Company Profile. Our parent Company. KWS A member of the THIELE-Group

G r a d e 8 0 Company Profile Our parent Company The company was founded in 935 by August Thiele. Chains were even welded in forge with only 8 employees. Later on automatic bending and welding machines facilitated the hard physical strain. In the fifties THIELE began the production of chains for the mining industry. The stainless steel (23 MnNiMoCr 54) generally used for high-performance chains was invented engineers. All heavy mining-chains have been designed and introduced by THIELE. The development of rated sizes of 22 to currently 48 mm for mining-chains has also been carried out. Quality Philosophy We are one of the first companies in the industry to comply worldwide with the quality assurance criteria outlined by DIN EN ISO 900. Based on the traditions of our company, we are steadily propelling our product process and organization development forward. Our quality target is zero defects anything less is unacceptable. Consistently and thoroughly applied quality inspections during all production phases and indepth final product inspections guarantee that we come as close to this goal as humanly possible. At the end of the sixties Schlieper and Nordland were taken over. As a result, the product range was extended by heavy anchor chains and snow chains. In addition to aforementioned companies, the following also belong to the THIELE group: Reilloc Chain (UK), THIELE Asia (SIN) Today the THIELE group produces 5000 different chains and accessories. Our target to be innovative leaders in chain technology has been proved several times in company history. We built the longest (95 m) and heaviest (00 t) anchor chains in the world. KWS A member of the THIELE-Group In 995 Mr. Ulrich Thiele established operations in the United States specifically focused on the sales of the THIELE brand of overhead lifting chain and components. Since then, Conveying Chain, Fishing Chain, Hoists and Hoist Chains have been added to the product line. New products are continually being added, most recently Magnet Chain Assemblies. Still today the company is familyowned. In close cooperation with our customers we always search for better and more innovative solutions. We are also supported by renowned universities and leading research institutes. We are continuously researching new knowledge in material technique and shaping in order to develop lighter, more solid and safer products. 2 The Name

G r a d e 8 0 Content Page. Information 2 2. Lifting Products Grade 00 3 3. Lifting Products Grade 80 27 4. Hoist Rings 5 TLP Hoist Rings 5. Hoist Chains 59 Hebezeugketten 7. Hand Powered Cranes (TM-Series) 6 TM Hoists 8. Rust & Acid Resistant Round Steel Chains 68 5. Fishing Chains 70 9. Conveyor Chains for Poultry Industry 7 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 3

G r a d e 8 0 General Information Sales-Service Our Sales- and Technical staff is available for you during work hours and can be reached under the following contact information. Address: KWS Inc. P.O. Box 470487 Tulsa OK 7447 Toll Free -800-872-933 Phone (98) 665-44 Fax (98) 665-48 email: sales@kwschain.com Working hours Mo. Fr.: 8:00 am 5:00 pm central time Closed for lunch from noon - :00 pm central time 4 The Name

G ü t e k l a s s e 8 / G r a d e 8 0 KWS, Inc. Conditions of Sale & Limited Warranty Payment Terms: Delivery Terms: Cut Chain: Special Items: Returns: WARNINGS: % 0 days, net 30 days from date of invoice F.O.B. shipping point Freight prepaid at lowest tariff rate on shipments of 000+ lbs. A minimum charge of 20% per foot will be applied to each length of chain cut from stock All orders for non-stock items will be accepted based on the understanding that the delivered quantity can vary plus or minus 0% from the original quantity and invoice will be issued accordingly. Return requests will only be honored on standard items in NEW condition and within 90 days from original invoice date. Customer is responsible for return freight. If returned item is part of original prepaid shipment, a portion of original freight will also be assessed against the returned item. Minimum standard restocking charge is 20% or $25.00 whichever is greater. If item is not in new condition, credit will not be issued and item will be discarded. To prevent accidents, proper selection, application, and loading of chains and accessories is absolutely necessary. NEVER exceed the published working load limits of chains and accessories. Accessories must always have equal or higher working load limits than the chain. THIELE Plant Standard (TWN) THIELE Plant Standards fulfill the requirements of the EG Directive for Machines, particularly for the safety relevant components. The Working Load Limits and the test requirements are more strict than the European Standards. Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 5

Product Overview XL / Grade 00 TWN 805 TWN 0072A Page 5 XL / Grade 00-Round Steel Link Chains TWN 807A TWN 808A TWN 809A TWN 80/ TWN 80/2 TWN 80/4 Page 6 8 XL / Grade 00-Suspension Components TWN 820 Page 9 XL / Grade 00-LOK Connector TWN 836 TWN 837 TWN 840/ TWN 84/ Page 9 2 XL / Grade 00-Hooks 6 The Name XL-Hooks

TWN 827/ TWN 85 TWN 852 TWN 853 Page 2 23 XL / Grade 00-Shortening Components TWN 82 TWN 87 Page 23 24 XL / Grade 00-Shackles TWN 0945 Grade 00 Spare Parts TWN 946 Stainless Steel Tags Page 24 26 XL / Grade 00-Spare Parts and Accessories Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 7

G r a d e 8 0 Product Overview / Grade 80 TWN 0805A Page 30 / Grade 80-Round Steel Link Chains TWN 0807A TWN 0796 TWN 0808A TWN 0809A TWN 080/ TWN 080/2 TWN 080/4 TWN 085 TWN 086 TWN 087 TWN 0820 Page 3-34 / Grade 80-Suspension Components TWN 320 KWS TWN 0829 Page 35 / Grade 80- Connecting Links 8 The Name

G r a d e 8 0 TWN 0798 TWN 0799 TWN 340/ TWN 0835/ TWN 0854 TWN 0855/ TWN 0856 TWN 0856H TWN 0858/ TWN 0859 TWN 0850/ OCTA-STAR OCTA-STAR OCTA-STAR Page 35-39 / Grade 80-Hooks TWN 0827 TWN 0827/ OCTA-STAR OCTA-STAR OCTA-STAR TWN 085 Page 40-4 / Grade 80-Shortening Components TWN 086 TWN 0862 TWN 0870 TWN 087 Page 4-42 / Grade 80-Shackles Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 9

G r a d e 8 0 Magnet Chain Slings Page 43 / Grade 80-Magnet Chain Slings TWN 400 TWN 40 Page 43 / Grade 80-Tensioning and Lashing Chains Stainless Steel tag TWN 0945 TWN 0946 TWN 0402 Spare Parts Page 44-45 / Grade 80-Spare Parts TWN 908/5 Chain and Wire Rope Cutter Page 48 / Grade 80-Spare Parts 0 The Name

G r a d e 8 0 TWN 0449 TWN 0536 TWN 070/ Page 49 / Grade 80-Chain Slings Form K Form K2 Form K22 Page 49 / Grade 80-Endless Chains TWN 09A TWN 02/ TWN 022 TWN 023 TWN 024 TWN 027 TWN 20 TWN 830 TWN 880 TWN 890 TWN 470 Page 5-57 / Grade 80- / XL / Grade 00-Hoist Rings Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com

G r a d e 8 0 Marine and Offshore Calibrated Chains for Hoists Hebezeugketten TM Hoists TWN 000 TM-Chain Hoist TWN 00 TM-Lever Hoist TM-Girder Clamp TM Hoists Spare Parts TM-Series Rust & Acid Resistant Round Steel Chains TM Hoists Chains for Fishing Industry Chains and Accessories for Poultry Industry Page 50-69 2 The Name

XL-Program Comparison between Grade 80 and Grade 00 Save up to 30% weight on a 2-leg chain sling. for Example: THIELE Plant Standard Pieces Master Link TWN 808A XL-LOK TWN 820 2 m Round Steel Link Chain TWN 805A Clevis Sling Hook TWN 840/ 2 2 2 weight G ü t e k l a s s e 8 / G r a d e 8 0 Grade 80 Grade 00 2 9,900 lbs. 5,200 lbs. 26,000 lbs. 3 Working Load Limit Working Load Limit G ü t e k l a s s e 8 / G r a d e 8 0 Grade 80 Grade 00 Saving 9,900 20.5 4.5 30 % 9,200 36.4 23.3 35 % 26,000 59.0 40.6 3 % Properties G ü t e k l a s s e 8 / G r a d e 8 0 Grade 80 abt. 30 % less Breaking Stress 800 N/mm 2,000 N/mm 2 Application Temperature - 40 to 400 F - 20 to 400 F US ASTM - 20 to 700 F US PAS* Acids and Lyes not allowed not allowed Compatiblity with other systems yes restricted Color Round Steel Link Chains black painted (RAL 9005) - = grey painted (RAL 70) - = blue painted (RAL 5002) Color Forgings powder coated red (RAL 3003) blue powder coated (RAL 5002) Standards European EN and International www.kwschain.com European PAS and International 3 ANSI and ASTM ANSI and ASTM * Reduction starting at 400 F Grade 00 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 3

XL-Working Load Limit Tables Working Load Limit in lbs. direct sling Table Single Sling (lbs.) 90 Angle of Lift Double Sling (lbs.) Triple and Quad Sling (lbs.) 60 Angle 45 Angle 30 Angle 60 Angle 45 Angle 30 Angle Chain Size Chain Size 6 7 8 0 3 6 20 22 26 *WLL acc. to ASTM Inclination Angles over 30 are prohibited! WARNING! Can fail if damaged, misused or overloaded. Inspect before use. Use only if trained. Observe rated capacity in table, 2, 3. DEATH or INJURY can occur from improper use or maintenance. PROOF TESTED Endless chain 9/32 2,700 4,300 5,700 8,800 5,000 22,600 35,300 42,700 58,300 4,700 7,400 9,900 5,200 26,000 39,00 6,00 74,000 0,900 3,800 6,00 8,00 2,400 2,200 32,000 49,900 60,400 82,900 2,700 4,300 5,700 8,800 5,000 22,600 35,300 42,700 58,300 7,000,200 4,800 22,900 39,000 58,700 9,700 0,900 53,500 β>30 K K2 K22 5,700 9,00 2,00 8,700 3,800 47,900 74,900 90,600 25,00 4,000 6,400 8,500 3,200 22,500 33,900 53,000 64,000 88,000 4 The Name

XL-200 Grade 00 Round Steel Link Chains TWN 0072A according to ASTM 973 XL-400 Grade 00 Round Steel Link Chains TWN 805 according to PAS 06 TWN 0072A XL-200 TWN 805 XL-400 mm Part. No. 6 - XL F066A 7 - XL F062A 8 - XL F067A 0 - XL F068A 3 - XL F069A 6 - XL F0620A 20 - XL F0638B 22 - XL F0650B 26 - XL F0660B XL-200 Nominal Size (d) Pitch (p) (inch) Pitch Tolerance (±) (inch) Inside Width w min. (inch) Outside Width w2 (inch) Working Load Limit (lbs) (lbs/ft) 0.7 0.02 0.38 0.8 3,200.98 9/32 0.83 0.03 0.38.02 4,300 2.64 0.95 0.03 0.43.7 5,700 3.53.8 0.04 0.5.46 8,800 5.5.54 0.05 0.6.90 5,000 9.04.89 0.06 0.8 2.33 22,600 3.66 2.36 0.07.02 2.92 35,300 22.26 2.60 0.08.3 3.2 42,700 27. 3.07 0.09.33 3.79 58,330 37.69 TWN 0072A / XL 200 acc. to ASTM 973 Elongation at break, self colored, min. 25%; other surface finishes min 20%. Factor: Load- to Proof- to Breaking Stress : 2 : 4 Finish: Iron grey, RAL 70 XL-400 TWN 805 / XL 400 acc. to PAS 06 Elongation at break, self colored, min. 25%; other surface finishes min 20%. Factor: Load- to Proof- to Breaking Stress : 2.5 : 4 Finish: Blue RAL 5002 d p W W2 We provide high working load chains needed for today s new energy sources. Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 5

XL-Suspension Components B D The Master Link Form A TWN 807A according to DIN 5688 for -leg chain slings enables an easy assembly of an XL-LOK TWN 820. This Suspension component s coupling offers a higher flexibility in sling assembly with the advantage of less inventory. The Master Link Form A TWN 807 is suitable for Crane Hooks according to DIN 540: F Crane Hook No Crane Hook No. 6 XL No. 2.5 3 XL No. 6 8 XL No. 2.5 6 XL No. 8 0 XL No. 5 Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit D F B. 6-XL 8-XL 0-XL 3-XL 6-XL 22-XL F80706 F80708 F8070 F8073 F8076 F80722 3,200 5,700 8,800 5,000 22,600 42,700 0.5 3.55.97 4.33 2.36 0.7 5.2 2.76 0.87 6.30 3.55.02 7.09 3.94.42 9.84 5.5 0.64.7.74 3.3 5.07 3.67 B D The Master Link Form A TWN 808A according to DIN 5688 for 2-leg chain slings enables an easy assembly of an XL-LOK TWN 820. This Suspension Components coupling offers a higher flexibility in sling assembly with the advantage of less inventory. The Master Link Form A TWN 808 is suitable for Crane Hooks according to DIN 540: p F Crane Hook No Crane Hook No. 6 XL No. 2.5 3 XL No. 8 8 XL No. 5 6 XL No. 0 0 XL No. 6 Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit D F B. 6-XL 8-XL 0-XL 3-XL 6-XL 22-XL F80806 F80808 F8080 F8083 F8086 F80822 5,500 9,900 5,200 26,000 39,00 74,000 0.5 3.55.97 0.7 5.2 2.76 0.79 5.52 3.5.02 7.09 3.94.26 9.06 4.93.77 2.60 6.89 0.64.74 2.42 5.07 9.70 26.46 6 The Name

The Master Link Assembly TWN809A according to DIN 5688 for -leg chain slings enables easy assembling of an XL-LOK TWN 820. B D The Master Link Assembly TWN 809 is suitable for Crane Hooks according to DIN 540: Crane Hook No Crane Hook No. 6 XL No. 5 3 XL No. 0 8 XL No. 6 6 XL No. 6 0 XL No. 8 E F F D B Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E D F B D F B. 6-XL 8-XL 0-XL 3-XL 6-XL 22-XL F80906 F80908 F8090 F8093 F8096 F80922 6,720,82 7,920 3,360 4,488,000 6.70 4.33 2.36 0.5 2.36.8 8.27 0.79 5.52 3.5 2.76.38 0.64.02 7.09 3.94 0.79 3.55.77 3.79.26 9.06 4.93.02 4.3 2.36 6.55.43 6.30.0 5.2 2.56 20.47.973.39 7.48 7.09 3.54 2.07 3.97 8.38 6.97 28.65 6.73 The Fixed Size Master Link Assembly TWN 80/ Type TAA for - leg chain slings is automatically determined to the nominal size by the Ringshackle The Ringshackle moves freely A welded identification tag contains all the data required The dimensions are in accordance with DIN 5688, form A The Fixed Size Master Link Assembly Type TAA can also be delivered without the Ringshackle as a Master Link TWN 807. F B D The Fixed Size Master Link Assembly TWN 80/ is suitable for Crane Hooks according to DIN 540: E Crane Hook No Crane Hook No. 6 XL No. 2.5 3 XL No. 6 8 XL No. 2.5 6 XL No. 8 0 XL No. 5 6-XL 8-XL 0-XL 3-XL 6-XL F8006 F8008 F800 F803 F806 Nominal Size Working Load Limit 3,200 5,700 8,800 5,000 22,600 Finish: RAL 5002 E D F B 5.56 0.5 4.33 2.36 5.79 4.33 2.36 7.3 0.7 5.32 2.96 8.63 0.87 6.30 3.55 9.69.02 7.09 3.94. 0.99.63 2.64 5.29 8.60 7 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 7

