bar 6. 6.9..8 7..7-6 - 5-8 - 6 - - 5 5 5 Pressure Drop - PSID Flow - L/min Flow vs. Current Flow % 75 5 5 6 8 6 Current - ma Note: To determine operating characteristics for the flow rating selected, at a specific differential pressure, first determine maximum flow from upper curve at the differential pressure value. This will be the % flow on the lower curve. Parameters: Hz PWM Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

EFV--C - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Model Code EFV * C * * * *** *****E** 5 6 7 8 9 Function EFV - Electro proportional flow control valve 6 Manual override option - No core tube special features S - Screw-in 7 Valve housing material lank - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils * These model digits will not be stamped on the valve. Size - size 8 Port size For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton Logic C - Normally closed Code Port size Housing number Aluminium single Steel single Cartridge only /8" SPP -758* 6T SAE 6 5666* -75 8T SAE 8-755 G /" SPP 87675-757 Special features - None Only required when valve has special features, omitted if. 5 Flow rating A - USgpm @ 6 PSID - 8 USgpm @ 6 PSID C - USgpm @ 6 PSID G /8" SPP 8767-758 6H SAE 6 8767 8H SAE 8 8767 Note: oth the manifold and port plug are required. See section J for housing details. *Aluminum Light duty. - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--C - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S - 68-75 Nm (5-55 ft lbs) A - 7-5 Nm (5- ft lbs) Note: S type manual override shown. DIN 65 connector shown. Note: Port is unused and must be plugged. Cartridge only, (.7),8 (.9), (.6) 8,5 (.7) 8,5 (.7), (.8) 86, (.) 6, (.5) 6,7 (.) 7, (.86) Installation drawing (Aluminum) 86. (.),6 (.97) 5, (.) 8,8 (.7) 57. (.5) X7, (.8),8 (.7) 75, (.97) 5 (.97) 9.5 (.8) 57.5 (.5) 75. (.97) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -5

EFV--C - Proportional valve Proportional flow, normally closed spool Up to 77 L/min (.6 USgpm) bar ( psi) Profile view Operation The valve is controlled by current supplied to the coil. At zero current, the valve is fully closed from port to port. At 5 ma (V coil) the valve is considered fully open. This is the maximum intended current level for use in applications. Port is used for pressure balancing the spool and armature and must be blocked in all cases. The maximum intended pressure drop is PSID. At pressure drops above PSID, almost no increase in flow is obtained. The intended flow direction is from port to port. Operation of the valve with flow from port to port will produce flow vs current and flow vs pressure drop curves that are significantly different from those obtained with flow from port to port. Since the spool and armature are pressure balanced, the operating pressure does not affect the operating characteristics of the valve. The operating point of the valve is determined only by current, pressure drop and temperature. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Description This is a way position, pilot operated spool type, normally closed, proportional flow control screw in cartridge valve. Ideal for speed control and in conjunction with pressure compensators to provide proportional pressure compensated flow control to any actuator. Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated Flow rating A 55 L/min (. USgpm) Rated flow Flow rating 77 L/min (.6 USgpm) Internal leakage (fully closed) 77-8 cm /min (5- in /min) @ bar ( PSID) Nominal supply voltage / V Current to fully close valve 5-6 ma (V coil), 75-8 ma (V coil) Recommended dither frequency - Hz Coil resistance.7v V/V, 9.V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut Mass,7 kg (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE Fluids, SAE, DTE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis USgpm with Hz PWM driver Seal kit 997- (una-n), 997- (Viton ) Viton is a registered trademark of E.I. DuPont -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--C - Proportional valve Proportional flow, normally closed spool Up to 77 L/min (.6 USgpm) bar ( psi) Max flow vs. Pressure drop Flow rating A at zero current Max flow vs. Pressure drop Flow rating at zero current Flow vs. Current Flow - USgpm Pressure Drop - bar. 6.9..8 7..7 6-6 - 5-8 FPO - 6 - - 5 5 5 Pressure Drop - PSID Flow - L/min Note: To determine operating characteristics for the flow rating selected, at a specific differential pressure, first determine maximum flow from upper curve at the differential pressure value. This will be the % flow on the lower curve. Parameters: Hz PWM Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -7

EFV--C - Proportional valve Proportional flow, normally closed spool Up to 77 L/min (.6 USgpm) bar ( psi) Model code EFV * C * * * *** *****E** 5 6 7 8 9 Function EFV - Electro proportional flow control valve Size - size 6 Manual override option - No core tube special features S - Screw-in 8 Port size 7 Valve housing material lank - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils *These model digits will not be stamped on the valve. For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton Logic C - Normally closed Code Port size Housing number Aluminium single Steel single Cartridge only G /" SPP -687-6985 6G /" SPP -686-698 T SAE -66-67 T SAE -666-6986 Special features - None Only required when valve has special features, omitted if. 5 Flow rating A -. USgpm @ PSID -.6 USgpm @ PSID Note: oth the manifold and port plug are required. See section J for housing details. -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--C - Proportional valve Proportional flow, normally closed spool Up to 77 L/min (.6 USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in steel housing S - 6-9 Nm (- ft lbs) A - 8- Nm (8-9 ft lbs) Note: Port is unused and must be plugged. Note: EFV- with DIN-65 connector shown. Cartridge only Installation drawing (Aluminum), (.7),8 (.9) 9, (.75) 5. (.) 86... (.6).7 (.5) 5. (.) 86, (.) 6, (.5) 8.7 (.) 8 (.5) 8.55 (.5).5 (.75) 76. (.) 88.9 (.5) 5.6 (.).6 68,6 (.7) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -9

EFV--O - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Profile view Operation The valve is controlled by current supplied to the coil. At zero current, the valve is fully open from port to port. At 5 to 6 ma (V coil) the valve is fully closed. Port is used for pressure balancing the spool and armature and must be blocked in all cases. The maximum intended pressure drop is PSID. At pressure drops above PSID, almost no increase in flow is obtained. The intended flow direction is from port to port. Performance data Operation of the valve with flow from port to port will produce flow vs current and flow vs pressure drop curves that are significantly different from those obtained with flow from port to port. Since the spool and armature are pressure balanced, the operating pressure does not affect the operating characteristics of the valve. The operating point of the valve is determined only by current, pressure drop and temperature. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated Flow rating A 5. L/min ( USgpm) Flow rating. L/min (8 USgpm) Rated flow Flow rating C 7.9 L/min ( USgpm) Internal leakage 97 cm /min (in /min) @ ( PSID) Nominal supply voltage / V Current to fully close valve 5-6 ma (V coil), 75-8 ma (V coil) Recommended PWM frequency - Hz Coil resistance.7v V/V, 9.V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut Mass,7 kg (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, Fluids SAE, SAE, DTE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis USgpm with Hz PWM driver Seal kit 995- (una-n), 996- (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a way position, pilot operated spool type, normally open, proportional flow control screw in cartridge valve. Ideal for speed control and in conjunction with pressure compensators to provide proportional pressure compensated flow control to any actuator. Pressure drop curves USgpm Flow - 6. 6.9..8 7..7 6 5 8 6 5 5 5 Pressure Drop - PSID L/min Flow - USgpm Flow - 6. 6.9..8 7..7 6 5 8 6 5 5 5 Pressure Drop - PSID L/min Flow - - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Flow % EFV--O - Proportional Valve Up to 8 L/min ( USgpm) bar ( psi) Performance Curves Max. flow vs Pressure drop Flow rating A (Valve fully open) Max. flow vs Pressure drop Flow rating (Valve fully open) USgpm Flow - Pressure Drop - bar 6. 6.9..8 7..7 6 5 8 6 5 5 5 Pressure Drop - PSID L/min Flow - USgpm Flow - Pressure Drop - bar 6. 6.9..8 7..7 6 5 8 6 5 5 5 Pressure Drop - PSID L/min Flow - Max. Flow flow vs vs Pressure Drop drop Flow rating C "C" (Valve fully open) Flow vs. Current USgpm Flow - Pressure Drop - bar 6. 6.9..8 7..7 6 5 75 8 5 6 5 6 8 6 5 5 5 Current - ma Pressure Drop - PSID Note: Note: To To determine operating operating characteristics for the flow rating selected, at a specific differential characteristics for the flow pressure, first determine maximum flow from upper curve at rating the differential selected, pressure at a specific value. This will be the % differential flow flow pressure, on the lower first curve. determine maximum flow from upper curve at the differential pressure Hz PWMvalue. Parameters: This will be the % flow flow on the lower curve. L/min Flow - Parameters: Hz PWM Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

EFV--O - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Model code EFV * * * * *** *****E** 5 6 7 8 9 Function EFV - Electro proportional flow control valve 6 Manual override option - No core tube special features S - Screw-in 7 Valve housing material lank - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils * These model digits will not be stamped on the valve. Size - size 8 Port size For coil part numbers and dimensions see section C. Code Port size Housing number Seal material N - una-n V - Viton Aluminium single Steel single Cartridge only /8" SPP -758* 6T SAE 6 5666* -75 Special features - None Only required when valve has special features, omitted if. Logic - Normally open 8T SAE 8-755 G /8" SPP 8767-758 6H SAE 6 8767 5 Flow rating A - USgpm @ 6 PSID - 8 USgpm @ 6 PSID C - USgpm @ 6 PSID 8H SAE 8 8767 Note: oth the manifold and port plug are required. See section J for housing details. *Aluminum Light duty. - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--O - Proportional valve Proportional flow, normally open, poppet Up to 8 L/min ( USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S - 68-75 Nm (5-55 ft lbs) A - 7-5 Nm (5- ft lbs) Note: S type manual override shown. DIN 65 connector shown. Note: Port is unused and must be plugged. Cartridge only, (.7),8 (.9), (.6) 8,5 (.7) 8,5 (.7), (.8) 86, (.) 6, (.5) 6,7 (.) 7, (.86) Note: EFV- with DIN-65 connector Note: Port is unused and must be plugged. Note - S type manual override shown Installation drawing (Aluminum) 86. (.),6 (.97) 5, (.) 8,8 (.7) 57. (.5) X7, (.8),8 (.7) 75, (.97) 5 (.97) 9.5 (.8) 57.5 (.5) 75. (.97) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -

EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min (7.5 USgpm) bar ( psi) Profile view Operation The valve is controlled by current supplied to the coil. At zero current, the valve is fully open from port to port. At 5 to 6 ma (V coil) the valve is fully closed. Port is used for pressure balancing the spool and armature and must be blocked in all cases. The maximum intended pressure drop is PSID. At pressure drops above PSID, almost no increase in flow is obtained. The intended flow direction is from port to port. Operation of the valve with flow from port to port will produce flow vs current and flow vs pressure drop curves that are significantly different from those obtained with flow from port to port. Since the spool and armature are pressure balanced, the operating pressure does not affect the operating characteristics of the valve. The operating point of the valve is determined only by current, pressure drop and temperature. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Performance data Ratings and specifications Description This is a way position, pilot operated spool type, normally open, proportional flow control screw in cartridge valve. Ideal for speed control and in conjunction with pressure compensators to provide proportional pressure compensated flow control to any actuator. Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated Flow rating A 95 L/min (5 USgpm) Rated flow Flow rating L/min (7.5 USgpm) Internal leakage (fully closed) 77-8 cm /min (5- in /min) @ bar ( PSID) Nominal supply voltage / V Current to fully close valve 5-6 ma (V coil), 75-8 ma (V coil) Recommended PWM frequency - Hz Coil resistance.7v V/V, 9. V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut Mass,7 kg (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE Fluids, SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis USgpm with Hz PWM driver Seal kit 997- (una-n), 997- (Viton ) Viton is a registered trademark of E.I. DuPont - Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Flow % EFV--O - Proportional valve Up to L/min (7.5 USgpm) bar ( psi) Performance Curves Max. flow vs Pressure drop Flow rating A (Zero Current) Max. flow vs Pressure drop Flow rating (Zero Current) Flow - USgpm Pressure Drop - bar 5 5 5 5 5 8 6 Flow - L/min Flow - USgpm Pressure Drop - bar 5 5 5 5 5 8 6 Flow - L/min 5 5 5 Pressure Drop - PSID 5 5 5 Pressure Drop - PSID Flow vs Current 75 5 5 Note: To determine operating characteristics for the flow rating selected, at a specific differential pressure, first determine maximum flow from upper curve at the differential pressure value. This will be the % flow on the lower curve. Parameters: Hz PWM 6 8 6 Current - ma Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -5

EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min (7.5 USgpm) bar ( psi) Model code EFV * * * * *** *****E** 5 6 7 8 9 Function EFV - Electro proportional flow control valve 6 Manual override option - No core tube special features S - Screw-in 7 Valve housing material lank - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils * These model digits will not be stamped on the valve. Size - size 8 Port size For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton Logic - Normally open Code Port size Housing number Aluminium single Steel single Cartridge only G /" SPP -687-6985 6G /" SPP -686-698 T SAE -66-67 T SAE -666-6986 Special features - None Only required when valve has special features, omitted if. 5 Flow rating A - 5. USgpm @ PSID - 7.5 USgpm @ PSID Note: oth the manifold and port plug are required. See section J for housing details. -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--O - Proportional Valve Proportional flow, normally open spool Up to L/min (7.5 USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S - 6-9 Nm (- ft lbs) A - 8- Nm (8-9 ft lbs) Note: Port is unused and must be plugged. Note: EFV- with DIN- 65 connector shown. Cartridge only, (.7),8 (.9) 9, (.75).6 86, (.) 6, (.5) 68,6 (.7) Installation drawing (Aluminum) 5. (.) 86... (.6).7 (.5) 5. (.) 8.7 (.) 8 (.5) 8.55 (.5) 5.6 (.).5 (.75) 76. (.) 88.9 (.5) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -7

ESV9-8-E - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (.9 USgpm) Up to 5 bar (6 psi) COIL COIL A Operation In the de-energized (center) position, all ports are blocked. When solenoid A is energized, flow is directed from port to port and from port to port. Port is not intended to be used as an inlet. When solenoid is energized, flow is directed from port to port and from port to port. Port is not intended to be used as an inlet. Features Highly engineered components Compact design with low pressure drop Designed for optimized linearity and hysteresis IP69K ToughCoils compatible Optional manual override Industry standard cavity tool Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) "COIL " Typical application pressure Operating Pressure Port (T) Operating Pressure Port, and (A, P and ) bar (, psi) 5 bar (,6 psi) Cartridge fatigue pressure (infinite life) Port (T) Port, and (A, P and ) bar (, psi) 5 bar (,6 psi) Rated burst pressure 75 bar (,6 psi) per NFPA/T-6- R- Rated flow. L/min (.9 USgpm) "COIL A Temperature range - to C (- to 8 F) Coil power W* Maximum hysteresis 7.% Step response 7 ms to 9% flow Cavity C-8- Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Standard housing material Steel Weight including coils.5 kg (. lbs) Seal kit -6757 (una-n), -6758 (Viton ) Internal leakage 65 cm /min ( in /min) max. @ bar ( psi) Viton is a registered trademark of E.I. DuPont. *AC coils must be used with a rectifying connector. Description The ESV9 with E spool is a proportional four-way, three-position, direct acting, spool type solenoid valve with all ports closed in the de-energized position. This valve is ideal for moderate flow applications where an actuator needs to be controlled proportionally in both directions and stopped in any position. Pressure drop 8 6 A C D Flow vs. Current at bar P 8 6 8 - -5 - -5 5 5 A - Port to port - Port to port 8 6 C - Port to port D - Port to port Coil A Coil -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESV9-8-F - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (.9 USgpm) Up to 5 bar (6 psi) COIL COIL A Operation In the de-energized (center) position, port, port, and port are open to each other while port is blocked. When solenoid A is energized, flow is directed from port to port and from port to port. When solenoid is energized, flow is directed from port to port and from port to port. Features Highly engineered components Compact design with low pressure drop Designed for optimized linearity and hysteresis IP69K ToughCoils compatible Optional manual override Industry standard cavity tool. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) "COIL " Typical application pressure Operating Pressure Port (T) Operating Pressure Port, and (A, P and ) bar (, psi) 5 bar (,6 psi) Cartridge fatigue pressure (infinite life) Port (T) Port, and (A, P and ) bar (, psi) 5 bar (,6 psi) Rated burst pressure 75 bar (,6 psi) per NFPA/T-6- R- Rated flow. L/min (.9 USgpm) "COIL A Temperature range Coil power - to C (- to 8 F) W** Maximum hysteresis 7.% Step response 7 ms to 9% flow Cavity C-8- Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Standard housing material Steel Weight including coils. kg (. lbs) Seal kit -6757 (una-n), -6758 (Viton ) Internal leakage 5 cm /min (5 in /min) max. @ bar ( psi) Viton is a registered trademark of E.I. DuPont. Description The ESV9 with F spool is a proportional four way, three position, direct acting, spool type solenoid valve. In the de-energized condition Port and are open to tank with the inlet port blocked. This valve is ideal for moderate flow applications where an actuator needs to be moved in both directions and stopped in any position while allowing the service ports to decay to tank pressure in the de-energized condition. Pressure drop 5 5 5 F D E 5 5 5 A - Port or port energized - Port to port energized C - Port or port energized D - Port to port de-energized A C E - Port to port energized F - Port to port de-energized Flow vs. Current at bar P Flow(lpm)/Pressure(bar) Flow(lpm)/Pressure(bar) Coil 6 8 6 Current (A) Coil A -.8 -.6-. -. - -.8 -.6-. -. -.-..6.8...6.8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -9

ESV9-8 - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (.9 USgpm) Up to 5 bar (6 psi) Model code ESV9 8 * * * *** **** * * ** ** A 5 6 7 8 9 Function ESV9 - Proportional solenoid valve Size 8-8 size Spool center condition E COIL COIL A F COIL COIL A 9 Coil series lank - No coil P - P Series ToughCoils W Coil special feature - None Seal material lank - una-n V - Viton 5 Manual override option - No manual override M - Manual override, push pull type For valve dimensions with manual override, see pages 87. 6 Housing material and ports Code Port size Housing number Aluminium Steel Cartridge only AG / SPP -677 AG /8 SPP -678 A6H SAE 6-679 A8H SAE 8-675 SG / SPP -675 SG /8 SPP -675 S6T SAE 6-675 S8T SAE 8-675 See section J for housing details. Valve special features - None (Only required if valve has special features omitted if.) Design code A - Design code These model digits are not stamped on the valve. Warning Aluminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). 7 Coil voltage and type - No coil D - V DC without diode D - V DC without diode - V DC with diode - V DC with diode 8 Connection type lank - No coil N - Deutsch male, DT-P, integrated G - DIN 65 W - Flying lead Y - Amp Jr (DC Only) Mating Connector: AMP 96- or equivalent D - MetriPackR 5 Male, Integrated (DC Only) Mating Connector: Delphi 56 See Section C for coil details. -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESV9-8 - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (.9 USgpm) 5 bar ( psi) Dimensions mm (inch) Torque cartridge in aluminum housing - Nm (5. -. ft. lbs.) and - Nm (5. -. ft. lbs.) in a steel housing ESV9-8 without MO. [.6] ESV9-8 with MO. [.6 ] When solenoid valve is ordered without coils, it will be supplied with coil spacer and coil nut. n.8 [.5] n.8 [.5] Spare parts Coil Nut for MO 565559 "COIL ". [ 5.6 ] "COIL " Coil Nut without MO 565558.97 [.8 ] Coil Spacer -867 "COIL A" "COIL A" Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on coil nut. Over tightening may cause valve failure. 5.5 [.5]. HEX A/F [.87] /-6 UNF-A THD 5.5 [.5]. HEX A/F [.87].75-6 UNF-A THD Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -5

