Stainless Steel Traction Gas Springs (Pull ) Stainless steel industrial traction gas springs Material 1.41/1.45, AISI 4/3 (V2A) Material 1.4404/1.4571, AISI 3/3Ti (V4A) In addition to the comprehensive range of industrial gas springs with valve, ACE also offers a wide range of industrial traction gas springs made of stainless steel with body diameters from to 40. This high-quality version is also available on request in all stroke lengths and possible extension forces. The comprehensive range of fitting parts ensures easy installation and makes the gas traction springs universal in use. Stainless steel traction gas springs are used everywhere that raising and lowering is required. Due to their special properties, non-rusting and low magnetism, they are the preferred equipment for medical and cleanroom technology, the foodstuffs industry, electronics and shipbuilding sector. Filled with High Pressure Nitrogen Gas Piston with Seals Stainless Steel Outer Body Seals Stainless Steel Piston Rod Main Bearing The weatherproof ones! Gas Valve Operating fluid: Nitrogen gas Material: Piston rod, body and end fittings: Material 1.41/1.45, AISI 4/3 (V2A) and material 1.4404/1.4571, AISI 3/3Ti (V4A). Mounting: In any position Operating temperature range: - C to 0 C On request: Special force curves, special lengths, alternative seals, wiper. 179 179
Stainless Steel Traction Gas Springs GZ--V4A (Pull ) Traction (Pull) Forces 50 N to 0 N (when Piston Rod Extended up to 5 N) B3,5 M3.5x0. Stud Thread B3,5 Ø 4 Ø. R4 Ø13.5 4 3 Ø 4 4 5 4.1 Ø13 11 M4x0.7 5 +/- 2 5 GZ---V4A 7 GZ--40-V4A 40 7 GZ--50-V4A 50 117 GZ--0-V4A 0 7 GZ--0-V4A 0 7 GZ--0-V4A 0 7 GZ--0-V4A 0 7 GZ--0-V4A 0 217 (Pull ) Body Ø ( ) (0 ) Piston Rod Body Traction Force F 1 0 N GZ--0-AC-0-V4A by the customer to prevent unscrewing (i.e. octite). see page. 4 thick 11 Eye Clevis Fork Ball Socket 7 0 O N GZ--V4A O N see page. fittings, rod shroud. Material: Piston rod, body and end fittings: Material 1.4571/1.4404, AISI 3/3Ti (V4A). Progression: Approx. 23 %, F 2 max. 5 N Available traction force range F 1 at C: 50 N to 0 N Note: ifetime approx. 00 m DE-GAS-3,5 0 Stoßdämpfer GmbH PO Box DE-40740 angenfeld Tel. +49-2173-922-40 Fax +49-2173-922-9 E-Mail: info@ace-int.eu
Stainless Steel Traction Gas Springs GZ--VA (Pull ) Traction (Pull) Forces N to 0 N (when Piston Rod Extended up to 333 N) B Mx1.25 Stud Thread B Ø Ø A-VA C-VA D-VA 22 E-VA R7 Ø Ø 13.5 24 3.1 32 Ø +/- 2 Ø 11.5 Mx1.25 Ø GZ---VA 1 GZ--50-VA 50 0 GZ--0-VA 0 0 GZ--0-VA 0 250 GZ--0-VA 0 0 GZ--250-VA 250 0 (Pull ) Body Ø ( ) (0 ) Piston Rod A-VA Body C-VA Traction Force F 1 0 N GZ--0-AC-0-VA by the customer to prevent unscrewing (i.e. octite). see page 9. thick 32 Eye A-VA max. force 0 N C-VA max. force 10 N Clevis Fork D-VA max. force 0 N Swivel Eye E-VA max. force 0 N G-VA 13 3 Ø Ø13 3 Ball Socket G-VA max. force 10 N Ø 13 W--VA Ø 23 = + DE-GAS- PA-V4A OA-V4A NA-V4A MA-V4A A-VA C-VA D-VA MA-V4A PG-V4A GZ--VA OG-V4A NG-V4A E-VA G-VA see page 9. fittings, wiper. Gas springs and with material 1.4404/ 1.4571 (V4A). Material: Piston rod: Material 1.4401, AISI 3 (V4A). Body and end fittings: Material 1.41, AISI 4 (V2A). Progression: Approx. 