B D The Fixed Size Master Link Assembly TWN 80/2 Type TAA2 for 2- leg chain slings is automatically determined to the nominal size by the Ringshackle The Ringshackle moves freely A welded identification tag contains all the data required The dimensions are in accordance with DIN 5688, form A The Fixed Size Master Link Assembly Type TAA2 can also be delivered without the Ringshackle as a Master Link TWN 808. E F The Fixed Size Master Link Assembly TWN 80/2 is suitable for Crane Hooks according to DIN 540: Crane Hook No Crane Hook No. 6 XL No. 2.5 3 XL No. 8 8 XL No. 5 6 XL No. 0 0 XL No. 6 Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E D F B. 6-XL 8-XL 0-XL 3-XL 6-XL F80206 F80208 F8020 F8023 F8026 5,500 9,900 5,200 26,000 39,00 5.56 0.5 4.33 2.36 6.78 0.7 5.32 2.96 8.2 0.87 6.30 3.55 9.42.02 7.09 3.94 0.48.26 7.88 4.33.9 2.64 5.07 8.82 5.65 E F B D The Fixed Size Master Link Assembly TWN 80/4 Type TAA4 for - leg chain slings is automatically determined to the nominal size by the Ringshackle The Ringshackle moves freely A welded identification tag contains all the data required The dimensions are in accordance with DIN 5688, form A The Fixed Size Master Link Assembly Type TAA4 can also be delivered without the Ringshackle as a Master Link TWN 809. The Fixed Size Master Link Assembly TWN 80/4 is suitable for Crane Hooks according to DIN 540: Crane Hook No Crane Hook No. 6 XL No. 5 3 XL No. 0 8 XL No. 6 6 XL No. 6 0 XL No. 8 Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E D F B D. 6-XL 8-XL 0-XL 3-XL 6-XL F80406 F80408 F8040 F8043 F8046 6,720,82 7,920 3,360 4,488 8.67 0.9 5.32 2.96 0.5 0.52 0.87 6.30 3.55 2.25.02 7.09 3.94 0.7 4.74.26 2.88 4.33 0.87 8.36.42 0.24 5.52.02 3.53 6.83.02 20.94 36.5 8 The Name

XL-LOK Connector The XL-LOK -Connector TWN 820 consists of two lok halves, which enables the assembly of Round Steel Link Chains or various components and lifting points to each other. C G The lok halves are interchangeable. The assembly does not require an expensive bushing. The assembly will be completed with two locking spirol pins according to the assembly instructions as shown below. 00% Magnetic Crack Tested. BG - approved. Finish: Blue powder coated A E Part.-No. Nominal Size Working Load Limit E G A C. 6-XL 8-XL 0-XL 3-XL 6-XL 22-XL F30807 F3087 F30827 F30837 F30847 F3086 3,200 5,700 8,800 5,000 22,600 42,700.77 0.55 2.40.52 2.44 0.75 2.79 2.7 2.84 0.94 3.35 2.58 3.43.0 2.83 3.25 4.3.35 5.76 4.29 5.5.86 7.87 6.50 0.5 0.44 0.77.63 2.56 7.76 XL-Hooks D The Eye Self Locking Hook TWN 836 automatically locks under load. The flattened extra large eye offers universal coupling options. A robust trigger at the back side of the hook can be easily hand-operated. Despite an extra wide hook opening, the Eye Self Locking Hooks offer a slim shape and enable a versatile use. The available Trigger Sets are universal for hooks type TWN836 and 837. E G C H Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E D G H C. 6-XL 8-XL 0-XL 3-XL 6-XL 22-XL F092203 F09223 F092223 F092233 F092243 F092273 3,200 5,700 8,800 5,000 22,600 42,700 4.33 0.83.0 0.79.34 5.39.06.4.02.8 6.65.36.77.22 2.28 8.23 www.kwschain.com 2..6 2.72 0.97 2.46.97 3.39 2.57 2.76 3.5 2.56 3.86.0.85 3.28 6.459 2.84 25.86 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 9

The Clevis Self Locking Hook TWN 837 automatically locks under load. E G A robust trigger at the back side of the hook can be easily hand-operated. Despite an extra wide hook opening, the Clevis Self Locking Hooks offer a slim shape and enable a versatile use. The available Trigger Sets are universal for hooks type TWN836 and 837. C H Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E G H C. 6-XL 8-XL 0-XL 3-XL 6-XL 22-XL F092002 F09202 F092022 F092032 F092042 F092072 3,200 5,700 8,800 5,000 22,600 42,700 3.78.0 0.79.34 4.84.4.02.8 5.67.77.22 2.28 7.7 2..6 2.72 8.54 2.46.97 3.39 0.89 3.5 2.53 3.86.04.95 3.38 6.62 3.05 27.4 The new Sling Hook TWN840/. Complete Performance: Great Strength, Stability and Value G Simply Better: The new design of the TWN 840/ Sling Hook offers an ergonomic design for easier and more comfortable use. E C The TWN 840/ is designed with a wide throat opening and fitted wear edges ensuring easily handled loads. The TWN 840/ also comes standard with a forged safety latch designed for tough service and long life. H Finish: RAL 5002 6-XL 8-XL 0-XL 3-XL 6-XL Part.-No. F336050 F33650 F336250 F336350 F336450 Nominal Size 9/32 Working Load Limit 3,200 5,700 8,800 4,800 22,000 E G H C 3.00.00 0.87 0.62 3.63.8.00 0.87 4.50.50.25.06 5.25.63.63.37 6.37 2.00 2.00.63. 0.75.66 3.0 5.50 9.70 20 The Name

The new Eye Slip Hook TWN84/. Complete Performance: Great Strength, Stability and Value D2 Simply Better: The new design of the TWN 84/ Sling Hook offers an ergonomic design for easier D and more comfortable use. G The TWN 84/ is designed with a wide throat opening and fitted wear edges ensuring easily handled loads. The TWN 84/ also comes standard with a forged safety latch designed for tough service and long life. E C H Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit 2 E D D 2 G H C. 6-XL 8-XL 0-XL 3-XL 6-XL 22-XL F32905 F3295 F32925 F32935 F32945 F32975 9/32 3,200 5,700 8,800 4,800 22,000 42,700 3.50 0.44 0.8.00 0.75 0.83 4.63 0.50.09.9.00 0.88 5.75 0.69 0.50.50.75. 6.63 0.8 0.62.62.62.37 8.75.00 2.2 2.00 2.00.62 0.67 2.56 4.92 4.6 2.44 2.3 0.75.75 3.25 5.63 0.25 2.55 XL-Shortening Components The Shortening Hook TWN 827/ The Shortening Hook TWN827/ according to DIN 5692 makes the lifting of loads safer. The new shape of the shortening Hooks TWN 827/ offer you much more safety than with conventional shortening hooks. The extra wide chain attachment enables us toguarantee you an especially firm seating of the inserted chain link and it is also protected from damage at the same time. The locking pin prevents an accidental loosening of the sling chain. With our new TWN 827/ shortening hook, we are offering you grade 0 perfection together with a long shelf life of your slinging equipment. 00% Magnetic Crack Tested. BG-approved. L E G C B Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E G L B C. 6-XL * 8-XL * 0-XL 3-XL * 6-XL * *In development F3395 F33205 F3325 F33225 F33235 3,200 5,700 8,800 5,000 22,600 - - - - - - - - - - 3.27 0.49 5.20 2.68 - - - - - - - - - - - - 2.09 - - Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 2

M The Clevis Shortening Claw TWN 85 proven over many decades, has been further developed into the Grade XL and clevis is designed to the corresponding nominal size. L E The chain has a safe seat in the claw pocket so that premature release is avoided. Proven design Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E L M. 6-XL 8-XL 0-XL 3-XL 6-XL F34904 F34924 F34934 F34944 F34954 3,200 5,700 8,800 5,000 22,600 2.3 3.9.26 3.5 4.53.80 3.55 5.28 2.2 4.6 6.90 2.84 5.67 8.43 3.39 0.46.34 2.2 4.4 7.87 M The RAPID-Shortening Claw TWN852 can be assembled and disassembled fast and easily with no additional tools. The ergonomic and compact design enables its positioning at any place on the chain. Two robust locking devices avoid the unsafe release of the chain in a loaded or unloaded condition. The locking device is equipped with a robust spring system. L E 00% Magnetic Crack Tested. BG-approved. Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit [lbs] E L M. [lbs] 6-XL* 8-XL 0-XL 3-XL 6-XL *In development F34765 F34775 F34780 F34785 F34790 3,200 5,700 8,800 5,000 22,600 - - - 4.37 5.83,89 5.28 7.09 2.36 7.05 9.45 3.07 8.74.65 3.78 -.74 3.3 5.95 0.58 22 The Name

The Combi Quick Fastener TWN 853 according to DIN 5692 makes for fast and extremly easy handling. The flat design and easy handling make it safe and convenient for the operator. It offers an integrated Clevis connection for the chain to be shortened, and allows for only one ring shackle per chain leg. Thanks to the locking pin, there is no unintended unlocking of the chain. 00 % Working Load Limit of the chain, 00 % Crack Tested, and BG - approved. L E M Finish: RAL 5002 6-XL * 8-XL * 0-XL 3-XL * 6-XL * 22-XL *In development Part.-No. F349355 F349845 Nominal Size XL-Special Sling Component Working Load Limit 3,200 5,700 8,800 5,000 22,600 42,700 The forged Ringshackle TWN82 is automatically determined to the nominal size. It is used as a lower terminal in the chain sling to be connected to a clevis lashing point. Coupling with a XL-LOK is possible. 00 % Magnetic Crack Tested. BG - approved. E L M 4.2 4.65.85 5.63 6.22 2.48 6.97 7.64 3.07 9.0 9.92 3.94 9.76.46 6.8 4.37 5.59 6.38 E. 0.88.87 3.53 7.50.46 29.98 D 2 D B Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E D D 2 B. 6-XL 8-XL 0-XL 3-XL 6-XL F3704 F374 F3724 F3734 F3744 3,200 5,700 8,800 5,000 22,600.22 0.67.54 0.32 0.22.46 0.83.97 0.43 0.44.8.02 2.44 0.55 0.86 www.kwschain.com 2.32.30 3. 0.7 2.96.65 3.94 0.9 2.83 3.50 23 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 23

XL-Shackles D E Bolt Shackle Type C, TWN 87 dimensionally in accordance with DIN 820. Supplied with galvanized bolt, nut and split pin. 00% Magnetic crack tested. BG- approved. D 2 C B B 2 Finish: RAL 5002 Part.-No. Nominal Size Working Load Limit E D D 2 C B B 2. 0-XL 3-XL F30300 F303200 XL-Spare 6-XL Parts F303300and Accessories 8,800 5,000 22,600.93 0.59.26 0.83.85 2.40 0.75 0.79.06 2.40 2.88 0.9 0.95.89.30 2.96 0.99.85 3. XL-Spare Parts an Accessories Spare Parts are only available as sets! XL-Assembly Set TWN 0945 Consisting of 6 punches in a plastic holder to disassemble chains from components. The complete set covers all nominal sizes for use with the THIELE-Sling-Assembly- System. Part.-No. Z03303 XL-Spare Parts TWN 904/0 for Clevis Type Hooks (Load and Spirol Pin) XL XL-Load-Spirol Pin Set for Clevis Type Hooks 6-XL 8-XL 0-XL 3-XL 6-XL Part.-No. Nominal Size Packing Units. F48686 F48687 F48688 F48689 F48690 0.02 0.02 0.07 0.5 0.24 24 The Name

Spare Parts are only available as sets! XL-Spare Parts TWN 908/0 for Sling Hooks (Safety Latch, spring and Spirol Pin) Part.-No. Nominal Size Packing Units. 6-XL 8-XL 0-XL 3-XL 6-XL F4873 F48733 F48735 F48737 F48739 0.07 0.3 0.24 0.42 0.7 XL-Spare Parts for Sling Hooks ( TWN 835/) Spare Parts TWN 92 for XL-LOK (Load pin and 2 Spirol Pins) (TWN 835/) (TWN 840/) (TWN 84/) Part.-No. Nominal Size Packing Units. 6-XL 8-XL 0-XL 3-XL 6-XL 22-XL F48603 F486043 F486073 F48603 F48633 F4869 0.02 0.04 0.08 0.0 0.26.0 Pin Set for XL-LOK TWN 820 (XL-LOK, TWN 820) Spare Parts TWN 930/0 for C-Shackle, TWN 87 (Bolt, Nut and Cotter Pin) Part.-No. Nominal Size Packing Units. Pin Set for C-Shackle ( TWN 87) 0-XL 3-XL 6-XL F30450 F30460 F30470 0.29 0.55 0.79 (TWN 87) Spare Parts TWN 93/0 for RAPID Shortening Claw, TWN 852 (2 Retainers, 2 Springs and 2 Spirol Pins) 8-XL 0-XL 3-XL 6-XL Part.-No. Nominal Size Packing Units. F347750 F347800 F347850 F347900 0.09 0.22 0.37 0.73 Pin Set for RAPID Shortening Claw (TWN 852) RAPID Shortening Claw (TWN 852) Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 25