ESV9- - Proportional solenoid valve -way, -position, screw-in cartridge, proportional solenoid valve Up to L/min (5.8 USgpm) Up to 5 bar (6 psi) Model code ESV9 * * * *** **** * * ** ** A Function ESV9 - Proportional solenoid valve Size - size Spool center condition E COIL COIL A F 5 COIL 6 7 8 COIL A 9 9 Coil series lank - No coil L - L Series Large ToughCoils 8 W Coil special feature - None Seal material lank - una-n V - Viton 5 Manual override option - No manual override M - Manual override, push pull type For valve dimensions with manual override, see pages 87. 6 Housing material and ports Code Port size Housing number Aluminium Steel Cartridge only AG / SPP -858 AG /8 SPP -8585 A6H SAE 6-858 A8H SAE 8-858 SG / SPP -759 SG /8 SPP -75 S6T SAE 6-757 S8T SAE 8-758 See section J for housing details. Valve special features - None (Only required if valve has special features omitted if.) Design code A - Design code These model digits are not stamped on the valve. Warning Aluminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). 7 Coil voltage and type - No coil D - V DC without diode D - V DC without diode - V DC with diode - V DC with diode 8 Connection type lank - No coil N - Deutsch male, DT-P, integrated G - DIN 65 W - Flying lead Y - Amp Jr (DC Only) Mating Connector: AMP 96- or equivalent D - MetriPackR 5 Male, Integrated (DC Only) Mating Connector: Delphi 56 See Section C for coil details. -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESVL9--E - Proportional solenoid valve 5 Port, -position, screw-in cartridge, proportional solenoid valve Up to L/min (6 USgpm) Up to 5 bar (6 psi) With Load Sense check valve Without Load Sense check valve Operation In the de-energized (center) position, all ports are blocked. When solenoid A is energized, flow is directed from port 5 to port and from port to port. Port is connected to system load sense line. When solenoid is energized, flow is directed from port 5 to port and from port to port. Port is connected to system load sense line. Features Integrated LS check feature in std. cavity Highly engineered components Compact design with low pressure drop Designed for optimized linearity and hysteresis IP69K ToughCoils compatible Optional manual override Industry standard cavity tool Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure for all ports 5 bar (,6 psi) Cartridge fatigue pressure (infinite life) for all ports 5 bar (,6 psi) Coil Rated burst pressure 75 bar (,6 psi) per NFPA/T-6- R- Max. flow L/min (6 USgpm) Temperature range - to C (- to 8 F) Coil power 8 W* Coil A Recommended PWM and Dither frequency Cavity Hz C--5S Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ 5 Standard housing material Steel Weight including coils with check valve.5 KG Seal kit 996- (una-n), 996- (Viton ) Internal leakage 5 cm /min (5 in /min) max. @ bar ( psi) Viton is a registered trademark of E.I. DuPont. *AC coils must be used with a rectifying connector. Description The ESVL9 with E spool is a proportional 5 ported, three-position, direct acting, spool type solenoid valve with all ports closed in the de-energized position. This valve is ideal for moderate flow applications where an actuator needs to be controlled proportionally in both directions and stopped in any position. Pressure Drop - ar Pressure drop 8 6 Flow - LPM A - Port 5 to port - Port 5 to port A C D 8 6 Flow in LPM C - Port to port D - Port to port Flow vs. Current at bar P Coil 8 6 8 - -5 - -5 5 5 Current in ma Coil A Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -5

ESVL9--F - Proportional solenoid valve 5 Port, -position, screw-in cartridge, proportional solenoid valve Up to L/min (6 USgpm) Up to 5 bar (6 psi) With Load Sense check valve Without Load Sense check valve Operation In the de-energized (center) position, port, port, and port are open to each other while port 5 is blocked. When solenoid A is energized, flow is directed from port 5 to port and from port to port. When solenoid is energized, flow is directed from port 5 to port and from port to port. Port is connected to system load sense line Features Integrated LS check feature in std. cavity Highly engineered components Compact design with low pressure drop Designed for optimized linearity and hysteresis IP69K ToughCoils compatible Optional manual override Industry standard cavity tool. Performance data Profile view Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure for all ports 5 bar (,6 psi) Cartridge fatigue pressure (infinite life) for all ports 5 bar (,6 psi) Rated burst pressure 75 bar (,6 psi) per NFPA/T-6- R- Coil Max. flow L/min (6 USgpm) Temperature range - to C (- to 8 F) Coil power 8 W* Recommended PWM and Dither frequency Hz Coil A Cavity Fluids C--5S All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Standard housing material Steel 5 Weight including coils with check valve.5 KG Seal kit 996- (una-n), 996- (Viton ) Internal leakage 5 cm /min (5 in /min) max. @ bar ( psi) Viton is a registered trademark of E.I. DuPont. *AC coils must be used with a rectifying connector. Description The ESV9 with F spool is a proportional 5 ported, three position, direct acting, spool type solenoid valve. In the de-energized condition Port and are open to tank with the inlet port 5 blocked. This valve is ideal for moderate flow applications where an actuator needs to be moved in both directions and stopped in any position while allowing the service ports to decay to tank pressure in the de-energized condition. Pressure Drop - ar Pressure drop 8 6 A C D 8 6 Flow - LPM A - Port 5 to port - Port 5 to port Flow in LPM C - Port to port D - Port to port Flow vs. Current at bar P Coil 8 6 8 - -5 - -5 5 5 Current in ma Coil A -5 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ESVL9- - Proportional solenoid valve 5 Port, -position, screw-in cartridge, proportional solenoid valve Up to L/min (6 USgpm) Up to 5 bar (6 psi) Model code ESVL9 * * * *** **** * * ** * A 5 6 7 8 9 Function ESVL9 - Proportional solenoid valve Spool center condition E F 9 Coil series lank - No coil L - L Series Large ToughCoils 8 W Size - size Coil special feature - None Seal material lank - una-n V - Viton 5 Manual override option - No manual override M - Manual override, push pull type For valve dimensions with manual override, see pages 87. Valve special features - None C - With valve check E 6 Housing material and ports Code Port size Housing number Aluminium Steel Cartridge only SG /8 SPP 69- See section J for housing details. F 7 Coil voltage and type - No coil D - V DC without diode D - V DC without diode - V DC with diode - V DC with diode 8 Connection type lank - No coil G - DIN 65-A Integrated N - Deutsch male, DT-P, Integrated D - Metric - Pack 5 male, Integrated F - Weather - Pack (packard) male, on wire leads W - Lead wire Y - AMP Junior, Integrated See Section C for coil details. (Only required if valve has special features omitted if.) Design code A - Design code These model digits are not stamped on the valve. Warning Aluminum housings can be used for pressures up to bar ( psi). Steel housings must be used for operating pressures above bar ( psi). Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -55

ESVL9- - Proportional solenoid valve 5 Port, -position, screw-in cartridge, proportional solenoid valve Up to L/min (6 USgpm) Up to 5 bar (6 psi) Dimensions mm (inch) Torque cartridge in aluminum housing 5- Nm (5. -. ft. lbs.) and - Nm (5. -. ft. lbs.) in a steel housing ESVL9- without MO n.8 [5.9] ESVL9- with MO n.8 [5.9] When solenoid valve is ordered without coils, it will be supplied with coil spacer and coil nut..7 [.6].7 [.6].6 [.7] 7.5 [.69] n5.8 [.] TORQUE 5-8 N.M [-6 lbf-ft].8 [.9].6 [.7].5 HEX A/F [.875] TORQUE 5.-8. N.M [-6 lbf-ft] n 5.9 [.8] n5.9 [.8] Spare parts Coil Nut for MO 688- Coil Nut without MO -8 8.7 [5.6] 5. [5.7] Coil Spacer 689-5. HEX A/F [.] Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. 8.9 [.] 78.7 [.] HEX A/F [5.] 7/8- UNF A 8.9 [.] 78.7 [.] 7/8- UNF A n. -. [8. -8.6 ] "LS/" n. -. [ 8. -8.6 ] "LS/" -56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Sectional view (out) (in) Description This is a compact ported proportional, pressure compensated, spool type flow regulator. Ideal for speed regulation of actuators in many applications. Operation In the de-energized condition the valve is closed. As current is applied to the coil the valve opens proportionally allowing flow from port to port. Performance data PFRA - Proportional valve Proportional bi-directional, normally closed poppet 8 L/min at 75% bar ( psi) Features High flow capacity with reduced space requirements. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Reversible coil without affecting performance. Ratings and specifications Performance data is typical with fluid at cst (5 SUS) Max inlet pressure bar ( psi) Rated flow 8 L/min @ %, L/min @ 85%, 8 L/min@ 75% Hystersis 8% maximum without PWM, % maximum with PWM Frequency Hz to Hz - recommended Dead band 5-5% of rated current Response time ms Internal leakage Up to ml/min, bar differential Temperature range - to C (- to 8 F) Cavity A67 (see section M) Electrical data See coil data sheet Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted All general purpose hydraulics fluids such as: MIL-H-566, SAE Fluids, SAE, etc Seal Material Standard nitrile with PTFE back up rings Filtration S55/ Class 6/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials Aluminium alloy Coil Weight. kg (.6 lbs) Weight. kg (. lbs) Seal kit SK8 (Nitrile) SK8V (Viton ) Viton is a registered trademark of E.I. DuPont Pressure drop curves Pressure differential - bar Pressure - psi 6 88 6 7 7.5 5 6 Flow - US gpm 5 5 5 8 Pressure - bar Flow - litres/min 5 9. 7.9 5 6.6 5. 5.9.6 5. 6 8 % rated amps Flow US gpm Flow - US gpm 9. 7.8 6.5 5..9.6. 6 8 5 % of rated amps 5 75% of rated amps 5 5% of rated amps 5 87 9 Pressure - psi Flow - l/min Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -57

PFRA - Proportional Valve Proportional bi-directional, normally closed poppet 8 L/min at 75% bar ( psi) Model code PFR A N 6 H W Function PFR A - Cartridge only Seal material N - Nitrile V - Viton Manual override 6 - Screw Coil termination H - DIN65 F - Flying Lead DM - Deutsch moulded Other terminations available on request. 5 Voltage - VDC - VDC 5 6 6 Port size Code Port size Housing number Aluminium Cartridge only W /" SP A59 W /8" SP A75 6T /8" SAE A955 See section J for housing details. Dimensions mm (inch) Cartridge only Installation drawing 7. (.8) 9. (.9). (.8) 5. A/F. A/F 5.5 (.) 5. (.97) 9. (.6) 5. (.97) holes Ø6.8 (.7) thro 6. (.6). (.87) 6. (.) 6. (.) 9. (.75).8 (.5) 5.9 (.6).8 (.5) 5.8 (.. A/F 7.8 (.9) 6.9 (.66) / -6-UNF-A Ø5.8 (.6) -58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--C - Proportional valve Proportional flow, normally closed spool Up to L/min ( USgpm) bar ( psi) Operation Current supplied to the coil controls the valve. At zero current, the valve is fully closed from port to port. At 5 to 6 ma (V coil) the valve is fully open. The valve will regulate flow out of port regardless of downstream system pressure. As current is increased to the solenoid the flow out of port will increase. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Performance data Sectional view Description This is a three port pressure compensated proportional normally closed flow control screw in cartridge valve. The valve can be used as a priority or a restrictive style valve allowing the valve to control the outlet flow with the option of the excess flow being used for another system. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated Rated flow A Spool-max regulated flow (by-pass mode): 57 L/min (5 USgpm) max regulated flow ( port mode): 5 L/min ( USgpm) max input flow (input flow): L/min ( USgpm) Spool-max regulated flow (by-pass mode): 8 L/min ( USgpm) max regulated flow ( port mode): L/min (8 USgpm) max input flow (input flow): L/min ( USgpm) Note: Max regulated flow may decrease slightly during compensation. Internal leakage (fully closed) cm /min (5 in /min) @ PSID Nominal supply voltage / V Current to fully open valve 6 6 ma (V coil), 8 6 ma (V coil) Current to fully close valve 5 6 ma (V coil), 75 6 5 ma (V coil) Recommended PWM frequency - Hz Coil resistance.7v V/V, 9. V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut,7 kg Mass (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE, SAE Fluids, DTE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis.5 USgpm with Hz PWM driver Seal kit 997- (una-n), 997- (Viton ) Viton is a registered trademark of E.I. DuPont Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -59

