Itelliget Drivesystems, Worldwide Services EN SURFACE PROTECTION FOR NORD DRIVE SOLUTIONS
PROTECTING THE ENVIRONMENT WITH HIGH-SOLID PAINT Less solvets ad greater efficiecy We use the latest geeratio of high-solid paits, which reduces the emissio of solvets far below the legally required limits. By complyig with the VOC balace we make a importat cotributio to protectig the eviromet. High solid paits cotai a high proportio of solid material - up to 80% - ad with a low solvet cotet of oly approximately 20%, cotribute cosiderably less evirometal pollutio tha other idustrial paits. The high-solid paits which we use combie the emissio beefits of hydro paits with the fuctioality of solvet-based coatig materials. I additio, the lower solvet proportio allows very short dryig times i productio - a decisive advatage over water-based pait systems. The substrates materials for water-based pait systems have to be cleaed ad de-greased with solvets before they are paited. Ultimately, our customers beefit from faster productio ad delivery times. Eergy efficiecy as a compay philosophy NORD drive solutios are especially valued for their great eergy efficiecy. We also use the same optimisatio stadards for productio i our factories. SOLVENT REDUCTION STANDARD Covetioal system MANKIEWICZ High-Solid system 40 % Solids up to 80 % Solids PROCESS OPTIMISATION STANDARD Covetioal system MANKIEWICZ High-Solid system Paitig Dryig 4.0 hours 2.0 hours Optimum protectio for every applicatio Our coatig systems have bee successfully tested by a idepedet laboratory: Cross cut test accordig to DIN EN ISO 2409 to test the adhesio of the pait system. Salt spray test accordig to DIN EN ISO 9227 to test corrosio resistace. Evaluatio of degree of delamiatio accordig to DIN EN ISO 4628-8. 2 Surface protectio for NORD drive solutios www.ord.com
COPING WITH CONTAMINATION WITH THE RIGHT COATING SYSTEM Coatigs ad their fields of applicatio Coatig Field of applicatio Structure 2.0 C2 as per EN 12944 Idoor istallatio 3.0 C2 as per EN 12944 For idoor istallatio ad protected outdoor istallatio (e.g. ope, uheated halls) 3.1 C3 as per EN 12944 Outdoor istallatio, city ad idustrial atmosphere with low cotamiatio 3.2 C4 as per EN 12944 Outdoor istallatio, city ad idustrial atmosphere with moderate cotamiatio 20 % Lösemittel 3.3 C5 as per EN 12944 Outdoor istallatio, city ad idustrial atmosphere with high cotamiatio, fillig of all screw heads, holes ad gaps. PROZESSOPTIMIERUNG 3.4 For ormall chemical cotamiatio 3.5 For food packagig areas Z Compesatio of cotour recesses ad crevices with polyurethae sealat A Additioal atimicrobial coatig for all paits except 3.4 ud 3.5 www.ord.com Surface protectio for NORD drive solutios 3
CLEAN APPEARANCE IN YOUR CORPORATE COLOUR Globally valid quality for your corporate idetity Throughout the world, NORD DRIVESYSTEMS offers you a uiform series of stadard colours as well as preferred colours. I additio we also implemet idividual solutios accordig to your specificatios, which optimally match the corporate desig of your compay. Stadard colours are held i stock i our paitig facilities throughout the world ad are therefore always available: RAL 7031 Blue-Grey RAL 5010 Blue Special colours accordig to RAL, BS, Musell, Patoe or eve accordig to colour samples ca be supplied agaist extra charge. 4 Surface protectio for NORD drive solutios www.ord.com
PRESERVE SAFETY WITH THE RIGHT TOP COAT Tested pait systems for special requiremets The pait systems used by NORD uses are resistat to chemicals. They have bee tested for their resistace to all importat substaces which could have a egative evirometal effect. After full dryig of the pait system, NORD paits are suitable for foodstuffs ad fulfil the NSF / ANSI 51-2009e test criteria. No further top coats are required. Atibacterial paits are possible for all pait systems. For this, a fial clear lacquer cotaiig atimicrobial silver io particles (layer thickess approx. 