Sliding Door Fittings For wooden doors Infront EKU clipo 10 S-IF For door weight up to 10 kg The single top running track can be installed by Screw fixing into groove or Clamping into groove with swivel lugs Door height : max. 1,200 mm Door width : max. 800 mm Door thickness : 16-19 mm Material : Plastic running gear and guide Running gear : Top running, 1 roller Running gear guided by : Friction bearing mounted plastic roller, steel axle Door stop : Stopper, with retainer for sliding into single top running track Installation : Running gear without tools (quick fixing system), not suitable for hardwood, guide for press fitting into drill hole Running gear installation 2.5 6.2
Sliding Door Fittings For wooden doors Set Cat. No. For 2 doors, with installation instructions 405.82.202 Packing : 1 set Order reference Please order guide and running track separately Set components(individual parts) For 2 doors Material Colour Packing pieces Running gear, quick fi xing by inserting with clip 4 Plastic Black 1, 100 405.83.901 Door stopper, with retaining spring, for top running tracks 2 Plastic Grey 1, 100 405.83.132 Guide, for press fitting 2 Plastic Anthracite 1, 50 405.83.104 Tracks Length m Cabinet top thickness mm Material Finish/colour Packing Ca t. No. m Single top running track, for screw fixing into groove with chipboard screws with countersunk head Ø 2.5 mm 2.5 min. 25 Aluminium Bright 2.5 405.87.002 3.5 min. 25 A Brigh 3.5 405.87.003 Single top running track, for clamping into groove with swivel lugs not suitable for hardwood 2.5 min. 19 Aluminium Bright 2.5 405.86.002 3.5 3.5 405.86.003 Single bottom guide track, ribbed, for press fitting and glue fixing into 7 mm groove 2.5 Plastic Anthracite 2.5 405.98.517 3.5 3.5 405.98.527 6.3
Sliding Door Fittings For wooden doors Infront EKU Clipo 15 SH-IF For door weights up to 15 kg, for straight or curved doors Door : Door width : Door thickness : Height adjustment : Material : Running gear : Running gear guided by : Door stop : Installation : max. 1,400 mm max. 1,000 mm 16-19 mm 1.5 mm on running gear using adjusting wheel Plastic housing, running gear and guide Top running, 1 roller Friction bearing mounted plastic roller, steel axle Top stopper, with retainer for sliding into single top running track Housing for screw fixing, running gear without tools (quick fixing system), guide for press fitting into drill hole The single top running track can be installed by Screw fixing into groove or Clamping into groove with swivel lugs Installation of single running track with curved doors Running gear installation With radiuses of min. 1,600 mm: Press-fit single running track in pre-milled groove. 6.4
Sliding Door Fittings For wooden doors Set For 2 doors, with installation instructions 405.82.215 Packing : 1 set Order reference Please order guide and running track separately Set components(individual parts) For 2 doors Material Colo ur Packing pieces Housing, for screw fixing 4 Plast ic Anth racite 1, 100 405.83.801 Running gear, quick fixing by inserting with clip 4 Plast ic Anth racite 1, 100 405.83.909 Track sup port 4 Plast ic Grey Door stopper, with retaining spring, for top running tracks 4 Plast ic Grey 1, 100 405.83.132 Guide, for press fitting 2 Plast ic Anth racite 1, 50 405.83.104 Tracks Single top running track, for screw fixing into groove with chipboard screws with countersunk head Ø 2.5 mm Leng th Cabinet top Material Finish/colour Packing m thickness mm m 2.5 min. 25 Aluminium Brigh t 2.5 405.87.002 3.5 3.5 405.87.003. 6.5
Sliding Door Fittings For wooden doors Infront EKU Clipo 15 V-IF For door weights up to 15 kg for serving hatches and narrow wooden frame doors Door height : max. 1,400 mm Door width : max. 1,000 mm Door thickness : 16-19 mm Height adjustment : 1 mm at running gear using screw Material : Zinc alloy housing, plastic running gear and guide Running gear : Top running, 1 roller Running gear guided by : Friction bearing mounted plastic roller, steel axle Door stop : Top stopper, with retainer for sliding into single top running track Installation : Housing for screw fixing into groove, running gear for screw fixing, guide for press fitting into drill hole The single top running track can be installed by screw fixing into groove or clamping into groove with swivel lugs Installation of single running track with curved doors Running gear installation With radiuses of min. 1,600 mm: Press-fit single running track in pre-milled groove. 2.5 6.6
Sliding Door Fittings For wooden doors Set Cat. No For 2 doors, with installation instructions 405.82.233 Packing : 1 set Order reference Please order guide and running track separately Set components(individual parts) For 2 doors Material Finish/colour Packing pieces Housing, for groove mounting 4 Zinc alloy 1, 100 405.83.828 Running gear, for inserting 4 Plastic Anthracite 1, 100 405.83.918 Track support 4 Plastic Light grey Door stopper, with retaining spring, for top running tracks 4 Plastic Grey 1, 100 405.83.132 Guide, for press fitting 2 Plastic Anthracite 1, 50 405.83.104 Tracks Single top running track, for screw fixing into groove with chipboard screws with countersunk head Ø 2.5 mm Single top running track, for clamping into groove with swivel lugs, not suitable for hardwood, Single bottom guide track, ribbed, for press fitting and glue fixing into 7 mm groove,, Length m Cabinet top thickness mm Material Finish/colour Packing m 2.5 min. 25 Aluminium Bright 2.5 405.87.002 3.5 3.5 405.87.003 2.5 min. 19 Aluminium Bright 2.5 405.86.002 3.5 3.5 405.86.003 2.5 Plastic Anthracite 2.5 405.98.517 3.5 3.5 405.98.527 6.7
Sliding Door Fittings For wooden doors - gentle closing Infront EKU Clipo 16 IF For wooden weights up to 16 kg Door height : Door width : Door thickness : Height adjustment : Material : Running gear : Running gear guided by : Door stop : Installation : max. 1,400 mm max. 1,000 mm 16-19 mm +2/-1 mm on running gear using adjusting wheel Housing, running gear and guide: Plastic Top running, 2 rollers Friction bearing mounted roller: Plastic, axle: Steel Top stopper, with retainer for sliding into single top running track Housing for screw fixing, running gear without tools (quick fixing system), guide for press fitting into drill hole Door thickness 16 mm Door thickness 19 mm The single top running track can be installed by screw fixing into groove or clamping into groove with swivel lugs Sliding Door Fittings For wooden doors - gentle closing Door overlap Running gear installation Soft closing mechanism installation 6.8
Sliding Door Fittings For wooden doors - gentle closing Set For 2 doors, with installation instructions 405.82.216 For 2 doors, with soft closing mechanism (2 pieces), with installation instructions 405.82.218 Packing : 1 set Order reference Order one soft closing mechanism each for door widths of 480 mm and above. Set components(individual parts) For 2 doors Material Finish/colour Running gear 4 Plastic Black Housing 4 Plastic Black Door follower 1 Plastic Grey Stopper 2 Plastic Grey Guide 2 Plastic Black Tracks Cabinet top thickness mm Material Finish/colour Packing Length m Single running track, for glue fixing min. 19 Aluminium Bright 1 2.5 405.87.042 3.5 405.87.043 Single running track, pre-drilled, for screw fixing Single running track, with swivel lugs (not suitable for hardwood/mdf) Track end piece, with swivel lugs (not suitable for hardwood/mdf) min. 30 Aluminium Bright 1 2.5 405.87.082 3.5 405.87.083 6.0 405.87.086 min. 19 Aluminium Bright 1 2.5 405.87.092 3.5 405.87.093 6.0 405.87.096 Plastic Grey 2 405.83.180 Track end piece, for screw fixing Plastic Grey 2 405.83.181 Double running track, pre-drilled, for screw fixing Double running track, pre-drilled, for screw fixing Single bottom guide track, ribbed, for press fitting and glue fixing into 7 mm groove Soft closing mechansim for retrofitting or for soft closing on both sides, with installation instructions min. 19 Aluminium Bright 1 2.5 405.90.032 3.5 405.90.033 6.0 405.90.036 min. 19 Aluminium Anodized 1 2.5 405.90.942 3.5 405.90.943 6.0 405.90.946 Plastic Anthracite 1 2.5 405.98.517 3.5 405.98.527 6.0 405.98.561 Plastic Grey 1 405.10.070 6.9