Spare Parts TWN 933/0 for Clevis Self Locking Hook, TWN 837 (Load Pin, 2 Spirol Pins) Part.-No. Nominal Size Packing Units. Pin Set for Clevis Self Locking Hook (TWN 837) Self Locking Clevis Hook (TWN 837) 6-XL 8-XL 0-XL 3-XL 6-XL F09200 F0920 F09202 F09203 F09204 0.02 0.04 0.09 0.8 0.35 Trigger Set TWN 935 for Self Locking Hooks (TWN 836 and TWN 837) (Retainer, Spring, Assembly Plastic Bush and Spirol Pin) Trigger Set for Self Locking Hooks (TWN 836 and TWN 837) (TWN 836) (TWN 837) 6-XL 8-XL 0-XL 3-XL 6-XL Part.-No. Nominal Size Packing Units. F092202 F09222 F092222 F092232 F092242 Spare Parts are only available in Sets! 0.04 0.09 0. 0.40 0.42 XL-Chain Gauge TWN 946 for XL-Round Steel Link Chains Part.-No.. Pic.: TWN 946 Front- and Backside 6-XL 8-XL 0-XL 3-XL 6-XL F0690 F069 F0692 F0693 F0694 [ lbs.] 0.22 0.33 0.44 0.55 0.66 Our Performances and Services - Bending and welding up to a diameter of 60 mm - The Forging up to 60 kgs weight - Machining works of complex pieces with modern CNC equipment - Laser cutting up to 20 mm material thickness - Cutting presses for material thickness up to 20 mm - Turning of tooth flanks up to 050 mm and hubs up to a diameter of 500 mm - Heat treatments like hardening, case hardening, nitriding, inductive hardening and tempering - Mounting of slings - Corrosion protective processes like coloring, zinc galvanizing, hot dip galvanizing, chromating - Pull testing up to 500 metric tons - Laboratory research like tensile tests, bending tests, hardness profiles, chemical analysis etc. - Construction and design of new high complex pieces 26 The Name

G r a d e 8 0 / Grade 80 Product Features Working Load Limit in lbs. direct sling KWS Grade 80 Single Sling (lbs.) 90 Angle of Lift Double Sling (lbs.) Triple and Quad Sling (lbs.) 60 Angle 45 Angle 30 Angle 60 Angle 45 Angle 30 Angle Chain Size Chain Size 7-8 20-8 22-8 2 32-8 3 40-8 45-8 50-8 5 63-8 /4 (9/32) /4.42.77.97 2.2 2.50 2,00 3,500 4,500 7,00 2,000 8,00 28,300 34,200 47,700 72,300 88,000 0,200 38,900 76,300 220,400 275,577 3,600 6,00 7,800 2,300 20,800 3,300 49,000 59,200 82,600 25,200 52,400 90,900 240,600 305,400 38,700 477,300 3,000 4,900 6,400 0,000 7,000 25.600 40,000 48,400 67,400 02,200 24,500 55,800 96,400 249,300 3,700 389,700 2,00 3,500 4,500 7,00 2,000 8,00 28,300 34,200 47,700 72,300 88,000 0,200 38,900 76,300 220,400 275,600 5,450 9,00,700 8,400 3,200 47,000 73,500 88,900 23,900 87,800 228,600 286,300 360,900 458,000 572,600 75,900 4,450 7,400 9,500 5,00 25,500 38,400 60,000 72,500 0,200 53,400 86,700 233,800 294,600 375,000 467,500 584,600 3,50 5,200 6,800 0,600 8,000 27,00 42,400 5,300 7,500 08,400 32,000 65,300 208,400 264,500 330,600 43,400 Above working load limits apply only to normal conditions of use in straight configuration and equally loaded legs. For endless slings we recommend a W.L.L. of 75% of the above W.L.L. for the corresponding double leg sling. Design factor 4: Additional nominal sizes are also available in welded finish on request. Additional finishes: Electrogalvanized, hot dipped galvanized and corrotherm coated. Also available priced upon application. Note: German Regulations state that 3 /4 -leg chain slings have the same working load limits. Inclination Angles over 30 are prohibited Never exceed published Working Load Limits.! WARNING! Can fail if damaged, misused or overloaded. Inspect before use. Use only if trained. Observe rated capacity in table, 2, 3. DEATH or INJURY can occur from improper use or maintenance. PROOF TESTED β>30 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 27

G r a d e 8 0 Advice for safe use and maintenance. Using your chain sling. Keep a record of all slings in stock (Record sheets are available at no charge to distributors.) 2. Never lift with knotted or twisted chains. 3. If shortening a chain sling is required, ALWAYS use a shortening hook or claw. 4. ALWAYS pad sharp edges of a lift to protect your chains 5. The load should ALWAYS be secured in the bowl of the hook - NEVER on the tip of the hook. 6 ALWAYS verify that the capacity of the chain sling will accommodate the load considering the possibility of unequal loading and the sling angle. (If in doubt on the angle of lift, consult KWS new pocket capacity card.) 7. The sling master link should be of sufficient width to seat properly in the bowl of the crane hook. 8. Avoid shock loading of chain slings as the result may be the same as overloading. 9. Don t leave slings on the floor. When not in use, hang them on a rack. 0. Make sure the object being lifted is not lagged, clamped or bolted to the floor.. Make sure crane is directly over the load. 2. When lifting a load in confined spaces, attach a rope or Tag line to one or both ends of the load to control rotational movement. 3. Never permit anyone to ride the lifting hook or the load 4. Make sure that all personnel stand clear while the lift is being made. 5. Never work under a suspended load unless the load has been adequately supported from the floor and all conditions have been approved by the supervisor in charge of the operation. Never exceed published Working Load Limits.! WARNING! Can fail if damaged, misused or overloaded. Inspect before use. Use only if trained. Observe rated capacity in table, 2, 3. DEATH or INJURY can occur from improper use or maintenance. PROOF TESTED 28 The Name

G r a d e 8 0 Inspection. Chain slings shall be inspected at least annually and more often depending on the frequency and severity of use. A record MUST be kept of all physical inspections and maintained until the next inspection. 2. Measure the overall reach and compare with the reach shown on the ID tag. Reach = from bearing point of the top master link of the sling to bearing point of the bottom attachment. If the reach has lengthened, Remove the sling from service and determine the cause of the increase. Increase is normally due to overload or wear. 3. Regular wear inspection is required. (KWS wear gauges are available for this purpose.) If extreme wear is found, check the stock diameter to see if the sling should be removed from service. 5. Inspect all sling attachments for gouges, distortion or elongated throat openings. See Chart (page 30) for extreme temperatures and how this affects the working load limit. Grade 80 alloy chain and fittings MUST NOT be used under acidic conditions. Danger Indicators Inspect chain slings link by link. Remove sling from service if you find any of these conditons. 4. Chain links that are bent, have cracks, scratches, corrosion pits, lifted fins, flashing or traverse markings can cause a sling to break or severely reduce the working load limit of the sling. Chain size in inches Removal from Service Never exceed published Working Load Limits.! WARNING! Can fail if damaged, misused or overloaded. Inspect before use. Use only if trained. Observe rated capacity in table, 2, 3. DEATH or INJURY can occur from improper use or maintenance. PROOF TESTED 9/32 /4 3/64 /4 /32 5/32 37/64 23/32 25/32 59/64 /8 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 29

G r a d e 8 0 Product Features Reduced Working Load of Alloy Steel Chains in Service at Extreme Temperature Conditions Temperature of sling Extreme Temperature Effects Reduction in Load Limit* / While Heated Permanent Reduction in Working Load Limit 500 F 600 F 700 F 800 F 900 F *000 F 5% 20% 30% 40% 50% 60% None 5% 0% 5% 20% 25% Grade 80 Round Steel Link Chains TWN0805A according to ASTM 39 p d W W2 Chain dia. Pitch inside width outside width Working Load Limit. [Black Finish] tol.± p tol.± w min. w2 w2 max. [lbs./ft] 7-8 20-8 22-8 2 32-8 3 40-8 45-8 50-8 5 30 63-8 9/32 /4.42.77.97 2.2 2.50 F0453A F0459A F0465A F0470A F0475A F0480A F0495A F0500A F055A F0525A F0530 F0535 F0540 F0546 F0556 F0566 0.24 0.28 0.32 0.39 0.5 0.79 0.87.02.26.42.77.97 2.2 2.50 0.007 0.007 0.0 0.06 0.020 0.024 0.039 0.043 0.05 0.063 0.07 0.079 0.09 0.099 0.0 0.25 0.7 0.86 0.95.8.54.89 2.36 2.60 3.07 3.78 4.26 4.73 5.32 5.9 6.62 7.50 0.020 0.024 0.028 0.035 0.039 0.055 0.07 0.079 0.09 0.4 0.26 0.42 0.62 0.77 0.200 0.250 0.35 0.372 0.426 0.532 0.690 0.847.064.62.379.702.9 2.28 2.403 2.656 2.980 3.438 0.827 0.965.03.379.793 2.230 2.758 3.034 3.585 4.43 4.964 5.56 6.206 6.805 07.72 8.688 0.85 0.993.35.48.844 2.269 2.837 3.20 3.688 4.53 5.22 5.674 6.383 7.092 7.940 9.063 Additional finishes: Electrogalvanized, hot dipped galvanized, corrotherm coated and mangan phosphated. Also available priced upon application. 2,00 3,500 4,500 7,00 2,000 8,00 28,300 34,200 47,700 72,300 88,000 0,200 38,900 76,300 220,400 275,577 0.53 0.73 0.94.46 2.52 3.7 5.95 7.2 0.06 5.20 9.49 24.9 30.57 37.63 48.72 59.82 30 The Name

G r a d e 8 0 -Suspension Components TWN 807A WLL DF= 4: D F B Oblong Master Link Type A for Single Leg Slings 7-8 20-8 22-8 2 32-8 3 40-8 45-8 50-8 5 63-8 7-8 80-8 /4 /8 /4.42.77.97 2.2 2.50 2.80 3.5 F0807A068 F0807A078 F0807A088 F0807A08 F0807A38 F0807A68 F0807A208 F0807A228 F0807A268 F0807A328 F0807368 F0807408 F0807458 F0807508 F0807568 F0807638 F080778 F0807808 2,00 3,500 4,500 7,00 2,000 8,00 28,300 34,200 47,700 72,300 88,000 0,200 38,900 76,300 220,400 275,577 352,640 440,800 0.5 0.7 0.79.02.26.26.57.97 2.2 2.48 2.76 3.5 3.35 3.74 4.33 4.93 3.54 4.33 4.33 5.2 5.5 7.09 9.06 9.06.42 3.39 4.97 6.94 8.52 20.49 20.49 22.85 26.79 28.37.97 2.36 2.36 2.76 3.5 3.94 4.92 4.92 6.30 7.48 8.27 9.46 0.24.43.43 2.6 4.97 5.76 0.64.7.7.75 2.36 5. 9.79 3.67 24.46 35.82 50.69 72,73 96.98 4.06 60.89 220.40 352.64 484.88 TWN 0808A WLL DF= 4: D F B Oblong Master Link for Double Leg Slings 7-8 20-8 22-8 2 32-8 3 40-8 45-8 50-8 5 /4 //4.42.77.97 2.2 F0808A068 F0808A078 F0808A088 F0808A08 F0808A38 F0808A68 F0808A208 F0808A228 F0808A268 F0808A328 F0808368 F0808408 F0808458 F0808508 F0808568 3,600 6,00 7,800 2,300 20,800 3,300 49,000 59,200 82,600 2,5200 52,400 90,870 240,600 305,350 38,700 0.5 0.7 0.67.02.26.77.77 2.20 2.76 2.76 3.5 3.34 3.74 4.53 3.54 4.33 5.2 6.30 7.09 9.06 2.60 2.60 4.95 8.50 8.50 20.49 20.48 22.73 26.77.97 2.36 2.76 3.54 3.94 4.92 6.89 6.89 8.27 0.24 0.24.43.43 2.60 4.96 0.64.8.75 3.24 5. 9.79 27.0 27.0 50. 72.75 97.02 4.0 60.44 220.46 352.74 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 3

G r a d e 8 0 TWN 0809A WLL DF= 4: E D F B D F B Master Link Assembly for 3 and 4-Leg Slings 7-8 20-8 22-8 2 32-8 /4 /4 F0809A068 F0809A078 F0809A088 F0809A08 F0809A38 F0809A68 F0809A208 F0809A228 F0809A268 F0809A328 5,500 9,00,700 8,400 3,200 47,000 73,500 88,900 23,900 87,800 6.70 7.49 7.87 0.44 3.00 6.4 9.69 2.28 24.03 29.6 0.7 0.79.02.26.57.97 2.20 2.48 3.5 4.33 5.2 5.5 7.09 9.06.42 3.39 4.96 6.93 20.47 2.36 2.76 3.5 3.94 4.92 6.30 7.48 8.27 9.45.42 0.39 0.5 0.5 0.7 0.87.02.42.42.57.97.8 2.36 2.36 3.35 3.94 4.72 6.30 6.30 7.09 8.66 0.9.8.8.57.97 2.36 3.5 3.5 3.54 4.33 2.07 2.45 3.47 8.38 6.98 28.46 55.2 6.73 08.09 89.60 TWN 0796 WLL DF= 4: Master Link Assembly for 3 and 4-Leg Wire Rope EN 344- F079606 F079608 F0796022 F0796026 F0796032 F0796036 F0796045 F0796050 F0796056 F0796063 F0796085 6,7 8,86,69 6,530 24,464 35,264 46,284 69,646 88,600 0,420 224,367 *according to DIN EN 344- for leg slings E D F B D F B 7.88 4.33 2.36 0.5 3.55.97 9.46 0.75 5.2 2.76 4.33 2.36.43 0.87 6.30 3.55 0.7 5.2 2.76 3.40.00 7.09 3.94 0.87 6.30 3.55 6.5.26 9.06 4.93.00 7.09 3.94 8.9.42 9.85 5.52.26 9.06 4.93 22.46.77 2.6 6.90.42 9.85 5.52 26.00.97 3.40 7.49.77 2.6 6.90 28.37 2.2 4.97 8.27.97 3.40 7.49 3.9 2.48 6.94 9.46 2.2 4.97 8.27 40.98 3.35 20.49.42 3.5 20.49.43 2.64 4.9 6.83.90 20.06 33.28 55.0 92.57 25,63 74.2 445.2 Categorization of the wire rope diameter* Fiber Rope 0.43 0.5 0.7 0.87.00.0.42.73 2.36 Steel Rope 0.39 0.47 0.55 0.79 0.95.0.42.73 2.36 TWN 080/ WLL DF= 4: E D F B 22-8 9/32 F3770 F3780 F3790 F3800 F380 F3830 2,00 3,500 4,500 7,00 2,000 34,200 5.55 5.79 7.3 8.62 0.04 4.8 5.2 6.30 7.09 8.67 0.29 4.80 4.33 4.33 5.3 6.30 7.09 0.24 2.36 2.36 2.95 3.54 3.94 5.5.32 2.20 3.3 5.07 8.7 23.4 Fixed Size Master Link Assembly Type TAA 32 The Name