40µm) is applied, which does ot affect the colour. Powder coatig for decetralised drive techology Because of their extremely robust ad durable properties, powder coatigs are very suitable for the electrical idustry. Surfaces which are treated i this way are resistat to impact, scratches ad wear. They are resistat to weather ad chemicals ad are eve more robust tha covetioal NORD paits. Evirometally friedly high performace coatigs for SK 200E series decetralised frequecy iverters with IP66 protectio class. I the electrical idustry, the ati-static properties of electrically coductig powder paits are relevat for the prevetio of static chargig of the drive uits. Potetial iterferece is elimiated ad dow time probability is miimised. The subject of evirometal protectio is becomig icreasigly importat i the field of surface coatigs. Powder coatig does ot use solvets, but rather dry powder, which is melted oto the workpiece i a kil. www.ord.com Surface protectio for NORD drive solutios 5
THE ALTERNATIVE TO STAINLESS STEEL sd tuph SURFACE AND CORROSION PROTECTION Sealed Surface Coversio System Geared motors from NORD with sd tuph are the optimal choice for use i challegig evirometal coditios. Stailess steel shafts Special shaft sealig rigs Food-compatible oil Products available with sd tuph: Easy to clea surfaces sd tuph for extreme requiremets Resistat to acids ad alkalis (wide ph rage) No spreadig of corrosio, eve if damaged No flakig Corrosio resistat, prevets cotact corrosio Alterative to stailess steel Coforms to FDA Title 21 CFR 175.300 Free from chromates Food & beverage idustry Dairies Pharmaceutical idustry Water ad sewage plats Car washes Offshore ad coastal areas Cleaig with chemicals (washdow, wide ph rage) Tests performed o surface-treated alumiium housig compoets: Helical gear uits Bevel gear uits The complete solutio for extreme coditios Surface-treated housig compoets DIN ad stadard compoets made from stailess steel Washdow housig (gear uit ad motor) ASTM D714 Blister formatio ASTM D610-08 Corrosio ASTM D1654-08 Scratchig ASTM B117-09 Salt spray test ASTM D3170 Gravelometer test DIN EN ISO 9227 Salt spray mist test DIN EN ISO 2409 Cross-cut test UNIVERSAL worm gear uits NORD smooth motor with sd tuph Smooth motors Electroic SK 1xxE 6 Surface protectio for NORD drive solutios www.ord.com
NORD DRIVESYSTEMS Group Headquarters ad Techology Cetre i Bargteheide, close to Hamburg Mechacial products Electrical products Electroical products Gear uits Motors Iverters, motors starters ad field distributio systems Iovative drive solutios for more tha 100 braches of idustry 7 state-of-the-art productio plats produce gear uits, motors ad iverters also for complete drive solutios from a sigle source. Gear uit productio Motor productio Iverter productio Subsidiaries ad sales parters i 98 coutries o 5 cotiets provide local stocks, assembly, productio, techical support ad customer service The map image above is for iformatio purpose ad may ot have bee prepared or be suitable for legal purpose ad we do ot ow ay resposibility for correctess or autheticity of the same. More tha 3,600 employees throughout the world create customer orieted solutios www.ord.com Surface protectio for NORD drive solutios 7
NORD DRIVESYSTEMS Group Headquarters ad Techology Cetre i Bargteheide, close to Hamburg Iovative drive solutios for more tha 100 braches of idustry Mechaical products parallel shaft, helical gear, bevel gear ad worm gear uits Electrical products IE2/IE3/IE4 motors Electroic products cetralised ad decetralised frequecy iverters, motor starters ad field distributio systems 7 state-of-the-art productio plats for all drive compoets Subsidiaries ad sales parters i 98 coutries o 5 cotiets provide local stocks, assembly, productio, techical support ad customer service More tha 3,600 employees throughout the world create customer orieted solutios www.ord.com/locator Headquarters: Getriebebau NORD GmbH & Co. KG Getriebebau-Nord-Straße 1 22941 Bargteheide, Germay T +49 (0) 4532 / 289-0 F +49 (0) 4532 / 289-22 53 ifo@ord.com, www.ord.com Member of the NORD DRIVESYSTEMS Group S3400 Mat.-Nr. 6064602 / 4017