EFV--C - Proportional valve Up to L/min ( USgpm) bar ( psi) Performance Curves Flow is Pressure drop Flow vs Pressure drop Excess flow P to P (P to Atm) Full current (7 ma on a V Coil) Pressure Drop psi 5 5 5 5 5 5 Flow-US gpm 5 Flow vs Pressure drop Regulated flow P to P (P to Atm) Full current (7 ma on a V Coil) Pressure Drop - psi 8 5 5..5 5. A 7.5. Flow-US gpm.5 5. 7.5 Flow vs Current A - A spool pressure drop - spool pressure drop Flow (GPM) 8 6 y-pass Mode 8 6 A Port Mode 6 8 6 7 Current (ma) Port Mode y-pass Mode A - A spool - spool Regulated flow vs Pressure Regular to ypass Flow-US gpm. 7.5 G 5..5 E F. D 7.5 5. C.5. A 5 5 5 5 Pressure - psi A -. AMPS -.6 AMPS C -.9 AMPS D -. AMPS E -.5 AMPS F -.8 AMPS G -. AMPS Regulated flow vs Pressure ypass to Regular Flow-US gpm. 7.5 G 5. F.5 E. 7.5 D 5. C.5. A 5 5 5 5 Pressure - psi A -. AMPS -.6 AMPS C -.9 AMPS D -. AMPS E -.5 AMPS F -.8 AMPS G -. AMPS Note: Pressure Compensation curves are shown for spool valves. -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--C - Proportional valve Proportional flow, normally closed spool Up to L/min ( USgpm) bar ( psi) Model code EFV * C * * * *** *****E** Function EFV - Electro proportional flow control valve Size - size 5 6 7 6 Manual override option - No core tube special features S - Screw-in 8 Port Size 7 Valve housing material - Cartridge only A - Aluminum S - Steel 8 9 9 Coil series E - E series coils * These model digits will not be stamped on the valve. For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton Code Port size Housing number Aluminium single Steel single Cartridge only G /" SPP -687-6985 Special features - None Only required when valve has special features, omitted if. Logic C - Normally closed 6G /" SPP -686-698 T SAE -66-67 T SAE -666-6986 5 Flow rating A - 5 USgpm @ 8 PSID - USgpm @ 8 PSID Note: oth the manifold and port plug are required. See section J for housing details. See specifications Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -6

EFV--C - Proportional Valve Proportional flow, normally closed spool Up to L/min ( USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S - 6-9 Nm (-9 ft lbs) A - 8- Nm (8-9 ft lbs) Note: EFV- with DIN-65 connector shown. Cartridge only, (.7),8 (.9) 9, (.75).6 86, (.) 6, (.5) 68,6 (.7) Installation drawing (Aluminum) 5. (.) 86... (.6).7 (.5) 5. (.) 8.7 (.) 8 (.5) 8.55 (.5) 5.6 (.).5 (.75) 76. (.) 88.9 (.5) -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min ( USgpm) bar ( psi) Operation Current supplied to the coil controls the valve. At zero current, the valve is fully open from port to port. At 6 ma (V coil) the valve is fully closed. The valve will regulate flow out of port regardless of downstream system pressure. As current is increased to the solenoid the flow out of port will decrease. Features Hardened and ground working parts to give long life with good control; Compact design with low pressure drop.ip69k Tough coil compatibility, continuously rated. Performance data Profile view Description This is a three port pressure compensated normally open proportional flow control screw in cartridge valve. The valve can be used as a priority or a restrictive style valve allowing the valve to control the outlet flow with the option of the excess flow being used for another system. Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure (infinite life) bar ( psi) NFPA rated A Spool-max regulated flow (by-pass mode): 5 L/min ( USgpm) max regulated flow ( port mode): L/min ( USgpm) max input flow (input flow): L/min ( USgpm) Spool-max regulated flow (by-pass mode): 8 L/min ( USgpm) max regulated flow ( port mode): L/min (8 USgpm) max input flow (input flow): L/min ( USgpm) Rated flow Note: Max regulated flow may decrease slightly during compensation. Internal leakage (fully closed) 77-8 cm /min (5- in /min) @ PSID Nominal supply voltage / V Current to fully open valve 5 6 ma (V coil), 8 6 ma (V coil) Current to fully close valve 6 6 ma (V coil), 8 6 ma (V coil) Recommended PWM frequency - Hz Coil resistance.7v V/V, 9. V/V Cartridge only,7 kg (.8 lb), cartridge with coil and end nut,7 kg Mass (.6 lb) Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal coil temperature C (9 F) Cavity C-- All general purpose hydraulics fluids such as: MIL-H-566, SAE, SAE Fluids, DTE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum or steel Hysterisis.5 USgpm with Hz PWM driver Seal kit 997- (una-n), 997- (Viton ) Viton is a registered trademark of E.I. DuPont. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -6

EFV--O - Proportional valve Up to L/min ( USgpm) bar ( psi) Performance Curves Pressure drop port to port Pressure drop port to port Pressure Drop (PSI) 5 5 5 5 5 5 GPM 5 Pressure Drop (PSI) 8 5 5..5 5. GPM 7.5 A..5 Flow vs Current - A Spool Flow (GPM) 6 8 6 y-pass Mode Port Mode Flow vs Current - Spool 6 Flow (GPM) 8 6 y-pass Mode Port Mode Current (Milli-amps) Current (Milli-amps) Parameters: Hz PWM Regulated flow vs Pressure Port Pressure > Port Pressure Regulated flow vs Pressure Port Pressure > Port Pressure GPM 5..5 A. 7.5 C 5. D.5. E F 5 5 5 A amps. amps C.6 amps D.9 amps E. amps F.5 amps 5 PSI GPM 5..5 A. 7.5 C 5. D.5 E. F 5 5 5 A amps. amps C.6 amps D.9 amps E. amps F.5 amps 5 PSI Note: Pressure Compensation curves are shown for spool valves. -6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min ( USgpm) bar ( psi) Model code EFV * * * * *** *****E** 5 6 7 8 9 Function EFV - Electro proportional flow control valve Size - size 6 Manual override option - No core tube special features S - Screw-in 7 Valve housing material - Cartridge only A - Aluminum S - Steel 9 Coil series E - E series coils * These model digits will not be stamped on the valve. For coil part numbers and dimensions see section C. Seal material N - una-n V - Viton 8 Port size Code Port size Housing number Aluminium single Cartridge only Steel single Special features - None Only required when valve has special features, omitted if. Logic - Normally open G /" SPP -687-6985 6G /" SPP -686-698 T SAE -66-67 T SAE -666-6986 5 Flow rating A - USgpm @ 8 PSID - USgpm @ 8 PSID Note: oth the manifold and port plug are required. See section J for housing details. See specifications Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -65

EFV--O - Proportional valve Proportional flow, normally open spool Up to L/min ( USgpm) bar ( psi) Dimensions mm (inch) Torque cartridge in housing S - 6-9 Nm (-9 ft lbs) A - 8- Nm (8-9 ft lbs) Note: EFV- with DIN-65 connector shown. Cartridge only, (.7),8 (.9) 9, (.75).6 86, (.) 6, (.5) 68,6 (.7) Installation drawing (Aluminum) 5. (.) 86... (.6).7 (.5) 5. (.) 8.7 (.) 8 (.5) 8.55 (.5) 5.6 (.).5 (.75) 76. (.) 88.9 (.5) -66 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Sectional view Description This is a proportional poppet style pilot relief cartridge. The pressure setting is directly proportional to changes in DC current input. The valve is ideal for the control of larger valves for the control of a pressure within a system. Operation The poppet is held on the seat by a light spring. The force is increased by the application of magnetic force due to the increase in current. This increases the pressure required to lift the poppet of the seat thus controlling the pressure. Performance data Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. PDRA - Proportional valve Proportional relief.5 L/min (. USgpm) 5 bar (5 psi) Oil immersed armature solenoid. Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Max inlet pressure 5 bar (5 psi) = 5-7 bar (7-55 psi), = - bar (- psi), Pressure range 5 = -5 bar (-5 psi) Max press port bar (5 psi) Max flow.5 L/min (. US GPM) Hystersis <.5% without PWM Dead band % approx Response time = -9 ms, = -95 ms, 5 = -58 ms Internal leakage <5 ml/min Temperature range - to C (- to 8 F) Cavity A879 (see Section M) Electrical data See coil data sheet Torque cartridge into cavity Nm (9.5 lbs ft) For best results mount below reservoir oil level. Mounting position If this is not feasible mount horizontally All general purpose hydraulics fluids such as: MIL-H-566, SAE, Fluids SAE, etc Seal material Standard nitrile with PTFE back up rings Filtration S55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials Aluminium Coil Model Code C6-*-*/9 Coil Weight. kg (.6 lbs) Weight.5 kg (.55 lbs) Voltage available / VDC Seal kit SK9 (Nitrile) SK9V (Viton ) Performance curves Flow - L/min..75..5 Pressure - psi 5 5-5 bar - bar... Flow - US gpm 5-7 bar Viton is a registered trademark of E.I. DuPont. Pressure - bar 7.5 Pressure - psi 5-5 bar 5-7 bar - bar 5 8 7 6 8 % of rated current Pressure - bar Pressure - psi Flow - L/min..75..5 5 5 5-7 bar - bar -5 bar 75% 5% 5% 75% 5% 5%... Flow - US gpm 5% 5%. 8 7 Pressure - bar Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -67