Sliding Door Fittings For wooden doors - gentle closing Infront EKU Clipo 25 S-IF For door weights up to 25 kg, for sliding doors with guide with zero clearance The single top running track can be installed by screw fixing into groove or clamping into groove with swivel lugs Length of single top running tracks = internal cabinet width - 50 mm Before installing single top running track: Insert top door stoppers Door height : Door width : Door thickness : Height adjustment : Material : Running gear : Running gear guided by : Door stop : Installation : max. 2,200 mm max. 1,000 mm 19-25 mm 2 mm on running gear using eccentric screw Plastic housing, zinc alloy running gear, plastic guide Top running, 2 rollers Friction bearing mounted, plastic rollers Top stopper, with retainer for sliding into single top running track Housing for screw fixing, running gear without tools (quick fixing system), guide for press fitting into drill hole Installation Housing and running gear Adjustment 2 mm Housing installation Guide with sprung roller Guide with zero clearance 6.10
Sliding Door Fittings For wooden doors - gentle closing Set Cat. No. For 2 doors, with installation instructions 405.04.001 Packing : 1 set Order reference Please order guide and running track separately Set components(individual parts) For 2 doors Material Finish/colour Packing pieces Cat. No. Housing, for screw fixing 4 Plastic 1, 100 405.00.030 Running gear with height adjustment 2 mm, 2 rollers with friction bearings 4 Zinc alloy Anthracite 1, 100 405.00.010 Door stopper, with retaining spring, for top running tracks 4 Plastic Bright 1, 100 405.00.050 Track end piece, for inserting or removing running geres, for single top running track 4 Plastic Grey 1, 100 405.00.070 Guide, for press fitting, with sprung roller 2 Plastic Grey 1, 50 405.04.040 Tracks Single top running track, for screw fixing into groove with chipboard screws with countersunk head Ø 3.0 mm Single top running track, for clamping into groove with swivel lugs, not suitable for hardwood Length m Cabinet top thickness mm Material Finish Packing m Cat. No. 2.5 min. 30 Aluminium Bright 2.5 405.00.202 3.5 3.5 405.00.203 2.5 min. 25 Aluminium Bright 2.5 405.01.002 3.5 3.5 405.01.003 Single bottom guide track, for press fitting and gluing into groove 2.5 Aluminium Bright 2.5 405.04.251 3.5 3.5 405.04.351 6.11
Sliding Door Fittings For wooden doors - gentle closing Infront EKU Clipo 35 S-IF For door weights up to 35 kg, for sliding doors with guide with zero clearance The single top running track can be installed by screw fixing into groove or clamping into groove with swivel lugs Length of single top running tracks = internal cabinet width - 50 mm Before installing single top running track: Insert top door stoppers Installation Door height : max. 2,200 mm Door width : max. 1,000 mm Door thickness : 19-25 mm Height adjustment : 2 mm on running gear using eccentric screw or screw Material : Plastic housing, zinc alloy running gear, plastic guide Running gear : Top running, 4 rollers Running gear guided by : Friction bearing mounted, plastic rollers Door stop : Top stopper, with retainer for sliding into single top running track Installation : Housing for screw fixing, running gear without tools (quick fixing system), guide for press fitting into drill hole Housing and running gear Adjustment 2 mm Housing installation Guide with sprung roller Guide with zero clearance 6.12
Sliding Door Fittings For wooden doors - gentle closing Set For 2 doors, with installation instructions 405.06.001 Packing : 1 set Order reference Please order guide and running track separately Set components(individual parts) For 2 d oors Material Finish/colour Packing pieces Housing, for screw fixing 4 Plastic Anthracite 1, 100 405.00.030 Running gear with height adjustment 2 mm, 4 rollers with friction bearings 4 Zinc alloy Bright 1, 100 405.02.010 Suspension fitting, for clipping on, with support screw Door stopper, with retaining spring, for top running tracks Track end piece, for inserting or removing running gears, for single top running track 4 Zinc alloy Bright 1, 100 405.02.020 4 Plastic Grey 1, 100 405.00.050 4 Plastic Grey 1, 100 405.00.070 Guide, for press fitting, with sprung roller 2 Plastic Grey 1, 50 405.04.040 Tracks Single top running track, for screw fixing into groove with chipboard screws with countersunk head Ø 3.0 mm Single top running track, for clamping into groove with swivel lugs, not suitable for hardwood Length m Cabinet top thickness mm Material Finish Packing m Ca t. No. 2.5 min. 30 Aluminium Bright 2.5 405.00.202 3.5 3.5 405.00.203 2.5 min. 25 Aluminium Bright 2.5 405.01.002 3.5 3.5 405.01.003 Single bottom guide track, for press fitting and gluing into groove 2.5 Aluminium Bright 2.5 405.04.251 3.5 3.5 405.04.351 6.13
Sliding Door Fittings For wooden doors Vorfront EKU Regal A 25 H VF For door weights up to 25 kg, for shelving 1 door. 2.5 Mounting sliding door to cabinet Door height : Door width : Door thickness : Height adjustment : Material : Running gear : Running gear guided by : Door stop : Installation : max. 2,400 mm max. 1,200 mm 19-25 mm 2 mm on running gear using eccentric screw Steel running gear and guide Top running, 1 roller Ball bearing mounted, plastic coated roller Top and bottom stopper, with top retainer for sliding into single top running track Running gear and guide for screw fixing, fitting and removing of door without tools Drilling pattern for running gear and guide Hook running gear into single top running track Swing door into position, push guide upwards into single guide track and screw on. Top running gear Bottom guide 6.14
Sliding Door Fittings For wooden doors Set For 1 door, with installation instructions 405.55.011 Packing : 1 set Order reference Please order guide and running track separately Set components(individual parts) For 1 door Material Finish/colour Running gear 2 Steel Yellow chromatized Top door stopper 1 Plastic Grey Guide 2 Steel Yellow chromatized Bottom door stopper 2 Plastic Grey Tracks Length m Material Finish/colour Packing Single top running track, for screw fixing with Pan head chipboard screws Ø 3.5 mm 2.5 Aluminium Bright 2.5 m 405.56.002 3.5 3.5 m 405.56.003 Single bottom guide track, for sc rew fixing with chipboard screws with count ersunk head Ø 2.5 mm or for glue fixing (with 19 mm thick base panels) 2.5 Aluminium Bright 2.5 m 405.30.026 3.5 405.30.036 Centre door stopper, for cabinets with front running, centre door for engaging in centre position Plastic Grey 1, 5 405.33.030 Packing : 1 pc Order reference The single top running track and the single bottom guide track are also available in fixed lengths with appropriate purchase quantities. 6.15
Sliding Door Fittings For wooden doors Vorfront EKU Regal B 25 H VF For door weights up to 25 kg for individually positioned door Running gear, bottom running Running gear, top running Drilling pattern for running gear and guide Door height : max. 2,000 mm Door width : max. 1,200 mm Door thickness : 16-30 mm Height adjustment : 3 mm on running gear using eccentric screw Material : Steel running gear and guide Running gear : Top and bottom running, 1 roller Running gear guided by : Plastic coated roller Door stop : Top and bottom stopper, with retainer for sliding into single running track Installation : Connecting spacer plate, running gear and guide for screw fixing Single running and guide track installation Top running Bottom running Installation dimensions With fixing clips With connecting bolt and Minifix connector housing 6.16
Sliding Door Fittings For wooden doors Set For 1 door, with installation instructions 405.55.212 Packing : 1 set Order reference Please order guide and running track separately Set components(individual parts) For 1 door Material Finish/colour Running gear with friction bearing 2 Steel Yellow chromatized Top door stopper, with retaining spring, for single running track 4 Plastic Grey Guide 2 Steel Yellow chromatized Conne cting spacer plate, for running gear and guide 4 Zinc alloy Bright Fixing clip 22 Plastic Grey Safety clip 4 Zinc alloy Bright End cap 4 Plastic Grey Mounting jig 1 Plastic Black Tracks and individual components Length m Material Finish/colour Packing Cat. No. Single running track, for clipping onto fixing clips or push fitting with connecting bolts Single guide track, for clipping onto fixing clips or push fitting with conn ecting bolts 2.5 Aluminium Silver 2.5 m 405.69.902 3.5 coloured anodized 3.5 m 405.69.903 2.5 Aluminium Silver coloured 2.5 m 405.61.902 3.5 anodized 3.5 m 405.61.903 Conne cting bolts, for fixing running and guide tracks Zinc alloy Bright 1, 100 405.45.000 Centre door stopper for cabinets with front running, centre door for engaging in centre position Plastic Grey 1, 5 405.67.070 Packing : 1 pc Order reference The single running and guide tracks are also available in fixed lengths with appropriate purchase quantities. Please order Minifix connector housing for tightening the connecting bolt. 6.17