G r a d e 8 0 TWN 080/2 WLL SF= 4: E D F B 22-8 9/32 F3772 F3782 F3792 F3802 F382 F3832 3,600 7,800 2,300 20,800 3,300 59,200 5.55 6.77 8. 9.4 0.83 7.33 0.5 0.70 0.86.02.26.77 4.33 5.3 6.30 7.09 7.88 3.39 2.36 2.95 3.44 3.94 4.33 7.09.23 2.64 5.07 9.04 5.87 44.08 Fixed Size Master Link Assembly Type TAA 2 TWN 080/4 WLL DF= 4: E D F B D 22-8 9/32 F3776 F3786 F3796 F3806 F386 F3836 5,450,700 8,400 3,200 47,000 88,900 8.66 0.52 2.25 4.73 8.7 24.42 0.70 0.86.02.26.4.97 5.3 6.30 7.09 7.88 0.24 3.79 2.95 3.54 3.94 4.33 5.5 7.48 0.5 0.70 0.86.02.4 3.53 6.6.02 2.6 35.26 88.6 Fixed Size Master Link Assembly Type TAA 4 TWN 085 DIN- Crane Hook No. WLL DF= 4: E D F B D F B Oversize master link assy for single leg slings suitable for crane hooks DIN 540 (6 to, 25 to, 40 to) 20-8 20-8 22-8 22-8 6 25 40 6 25 40 6 25 40 6 25 40 6 25 40 25 40 25 40 F085066 F0850625 F0850640 F085086 F0850825 F0850840 F08506 F085025 F085040 F08536 F085325 F085340 F08566 F085625 F085640 F0852025 F0852040 F0852225 F0852240 2,00 2,00 2,00 4,500 4,500 4,500 7,00 7,00 7,00 2,000 2.000 2,000 8,00 8,00 8,00 28,300 28,300 34,200 34,200 2.37 5.52 9.07 3.00 5.52 9.07 3.00 6.5 9.70 6.5 9.70 6.75 20.29 0.7 0.79 0.87 0.87 0.79 0.87 0.87 0.95.00.00.0.8.8.26.34.65.65 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 3.40 6.94 3.40 6.94 5.5 7.09 8.67 5.5 7.09 8.67 5.5 7.09 8.67 5.5 7.09 8.67 5.5 7.09 8.67 7.09 8.67 7.09 8.67 0.5 0.5 0.5 0.5 0.5 0.79 0.79 2.3 2.3 2.3 2.76 2.3 2.3 2.76 2.76 2.76 2.76 2.76 3.35 3.35 0.99 0.99 0.99.34 0.99 0.99.34.34.34.34.34 3.64 5.55 8.5 5.7 5.55 8.5 5.7 8.3.75 6.39.7 5.54 9.48 5.23 2.62 2.97 29.80 2.97 29.80 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 33

G r a d e 8 0 TWN 086 Part- No. DIN- Crane Hook No. WLL 60 Angle E D F B D F B Oversize master link assy for double leg slings suitable for crane hooks DIN 540 (6 to, 25 to, 40 to) 20-8 22-8 F086066 F0860625 F0860640 F086086 F0860825 F0860840 F08606 F086025 F086040 F08636 F086325 F086340 F08666 F086625 F086640 F0862025 F0862240 6 25 40 6 25 40 6 25 40 6 25 40 6 25 40 25 40 3,600 3,600 3,600 7,800 7,800 7,800 2,300 2,300 2,300 20,800 20,800 20,800 3,300 3,300 3,300 49,500 59,200 2.37 5.57 9.70 3.00 6.5 9.70 3.00 6.5 9.70 3.59 6.75 20.29 5.76 7.93 2.47 9.30 22.46 0.7 0.87.00 0.87 0.95.00.00.0.8.8.26.34.42.65.77.89 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 3.40 6.94 5.5 7.09 8.67 5.5 7.09 8.67 5.5 7.09 8.67 5.5 7.09 8.67 5.5 7.09 8.67 7.09 8.67 0.5 0.5 0.79 0.79 0.79.00 0.87 0.87.26.00 2.3 2.3 2.76 2.76 2.76 2.76 2.76 2.76 2.76 3.35 3.35 3.35 5.52 4.53 4.53 5.9 5.52 0.99 0.99.34.34.34.34.34.34.34 2.56.97.97 2.76 2.56 4.03 5.95 2.54 6.50 9.0 2.54 8.57.97 6.33 2.47 6.73 23.2 22.00 26.65 34.47 4.70 47.54 TWN 087 Part- No. DIN- Crane Hook No. WLL 60 Angle E D F B D F B Oversize master link assy for 3 and 4-leg slings suitable for crane hooks DIN 540 (6 to, 25 to, 40 to) 20-8 22-8 F087066 F0870625 F0870640 F087086 F0870825 F0870840 F08706 F087025 F087040 F08736 F087325 F087340 F08766 F087625 F087640 F0872040 F0872240 6 25 40 6 25 40 6 25 40 6 25 40 6 25 40 40 40 5,450 5,450 5,450,700,700,700 8,400 8,400 8,400 3,200 3,200 3,200 47,000 47,000 47,000 73,500 88,900 3.00 6.5 9.70 3.00 6.5 9.70 3.59 6.75 20.29 5.76 7.93 2.47 5.76 8.9 22.46 23.64 23.64 0.87 0.95.00.00.0.8.8.26.34.42.65.42.53.65 2.7 2.7 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 0.24 3.40 6.94 6.94 6.94 5.52 7.09 8.67 5.52 7.09 8.67 5.52 7.09 8.67 5.52 7.09 8.67 5.52 7.09 8.67 8.67 8.67 0.79 0.79 0.79.00 0.87 0.87.00.00.00.42.42 2.76 2.76 2.76 2.76 2.76 2.76 3.35 3.35 3.35 5.52 4.53 4.53 5.52 5.52 5.52 6.70 6.70.34.34.34.34.34.34 2.56.97.97 2.56 2.56 2.56 2.96 2.96 6.50 9.0 2.54 8.57.97 6.33 2.47 6.73 23.2 22.90 26.65 34.47 22.00 30.00 37.82 7.8 7.8 TWN 0820 WLL E F B 9-8 F3000 F300 F3020 F3030 Z05828 4,500 7,00 2,000 8,00 34,200 3.68 4.96 6.24 7.3 0.28 2.68 3.74 4.73 5.52 8.00.50.93 2.36 3.5 3.86 0.79.90 3.53 6.6 2.30 Clevis Master Link 34 The Name

G r a d e 8 0 Connecting Links TWN 320 WLL E G A C F -8 /4 / F30806 F3086 F30826 F30836 F30846 2,00 4,500 7,00 2,000 8,00.8 2.2 2.72 3.3.02 0.59 0.79 0.98.8.38 2.44 3.07 3.66 4.57 5.75.65 2.3 2.68 2.95 3.50 0.24 0.34 0.45 0.59 0.75 0.5 0.35 0.66.32 2.65 THI-LOK (new design) KWS WLL -8 /4 / Z07400 Z0740 Z07402 Z07403 Z07404 2,00 4,500 7,00 2,000 8,00 E G A C F.73 2.2 2.68 3.39 4.45 0.55 0.75 0.95.02.42 2.36 2.99 3.66 4.65 6.5.62 2.05 2.68 3.03 3.86 0.32 0.39 0.49 0.85 0.5 0.35 0.7.45 2.9 KWS-Connector TWN 0829 WLL E G A C F 20-8 22-8 2 32-8 /4 F30855 F30860A F30870A F30880 28,300 34,200 47,700 72,300 5.3 5.7 6.5 7.6.8.8 2.2 2.6 7.3 7.8 8.9 0.6 4.8 5.2 6. 7.6.02.02.8.46 5.20 7.00.00 20.60 THI-LOK -Hooks TWN 0798 WLL E D G H C 8/20-8* 22-8* /4 Z07274 Z07275 Z07276 Z07277 Z07278 Z03344 Z03329 2,00 3,500 7,00 2,000 8,00 28,300 34.200 4.33 5.28 6.58 7.84 9.97 0.84 2.48 0.95.8.42.85 2.36 2.60 2.80.0.38.77 2.3 2.64 3.07 3.70 0.9.0.34.69.97 2.09 2.84 0.55 0.79.02.34.38.8 2.28.0.76 3.3 7.6 3.00 7.9 33.07 Self-Locking Eye Hook Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 35

G r a d e 8 0 TWN 0799 WLL E G H C 8/20-8 /4 Z07279 Z07280 Z0728 Z07282 Z07296 Z00503 2,00 3,500 7,00 2,000 8,00 28,300 3.86 4.8 5.9 7.33 8.4 9.38.0.30.77 2.3 2.64 3.07 0.87 0.99.38.62 2.3 2.3 0.59 0.79.06.30.54.89.26 2.05 3.86 7.6 3.66 7.63 Self-locking Clevis Hook TWN 340/ WLL E G H C /4 F33600 F3360 F33620 F33630 F33640 2,00 3,500 7,00 2,000 8,00 2.96 3.90 4.77 5.63 6.90 0.9.8.50.73 2.3 0.67 0.87.4.46.77 0.87.0.42.69 0.66.50 3.02 5.69 9.6 Clevis Sling Hook with Latch TWN 835/ WLL E G H C 8/20-8 22-8 F33656 F3366 28,300 34,200 8.67 9.6 2.56 2.96 2.29 2.52 2.7 2.40 2.33 23.4 Clevis Sling Hook with Latch 36 The Name

G r a d e 8 0 TWN 0854 WLL E G H C F B /4 F3200 F320 F3220 F3230 F3240 2,00 3,500 7,00 2,000 8,00 4.45 6. 6.38 7.49 9.73 0.7 0.83 0.9.26 0.79 0.99.8.30.69 0.55 0.75 0.83.0.38 0.99.65.65.69 2.40.8.73.73 2.0 2.52 0.84 2.20 2.64 4.58 9.8 Swivel Hook with Latch TWN 0858/A Part -No. WLL E D D2 G H C 8/20-8 22-8 2 32-8 /4 /4 F3290 F329 F3292 F3293 F3294 F3295 F3297 F3298 F3299 2,00 3,500 7,00 2,000 8,00 28,300 34,200 47,700 72,300 3.59 4.73 5.99 7.09 8.7 0.64.82 3.20 6.5 0.83.0.42.65 2.3 2.44 2.76 3.07 3.78 0.43 0.55 0.7 0.83.06.8.26.54.89 0.9.8.50.65 2.05 2.56 2.96 3.07 3.74 0.67 0.95.4.62.77 2.29 2.52 2.76 3.27 0.87.0.42.69 2.7 2.40 2.68 3.5 0.68.76 3.75 6.7.24 9.7 25.35 37.9 66.56 Large Eye Hookwith Latch TWN 0855/ WLL E D G H C 3 40-8 45-8 50-8.42.77.97 Z0659 Z0660 Z066 Z0662 88,000 0,200 38,900 76,300 5.28 7.44 9.46 24.03 2.84 3.3 3.55 4.02 4.29 4.89 5.44 6. 4.06 4.57 5.2 5.7 3.07 3.5 3.90 4.33 7.9 03.59 4.94 80.5 Eye Hook with Latch Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 37

G r a d e 8 0 TWN 0856 WLL E D G H C 8/20-8 22-8 2 32-8 /4 /4 Z00456 F32360 F32370 F32380 F32390 F32400 Z00457 Z00458 Z00459 2,00 3,500 7,00 2,000 8,00 28,300 34,200 47,700 72,300 3.74 4.93 5.75 6.90 8.08 9.26 0.44 2.02 2.88 0.5 0.7 0.79.02.26.85 2.05 2.36.97 2.60 2.99 3.5 4.02 4.49 5.00 5.36 5.99 0.95.30.38.62.89 2.3 2.76 3.5 3.66 0.79.06.26.50.77 2.0 2.56 2.84 3.27.7 2.05 3.66 6.94.92 6.53 25.3 47.6 6.7 Eye Foundry Hook TWN 0856H WLL E D G H C 8/20-8 F32393 F32403 8,00 28,300 8.08 9.24.26 4.02 4.49.89 2.3.77 2.0 2.35 7.6 Eye Foundry Hook with handle TWN 0859 WLL E G H C 20-8 22-8 /4 F3330 F33320 F33330 F33340 F33655 F33660 3,500 7,00 2,000 8,00 28,300 34,200 4.33 5.24 6.26 7.45 8.59 9.6 2.60 2.99 3.5 4.02 4.49 4.89.30.38.62.89 2.3 2.36.06.26.50.77 2.0 2.2 2.20 3.55 7.49 2.2 9.84 26.45 Clevis Foundry Hook 38 The Name

G r a d e 8 0 TWN 0850/ WLL yellow metric tonnes B E F G H J K S GH GH3 GH5 GH8 GH0 Z0727 Z05449 Z05836 Z05630 Z05837.2 3.00 5.00 8.00 0.00.02.4.34.38 3.07 3.35 4.6 6.34 6.54 7.72 3.03 4.74 5.4 5.32 7.09 0.95.42.85.85 2.60 0.95.22.77 2.85 2.94 0.95.42.73 2.05.8 3.90 5.6 6.82 7.0 9.02 0.39 0.95.74.54.50 2.45 5.40 7.35 3.30 Excavator Hook with forged Safety Latch ) W.L.L. values as per standard EN 677-. Test requirements according to test principle of Excavator Hooks for earthmoving equipment at lifting application (GS-MO 5-03) of the safety association. NOTE: The component must approve a strength introduction at the chosen place! Welding works are to be carried out in accordance with the delivered welding instructions! Further operating instruction and the standard DIN 5429 is to be considered! OCTA-STAR Wire [Ø inch] Inside length [E/inch] Lashing Capacity [da N] weight Z08385 up to 3.5 4,000.30 23 E OCTA STAR Clevis Choker Hook Only for tensioning purposes OCTA-STAR D / E Wire [Ø inch] / B / A Inside length [E/inch] Lashing Capacity [da N] weight [lps.] B A Z08388 0.45 /.32 / / 2.95 4,000.2 E D E OCTA STAR Cable Sliding Bow for Chains and Wire Rope Only for tensioning purposes OCTA-STAR Wire Diameter Lashing Capacity WLL 9-3 4-6 0.35-0.5 0.55- Z08386 Z08387 7,052 8,86 3,800 5,800.97 2.50 B L E 5.20 5.95 3.5 3.74.56 2.89 OCTA STAR Wire gliding Hook with Safety Snapper Only for tensioning purposes Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 39