PDRA - Proportional valve Proportional relief.5 L/min (. USgpm) 5 bar (5 psi) Model code PDRA N 6 H W 5 6 7 Function PDRA - Normally open Seal material N - Nitrile V - Viton Pressure range - 5 to bar - to bar 5 Coil termination H - DIN65 F - Flying Lead DM - Deutsch moulded Other terminations available on request. 6 Voltage - VDC - VDC 7 Port size Code Port size Housing number Aluminum Steel Cartridge only W /" SP A85 A8 W /8" SP A A75 T /" SAE A8-6T /8" SAE A5676 A8 Manual override 6 - Screw Dimensions mm (inch) Cartridge only Installation drawing. (.8) 9. (.9) 5. A/F Man override. A/F Man override locknut 5.5 (.).7 (.5) 8.8 (.). (.98). A/F 5. (.97) 6. (.6). (.). (.7) 5. (.97).8 5.8 (.76) (.) holes Ø6.8 (.7) through 5.9 (.6).8 (.5) 9. (.) / -6 UNF 9. (.76) T() Ø.6 (.5) P() -68 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

IRV- - Proportional valve Proportional inverse relief, poppet L/min (.5 USgpm) bar ( psi) Operation The IRV- proportional relief is spring biased closed to the highest setting. Increasing current to the coil will proportionally decrease the pressure setting. When the pressure at port (inlet) is enough to overcome the spring force, the poppet lifts and allows flow from port to port (outlet). Features Hardened and ground components for accurate consistent control and a long life. IP69K Tough coil compatibility continuously rated. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure bar ( psi) Cartridge endurance rating million cycles Cartridge fatigue pressure rating (NFPA/T.6. R-) bar ( psi) Maximum pressure setting range 5- bar ( psi) Rated flow L/min, (.5 USgpm) Nominal supply voltage / V Temperature range - to 9 C (- to 9 F) Maximum oil temperature C (8 F) Maximum internal oil temperature C (9 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE, etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Hysterisis psi with dither Weight cartridge only, kg (. lbs) Seal kit 5658 (una-n), 56686 (Viton ) Viton is a registered trademark of E.I. DuPont Endurance tested to million cycles at full rated flow and pressure. Description This is a proportionally controlled inverse pilot poppet relief valve. Ideal for use with logic elements to control fan or brush pressure where full speed or force is required under electrical failure. Pressure drop Pressure (psi) Metering Performance 6 A 8 6 8 C 6 D 6 E...6.8...6 8..6 9. 65.5 7.. 8.8..8 Pressure (bar) Amps Pressure Differential A - 5 psi - psi C - psi D - psi E - 5 psi Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -69

IRV- - Proportional valve Proportional inverse relief, poppet L/min (.5 USgpm) bar ( psi) Model code IRV * ** * ** *** * * * * ** Function IRV - Inverse proportional relief Size - size Seal material lank - una-n V - Viton Factory set pressure User requested in psi increments. Max pressure setting range 5 - psi Example 5-5 psi - psi 5 Housing material lank - Cartridge only A - Aluminum 5 6 7 8 9 6 Port size 9 Connector type Code Port size Housing number lank - No coil G - ISO DIN 65 Aluminum single Aluminum single Q - Spade Terminals Light duty Fatigue rated W - Flying Lead 6T 8T Cartridge only SAE 6 SAE 8 5665 5665 N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and dimensions G G /" SPP /8" SPP 5986-8767 see section C. 6H 8H SAE 6 SAE 8 8767 8767 Coil series lank - No coil J - J Series, W See section J for housing details. For coil part numbers and dimensions see section C. 7 Coil voltage - No coil - VDC - VDC - VDC 8 Type of power lank - No coil D - DC w/o diode - DC with diode Coil special features lank - No coil - No special feature Valve special features lank - No coil Dimensions mm (inch) Cartridge only Installation drawing 9, HEX (.75) 7. (.85) 5. (.) 7, (.85) X 7. (.8) 6.5 (.5).8 (.8), (.) 5, HEX (.),875 - THD.,6 (.6) 9.5 (.7) 6.5 (.5) 9. (.75) Ø 5,8 (.6) Ø 8,9 (.5) -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

IRV- - Proportional valve Proportional inverse relief, Spool 57 L/min (5 USgpm) bar (5 psi) Operation The IRV- proportional relief is spring biased closed to highest setting. Increasing current to the coil will proportionally decrease the pressure setting. This valve remains closed between port and until the predetermined pressure setting has been reached at port, overcoming the spring force and opening the spool to allow flow from port to. Features Hardened and ground components for accurate consistent control and a long life. Pilot style to give accurate pressure control over varying flows. IP9K Tough coil compatibility continuously rated. Profile view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) bar (5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Maximum pressure setting range 5 bar to bar (5 to 5 psi) Rated Flow 57 lpm ( 5 US gpm) Nominal supply voltage / V Cavity C-- Internal leakage, port to port cm /min. (7 in /min) @ bar Standard housing material Aluminum or steel Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc Filtration Cleanliness code 8/6/ Temperature range -º to º C (-º to 8º F) Hysterisis psi with dither Weight cartridge only. kg (. ibs) Seal Kit 5658 (una-n), 5686 (Viton ) Viton is a registered trademark of E.I. DuPont. Endurance tested to million cycles at full rated flow and pressure. Description This is a inverse proportionally controlled spool type two stage relief valve. Ideal for use to control the fan drive or brush pressure where full speed or force is required under electrical failure. Pressure drop Pressure (psi) Metering Performance 6 A 8 6 8 C 6 D 6 E...6.8...6 8..6 9. 65.5 7.. 8.8..8 Pressure (bar) Amps Pressure Differential A - 5 psi - psi C - psi D - psi E - 5 psi Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -7

IRV- - Proportional valve Proportional inverse relief, Spool 57 L/min (5 USgpm) bar (5 psi) Model code IRV * ** * ** *** * * * * ** Function IRV - Inverse proportional relief Size - size Seal material lank - una-n V - Viton Factory set pressure User requested in psi increments. Max pressure setting range 5 - psi Example 5-5 psi - psi 5 Housing material lank - Cartridge only A - Aluminum 5 6 7 8 9 6 Port size 9 Connector type Code Port size Housing number lank - No coil G - ISO DIN 65 Aluminum Single Aluminum Single Q - Spade Terminals Light duty Fatigue rated W - Flying Lead 6T 8T Cartridge only SAE 6 SAE 8 5665 5665 N - Deutsch (DC only) Y - Amp JR (DC only) P - Conduit For coil part numbers and G G /" SPP /8" SPP 5986-8767 dimensions see section C. 6H 8H SAE 6 SAE 8 8767 8767 Coil series lank - No coil J - J Series, W See section J for housing details. For coil part numbers and dimensions see section C. 7 Coil voltage - No coil - VDC - VDC - VDC 8 Type of power lank - No coil D - DC w/o diode - DC with diode Coil special features lank - No coil - No special feature Valve special features lank - No coil Dimensions mm (inch) Cartridge only Cartridge Only 9, HEX (.75) Installation drawing 7. (.85) 5. (.) 7, (.85) X 7. (.8) 6.5 (.5).8 (.8), (.) 5, HEX (.),875 - THD.,6 (.6) 9.5 (.7) 6.5 (.5) 9. (.75) Ø 5,8 (.6) Ø 8,9 (.5) -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Sectional view Operation This valve remains closed between port and until the predetermined pressure setting has been reached Performance data Ratings and specifications ERV- - Proportional valve Proportional relief, spool.8-6. L/min ( - 5 USgpm) bar (5 psi) at port, overcoming the electrical force and opening the spool to allow flow from port to port. Features Hardened and ground components for accurate consistent control and a long life. Pilot style to give accurate pressure control over varying flows. IP69K Tough coil compatibility continuously rated. Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports) - bar (-5 psi) Cartridge fatigue pressure (infinite life) bar (5 psi) Rated flow.8-6, L/min (-5 USgpm) Temperature range - to C (- to 8 F) Cavity C-- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Weight including coil, kg (.98 lbs) Seal kit 5658 (una-n), 88967 (Viton ) Viton is a registered trademark of E.I. DuPont Description This is a proportional internally pilot operated screw in cartridge relief valve. Good control over large flows for the physical size of the cartridge. Ideal for the control of pressure under varying flow conditions. Pressure Drop - psi Pressure Pressure drop curves Pressure override, energized Performance curves Cartridges only bar 7 Flow - L/min (,8 cst oil @ 9 C) psi 5 Step response Zero outlet pressure Volts 9 6 5 5 5 Flow - USgpm (5 SUS oil @ F) 5 Inputvoltage Pressure Drop - bar Pressure override, de-energized Pressure Drop - psi Pressure - psi 5 Flow - L/min (,8 cst oil @ 9 C) 5 5 5 Flow - USgpm (5 SUS oil @ F) Pressure gain 8 7 6 Pressure Drop - bar Pressure - bar.... seconds Response tim e 6 9volts Input voltage @ 5 C (77 F) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -7

ERV- - Proportional valve Proportional relief, spool.8 L/min (6 USgpm) bar (5 psi) Model code ERV (V) ** ** *** * Function ERV - Proportional relief valve Size - size Seal material lank - una-n V - Viton Maximum pressure Customer to specify settings in increments of 7 bar ( psi) and coded in hundreds of psi within the 5- bar range (5- psi) range. Example: 5-5, (5 psi) 5 6 7 8 5 Port size Code 6T G G 6H Port size Cartridge only SAE 6 /" SPP /8" SPP SAE 6 Housing number Aluminum single 5665* 8767* 8767 8767 7 Connector types lank - No coil G - DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch Y - Amp JR For coil part numbers and dimensions see section C. 8H *Light duty housing. SAE 8 8767 8 Special features - None See section J for housing details. 6 Voltage rating - No coil D - VDC D - VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Note: This valve uses the standard J series coils, see section C for coil part numbers and specifications. Only required if valve has special features, omitted if. Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft lbs). Cartridge only Valve is shown with W coil. Installation drawing 9,6 (.6) 7. (.87) 5. (.) Ø 8,9 (.5) 9, (.75) Hex X 7. (.8) 6.5 (.5).8 (.8) 7, (.87) 5, (.) Hex 9.5 (.7) 6.5 (.5) 9. (.75), (.).875"- Thd. Ø 5,8 (.6) Warning Maintain 5-8 Nm(-6 ft lbs) maximum torque on valve tube nut.over tightening may cause valve failure. -7 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