Sliding Door Fittings For wooden doors Vorfront Sliding Fitting ELITE For door weight up to 80kg Applications range : Built-in wardrobe, Dress room. etc. Max. door thickness : 30 mm Height adjustment : 5 mm Anti-drilling system Available in the heavy doors. Smooth movement. Upper roller, lower guide and tracks drilling patterns 6.18
Sliding Door Fittings For wooden doors Set From the floor Door Cat.No. 17mm, with installation manual For 2 doors 402.34.000 For 3 doors 402.34.001 33mm, with installation manual For 2 doors 402.34.002 For 3 doors 402.34.003 Packing : 1 set Track and individual components Length mm Material Finish Upper track 3.6 4.0 4.2 Aluminium Powder coating Lower track 3.6 Aluminium Powder coating 4.0 4.2 Packing 3.6 m 4.0 m 4.2 m 3.6 m 4.0 m 4.2 m Cat.No. 401.96.936 401.96.940 401.96.942 401.98.936 401.98.940 401.98.942 Upper running rail damper 50 kg ABS Light Grey 1 402.34.400 30 kg ABS Dark Grey 1 402.34.402 Lower guide rail damper - ABS Grey 1 402.34.401 Dust protection profile - Aluminium Silver 1.0 402.34.410 Handle security system - DC01 sp. 2,5 mm Nickel Plated 1 402.34.415 2 Doors components 3 Doors components 6.19
Sliding Door Fittings For wooden doors Upper and lower damper installation Upper damper Lower damper 6.20
Sliding Door Fittings For wooden doors Infront SDR-2 sliding door fittings For door weight up to 15kg Upper guide, Bottom running gear drilling pattern Upper guide Door thickness : Min.18mm Material : Track: Aluminum, Upper guide, Bottom running gear : Plastic Upper stopper : Plastic Smooth & easy sliding Bottom running gear Upper and bottom track drilling pattern Packing Upper & Bottom track, Aluminum Cut to size(meter) 405.92.799 Upper guide, Plastic 1 405.92.999 Bottom running gear, Plastic 1 405.92.798 Upper stopper, Plastic 1 405.92.300 6.21
Pivot Sliding Door Fittings Infront Pivot sliding For door weight up to 5.5 kg (max. 25 kg in combination with Parallelo synchro control) Concealed hinges and cruciform mounting plates installation Use concealed hinges with opening angle 95 and door offset max. 8 mm for mounting the door. Mount cruciform mounting plates to runner. Installation with mounting brackets on cabinet top or base Door height : 700 mm ( 1,800 mm in combination with Parallelo synchro control) Door thickness : 16-20 mm Material : Steel Finish : Galvanized Installation : Runners for screw fixing to cabinet top and base or to intermediate panel with mounting brackets Application and planning dimensions Wooden strut for connecting top and bottom guides must be supplied by customer Length = Internal cabinet height - 70 mm Set Runner length Dimension B Push-in depth mm mm mm 350 186 max. 244 408.07.350 400 236 max. 294 408.07.403 450 286 max. 344 408.07.458 500 336 max. 394 408.07.501 550 386 max. 444 408.07.556 600 436 max. 494 408.07.609 Packing : 1 pair Order reference Concealed hinges with opening angle of 95, cruciform mounting plates and cover caps for covering the cup drillings are not included in the set. Please order separately. To ensure that the door runs parallel, order Accuride 1316 Paralello synchro control. Guide Mounting bracket Installation instructions For 1 door 1 pair 4 pieces 1 piece Installation with mounting brackets to cabinet top and base Individual components for 35 mm drill hole Fittings to intermediate panel Material : Plastic Installation : Press fitting Colour Packing pieces White 1 or 100 or 1,000 340.41.702 Brown 1 or 100 340.41.104 6.22
Pivot Sliding Door Fittings Parallelo Synchro control system Set Suitable for Runner length 350 mm 408.05.356 Runner length 400 mm 408.05.409 Runner length 450 mm 408.05.454 Runner length 500 mm 408.05.507 Runner length 550 mm 408.05.552 Runner length 600 mm 408.05.605 Packing : 1 set Order reference The profile rod is not included in the set. Please order separately. Set components Toothed rail Pinion with srew mount Fixing screws M4 x 25 for screw mount Profile rod guide Installation instructions For 1 door 1 Pair 2 Pieces 4 Pieces 1 Piece 1 Piece Area of application : Ensures that the door runs parallel when using the Accuride 1319 pivot sliding door fitting Door weight : max. 25 kg Door height : max. 1,800 mm Door thickness : 16-20 mm Material : Toothed rail : Steel and plastic pinion and profile rod guide : Plastic Installation : For screw fixing Profile rod Concealed hinges and cruciform mounting plates installation Material : Steel Finish : Nickel plated Diameter : 8mm Profile rod length = internal cabinet height - 63mm Length mm 2000 226.67.205 Packing : 1 set Order reference Profile rods with fixed lengths of up to 6,000 mm are available from an order quantity of 100 pieces. Provide catalogue number and exact length when ordering a fixed length. Mount cruciform mounting plates to wooden strut. A distance of at least 122 mm must be maintained for fitting the concealed hinges. 6.23
Sliding Door Fittings Accessories Straightening fitting For sliding door fitting for wooden doors Depth Case B Depth Case B Plate holder Connecting plate Plate holder Case A Depth Depth Connecting plate Case A Adjustment Adjustment nut Ø3.5mm countersuk head screw with tap 10H spanner use Area of application : Prevents doors warping in either direction or straightens doors which have become warped. Door height : Max.2,200 or 2,600 mm Door thickness : Over 18mm Material : Steel, Plastic, Zinc alloy Finish : Black colour powder coating Colour : Black Length mm Door height mm 1,700 2,000 2,200 405.92.440 1,990 2,200 2,600 405.92.441 Packing : 1 set Depth 6.24
Sliding Door Fittings for Wooden Doors HAWA Junior 80/Z for Door weights up to 80 kg The two-way suspension allows the assembly and removal of the door leaves by two different methods: End installation : The assembly and removal of a door leaf is possible without removing an existing cover panel or pelmet. Front installation : The front cover panel or pelmet must be removable. Optional fixing method Side-fix angle profile Max. door thickness 42 mm Area of application : Features : Max. door weight : Min. door thickness : Adjustable vertically : Material : For 1- and 2-leaf sliding doors Two way suspension Height and side adjustable door leaves Track buffer with adjustable retainer Low wear and tear Quiet running action LGA tested to 100,000 cycles (EN1527). 80 kg per door leaf 26 mm 4 mm Running gear with plastic rollers Floor guide free of play : Plastic 6.25
Sliding Door Fittings for Wooden Doors HAWA Junior 80/Z Set For 1-Leaf Sliding Door 940.80.001 Note : Running and guide tracks are not included, please order separately. For 2-leaf sliding doors, please order 2 sets of 1-leaf sliding door fittings. Set Components For 1-leaf sliding door Running gear 2-wheel, M10 2 Pieces 940.80.012 Two way suspension with suspension bolt M10 and mounting screws 2 Pieces 940.80.022 Track buffer with retainer 1 Piece 940.80.041 Rubber wall buffer 1 Piece 940.40.051 Floor guide free of play 1 Piece 940.40.031 Height adjusting pin 1 Piece 940.40.091 Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity. Running Tracks and accessories Material Finish Length mm Running track Aluminium Clear anodised 6000 940.80.600.1 Guide channel Plastic Black 1300 940.41.130 Cover cap for running track Rubber Grey _ 940.80.060 6.26
Sliding Door Fittings for Wooden Doors HAWA Symmetric 80/Z for Door weights up to 80 kg Area of application : Features : Door width : Door thickness : Max. door weight : Min. door thickness : Adjustable vertically : Material : For 2-leaf sliding doors Simultaneous opening of 2 door leaves Two way suspension Height and side adjustable door leaves Low wear and tear Quiet running action 500-1200 mm 32-47 mm 80 kg per door leaf 26 mm 4 mm Running gear with plastic rollers Floor guide free of play : Plastic The two-way suspension allows the assembly and removal of the door leaves by two different methods: End installation : The assembly and removal of a door leaf is possible without removing an existing cover panel or pelmet. Front installation : The front cover panel or pelmet must be removable. 6.27
Sliding Door Fittings for Wooden doors HAWA Symmetric 80/Z Fitting Set For 2-Leaf Sliding Doors 940.81.009 Note : Running and guide tracks are not included, please order separately. Set Components For 1-leaf sliding door Guide roller 2 pieces 940.80.086 Serrated belt lock for manual systems 1 piece 947.00.055 Driver, laterally adjustable for manual systems 1 piece 947.00.056 Serrate d belt, 10 m 1 piece 947.00.037 Running gear 2-wheel, M10 4 pieces 940.80.012 Two way suspension with suspension bolt M10 and mounting sc rews 4 pieces 940.80.022 Track bu ffer with adjustable retainer 1 piece 940.80.041 Floor guide f ree of play 2 pieces 940.40.031 Rubber wall bu ffer 1 piece 940.40.051 Height adjusting pin 1 piece 940.40.090 Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity. The length of the serrated belt is calculated for a maximum door leaf width of 1200 mm. The serrated belts can be connected in the clamping piece. Running Tracks and accessories Material Finish Length mm Running track Aluminium Clear anodised 6000 940.80.600.1 Guide channel Plastic Black 1300 940.41.130 Cover cap for running track Rubber Grey _ 940.80.060 6.28
