Concrete Saws Professional

Concrete Saws Professional MK-4000 Series 1315 Storm Parkway, Torrance, CA 90501, USA Tel: 1.800.421.5830, 310.539.5221 Fax: 310.539.5158 mkdiamond.com customerservice@mkdiamond.com

MK-4000 Series SELF-PROPELLED CONCRETE SAWS The MK-4000 Professional Series is designed for operator comfort, safety and efficiency. Environmentally friendly with low emissions and meets EPA and CARB requirements. Saw is designed for left or right mounting of blade and blade guard. Travel speed; 0-220 FPM forward, 0-100 FPM reverse. MADE IN USA Standard Features: Control Panel Instruments are positioned for better visibility, quick access and ease of operation. Control set provides proportional blade raising/lowering and travel speed with one hand operation. Easy Access Removable rear and side panels provide easy accessibility for service and preventive maintenance. Engine Power The MK-4000 Professional Series is available with a Kubota 44 Hp diesel engine or Kubota 57Hp gas engine. The saws feature a three stage dual element radial seal air filter that protects the engine and delivers long filter life. www.kubotaengine.com The 44Hp Kubota V1505-T-E3B is a 4 cylinder in-line, diesel fueled, turbo-charged, liquid-cooled engine. It is fuel efficient, altitude compensating, has low emissions and meets all EPA and CARB requirements. The engine is 1498cc in displacement and features Kubota s Three Vortec Combustion system, which produces an ideal air/fuel mixture that provides increased combustion efficiency and cleaner exhaust. The 57Hp Kubota WG1605-G-E3 is a 4 cylinder in-line, gas fueled, naturally aspirated, liquid-cooled engine. It is fuel efficient, altitude compensating, has low emissions and meets EPA and CARB requirements. The engine is 1537cc in displacement. This engine offers very low vibration and is exceptionally quiet. Water Delivery Blade guard uses"ride on the blade" water tubes for superior water delivery and blade cooling. Balanced Design Superb balance that minimizes user fatigue while increasing maneuverability and providing straight line tracking during cutting. Blade Guard Quick, release, auto-latching bayonet mount blade guard. Optional: Meco Spade available to allow for use of old style Meco guards. Blade Shaft Removable blade shaft stub for easy maintenance. Totally enclosed and sealed blade shaft with continuous oil bath lubrication system. www.mkdiamond.com

Standard Features: Maneuverability Designed for both front and rear pivoting allowing for ease of movement and control. Three-position adjustable solid steel handlebars are ergonomically designed; they adjust to comfortably accommodate the operator. Lifting Bail Built-in lifting bail for easy maneuverability. Axle Axle is designed for smooth transition in and out of cuts. Accurate Tracking Rigid frame pointer with high visibility guide wheel for accurate tracking. Differential Drive System Provides positive drive to both rear wheels for maximum traction when cutting on slippery surfaces and free/engage controls to allow the saw to be pushed manually. Transmission Eaton model 6 hydrostatic transmission coupled to an MK differentiating trans-axle provides continuous variable forward/ reverse travel and cutting motion. 3-speed Series Features: The 3-speed blade shaft gearbox allows for multiple blade diameters without belt/pulley changes reducing labor time. Located at the front of the saw for easy access, the gearbox is used to change output speed of the blade shaft. Blade capacity available from 12" to 36". The 3-Speed Series offers the widest range of blade sizes, without pulley changes, of any saw available on the market. Gear Box Models MK-4020, MK-4026, MK-4030, MK-4036 Selected Gear Blade Diameter/Blade Guard RPM High 12" - 16" 3000 Medium 18" - 24" 2000 Low 26" - 36" 1300 Gearbox is watercooled for longevity and long maintenance intervals. Gear Shift Gearbox shift lever locks in place. Belts One 7 rib powerband from engine to gearbox. 1.800.421.5830 TO ORDER

