Bavaria Downs. Chaska, MN. Lighting

Bavaria Downs Chaska, MN Lighting Jason Kinsella City View Electric, Inc. 14309 Lake Drive NE Columbus, MN 55025 Phone 651.659.9496 Fax 651.659.0905 cityviewelectric.com

DESCRIPTION Lumark The Prevail TM LED pole and fixture combination makes selection and installation of poles and fixtures simple. Included is the die-cast Prevail area, site and roadway luminaire with standard mounting arm, square straight steel pole, anchor bolts, base cover, template and hardware. Stock configurations are available in single and dual fixture combinations. The Prevail luminaire delivers a new level of versatility and value in patent pending, architectural design that delivers energy savings greater than 62% and replaces 150-450W metal halide fixtures. The Prevail fixture and pole combo is ideal for general area/site lighting applications. Catalog # Project Comments Prepared by Type Date SPECIFICATION FEATURES Construction Construction is comprised of a heavy-duty, single-piece die-cast aluminum housing in dark bronze polyester powder paint. The diecast aluminum door is tethered to provide easy access to the driver if replacement is required. The optics is mounted on a versatile, aluminum plate that dissipates heat from the LEDs resulting in longer life of the fixture. The fixture is IP66 and 3G vibration rated (ANSI C136.31). Optics Available in Type III and IV distributions with lumen packages ranging from 6,173 to 18,992 nominal lumens. Light engine configurations consist of 1 or 2 high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (up to L92/60,000 hours at 25 C) per IESNA TM-21. For the ultimate level of spill light control, an optional house side shield accessory can be field or factory installed. Electrical Available in 120-277V 50/60Hz. 10kV/10kA surge protection standard. 0-10V dimming driver is standard with leads external to the fixture to accommodate controls capability such as dimming and occupancy. Suitable for ambient temperatures from -40 C to 40 C. Controls An integrated dimming and occupancy sensor is available in bi-level dimming (MSP/DIM) operation. Mounting The versatile, patent pending, standard mount arm accommodates multiple drill patterns ranging from 1-1/2 to 4-7/8. Removal of the door on the standard mounting arm enables wiring of the fixture without having to access the driver compartment. A knock-out on the standard mounting arm enables round pole mounting. Pole Shaft is one-piece construction ASTM A500 grade B steel, shot blasted and finished in dark bronze polyester powder coat. Anchor base is fabricated from ASTM grade steel. ASTM A366 steel full base cover is provided to enclose base plate and anchor bolts. Anchor bolts are per ASTM A576 with two nuts, two flat washers, and one lock washer. Hardware and threaded portion of bolt are hot dip galvanized. 3 hook for 3/4 bolt. 4 hook for 1 bolt. Finish Housing and cast parts finished in five-stage super TGIC polyester bronze powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. Warranty Five-year warranty. PFPRV PREVAIL POLE AND FIXTURE COMBO LED POLE AND FIXTURE COMBO DIMENSIONS 2-3/4" [70mm] 13-15/16" [354mm] 26-13/16" [681mm] 15 20 25 30 CERTIFICATION DATA UL and cul Wet Location Listed IP66-Rated 3G Vibration Rated ISO 9001 DesignLights Consortium TM Qualified* POLE MOUNT ARM 6-15/16" [177mm] 1-1/4" [32mm] 4" [102mm] 4-7/8" [124mm] Base View ENERGY DATA Electronic LED Driver 0.9 Power Factor <20% Total Harmonic Distortion 120-277V/50 and 60Hz, 347V/60Hz, 480V/60Hz -40 C Minimum Temperature Rating +40 C Ambient Temperature Rating 4-15/16" [125mm] 3-3/4" [96mm] 9/16" [15mm] Dia. Hole 4-5 EPA Effective Projected Area (Sq. Ft.): 0.75 (1 fixture) SHIPPING DATA Approximate Net Weight: 20lbs. [9.09 kgs.] (1 fixture) SYSTEMS *www.designlights.org C E R T I F I E D TD500029EN 2017-04-18 15:12:50

PFPRV PREVAIL POLE AND FIXTURE COMBO ORDERING INFORMATION Sample Number: PFPRV-1-A25-T3-15-N/AB 1, 2, 3 Number Series of Fixtures Light Engine Distribution Pole Height Maximum Wind Zone (MPH) Options (Add as Suffix) Accessories (Order Separately) PFPRV=Prevail Prevail Pole and Fixture Combo 1=1 2=2 3=3 4=4 A15=(1 LED) 6,100 Nominal Lumens A25=(2 LED) 10,200 Nominal Lumens A40=(2 LED) 15,100 Nominal Lumens A60=(2 LED) 18,900 Nominal Lumens T3=Type III T4=Type T e IV 15=15' 20=20' 25=25' 30=30' Blank=80 9=90 0=100 N/AB= No Anchor Bolts (Used when ordered separately) HSS= House Side Shield MSP/DIM-L12= Integrated Sensor for Dimming Operation, 8' - 12' Mounting Height MSP/DIM-L30= Integrated Sensor for Dimming Operation, 12' - 30' Mounting Height PER= NEMA 3PIN Twistlock Photocontrol Receptacle 4 PER7= NEMA 7PIN Twistlock Photocontrol Receptacle 4 HS/VERD= House Side Shield NOTES: 1 4000K CCT, standard bronze, 120-277V, 0-10V dimming. 2 Standard mount arm included with fixture. Supplied with straight steel shaft, anchor bolts, template, base cover and hardware. 3 DesignLights ConsortiumTM Qualified and classified for DLC standard, refer to www.designlights.org for details. 4 Not available with MSP options. POWER AND LUMENS LUMEN MAINTENANCE Light Engine A15 A25 A40 A60 Nominal Power (Watts) 57W 87W 143W 163W Input Current @ 120V (A) 0.49 0.76 1.23 1.34 Input Current @ 277V (A) 0.22 0.35 0.54 0.60 Input Current @ 347V (A) 0.18 0.28 0.45 0.49 Input Current @ 480V (A) 0.13 0.21 0.33 0.35 Lumens 6,139 10,204 15,073 18,830 Type II BUG Rating B1-U0-G1 B2-U0-G2 B3-U0-G3 B3-U0-G3 Lumens 6,192 10,292 15,203 18,992 Type III BUG Rating B1-U0-G2 B2-U0-G3 B2-U0-G3 B3-U0-G4 Lumens 6,173 10,261 15,157 18,935 Type IV BUG Rating B1-U0-G3 B2-U0-G3 B2-U0-G4 B2-U0-G5 Lumens 6,393 10,627 15,697 19,610 Type V BUG Rating B3-U0-G3 B4-U0-G3 B4-U0-G4 B5-U0-G4 Ambient Temperature 25,000 Hours* 50,000 Hours* 60,000 Hours* Theoretical 100,000 Hours Theoretical L70 (Hours)* 25ºC > 96% > 93% > 92% > 87% > 260,000 40ºC > 96% > 93% > 92% > 87% > 255,000 50ºC > 95% > 92% > 91% > 86% > 250,000 * Per IESNA TM-21 data. LUMEN MULTIPLIER Ambient Temperature Lumen Multiplier 10ºC 1.02 15ºC 1.01 25ºC 1.00 40ºC 0.99 NOTE: Lumen output for standard bronze fixture color. Different housing colors impact lumen output. IES files for the non-standard colors are available upon request. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting Specifications and dimensions subject to change without notice. TD500029EN 2017-04-18 15:12:50