11%, F 2 max. 333 N Available traction force range F 1 at C: N to 0 N Note: ifetime approx. 00 m Stoßdämpfer GmbH PO Box DE-40740 angenfeld Tel. +49-2173-922-40 Fax +49-2173-922-9 E-Mail: info@ace-int.eu 1 1
Stainless Steel Traction Gas Springs GZ-2-VA (Pull ) Traction (Pull) Forces 0 N to 00 N (when Piston Rod Extended up to 0 N) B Mx1.5 Stud Thread B A-VA C-VA Ø24 Ø D-VA 2.5 24 E-VA R9 Ø 3 Ø 40 Ø 7 43.1 +/- 2 Ø thick Mx1.5 Ø Ø Ø 2 GZ-2-50-VA 50 5 GZ-2-0-VA 0 2 GZ-2-0-VA 0 25 GZ-2-0-VA 0 3 GZ-2-250-VA 250 GZ-2-0-VA 0 4 GZ-2-0-VA 0 45 GZ-2-400-VA 400 5 GZ-2-450-VA 450 55 GZ-2-500-VA 500 GZ-2-550-VA 550 5 GZ-2-00-VA 00 7 (Pull ) Body Ø (2 ) (0 ) Piston Rod E-VA Body E-VA Traction Force F 1 00 N GZ-2-0-EE-00-VA by the customer to prevent unscrewing (i.e. octite). see page 9. 40 43 Eye A-VA max. force 300 N C-VA max. force 1750 N Clevis Fork D-VA max. force 300 N Swivel Eye E-VA max. force 300 N W-2-VA Ø 32 = + 40 2 DE-GAS- MA-V4A A-VA GZ-2-VA C-VA D-VA E-VA see page 9. fittings, wiper. Gas springs and with material 1.4404/ 1.4571 (V4A). Material: Piston rod, body and end fittings: Material 1.41/1.45, AISI 4/3 (V2A). Progression: Approx. 22%, F 2 max. 0 N Available traction force range F 1 at C: 0 N to 00 N Note: ifetime approx. 00 m 2 Stoßdämpfer GmbH PO Box DE-40740 angenfeld Tel. +49-2173-922-40 Fax +49-2173-922-9 E-Mail: info@ace-int.eu
Stainless Steel Traction Gas Springs GZ-40-VA (Pull ) Traction (Pull) Forces 400 N to 5000 N (when Piston Rod Extended up to 7000 N) B Mx1.5 Stud Thread B Ø 2 Ø 40 A-VA Ø Ø 22 2 D-VA E-VA R.5 Ø 3 Ø.1 5 Ø 13 45 Mx1.5 +/- 2 Ø25.5 42 25 Ø2 GZ-40-0-VA 0 250 GZ-40-0-VA 0 325 GZ-40-0-VA 0 400 GZ-40-250-VA 250 475 GZ-40-0-VA 0 550 GZ-40-400-VA 400 700 GZ-40-500-VA 500 50 GZ-40-00-VA 00 1 000 (Pull ) Body Ø (40 ) (0 ) Piston Rod E-VA Body E-VA Traction Force F 1 00 N GZ-40-0-EE-00-VA by the customer to prevent unscrewing (i.e. octite). see page 0. thick 42 45 5 Eye A-VA max. force 30 N Clevis Fork D-VA Swivel Eye E-VA 57 57 W-40-VA Ø 45 = + 40 DE-GAS- ME-VA A-VA ND-VA GZ-40-VA D-VA ME-VA E-VA see page 0. On request: Increased traction force, special force curves, special lengths, alternative end fittings, wiper. Gas springs and with material 1.4404/1.4571 (V4A). Material: Piston rod, body and end fittings: Material 1.41/1.45, AISI 4/3 (V2A). Progression: Approx. 40 %, F 2 max. 7000 N Available traction force range F 1 at C: 400 N to 5000 N Note: ifetime approx. 00 m Stoßdämpfer GmbH PO Box DE-40740 angenfeld Tel. +49-2173-922-40 Fax +49-2173-922-9 E-Mail: info@ace-int.eu 3 3