G r a d e 8 0 -Shortening Components TWN 0827 WLL E G L B 20-8 /4 F33200 F3320 F33220 F33230 F33245 3,500 7,00 2,000 8,00 28,300 2.40 2.88 3.74 4.4 5.83 0.35 0.47 0.59 0.7 0.89 3.98 4.93 6.30 7.4 9.53 2.40 2.96 3.74 4.73 5.56.7 2.5 4.80 7.49 6.09 Clevis Grab Hook TWN 0827/ WLL E G L B 20-8 /4 F3320 F332 F3322 F3323 F33246 3,500 7,00 2,000 8,00 28,300 2.40 2.88 3.74 4.4 5.83 0.35 0.47 0.59 0.7 0.89 3.98 4.93 6.30 7.4 9.53 2.40 2.96 3.74 4.73 5.56.9 2.8 4.80 7.60 6.20 Lockable Grab Hook OCTA-STAR WLL E G L B G E L -8 /4 Z09305 Z09306 Z09307 Z09308 3,500 7,00 2,000 8,00 2.69 3.4 4.20 4.85 0.4 0.5 0.59 0.7 4.09 5.26 6.48 7.40 2.40 3.09 3.87 4.76.9 2.8 4.8 7.6 B OCTA STAR Grab Hook with Pin OCTA-STAR WLL E E -8 /4 Z069 Z0692 Z0693 Z0694 3,500 7,00 2,000 8,00 2.05 2.88 3.47 3.90 0.88.54 2.87 5.95 OCTA STAR Clevis Grab Hook (Small) 40 The Name

E G r a d e 8 0 OCTA-STAR WLL E -8 /4 Z0800 Z080 Z0802 Z0803 3,500 7,00 2,000 8,00 2.3 3. 3.90 4.8 0.68.43 3.09 5.5 OCTA STAR Eye Grab Hook TWN 085 WLL E L M 7-8 20-8 22-8 2 32-8 /4 5/ /4 F3490 F34920 F34925 F34930 F34940 F34950 F34970 F34980 F34985 F34990 2,00 3,500 4,500 7,00 2,000 8,00 28,300 34,200 47,700 72,300 2.3 2.92 3.5 3.55 4.6 5.67 6.23 7.80 7.68 9.46 3.9 4.26 4.53 5.28 6.90 8.43 9.50.62 2.7 5.0.26.69.8 2.2 2.84 3.39 3.86 4.65 5.2 6.30 0.46 0.93.23 2.07 4.63 7.87.90 9.84 26.45 4.88 Clevis Shortening Claw -Shackles TWN 086 WLL E D C F B B2 F3060 F306 F3062 7,00 2,000 8,00 2.52 3.25 3.90 0.79 0.95.26.89.42.93 2.2 0.83.06.30.85 2.40 2.96.34 2.73 4.63 Clevis Chain Coupling Shackle Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 4

G r a d e 8 0 TWN 0862 WLL E D C F B B2 F30600 F3060 F30620 7,00 2,000 8,00 2.52 3.25 3.90 0.79 0.95.26.89.42.93 2.2 0.83.06.30.85 2.40 2.96.48 3.02 5.03 Clevis Chain Coupling Bolt Shackle TWN 0870 WLL E D D2 C B B2 Special Shackle 8/20-8 22-8 2 2 32-8 3 40-8 45-8 /8 /4.42.77 F303 F3032 F3033 F3034 F3035 F3036 F3037 F3038 F3039 F3040 F304 7,00 2,000 8,00 28,300 34,200 47,700 56,000 72,300 88,000 0,200 38,900.93 2.40 2.88 3.59 4.37 4.73 5.52 5.79 6.23 7.29 8.3 0.59 0.75 0.9.4.30.46.62.7.97 2.7 2.40 0.79 0.95.8.42.54.77.89 2.05 2.36 2.68.26.89 2.36 2.84 3.07 3.55 3.78 4.0 4.73 5.36 0.83.06.30.65.85 2.09 2.36 2.60 2.88 3.9 3.55.85 2.40 2.96 3.78 4.22 4.7 5.36 5.9 6.58 7.29 8.2 0.77.63 2.87 5.73 8.82 2.56 22.04 23.4 30.64 45.8 58.63 TWN 087 WLL E D D2 C B B2 Bolt Shackle Type C 8/20-8 22-8 2 2 32-8 3 40-8 45-8 /8 /4.42.77 Z0447 Z0445 F3030 F30320 F30330 F30340 F30350 F30360 F30370 F30380 F30390 F30400 F3040 2,00 4,500 7,00 2,000 8,00 28,300 34,200 47,700 56,000 72,300 88,000 0,200 38,900.8.42.93 2.40 2.88 3.59 4.37 4.73 5.52 5.79 6.23 7.29 8.3 0.32 0.39 0.59 0.75 0.9.4.30.46.62.77.97 2.7 2.40 0.39 0.47 0.79 0.95.8.42.54.77.89 2.05 2.36 2.68 0.79 0.95.26.89 2.36 2.84 3.07 3.55 3.78 4.0 4.73 5.36 0.55 0.67 0.83.06.30.65.85 2.09 2.36 2.60 2.88 3.9 3.55.8.46.85 2.40 2.96 3.78 4.22 4.77 5.36 5.9 6.58 7.29 8.2 0.22 0.44 0.99.85 3.09 6.83 9.92 3.89 22.26 27. 34.38 48.93 57.97 42 The Name

G r a d e 8 0 -Magnet Chain Slings WLL Reach End Link Master Link E D2 F2 B2 D F B 20-8 22-8 2 32-8 /4 F08945-7 F08946-7 F08947-7 F08948-7 F0896-7 47,000 73,500 88,900 23,900 87,800 38.20 4.20 4.06 46.52 53.00 0.79 0.87.02.26 5.52 5.52 5.52 6.50 6.70.97.97 2.56 2.76 3.5.77 2.0 2.25 2.25 2.48 0.24 0.24.82.82 3.00 6. 6. 6.50 6.50 7.09 62 85 05 49 202 -Tensioning- and Lashing Chains Lashing chain (according to DIN EN 295-3) TWN 400 Standard length L = 3,500 mm/0 ft with extended tensioner and unshortend chain. All lengths available upon request. The adjustment will be reached by the shortening device and the tensioner. WLL Article-No. Admissible tensile strength under straight load 5,600 8,800 4,800 22,500 F347 F3472 F3473 F3474 [kn] 40 63 00 60 8.73 27.55 46.28 83.09 Lashing chain with ratchet (according to DIN EN 295-3) TWN 40 Standard length L = 3,500 mm/0 ft, with extended tensioner and unshortend chain. All lengths available upon request. The adjustment will be reached by the shortening device and the ratchet tensioner. WLL Article-No. Admissible tensile strength under straight load 5,600 8,800 4,800 F347R F3472R F3473R [kn] 40 63 00 8.73 27.55 46.28 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 43

G r a d e 8 0 -Spare Parts and Accessories -Stainless Steel Chain ID Tag Tag for Single and Multi Leg Sling Chain -Assembly Set TWN 0945 Consisting of 6 punches in a plastic holder to disassemble chains from components. The complete set covers all nominal sizes for the use with the THIELE-Sling-Assembly-System. Z03303 -Chain Gauge Set TWN 0946 For regular wear inspection of chain sizes to 32-8 on site. F48856 TWN 0904/0 Article-No. Packing Units 20-8 22-8 F48694 F48352 F48355 F48358 F4836 F48369 F48367 0.02 0.02 0.07 0.5 0.24 0.57 0.68 Load -Spirol Pin Set for Clevis Type Hooks TWN 0905 / 0906 Packing Units 20-8 22-8 2 32-8 3 40-8 /4.42 F48036 F48039 F48042 F48045 F48048 F4805 F48057 F48060 F48063 0.5 0.3 0.55.72 2.3 3.53 4.45 5.73 8.57 44 The Name

G r a d e 8 0 TWN 0920-0922 Packing Units TWN 0853 TWN 0854 TWN 0855 20-8 22-8 2 32-8 3 40-8 45-8 50-8 /4.42.77.97 F48420 F48423 F48426 F48429 F48432 F48435 F48476 F48420 F48423 F48426 F48429 F48469 F48460 F48463 F48466 F48469 F48472 F48475 F48476 F48478 Z0663 Z0664 Z0665 Z0666 0.04 0.07 0.09 0.24 0.4 0.46 0.53 0.53 0.57.76 2.20 3.09 4.9 TWN 920 Packing Units 7-8 9/32 F4860 F48602 F4850 F48604 F48607 F4860 F4863 0.02 0.02 0.02 0.04 0.5 0.30 0.42 TWN 0929/0 Packing Units 20-8 22-8 2 32-8 /4 F4867 F4869 F48622 F48625 0.68 0.7.7 2.09 www.kwschain.com 45

G r a d e 8 0 TWN 0930-0932 Packing Units 20-8 22-8 2 2 32-8 3 40-8 45-8 /8 /4.42.77 F3045 F3046 F3047 F3048 F3049 F3050 F305 F3052 F3053 F3054 F3055 0.29 0.55 0.79 2.4 2.89 4.39 6.37 8.3 9.87 4.66 8.07 TWN 0950-0952 Packing Units 20-8 F48330 F48328 F48329 F48339 F48345 0.02 0.04 0.07 0. 0.22 TWN 0967/0 Packing Units 20-8 F333700 F3337 F33372 F333730 F33374 Z0348* 0.02 0.04 0.07 0.4 0.37 0.47 *TWN 0837 46 The Name

G r a d e 8 0 TWN 0967/ Packing Units 20-8 22-8 F329090 F32990 F329290 F329390 F329490 Z0345* Z03452* 0.05 0.06 0.08 0.3 0.24 0.58 0.74 *TWN 0836/0837 TWN 908/5 * TWN 0908/0 20-8 22-8* 2 32-8 /4 Packing Units F48730 F48732 F48734 F48736 F48738 F48742 F48744 F48746 F48747 0.04 0.07 0.29 0.57.65 2.45 3.7 5.36 (TWN 340/) Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 47

G r a d e 8 0 Chain and Wire Rope Cutter TWN 094 Function and Design The THIELE Chain and Wire Rope Cutting Machine is a mobile unit, which allows easy cutting-mounting and servicing of chain and wire rope slings. The THIELE Chain and Wire Rope Cutting Machine can be moved easily and safely due to light steerable wheels and in accordance with the latest Accident Prevention regulations. The compact hydraulic unit is controlled by a foot pedal, allowing the cutting of chain or wire rope with fast interchangeable blades. The cutting machine has a lockable tool compartment, holding clamp and a large work top. Drive: : Voltage: : (Approx.) L x W x H: Working Height: :: Electro-Hydraulic with 700 kn Shearing Force F48950 220/380 V 3 Ph. 50 Hz, 220 V Ph. 50 Hz od. 440 V 3 Ph. 60 Hz, Export 47.28 x 2 x 5.22 inches 200 x 700 x 300 mm (with protection cover) 900 mm / 35.46 inches 270 kg / 595 lbs. Cutting Range Chains according to DIN 5684, 5687 Grade 80 / 00 and DIN 22 252 up to 26 mm diameter, wire rope up to 30 mm diameter and with 600 N/mm 2 - higher strengths and larger diameters upon request. Accessories. set of tools: for changing the blades 2. sets of blades: one for chains and one for wire rope 3. Holding Clamp: The holding clamp keeps the chain and wire rope at a right angle to the cutting position.the holding clamp prevents the chain and wire rope from falling onto the ground after it has been cut for a safer more effective operation. 4. Stroke Adjustment: With the stroke adjustment the cutting stroke may be adjusted from 0 mm to 50 mm. 48 The Name

G r a d e 8 0 -Slings -THIELE key design for standard chain slings (mounted) ) -THIELE key design for endless chains Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 49

G r a d e 8 0 Marine- and Offshore Industry In the marine and Offshore industry Sling Chains are exposed to rough environmental conditions under strong dynamic loads. For this special application THIELE, as authorized and certified manufacturer, supplies special calibrated welded Sling Chains as per D.N.V. 2.7-. Güteklasse 8 / Grade 80 G üteklasse 8 / Grade 80 GK by K8 THIELE DNV 2.7- Type Approved Fittings for Offshore Container Lifting DNV 2.7- Welded type lifting sets for Offshore Containers Offshore Quad Assemblies for Wire Rope Sling New Working Load Limit [t] = 0-45 SF= :4 [in.] D D E F B F B app. TWN 0797 S-7304 S-7275 2-leg chain sling for 2x2 use (4-leg chain) 4-leg chain sling 4-leg chain sling with forerunner F7097268 F7097238 F7097368 F0797458 F0797508 F0797568 F0797638 7.90.30 6.00 22.60 26.80 40.00 50.00.02.87 3.39 7.09 3.94 6.30 3.54.26.02 6.4 9.06 4.92 7.09 3.94.42.26 8.90 9.84 5.5 9.06 4.92.77.42 22.44 2.60 6.89 9.84 5.5.97.77 25.98 3.39 7.48 2.60 6.89 2.20.97 28.35 4.96 8.27 3.39 7.48 2.48 2.20 3.89 6.93 9.48 4.96 8.27.68 9.84 33.07 53.79 88.9 2.25 74.7 Offshore Master Link Assembly for 3 and 4 Leg Wire Rope Offshore Master Links A-Type New Welded type lifting sets for Offshore Containers with a max. rating of 25,000 kg available upon request. F0803208 F0803228 F0803628 F0803238 F0803368 F0803408 F0803548 F0803058 F0803658 F0803368 F0803078 F0803088 Working Load Limit [t] 4.75 5.60 8.00 2.50 6.00 9.00 25.00 3.50 40.00 50.00 63.00 80.00 [in.] D F B.79 5.5 3.5.87 6.39 3.54.02 7.09 3.94.24 9.06 4.92.42 9.84 5.57.57.42 6.30.77 2.40 6.89.97 3.39 7.48 2.20 4.96 8.27 2.48 6.93 9.45 2.74 8.50 0.24 3.5 20.47.42 app. 2.43 3.3 5.07 9.70 3.67 9.40 24.46 35.27 50.7 72.75 97.00 4.0 TWN 0803 S-7303 Offshore Oblong Master Link Type A Offshore Shackles New F3030NV F30320NV F30330NV F30340NV F30350NV F30360NV F30370NV F30380NV F30390NV F30400NV F3040NV Nominal Size [in.] /8 /4.42.77 Nominal Size [DIN 820].6 2.5 4 5 6 8 0 2 6 20 Working Load Limit [in.] app. [t] D D 2 E C B B 2 3.5.59.63.93.26.83.85 0.77 5.30.75.79 2.40.06 2.40.63 8.00.9.95 2.88.89.30 2.96 2.87 2.50.4.8 3.59 2.36.65 3.78 5.73 5.00.30.42 4.37 2.84.85 4.22 8.82 2.20.46.54 4.73 3.07 2.09 4.7 2.56 25.00.62.77 5.52 3.55 2.36 5.35 22.04 3.50.7.89 5.79 3.78 2.60 5.9 23.4 40.00.97 2.05 6.23 4.0 2.88 6.58 30.64 50.00 2.7 2.36 7.29 4.73 3.9 7.29 45.8 63.00 2.40 2.68 8.3 5.36 3.55 8.2 58.63 TWN 087 S-7302 Bolt Shackle C The Name www.kwschain.com Toll Free 800-872-933 Fax 98-665-48 E-mail sales@kwschain.com 50 The Name