PFPRV PREVAIL POLE AND FIXTURE COMBO ONE FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90 AND 100MPH WIND ZONES USE A 5" POLE) EPA=0.75 T3=18,992 T4=18,935 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) 80 90 100 HID Equivalent (Wattage) 6,192 Type III PFPRV-1-A15-T3-15 2 PFPRV-1-A15-T3-15-9 2 PFPRV-1-A15-T3-15-0 2 150W 6,173 Type IV PFPRV-1-A15-T4-15 2 PFPRV-1-A15-T4-15-9 2 PFPRV-1-A15-T4-15-0 2 150W 10,292 Type III PFPRV-1-A25-T3-15 2 PFPRV-1-A25-T3-15-9 2 PFPRV-1-A25-T3-15-0 2 250W 10,261 Type IV PFPRV-1-A25-T4-15 2 PFPRV-1-A25-T4-15-9 2 PFPRV-1-A25-T4-15-0 2 250W 15,203 Type III PFPRV-1-A40-T3-15 2 PFPRV-1-A40-T3-15-9 2 PFPRV-1-A40-T3-15-0 2 400W 15,157 Type IV PFPRV-1-A40-T4-15 2 PFPRV-1-A40-T4-15-9 2 PFPRV-1-A40-T4-15-0 2 400W 18,992 Type III PFPRV-1-A60-T3-15 2 PFPRV-1-A60-T3-15-9 2 PFPRV-1-A60-T3-15-0 2 450W 18,935 Type IV PFPRV-1-A60-T4-15 2 PFPRV-1-A60-T4-15-9 2 PFPRV-1-A60-T4-15-0 2 450W 6,192 Type III PFPRV-1-A15-T3-20 2 PFPRV-1-A15-T3-20-9 2 PFPRV-1-A15-T3-20-0 2 150W 6,173 Type IV PFPRV-1-A15-T4-20 2 PFPRV-1-A15-T4-20-9 2 PFPRV-1-A15-T4-20-0 2 150W 10,292 Type III PFPRV-1-A25-T3-20 2 PFPRV-1-A25-T3-20-9 2 PFPRV-1-A25-T3-20-0 2 250W 10,261 Type IV PFPRV-1-A25-T4-20 2 PFPRV-1-A25-T4-20-9 2 PFPRV-1-A25-T4-20-0 2 250W 15,203 Type III PFPRV-1-A40-T3-20 2 PFPRV-1-A40-T3-20-9 2 PFPRV-1-A40-T3-20-0 2 400W 15,157 Type IV PFPRV-1-A40-T4-20 2 PFPRV-1-A40-T4-25-9 2 PFPRV-1-A40-T4-20-0 2 400W 18,992 Type III PFPRV-1-A60-T3-20 2 PFPRV-1-A60-T3-20-9 2 PFPRV-1-A60-T3-20-0 2 450W 18,935 Type IV PFPRV-1-A60-T4-20 2 PFPRV-1-A60-T4-20-9 2 PFPRV-1-A60-T4-20-0 2 450W 6,192 Type III PFPRV-1-A15-T3-25 2 PFPRV-1-A15-T3-25-9 2 PFPRV-1-A15-T3-25-0 2 150W 6,173 Type IV PFPRV-1-A15-T4-25 2 PFPRV-1-A15-T4-25-9 2 PFPRV-1-A15-T4-25-0 2 150W 10,292 Type III PFPRV-1-A25-T3-25 2 PFPRV-1-A25-T3-25-9 2 PFPRV-1-A25-T3-25-0 2 250W 10,261 Type IV PFPRV-1-A25-T4-25 2 PFPRV-1-A25-T4-25-9 2 PFPRV-1-A25-T4-25-0 2 250W 15,203 Type III PFPRV-1-A40-T3-25 2 PFPRV-1-A40-T3-25-9 2 PFPRV-1-A40-T3-25-0 2 400W 15,157 Type IV PFPRV-1-A40-T4-25 2 PFPRV-1-A40-T4-25-9 2 PFPRV-1-A40-T4-25-0 2 400W 18,992 Type III PFPRV-1-A60-T3-25 2 PFPRV-1-A60-T3-25-9 2 PFPRV-1-A60-T3-25-0 2 450W 18,935 Type IV PFPRV-1-A60-T4-25 2 PFPRV-1-A60-T4-25-9 2 PFPRV-1-A60-T4-25-0 2 450W 6,192 Type III PFPRV-1-A15-T3-30 3 PFPRV-1-A15-T3-30-9 3 PFPRV-1-A15-T3-30-0 4 150W 6,173 Type IV PFPRV-1-A15-T4-30 3 PFPRV-1-A15-T4-30-9 3 PFPRV-1-A15-T4-30-0 4 150W 10,292 Type III PFPRV-1-A25-T3-30 3 PFPRV-1-A25-T3-30-9 3 PFPRV-1-A25-T3-30-0 4 250W 10,261 Type IV PFPRV-1-A25-T4-30 3 PFPRV-1-A25-T4-30-9 3 PFPRV-1-A25-T4-30-0 4 250W 15,203 Type III PFPRV-1-A40-T3-30 3 PFPRV-1-A40-T3-30-9 3 PFPRV-1-A40-T3-30-0 4 400W 15,157 Type IV PFPRV-1-A40-T4-30 3 PFPRV-1-A40-T4-30-9 3 PFPRV-1-A40-T4-30-0 4 400W 18,992 Type III PFPRV-1-A60-T3-30 3 PFPRV-1-A60-T3-30-9 3 PFPRV-1-A60-T3-30-0 4 450W 18,935 Type IV PFPRV-1-A60-T4-30 3 PFPRV-1-A60-T4-30-9 3 PFPRV-1-A60-T4-30-0 4 450W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for stocked configurations and availability. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting Specifications and dimensions subject to change without notice. TD500029EN 2017-04-18 15:12:50

