Wafer, Lug and Double Flanged Type

Document : PG0 :1 Product Group 0 Wafer, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011

: PG0 Product Group 0 Description Product Group 0 Butterfly Valves Triple eccentric metal seated butterfly valves are widely used in plants and high pressure piping system. The seat construction consists of a laminated or solid metal seat. The valve is capable of bi-directional flow and bubble tight shutoff at full rated pressure. AVAILABLE SERIES Series 0 Tripple Eccentric Wafer Type Metal Seated Butterfly Valve Series 640 Tripple Eccentric Lug Type Metal Seated Butterfly Valve Series 6 Tripple Eccentric Double Flanged Type Metal Seated Butterfly Valve STANDARD COMPLIANCE Face to face dimensions in accordance with API 9, EN 558, ISO 52, DIN 3202, MSS-SP- Certified Fire Safe Design in accordance with API 7, API 6FA and BS 65 PRODUCTION RANGE Size range DN (2") ~ DN 0 (80") Process Connections to ASME B16.5 / B16.47 Class ~0 Lbs, DIN PN 10~PN 63 Working Temperature range -253 C to +815 C Working Pressure Maximum 153 Barg (2220 psi) APPLICABLE FLANGE ASME B16.5 / B16.47, --0-0#, BS 3293 EN 1092 / DIN 21, PN 10, 16, 25, 40, 63 Wafer Type Lug Type Double Flanged Type Series 0 Series 640 Series 6 Page 1 www.globalvalvecenter.com 2011

Document : PG0 :1 Product Group 0 Design Principle & Seat Configurations Triple eccentric design principle Product Group 0 metal seated high pressure butterfly valves provide bi-directional bubble tight shut off using tripple eccentric disc geometry. The valve shaft is off set against the seat and the centre line of the valve body. The seating edges are machined with a continuously changing slope from an angle on top of the oval seat ring to an angle at the opposite side. This geometry ensures that the seat ring stays clear of the seat except at the final shut off position which results in long life seat. RETAINER METAL SEAL RING Metal to metal seat Various disc seals are available to comply with each temperature and pressure service applications. Solid metal seals are often used for temperatures above 510 C and up to 815 C or low temperature service. The laminated metal seal consisting of stainless steel with intermediate material of graphite or ceramic fiber layers is used widely. The laminated seal is secured to the disc with a bolt-on stainless steel clamp ring, and easily accessible for replacement. The graphite laminated seal is suitable for tempertures between -40 C and 6 C in general. The seal leakage meets API 598 or API 6D. The solid metal seating valve can be operated in a temperature range of -253 C to +815 C. Valves for cryogenic applications will be executed with an extended stem. GASKET LAMINATED SEAT Page 3 www.globalvalvecenter.com SOLID SEAT 2011

: PG0 Product Group 0 Application in major industries Petroleum refinery Fossil power plants Petrochemical plants Fire safe line Classification by Connection Nuclear power plants Cryogenic services Exhaust gas line & Steam line Series 0 Wafer To be installed between flanges using long bolts. Valve body with centering lugs for easy installation. Series 640 Lug To be installed between flanges. Valve body with full pattern threaded bolt holes, suitable for end-of-line service. Series 6 Double flanged To be installed between flanges. Valve body with 2 complete flanges suitable to connect with pipe flanges. Suitable for end-of-line service. Operations In general the following operation possibilities are available. Manual operation, handlever or gearbox. Pneumatic actuators. Electric actuators. Hydraulic actuators. Approvals, Certification PG 0 butterfly valves have the following approvals, certification. CE / PED. BV, DNV, LRS type approvals. Construction and material P.NO. 1 2 3 3.1 3.3 4 5 6 7 9 11 13 15 41 42 58 43 71 PART NAME BODY DISC SEAT BODY SEAT BODY SEAT GASKET DISC PIN RETAINER PACKING GLAND BOTTOM COVER BEARING PACKING THRUST PLATE BOTTOM GASKET RETAINER BOLT PACKING GLAND BOLT BODY SEAT BOLT BOTTOM COVER BOLT SEAT GASKET MATERIAL WCB, Stainless steel, NiAlBr. WCB, Stainless steel, NiAlBr. 316 stst +Graphite laminated, Solid stainless steel Stainless steel Graphite Stainless steel, monel Stainless steel, monel Stainless steel, monel Stainless steel, monel WCB, Stainless steel, NiAlBr. Stainless steel + PTFE Graphite Stainless steel Graphite Stainless steel A307 Gr. B (G) Stainless steel A307 Gr.B (G) Stainless steel Graphite Page 4 www.globalvalvecenter.com 2011

