SUBMINIATURE SIZE LIMIT SWITCHES SL (AZ3) Micro Limit Switches Quickly upgraded to limit switches with lamps by mounting an LED lamp socket. Rubber cover type (roller ) Compliance with RoHS Directive FEATURES 1. Subminiature limit switch Managed to miniaturize the comparative bulk with high density mountings in the equipment s detector to approximately 1/3 of our own ML limit switches, or approximately 1/1.6 of the Z model microswitch. Approx. 1/3 r 2. A lamp can be easily added for operations checks An exposed terminal type model combined with a socket with cord for the built-in LED lamp (sold separately) easily become a limit switch with lamp. Convenient for maintenance checks such as operations checks. SL exposed terminal type Socket with LED lamp LED lamp SL limit with lamp 3. Operates with a light force Comes in two types: O.F. is a maximum of 1.1N {120gf} (light force model) and light force commensurate to the microswitch.. Terminal uses both solder and tab (#110). Achieves stroke tolerance (O.T./T.T.) of 0.6 Plenty of scope for position fixing with long life. Because of the optimum design of the built-in limit switch and the original L- model spring for use in O.T. absorption, the total travel range has been enlarged, and both position fixing and the unit s lifespan have been improved a level. Stroke range: 3 times more than the ML limit 6. Long life By combining the excellent reliability and solvent proofing of the FS-T microswitch with the L shape spring, we have achieved a unit with both long life and high reliability (electrical life: 10 mechanical life: 10. Built-in safety features and excellent environment proofing The case uses 66 nylon glass fiber the doubly protect the switch. Also, the body and cap have been ultrasonically welded, creating a flush construction except for the terminals. Moreover, by adding a dedicated socket, the construction is drip-proof, dust-proof, and dirt-proof, creating a flush construction for the unit as a whole including the terminals. Rubber cover type: Equivalent to IP60 Socket with cord type: Equivalent to IP6 TYPICAL APPLICATIONS Dust proofing and oil resistance requirement. ML SL PRODUCT TYPE 1. Switch body Hinge Roller Hinge short Short roller Actuator Operating Force (O.F.) Exposed terminal type Rubber cover type Socket with cord type* One-way short roller 2. Socket 1.1N {120gf} AZ3012 AZ312 AZ12 1.96N {200gf} AZ3022 AZ322 AZ22 1.1N {120gf} AZ3013 AZ313 AZ13 1.96N {200gf} AZ3023 AZ323 AZ23 1.96N {200gf} AZ302 AZ32 AZ2 2.9N {300gf} AZ302 AZ32 AZ2 2.9N {300gf} AZ3026 AZ326 AZ26 2.9N {300gf} AZ30 AZ3 AZ Notes) 1. Socket with cord type is combination of; Exposed terminal type + Socket with cord (cord length: 1m 3.21ft.) 2. UL reconized, CSA certified type available. (See page 1.) Applicable limit switches Exposed terminal types Specifications L socket Socket with cord (1 m 3.21ft.) Socket with cord (2 m 6.62ft.) Socket with cord (3 m 9.3ft.) Socket with cord ( m.0ft.) Part No. AZ306 AZ30 AZ3 AZ3 AZ3 All Rights Reserved CYRIGHT Panasonic Electric Works Co., Ltd. Phone: 00.9.012 - Fax:.23.3 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