PFPRV PREVAIL POLE AND FIXTURE COMBO TWO FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 100MPH WIND ZONE USE 5" POLES) EPA=1.50 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) 80 90 100 HID Equivalent (Wattage) 6,192 Type III PFPRV-2-A15-T3-15 2 PFPRV-2-A15-T3-15-9 2 PFPRV-2-A15-T3-15-0 2 150W 6,173 Type IV PFPRV-2-A15-T4-15 2 PFPRV-2-A15-T4-15-9 2 PFPRV-2-A15-T4-15-0 2 150W 10,292 Type III PFPRV-2-A25-T3-15 2 PFPRV-2-A25-T3-15-9 2 PFPRV-2-A25-T3-15-0 2 250W 10,261 Type IV PFPRV-2-A25-T4-15 2 PFPRV-2-A25-T4-15-9 2 PFPRV-2-A25-T4-15-0 2 250W 15,203 Type III PFPRV-2-A40-T3-15 2 PFPRV-2-A40-T3-15-9 2 PFPRV-2-A40-T3-15-0 2 400W 15,157 Type IV PFPRV-2-A40-T4-15 2 PFPRV-2-A40-T4-15-9 2 PFPRV-2-A40-T4-15-0 2 400W 18,992 Type III PFPRV-2-A60-T3-15 2 PFPRV-2-A60-T3-15-9 2 PFPRV-2-A60-T3-15-0 2 450W 18,935 Type IV PFPRV-2-A60-T4-15 2 PFPRV-2-A60-T4-15-9 2 PFPRV-2-A60-T4-15-0 2 450W 6,192 Type III PFPRV-2-A15-T3-20 2 PFPRV-2-A15-T3-20-9 2 PFPRV-2-A15-T3-20-0 2 150W 6,173 Type IV PFPRV-2-A15-T4-20 2 PFPRV-2-A15-T4-20-9 2 PFPRV-2-A15-T4-20-0 2 150W 10,292 Type III PFPRV-2-A25-T3-20 2 PFPRV-2-A25-T3-20-9 2 PFPRV-2-A25-T3-20-0 2 250W 10,261 Type IV PFPRV-2-A25-T4-20 2 PFPRV-2-A25-T4-20-9 2 PFPRV-2-A25-T4-20-0 2 250W 15,203 Type III PFPRV-2-A40-T3-20 2 PFPRV-2-A40-T3-20-9 2 PFPRV-2-A40-T3-20-0 2 400W 15,157 Type IV PFPRV-2-A40-T4-20 2 PFPRV-2-A40-T4-25-9 2 PFPRV-2-A40-T4-20-0 2 400W 18,992 Type III PFPRV-2-A60-T3-20 2 PFPRV-2-A60-T3-20-9 2 PFPRV-2-A60-T3-20-0 2 450W 18,935 Type IV PFPRV-2-A60-T4-20 2 PFPRV-2-A60-T4-20-9 2 PFPRV-2-A60-T4-20-0 2 450W 6,192 Type III PFPRV-2-A15-T3-25 2 PFPRV-2-A15-T3-25-9 2 PFPRV-2-A15-T3-25-0 3 150W 6,173 Type IV PFPRV-2-A15-T4-25 2 PFPRV-2-A15-T4-25-9 2 PFPRV-2-A15-T4-25-0 3 150W 10,292 Type III PFPRV-2-A25-T3-25 2 PFPRV-2-A25-T3-25-9 2 PFPRV-2-A25-T3-25-0 3 250W 10,261 Type IV PFPRV-2-A25-T4-25 2 PFPRV-2-A25-T4-25-9 2 PFPRV-2-A25-T4-25-0 3 250W 15,203 Type III PFPRV-2-A40-T3-25 2 PFPRV-2-A40-T3-25-9 2 PFPRV-2-A40-T3-25-0 3 400W 15,157 Type IV PFPRV-2-A40-T4-25 2 PFPRV-2-A40-T4-25-9 2 PFPRV-2-A40-T4-25-0 3 400W 18,992 Type III PFPRV-2-A60-T3-25 2 PFPRV-2-A60-T3-25-9 2 PFPRV-2-A60-T3-25-0 3 450W 18,935 Type IV PFPRV-2-A60-T4-25 2 PFPRV-2-A60-T4-25-9 2 PFPRV-2-A60-T4-25-0 3 450W 6,192 Type III PFPRV-2-A15-T3-30 3 PFPRV-2-A15-T3-30-9 3 PFPRV-2-A15-T3-30-0 4 150W 6,173 Type IV PFPRV-2-A15-T4-30 3 PFPRV-2-A15-T4-30-9 3 PFPRV-2-A15-T4-30-0 4 150W 10,292 Type III PFPRV-2-A25-T3-30 3 PFPRV-2-A25-T3-30-9 3 PFPRV-2-A25-T3-30-0 4 250W 10,261 Type IV PFPRV-2-A25-T4-30 3 PFPRV-2-A25-T4-30-9 3 PFPRV-2-A25-T4-30-0 4 250W 15,203 Type III PFPRV-2-A40-T3-30 3 PFPRV-2-A40-T3-30-9 3 PFPRV-2-A40-T3-30-0 4 400W 15,157 Type IV PFPRV-2-A40-T4-30 3 PFPRV-2-A40-T4-30-9 3 PFPRV-2-A40-T4-30-0 4 400W 18,992 Type III PFPRV-2-A60-T3-30 3 PFPRV-2-A60-T3-30-9 3 PFPRV-2-A60-T3-30-0 4 450W 18,935 Type IV PFPRV-2-A60-T4-30 3 PFPRV-2-A60-T4-30-9 3 PFPRV-2-A60-T4-30-0 4 450W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for stocked configurations and availability. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting Specifications and dimensions subject to change without notice. TD500029EN 2017-04-18 15:12:50

Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) 80 90 100 PFPRV PREVAIL POLE AND FIXTURE COMBO THREE FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 90, 100MPH WIND ZONE USE 5" POLES) EPA=2.25 HID Equivalent (Wattage) 6,192 Type III PFPRV-3-A15-T3-15 2 PFPRV-3-A15-T3-15-9 2 PFPRV-3-A15-T3-15-0 2 150W 6,173 Type IV PFPRV-3-A15-T4-15 2 PFPRV-3-A15-T4-15-9 2 PFPRV-3-A15-T4-15-0 2 150W 10,292 Type III PFPRV-3-A25-T3-15 2 PFPRV-3-A25-T3-15-9 2 PFPRV-3-A25-T3-15-0 2 250W 10,261 Type IV PFPRV-3-A25-T4-15 2 PFPRV-3-A25-T4-15-9 2 PFPRV-3-A25-T4-15-0 2 250W 15,203 Type III PFPRV-3-A40-T3-15 2 PFPRV-3-A40-T3-15-9 2 PFPRV-3-A40-T3-15-0 2 400W 15,157 Type IV PFPRV-3-A40-T4-15 2 PFPRV-3-A40-T4-15-9 2 PFPRV-3-A40-T4-15-0 2 400W 18,992 Type III PFPRV-3-A60-T3-15 2 PFPRV-3-A60-T3-15-9 2 PFPRV-3-A60-T3-15-0 2 450W 18,935 Type IV PFPRV-3-A60-T4-15 2 PFPRV-3-A60-T4-15-9 2 PFPRV-3-A60-T4-15-0 2 450W 6,192 Type III PFPRV-3-A15-T3-20 2 PFPRV-3-A15-T3-20-9 2 PFPRV-3-A15-T3-20-0 2 150W 6,173 Type IV PFPRV-3-A15-T4-20 2 PFPRV-3-A15-T4-20-9 2 PFPRV-3-A15-T4-20-0 2 150W 10,292 Type III PFPRV-3-A25-T3-20 2 PFPRV-3-A25-T3-20-9 2 PFPRV-3-A25-T3-20-0 2 250W 10,261 Type IV PFPRV-3-A25-T4-20 2 PFPRV-3-A25-T4-20-9 2 PFPRV-3-A25-T4-20-0 2 250W 15,203 Type III PFPRV-3-A40-T3-20 2 PFPRV-3-A40-T3-20-9 2 PFPRV-3-A40-T3-20-0 2 400W 15,157 Type IV PFPRV-3-A40-T4-20 2 PFPRV-3-A40-T4-25-9 2 PFPRV-3-A40-T4-20-0 2 400W 18,992 Type III PFPRV-3-A60-T3-20 2 PFPRV-3-A60-T3-20-9 2 PFPRV-3-A60-T3-20-0 2 450W 18,935 Type IV PFPRV-3-A60-T4-20 2 PFPRV-3-A60-T4-20-9 2 PFPRV-3-A60-T4-20-0 2 450W 6,192 Type III PFPRV-3-A15-T3-25 2 PFPRV-3-A15-T3-25-9 3 PFPRV-3-A15-T3-25-0 3 150W 6,173 Type IV PFPRV-3-A15-T4-25 2 PFPRV-3-A15-T4-25-9 3 PFPRV-3-A15-T4-25-0 3 150W 10,292 Type III PFPRV-3-A25-T3-25 2 PFPRV-3-A25-T3-25-9 3 PFPRV-3-A25-T3-25-0 3 250W 10,261 Type IV PFPRV-3-A25-T4-25 2 PFPRV-3-A25-T4-25-9 3 PFPRV-3-A25-T4-25-0 3 250W 15,203 Type III PFPRV-3-A40-T3-25 2 PFPRV-3-A40-T3-25-9 3 PFPRV-3-A40-T3-25-0 3 400W 15,157 Type IV PFPRV-3-A40-T4-25 2 PFPRV-3-A40-T4-25-9 3 PFPRV-3-A40-T4-25-0 3 400W 18,992 Type III PFPRV-3-A60-T3-25 2 PFPRV-3-A60-T3-25-9 3 PFPRV-3-A60-T3-25-0 3 450W 18,935 Type IV PFPRV-3-A60-T4-25 2 PFPRV-3-A60-T4-25-9 3 PFPRV-3-A60-T4-25-0 3 450W 6,192 Type III PFPRV-3-A15-T3-30 3 PFPRV-3-A15-T3-30-9 4 PFPRV-3-A15-T3-30-0 4 150W 6,173 Type IV PFPRV-3-A15-T4-30 3 PFPRV-3-A15-T4-30-9 4 PFPRV-3-A15-T4-30-0 4 150W 10,292 Type III PFPRV-3-A25-T3-30 3 PFPRV-3-A25-T3-30-9 4 PFPRV-3-A25-T3-30-0 4 250W 10,261 Type IV PFPRV-3-A25-T4-30 3 PFPRV-3-A25-T4-30-9 4 PFPRV-3-A25-T4-30-0 4 250W 15,203 Type III PFPRV-3-A40-T3-30 3 PFPRV-3-A40-T3-30-9 4 PFPRV-3-A40-T3-30-0 4 400W 15,157 Type IV PFPRV-3-A40-T4-30 3 PFPRV-3-A40-T4-30-9 4 PFPRV-3-A40-T4-30-0 4 400W 18,992 Type III PFPRV-3-A60-T3-30 3 PFPRV-3-A60-T3-30-9 4 PFPRV-3-A60-T3-30-0 4 450W 18,935 Type IV PFPRV-3-A60-T4-30 3 PFPRV-3-A60-T4-30-9 4 PFPRV-3-A60-T4-30-0 4 450W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for availability. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting Specifications and dimensions subject to change without notice. TD500029EN 2017-04-18 15:12:50