Sliding Door Fittings for Wooden doors HAWA Telescopic 80/2 for Door weights up to 80 kg Basic elements required 2 Sets of HAWA Junior 80/Z and 2 running tracks in addition to Telescopic 80/2 fitting set Area of application : For 2-leaf sliding doors Features : Parallel simultaneous opening of 2 door leaves Two way suspension Height and side adjustable door leaves Low wear and tear Quiet running action Max. door weight : 80 kg per door leaf Width of leaf : 500-1200 mm Door thickness : 32-47 mm Adjustable vertically : 4 mm Material : Side adjustable floor guide, free of play: Plastic Without guide channel With guide channel The two-way suspension allows the assembly and removal of the door leaves by two different methods: End installation : The assembly and removal of a door leaf is possible without removing an existing cover panel or pelmet. Front installation : The front cover panel or pelmet must be removable. STB = Sliding door width P = Panel overlap LMB = Opening width 6.29
Sliding Door Fittings for Wooden Doors HAWA Telescopic 80/2 Fitting Set For 2-Leaf Sliding Doors 940.81.007 Note : Running and guide tracks are not included, please order separately. Set Components For 2-leaf sliding doors Wide follower 1 Piece 947.00.050 Guide roller, Ø 36 mm, with long mounting plate 1 Piece 947.00.048 Guide roller, Ø 36 mm, with short mounting plate 1 Piece 947.00.049 Wall or ceiling bracket for serrated belt 1 Piece 947.00.053 Serrated belt, 2700 mm 1 Piece 947.00.054 Receiving plate for follower 1 Piece 947.00.051 Floor guide Confort 120, 1 panel 1 Piece 940.40.070 Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity. Please order additionally 2 sets of HAWA Junior 80/Z HAWA Junior 80/Z Fitting set 940.80.001 Running Tracks and accessories Material Finish Length mm Running track Aluminium Clear anodised 6000 940.80.600.1 Guide channel Plastic Black 1300 940.41.130 6.30
Sliding Door Fittings for Wood Doors HAWA Telescopic 80/3 for Door weights up to 80 kg Basic elements required 3 Sets of HAWA Junior 80/Z and 3 running tracks in addition to Telescopic 80/3 fitting set Without guide channel S (Door thickness) = 40-47 mm N = S - 26 mm Area of application : For simultaneous opening of 3 sliding doors to the left or right Features : Two way suspension Height and side adjustable door leaves Low wear and tear Quiet running action Max. door weight : 80 kg per door leaf Width of leaf : 500-1200 mm Door thickness : 40-47 mm Material : Side adjustable floor guide, free of play : Plastic With guide channel STB = Sliding door width P = Panel overlap LMB = Opening width 6.31
Sliding Door Fittings for Wood Doors HAWA Telescopic 80/3 Fitting Set For 3-Leaf Sliding Doors 940.81.008 Note : Running and guide tracks are not included, please order separately. Set Components For 3-leaf sliding doors Follower, narrow 1 947.00.052 Set Components Follower, wide 2 Pieces 947.00.050 Guide roller, Ø 36 mm with long mounting plate 2 Pieces 947.00.048 Guide roller, Ø 36 mm with short mounting plate 2 Pieces 947.00.049 Wall and ceiling bracket for serrated belt 1 Piece 947.00.053 Serrated belt, 2700 mm 2 Pieces 947.00.054 Receiving plate for wide follower 1 Piece 947.00.051 Bottom guide Confort 120, 1 panel 1 Piece 940.40.070 Guide Plate, with guide piece with zero clearance 14mm 1 Piece 943.04.030 Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity. Please order additionally 3 sets of HAWA Junior 80/Z HAWA Junior 80/Z Fitting set 940.80.001 Running Tracks and accessories Material Finish Length mm Running track Aluminium Clear anodised 6000 940.80.600.1 Guide channel Plastic Black 1300 940.41.130 6.32
Sliding Door Fittings for Wood Doors HAWA Telescopic 40/4 for Door weights up to 40 kg Basic elements required 4 Sets of HAWA Junior 80/Z and 2 running tracks in addition to Telescopic 40/4 fitting set Area of application : Features : Max. door weight : Width of leaf : Door thickness : Adjustable vertically : Material : For 4-leaf sliding doors Simultaneous opening of 4 door leaves Two way suspension Height and side adjustable door leaves Low wear and tear Quiet running action 40 kg per door leaf 500-800 mm 40-47 mm 4 mm Pulley guide : Plastic Side adjustable floor guide, free of play : Plastic The two-way suspension allows the assembly and removal of the door leaves by two different methods: S (Door thickness) = 40-47 N = S - 26 mm End installation : The assembly and removal of a door leaf is possible without removing an existing cover panel or pelmet. Front installation : The front cover panel or pelmet must be removable. STB = Sliding door width P = Panel overlap LMB = Opening width 6.33
Sliding Door Fittings for Wood Doors HAWA Telescopic 40/4 Fitting Set For 4-Leaf Sliding Doors 940.41.002 Note : Running and guide tracks are not included, please order separately. Set Components For 4-leaf sliding doors Follower with fixing screws 2 Pieces 947.00.050 Guide roller, Ø 36 mm, with long mounting plate 2 Pieces 947.00.048 Guide roller, Ø 36 mm, with short mounting plate 2 Pieces 947.00.049 Wall or ceiling bracket for serrated belt 2 Pieces 947.00.053 Serrated belt, 2700 mm 2 Pieces 947.00.054 Serrated belt, 10 m 1 Piece 947.00.037 Receiving plate for follower 2 Pieces 947.00.051 Floor guide Confort 120, 1 panel 2 Pieces 940.40.070 Guide roller for Junior 80 track 2 Pieces 940.80.086 Serrated belt lock for manual systems 1 Piece 947.00.055 Driver, laterally adjustable for manual systems 1 Piece 947.00.056 Note : Catalogue numbers refer to one piece. When ordering individual components, please specify the required quantity. Please order additionally 4 sets of HAWA Junior 80/Z HAW A Junior 80/Z Fitting set 940.80.001 Running Tracks and accessories Material Finish Length mm Running track Aluminium Clear anodised 6000 mm 940.80.600.1 Guide channel Plastic Black 1300 940.41.130 6.34
Sliding Door Fittings accessories for HAWA Sliding Door Fittings Smuso AD Soft Close for HAWA Junior 80 For Door Weights up to 80 kg Area of application : Max. door weight : Installation : For 1-leaf and 2-leaf sliding doors Suitable for wood doors: HAWA Junior 80/Z, 80/B Suitable for glass doors: HAWA Junior 80/GL, 80/GP, 80/GV 80 kg per door leaf For connection to running gear Smuso AD Soft close, single leaf Smuso AD Soft close, double leaf bi-parting Häele Smuso AD soft close Häele stopper with catch HAWA track buffer Smuso AD soft close for HAWA Junior 80 systems 940.80.043 Note When using the double-leaf soft close together with the Junior 80 sets please note the following: The stopper supplied with the Junior 80 set is not required in this case. We recommend ordering individual components instead of the complete set for cost reasons. 6.35
Sliding Door Fittings accessories for HAWA Sliding Door Fittings HAWA-Junior 80 SoftMove Area of application : Mechanism : Max. door weight : Installation : For 1 - leaf and 2 - leaf sliding doors Suitable for wood doors: Hawa Junior 80/Z, 80/B Suitable for glass doors; Hawa Junior 80/GP, 80/G, 80/GV, 80/GL, 80/GS High-class hydraulic metal damper with a diameter of 14 mm guarantees high quality and a long life-cycle Continuous gentle deceleration and closing with no door spring-back 80 kg per door leaf For connection to running gear, Invisibly integrated in the top track One-sided damping 690 mm Two-sided damping 1030 mm Cat.No. HAWA-Junior 80 SoftMove 940.80.046 6.36
Sliding Door Fittings accessories for HAWA Sliding Door Fittings HAWA Junior Side Fix Angle Profile For HAWA Junior 40, 80 and 120 Running Tracks HAWA Angle Bracket For Wood Sliding Door Applications HAWA Junior 40 Features : Max. weigh t: Material : For wall mounted sliding door applications Elegant design with concealed mounting Continuous profile for simple leveling Easy and fast to install No drilling of running track and angle profile No additional support structure required Can be used for wood or glass sliding doors 40 kg, 80 kg or 120 kg per door leaf Angle profile: Aluminium clear anodised Cover caps: Plastic grey HAWA Junior 80 Easy and fast installation of angle profile and running track HAWA Junior 120 6.37