SL (AZ3) 3. Socket with LED (cord length: 1m 3.21ft.) Applicable limit switches Lamp Connection Lamp rating Part No. 6V DC AZ302 Normally open (N.O.) connection 12V DC AZ301 Expoced terminal types 2 to V DC AZ30 6V DC AZ30362 Normally closed (N.C.) connection 12V DC AZ30361 2 to V DC AZ3036 Notes) 1. Types with 2 to V DC lamp rating are recommended for PC input use. 2. The following cord lengths are also available and lot-produced upon request. Cord length Part No. 2m AZ3 2 6 3m AZ3 3 6 m AZ3 6 FOREIGN STANDARDS The th digit (boxed) of part number denotes the length of cord. Numerals come in the asterisked ( ) digits, which show the lamp specifications. The th digit: 1: N.O. connection, 3: N.C. connection The 9th: None: 2 to V DC, 1: 12V DC, 2: 6V DC Standards Applicable product Part No. UL recognized product File No.: E122222 Ratings: 10 rating A, 20V AC Product type: All products File No.: LR0 Add 9 to the end of the part No. CSA certified product Ratings: 10 rating A, 20V AC Product type: All products excluding types with socket and cord. SPECIFICATIONS 1. Rating Rated control voltage 12V AC 20V AC 30V DC 12V DC Resistive load (cos φ]1) Inductive load (cos φ]0.) 2. Characteristics Contact arrangement A A A 0.1A 2.A 2.A 2.A 0.1A 1 From C Initial contact resistance, max. 60 mω (By voltage drop to 6V DC 1A) Contact material AgNi contact Initial insulation resistance (At 00V DC) Min. 100MΩ Between non-consective terminals 1000 Vrms for 1 min Initial breakdown voltage Between dead metal parts and each terminal 00 Vrms for 1 min Expected life (min. operations) Ambient temperature Ambient humidity Max. operating speed 3. Mechanical characteristics Between ground and each terminal Mechanical Electrical Actuator Hinge Roller 00 Vrms for 1 min 10 (at 60 cpm) 10 (at 20 cpm, A 20V AC resistive) 20 to +60 C - to +10 F Max. 9% R.H. 120 cpm One-way roller Hinge short Short roller One-way short roller Operating Force (O.F.) 1.1N {120gf} 1.96N {200gf} 1.1N {120gf} 1.96N {200gf} 1.96N {200gf} 2.9N {300gf} 2.9N {300gf} 2.9N {300gf} Shock resistance, min. Vibration resistance Actuator In the free position 9m/s 2 {10G} 29m/s 2 {30G} 9m/s 2 {10G} 196m/s 2 {20G} 1m/s 2 {G} 29m/s 2 {30G} 196m/s 2 {20G} 1m/s 2 {G} In the full operating position 29m/s 2 {30G} 29m/s 2 {30G} 29m/s 2 {30G} 29m/s 2 {30G} 29m/s 2 {30G} 29m/s 2 {30G} 29m/s 2 {30G} 29m/s 2 {30G} Vibration rate 10 to Hz 10 to Hz 10 to Hz 10 to Hz 10 to Hz 10 to Hz 10 to Hz Double amplitude 1.mm.09inch 1.0mm.039inch 1.mm.09inch 1.0mm.039inch 1.mm.09inch 1.mm.09inch 1.mm.09inch. Operating characteristics Characteristics O.F.(N{gf}) max. R.F. (N{gf}) min. Pretravel (P.T.), max. mm inch Movement Differential (M.D.), max. mm inch Overtravel (O.T.), min. mm inch Operating Position (O.P.) mm inch Hinge 1.1 {120} 1.96 {200} 0.2 {2} 0.9 {0} 3.0.11 1..09 6.0.236.±1..6±.09 Roller 1.1 {120} 1.96 {200} 0.2 {2} 0.9 {0} 3.0.11 1..09 6.0.236 30.±1. 1.209±.09 1.96 {200} 0.9 {0} 3.0.11 1..09 6.0.236 0.±1. 1.9±.09 Hinge short 2.9 {300} 0.9 {60} 2.0.09 1.0.039 3..13 13.±1..39±.09 Short roller 2.9 {300} 0.9 {60} 2.0.09 1.0.039 3..13.±1. 1.091±.09 One-way short roller 2.9 {300} 0.9 {60} 2.0.09 1.0.039 3..13 36.±1. 1.±.09 Note) For the operating characteristics, refer to the TECHNICAL INFORMATION.. Protective characteristics 6. LED rating Protective construction IEC Rubber cover type Types with socket and cord Rated operating voltage Operating voltage range Internal resistance IP60 IP62 IP63 IP6 6V DC to V DC 2.KΩ 12V DC 9 to 2V DC.KΩ 2 to V DC 20 to V DC KΩ All Rights Reserved CYRIGHT Panasonic Electric Works Co., Ltd. Phone: 00.9.012 - Fax:.23.3 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