PFPRV PREVAIL POLE AND FIXTURE COMBO FOUR FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 100MPH WIND ZONE USE 5" POLES) EPA=3.00 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) 80 90 100 HID Equivalent (Wattage) 6,192 Type III PFPRV-4-A15-T3-15 2 PFPRV-4-A15-T3-15-9 2 PFPRV-4-A15-T3-15-0 2 150W 6,173 Type IV PFPRV-4-A15-T4-15 2 PFPRV-4-A15-T4-15-9 2 PFPRV-4-A15-T4-15-0 2 150W 10,292 Type III PFPRV-4-A25-T3-15 2 PFPRV-4-A25-T3-15-9 2 PFPRV-4-A25-T3-15-0 2 250W 10,261 Type IV PFPRV-4-A25-T4-15 2 PFPRV-4-A25-T4-15-9 2 PFPRV-4-A25-T4-15-0 2 250W 15,203 Type III PFPRV-4-A40-T3-15 2 PFPRV-4-A40-T3-15-9 2 PFPRV-4-A40-T3-15-0 2 400W 15,157 Type IV PFPRV-4-A40-T4-15 2 PFPRV-4-A40-T4-15-9 2 PFPRV-4-A40-T4-15-0 2 400W 18,992 Type III PFPRV-4-A60-T4-15 2 PFPRV-4-A60-T4-15-9 2 PFPRV-4-A60-T4-15-0 2 450W 18,935 Type IV PFPRV-4-A60-T4-15 2 PFPRV-4-A60-T4-15-9 2 PFPRV-4-A60-T4-15-0 2 450W 6,192 Type III PFPRV-4-A15-T3-20 2 PFPRV-4-A15-T3-20-9 2 PFPRV-4-A15-T3-20-0 2 150W 6,173 Type IV PFPRV-4-A15-T4-20 2 PFPRV-4-A15-T4-20-9 2 PFPRV-4-A15-T4-20-0 2 150W 10,292 Type III PFPRV-4-A25-T3-20 2 PFPRV-4-A25-T3-20-9 2 PFPRV-4-A25-T3-20-0 2 250W 10,261 Type IV PFPRV-4-A25-T4-20 2 PFPRV-4-A25-T4-20-9 2 PFPRV-4-A25-T4-20-0 2 250W 15,203 Type III PFPRV-4-A40-T3-20 2 PFPRV-4-A40-T3-20-9 2 PFPRV-4-A40-T3-20-0 2 400W 15,157 Type IV PFPRV-4-A40-T4-20 2 PFPRV-4-A40-T4-25-9 2 PFPRV-4-A40-T4-20-0 2 400W 18,992 Type III PFPRV-4-A60-T4-20 2 PFPRV-4-A60-T4-20-9 2 PFPRV-4-A60-T4-20-0 2 450W 18,935 Type IV PFPRV-4-A60-T4-20 2 PFPRV-4-A60-T4-20-9 2 PFPRV-4-A60-T4-20-0 2 450W 6,192 Type III PFPRV-4-A15-T3-25 2 PFPRV-4-A15-T3-25-9 3 PFPRV-4-A15-T3-25-0 3 150W 6,173 Type IV PFPRV-4-A15-T4-25 2 PFPRV-4-A15-T4-25-9 3 PFPRV-4-A15-T4-25-0 3 150W 10,292 Type III PFPRV-4-A25-T3-25 2 PFPRV-4-A25-T3-25-9 3 PFPRV-4-A25-T3-25-0 3 250W 10,261 Type IV PFPRV-4-A25-T4-25 2 PFPRV-4-A25-T4-25-9 3 PFPRV-4-A25-T4-25-0 3 250W 15,203 Type III PFPRV-4-A40-T3-25 2 PFPRV-4-A40-T3-25-9 3 PFPRV-4-A40-T3-25-0 3 400W 15,157 Type IV PFPRV-4-A40-T4-25 2 PFPRV-4-A40-T4-25-9 3 PFPRV-4-A40-T4-25-0 3 400W 18,992 Type III PFPRV-4-A60-T4-25 2 PFPRV-4-A60-T4-25-9 3 PFPRV-4-A60-T4-25-0 3 450W 18,935 Type IV PFPRV-4-A60-T4-25 2 PFPRV-4-A60-T4-25-9 3 PFPRV-4-A60-T4-25-0 3 450W 6,192 Type III PFPRV-4-A15-T3-30 3 PFPRV-4-A15-T3-30-9 4 PFPRV-4-A15-T3-30-0 4 150W 6,173 Type IV PFPRV-4-A15-T4-30 3 PFPRV-4-A15-T4-30-9 4 PFPRV-4-A15-T4-30-0 4 150W 10,292 Type III PFPRV-4-A25-T3-30 3 PFPRV-4-A25-T3-30-9 4 PFPRV-4-A25-T3-30-0 4 250W 10,261 Type IV PFPRV-4-A25-T4-30 3 PFPRV-4-A25-T4-30-9 4 PFPRV-4-A25-T4-30-0 4 250W 15,203 Type III PFPRV-4-A40-T3-30 3 PFPRV-4-A40-T3-30-9 4 PFPRV-4-A40-T3-30-0 4 400W 15,157 Type IV PFPRV-4-A40-T4-30 3 PFPRV-4-A40-T4-30-9 4 PFPRV-4-A40-T4-30-0 4 400W 18,992 Type III PFPRV-4-A60-T4-30 3 PFPRV-4-A60-T4-30-9 4 PFPRV-4-A60-T4-30-0 4 450W 18,935 Type IV PFPRV-4-A60-T4-30 3 PFPRV-4-A60-T4-30-9 4 PFPRV-4-A60-T4-30-0 4 450W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for availability. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting Specifications and dimensions subject to change without notice. TD500029EN 2017-04-18 15:12:50