ERV-6 - Proportional valve Proportional relief, spool Up to L/min (5 USgpm) bar ( psi) Sectional view Operation This valve remains closed between port and until the predetermined pressure setting has been reached Performance data Ratings and specifications at port, overcoming the electrical force and opening the spool to allow flow from port to port. Features Hardened and ground components for accurate consistent control and a long life. Pilot style to give accurate pressure control over varying flows. IP69K Tough coil compatibility continuously rated. Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports),5- bar (5- psi) Cartridge fatigue pressure (infinite life) bar ( psi) Rated flow 7,6-, L/min (-5 USgpm) Temperature range - to C (- to 8 F) Cavity C-6- All general purpose hydraulic fluids such as: MIL-H-566, SAE, Fluids SAE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Weight including coil, kg (.98 lbs) Seal kit 5658 (una-n), 88969 (Viton ) Viton is a registered trademark of E.I. DuPont Pressure drop curves Pressure override, energized Flow - L/min (,8 cst oil @ 9 C) Pressure override, de-energized Flow - L/min (,8 cst oil @ 9 C) 8 6 8 6 7 Description This is a proportional internally pilot operated screw in cartridge relief valve. Good control over large flows for the physical size of the cartridge. Ideal for the control of pressure under varying flow conditions. Pressure - psi 7 5 Flow - USgpm (5 SUS oil @ F) Pressure - bar Pressure - psi 6 5 Flow - USgpm (5 SUS oil @ F) Pressure - bar Performance curves Cartridges only Zero outlet pressure bar psi Step response Volts 6 Pressure gain 8 Pressure 7 9 6 Inputvoltage Pressure -psi 7 Pressure -bar.... seconds 6 9 volts Response tim e Inputvoltage @ 5 C (77 F) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -75

ERV-6 - Proportional valve Proportional relief, spool Up to L/min (5 USgpm) bar ( psi) Model code ERV 6 (V) ** *** *** * Function ERV - Proportional relief valve Size 6-6 size Seal material lank - una-n V - Viton Maximum pressure Customer to specify settings in increments of 7 bar ( psi) and coded in hundreds of psi within the 5- bar range (5- psi) range. Example: 5-5, (5 psi) 5 6 7 8 5 Port size Code T G 6G H Port size Cartridge only SAE /" SPP /" SPP SAE Housing number Aluminum single 5669* 87676* 87678 87677 7 Connector types lank - No coil G - DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch Y - Amp JR For coil part numbers and dimensions see section C. H *Light duty housing. SAE 566 8 Special features - None See section J for housing details. Only required if valve has special features, omitted if. 6 Voltage rating - No coil D - VDC D - VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Note: This valve uses the standard J series coils, see section C for coil part numbers and specifications. Dimensions mm (inch) Cartridge only Torque cartridge in aluminum housing 8- Nm (8-9 ft lbs). Installation drawing 9,6 (.6) 77.9 (.7).8 (.5) Ø 8,9 (.5) 9, (.75) Hex Torque to 5-8 Nm 88.9 (.5) 6.5.5 X 8.7 (.) 8. (.) 79, (.). (.) 68.8 (.688) 88.9 (.5) 8, (.5) Hex, (.75)."- Thd. Ø 8,55 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. -76 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Sectional view (Tank) (Pres) (Reg) Description This is a low pressure proportional direct acting pressure reducing valve with a reverse relief screw in cartridge valve. It is ideal for the control of compensators on a pump or brake and clutch systems on a transmission circuit. Operation In the de-energized position, pressure inlet port is open to reduced pressure port, return port is closed. As electrical current is increased, the setting of the valve increases allowing pressure at port to increase. If the pressure at port exceeds the setting of the valve, the spool will shift further and relieve to port. Performance data Ratings and specifications Features High flow capacity with reduced space requirements. No dynamic seals. Standard valve bodies and common cavities. One-piece encapsulated coil with minimal amperage draw. Oil immersed armature solenoid. PPDA - Proportional valve Proportional reducing/relief, spool L/min (5. USgpm) bar ( psi) Various coil terminals and voltages. Coil interchangeability with valves of same series. Manual override, seal variations and other options available. Sealed coil arrangement to protect stem from corrosion. Performance data is typical with fluid at cst (5 SUS) Max inlet pressure bar ( psi) Max regulated pressure 9 watt coil bar, 9 watt coil 8 bar 8.6 L/min (5 USgpm) 9 watt coil Max flow L/min (5. USgpm) 9 watt coil Hystersis 6% max without PWM Frequency Hz Dead band 9% approx Response time = -9 ms, = -95 ms, 5 = -58 ms Internal leakage Up to 5 ml/min at bar differential Temperature range - to C (- to 8 F) Cavity A5 (see Section M) Torque cartridge into cavity Nm ( lbs ft) Mounting position Unrestricted All general purpose hydraulics fluids such as: MIL-H-566, SAE Fluids, SAE, etc Seal material Standard nitrile with PTFE back up rings Filtration S55/ Class 8/ (5 micron or better) Nominal viscosity range 5 to 5 cst Standard housing materials Aluminium Coil weight. kg (.6 lbs) Weight cartridge only.5 kg (.55 lbs) Seal kit SK9 (Nitrile) SK9V (Viton ) Coil part number C6*-*/9 (PPDA) C6-*-*/9 (PPDH) Voltage available, VDC Viton is a registered trademark of E.I. DuPont Pressure Drop Flow - L/min 8 6 75 5 Pressure - psi 58 5-9 5 -.6..8. 5. Flow - US gpm Pressure - bar Performance curve 6 5 Pressure - psi 88 PPD AH 6 PPD A 7 5 5 6 8 % of rated current Pressure - bar Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -77

PPDA - Proportional valve Proportional Reducing/Relief, Spool L/min (5. USgpm) bar ( psi) Model code PPDA N H 6 W Function PPDA - Standard PPDH - Heavy duty Seal material N - Nitrile V - Viton Coil termination H - DIN65 F - Flying Lead DM - Deutsch moulded Other terminations available on request. Manual override 6 - Screw Type Manual Override 5 6 6 Port size Code Port size Housing number Aluminum single Cartridge only W /" SP A77 W /8" SP A668 6T /8" SAE 656 See section J for housing details. 5 Voltage - VDC - VDC Dimensions mm (inch) Cartridge only 9. (.9) Installation drawing 57. (.5). (.8) 7. (.8) 5.5 (.) holes Ø7. (.8) thro 8. (.). (.).7 (.58) 9. (.6) 5. (.97) 8.6 (.) 8. (.5).7 (.5).8 (.9) 7.6 (.87) 5. (.). A/F 9.8 (.57) / -6-UNF-A (Tank) (Pressure) 6.9 (.67) Ø. (.56) Ø5.8 (.6) (Regulated) -78 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Sectional view (RP) (T) (P) Description This is a low pressure proportional direct acting pressure reducing valve with a reverse relief screw in cartridge valve. It is ideal for the control of compensators on a pump or brake and clutch systems on a transmission circuit. Operation In the de-energized position, pressure inlet port is closed and reduced pressure port is open to return port. As electrical current is increased, port opens to port and port closes, proportionally increasing pressure at port. If the pressure at port exceeds the setting of the valve, the spool will shift further and relieve to port. EPRV-8 - Proportional valve Proportional reducing/relief, spool 7.6 L/min ( USgpm) 5 bar (5 psi) Features Hardened and ground components for accurate consistent control and a long life. IP69K Tough coil compatibility continuously rated. Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Maximum inlet pressure 5 bar (5 psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Reduced pressure range - bar (- psi) Maximum operating flow 7,6 L/min ( USgpm) Temperature range - to C (- to 8 F) Cavity C-8- Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Recommended PWM frequency 5 Hz Hysterisis @ 5 Hz PWM 5% Housing material (standard) Aluminum Weight including coil,9 kg (.6 lbs) Seal kit -795 (una-n), -795 (Viton ) Viton is a registered trademark of E.I. DuPont Pressure drop curves Flow - L/min (,8 cst oil @ 9 C) Flow - L/min (,8 cst oil @ 9 C) Relieving mode Reducing mode 6 8 8 8 7 5 5 Pressure drop - psi 75 5 5 A.5..5. Flow - USgpm (5 SUS oil @ F) A - Port to port - Port to port 6 Pressure drop - bar Pressure - psi Flow - USgpm (5 SUS oil @ F) 8 7 Pressure - bar Performance curves Reduced pressure bar 8 psi 6 Step response.... Time - sec ( VDC)..8. Amperage Amperage decreasing Amperage increasing Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -79 Reduced pressure - psi Regulated pressure vs amperage...5.7.9 ( VDC) 8.... 7 Reduced pressure - bar ( VDC)

EPRV-8 - Proportional valve Proportional reducing/relief, spool 7.6 L/min ( USgpm) 5 bar (5 psi) Model code EPRV 8 (V) (A) ** *** * * Function EPRV - Proportional reducing/relieving valve Size 8-8 size Seal material lank - una-n V - Viton 5 6 5 Port size 7 Connector types Code Port size Housing number Aluminum single lank - No coil G - DIN 65 Q - Spade Terminals Cartridge only W - Flying Lead N - Deutsch T SAE -67 Y - Amp JR 6T G SAE 6 /" SPP -67-679 For coil part numbers and dimensions see section C. G /8" SPP -67 See section J for housing details. 7 8 9 8 Coil S - S series coils Valve housing material Omit for cartridge only A - Aluminum 6 Voltage rating - No coil D - VDC D - VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Note: This valve uses the standard S series coils, see section C for coil part numbers and specifications. 9 Special features - None Only required if valve has special features, omitted if. Dimensions mm (inch) Torque cartridge in aluminum or steel housing - Nm (5- ft lbs) Cartridge only Valve is shown with N coil. 6, (. ) Installation drawing 9. (.75) 5. (.) 9. (.75),8 (.5 ) 5.5 (.6) 67. (.65). (.) 56.7 (.) 6.5 (.5) X7. (.8) 9.8 (.7) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut.over tightening may cause valve failure. -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Profile view Operation In the de-energized position, pressure inlet port is closed and reduced pressure port is open to return port. As electrical current is increased, port opens to port and port closes, proportionally increasing pressure at port. Performance data Pressure Drop drop Curves curves If the pressure at port exceeds the setting of the valve, the spool will shift further and relieve to port. Features Compact design allows for more flexible machine design Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Maximum inlet pressure, A() and P() Maximum inlet pressure, Tank () EPPV5 - Proportional Valve Proportional pressure reducing valve 8. L/min (. USgpm) 5 bar (75 psi) Excellent repeatability, hysteresis and resolution due to bearing design Quality standard reduces maintenance and downtime costs 5 bar (75 psi) bar (5 psi) In accordance with control pressure range in model code 8. L/min ( USgpm) - to 5 C (- to F) TC65 Reduced pressure range Maximum operating flow Temperature range Cavity Fluids Mineral oil according to DIN 55 Filtration Cleanliness code /8/5 Recommended PWM frequency Hz Hysterisis @ Hz PWM Resistance Current Protection class <.7 bar (pa = ) <. bar (pa = 5) <.5 bar (pa = 5).7 ohms +/-5% for V.8 ohms +/-5% for V 5 ma for V 75 ma for V Up to IP6K6 / IPX9K Description This is a low pressure proportional direct acting pressure reducing cartridge valve. It is ideal for the control of compensators on a pump or brake, proportional valve spool and clutch systems on a transmission circuit. Port A to T Pressure drop bar 5 bar 5 bar 5 bar 5 5 6 7 8 flow (l/min) bar Port P to A 5 bar 5 bar 5 bar 5 5 6 7 8 flow (l/min) Performance curves Regulated pressure vs. amperage p A -p t [bar] P A (I ) p A (I ) *9% P A (I ) *% P A (I=) 5ms electrical signal 5ms time Reduced pressure bar 5 5 5 bar 5 bar bar 5 5 6 7 8 drawings. We reserve the right to change specifications without notice. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -8