TLP Hoist Rings Hoist Rings TWN 09A WLL E F C L H D B 22-8 32-8 40-8 /4 /4 F3503A- F353A-2 F3523A-3 F3533A-5 F3543A-8 F3563A-5 F3583A-32 F3593A-50 2,00 3,500 7,00 2,000 8,00 34,200 72,300 2,000 2.32 2.72 3.3 4.73 5.00 7.0.50 4.62.22.46.8 2.72 2.60 3.86 6.86 8.98.26.50.77 2.36 2.68 3.78 5.7 7.33.26.50.73 2.36 2.56 4.29 6.50 8.27.0.30.50 2.0 2.40 3.5 4.65 5.7 0.47 0.55 0.7 0.95.0.54 2.2 2.84.42.65.89 2.60 2.84 4.73 7.09 9.06 0.53.0.39 4.9 5.88 7.83 60.7 32.24 Hoist Ring weld-on type TWN 02/ WLL M Metric Screw Size E F A C H B D M6 M20 M24 M30 /4 F35000 F3500 F35020 F35030 2,00 3,500 7,00 2,000 2.56 3.35 3.86 4.73.8.77 2.09 2.40 3. 3.62 4.45 2.56 3.23 3.98 4.93.50.93 2.32 2.84.87.0.30.77.47.59.75.99.54 3.3 5.73 0.4 TLP Hoist Rings M Hoist Ring swivel type, bolted base TWN 022 WLL M Metric Screw Size E F A C L D B M6 M20 M30 M36 M42 M45 M56 M56 22-8 2 2 32-8 34-8 /8 /4.34 F35070 F35075 F35080 F35095 F35098 F350 F3502 F35285 7,00 2,000 8,00 34,200 47,700 56,000 72,300 80,640 4.4 5.87 7.2 8.90 0.72 0.72 3.24 3.24 2.25 3. 3.66 4.49 5.59 5.59 7.60 7.60 3.55 4.53 5.9 6.90 7.88 7.88 9.06 9.06.50.89 2.94 2.84 3.55 3.55 3.94 3.94 5.2 6.50 8.35 0.05.62.62 3.00 3.00 0.7 0.87.02.42.77.77.89.89.97 2.56 2.96 3.74 3.74 4.33 4.33 3.39 6.24 2.94 24.68 42.54 44.52 69.87 69.87 M Hoist Ring bolted type Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 5

TLP Hoist Rings TWN 023 Part- No. WLL M Metric Screw Size E F D T B L SW A M6 M20 M24 /4 F340 F3420 F3430 2,00 3,500 7,00 4.45 4.45 5.04 2.05 2.05 2.64.63.63.7 2.76 2.76 3.35.34.34.8.50.38.8.8.8 2.36 2.36 2.36.6 2.09 2.29 Hoist Ring Threaded Eye Bolt Type TWN 024A WLL E F C L H D B /4 F3507A F350A F3524A F3539A F3544A 2,00 3,500 7,00 2,000 8,00 2.2 2.64 3.9 4.6 4.8.8.46.77 2.72 2.64.26.50.77 2.36 2.68.26.50.73 2.36 2.56.0.30.50 2.0 2.40 0.47 0.55 0.7 0.95.0.42.65.89 2.60 2.84 0.55 0.95.59 4.9 6.7 Hoist Ring weld-on type with fixing spring TWN 027 WLL D B M Metric Screw Size M20 M24 F3557 F3558 7,00 2,000 E F A C L D B 2.68 4.45.89 2.72 3.55 4.33.73 2.36 5.2 6.30 0.7 0.95.89 2.60 2.42 5.95 E F A C GM L 52Hoist-Ring The Name MDB screwed type with screws 52 The Name

TLP Hoist Rings The TITAN Hoist Ring TWN 20 is capable of lifting with the working load limit in all directions. The coupling link is freely moveable in all directions. It rotates easily due to the special bushing and glide plate made from stainless steel. Built as a compact one piece unit, it requires less space for assembly. The TITAN Hoist Ring allows fast and easy assembling with common tools and can be supplied with other screw lengths upon request. A plastic net cover protects the screw during shipment and storage. 00 % Magnetic crack tested. BG - approved. Warning: Does not swivel under load. Hoist Ring rotates 360 and 80 end to end. Finish: RAL 5002 Screw Size d Part.-No. Working Load Limit Thread Length G E F D T B A C H SW. [ lbs.] TLP Hoist Rings M8 M0 M2 M6 M20 M24 M30 M36 F34405 F34390 F34395 F34400 F3440 F34420 F34430 F34440 784,008,344 3,36 5,600 7,840 5,008 7,920 0.73 0.73 0.93.0.26.97 2.60 3.74 0.39.97.0.69.97 2.3 0.5 3.74 0.39.97.0.69.97 2.3 3.74 0.39.97.0.69.97 2.3 0.7 3.74 0.39.97.0.69.97 2.3 0.95 4.49.89 0.47 2.36.34 2.3 2.36 2.56.8 5.32 2.7 2.76 2.56 2.92 3..42 6.54 2.60 0.7 3.35.97 3.5 3.66 3.98.8 8.35 3.62 0.87 4.53.97 3.78 4.22 4.73 2.7 0.88 0.88 0.95.04.74 3.3 5.95 0.58 The right turn! 00 % 00 % 00 % Working Load 00 % in all directions! 00 % 00 % Working Load Limit in all directions! Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 53

TLP Hoist Rings The X-TREME Hoist Ring TWN 830 B D X-TREME 830 Hoist Ring In sizes from M0 to M56 ( 2 4 ) 00% WLL in all lifting and pulling directions Integrated ball bearing design allows the Hoist Ring to rotate, turn and twist to the perfect angle every time Simple, compact design and ease of installation make using the X-TREME 830 child s play Special screw length up to 3x screw length, upon request Swivels under load E G F H T d A Screw Size d Part.-No. Working Load Limit Thread Length G E F D T B A SW H d. [ lbs.] M0 M2 M6 M20 M24 M30 M36 M42 M48 M56 F34306 F34307 F34300 F3430 F34320 F34330 F34340 F34350 F34355 F34360,980 2,645 6,70,680 5,400 22,000 33,000 40,000 44,000 6,700 0.60 0.70 0.78 0.98.8.57 2.00 2.36 2.68 3.07 4.00 2.00 0.5 2.6.3.53.42 2.5 0.39 4.00 2.00 0.5 2.6.3.53.42 2.5 0.47 4.00 2.00 0.5 2.6.3.53.42 2.5 4.76 2.30 2.75.33 2.00.8 2.50 0.78 5.80 2.83 0.7 3.35.57 2.25 2.00 3.00.00 6.72 3.27 0.87 4.00 2.00 2.87 2.56 3.44.57 7.00 3.9 0.86 4.00 2.00 3.26 2.75 3.86.42 9.60 4.57.26 5.5 2.75 4.7 3.75 4.72.65 9.60 4.57.26 5.5 2.75 4.7 3.75 4.72.89 9.60 4.57.26 5.5 2.75 4.7 3.75 4.72 2.2 2 3.3 6 8 8.3 9 20. 00 % Working Load Limit in all directions! 00 % d 00 % 00 % SW Working Load Limit 00 % 00 % in all directions! X-TREME good! 54 The Name

TLP Hoist Rings The NEW XS-Point TWN 890 00% WLL with 360 rotation and 80 swivel Extra wide bow is designed with a unique tension spring holding the bow in place at the perfect angle and allowing one handed use. Fast and uncomplicated mounting and removal using standard tools. Thread d x G Part.-No. Working Load Limit E F D T B A C H K L M N M0x7 M2x22 M6x30 M20x38 M24x4 M27x50 M30x58 M36x70 M42x78 M48x76 0.5t 0.8t.5t 2.5t 4.0t 5.0t 6.0t 8.0t 0.0t 2.0t F35243 F35244 F35245 F35246 F35247 F35248 F35249 F35250 F3525 F35252,00,764 3,300 5,500 8,800,000 3,200 7,600 22,000 26,400 3.8 2.0 0.5 2.8 2.9 2.5.8.5.0.2 0.3 3.8 2.0 0.5 2.8 2.9 2.5.8.5.0.2 0.3 3.8.8 0.5 2.8 2.9 2.5 2.0.6.0.2 0.3 3.9.7 0.5 2.8 2.9 2.5 2.2.7.0.2 0.3 5.7 2.8 0.7 4. 3 2.8 3.6 2.9 2.3.4.8 0.5 5.7 2.7 0.7 4. 3 2.8 3. 2.9 2.3.4.8 0.5 5.7 2.5 0.7 4. 3 2.8 3.2 3. 2.3.4.8 0.5 7.8 3.8.3 3.9 3.9 3.8 5.8 4. 3.2 2.0 2.4 0.6 7.9 3.6.3 3.9 3.9 3.8 5.8 4.3 3.3 2.0 2.4 0.6 7.9 3.4.3 3.9 3.9 3.8 5.8 4.5 3.3 2.0 2.4 0.6 TLP Hoist Rings Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 55

TLP Hoist Rings T C Lashing Point ZK Module TWN 470 The newly developed ZK module from THIELE is a lashing ring with a cassette that can easily be adapted and attached to the side frames of trailers. These lashing rings are made of the same steel used in the manufacture of lashing chains. The THIELE ZK module is additionally approved by the German TÜV inspection board and complies with the European standard DIN EN 2640. It also offers 00% lashing capacity and is capable of withstanding load in all directions of strain. The lashing point has a swivel range of 50, enabling the secure strapping of lowload goods as well as goods that project beyond the load platform. Besides this, the lashing ring is retractable, consequently preventing accidents from happening when walking on the cargo area. Finish: RAL 3003 Lashing Capacity (LC) [dan] A B C D E T* app. 5 0 F35236 F35237 5,000 0,000 4.2 0.47 5.67 2.83.97 0.55 5.39 0.59 5.67 2.83 2.36 0.7 5.73 7.94 E A B D Welded Lashing Point XL with spring TWN 880 A perfect interaction between compactness and easier handling. The small size of the TWN 880 lashing point was at the focus during the development of this weld-on lashing point. The high working load limit/lashing capacity when compared with its compact design is what makes the lashing point something special. It can be swivelled by 80. 00% Magnetic crack tested. Finish: RAL 5002 H C Nominal Size Lashing Capacity (LC)* [dan] D B A E* H C app. 6-XL 8-XL 0-XL 3-XL F35204 F35205 F35206 F35207 /4 3,000 5,000 8,000 3,500 0.55.50 2.56.65 0.98.93 0.59.77 2.99.77.06.97 0.67.97 3.35 2.24.22 2.7 0.9 2.68 4.57 3..73 3.03 0.93.26.87 4.85 * upright standing ring 56 The Name

G r a d e 8 0 Calibrated hoist chain Grade 80 (Type T, DAT according to EN 88-7) Article-No. Article-No.. [lbs] 4x2 4.2 x2.2 5x5 5.3 x5.2 6x8 7x2 ) 7x22 7.4 x2.2 8x24 9x27 ) 0 x30 x3 ) 3 x36 ) 6 x45 ) 8 x50 22 x66 ) 3.5 x90 )2) F09030 F09050 F09060 F09065 F09070 F09075 F09080 F09085 F0906 F09026 F0903 F09036 F09046 F0905 F09056 F0906 F09066 F0907 F09076 F0908 F09086 F09002 F09027 F09047 F09057 F09062 F09008 F0908 F09028 F09033 F09038 F09048 F09053 F09058 F09063 F09009 F0904 F0909 F09024 F09029 F09034 F09039 F09044 F09049 F09054 F09059 F09064 0.030.77 0.030.86 0.05.2 0.05.39.74 0.07 2.38 0.09 2.34 0.09 2.7 0. 3. 0.2 3.95 0.5 4.87 0.96.06 0.248.53 0.34 2.83 0.5 6.3 0.64 25.59 0.93 49.38.95 Calibrated hand chain, el. galvanized 5x25 Article-No. Article-No.. [lbs] Z02655.0 Hebezeugketten Technical Properties Chain Diameter Pitch Width Multi Pitch Length d Tolerance p Tolerance w 3 min. w 2 max. x p n Tolerance 4x2 4.2 x 2.2 5x5 5.3 x 5.2 6x8 7x2 ) 7x22 7.4 x 2.2 8x24 9x27 ) 0 x 30 x 3 ) 3 x 36 ) 6 x 45 ) 8 x 50 22 x 66 ) 3.5 x 90 )2) 4.0 4.2 5.0 5.3 6.0 7.0 7.0 7.4 8.0 9.0 0.0.0 3.0 6.0 8.0 22.0 3.5 0.2 +0. / -0.2 0,2 +0. / -0.2 0,2 +0. / -0.28 0.3 +0. / -0.3 0.3 +0. / -0.4 0.4 +0.3 / -0.4 +0. / -0.5 +0.3 / -0.6 0.9 +0.8 / -..6 2.0 2.2 5.0 5.2 8.0 2.0 22.0 2.2 24.0 27.0 30.0 3.0 36.0 45.0 50.0 66.0 90.0 +0.5 / -0. +0.5 / -0. +0.2 / -0. +0.2 / -0. +0.25 / -0. +0.3 / 0 +0.3 / -0.5 +0.3 / -0.5 +0.3 / -0.5 +0.25 / -0. +0.4 / -0.2 +0.3 / -0.5 +0.35 / -0.5 +0.45 / -0.25 +0.65 / -0.35 +0.65 / -0.35 +.2 / -0.6 4.8 4.8 6.0 5.9 7.2 8.4 8.4 8.4 0.2 0.8 2.0 3.2 5.2 8.2 2.6 27.0 37.8 3.6 3.7 7.0 6.9 20.4 23.4 23.8 23.8 27.2 30.4 34.0 36.5 42.9 52.8 6.2 75.0 07. 32.0 34.2 65.0 67.2 98.0 23.0 242.0 233.2 264.0 297.0 330.0 34.0 396.0 495.0 550.0 726.0 990.0 +0.4 / -0.2 +0.4 / -0.2 +0.5 / -0.3 +0.5 / -0.3 +0.6 / -0.3 +0.7 / 0 +0.8 / -0.4 +.7 / +0.7 +0.8 / -0.4 +0.7 / -0.3 +.0 / -0.5 +0.9 / -0.3 +. / -0.2 +.4 / -0.5 +.75 / -0.85 +2.0 / -0.7 +3.2 / -.6 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 57