DESCRIPTION Lumark The patented Lumark Crosstour MAXX LED wall pack series of luminaries provides low-profile architectural style with super bright, energy-efficient LEDs. The rugged die-cast aluminum construction, back box with secure lock hinges, stainless steel hardware along with a sealed and gasketed optical compartment make Crosstour impervious to contaminants. The Crosstour MAXX wall luminaire is ideal for wall/ surface, inverted mount for facade/canopy illumination, perimeter and site lighting. Typical applications include pedestrian walkways, building entrances, multi-use facilities, industrial facilities, perimeter parking areas, storage facilities, institutions, schools and loading docks. Catalog # Project Comments Prepared by Type Date SPECIFICATION FEATURES Construction Low-profile LED design with rugged one-piece, die-cast aluminum back box and hinged removable door. Matching housing styles incorporate both a full cutoff and refractive lens design. Full cutoff and refractive lens models are available in 58W, 81W and 102W. Patent pending secure lock hinge feature allows for safe and easy tool-less electrical connections with the supplied push-in connectors. Back box includes four 1/2 NPT threaded conduit entry points. The back box is secured by four lag bolts (supplied by others). External fin design extracts heat from the fixture surface. One-piece silicone gasket seals door and back box. Not recommended for car wash applications. Optical Silicone sealed optical LED chamber incorporates a custom engineered reflector providing high-efficiency illumination. Full cutoff models integrate an impactresistant molded refractive prism optical lens assembly meeting requirements for Dark Sky compliance. Refractive lens models incorporate a molded lens DIMENSIONS assembly designed for maximum forward throw. Solid state LED Crosstour MAXX luminaries are thermally optimized with eight lumen packages in cool 5000K, neutral 4000K, or warm 3000K LED color temperature (CCT). Electrical LED driver is mounted to the die-cast aluminum housing for optimal heat sinking. LED thermal management system incorporates both conduction and natural convection to transfer heat rapidly away from the LED source. 58W, 81W and 102W models operate in -40 C to 40 C [-40 F to 104 F]. High ambient 50 C [122 F] models available in 58W and 81W models only. Crosstour MAXX luminaires maintain greater than 89% of initial light output after 72,000 hours of operation. Four half-inch NPT threaded conduit entry points allow for thru-branch wiring. Back box is an authorized electrical wiring compartment. Integral LED electronic driver incorporates surge protection. 120-277V 50/60Hz, 480V 60Hz, or 347V 60Hz electrical operation. 480V is compatible for use with 480V Wye systems only. Emergency Egress Optional integral cold weather battery emergency egress includes emergency operation test switch (available in 58W and 81W models only), an AC-ON indicator light and a premium extended rated sealed maintenance-free nickel-metal hydride battery pack. The separate emergency lighting LEDs are wired to provide redundant emergency lighting. Listed to UL Standard 924, Emergency Lighting. Area and Site Pole Mounting Optional extruded aluminum 6-1/2 arm features internal bolt guides for supplied twin support rods, allowing for easy positioning of the fixture during installation to pole. Supplied with round plate adapter plate. Optional tenon adapter fits 2-3/8 or 3-1/2 O.D. Tenon. Finish Crosstour MAXX is protected with a super TGIC carbon bronze or summit white polyester powder coat paint. Super TGIC powder coat paint finishes withstand extreme climate conditions while providing optimal color and gloss retention of the installed life. Warranty Five-year warranty. XTOR CROSSTOUR MAXX LED APPLICATIONS: WALL / SURFACE INVERTED SITE LIGHTING FULL CUTOFF DEEP BACK BOX REFRACTIVE LENS DEEP BACK BOX 11" [279mm] 11" [279mm] 8-3/4" [222mm] 6-1/4" [159mm] OPTIONAL POLE MOUNT ARM 7" [178mm] ARM DRILLING 8-3/4" [222mm] 6" [152mm] ESCUTCHEON PLATES 7" [178mm] CERTIFICATION DATA UL/cUL Wet Location Listed LM79 / LM80 Compliant ROHS Compliant NOM Compliant Models 3G Vibration Tested UL924 Listed (CBP Models) IP66 Rated DesignLights Consortium Qualified* 13-1/2" [343mm] 6-1/2" [165mm] 4-1/2" [114mm] TYPE "C" 2-5/8" [67mm] 3/4" [19mm] Dia. Hole 3" [77mm] 1-1/2" [39mm] (2) 9/16" [15mm] Dia. Holes 19-1/4" [489mm] 19-1/4" [489mm] TECHNICAL DATA 40 C Ambient Temperature External Supply Wiring 90 C Minimum EPA Effective Projected Area (Sq. Ft.): XTOR6B, XTOR8B, XTOR12B=0.54 With Pole Mount Arm=0.98 SHIPPING DATA: Approximate Net Weight: 12-15 lbs. [5.4-6.8 kgs.] *www.designlights.org TD514005EN 2017-06-05 13:46:15

POWER AND LUMENS BY FIXTURE MODEL XTOR CROSSTOUR MAXX LED 58W Series LED Information XTOR6B XTOR6BRL XTOR6B-W XTOR6BRL-W XTOR6B-Y XTOR6BRL-Y Delivered Lumens 6,129 6,225 6,038 6,133 5,611 5,826 B.U.G. Rating B1-U0-G1 B2-U4-G3 B1-U0-G1 B2-U4-G3 B1-U0-G1 B2-U4-G3 CCT (Kelvin) 5000K 5000K 4000K 4000K 3000K 3000K CRI (Color Rendering Index) 70 70 70 70 70 70 Power Consumption (Watts) 58W 58W 58W 58W 58W 58W 81W Series LED Information XTOR8B XTOR8BRL XTOR8B-W XTOR8BRL-W XTOR8B-Y XTOR8BRL-Y Delivered Lumens 8,502 8,635 8,373 8,504 7,748 8,079 B.U.G. Rating B2-U0-G1 B2-U4-G3 B2-U0-G1 B2-U4-G3 B2-U0-G1 B2-U4-G3 CCT (Kelvin) 5000K 5000K 4000K 4000K 3000K 3000K CRI (Color Rendering Index) 70 70 70 70 70 70 Power Consumption (Watts) 81W 81W 81W 81W 81W 81W 102W Series LED Information XTOR12B XTOR12BRL XTOR12B-W XTOR12BRL-W XTOR12B-Y XTOR12BRL-Y Delivered Lumens 12,728 13,458 12,539 13,258 11,861 12,595 B.U.G. Rating B2-U0-G1 B2-U4-G3 B2-U0-G1 B2-U4-G3 B2-U0-G1 B2-U4-G3 CCT (Kelvin) 5000K 5000K 4000K 4000K 3000K 3000K CRI (Color Rendering Index) 70 70 70 70 70 70 Power Consumption (Watts) 102W 102W 102W 102W 102W 102W EGRESS Information XTOR6B, XTOR8B and XTOR12B Full Cutoff CBP Egress LED XTOR6B, XTOR8B and XTOR12B Refractive Lens CBP Egress LED Delivered Lumens 509 468 B.U.G. Rating N.A. N.A. CCT (Kelvin) 4000K 4000K CRI (Color Rendering Index) 65 65 Power Consumption (Watts) 1.8W 1.8W LUMEN MAINTENANCE Ambient Temperature TM-21 Lumen Maintenance (72,000 Hours) Theoretical L70 (Hours) XTOR6B Model 25 C > 90% 246,000 40 C > 88% 217,000 50 C > 88% 201,000 XTOR8B Model 25 C > 89% 219,000 40 C > 87% 195,000 50 C > 86% 181,000 XTOR12B Model 25 C > 89% 222,000 40 C > 87% 198,000 Lumen Maintenance (Percent) 100 95 90 85 80 75 0 10 20 30 40 50 60 70 80 90 100 Hours (Thousands) 40 C 25 C CURRENT DRAW Voltage XTOR6B XTOR8B XTOR12B Model Series XTOR6B-CBP (Fixture/Battery) XTOR8B-CBP (Fixture/Battery) 120V 0.51 0.71 0.94 0.60/0.25 0.92/0.25 208V 0.25 0.39 0.52 - - - - 240V 0.25 0.35 0.45 - - - - 277V 0.22 0.31 0.39 0.36/0.21 0.50/0.21 347V 0.19 0.25 0.33 - - 480V 0.14 0.19 0.24 - - Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting Specifications and dimensions subject to change without notice. TD514005EN 2017-06-05 13:46:15