EPPV5 - Proportional Valve Proportional pressure reducing valve/relief, spool 8. L/min (. USgpm) 5 bar (75 psi) Model code EPPV5 H ** ** D D 5 6 7 8 9 Function EPPV5 - Proportional pressure reducing valve Control pressure - bar (9 psi) 5-5 bar (6 psi) - bar (6 psi) 6 Voltage Rating - V - V Seal material H - una-hnr 5 Port size 7 Voltage type D - DC Manual override ption - Manual override not available Code Port size Cartridge only 8 Connector type N - Deutsch DT-P 9 Special features - None Cartridge only Dimensions (mm) (ø9.6) (8.5) (.5) (.5) (9) (.) A P T (ø9.) (ø.5 (x)) (95) -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

Profile view Description This is a low pressure proportional direct acting pressure reducing cartridge valve with manual override available. It is ideal for the control of compensators on a pump or brake and clutch systems on a transmission circuit. Operation In the de-energized position, pressure inlet port is closed and reduced pressure port is open to return port. As electrical current is increased, port opens to port and port closes, proportionally increasing pressure at port. Performance data Pressure Drop drop Curves curves If the pressure at port exceeds the setting of the valve, the spool will shift further and relieve to port. Features Compact design allows for more flexible machine design Ratings and Specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Maximum inlet pressure, A() and P() Maximum inlet pressure, Tank () EPPV6 - Proportional Valve Proportional pressure reducing valve 8. L/min (. USgpm) 5 bar (75 psi) Excellent repeatability, hysteresis and resolution due to bearing design Quality standard reduces maintenance and downtime costs Available with manual override option 5 bar (75 psi) bar (5 psi) In accordance with control pressure range in model code 8. L/min (. USgpm) - to 5 C (- to F) TC6 Reduced pressure range Maximum operating flow Temperature range Cavity Fluids Mineral oil according to DIN 55 Filtration Cleanliness code /8/5 Recommended PWM frequency Hz Hysterisis @ Hz PWM Resistance Current Protection class Port A to T Pressure drop bar 5 5 5 flow (l/min) bar 5 bar bar 5 6 7 8 bar Port P to A 5 5 5 <.7 bar (pa = ) <. bar (pa = 5) <.5 bar (pa = 5) 5. ohms +/-5% for V. ohms +/-5% for V 5 ma for V 75 ma for V Up to IP6K6 / IPX9K 5 6 7 8 flow (l/min) bar 5 bar bar Performance curves Regulated pressure vs. amperage p A -p t [bar] P A (I ) p A (I ) *9% P A (I ) *% P A (I=) 5ms 5ms time Reduced Reduced pressure pressure bar bar 5 5 5 bar 5 bar bar 5 5 6 7 8 electrical signal Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -8

EPPV6 - Proportional Valve Proportional pressure reducing valve/relief, spool 8. L/min (. USgpm) 5 bar (75 psi) Model code EPPV6 H M ** ** D Y 5 6 7 8 9 Function EPPV6 - Proportional pressure reducing valve Control pressure - bar (9 psi) - bar (6 psi) 6 Voltage rating - V - V Seal material lank - NR una 5 Port size 7 Voltage type D - DC Manual override option Code Port size Cartridge only 8 Connector type Y - AMP Jr Power Timer M- with manual override 9 Special features - None Cartridge only Dimensions (mm) (5.9) (7.) (8.9) (.9) () P T (ø.5) A (ø.5+. (x)) (89) -8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EPRV- - Proportional valve Proportional reducing/relief, spool 7.6 L/min ( USgpm) 5 bar (5 psi) Description The EPRV- is an electric, proportionally controlled, internally pilot operated, spool type, screw-in relief valve. Operation This valve remains open from port to port (port must be vented). Once the predete mined pressure\is reached at port, the spool shifts to restrict the inlet flow at port, which regulates the pressure at port. If the pressure at port exceeds the setting of the valve, the spool will shift farther and relieve to port. Functional symbol Functional Symbol (P) (RP) Sectional view View (T) Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports),5-5 bar (5-5 psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow - 7,6 L/min ( -. USgpm) Cavity C-- Standard housing materials Aluminum Temperature range - to C (- to 8 F) Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE, etc. Filtration Cleanliness code 8/6/ Weight cartridge and coil, kg (.98 lbs) Seal kits 5658 (una-n) 889599 (Viton ) Viton is a registered trademark of E.I. DuPont Pressure override characteristics Pressure override, energized Pressure override, energized Pressure override, de-energized Flow - L/min (8, cst oil @ 9 C) Flow - L/min (8, cst oil @ 9 C) 6 7 7 5 7 7 Pressure - psi 8 Pressure - bar Pressure - psi 5 Pressure - bar Flow - USgpm (5 SUS oil @ F) Flow - USgpm (5 SUS oil @ F) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -85

EPRV- - Proportional valve Proportional reducing/relief, spool 7.6 L/min ( USgpm) 5 bar (5 psi) Model code EPRV (V) (A) ** *** * Function EPRV - Proportional reducing/relieving valve Size - size Seal material lank - una-n V - Viton Maximum pressure (factory set) Customer to specify settings in increments of 7 bar ( psi) and coded in hundreds of psi within the -5 bar range (-5 psi) range. Example: 5-5, (5 psi) Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft. lbs) 5 Port size - Cartridge only Performance Characteristics Cartridges only Zero outlet pressure Code Port size Housing number /8 SPP -758* 6T SAE 6 5666* G / SPP 8767 G /8 SPP 8767 6H SAE 6 8767 8H SAE 8 8767 *Light duty housing. See section J for housings. 6 Voltage rating - No coil D - VDC D - VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Note: This valve uses the standard J series coils, see section C for coil part numbers and specifications. Reduced pressure bar 8 5 psi 6 6 7 8 Step response 7 Connector types lank - No coil G - DIN 65 Q - Spade Terminals W - Leadwire N - Deutch Y - Amp JR volts.... seconds Response time 8 Special features - None (Only required if valve has special features, omitted if. ) Warning Maintain 5-8 Nm(-6 ft lbs) maximum torque on valve tube nut.over tightening may cause valve failure. 9 6 Input voltage Pressure - psi 5 5 Pressure gain 7 Pressure - bar Valve is shown with W coil. 6 9 volts Input voltage @ 5 C (77 F) -86 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

EPRV- EPRV- Proportional pressure reducing-relieving Proportional pressure valve reducing-relieving valve Description Operation Description The EPRV- is an electric, This Operation valve remains open the predetermined spool shifts to pressure If exceeds the pressure the at setting port of Description proportionally controlled, Operation from port to port (port is restrict reached the at port inlet, flow the spool at exceeds the valve, the the setting spool the valve, The EPRV- is an is an electric, electric, This valve remains open open will The internally EPRV- pilot operated, is an electric, spool This must valve be remains vented). open Once shifts the spool the port spool, to which restrict shifts shifts regulates the to inlet flow the exceeds to exceeds shift spool farther will the shift setting and farther of setting relieveand proportionally controlled, from port to to port port (port of at restrict port, the which inlet regulates flow at the relieve the valve, to port the. spool will internally proportionally type, screw-in pilot pilot operated, controlled, relief valve. spool spool from the (port must predetermined port must be be to vented). port pres- (port Once restrict the pressure the inlet at port flow. the to port valve,. pressure port, which at port regulates. shift farther the and spool relieve will type, internally screw-in pilot relief operated, relief valve. valve. spool sure the must predetermined is reached be vented). at port Once pressure predetermined is reached at port pres-, the If the pressure at at port port. to port., port If the the pressure, pressure which regulates port port. shift to port farther. and relieve type, screw-in relief valve. the Functional Symbol Ratings sure RATINGS is and reached AND specifications SPECIFICATIONS port, If the pressure at port Functional Symbol Performance RATINGS data AND is data typical SPECIFICATIONS is typical with fluid with at,8 fluid cst at (5,8 SUS) cst and (5 9 C SUS) ( F) and 9 C ( F) Functional symbol Symbol ( P) Typical Performance application data pressure pressure is typical (all ports) (all with ports) fluid at,8 cst (5 SUS) and 9 C ( F),5,5-7 - 7 bar bar (5 - psi) ( P) Maximum Typical application Inlet Inlet Pressure Pressure pressure (all ports),5-7 bar (5 bar bar - (5 psi) ( P) Cartridge Maximum fatigue fatigue Inlet pressure Pressure pressure (infinite (infinite life) life) 7 7 bar bar (5 ( psi) Rated flow L/min (8 USgpm) Rated Cartridge flow fatigue pressure (infinite life) 7 L/min bar (8( psi) (P) Cavity C-- Cavity Rated flow L/min (8 USgpm) C-- (T) Standard housing materials Aluminum (P) Standard Cavity housing materials Aluminum C-- (P) (T) Temperature range - to C (- to 8 F) (T) Temperature Standard housing range materials - to C (- Aluminum to 8 F) Sectional View Fluids All general purpose hydraulic fluids such as: Fluids Temperature range All general purpose MIL-H-566, - hydraulic to C SAE fluids, (- SAE to such, 8 F) etc. as: Sectional View MIL-H-566, SAE, SAE, etc. Sectional view View Filtration Fluids All general purpose hydraulic Cleanliness fluids code 8/6/ such as: Weight Filtration cartridge and coil MIL-H-566, Cleanliness SAE,, code SAE kg (.98 8/6/, etc. lbs) Seal Weight Filtration kits cartridge and coil Cleanliness, 5658 code kg (.98 (una-n) 8/6/ lbs) Seal Weight kits cartridge and coil 5658, 889599 kg (una-n) (.98 (Viton lbs) ) Viton is a registered trademark Seal kits 5658 889599 of E.I. (una-n) (Viton DuPont ) Viton is a registered trademark of E.I. DuPont 889599 (Viton ) Viton is a registered trademark of E.I. DuPont Pressure Override Characteristics Reducing Mode EPRV-X-XX-- Pressure override, Override characteristics energized Characteristics Reducing Mode Pressure Override Characteristics EPRV-X-XX-- Reducing Mode Pressure override, energized EPRV-X-XX-- Pressure override, energized A EPRV-X--- A EPRV-X--- 5 A EPRV-X--- A A C EPRV-X--- EPRV-X--- EPRV-X--- 5 A C EPRV-X--- EPRV-X--- 5 C EPRV-X--- 5 5 C 5 C C 5 5 5 5 6 7 8 Flow (gpm) 5 6 7 8 Flow (gpm) 5 6 7 8 Pressure override, de-energized Flow (gpm) Pressure override, de-energized Pressure override, de-energized A EPRV-X--- A 8 EPRV-X--- A EPRV-X--- A Flow - L/min (8, cst oil @ 9 C) A EPRV-X--- A Flow - L/min (8, C EPRV-X--- cst oil @ 9 C) 8 EPRV-X--- 8 EPRV-X--- Flow 7 - L/min (8, cst oil 7 @ 9 C) Flow 7 - L/min (8, C EPRV-X--- C EPRV-X--- cst oil 7 @ 9 C) 6 5 7 7 6 6 7 7 C 5 6 6 C 8 8 C 8 8 5 8 5 5 6 7 8 Flow (gpm) 5 6 7 8 Flow (gpm) 5 6 7 8-58 EATON Vickers Screw-In Cartridge Where Valves measurements V-VLOV-MC-E are critical Flow request September, (gpm) certified 7 drawings. We reserve the right to change specifications without notice. -58 Flow - USgpm EATON Vickers (5 Eaton SUS Screw-In Hydraulic oil Cartridge Screw-in @ F) Valves V-VLOV-MC-E September, 7 Cartridge Valves (SiCV) E-VLSC-MC-E6 January Flow - USgpm 8 www.eaton.com (5 SUS oil @ F) -87 Flow - USgpm (5 SUS oil @ F) Flow - USgpm (5 SUS oil @ F) Pre ure - p i - p i P P Pressure Pressure P Pressure Pre ure - ar - ar Pre ure - p i - p i EPRV-- Proportional valve Proportional reducing/relief, spool L/min (8 USgpm) 7 bar ( psi) Pre ure - ar - ar