Sliding Door Fittings accessories for HAWA Sliding Door Fittings For HAWA Junior 40 Running Tracks 1 Set For HAWA Junior 80 Running Tracks 1 Set For HAWA Junior 120 Running Tracks 1 Set Note : Running tracks and fittings sets have to be ordered separately 6.38
Sliding Door Fittings accessories for HAWA Sliding Door Fittings Bottom Guides and Channels General purpose guide plate, steel galvanised with plastic slider 13 mm, play-free Packing 1 Piece 943.04.030 Guide with plastic slider 13 mm and suspension block, play-free. For use with multi purpose suspension and retainer profile 1 Piece 946.12.060 Multi-purpose suspension and retainer profile predrilled, aluminium clear anodised For use with plastic slider 13 mm 6000 mm 946.08.651 cut to size 946.14.990 Bottom guide channel, predrilled 20 x 20 x 3 mm Aluminium clear anodised 6000 mm M 407.80.901 Bottom guide channel, predrilled 20 x 28 x 3 mm Brass For use with plastic slider 13 mm 6000 mm Piece 942.50.600 cut to size 942.50.999 Bottom guide channel, undrilled 24 x 24 mm Aluminium clear anodised For use with plastic slider 13 mm 6000 mm Piece 940.81.600 Cut to size 940.81.999 Stop bumper for 940.81.600 and 940.81.999 1 Piece 940.80.051 6.39
Sliding Door Fittings accessories for HAWA Sliding Door Fittings Bottom Guides and Channels Guide plate steel galvanised with plastic slider 9 mm. For use with bottom guide channel 13 x 14 mm Packing 1 943.04.030 Bottom guide channel, brass, predrilled 13 x 14 x 1.5 mm For use with plastic slider 9 mm 6000 mm 407.69.860 cut to size 407.69.899 6.40
Sliding Door Fittings For Wooden Doors EKU Porta 45/H for door weights up to 45 kg Ceiling installation and wall mounting Bottom Guide Standard floor guide Wall mounting floor guide Area of Application : For 1 - leaf and 2 - leaf sliding doors Adjustable vertically : 3 mm Max. door weight : 45 kg Max. door heigh t: 2200 mm Max. door width : 1000 mm Door thickness : 30-40 mm Side-adjustable floor guide Section Trolley, track buffer and floor guide 6.41
Sliding Door Fittings For Wooden Doors EKU Porta 45/H Set Finish 1 Fitting Set with 2000 mm Running track For 1 - leaf sliding door Running track blank 940.54.000 1 Fitting Set without Running Track GFor 1 - leaf sliding door 940.54.001 Note : For 2 - leaf sliding doors, please order 2 sets of 1 - leaf sliding door fittings Set Components For 1-leaf sliding door Running Gear,4-wheel 2 940.54.012 Suspension screw, galvanized 2 940.54.021 Hexagon ribbed nut, M8 Suspension, galvanized 2 2 940.54.022 940.54.020 Stop with retention stopper 1 940.54.042 Wall Buffer, 18 x 10 mm, Rubber, Black 9 940.60.051 Floor Guide, adjustable, plastic 940.60.070 Note : Fixing element is supplied Running Tracks and accessories Note : Install the wall fixing element at intervals of 500 mm. Material Finish Length mm Running Track Aluminium Blank 1700 940.54.917 2000 940.54.920 2500 940.54.925 6000 940.54.960 Cut to size 940.54.999 Wall mounting bracket with fixing element, for running track with bolts and nuts Steel Zinc plated 45 940.54.060 Wall mounting floor guide Steel Zinc plated 81,5 941.00.034 6.42
Sliding Door Fittings For Wooden Doors EKU Porta 60/100 H for door weights up to 60 kg, 100 kg Wall mounting floor guide Ceiling installation and wall mounting Area of Application : For 1 - leaf and 2 - leaf sliding doors Adjustable vertically : 3 mm Max. door weight : 60 kg or 100 kg per leaf Max. door height : 2700 mm Max. door width : 1600 mm Door thickness : 30-40 mm Option : Damping system available Bottom Guide Standard floor guide Wall mounting floor guide Continuously adjustable hold-open force Side-adjustable floor guide Section Trolley,track buffer and floor guide 6.43
Sliding Door Fittings For Wooden Doors EKU Porta 60/100 H Set Door weight Finish 1 Set without running track For 1 - leaf sliding door 60 940.60.111 100 941.00.111 Note : For 2 - leaf sliding doors, please order 2 sets of 1 - leaf sliding door fittings Set Components Running gear, 4-wheel with suspension screw, Hexagon ribbed nut For 1 - leaf door 2 Pieces Suspension, galvanized 2 Pieces Stop with retention stopper, Floor Guide, adjustable, plastic 2 Pieces 1 Piece Fixing Element 1 Piece Running Tracks and accessories Note : Install the wall fixing element at intervals of 500mm. Material Finish Length Cat. No Running Track, predrilled Aluminum Blank 1500 941.00.150 1700 941.00.170 2000 941.00.200 2500 941.00.250 6000 941.00.602.02 Silver anodized 2000 941.00.205 2500 941.00.255 6000 941.00.605 Combi-running track, predrilled, for wall and ceiling mounting, 39 x 41 mm (W x H) Aluminum Blank 2000 941.00.203 2500 941.00.253 3500 941.00.353 6000 941.00.603 Clip-on fascia for running track, 60 mm (H) Aluminum Silver anodized 2500 941.12.425 3500 941.12.435 6000 941.12.460 Clip component for timber and aluminum fascia, predrilled Aluminum Blank 97 940.60.065 Wall mounting bracket with fixing element, for running track with bolts and nuts Steel Zinc plated 45 940.54.060 Track-connector - U32 x 35 x (120) x 2.5 mm Steel Zinc plated 120 941.00.990 Wall mounting floor guide Steel Zinc plated 81,5 941.00.036 6.44
Sliding Door Fittings For Wooden Doors EKU Porta 60/100 HC for door weights up to 60 kg, 100 kg Wall mounting Bottom Guide Standard floor guide Wall mounting floor guide Area of Application : For 1-leaf and 2-leaf sliding doors Adjustable vertically : 3 mm Max. door weight : 60 kg or 100 kg per leaf Max. door height : 2700 mm Max. door width : 1600 mm Door thickness : 30-40 mm Option : Damping System available Section Trolley, track buffer and floor guide Continuously adjustable hold-open force Side-adjustable floor guide Clip component For wood For aluminum, side cover in plastic Wall mounting floor guide For aluminum, side cover is aluminum 6.45
Sliding Door Fittings For Wooden Doors EKU Porta 60/100 HC Set Version Door Weight kg Finish 1 Set without running track For 1 - leaf sliding door Version C 60 940.60.111 Version D 100 941.00.111 Note : For 2-leaf sliding doors, please order 2 sets of 1-leaf sliding door fittings Set Components Running gear,4-wheel with suspension screw, hexagon ribbed nut For 1-leaf Pieces Suspension, galvanized Pieces Stop with retention stopper Pieces Floor guide, adjustable, plastic Piece Fixing element 1 Set Soft closing damping device for Porta 60/100H and Divido 100/H 6.46
Sliding Door Fittings For Wooden Doors Running Tracks and accessories Running Track, pre-drilled 47.5 x 31 mm (W x H) Aluminum Silver anodized 2500 940.60.825 3500 940.60.835 6000 940.60.860 Clip-on fascia for running track, 60 mm (H) Aluminum Silver anodized 2500 941.12.425 3500 941.12.435 6000 941.12.460 Clip component for wood and aluminum fascia, predrilled Aluminum Blank 97 940.60.065 Material Finish Length mm Limiter for wooden panel Steel Zinc plated 940.60.093 Panel end component set, aluminium anodized, incl. limiter, for aluminium panel End cap set, plastic anthracite, incl. limiter, for aluminium panel Aluminum Silver anodized 940.60.066 Plastic Black 940.60.067 Wall mounting floor guide Steel Zinc plated 81,5 941.00.036 45/60/100H - 60/100HC - 60/100H - 6.47
Sliding Door Fittings For Wooden Doors Alu 80/a and Softmaster V2 Alu 80/a For door weight up to 80 kg Installation Running gear and bottom Guide Area of application : For 1-leaf and 2-leaf sliding doors Version : Secure, non-captive guidance by angled running surfaces, self-cleaning running track Adjustment facility : Door height adjustable Installation : Suspension fitting with screwed-on support flange Door weight : 80 kg per door Quiet running action Note Softmaster V2: When the sliding door runs into pocket, just a slight tip in the edge will make the door come out a little bit so access to flush handle is possible. By Softmaster Alu 80/a it is really important to keep 20 mm distance between from wall and door for optimum operation. 6.48
Sliding Door Fittings For Wooden Doors Alu 80/a Set For 1 Sliding door, without running track Note : For 2 sliding doors order 2 sets. Alu 80/a Softmaster V2 Alu 80/a 940.84.001 940.84.003 Set comonents For 1 Door Suitable for Running gear with 4-plastic rollers Pieces Alu 80/a 940.84.013 Softmaster V2 Alu 80/a Suspension, screw- fixing Pieces Alu 80/a 940.40.020 Piece Softmaster V2 Alu 80/a Suspension, height adjustable, with M8 bolt Piece Softmaster V2 Alu 80/a 940.46.020 Damping device Softmaster Piece Softmaster V2 Alu 80/a 940.84.040 Running track stopper with rubber buffer Piece Softmaster V2 Alu 80/a 940.84.043 Running track stopper with holding force Pieces Alu 80/a 940.84.041 Wall buffer Piece Alu 80/a 940.46.051 Bottom guide Piece Alu 80/a 940.40.030 Softmaster V2 Alu 80/a Order Reference : Catalogue numbers refer to 1 piece. Please specify required quantity when ordering individual components. Tracks and accessories Material Finish Length mm Running track, predrilled Aluminum Blank 1650 940.84.165 2000 940.84.200 2500 940.84.250 3500 940.84.350 6000 940.84.600 nach Ma 940.84.999 Wall fixing bracket 27.5 mm Steel Chrome plated 940.84.071 Wall fixing bracket 40 mm Steel Chrome plated 940.84.072 6.49