G r a d e 8 0 Technical Properties Working Load Table Type T for manual hoists 3) Surface Hardness Metric tonnes min. 4 x.8 4x2 4.2 x2.2 5x5 5.3 x5.2 6x8 7x2 ) 7x22 7.4 x2.2 8x24 9x27 ) 0 x30 x3 ) 3 x36 ) 6 x45 ) 8 x50 22 x66 ) 3.5 x90 )2) 0.5 0.5 0.8..5.5 2.0 2.5 3.2 5.3 8.2 0.4 5.0 3.8 360, HV 5 360, HV 5 360, HV 5 360, HV 5 360, HV 0 360, HV 0 360, HV 0 360, HV 0 360, HV 0 360, HV 0 360, HV 0 360, HV 0 360, HV 0 360, HV 0 Type DAT for electric hoists 3)4) Working L.L. Surface Hardness Metric tonnes min. 0.4 0.4 500, HV 5 0.45 0.4 500, HV 5 0.45 500, HV 5 0.72 0.9.2.4.6 2.0 2.5 3. 0.72 0.9.2.4.6 2.0 2.5 3. 500, HV 5 500, HV 5 500, HV 0 500, HV 0 500, HV 0 500, HV 0 500, HV 0 500, HV 0 450, HV 0 8.3 8.3 Test Force MPF min. [kn] 2.6 3.9 9.6 22. 28.3 38.5 38.5 43.0 50.3 63.6 78.5 95.0 33.0 20.0 255.0 380.0 780.0 Breaking Force BF min. [kn] 20. 22.0 3.4 36.0 45.2 6.6 6.6 69.0 80.4 02.0 26.0 52.0 22.0 322.0 408.0 608.0 247.0 Operating mode Drive mechanism group Type of chain Nominal stress at highest admissible chain force Nominal stress at minimum breaking force ISO 430 [N/mm 2 ] [N/mm 2 ] Hand Operated Hoist T 200 800 Cm DAT 60 800 Bm DAT 60 800 Power Driven Hoist Am DAT 40 800 2m DAT 25 800 3m DAT 2 800 Minimum elongation at break Lower temperature limit Upper temperature limit % F F 0-40 392 0-40 392 0-40 392 0-40 392 0-40 392 0-40 392 Advices: ) Limited tolerances. Meet also the requirements as per DSKN 726 300. 2) similar EN 88-7 3) Type T for manual hoists; Type DAT for power driven hoists. 4) The selection criteria of EN 88-7 part B for power driven hoists (influencing factors, like engine group, No. of teeth, speed, etc.) are to be considered. Surfaces optional bright polished or electro galvanized. Further finishes upon request. Standard manufacturing lengths 50m, other lengths upon request. Hoist Chains are being proofed as per EN 88-7 and marked with T3 Thiele quality brand mark. Tests results are being stated as per EN 88-7 in a test certificate. 5) In order to ensure proper operation, please send your Sprocket information data. 58 The Name

TM Hoists TM-Series Advantages of the overload protection with TM-Series: Prevents the hoist from being overloaded to a point that it becomes dangerous Helps protect the operator from injury Protects the load being lifted Longer service life TM Hebezeuge TM Hoists TM-Chain Hoists TWN 000 TM-Lever Tools 00 with Overload Protection* Lightweight robust steel construction Super strength alloy loadchain as per EN88-7 galvanized and yellow chromated Minimum headroom Minimum effort to raise maximum load by easy handling Hooks with strong cast steel safety latches Lower hook easily turnable with roller bearing Also approved for tensioning as per EN 295 (TM-Lever Tool only) Fully enclosed gear train (TM-Chain Hoist only) Protected automatic Weston brake with unique Twin Pawls galvanised handchain as standard (TM-Chain Hoist only) Durable baked enamel paint protection Spare parts available TÜV / GS / CE approved Supply with individual test certificate and manual in 7 languages Approved for mining acc. to ATEX/68+69 (PN-EN 3463-:2003) TM-Chain Hoist Capacities 500 kg to 5 tonnes TM-Lever Hoists Capacities 250 kg to 6 tonnes TM Hoists *Except TM-LB 250 kg Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 59

TM Hoists TM-Chain Hoist TWN 000 with Overload Protection Capacities ton to 5 ton Safe Working Load 500 kg.0 to 2.0 to 3.0 to 5.0 to Lift 0 ft (. 3.05 m) Lift 5 ft (. 4.60 m) Lift 20 ft (. 6.0 m) Lift 30 ft (. 9.0 m) Lift 40 ft (. 2.2 m) Strands of chain Effort to lift W.L.L. -0 ft. Net weight Loadchain Diameter Headroom (A) Width (B) Depth (C) Hook opening (upper) Hook opening (lower) * Special lifts upon request! F0635 F06352 F06353 F06354 F06355 22 22 6 0.64 5 5.6.4 F0636 F06362 F06363 F06364 F06365 66 26 6 2.49 6.23 5.52.7 F0637 F06372 F06373 F06374 F06375 77 48 8 6.3 7.37 6.34.8 F0638 F06382 F06383 F06384 F06385 2 60 70 8 8.32 8.27 6.34 2. F0639 F06392 F06393 F06394 F06395 2 90 0 0 25.06 9.97 6.34 2.4 TM-Lever Hoist TWN 00 with Overload Protection Capacities /4 ton to 6 ton Safe Working Load / Tensioning Force 250 kg 750 kg.5 to 3.0 to 6.0 to Lift 5 ft (..5 m) Lift 0 ft (. 3.05 m) Lift 5 ft (. 4.60 m) Lift 20 ft (. 6.0 m) Strands of chain Effort to lift W.L.L. - 5 ft. Net weight Loadchain Diameter Length of lever handle (D) Headroom (A) Width (B) Depth (C) Hook opening (upper) Hook opening (lower) except TM-LB 250 kg * Special lifts upon request! F0690 F06902 F06903 F06904 4 4 4 6.3 9 3.3 3.6.0 F0624 F06242 F06243 F06244 30 5 6 2.8 5.4 5.8.7.7 F0625 F06252 F06253 F06254 48 24 8 6. 5 6.3 6.8.8.8 F0626 F06262 F06263 F06264 70 46 0 6. 8.9 7. 7.9 2. 2. F0627 F06272 F06273 F06274 2 75 68 0 6. 24.4 9.3 7.9 2.4 2.4 60 The Name

TM Hoists Load chain mounting TM-Chain Hoists Chain plan guide roller No. 2 (inside). The load chain mounting is described in direction from hook to anchorage. 2. Pay attention not to twist the load chain. 3. The load chain will be carried by the sprocket in case of operation of the hand chain. It will be guided by the guide rollers. 4. Load chain ends should be fixed with bolts and split pins. 5. The load chain should be lubricated for the first use. Position of chain end. vertical load chain end; welding-zone of all vertical chain links face outwards Position of chain and guide roller No. guide roller No. Loadchain below guide roller No. : Postion of chain and guide roller No. 2 guide roller No. 2 Load chain below guide roller No. 2: TM Hoists Control Right side view: Hook/Bottom block in front Loadchain below of anchorage; will be fixed at anchorage later Left side view: Anchorage in front Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 6

TM Hoists Load chain mounting TM-Lever Hoists Chain plan TM-LB 025 TM-LB-OP 075 N TM-LB-OP 50 N TM-LB-OP 300 N TM-LB-OP 600 N Insertion of the chain Welding zone of all vertical chain links face outwards Control TM-LB 025 TM-LB-OP 075 N TM-LB-OP 50 N TM-LB-OP 300 N TM-LB-OP 600 N 62 The Name

TM Hoists TM-Girder Clamp B A Capacity [t] TM-Girder Clamp Clearance Adjustable beam width E F A B E F Z0833 0.95 7.7 8.55 3.55 2.96-9.06 2 Z0834 0.95 7.7 8.55 3.55 2.96-9.06 3 Z0835 4.03 8.67 0.9 5.7 3.5-2.6 5 Z0836 4.03 8.67 0.9 5.7 3.55-2.6 Labels TM Hoists Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 63

TM Hoists Spare Parts TM-Series Use with TM-Chain Hoists Capacity [kg max] Ratchet disc 7 (prev. No. 27) Z06928 B 05 500 Z06929 B 0,000 Z06930 B 20 2,000 Z0693 B 30 3,000 Z06932 B 50 5,000 Use with TM-Chain Hoists Capacity [kg max] Friction plate 6 (prev. No. 28) Z06934 B 05 500 Z06935 B 0,000 Z06936 B 20 2,000 Z06937 B 30 3,000 Z06938 B 50 5,000 Use with TM-Chain Hoists Capacity [kg max] Top hook assy 6N (prev. No. 23) Z09939 B 05 500 Z09940 B 0,000 Z0994 B 20 2,000 Z09942 B 30 3,000 Z09943 B 50 5,000 Use with TM-Chain Hoists Capacity [kg max] Safety clip 7N (prev. No. 8N) Z09944 B 05 500 Z09945 B 0,000 Z09946 B 20 2,000 Z09947 B 30 3,000 Z09948 B 50 5,000 Use with TM-Chain Hoists Capacity [kg max] Bottom hook assy 8N (prev. No. 7N) Z09949 B 05 500 Z09950 B 0,000 Z0995 B 20 2,000 Z09952 B 30 3,000 Z09953 B 50 5,000 64 The Name

TM Hoists Use with TM-Lever Hoists Capacity [kg max] Ratchet Disc assy T 2N (prev. No. T7+T8) Z06960 LB 75 750 Z0696 LB 00,500 Z06962 LB 300 / LB 600 3,000 / 6,000 Use with TM-Lever Hoists Capacity [kg max] Top hook assy T 8N (prev. No. 3N) Z09968 LB 75 500 Z09969 LB 50,500 Z09970 LB 300 3,000 Z0997 LB 600 6,000 Use with TM-Lever Hoists Capacity [kg max] Bottom hook assy T 0N (prev. No. 33N) Z09972 LB 75 500 Z09973 LB 50,500 Z09974 LB 300 3,000 Z09975 LB 600 6,000 Use with TM-Lever Hoists Capacity [kg max] TM Hoists Safety clip T 9N (prev. No. 6N) Z09976 LB 75 750 Z09977 LB 50,500 Z09978 LB 300 3,000 Z09979 LB 600 6,000 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 65

THIELE Stainless Steel Chains Art.-No. Grade AISI 3/6 Plant Standard TWN W.L.L. [kg] Test Force [kn] Breaking Force [kn] min. Standard Chain Diameter d Tol. Pitch t Tolerance Width b min. b 2 max. app. [kg] 2x2 2x22 3x6 3x26 4x6 4x9 4x32 5x8.5 5x2 5x35 6x8.5 6x42 7x22 8x24 8x52 0 x28 3 x36 3 x82 6 x45 Z02607 Z02587 Z02658 Z02485 Z02604 Z02634 Z02824 Z02484 Z02743 Z0255 Z02633 Z02593 Z0270 Z02483 Z02530 Z02548 Z02662 Z0263 Z027 TWN 0084 TWN 0084 TWN 0084 TWN 0084 TWN 0083 TWN 0084 TWN 0082 TWN 0083 TWN 0084 TWN 0082 TWN 0083 TWN 0082 TWN 0083 TWN 0083 TWN 0082 TWN 0083 TWN 0083 TWN 0082 TWN 0083 200 00 320 60 400 200 630 800 400 250 2000 000 3200 5 2.5 8 4 0 5 6 20 0 32 50 25 40 8 6 3 0 6 2.5 25 32 25 50 80 63 28 DIN 5685 ) DIN 5685 ) DIN 5685 ) DIN 5685 ) DIN 766 DIN 5685 ) DIN 763 ) DIN 766 DIN 5685 ) DIN 763 ) DIN 766 DIN 763 ) DIN 766 DIN 766 DIN 763 ) DIN 766 DIN 766 DIN 763 ) DIN 766 2 2 3 3 4 4 4 5 5 5 6 6 7 8 8 0 3 3 6 ± 0.0 ± 0.0 ± 0.5 ± 0.5 ± 0.20 ± 0.20 ± 0.20 ± 0.20 ± 0.25 ± 0.25 ± 0.20 ± 0.20 ± 0.30 ± 0.30 ± 0.30 ± 0.40 ± 0.50 ± 0.50 ± 0.60 2 22 6 26 6 9 32 8.5 2 35 8.5 42 22 24 52 28 36 82 45 +0.6 / -0.6 +. / -. +0.8 / -0.8 +.3 / -.3 +0.3 / -0.2 +.0 / -.0 +.0 / -.0 +0.4 / -0.2 +. / -. +. / -. +0.4 / -0.2 +.3 / -.3 +0.4 / -0.2 +0.4 / -0.2 +.6 / -.6 +0.5 / -0.3 +0.6 / -0.3 +2.5 / -2.5 +0.8 / -0.4 3.6 3.6 5.4 5.4 4.8 7.2 7.2 6.0 9.0 9.0 7.2 0.8 8.4 9.6 4.4 2.0 5.6 23.4 9.2 3.6 6.8 7.0 2.0 20.4 25.2 23.8 27.2 33.6 36.0 47.0 54.6 58.0 0.02 0.02 0.05 0.04 0.09 0.09 0.08 0.6 0.5 0.3 0.24 0.8 0.32 0.43 0.33 0.69.8 0.90 0.87 Art.-No. Grade AISI 3/6 Plant Standard TWN W.L.L. [kg] Test Force [kn] Breaking Force [kn] min. Standard Chain Diameter d Tol. Pitch t Tolerance Width b min. b 2 max. per foot [kg] 5x8.5 6x8.5 7x22 8x24 0 x28 0 x65 3 x36 3 x82 6 x45 F00050 F00075 F00079 F0063 F00285 F038 F00385 F054 F00485 TWN 0083 TWN 0083 TWN 0083 TWN 0083 TWN 0083 TWN 0082 TWN 0083 TWN 0082 TWN 0083 320 400 630 800 250 630 2000 000 3200 8 0 6 20 32 6 50 25 80 3 6 25 32 50 25 80 40 28 DIN 766 DIN 766 DIN 766 DIN 766 DIN 766 DIN 763 ) DIN 766 DIN 763 ) DIN 766 5 6 7 8 0 0 3 3 6 ± 0.20 ± 0.20 ± 0.30 ± 0.30 ± 0.40 ± 0.50 ± 0.50 ± 0.50 ± 0.60 8.5 8.5 22 24 28 65 36 82 45 +0.4 / -0.2 +0.4 / -0.2 +0.4 / -0.2 +0.4 / -0.2 +0.5 / -0.3 +2.0 / -2.0 +0.6 / -0.3 +2.5 / -2.5 +0.8 / -0.4 6.0 7.2 8.4 9.6 2.0 8.0 5.6 23.4 9.2 7.0 20.4 23.8 27.2 36.0 42.0 47.0 54.6 58.0 0.5 0.79.06.4 2.28.68 3.87 2.87 5.82 Art.-No. Grade DUPLEX Plant Standard TWN W.L.L. [kg] Test Force [kn] Breaking Force [kn] min. Standard Chain Diameter d Tol. Pitch t Tolerance Width b min. b 2 max. per foot [kg] 5x8.5 6x8.5 7x22 8x24 0 x28 0 x65 3 x36 3 x82 6 x45 F00077 F00079 F00080 F0065 F00284 F044 F00388 F045 F00465 TWN 0083 TWN 0083 TWN 0083 TWN 0083 TWN 0083 TWN 0082 TWN 0083 TWN 0082 TWN 0083 560 800 00 400 2200 200 3800 2000 5800 4 20 28 35 54 30 95 50 45 22 32 44 55 87 48 50 80 230 DIN 766 DIN 766 DIN 766 DIN 766 DIN 766 DIN 763 ) DIN 766 DIN 763 ) DIN 766 5 6 7 8 0 0 3 3 6 ± 0.20 ± 0.20 ± 0.30 ± 0.30 ± 0.40 ± 0.50 ± 0.50 ± 0.50 ± 0.60 8.5 8.5 22 24 28 65 36 82 45 +0.4 / -0.2 +0.4 / -0.2 +0.4 / -0.2 +0.4 / -0.2 +0.5 / -0.3 +2.0 / -2.0 +0.6 / -0.3 +2.5 / -2.5 +0.8 / -0.4 6.0 7.2 8.4 9.6 2.0 8.0 5.6 23.4 9.2 7.0 20.4 23,8 27.2 36.0 42.0 47.0 54.6 58.0 0.5 0.79.06.4 2.28.68 3.87 2.87 5.82 66 The Name

