Worm gear Worm Gears 2010 Description Worm gear for universal applications Center distance 20 mm Compact design Outer dimensions 60x60x35 mm 7 ratios of 13:1 to 65:1 Aluminium housing, anodized Maintenance-free Special features Smallest dimensions for max. torque Smooth and silent running Simple screw mounting Customer specific Other ratios are available on request. 2010.75-02/20160627
Worm gear 2010 M4X8 (4x) 30 16 M5X8 11,25 11,25 + 0,008) n 12 j6 ( - 0,003 4 feather key DIN685-A-4X4X30 25 25 4 n 4,2 through-going (4x) 60 42,5 M4X8 (4x) 33 20 13 13 1,5 13,8 1,5 17,5 42,5 35 n 4,2 through-going (2x) n 12 H7 ( + 0,018 ) 15,5 15,5 12 M4X8 (4x) 60 M4X8 (4x) Technical data Aluminium housing, anodized Outer dimensions 60x60x35 mm Input Ø12j6, output Ø12H7 Permitted operating temperature -20 to 60 C Backlash +/-1 Duty cycle of 20% (at 5 min.) Lifetime at 500 min -1 and duty cycle of 20% is about 1000 hours Item number Ratio i Self locking static Max. drive torque M in Nm Max. output torque M in Nm Speed range n in rpm Radial force 1) F R in N Axial force 2) F A in N Degree of efficiency in % Weight in g 2010.00-V01R65 65 : 1 yes 0.2/0.2/0.2 4.5/3.8/3.0 100/500/1000 200 200 31 432 2010.00-V02R40 40 : 1 yes 0.4/0.3/0.3 5.5/4.8/4.0 100/500/1000 250 250 37 426 2010.00-V03R30 30 : 1 yes 0.6/0.5/0.4 8.5/7.0/5.5 100/500/1000 250 250 45 438 2010.00-V04R23 23 : 1 yes 0.9/0.7/0.5 10.0/8.0/6.0 100/500/1000 250 250 50 428 2010.00-V05R18 18 : 1 yes 1.1/0.9/0.7 11.0/9.0/7.0 100/500/1000 350 350 51 426 2010.00-V06R15 15 : 1 no 1.5/1.3/1.0 12.0/10.0/8.0 100/500/1000 400 400 54 425 2010.00-V07R : 1 no 2.1/1.8/1.5 15.0/13.0/11.0 100/500/1000 500 500 58 422 1) maximum radial force at F A =0 2) maximum axial force at F R =0 2010.75-02/20160627
Worm gear Worm Gears 4731 4733 4744 4745 Description Compact worm gear. Special features Ratio 1:1, 2:1, 3.25:1, 4.33:1, 5:1, 7:1, 8.5:1, 17:1, 20:1, 30:1 Housing made of die-cast zinc Gear with synthetic friction bearing Customer specific Input and output can be modified to customer requirements. 4731.75-02/20160629
Worm gear 4731/4733/4734/4737/4739/4742 ø26 bore holes - output side (see table) 30 output opening for through shaft (see table) 49 70 60 input opening (see table) 24 40 bore holes - input side (see table) 40 Example: Detail Z 4739.00-1341 Z Designation of the last 4 figures of the order number bore holes - output side (see drawing) bore holes - input side (see drawing) output opening for through shaft (see drawing) input opening for through shaft (see drawing) 3.3 mm M4 7 mm M4 M8 square 10 mm square 8 mm Tr14x4 right hex 9 mm hex 10 mm hex 6 mm hex 7 mm square 8 mm 1XXX 2XXX X1XX X2XX X3XX XX1X XX2X XX3X XX4X XX5X XXX1 XXX2 XXX3 Technical Data Model 4731.00-XXXX 4743.00-XXXX 4733.00-XXXX 4734.00-XXXX 4735.00-XXXX Ratio 1:1 2:1 3.25:1 4.33:1 5:1 Self-locking no no yes yes yes Max. output torque 2 Nm 3 Nm 4 Nm 5 Nm 5 Nm Model 4737.00-XXXX 4739.00-XXXX 4744.00-XXXX 4742.00-XXXX 4745.00-XXXX Ratio 7:1 8.5:1 17:1 20:1 30:1 Self-locking yes yes yes yes yes Max. output torque 7 Nm 9 Nm 12 Nm 15 Nm 17 Nm 4731.75-02/20160629