DATA 1. Life curve 2.Actual load life curve No. of operations ( 10 ) 1,000 00 100 0 60 0 20 Resistive load 20V AC 1 2 DIMENSIONS 1. Rubber cover Hinge 3 Load current (A) 6 No. of operations ( 10 ) 1,000 00 0. 1 NK HC 3 HP HG 0 260 FC-10 FC-3 00 VC 20 Various relay loads (VA) FC-100 Note: The FC magnetic contactor series is 200V AC. The NK is 2 Form C 2V DC type. Roller SL (AZ3) WIRING DIAGRAMS SL 1 COM 2 N.C. 3 N.O. mm inch AZ312 AZ322 2.1.99 1±0.2.1±.00.±0.1 dia. 61 2.02 2±0.2 1.102±.00 2. 1..96 When rubber cover is removed, teminal details are shown..11 19..6.3±0.1 dia..±1..9±.00.6±.09 mounting hole NC(2) COM(1).6 NO(3) M3 fastening screw 3-tab (#110) terminals (t=0.) 2.1.99 1±0.2.1±.00.±0.1 dia. 2.2 2±0.2 1.102±.00 1. AZ313 AZ323.3±0.1 dia..9±.00 2..96 mounting hole.11 33. 1.3 30.±1. 1.209±.09 12. 12. dia...92 dia. glass fiber General tolerance: ±0. ±.0 Hinge short AZ32 2.1.99 1±0.2.1±.00.±0.1 dia. 2.2 2.9 2±0.2 1.102±.00 2. 1..96.11 3. 1.13 0.±1..3±0.1 dia. 1.9±.09.9±.00 mounting hole. 12.. 12. dia..92 dia. glass fiber AZ32 2.1.99 1±0.2.1±.00.±0.1 dia. 0 1. 2±0.2 1.102±.00 2. 1..96 2 max. (P.T.).09 F.P. (.) O.P..3±0.1 dia. (.61).9±.00 13.±1..39±.09.6 General tolerance: ±0. ±.0 Short roller One-way short roller AZ326 AZ3 2.1.99 1±0.2.1±.00.±0.1 dia. 36 1.1 2±0.2 1.102±.00 1. (29.) (1.9) (O.P.).±1..3±0.1 dia. 1.091±.09.9±.00 2..96 2 max. (P.T.).09 12. 12. dia...92 dia. glass fiber 2.1 36 1.1.99 1±0.2.1±.00.±0.1 dia. 2.9 P.T. 2±0.2 1.102±.00 2. 1..96 All Rights Reserved CYRIGHT Panasonic Electric Works Co., Ltd. 2max..09 (39.) (1.) (O.P.) 36.±1. 1.±.09.3±0.1 dia..9±.00. 12. dia. 12..92 dia. glass fiber. General tolerance: ±0. ±.0 Phone: 00.9.012 - Fax:.23.3 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
SL (AZ3) 2. Exposed terminal type Hinge 3. Socket with cord type mm inch AZ2 AZ3012 AZ3022 2.1.99 1±0.2.1±.00.±0.1 dia. 61 2.02 3max..11.±1. 19..6±.09.6.3±0.1 dia..9±.00 3-tab (#110) terminals (t=0.) 2±0.2 1.102±.00. 1..33.6 2 3 1 10.39 2.1.99 1±0.2.1±.00 2.2 2.9.11 3. 1.13 0.±1. 1.9±.09.3±0.1 dia..9±.00 Vinyl cabtire cord (VCTF) 0. E3 wire. 12.. 12. dia..92 dia. glass fiber..33 23.906 Note) The following types are also available. Roller : AZ3013, AZ3023 : AZ302 Hinge short : AZ302 Short roller : AZ3026 One-way short roller : AZ30.±0.1 dia. 2±0.2 1.102±.00 1. M3 mounting screw 1.0.669 Approx. 1000 39.0 1..3 Black: COM Red: NC White: NO General tolerance: ±0. ±.0 (Combination of the AZ302 exposed terminal type and the AZ30 socket with cord type) Note) The following types are also available. Hinge : AZ12, AZ22 Roller : AZ13, AZ23 Hinge short : AZ2 Short roller : AZ26 One-way short roller : AZ CONNECTION METHOD FOR RUBBER COVER 1) Remove the rubber cover from the 3) Connect lead wire to the receptacle limit switch. terminals (#110) with insulating sleeve provided and insert it into the terminal of limt switch. (The lead wire can directly be soldered to the terminals without using receptacle terminals) ) Push the rubber cover securely over the terminals. 