Stainless Steel Chains are mostly used in environmental processes with corrosive or aggressive influences, which one will find e.g. in the chemical industry, food industry, medical and pharmaceutical industries and ship building and/or ships. Due to their high value finish they will also find applications in architecture. The materials.440 (V4A),.457 (V4A) and.4462 (DUPLEX) distinguish themselves through their corrosion resistance and mechanical qualities. The material.457 differs to material.440 due to the addition of Titan through a higher resistance against intergranular corrosion (EN0088-3, Tab. 0). The corrosion resistance is classified by the PRE number (Pitting Resistance Equivalent) as per standard VG8249. The tables show that the material DUPLEX is especially useful for a high resistance in sea water. In particular, for the higher resistance in environments with high chlorinate ion concentrations and higher temperatures, which one can find e.g. in the Southern Sea or Mediterranean areas. The higher strength of up to 30% at the same time has the advantage of lower weight when selecting chains. Consequently, this material has an outstanding capability for all purposes, especially as anchor chains (better distribution in the chain box) or for conveying systems (better gliding). material PRE No. AISI 30 (.430) AISI 36 (.440) 23.0 26.75 AISI 36Ti (.457) 23.0 28,50 DUPLEX 30.85 38.07 as per VG 8249 PRE No. Highest temperature for resistance in salt water 35 F 40 (60 C) 30 F 04 (40 C) 24 F 77 (25 C) 20 F 59 (5 C) 5 F 32 (0 C) Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 67

Chains for Fishing Industry TWN 008 Field of application Twist resistant round steel chains of this data sheet are used for all methods of commercial fishing. The geometrical dimensions match the corresponding type of trawl nets. Type ML = mid link Type LL = long link Dim. Type diameter d tol p pitch tol inside width b min. max. proof force min. [kn] breaking force min. [kn] weight [lbs/m] Chains for Fishing Industry 0 x 40 3 x 55 3 x 8 6 x 64 6 x 00 9 x 76 9 x 00 22 x 88 22 x 0 26 x 40 28 x 50 /8 ML ML LL ML LL ML LL ML LL LL LL Type ML = Mid Link Type LL = Long Link F0288 F02877 F02873 F02875 F02876 F02872 F02874 F02878 F0287 F0289 F02879 /8 ±0.05 ±0.09 ±0.09 ±0.023 ±0.023 ±0.0394 ±0.0394 ±0.043 ±0.043 ±0.05 ±0.055.576 2.67 3.9 2.522 3.940 2.994 3.940 3.467 4.334 5.56 5.90 ±0.047 ±0.067 ±0.095 ±0.075 ±0.8 ±0.09 ±0.8 ±0.02 ±0.30 ±0.65 ±0.773 0.53 0.690 0.690 0.847 0.847.004.004.62.62.394.54 0.59 0.788 0.788 0.946 0.946.23.23.300.300.674.942 63 07 07 6 6 227 227 305 305 26 24 24 322 322 454 454 60 60 850 986 0.375 0.433 0.556 0.443 0.842.300 0.564.836.684 2.297 2.28 Specifications Standard finish black dipped Elongation at break min. 5% Tensile strength 00-255N/mm 2 Material according to EN88-2 Embossed KWS-8, Germany, and idenification code Not for overhead lifting 68 The Name

Special Conveyor Chains for Poultry Industry Application: Chicken-Slaughterhouses. Technical properties: Calibrated Round Steel Chain Dimension: 8 x 25.4 mm Outside width: max. 26. mm Hardening depth: min. 0.6.0 mm, at min. 550 HV Measuring length: x p = 279.4 mm Surface hardness: min. 720 800 HV 0 Breaking force: min. 40 kn Finish: electro galvanized Marking: THIELE quality brand mark T3 per meter: app..32 kgs Art-No.: F06460 Chain connecting link Dimension: 8 x 25.4 mm Outside width: max. 26. mm Hardening depth: min. 0.6.0 mm Surface hardness: min. 720 800 HV 0 Breaking force: min. 25 kn Finish: electro galvanized Marking: THIELE quality brand mark T3 per piece: app. 0.04 kgs Art-No.: F42077 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 69

Manual Instructions (European) W A R N I N G! Sling Chains and Components can only be used, if user instructions and operating instructions have been read carefully and are completely understood. The indicated values of loads on the I.D. tags must not be exceeded. Due to improper use, chains can fail. IT S A QUESTION OF YOUR SAFETY Death or injury can occur from improper use or maintenance!. Transport and Storing All products must be protected during transportation, use, and storage in severe weather conditions. 2. Before first use Assembling, disassembling and using should only be accomplished by authorized persons as per BGR 500, Chapter 2.8 (in Germany) Check the following points before using the chain sling for the first time: - all test certificates exist (declaration of conformity, inspection certificate 3..B etc.); the chain sling you are going to use is the same that you ordered - Slinging Chains and Tensioning Chains are provided with the CE label - identification and working load limit marked on the chain sling are identical to the corresponding information indicated on the test certificate; all details concerning the chain sling have been entered into the chain card file - The mounting is prohibited until it has been found out, that the machine in which it should be built in, corresponds with the EC Directive for machines and its amendments (European rules and regulations). - In suitable intervals, check the chain sling for damages or wear (depending upon severity of conditions slings shall be inspected for damage as frequently as prior to each lift. All supplied user instructions must be maintained and available for reference until the product is removed from service. 3. Warning and use advice - EC Directive for Machines and its amendments as per 89/392/EWG - Operation and use instructions for sling chains as per DIN 685 - Part 5 -EN88 6. - Consult safety regulations for round steel chains used as slinging gear in hot dipped galvanizing plants (german rules and regulations) as per BGR 50 - Consult Safety Regulations for Cranes as per BGV D 6 - Consult load Suspension Devices for Lifting Operations (german rules and safety regulations) as per BGR 500, Chapter 2.8 - Consult Safety certificate for riggers as per BGI 556 - Consult components for sling chains as per EN 677-2 - Consult principles for test of industrial safety of lifting products - Consult slinging of rod iron using steel round steel chains when loading and unloading sea-going ships - Consult German rules and regulations VDI 2700-270-2702 Special Components, hooks and clutching devices should only be used in straight tensile direction Especially forbidden is: - the combination of different grades when assembling (except tongs) - the use of chain slings which do not correspond with grade 00 or grade 80 - overloading - to use a combination of products with different working load limits, unless the working load noted on the I.D. tag is based on the weakeast component. - the use of twisted or knotted chains - to use bolts or wires to connect components - to use deformed components, rigid or elongated chains - to lift or pull loads with sharp edges without padding the edges - to drive equipment over chain sling - to wrap a chain around a loadhook or tension point multiple times - to modify products by welding, burning, bending or other mechanical modifications - to make inadmissible modifications, e.g. the use of a 2-leg sling chain with shortening hooks as a 4-leg sling chain - to tip load a hook into a chain link - to apply the load on the tip, side or back of the hook - to load connectors (XL-Loks) at one side - to adjust chain links or products - to adapt inclination over 30 - to turn swivels or swivel hooks under load - to weld transport ring screw type lifting eyes - to exceed the indicated grip on lifting tongs - the use of open or riveted repair links It must be taken into consideration: In the event that THIELE Chain and Components are used in an automated process, all parts should be designed correspondingly larger and inspected at more frequent intervalls! - the load to be lifted - the free mobility of the hook s safety latches - the use under chemical influences for example acids and steam is restricted or prohibited - the influence of temperature on alloy chain and components - shock load impacts the chain or fitting while lifting or securing - any type of surface treatment to chain or fittings especially of hot dipped galvanizing can only be carried out by the manufacturer - when lifting keep hands and other parts of body far away from the components - be careful when locking hooks under load Danger of injury! - when not in use sling chains must be hung on a rack - ensure free mobility of chain slings or other devices in the crane hook - when using hooks without latches pay special attention to the position of the hook placement - to the installation positon - if necessary protect screw tensioners by locking elements to prevent automatic unlocking - load claws with chains only on the bottom of the pocket claws - protect chain by padding or wrapping sharp edges - Safety latches should not be obstructed when hooks are loaded - in case of shortening hooks, load chains must be loaded in the bowl of the hook - hook openings must point away from the load being lifted - that the hook up point and lifting hooks are compatible - also be sure that the lifting components are suitable for the application - do not sit loads on the chain sling - reduction of working load limits is necessary when making lifts at severe angles - consult charts when using alloy chain at extreme temperatures - working load limits must be reduced when using endless and basket slings - extreme caution should be used when using hooks for lifting molten metal or chemicals - chain slings shall be loaded properly to avoid damage to chain and load - keep personnel away from loads being lifted 4. Maintance and tests - The chain sling must be visually inspected before use. If damage is found, you must consult a chain expert as per VG9a. - The product must be removed from service if the following damage is found: - unreadable tags - breaks or deformation - cuts, notches, grooves or cracks - strong corrosion - heating over the admissible temperature allowed - elongation of chain must not exceed 5% of manufacturer s published size - elongation of the overall chain length shall not exceed 5 % - to determine wear rejection on the diameter of a link, you must measure the horizontal and the vertical and reject if reduction is more than 0%. - reject hooks if throat opening is opened greater than 0% of new hook or the safety latch does not seat properly - wear of hook eye or hook body exceed 5 % - missing or damaged safety latch of the hook or shortening component - incorrect screw replacement on lifting eyes - incorrect or damaged bolts or turn off locking Don t repair chain slings yourself unless fully trained. Please contact the manufacturer or a repair expert. Use only original spare parts from THIELE. 5. Regular inspections Regular inspection shall include measurement and visual inspection and should be carried out once each year at minimum. Each third year inspection must include the crack detection (magna flux). On a new chain, you must set up chain card index that shall contain a description of the chain as well as the identity of the certificate. The inspection schedule must be fixed. The condition of sling chains or tensioning chains and their accessories must be noted at each inspection. If damage is repaired, all repairs and details must be noted on the chain card. 70 The Name

Conversion Factors Convert from: Kilograms Metric Tons Pounds Metric Tons U.S. Tons Metric Tons Celsius Fahrenheit Millimeters Meters Inches Inches Centimeters Feet Yards Meters Miles Kilometers Decimal and Metric Conversion Table Multiply by: 2.204 2204.62 0.453 000 0.972.02 9/5 (then add 32) 5/9 (after subtracting 32) 0.0394 3.28 25.4 2.54 0.39 0.30 0.944.09.6 0.62 Convert to: Pounds Pounds Kilograms Kilograms Metric Tons U.S. Tons Fahrenheit Celsius Inches Feet Millimeters Centimeters Inches Meters Meters Yards Kilometers Miles Fractional Equivalent (in.) Decimal Equivalent (in.) Metric Equivalent (mm) Fractional Equivalent (in.) Decimal Equivalent (in.) Metric Equivalent (mm) /64 /32 3/64 /6 5/64 3/32 7/64 /8 9/64 5/32 /64 3/6 3/64 5/64 /4 7/64 9/32 9/64 2/64 /32 23/64 25/64 3/32 27/64 7/6 29/64 5/32 3/64 0.056 0.032 0.0469 0.0625 0.078 0.0938 0.094 0.250 0.406 0.562 0.79 0.875 0.203 0.288 0.2344 0.2500 0.2656 0.282 0.2969 0.325 0.328 0.3438 0.3594 0.3750 0.3906 0.4062 0.429 0.4375 0.453 0.4688 0.4844 0.5000 0.397 0.794.9 8.984 2.38 2.778 3.75 3.572 3.969 4.366 4.762 5.59 5.556 5.953 6.350 6.747 7.44 7.54 7.938 8.334 8.73 9.28 9.525 9.922 0.39 0.76.2.509.906 2.303 2.700 33/64 35/64 9/6 37/64 9/32 39/64 4/64 2/32 43/64 /6 45/64 23/32 47/64 49/64 25/32 5/64 3/6 53/64 2 55/64 57/64 29/32 29/64 6/64 3/32 63/64 0.556 0.532 0.5469 0.5625 0.578 0.5938 0.6094 0.6250 0.6406 0.6562 0.679 0.6875 0.703 0.788 0.7344 0.7500 0.7656 0.782 0.7969 0.825 0.828 0.8438 0.8594 0.8750 0.8906 0.9062 0.929 0.9375 0.953 0.9688 0.9844.0000 3.097 3.494 3.89 4.288 4.684 5.08 5.478 5.875 6.272 6.669 7.065 7.462 7.859 8.256 8.653 9.050 9.447 9.844 20.24 28 2.034 2.43 2.828 22.225 22.622 23.09 23.46 23.82 24.209 24.606 25.003 25.400 Toll Free -800-872-933 Fax (98) 665-48 email: sales@kwschain.com 7

KWS Inc. P.O. Box 470487 Tulsa OK 7447 Toll Free -800-872-933 Phone (98) 665-44 Fax (98) 665-48 email: sales@kwschain.com B09238 - IM -.000-09/204