: PG0 Product Group 0 Series 0 Series 640 Wafer Class # Lug Class # Dimensions [mm] WAFER (inch) 2" 2.5" 3" 4" 5" 6" 8" 10" " 14" 16" 18" 20" 22" 24" SIZE LUG (inch) 2" 2.5" 3" 4" 5" 6" 8" 10" " 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" " 40" 44" 48" mm 65 80 5 2 3 0 0 5 0 6 0 7 800 0 0 1 00 L H1 H2 43 46 48 54 57 57 64 71 81 92 114 7 154 154 1 1 203 216 240 118 9 141 164 187 203 223 2 308 340 381 410 444 484 9 5 5 620 6 710 7 835 895 1 177 185 217 240 2 320 353 3 4 4 0 535 5 635 6 695 740 805 8 930 995 SQUARE SQ H3 17 22 TYPE TOP FLANGE * Flange dimensions in accordance with ASME #, BS PN6/PN10/PN16, DIN PN6/PN10/PN16, ISO PN6/PN10/PN16, JIS 5K/10K/16K b a 5 5 5 1 1 3 3 3 N-Z 4-4 - 4 - Page 5 www.globalvalvecenter.com 2011

: PG0 Product Group 0 Series 6 Double Flanged Class # Dimensions [mm] SIZE inch mm 2" 2.5" 3" 4" 5" 6" 8" 10" " 14" 16" 18" 20" 24" 26" 28" 30" 32" " 40" 44" 48" 54" " 72" 80" 96" 0" 65 80 5 2 3 0 0 0 6 0 7 800 0 0 1 00 13 0 0 0 2 0 L H1 H2 108 1 114 7 152 178 1 216 222 229 267 292 292 318 318 330 410 4 4 4 530 6 7 7 7 118 9 141 164 187 203 223 2 308 340 381 410 444 9 5 5 620 6 710 7 835 895 10 1 30 1622 5 1 177 185 217 240 2 320 353 3 4 4 0 5 635 6 695 740 805 8 930 995 00 1310 1510 10 19 2225 SQUARE SQ H3 17 22 2 2 TOP FLANGE TYPE b a * Flange dimensions in accordance with ASME #, BS PN6/PN10/PN16, DIN PN6/PN10/PN16, ISO PN6/PN10/PN16, JIS 5K/10K/16K F F 3 3 5 5 5 1 1 3 3 3 5 5 5 5 6 6 N-Z 4-4 - 4 - - 39-39 - 39-39 20-39 20-39 Page 6 www.globalvalvecenter.com 2011

: PG0 Product Group 0 Series 640 Lug Class # Dimensions [mm] SIZE TOP FLANGE inch mm L H1 H2 SQUARE SQ H3 TYPE b a 2" 2.5" 3" 4" 5" 6" 8" 10" " 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" " 40" 44" 48" 52" 54" 56" " 65 80 5 2 3 0 0 5 0 6 0 7 800 8 0 0 1 00 1 13 0 0 43 46 48 54 59 73 83 92 117 133 149 159 171 182 182 182 223 2 2 305 308 315 315 322 329 1 137 151 176 194 223 2 2 317 5 396 435 473 4 551 579 6 6 3 8 1 7 843 914 939 9 989 1081 171 191 215 225 252 305 340 385 481 516 576 1 642 6 8 7 778 808 846 8 938 1014 1119 20 69 1342 17 22 5 5 5 1 1 3 3 3 5 5 5 5 * Flange dimensions in accordance with ASME #, BS PN25, DIN PN25, ISO PN20/PN25, JIS 20K. N-Z 4-4 - 4 - - 39-39 - 39-39 Page 7 www.globalvalvecenter.com 2011