ORDERING INFORMATION XTOR CROSSTOUR MAXX LED Sample Number: XTOR6B-W-WT-PC1 Series 1 LED Kelvin Color Housing Color Options (Add as Suffix) Full Cutoff XTOR6B=58W XTOR8B=81W XTOR12B=102W Refractive Lens XTOR6BRL=58W XTOR8BRL=81W XTOR12BRL=102W [Blank]= Bright White (Standard) 5000K W=Neutral, 4000K Y=Warm, 3000K [Blank]=Carbon Bronze (Standard) WT=Summit White BK=Black BZ=Bronze AP=Grey GM=Graphite Metallic DP=Dark Platinum 2, 3, 4, 5 347V=347V 2, 3, 4, 5, 6 480V=480V PC1=Photocontrol 120V 7 PC2=Photocontrol 208-277V 7, 8 PMA=Pole Mount Arm (C Drilling) with Round Adapter 3, 9 2, 3, 10, 11 MS-L20=Motion Sensor for ON/OFF Operation MS/DIM-L20=Motion Sensor for Dimming Operation 2, 3, 11, 15, 17 CBP=Cold Weather Battery Pack HA=50ºC High Ambient 17 2, 3, 10, 11, 12, 13, 14 Accessories (Order Separately) WG-XTORMX=Crosstour MAXX Wire Guard PB120V=Field Installed 120V Photocontrol PB277V BUTTON PC=Field Installed 208-277V Photocontrol 8 VA1040-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1041-XX=2@180 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1042-XX=3@120 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1043-XX=4@90 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1044-XX=2@90 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1045-XX=3@90 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1046-XX=2@120 Tenon Adapter for 3-1/2 O.D. Tenon 16 VA1033-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1034-XX=2@180 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1035-XX=3@120 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1036-XX=4@90 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1037-XX=2@90 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1038-XX=3@90 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1039-XX=2@120 Tenon Adapter for 2-3/8" O.D. Tenon 16 EWP/XTORMX=Escutcheon Wall Plate, Carbon Bronze EWP/XTORMX-WT=Escutcheon Wall Plate, Summit White FSIR-100=Wireless Configuration Tool for Occupancy Sensor 14 NOTES: 1. DesignLights Consortium Qualified and classified for both DLC Standard and DLC Premium, refer to www.designlights.org for details. 2. Not available with HA option. 3. Deep back box is standard for 347V, 480V, CBP, PMA, MS-L20 and MS/DIM-L20. 4. Not available with CBP option. 5. Thru-branch wiring not available with HA option or with 347V. 6. Only for use with 480V Wye systems. Per NEC, not for use with ungrounded systems, impedance grounded systems or corner grounded systems (commonly known as Three Phase Three Wire Delta, Three Phase High Leg Delta and Three Phase Corner Grounded Delta systems). 7. Not available with MS-L20 and MS/DIM-L20 options. 8. Use PC2 with 347V or 480V option for photocontrol. Factory wired to 208-277V lead. 9. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to our white paper WP513001EN for additional support information. 10. For use in downlight orientation only. Optimal coverage at mounting heights of 9'-20'. 11. 120V thru 277V only. 12. Factory set to 50% power reduction after 15-minutes of inactivity. Dimming driver included. 13. Includes integral photo sensor. 14. The FSIR-100 configuration tool is required to adjust parameters including high and low modes, sensitivity, time delay, cutoff, and more. Consult your lighting representative at Eaton for more information. 15. Operating temperatures -20 C to 25 C. 16. Replace XX with housing color. 17. Not available in XTOR12B or XTOR12BRL models. STOCK ORDERING INFORMATION 58W Series 81W Series 102W Series Full Cutoff XTOR6B=58W, 5000K, Carbon Bronze XTOR8B=81W, 5000K, Carbon Bronze XTOR12B=102W, 5000K, Carbon Bronze XTOR6B-PC1=58W, 5000K, 120V PC, Carbon Bronze XTOR8B-PC1=81W, 5000K, 120V PC, Carbon Bronze XTOR12B-PC1=102W, 5000K, 120V PC, Carbon Bronze XTOR6B-WT= 58W, 5000K, Summit White XTOR8B-WT=81W, 5000K, Summit White XTOR12B-WT=102W, 5000K, Summit White XTOR6B-W=58W, 4000K, Carbon Bronze XTOR8B-PC2=81W, 5000K, 208-277V PC, Carbon Bronze XTOR12B-PC2=102W, 5000K, 208-277V PC, Carbon Bronze XTOR6B-PMA= 58W, 5000K, Pole Mount Arm, Carbon Bronze XTOR6B-W-PMA= 58W, 4000K, Pole Mount Arm, Carbon Bronze XTOR8B-PMA= 81W, 5000K, Pole Mount Arm, Carbon Bronze XTOR8B-W= 81W, 4000K, Carbon Bronze XTOR12B-PMA= 102W, 5000K, Pole Mount Arm, Carbon Bronze XTOR12B-W=102W, 4000K, Carbon Bronze XTOR6B-PC2= 58W, 5000K, 208-277V PC, Carbon Bronze XTOR8B-W-PC1= 81W, 4000K, 120V PC, Carbon Bronze XTOR12B-W-PC1=102W, 4000K, 120V PC, Carbon Bronze XTOR6B-W-PC2=58W, 4000K, 208-277V PC, Carbon Bronze XTOR6B-W-PC1=58W, 4000K, 120V PC, Carbon Bronze XTOR8B-W-PC2= 81W, 4000K, 208-277V PC, Carbon Bronze XTOR8B-W-PMA= 81W,4000K, Pole Mount Arm, Carbon Bronze XTOR12B-W-PC2= 102W, 4000K, 208-277V PC, Carbon Bronze XTOR12B-W-PMA= 102W,4000K, Pole Mount Arm, Carbon Bronze Refractive Lens XTOR6BRL=58W, 5000K, Refractive Lens, Carbon Bronze XTOR8BRL= 81W, 5000K, Refractive Lens, Carbon Bronze XTOR12BRL=102W, 5000K, Refractive Lens, Carbon Bronze XTOR6BRL-PC1= 58W, 5000K, Refractive Lens, 120V PC, Carbon Bronze XTOR6BRL-WT= 58W, 5000K, Refractive Lens, Summit White XTOR6BRL-W= 58W, 4000K, Refractive Lens, Carbon Bronze XTOR8BRL-PC1= 81W, 5000K, Refractive Lens, 120V PC, Carbon Bronze XTOR8BRL-WT= 81W, 5000K, Refractive Lens, Summit White XTOR8BRL-PC2= 81W, 5000K, Refractive Lens, 208-277V PC, Carbon Bronze XTOR12BRL-PC1= 102W, 5000K, Refractive Lens, 120V PC, Carbon Bronze XTOR2BRL-WT= 102W, 5000K, Refractive Lens, Summit White XTOR12BRL-PC2= 102W, 5000K, Refractive Lens, 208-277V PC, Carbon Bronze XTOR6BRL-PMA= 58W, 5000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR6BRL-W-PMA= 58W,4000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR6BRL-PC2= 58W, 5000K, Refractive Lens, 208-277V PC, Carbon Bronze XTOR6BRL-W-PC2= 58W, 4000K, Refractive Lens, 208-277V PC, Carbon Bronze XTOR6BRL-W-PC1= 58W, 4000K, Refractive Lens, 120V PC, Carbon Bronze XTOR8BRL-PMA= 81W, 5000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR8BRL-W= 81W, 4000K, Refractive Lens, Carbon Bronze XTOR8BRL-W-PC1= 81W, 4000K, Refractive Lens, 120V PC, Carbon Bronze XTOR8BRL-W-PC2= 81W, 4000K, Refractive Lens, 208-277V PC, Carbon Bronze XTOR8BRL-W-PMA= 81W,4000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR12BRL-PMA= 102W, 5000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR12BRL-W= 102W, 4000K, Refractive Lens, Carbon Bronze XTOR12BRL-W-PC1= 102W, 4000K, Refractive Lens, 120V PC, Carbon Bronze XTOR12BRL-W-PC2= 102W, 4000K, Refractive Lens, 208-277V PC, Carbon Bronze XTOR12BRL-W-PMA= 102W,4000K, Refractive Lens, Pole Mount Arm, Carbon Bronze Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting Specifications and dimensions subject to change without notice. TD514005EN 2017-06-05 13:46:15