single Speed MK-4020KB MK-4026KB MK-4030KB MK-4036KB Part # 167420-20 167420-26 167420-30 167420-36 Blade Guard Capacity 20" (508mm) 26" (660mm) 30" (762mm) 36" (914mm) Max. Depth of Cut 7-1/2" (191mm) 10-1/2" (267mm) 12-1/2" (318mm) 15" (381mm) Blade Flange Diameter 4" (102mm) 5" (127mm) 5" (127mm) 6" (152mm) Blade Shaft RPM 2,200 1,900 1,650 1,350 Arbor Size 1" (25mm) 1" (25mm) 1" (25mm) 1" (25mm) 3-speed MK-4020KBG MK-4026KBG MK-4030KBG MK-4036KBG Part # 167420-20G 167420-26G 167420-30G 167420-36G Blade Guard Capacity 20" (508mm) 26" (660mm) 30" (762mm) 36" (914mm) Max. Depth of Cut 7-1/2" (191mm) 10-1/2" (267mm) 12-1/2" (318mm) 15" (381mm) Blade Flange Diameter 4" (102mm) 5" (127mm) 5" (127mm) 6" (152mm) Blade Shaft RPM 1300/2000/3000 1300/2000/3000 1300/2000/3000 1300/2000/3000 Arbor Size with 3/8" Drive Pin 1" (25mm) 1" (25mm) 1" (25mm) 1" (25mm) TECHNICAL SPECIFICATIONS Blade Shaft Diameter Blade Shaft Bearings Blade Shaft Drive Blade Guard Attachment Blade Control Axle - Front Axle - Rear Wheels - Front Wheels - Rear Handle Bars/Adjustment Length Transmission Rear End/Differential Control Speed Chassis Power Source Engine Type Specifications Maximum Horsepower* Displacement Bore Stroke Cylinders Fuel Capacity Oil Capacity Air Filter Starter Engine Cooling Specifications kubota (Diesel): 1-5/8" (41mm) Oil Bath One Seven Rib Powerband Quick Detach Bayonet Electro-Hydraulic 1" (25mm) 1" (25mm) 6" x 2-1/2" x 1" (152 x 64 x 25mm) 10" x 3" x 1" (254 x 77 x 25mm) 32-1/2" (826mm) Eaton Hydrostatic Differential Forward/Reverse Control, Engage/Disengaged Controls and Differential Lock 0-222 FPM (Forward) 0-100 FPM (Reverse) Heavy Duty jig-welded box frame Diesel Turbo Charged Kubota V1505-T-E3B-KEA-1 44Hp (32.8kw) 91.4 cu in. (1,4498.1cc) 3.07" (78mm) 3.09" (78.4mm) 4 Cylinder 6 Gal (23 liter) 7.08 Qt. (6.7 liter) Three Stage Dual Element Radial Seal Electric Liquid *Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer s owners manual and website for specific information regarding the engine power rating. www.mkdiamond.com

Specifications kubota (Gas): single Speed MK-4020KG MK-4026KG MK-4030KG MK-4036KG Part # 172192-20 172192-26 172192-30 172192-36 Blade Guard Capacity 20" (508mm) 26" (660mm) 30" (762mm) 36" (914mm) Max. Depth of Cut 7-1/2" (191mm) 10-1/2" (267mm) 12-1/2" (318mm) 15" (381mm) Blade Flange Diameter 4" (102mm) 5" (127mm) 5" (127mm) 6" (152mm) Blade Shaft RPM 2,200 1,900 1,650 1,350 Arbor Size 1" (25mm) 1" (25mm) 1" (25mm) 1" (25mm) 3-speed MK-4020KGG MK-4026KGG MK-4030KGG MK-4036KGG Part # 172192-20G 172192-26G 172192-30G 172192-36G Blade Guard Capacity 20" (508mm) 26" (660mm) 30" (762mm) 36" (914mm) Max. Depth of Cut 7-1/2" (191mm) 10-1/2" (267mm) 12-1/2" (318mm) 15" (381mm) Blade Flange Diameter 4" (102mm) 5" (127mm) 5" (127mm) 6" (152mm) Blade Shaft RPM 1300/2000/3000 1300/2000/3000 1300/2000/3000 1300/2000/3000 Arbor Size 1" (25mm) 1" (25mm) 1" (25mm) 1" (25mm) TECHNICAL SPECIFICATIONS Blade Shaft Diameter 1-5/8" (41mm) Blade Shaft Bearings Oil Bath Blade Shaft Drive One Seven Rib Powerband Blade Guard Attachment Quick Detach Bayonet Blade Control Electro-Hydraulic Axle - Front 1" (25mm) Axle - Rear 1" (25mm) Wheels - Front 6" x 2-1/2" x 1" (254 x 64 x 25mm) Wheels - Rear 10" x 3" x 1" (254 x 77 x 25mm) Handle Bars/Adjustment Length 32-1/2" (826mm) Transmission Eaton Hydrostatic Rear End/Differential Differential Control Forward/Reverse Control, Engage/Disengaged Controls and Differential Lock Speed 0-222 FPM (Forward) 0-100 FPM (Reverse) Chassis Heavy Duty jig-welded box frame Power Source Gasoline Engine Type Kubota Electronic Fuel Injection Specifications WG10605-G-E3 Maximum Horsepower* 57 Hp (42.5 kw) Displacement 93.79 cu in. (1.537 liter) Bore 3.11" (79mm) Stroke 3.09" (78.4mm) Cylinders 4 In-Line Fuel Capacity 6 Gal (23 liter) Oil Capacity 6.4 Qt. (6 liter) Air Filter Starter Engine Cooling Three Stage Dual Element Radial Seal Electric Liquid *Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer s owners manual and website for specific information regarding the engine power rating. 1.800.421.5830 TO ORDER