: PG0 Product Group 0 Series 6 Double Flanged Class # Dimensions [mm] SIZE TOP FLANGE inch mm L H1 H2 SQUARE SQ H3 TYPE b a 2" 2.5" 3" 4" 5" 6" 8" 10" " 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" " 40" 48" 52" 54" 56" " 80" 96" 0" 65 80 5 2 3 0 0 5 0 6 0 7 800 0 0 00 1 13 0 0 0 2 0 193 177 1 2 2 2 310 330 3 3 3 410 430 0 4 510 5 630 6 6 0 0 1 137 151 176 194 223 2 2 317 5 396 435 473 465 546 579 6 6 3 1 7 924 939 940 9 1081 1430 1622 5 171 191 215 225 252 305 340 385 481 516 576 5 642 6 8 7 778 846 8 4 1199 00 1342 10 19 2225 17 22 0 2 2 2 F F F 3 3 3 5 5 5 1 1 3 3 3 5 5 5 5 6 6 6 * Flange dimensions in accordance with ASME #, BS PN25, DIN PN25, ISO PN20/PN25, JIS 20K. N-Z 4-4 - 4 - - 39-39 - 39-39 20-39 20-39 20-39 Page 8 www.globalvalvecenter.com 2011

: PG0 Product Group 0 Series 6 Double Flanged Class 0# Dimensions [mm] SIZE TOP FLANGE inch mm L H1 H2 SQUARE SQ H3 TYPE b a 2" 2.5" 3" 4" 5" 6" 8" 10" " 14" 16" 18" 20" 24" 28" 30" 32" " 40" 65 80 5 2 3 0 0 0 0 7 800 0 0 173 177 1 2 2 2 310 330 3 3 2 518 531 574 667 1 137 151 176 234 248 307 3 371 4 7 492 559 598 9 674 696 764 171 191 211 241 264 321 3 414 469 497 539 595 655 6 721 749 791 859 17 22 5 5 5 1 1 3 3 5 * Flange dimensions in accordance with ASME 0#, BS PN40, DIN PN40, ISO PN40/PN40, JIS 40K. N-Z 4-4 - 4 - - 39 Page 9 www.globalvalvecenter.com 2011

: PG0 Product Group 0 Series 6 Double Flanged Class 0# Dimensions [mm] SIZE L H1 H2 SQUARE inch mm SQ H3 2" 201 191 2.5" 65 205 157 201 3" 80 205 171 2 4" 205 185 221 5" 5 225 216 248 6" 246 7 8" 251 2 434 17 10" 2 2 326 405 22 " 303 358 437 14" 3 330 387 485 16" 343 418 3 18" 0 378 473 555 20" 0 399 5 8 24" 0 479 5 7 28" 0 9 626 719 30" 7 6 6 3 32" 800 1 7 787 " 0 784 4 829 40" 0 881 8 923 44" 1 978 863 964 48" 00 1065 987 1089 * Flange dimensions in accordance with ASME 0#, DIN PN, ISO PN. TOP FLANGE TAPE b a 5 5 5 1 1 1 3 3 3 F40 406 4 F40 406 4 F40 406 4 F40 406 4 F40 406 4 5 5 N-Z 4-4 - 4-8 - 39 8-39 8-39 8-39 8-39 - 39-39 Page 10 www.globalvalvecenter.com 2011