Worm gear Worm Gears 4747 4749 4751 4755 Description Compact worm gear. The input is on the wide side of the gear. The gears is particularly suitable for manual operation. Customer specific On customer request, the gear is also available left-handed. Special features Ratio 1:1, 2.5:1, 3.33:1, 4.33:1, 6:1, 13:1 Gear with synthetic friction bearing Worm and cog wheel made of case hardened steel Housing made of die-cast zinc Special model with bronze bearing 4747.75-02/20151009
Worm gear 4747/4749/4751/4752/4754/4755 35 17 hex 6 mm Output Input hex 6mm ø 4.3 (4x) 13.8 4.2 15 29 42 26.5 R2 R2 Technical Data Model 4747.00-00 4749.00-00 4751.00-00 Ratio 4.33:1 2.5:1 1:1 Self-locking yes no no Input hex 6 mm hex 6 mm hex 6 mm Output hex 6 mm hex 6 mm hex 6 mm Max. output torque 2 Nm 2 Nm 2 Nm Max. drive torque 3 Nm 3 Nm 4 Nm Model 4752.00-00 4754.00-00 4755.00-00 Ratio 3.33:1 6:1 13:1 Self-locking yes yes yes Input hex 6 mm hex 6 mm hex 6 mm Output hex 6 mm hex 6 mm hex 6 mm Max. output torque 2.5 Nm 3 Nm 3 Nm Max. drive torque 3 Nm 2 Nm 1 Nm 4747.75-02/20151009
Worm gear Worm Gears 4748 4750 4751 4752 4767 Description Compact worm gear. The input is on the small side of the gear. The gears is particularly suitable for manual operation. Customer specific On customer request, the gear is also available left-handed. Special features Ratio 1:1, 2:1, 2.8:1, 4.33:1, 10:1, 14:1, 15:1 Gear with synthetic friction bearing Worm and cog wheel made of case hardened steel Housing made of die-cast zinc Special model with bronze bearing 4748.75-02/20151009
Worm gear 4748/4750/4751/4753/4757/4758/4763/4767 35 17 hex 6mm Input Output hex 6mm ø 4.3 (4x) 13.8 4.2 15 29 42 26.5 R2 R2 Technical Data Model 4748.00-00 4750.00-00 4751.00-00 4753.00-00 Ratio 4.33:1 10:1 1:1 2.8:1 Self-locking yes yes no no Input hex 6 mm hex 6 mm hex 6 mm hex 6 mm Output hex 6 mm hex 6 mm hex 6 mm hex 6 mm Max. output torque 2 Nm 4 Nm 2 Nm 2.5 Nm Max. drive torque 3 Nm 3 Nm 4 Nm 3 Nm Model 4757.00-00 4758.00-00 4763.00-00 4767.00-00 Ratio 14:1 15:1 23:1 2:1 Self-locking yes yes yes no Input hex 6 mm hex 6 mm hex 6 mm hex 6 mm Output hex 6 mm hex 6 mm hex 6 mm hex 6 mm Max. output torque 5 Nm 4 Nm 3 Nm 2 Nm Max. drive torque 2.5 Nm 1 Nm 1 Nm 3 Nm 4748.75-02/20151009
Your partner in quality engineering products since 1986 Thank you for viewing product information on TEA s range of engineering components. Now please contact us at the nearest office to you for any further information, prices and availability: AUSTRALIA & New Zealand USA, South America & Canada T.E.A. Transmissions Pty Ltd T.E.A. Machine Components Inc. Tahiti Road 2281-F Dabney Road Tiaro Qld 4650 Richmond Virginia 23230 Australia USA Ph: 61-(0)7 4129 2533 Ph: 1-804-342-0004 Fax: 61-(0)7 4129 2437 Fax: 1-804-342-0006 Email: sales@tea.net.au Email: sales@teausa.net www.tea.net.au www.teausa.net You are assured of prompt and efficient service at all time.