Sliding Door Fittings For Wooden Doors Linear back - running device For door weight up to 50 kg Closing mechanism 941.35.050 Set comonents Trolley to fix to door For 1-door Piece Trolley to fix to running track Piece Fixing component for expanding Kevlar in the running track Piece Fixing component with breaking system in the running track Piece Area of application : For 1-sliding door Door weight : 50 kg Useable with : Alu 80/a Fixing component for expanding Kevlar onto door Stopper, concealed mounting Expanding special cable Piece Piece Piece Linear closing device in tension Installation Wall fixing Ceiling fixing Note For a later revision work of the backward-movement after mounting the fittings, you necessarily need a chamber to open, because the expander-cable is an expendable part which has to check and adjust in constant intervals. The assembly instruction describes the installation of the backward-movement for a right closing door. For a left closing door you have to mount the return-parts inversely. The backward-movement can only be used with the sliding door fitting Alu/80. 6.50
Flush Pull Handles for Sliding Doors For wood doors Flush pull handle Version Dim. A mm Dim. B mm Dim. C mm Without aperture Stainless steel, quality 1.4301, matt brushed 50 40 12 151.38.011 60 50 12 151.38.012 80 62 14 151.38.013 Version Stainless steel (quality 1.4305), matt brushed Without aperture 152.51.001 Version Without aperture Dim. A mm Dim. B mm Dim. C mm Dim. D mm Dim. E mm Stainless steel (quality 1.4305), matt brushed 102 50 90 39 10 152.51.002 175 60 154 39 17 152.51.003 Closed-type Open-type Material Finish Function Stainless Steel Matt Closed - type 902.00.366 Open - type 902.00.740 Packing : 1 pc 6.51
Flush Pull Handles for Sliding Doors For wood doors Flush pull handle Material : Stainless Steel, quality 1.4305 Finish : Matt brushed Delivery : Fixing screws are included Dim A mm Dim B mm Dim C mm 59 40 12 152.50.001 69 50 12 152.50.002 Packing : 1 or 10 pcs Material : Stainless Steel, quality 1.4305 Finish : Matt brushed Delivery : Fixing screws are included Dim A mm Dim B mm Dim C mm Dim D mm Dim E mm 140 45 95 30 10 152.52.001 Packing : 1 or 10 pcs Material : Stainless Steel, quality 1.4305 Finish : Matt brushed Delivery : Fixing screws are included Dim A mm Dim B mm Dim C mm Dim D mm Dim E mm 185 70 154 39 17 152.52.002 Packing : 1 or 10 pcs 6.52
Flush Pull Handles for Sliding Doors For wooden doors Flush pull handle Closed-type Open-type Material Finish Function Stainless Steel Matt Closed - type 902.00.382 Open - type 902.00.720 Packing : 1 pc Closed-type Open-type Material Finish Function Stainless Steel Matt Closed - type 902.00.386 Open - type 902.00.730 Packing : 1 pc Closed-type Open-type Material Finish Function Stainless Steel Matt Closed - type Open - type 902.00.370 902.00.750 Packing : 1 pc 6.53
Flush Pull Handles for Sliding Doors For wooden doors Flush pull handle Material Finish Zinc alloy Chrome plated matt 151.35.208 Packing : 20 pcs Material Handle : Zinc alloy Back : Steel Packing : 25 pcs Finish Nickel matt Black matt 151.09.600 Installation : Fixing without screw, glue fixing Material Brass Packing : 1 or 50 pcs Finish Chrome polished Nickel matt 151.98.200 151.98.600 Material : Handle: Zinc alloy, Inset: Leather Finish/colour Handle: Stainless steel colour ed Inset: Dark brown 151.96.030 Packing: 1 or 25 pcs 6.54
Flush Pull Handles for Sliding Doors For wood doors Flush pull handle Bore dimensions Material Finish Version Function Zinc alloy Satin Nickel Without spring Hold in open 161.07.720 With spring Hold in close 161.07.620 Packing: 1, 12 pcs Bore dimensions Material Finish Version Function Zinc alloy Satin Nickel Without spring Hold in open 161.07.730 With spring Hold in close 161.07.630 Packing: 1, 12 pcs 6.55
Sliding Door Fittings For all - glass doors Infront EKU Clipo 15 GC and GCG For door weights up to 15 kg for straight or curved doors Single top running track Double top running track The single or double top running track can be installed by screw fixing into groove or clamping into groove with swivel lugs 2.5 Door height : Door width : For glass door thickness : Material : Running gear : Running gear gui - ded by : Door stop : Installation : max. 1,200 mm max. 800 mm 6 mm Plastic running gear, guide and cover cap Top running, 1 roller Friction bearing mounted plastic roller, steel axle Top stopper, with retainer for sliding into single or double top running track Running gear for press fitting into drill hole, front plate for clipping on, without tools (quick fixing system), guide for press fitting into drill hole Installation of single running track with curved doors With radiuses of min. 1,600 mm: Press-fit single running track in pre-milled groove. Bottom guide installation Running gear installation 6.56
Sliding Door Fittings For all - glass doors Set Cat. No. Model GC, for 2 doors, with installation instructions 405.82.241 Model GCG, for 2 doors, with installation instructions 405.82.248 Packing : 1 set Order reference Please order guide and running track separately Set components(individual parts) Running gear for press fitting Suitable for For 2 doors Material Finish/colour GC and GCG 4 Plastic Anthracite Cover cap with clip GC 4 Plastic Chrome plated matt Cover cap with clip GCG 4 Plastic Gold coloured polished Track sup port GC and GCG 4 Plastic Light grey Door stopper with retaining sprino, for top running tracks GC and GCG 4 Plastic Grey Guide, for uide for press fitting GC 2 Plastic Light grey Guide, for press fitting GCG 2 Plastic Brown Tracks and individual components Length m Cainet top thickness mm Material Finish Packing m Single top running track, for screw fixing into groove, with chipboard screws with countersunk head Ø 2.5 mm 2.5 min. 25 Aluminium Bright 2.5 405.87.002 3.5 3.5 405.87.003 Single top running track, for clamping into groove, with swivel lugs, not suitable for hardwood 2.5 min. 19 Aluminium Bright 2.5 3.5 3.5 405.86.002 405.86.003 Double top running track, for screw fixing with chipboard screws with countersunk head Ø 2.5 mm 2.5 min. 25 Aluminium Bright 2.5 3.5 3.5 405.90.002 405.90.003 Double top running track, for clamping into groove, with swivel lugs, not suitable for hardwood 2.5 min. 19 Aluminium Bright 2.5 3.5 3.5 405.89.002 405.89.003 Order reference Following fixed curve radiuses (R) for top single running track are available on request: 6.57
Sliding Door Fittings For all - glass doors Infront EKU Clipo 15 GK For door weights up to 15 kg, for sliding doors without drill holes in glass doors 2.5 Single top running track Double top running track The single or double top running track can be installed by screw fixing into groove or clamping into groove with swivel lugs Door height : Door width : For glass door thickness : Height adjustment : Material : Running gear : Running gear guided by : Door stop : Installation : Top glass fixing profile max. 1,200 mm max. 800 mm 6 mm 1 mm at running gear using screw Plastic running gear and guide, steel axle Top running, 1 roller Friction bearing mounted, plastic roller Top stopper, with retainer for sliding into single or double top running track Running gear for inserting and screw fixing, guide for press fitting into drill hole Bottom guide installation Top running gear and glass fixing profile Installation Glass fixing profile length = glass door width - 6mm 6.58