electric Made in the USA Control Panel Front & Rear Pivot Baldor Motor MK-4000 Pro Electric Series Self-Propelled Concrete Saws The MK-4000 Electric Saw provides a solution for those environments and situations where electric power is the right choice, whether for indoor use or simply operator preference. The saw utilizes a three-phase, 30 Hp, Baldor 460V electric motor. The saw features the same hydraulic raise/lower system, self-propelled transmission and control set as other MK-4000s. The saw has an on-board battery to provide 12VDC power for raise/lower function when the saw is not plugged in, and has a transformer/battery charger to recharge the system automatically anytime the saw is connected to power. The saw can also be plugged into 120VAC to recharge or maintain the battery when the saw is not in use. An ammeter is provided to help monitor load when cutting. One-year limited warranty. Switch IP 65 IEC across the line starter Travel Speed 0-220 FPM Forward, 0-100 FPM Reverse L x W x H (inches) L x W x H (mm) 64" x 35" x 47" 1,626 x 889 x 1,194mm Motor Baldor (Electric) Weight 1250 lbs. (567kg) Model MK-4020B MK-4026B MK-4030B MK-4036B Blade Capacity 20" (508mm) 26" (660mm) 30" (762mm) 36" (916mm) Power 30 Hp 460V 3 Ph 30 Hp 460V 3 Ph 30 Hp 460V 3 Ph 30 Hp 460V 3 Ph Blade RPM 2,240 1,760 1,760 1,400 Depth of Cut 7-1/2" (191mm) 10-1/2" (267mm) 12-1/2" (318mm) 15" (381mm) Part# 167439-20 167439-26 167439-30 167439-36 Blade not included www.mkdiamond.com

MK-Pro Series MK-Pro Professional series Professional Grade Diamond grade diamond Blades blades The MK-Pro Series is designed and engineered for use on high horsepower, flat saws. This Professional Series is for contractors who insist on optimal performance. Cured Concrete* Green Concrete** Asphalt/Concrete*** Asphalt**** hard aggregate /non-abrasive medium-hard aggregate soft aggregate /abrasive sand hard aggregate asphalt overlay soft aggregate MK-7501 MK-7502 MK-7503 MK-7601W MK-7625 MK-7710W Horsepower Range 35-72 35-72 35-72 35-72 35-72 35-72 Rim Height 14mm 14mm 14mm 12mm 12mm 12mm Diameter Width Arbor 12 (305mm).125 1 153968 152240 152154 153187 153971 153562 12 (305mm).145 1 169784 169785 169786 154096 154131 169867 12 (305mm).187 1 169787 169788 169789 154097 154132 169868 14 (356mm).125 1 152603 151504 153972 153867 153356 152602 14 (356mm).145 1 169790 169791 169792 154098 169793 153586 14 (356mm).155 1 169794 154083 154092 169812 169795 169869 14 (356mm).187 1 169796 169797 169798 154099 154135 169870 14 (356mm).250 1 169799 169800 169801 152774 169802 169871 16 (406mm).125 1 152534 153974 169805 169817 153978 153979 18 (457mm).125 1 152738 152237 153980 153981 153289 153222 18 (457mm).155 1 154670 154085 154094 154100 152418 155131 18 (457mm).187 1 169803 154086 169804 153593 153300 20 (508mm).125 1 153190 153841 153984 153988 153989 20 (508mm).155 1 169806 154087 169807 169808 169872 24 (610mm).145 1 169809 169810 169811 169813 153995 24 (610mm).155 1 153305 152372 153990 169814 169873 24 (610mm).187 1 161124 169815 169816 169818 169874 26 (660mm).155 1 154079 169819 169820 169822 169875 26 (660mm).165 1 169823 153299 154095 169825 169876 26 (660mm).187 1 158491 169826 169827 169829 169877 30 (762mm).165 1 169830 154089 169831 169833 169878 30 (762mm).187 1 154080 169834 169835 153374 157827 30 (762mm).250 1 169836 169837 169838 169840 169879 36 (914mm).187 1 161125 169841 169842 153750 169880 36 (914mm).210 1 169844 169845 169846 153563 169847 36 (914mm).250 1 169848 169849 169850 169852 169851 42 (1067mm).187 1 169853 169854 169855 169857 169856 42 (1067mm).220 1 169858 169859 169860 169862 169861 Wide Notch Core Rim Height 12mm 12mm 12mm 10mm 10mm 10mm 26 (660mm).165 1 169881 169882 169883 169885 169886 26 (660mm).187 1 169887 169888 169889 169891 169892 30 (762mm).165 1 169893 169894 169895 169897 169898 30 (762mm).187 1 169899 169900 169901 169903 169904 30 (762mm).250 1 169905 169906 169907 169909 169910 36 (914mm).187 1 169911 169912 169913 169915 169916 36 (914mm).250 1 169917 169918 169919 169921 169922 42 (1067mm).187 1 169923 169924 169925 169927 169928 42 (1067mm).220 1 169929 169930 169931 169933 169934 MK-7501-30 MK-7502-40 Joint Widening Blades - Cured Concrete 12 (305mm).187 1 169884 169920 12 (305mm).220 1 169890 169926 12 (305mm).250 1 169896 169932 14 (356mm).187 1 169902 169940 14 (356mm).220 1 169908 169941 14 (356mm).250 1 169914 169942 Joint widening blades do not have undercut protection Joint Widening Spacer Size Segment width (inches) Part # 8 (203mm).032 1.125-.187 169943 8 (203mm).064 1.220-.250 169944 *Cured Concrete Blades **Green Concrete Blade ***Asphalt Overlay Blades ****Asphalt Blades All blades 14 in diameter or larger have vertical insert undercut protection. All blades 14 to 26 in diameter have trapezoid undercut protection. All blades 14 to 26 in diameter have trapezoid undercut protection. All Wide Notch blades have vertical insert undercut protection. 1.800.421.5830 TO ORDER