: PG0 Product Group 0 CV Values Table CV Values Table for PG0 Size DISC OPENING Inch mm 10 20 30 40 80 3'' 80 11 26 76 116 156 207 7 292 4'' 17 39 66 1 171 305 408 431 6'' 41 95 163 6 422 5 2 1,006 1,063 8'' 73 182 3 432 723 1,035 1,3 1,8 2,0 10'' 2 119 296 534 4 1,179 1,8 2,179 3,082 3,376 '' 1 433 781 1,030 1,726 2,471 3,189 3,858 4,334 14'' 3 249 6 1,111 1,466 2,5 3,515 4,537 5,489 6, 16'' 313 776 1,399 1,8 3,0 4,424 5,711 6,9 7,7 18'' 0 407 1,008 1,818 2,397 4,015 5,749 7,422 8,978 10,084 20'' 0 477 1,181 2,9 2,808 4,3 6,733 8,693 10,516 11,811 22'' 5 3 1,520 2,740 3,3 6,052 8,664 11,186 13,532 15,198 24'' 0 7 1,800 3,2 4,280 7,1 10,263 13,2 16,028 18,003 26'' 6 830 2,056 3,7 4,888 8,187 11,721 15,132 18,306 20,5 28'' 0 971 2,406 4,338 5,721 9,581 13,718 17,9 21,423 24,062 30'' 7 1,133 2,808 5,062 6,676 11, 16,007 20,666 24,999 28,079 32'' 800 1,301 3,223 5,811 7,663,834 18,376 23,723 28,698 32,234 '' 0 1,720 4,2 7,1 10,130 16,966 24,291 31,359 37,9 42,9 40'' 0 2,1 5,292 9,541,582 21,072 30,1 38,949 47,117 52,921 Page 11 www.globalvalvecenter.com 2011

: PG0 Product Group 0 Torque Values Table Torque Values Table for PG0 (Excl. Safety Factor) Please consult us for advise on Safety Factors. Size Working Pressure Inch mm 5 Barg 10 Barg 16 Barg 19.6 Barg 3'' 80 25 Nm 33 Nm Nm 55 Nm 4'' 42 Nm 55 Nm Nm Nm 5'' 5 72 Nm 88 Nm 0 Nm Nm 6'' 5 Nm 1 Nm 240 Nm 285 Nm 8'' 2 Nm 315 Nm 380 Nm 4 Nm 10'' 2 3 Nm 488 Nm 0 Nm 7 Nm '' 4 Nm 6 Nm 1,000 Nm 1,2 Nm 14'' 3 6 Nm 940 Nm 1,3 Nm 1,7 Nm 16'' 885 Nm 1,2 Nm 1,885 Nm 2,380 Nm 18'' 0 1,0 Nm 1,8 Nm 2,480 Nm 3, Nm 20'' 0 1,515 Nm 2,340 Nm 3, Nm 4, Nm 22'' 5 1,880 Nm 2,9 Nm 4,3 Nm 5,0 Nm 24'' 0 2,430 Nm 3,5 Nm 5,3 Nm 6,0 Nm 26'' 6 2,0 Nm 3,8 Nm 5,7 Nm 7,1 Nm 28'' 0 3, Nm 4,3 Nm 6,0 Nm 8, Nm 30'' 7 3,4 Nm 5,0 Nm 8,0 Nm 10,880 Nm 32'' 800 3,0 Nm 6, Nm 10, Nm,580 Nm '' 0 4,800 Nm 8,000 Nm 14, Nm 17,0 Nm 40'' 0 6,000 Nm 10, Nm 18,0 Nm 23,000 Nm Page www.globalvalvecenter.com 2011

: PG0 Product Group 0 Product Group Bonded Rubber Liner Butterfly Valves Product Group Replaceable Rubber Liner Butterfly Valves Product Group Cassette Type Rubber Liner Butterfly Valves Product Group Double Eccentric Replaceable Seat Ring Type Butterfly Valves Product Group 0 High Performance Butterfly Valves Product Group 0 Tripple Eccentric Metal Seated Butterfly Valves Product Group 0 Disc Seated Butterfly Valves Product Group 800 Cryogenic Butterfly Valves (LPG, LNG) Product Group 0 Damper Butterfly Valves Global Valve Center B.V. Zwaalweg 14 2991 ZC Barendrecht The Netherlands Tel 1 +31 (0) 39 89 38 Tel 2 +31 (0) 39 88 69 Fax +31 (0) 84 22 98 163 Page 13 www.globalvalvecenter.com 2011