Sliding Door Fittings For all - glass doors Set For 2 doors, with installation instructions Packing : 1 set Order reference Please order glass fixing profile and running track separately 405.82.272 Set components(individual parts) For 2 doors Material Colour Packing pieces Running gear, for inserting and screw fixing in top glass fixing profile, height adjustable 1 mm 4 Plastic Anthracite 1, 100 405.83.936 Track sup port 4 Plastic Light grey Door stopper, with retaining spring, for top running tracks 4 Plastic Grey 1, 100 405.83.132 Guide, for press fitting 2 Plastic Light grey 1, 50 405.83.122 Tracks and individual components Length m Cabinet top thickness mm Material Finish Packing m Single top running track, for screw fixing into groove, with chipboard screws with countersunk head Ø 2.5 mm Single top running track, for clamping into groove, with swivel lugs, not suitable for hardwood Double top running track, for screw fixing with chipboard screws with countersunk head Ø 2.5 mm Double top running track, for clamping into groove, with swivel lugs, not suitable for hardwood 2.5 min. 25 Aluminium Bright 2.5 405.87.002 3.5 3.5 405.87.003 2.5 min. 19 Aluminium Bright 2.5 405.86.002 3.5 3.5 405.86.003 2.5 min. 25 Aluminium Bright 2.5 405.90.002 3.5 3.5 405.90.003 2.5 min. 19 Aluminium Bright 2.5 405.89.002 3.5 3.5 405.89.003 Top glass fixing profile, for glue fixing 2.5 Aluminium Silver 2.5 405.78.902 3.5 coloured anodized 3.5 405.78.903 Order reference Order UHU Plus endfest 300 epoxy resin adhesive for gluing the glass fixing profile to glass door 6.59
Sliding Door Fittings For all - glass doors Infront EKU Clipo 15 GKS For door weights up to 15 kg, for sliding doors without drill holes in glass doors 2.5 Installation of bottom glass fixing profile with brush seal Door height : max. 1,200 mm Door width : max. 800 mm For glass door thickness: 5-6 mm Height adjustment : 1 mm at running gear using screw Material : Plastic running gear and guide Door stop : Top stopper, with retainer for sliding into single top running track Installation : Running gear for inserting and screw fixing, guide for press fitting into drill hole Top and bottom glass fixing profile Top running gear and glass fixing profile Installation Glass fixing profile length = glass door width - 6mm 6.60
Sliding Door Fittings For all - glass doors Set For 2 doors, with installation instructions Packing : 1 set Order reference Please order top running track, glass fixing profile and brush seal separately. Cat. No. 405.82.281 Set components(individual parts) Running gear, for inserting and screw fixing in top glass fixing profile, height adjustable 1 mm For 2 doors Material Colour 4 Plastic Anthracite Track sup port 4 Plastic Light grey Top door stopper, with retaining spring 4 Plastic Grey Guide, for press fitting End cap, for bottom glass fixing profile with fixing screw 2 Plastic Anthracite 4 Plastic Grey Tracks and individual components Single top running track, for screw fixing beneath cabinet top with chipboard screws with countersunk head Ø 2.5 mm Single top running track, for screw fixing into groove, with chipboard screws with countersunk head Ø 2.5 mm Single top running track, for clamping into groove, with swivel lugs, not suitable for hardwood Double top running track, for screw fixing with chipboard screws with countersunk head Ø 2.5 mm Double top running track, for clamping into groove, with swivel lugs, not suitable for hardwood Top glass fixing profile, for glue fixing Length m Cabinet top thickness mm Material Finish Packing m 2.5 min. 19 Aluminium Silver coloured 2.5 405.81.002 3.5 anodized 3.5 405.81.003 2.5 min. 25 Aluminium Bright 2.5 405.87.002 3.5 3.5 405.87.003 2.5 min. 19 Aluminium Bright 2.5 405.86.002 3.5 3.5 405.86.003 2.5 min. 25 Aluminium Bright 2.5 405.90.002 3.5 3.5 405.90.003 2.5 min. 19 Aluminium Bright 2.5 405.89.002 3.5 3.5 405.89.003 2.5 Aluminium Silver coloured 2.5 405.78.902 3.5 anodized 3.5 405.78.903 Bottom glass fixing profile, for glue fixing 2.5 Aluminium Silver coloured 2.5 405.80.002 3.5 anodized 3.5 405.80.003 Brush seal, for sliding into bottom glass fixing profile 10.0 Artificial hair Grey 10.0 405.80.500 6.61
Sliding Door Fittings For all - glass doors Infront EKU Clipo 15 GKK For door weights up to 15 kg, For sliding doors without drill holes in glass doors Top running track installation Door height : max. 1,200 mm Door width : max. 800 mm For glass door thickness : 5-6 mm Height adjustment : 1 mm at running gear using screw Material : Plastic running gear and guide Running gear : Top running, 1 roller Running gear guided by: Friction bearing mounted plastic roller, steel axle Door stop : Top stopper, with retainer for sliding into double top running track Installation : Running gear for screw fixing, guide for press fitting into drill hole Top and bottom glass fixing profile Double top running track, for groove mounting 2 Single top running tracks, for screw fixing beneath cabinet top 2.5 Top running gear and glass fixing profile Installation The top running tracks can be installed by screw fixing beneath cabinet top or into groove clamping into groove with swivel lugs Bottom glass fixing profile installation Glass fixing profile length = glass door width - 6mm 6.62
Sliding Door Fittings For all - glass doors Set For 2 doors, with installation instructions Packing : 1 set Order reference Please order top running track, glass fixing profile and brush seal separately. Cat. No. 405.82.282 Set components(individual parts) Running gear, for inserting and screw fixing in top glass fixing profile, height adjustable 1 mm For 2 doors Material Colour Packing pieces 4 Plastic Anthracite 1, 100 405.83.936 Track sup port 4 Plastic Light grey Door stopper, with retaining spring, for top running tracks 4 Plastic Grey 1, 100 405.83.132 Guide, for press fitting 2 Plastic Anthracite 1, 50 405.83.104 Bottom cover for glass fixing profile, with fixing screw 4 Plastic Anthracite 1, 100 405.78.990 Tracks and individual components Double top running track, for screw fixing with chipboard screws with countersunk head Ø 2.5 mm Double top running track, for clamping into groove with swivel lugs, not suitable for hardwood Single top running track, for screw fixing beneath cabinet top with chipboard screws with countersunk head Ø 2.5 mm Length m Cabinet top thickness mm Material Finish Packing m 2.5 Aluminium Bright 2.5 405.90.002 3.5 3.5 405.90.003 2.5 Aluminium Bright 2.5 405.89.002 3.5 3.5 405.89.003 2.5 min. 19 Aluminium Silver 2.5 405.81.002 3.5 coloured 3.5 405.81.003 anodized Top and bottom glass fixing profile, for glue fixing 2.5 Aluminium Silver 2.5 405.78.902 3.5 coloured 3.5 405.78.903 anodized Order reference Order UHU Plus endfest 300 epoxy resin adhesive for gluing the glass fixing profile to glass door 6.63
Sliding Door Fittings For all - glass doors Vorfront EKU Regal B 25 G VF For door weights up to 25 kg, without drill hole in glass door Door height : max. 1,800 mm Door width : max. 1,200 mm for glass door thickness : 4-6 mm Height adjustment : 2 mm on running gear using eccentric Material : Steel running gear and guide Running gear : Top and bottom running, 1 roller Running gear guided by : Plastic coated roller, steel axle Door stop : Top and bottom stopper, with retainer for sliding into single running track and guide track Installation : Connecting spacer plate for glue fixing, running gear and guide for screw fixing Running gear, top running Installation dimensions Running gear, bottom running Single running and guide track installation Running gear and guide bonding position With fixing clips With connecting bolt and Minifix connector housing 6.64
Sliding Door Fittings For all - glass doors Set For 1door, with installation instructions Packing : 1 set Order reference Please order guide and running track separately. Order gluing template and UHU Plus endfest 300 epoxy resin adhesive for gluing the connecting spacer plate to the glass door. Set components(individual parts) Running gear, with friction bearing height adjustable 3 mm For 1 door Material Finish/colour 2 Steel Nickel plated 405.55.412 Connecting spacer plate, for gluing to door 4 Zinc alloy Chrome plated Door stopper, with retaining spring, for top running tracks 4 Plastic Grey Guide 2 Steel Nickel plated Fixing 22 Plastic Grey Safety clip 4 Zinc alloy Bright End cap, for single running and guide track 4 Plastic Grey Mounting jig 1 Plastic Black Tracks and individual components Single running track, for clipping onto fixing clips or push fitting with connecting bolts Length Material Finish/colour Packing m 2.5 Aluminium Silver coloured 2.5 m 405.69.902 3.5 anodized 3.5 m 405.69.903 Single running track, for clipping onto fixing clips or push fitting with connecting bolts 2.5 Aluminium Silver coloured 2.5 m 405.61.902 3.5 anodized 3.5 m 405.61.903 Connecting bolts, for fixing running and guide tracks Centre door stopper for cabinets with front running, centre door for engaging in centre position Zinc alloy Bright 1 or 100 pieces 405.45.000 Plastic Grey 1 or 5 pieces 405.67.070 Order reference The tracks are also available in fixed lengths with appropriate purchase quantities. 6.65