American Revolution Full Cutoff LED Series 247CL P R O D U C T O V E R V I E W SERIES 247CL Applications: Streetscapes Walkways Pathways Parks Features: Die-cast aluminum housing and hood for long-life performance Die-cast trigger latch (TL) and captive thumb screws option available for easy access to internal components Optical assembly designed for maximum performance, available in Type II, Type III and Type V Hinged hood and captive thumb screws provision afford quick, easy access to electrical and optical area for servicing Slipfitter with three set screws allows secure installation to pole sizes 2-3/8" or 3" O.D. Surge protection device (standard) exceeds ANSI C62.41 Category C1 criteria (surge tested at 10kV/5kA) Complies with ANSI: C136.2, C136.10, C136.15 CSA listed and suitable for up to 30 C ambient Rated L70, LED life greater than 100,000 hours at 25 C Replaces up to 150W HPS light source incumbant models LED electronic 0V-10V dimmable driver DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/qpl to confirm which versions are qualified. DIMENSIONS 16.8 (427) 3.73 Cupola height P3 without ROAM Shown in line diagram 23.6 (600) 3.93 5.03 Cupola height P5/P7 without ROAM Cupola height P5/P7 with ROAM Effective Projected Area (EPA) The EPA for the American Revolution Series 247CL is 1.0 sq. ft. P5 or P7 option total height is 24.9 (633). Approx. Wt. = 36 lbs. All dimensions are inches (millimeters) unless otherwise noted. Note: Specifications subject to change without notice. American Revolution Full Cutoff Series 247CL LED

O R D E R I N G I N F O R M A T I O N American Revolution Full Cutoff LED Series 247CL Example: 247CL 20LEDE70 MVOLT 4K R3 Series Performance Package Voltage Color Temperature (CCT) 247CL American Revolution Full Cutoff LED 20LEDE10 20 Chips, 1050 ma Driver, 73 input watts MVOLT Multi-volt, 120-277V 3K 3000K 20LEDE70 20 Chips, 700 ma Driver, 46 input watts 347 347V 4K 4000K 10LEDE10 10 Chips, 1050 ma Driver, 39 input watts 480 480V 5K 5000K 10LEDE70 10 Chips, 700 ma Driver, 26 input watts 10LEDE53 10 Chips, 525 ma Driver, 19 input watts 10LEDE35 10 Chips, 350 ma Driver, 14 input watts Distribution Options R2 R3 R5 Type II Type III Type V Paint 1 (blank) GY DDB WH BZ Black (standard) Gray Dark Bronze White Bronze Photocontrol (blank) 3 pin NEMA Photocontrol Receptacle (standard) NR 2 No Photocontrol Receptacle P5 3 5 pin NEMA Photocontrol Receptacle (dimmable driver included) P7 3 7 pin NEMA Photocontrol Receptacle (dimmable driver included) PCLL 4,5 Solid State Long Life Photocontrol PCSS 4,5,6 Not CSA Listed Solid State Long Life Photocontrol (120-277V) 3.73 3.93 P3 Receptacle Selection Non-ROAM Control Blank Cupola size based on type of control and receptacle P5/P7 Receptacle Selection Non-ROAM Control P5 or P7 5.03 P5/P7 Receptacle Selection ROAM Control RNC is required with: P5 + RCC or P7 + RCC Miscellaneous SS Stainless steel hardware NL NEMA Label XL Not CSA Listed TL Tool-less Entry LDR 7 Ladder Rest SH Shorting Cap SHX 6 Not CSA Listed Shorting Cap HSS House Side Shield CR Enhanced Corrosion Resistant Finish RCC 8 ROAM Dimming Node Cupola Cover Accessories RNC57 3 ROAM Dimming Node Cupola Cover Notes: 1. Other colors available, please contact factory 2. PC and SH not available with NR option 3. Taller cupola cover (RCC) is required when used with ROAM or other similar wireless monitoring control systems 4. Standard failure mode= Fail On 5. Photocontrols supplied with ANSI Standard Turn-On levels 6. XL option is required 7. Ships with unit, field installed 8. Required when using ROAM or other similar wireless monitoring control systems AEL Headquarters, 3825 Columbus Road, Granville, OH 43023 www.americanelectriclighting.com 2017 Acuity Brands Lighting, Inc. All Rights Reserved. 07/28/17 Warranty Five-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/customerresources/terms_and_conditions.aspx Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Please contact your sales representative for the latest product information.

O P E R A T I N G C H A R A C T E R I S T I C S DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/qpl to confirm which versions are qualified. TOTAL LUMENS LED Quantity, ma, CCT Input Watts R2 LPW R3 LPW R5 LPW 20LEDE10 3K 73 6,275 86 6,352 87 6,800 93 20LEDE10 4K 73 6,739 92 6,821 93 7,303 100 20LEDE10 5K 73 6,781 93 6,864 94 7,348 101 20LEDE70 3K 46 4,687 102 4,744 103 5,080 110 20LEDE70 4K 46 5,033 109 5,094 111 5,454 119 20LEDE70 5K 46 5,065 110 5,127 111 5,489 119 10LEDE10 3K 39 3,354 86 3,395 87 3,635 93 10LEDE10 4K 39 3,602 92 3,646 93 3,902 100 10LEDE10 5K 39 3,623 93 3,668 94 3,927 101 10LEDE70 3K 26 2,415 93 2,445 94 2,617 101 10LEDE70 4K 26 2,594 100 2,625 101 2,810 108 10LEDE70 5K 26 2,609 100 2,641 102 2,829 109 10LEDE53 3K 19 1,899 100 1,922 101 2,058 108 10LEDE53 4K 19 2,039 107 2,064 109 2,210 116 10LEDE53 5K 19 2,051 108 2,077 109 2,224 117 10LEDE35 3K 14 1,313 94 1,330 95 1,424 102 10LEDE35 4K 14 1,411 101 1,428 102 1,528 109 10LEDE35 5K 14 1,418 101 1,436 103 1,537 110 American Revolution Full Cutoff LED Series 247CL DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/qpl to confirm which versions are qualified. TOTAL LUMENS w/hss (HOUSE SIDE SHIELD) LED Quantity, ma, CCT Input Watts R2 LPW R3 LPW R5 LPW 20LEDE10 3K 73 5,300 73 5,341 73 4,814 66 20LEDE10 4K 73 5,690 78 5,736 79 5,169 71 20LEDE10 5K 73 5,725 78 5,772 79 5,202 71 20LEDE70 3K 46 3,957 86 3,989 87 3,595 78 20LEDE70 4K 46 4,250 92 4,284 93 3,862 84 20LEDE70 5K 46 4,277 93 4,311 94 3,885 84 10LEDE10 3K 39 2,832 73 2,855 73 2,573 66 10LEDE10 4K 39 3,042 78 3,065 79 2,763 71 10LEDE10 5K 39 3,060 78 3,085 79 2,780 71 10LEDE70 3K 26 2,039 78 2,056 79 1,853 71 10LEDE70 4K 26 2,190 84 2,207 85 1,990 77 10LEDE70 5K 26 2,204 85 2,222 85 2,002 77 10LEDE53 3K 19 1,603 84 1,616 85 1,456 77 10LEDE53 4K 19 1,723 91 1,735 91 1,564 82 10LEDE53 5K 19 1,732 91 1,746 92 1,574 83 10LEDE35 3K 14 1,109 79 1,118 80 1,008 72 10LEDE35 4K 14 1,191 85 1,200 86 1,081 77 10LEDE35 5K 14 1,198 86 1,208 86 1,089 78 AEL Headquarters, 3825 Columbus Road, Granville, OH 43023 www.americanelectriclighting.com 2017 Acuity Brands Lighting, Inc. All Rights Reserved. 07/28/17 Warranty Five-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/customerresources/terms_and_conditions.aspx Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Please contact your sales representative for the latest product information.