4000 SERIES Models Part Number MK-4020B 20", 30Hp Baldor Electric Self-Propelled Saw 460V 3 Phase 167439-20 MK-4026B 26", 30Hp Baldor Electric Self-Propelled Saw 460V 3 Phase 167439-26 MK-4030B 30", 30Hp Baldor Electric Self-Propelled Saw 460V 3 Phase 167439-30 MK-4036B 36", 30Hp Baldor Electric Self-Propelled Saw 460V 3 Phase 167439-36 MK-4020KB 20", 44Hp Kubota Diesel Self-Propelled Concrete Saw 167420-20 MK-4026KB 26", 44Hp Kubota Diesel Self-Propelled Concrete Saw 167420-26 MK-4030KB 30", 44Hp Kubota Diesel Self-Propelled Concrete Saw 167420-30 MK-4036KB 36", 44Hp Kubota Diesel Self-Propelled Concrete Saw 167420-36 MK-4020KBG 20", 44Hp Kubota Diesel 3-Speed Gear Box 167420-20G MK-4026KBG 26", 44Hp Kubota Diesel 3-Speed Gear Box 167420-26G MK-4030KBG 30", 44Hp Kubota Diesel 3-Speed Gear Box 167420-30G MK-4036KBG 36", 44Hp Kubota Diesel 3-Speed Gear Box 167420-36G MK-4020KG 20", 57Hp Kubota Gas Self-Propelled Concrete Saw 172192-20 MK-4026KG 26", 57Hp Kubota Gas Self-Propelled Concrete Saw 172192-26 MK-4030KG 30", 57Hp Kubota Gas Self-Propelled Concrete Saw 172192-30 MK-4036KG 36", 57Hp Kubota Gas Self-Propelled Concrete Saw 172192-36 MK-4020KGG 20", 57Hp Kubota Gas 3-Speed Gear Box 172192-20G MK-4026KGG 26", 57Hp Kubota Gas 3-Speed Gear Box 172192-26G MK-4030KGG 30", 57Hp Kubota Gas 3-Speed Gear Box 172192-30G MK-4036KGG 36", 57Hp Kubota Gas 3-Speed Gear Box 172192-36G Saw Dimensions Height 47" (1,194mm) Wheel Base Length 16-1/2" (419mm) Minimum Saw Length (Transport) 64-1/4" (1,632mm) Blade Shaft Maximum Height 20-5/8" (524mm) Maximum Saw Length (Working) 107-1/2" (2,731mm) Weight Crated Maximum Pointer Length 21-1/4" (540mm) Kubota 1,180lbs (536kg) Frame Width 27" (686mm) Saw Width 34-3/4" (863mm) Weight Uncrated Front (Outside to Outside Wheel Width) 17" (432mm) Kubota 1,080lbs (490kg) Rear (Outside to Outside Wheel Width) Blade to Wall 27-1/2" (686mm) 2-1/4" (57mm) Quality & Performance MK Diamond Products has been in the construction manufacturing business for over a century and has built a reputation for quality products. With over three decades being focused on the manufacturing of saws, our engineering staff has designed some products and features that have become standards in the industry. Quality is a must when it comes to the precision necessary to build large flat saws. All MK-4000 Series are made in our state of the art facility, in Torrance, California. www.mkdiamond.com 2018 MK Diamond Products, Inc. All Rights Reserved. Images, prices and specifications are subject to change without notice. Baldor and Kubota are registered trademarks, not affiliated with MK Diamond Products, Inc. Part # AP080112 MK-4000 Series (01/18)