EPRV-- Proportional valve Proportional reducing/relief, spool L/min (8 USgpm) 7 bar ( psi) Model code EPRV (V) ** ** *** * Pressure - bar nds Dimensions mm (inch) Torque cartridge in aluminum housing 7-5 Nm (5- ft. lbs) Function EPRV - Proportional EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E September, 7-88 Valve is shown with W coil. EPRV (V) ** ** *** * - Cartridge only reducing/relieving Customer to specify settings in 5 6 7 8 valve increments of 7 bar Code Port size Housing number ( psi) and coded in hundreds Function A /8 SPP -758* Maximum pressure of psi within the 5-7 bar EPRV - Proportional Size (factory set) range (5- psi) range. A6T SAE 6 5666* reducing/relieving - valve size Customer to specify Example: settings 5-5, (5 psi) AG / SPP 8767 in increments of 7 bar ( psi) and coded in hundreds AG /8 SPP 8767 Size of psi within the 5-7 bar - Size Seals A6H SAE 6 8767 range (5- psi) 6 Voltage range. rating lank - una-n A8H SAE 8 8767 Example: 5-5, (5 - No psi) coil V - Viton Seals D - VDC *Light duty housing. lank - una-n D - VDC See section J for housings. 6 Voltage rating V - Viton - VDC/w diode* Warning - No coil - VDC/w diode* D - VDC 7 Connector types 8 *Optional arc suppression diode. Coil series Maintain 5-8 Nm (-6 ft. lbs) D - VDC WARNING maximum torque on valve Note: This valve uses 7the Connector standard Types lank - No coil 8 Coil Series lank - No coil - VDC/w diode* tube nut. Over tightening may Maintain 5-8 Nm - VDC/w J diode* series coils, see section lankc - for No coil coil G - DIN 65 lank - No coil J - J series coil cause valve failure. (-6 ft. lbs) maximum torque on valve tube part numbers and specifications. G - DIN 65 Q - Spade Terminals J - J series coil *Optional arc suppressing diode. Q - Spade terminals W - Leadwire Note: This valve uses the standard W - Leadwire N - Deutch 9 9 Coil special features nut. Over tightening may J series coils, see section C for Coil Special Features N - Deutch Y - Amp JR cause valve failure. coil part numbers and specifications. Y - Amp JR - None - None Dimensions (Only required when (Only valve required when valve has mm (inch) has special features, special omitted features, omitted if. ) Torque cartridge in if. ) aluminum housing 7-5 Nm (5- ft. lbs). 8 Performance Characteristics s Cartridges only Zero outlet pressure Maximum pressure (factory set) Reduced Pressure (psi) 6 Reduced Pressure (psi) 8 6 8 6 Reduced Pressure (psi) 8 6 A A 8 6 C C 8 6.....5.6.7.8.9 Current (A) A EPRV-X---.....5.6 EPRV-X---.7.8.9 Step Response Curve 8 6 8 6 8 6 Reduced Pressure (psi) 5 Port size Pressure vs. Current Current C (A) EPRV-X---.8 8 A 6.6. 8 6 C. 8 6 C.... A EPRV-X--- EPRV-X--- C EPRV-X---.... Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com 5 6 A 7 8.8.6.. Input Current (A) Time (seconds) A EPRV-X--- EPRV-X--- Time (seconds) C EPRV-X--- A EPRV-X--- -59 EPRV-X--- C EPRV-X--- Input Current (A)

EPRV-6 - Proportional valve Proportional reducing/relief, spool 8 L/min ( USgpm) 5 bar (5 psi) Operation This valve remains open from port to port (port must be vented). Once the predetermined pressure is reached at port, the spool shifts to restrict the inlet flow at port, which regulates the pressure at port. If the pressure at port exceeds the setting of the valve, the spool will shift farther and relieve to port. Features Hardened and ground components for accurate consistent control and a long life. IP69K Tough coil compatibility continuously rated. Sectional view Performance data Ratings and specifications Performance data is typical with fluid at,8 cst (5 SUS) and 9 C ( F) Typical application pressure (all ports),5-5 bar (-5 psi) Cartridge fatigue pressure (infinite life) 5 bar (5 psi) Rated flow -8, L/min (- USgpm) Temperature range - to C (- to 8 F) Cavity C-6- Fluids All general purpose hydraulic fluids such as: MIL-H-566, SAE, SAE etc. Filtration Cleanliness code 8/6/ Housing material (standard) Aluminum Weight including coil,9 kg (. lbs) Seal kit 5658 (una-n), 889599 (Viton ) Viton is a registered trademark of E.I. DuPont. Pressure drop curves Pressure override, energized Pressure override, de-energized Flow - L/min (8, cst oil @ 9 C) 8 9 6 9 8 5 Flow - L/min (8, cst oil @ 9 C) 8 9 9 8 Pressure - psi 8 Pressure - bar Pressure - psi 5 Pressure - bar Description This is a low pressure proportional pilot operated pressure reducing valve with a reverse relief screw in cartridge valve. It is ideal for the control of compensators on a pump or brake and clutch systems on a transmission circuit. Reduced pressure bar 8 5 5 Flow - USgpm (5 SUS oil @ F) Performance curves Cartridges only psi 6 Step response,,,, Response time volts 9 6 Zero outlet pressure Inputvoltage seconds 5 Pressure gain Inputvoltage @ 5 C (77 F) Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -89 Pressure -psi Flow - USgpm (5 SUS oil @ F) 5 5 7 6 9 volts 5 Pressure -bar

EPRV-6 - Proportional valve Proportional reducing/relief, spool 8 L/min ( USgpm) 5 bar (5 psi) Model code EPRV 6 (V) ** *** *** * Function EPRV - Proportional reducing/relieving valve Size 6-6 size Seal material lank - una-n V - Viton Maximum pressure Customer to specify settings in increments of 7 bar ( psi) and coded in hundreds of psi within the -5 bar range (-5 psi) range. Example: 5-5, (5 psi) 5 6 7 8 5 Port size Code 6 T 6G H Port size Cartridge only /" SPP SAE /" SPP SAE Housing number Aluminum single -7565* 5666* 8767 8767 7 Connector types lank - No coil G - DIN 65 Q - Spade Terminals W - Flying Lead N - Deutsch Y - Amp JR For coil part numbers and dimensions see section C. H *Light duty housing. SAE 8767 8 Special features - None See section J for housing details. 6 Voltage rating - No coil D - VDC D - VDC 6D - 6VDC - VDC/w diode* - VDC/w diode* *Optional arc suppression diode. Only required if valve has special features, omitted if. Dimensions mm (inch) Cartridge only Valve is shown with W coil. Torque cartridge in aluminum housing 8- Nm (8-9 ft lbs). Installation drawing.8 (.5) 77.9 (.7).8 (.5) 57 (.) 88.9 (.5). (.5) 8. (.). (.) 9.68 (.688). (.5) X8.7 (.) Warning Maintain 5-8 Nm (-6 ft lbs) maximum torque on valve tube nut. Over tightening may cause valve failure. -9 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com

- Additional products, product lines, and services offered by Eaton - For hydropower, it s... Durability. Complete plant control systems for gate operation, turbine governors and balance of plant... including total hydraulic control systems, entire power distribution and control systems, coolant, lubrication and filtration systems. All with the most respected brand name products in the industry, manufactured and war- ranted by Eaton under a single purchase order. For wind energy, it s... Reliability. Eaton s integrated systems help harvest the inexhaustible green power of wind. In constant use under the harshest conditions, wind turbines demand extreme reliability and durability from every component. Eaton is a world leading manufacturer of those critical hydraulic, electrical and filtration products. For everyone, it s... 8 Eaton Corporation Sustainability. 65 Lone Oak Road Eden Prairie, MN 55 8-8-8895 www.eaton.com Eaton seeks out and tests the latest environmentally acceptable and biodegradable hydraulic fluids...from all over the world. y leading the way for our customers and their industries, we are working to sustain and safeguard the environment, everywhere our products are at work. Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC-E6 January 8 www.eaton.com -9