-- _

1 American Revolution Full Cutoff LED Series 247CL P R O D U C T O V E R V I E W SERIES 247CL Applications: Streetscapes Walkways Pathways Parks Features: Die-cast aluminum housing and hood for long-life performance Die-cast trigger latch (TL) and captive thumb screws option available for easy access to internal components Optical assembly designed for maximum performance, available in Type II, Type III and Type V Hinged hood and captive thumb screws provision afford quick, easy access to electrical and optical area for servicing Slipfitter with three set screws allows secure installation to pole sizes 2-3/8" or 3" O.D. Surge protection device (standard) exceeds ANSI C62.41 Category C1 criteria (surge tested at 10kV/5kA) Complies with ANSI: C136.2, C136.10, C136.15 CSA listed and suitable for up to 30 C ambient Rated L70, LED life greater than 100,000 hours at 25 C Replaces up to 150W HPS light source incumbant models LED electronic 0V-10V dimmable driver DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/qpl to confirm which versions are qualified. DIMENSIONS 16.8 (427) 3.73 Cupola height P3 without ROAM Shown in line diagram 23.6 (600) 3.93 5.03 Cupola height P5/P7 without ROAM Cupola height P5/P7 with ROAM Effective Projected Area (EPA) The EPA for the American Revolution Series 247CL is 1.0 sq. ft. P5 or P7 option total height is 24.9 (633). Approx. Wt. = 36 lbs. All dimensions are inches (millimeters) unless otherwise noted. Note: Specifications subject to change without notice. American Revolution Full Cutoff Series 247CL LED

-- _

2 American Revolution Full Cutoff LED Series 247CL P R O D U C T O V E R V I E W SERIES 247CL Applications: Streetscapes Walkways Pathways Parks Features: Die-cast aluminum housing and hood for long-life performance Die-cast trigger latch (TL) and captive thumb screws option available for easy access to internal components Optical assembly designed for maximum performance, available in Type II, Type III and Type V Hinged hood and captive thumb screws provision afford quick, easy access to electrical and optical area for servicing Slipfitter with three set screws allows secure installation to pole sizes 2-3/8" or 3" O.D. Surge protection device (standard) exceeds ANSI C62.41 Category C1 criteria (surge tested at 10kV/5kA) Complies with ANSI: C136.2, C136.10, C136.15 CSA listed and suitable for up to 30 C ambient Rated L70, LED life greater than 100,000 hours at 25 C Replaces up to 150W HPS light source incumbant models LED electronic 0V-10V dimmable driver DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/qpl to confirm which versions are qualified. DIMENSIONS 16.8 (427) 3.73 Cupola height P3 without ROAM Shown in line diagram 23.6 (600) 3.93 5.03 Cupola height P5/P7 without ROAM Cupola height P5/P7 with ROAM Effective Projected Area (EPA) The EPA for the American Revolution Series 247CL is 1.0 sq. ft. P5 or P7 option total height is 24.9 (633). Approx. Wt. = 36 lbs. All dimensions are inches (millimeters) unless otherwise noted. Note: Specifications subject to change without notice. American Revolution Full Cutoff Series 247CL LED

-- _

LIGHT BRACKETS HERITAGE SERIES DECORATIVE POLES A L U M I N U M 2-7/8 O.D. bracket and pole tenons - additional sizes available. SPECIFICATIONS HERITAGE series light brackets are constructed out of seamless aluminum tubing. These products include: factory installed rubber grommets for wireways, press-on end caps and hub/set screw shaft mounting connection for easy orientation adjustment in the field. 2 - TENON 180º VERTICAL MOUNT 3 - TENON 180º VERTICAL MOUNT 18" 18" Model Number: 2VTH180 EPA of Bracket: 1.15 Typical Wt. Load Per Tenon: 50 Lbs. Max. EPA Load Per Tenon: 6.0 24" 24" Model Number: 3VTH180 EPA of Bracket: 1.64 Typical Wt. Load Per Tenon: 50 Lbs. Max. EPA Load Per Tenon: 6.0 3 - TENON 120º VERTICAL MOUNT 4 - TENON 90º VERTICAL MOUNT 18" 31-1/4" Model Number: 3VTH120 EPA of Bracket: 1.34 Typical Wt. Load Per Tenon: 50 Lbs. Max. EPA Load Per Tenon: 6.0 18" 25-1/2" Model Number: 4VTH90 EPA of Bracket: 1.89 Typical Wt. Load Per Tenon: 50 Lbs. Max. EPA Load Per Tenon: 6.0 Tenon loading has been calculated for weights based on a 100 M.P.H constant wind with a 1.3 gust factor. When loading requirements exceed these limits contact your Valmont representative or Valmont Industries. Variations from sizes listed above are available upon inquiry at the factory. CATALOG LOGIC NUMBER OF ARMS NUMBER OF ARMS TYPE OF ARMS 2 = Double VT= = 3 = Triple Vertical Tenon 4 = Quad TYPE OF SERIES H = Heritage TYPE OF ARMS VT TYPE OF SERIES H ORIENTATION OF ARMS FINISHES ORIENTATION OF ARMS STANDARD FINISHES POLYESTER POWDER 90 = 4 @ 90 º DBL = Black DMB = Med Bronze DSS = Sandstone 120 = 3 @ 120 º 180 = 2 @ 180 º or 3 @ 180 º DBR = Bright Red DCG = Charcoal Gray DDB = Dark Bronze DNA = Natural Alum DSB = Steel Blue DTG = Dark Green DWH = White OPTIONS OPTIONS Different Size Slipfitters Consult Factory Valmont Industries, Inc. ~ 20805 Eaton Avenue ~ Farmington, Minnesota 55024-0228 (800)899-7577 ~ www.valmont.com 3-HT-3 SPC7082 05/05 - This spec supercedes all previous publications.

D-Series LED Bollard Catalog Number Notes Type Hit the Tab key or mouse over the page to see all interactive elements. Introduction Specifications Diameter: 8 Round (20.3 cm) Height: 42 (106.7 cm) Weight (max): 27 lbs (12.25 kg) H The D-Series LED Bollard is a stylish, energysaving, long-life solution designed to perform the way a bollard should with zero uplight. An optical leap forward, this full cut-off luminaire will meet the most stringent of lighting codes. The D-Series LED Bollard s rugged construction, durable finish and long-lasting LEDs will provide years of maintenance-free service. D Ordering Information EXAMPLE: DSXB LED 16C 700 40K SYM MVOLT DDBXD DSXB LED Series LEDs Drive current Color temperature Distribution Voltage Control options Other options Finish (required) DSXB LED Asymmetric 350 350 ma 12C 12 LEDs 1 450 450 ma 3,4 530 530 ma Symmetric 700 700 ma 16C 16 LEDs 2 30K 40K 50K AMBPC AMBLW 3000 K 4000 K 5000 K Amber phosphor converted Amber limited wavelength 3,4 ASY Asymmetric 1 MVOLT 5 SYM Symmetric 2 120 5 208 5 240 5 277 5 347 4 Shipped installed PE Photoelectric cell, button type DMG 0-10V dimming driver (no controls) ELCW Emergency battery backup 6 Shipped installed SF Single fuse (120, 277, 347V) 4,7 DF Double fuse (208, 240V) 4,7 H24 24 overall height H30 30 overall height H36 36 overall height FG Ground-fault festoon outlet L/AB Without anchor bolts L/AB4 4-bolt retrofit base without anchor bolts 8 DWHXD White DNAXD Natural aluminum DDBXD Dark bronze DBLXD Black DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white Accessories Ordered and shipped separately. MRAB U Anchor bolts for DSXB 8 NOTES 1 Only available in the 12C, ASY version. 2 Only available in the 16C, SYM version. 3 Only available with 450 AMBLW version. 4 Not available with ELCW. 5 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options), or photocontrol (PE option). 6 Not available with 347V. Not available with fusing. Not available with 450 AMBLW. 7 Single fuse (SF) requires 120, 277, or 347 voltage option. Double fuse (DF) requires 208 or 240 voltage option. 8 MRAB U not available with L/AB4 option. One Lithonia Way Conyers, Georgia 30012 Phone: 800.279.8041 www.lithonia.com 2012-2017 Acuity Brands Lighting, Inc. All rights reserved.