2) After stripping the sheath from the appropriate cord (refer to table on the right) and removing the covering of the lead wires, insert the cord into the rubber cover. Wire name Vinyl cabtire cord (VCTF) Applicable wire Conductor Wire strand Finished outside diameter 0.mm 2 2-wire 6.6mm.260inch dia. 0.mm 2 3-wire.0mm.6inch dia. All Rights Reserved CYRIGHT Panasonic Electric Works Co., Ltd. Phone: 00.9.012 - Fax:.23.3 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
CAUTIONS 1. Ambient conditions 1) The use of these switches under the following conditions should be avoided. If the following conditions should become necessary, we recommend consulting us first. Use where there will be direct con tact with organic solvents, strong acids or alkalis, or direct exposure to their vapors. Use where inflammable or corrosive gases exist. Because these switches are not of water resistant or immersion-proof construction, their use in water or oil should be avoided. Also, locations where water or oil can normally impringe upon the switch or where there is an excessive accumulation of dust should be avoided. 2) To improve reliability during actual use, it is recommended that the operation be checked under installation conditions. 3) If OT is too big, the life of limit switch will be shortened switching friction. Use it with enough margin of OT. 0% of OT standard value will be good for use. ) Do not use the switch in a silicon atmosphere. Case should be taken where organic silicon rubber, adhesive, sealing material, oil, grease or lead wire generates silicon. ) Avoid use in excessively dusty environments where actuator operation would be hindered. 6) When used outdoors (in places where there is exposure to direct sunlight or rain such as in multistory car parks) or in environments where ozone is generated, the influence of these environments may cause deterioration of the rubber material. Please consult us if you intend to use a switch in environments such as these. 2. Mounting and wiring 1) Although SL limit switches have large over-travel (O.T.), excessive O.T. will occur wear and change in its characteristics. Specifically, where there is a need for long life, it is recommended that the proper O.T. as given below should be used. Specifically, where there is a need for long life, it is recommended that the proper O.T. as given below should be used. Within 1 to 3mm.039 to.11inch 2) When the operating object is in the free condition, force should not be applied directly to the actuator. 3) Use their own accessories when mounting and wiring SL limit switches so as to maintain their own characteristics. When the SL rubber cover type is used, there should absolutely be no tension applied to the cord. If there is the fear that tension may be applied, the L socket or socket with cord attached should be used. The maximum permissible tension with the above socket use is 9N{10kgF}. ) The tightening torque when installing this limit switch should be 1.1 to 1. N m (12 to kg cm). SL (AZ3) All Rights Reserved CYRIGHT Panasonic Electric Works Co., Ltd. Phone: 00.9.012 - Fax:.23.3 - Web: www.ctiautomation.net - Email: info@ctiautomation.net