Sliding Door Fittings For all - glass doors Vorfront EKU Regal B 25 GA VF For door weights up to 25 kg Door height : max. 1,800 mm Door width : max. 1,200 mm For glass door thickness : 6 mm Height adjustment : 2 mm on running gear using eccentric Material : Steel running gear and guide Running gear : Top or bottom running, 1 roller Running gear guided by : Plastic coated roller, steel axle Door stop : Top and bottom stopper, with retainer for sliding into single running track and guide track Installation : Front plate for gluing and press fitting into drill hole, running gear and guide for screw fixing Running gear, top running Running gear and guide bonding position Running gear, bottom running Single running and guide track installation Installation dimensions With fixing clips With connecting bolt and Minifix connector housing 6.66
Sliding Door Fittings For all - glass doors Set For 1door, with installation instructions Packing : 1 set Order reference Please order guide and running track separately. Order gluing template and UHU Plus endfest 300 epoxy resin adhesive for gluing the connecting spacer plate to the glass door. 405.55.312 Set components(individual parts) Running gear, with friction bearing height adjustable 3 mm For 1 door Material Finish/colour 2 Steel Nickel plated Front plate, for glue fixing, for glass doors wite drill hole Door stopper, with retaining spring 4 Zinc alloy Chrome plated matt 4 Plastic Grey Guide 2 Steel Nickel plated Fixing clip Safety clip 22 Plastic Grey 4 Zinc alloy Bright End cap, for single running and guide track 4 Plastic Grey Mounting jig 1 Plastic Black Tracks and individual components Single running track, for clipping onto fixing clips or push fitting with connecting bolts Length Material Finish Pac king m 2.5 Aluminium Silver coloured 2.5 m 405.69.902 3.5 anodized 3.5 m 405.69.903 Single running track, for clipping onto fixing clips or push fitting with connecting bolts 2.5 Aluminium Silver coloured 2.5 m 405.61.902 3.5 anodized 3.5 m 405.61.903 Connecting bolts, for fixing running and guide tracks Centre door stopper for cabinets with front running, centre door for engaging in centre position Zinc alloy Bright 1, 100 405.45.000 Plastic Grey 1, 5 405.67.070 Order reference The tracks are also available in fixed lengths with appropriate purchase quantities. 6.67
Sliding Door Fittings Accessories - gentle closing Smuso SD 15 / SD 25 Soft closing mechanism For sliding door fittings, with self closing mechanism Follower bracket For EKU Regal B Installation Area of application : For light-weight and medium-weight sliding doors, 0-15 kg or 16-25 kg Material : Plastic Colour : Light grey Installation : For recess mounting or screw fixing to cabinet base Note Soft closing mechanism suitable for sliding doors EKU Regal B Clipo 15, front door Clipo 15, rear door Door weight kg Smuso SD 15 soft closing mechanism 0-15 405.12.015 Smuso SD 25 soft closing mechanism 16-25 405.12.025 Packing: 1 or 20 pieces Follower bracket, pre-mounted 1 = Soft closing mechanism 2 = Follower bracket 3 = Sliding door 4 = Sliding door fitting 5 = Cabinet side panel Cover cap For Smuso SD 15 / SD 25 soft closing mechanism Material : Plastic Installation : For clipping onto soft closing mechanism Suitable for : Left and right Cover cap for Smuso 15/SD 25 soft closing mechanism Packing: 1 or 20 pieces Colour Grey 405.12.250 Silver coloured 405.12.290 Area of application : For cabinets with 1-leaf sliding doors with EKU Regal B sliding door fitting Material : Steel Finish : Galvanized Follower bracket for EKU Regal B 405.12.302 Packing: 1 piece 6.68
Sliding Door Fittings Accessories - gentle closing Follower bracket For Clipo 15, front door Follower bracket For Clipo 15, rear door Installation Installation Follower bracket, pre-mounted 1 = Soft closing mechanism 2 = Follower bracket 3 = Sliding door 4 = Sliding door fitting 5 = Cabinet side panel Follower bracket, pre-mounted 1 = Soft closing mechanism 2 = Follower bracket 3 = Sliding door 4 = Sliding door fitting 5 = Cabinet side panel Follower bracket installation Area of application : For front sliding door on cabinets with Clipo 15 sliding door fitting Material : Steel Finish : Galvanized Follower bracket for Clipo 15, front door 405.12.301 Packing: 1 piece Follower bracket installation Area of application : For rear sliding door on cabinets with Clipo 15 sliding door fitting Material : Steel Finish : Galvanized Follower bracket for Clipo 15, rear door 405.12.300 Packing: 1 piece 6.69
Sliding Door Fittings Accessories - gentle closing Smuso CD 25/CD 50 Soft closing mechanism For sliding door fittings, with self closing mechanism Spacer plate Area of application : For sliding door weights up to 50 kg Material : Plastic Colour : Light grey Installation : For screw fixing beneath or to the cabinet top Mounting : For DIN left hand and DIN right hand use Note Soft closing mechanism suitable for sliding doors Vorfront Silent-VF 40 Mixfront Rotula 40/75 Vorfront Rotula 50 Area of application For door weights up to 25 kg 405.11.106 For door weights up to 50 kg 405.11.107 Packing: 1 or 20 pieces Material : Plastic Colour : Grey Installation : For screw fixing beneath cabinet top Mounting : For DIN left hand and DIN right hand use Spacer plate 405.11.194 Packing: 1 or 250 pieces 6.70
Slido Sliding Door Fittings - For glass doors HAWA Junior 80/GL for Door weights up to 80 kg GH = Glass height STH = Panel height Features: Max. door weight : Adjustment : Glass thickness : Profile height : Material : For 1- and 2-leaf sliding doors For unobtrusive, straight-running sliding glass doors Efficient, cost-effective and highly reliable Rattle-proof bottom guides ensure quiet running and keep doors steady in the presence of drafts Easy to install hardware and absolutely dependable Aluminium cover plates for the slim glass retention profile fit easily, using rubber clips. Track stop with adjustable retainer Vertical adjustment without removing the glass door Can be combined with HAWA Toplock and wall joint profile, and HAWA Junior angle profile for wall fixing Positive-fitting glass fixing for maximum safety and reliability 80 kg per door leaf 3 mm vertically 8 and 10 mm 65 mm Running gear with nylon rollers Floor guide free of play: Aluminium with plastic insert Glass door preparation GB = Glass width GH = Glass height STB = Panel width 6.71
Slido Sliding Door Fittings - For glass doors HAWA Junior 80/GL Fitting Set For 1- Leaf Sliding Door 940.81.005 Note : Running and guide tracks are not included, please order separately. For 2-leaf sliding doors, please order 2 sets of 1-leaf sliding door fittings. Set Components For 1-leaf sliding door Running gear 2-wheel, M10 2 940.80.012 Suspension plate with hanger bolt M10 2 940.80.017 Track buffer with retainer 2 940.80.041 Glass retainer profile 240 mm 2 943.31.020 Cover caps for glass retainer profile (1 horizontal profile) 1 940.40.064 Fixing set for 2 glass retainer profiles (1 horizontal profile) 1 940.40.098 Allen key 1 940.40.097 Running Tracks Running track, drilled HAWA- Junior 80 Material Finish Length mm Aluminium Clear anodised 6000 940.80.600.1 Accessories Material Finish Length mm 2 cover profiles for 1 horizontal Aluminium Mill 1200 940.41.402 profile, including clip-on rubber Clear anodised 1200 940.41.405 Brushed 1200 940.41.408 stainless steel effect For glass retainer profile For 8 mm glass 940.41.050 For 10 mm glass 940.41.052 Fitting instruction for planning and installation 732.29.092 6.72
Slido Sliding Door Fittings - For glass doors HAWA Junior 80/GP for Door weights up to 80 kg Glass door preparation Area of application : For 1- and 2-leaf sliding doors Features : Low installation height Height adjustable door leaves Patch fixing with glass patch retainer Suspension with suspension bolt Low wear and tear Quiet running action LGA tested to 100,000 cycles (EN1527). Max. door weight : 80 kg per door leaf Glass thickness : 8, 10 and 12 mm Adjustable vertically : 3 mm Materia l: Running gear with nylon rollers Floor guide free of play: Aluminium with plastic insert 6.73
Slido Sliding Door Fittings - For glass doors HAWA Junior 80/GP Fitting Set For 1-Leaf Sliding Door 940.81.006 Note : Running and guide tracks are not included, please order separately. For 2-leaf sliding doors, please order 2 sets of 1-leaf sliding door fittings The floor guide and cover caps need to be ordered separately. Set Components For 1-leaf sliding door Running gear 2-wheel, M10 2 Pieces 940.80.012 Suspension bolt M10 and mounting screws 2 Pieces 940.80.023 Glass patch retainer 2 Pieces 940.40.038 Track buffer with retainer 2 Pieces 940.80.041 One-way drilling jig 1 Piece 940.40.089 Rubber wall buffer 1 Piece 940.40.051 Height adjusting pin 1 Piece 940.40.090 Note : Catalogue numbers refer to 1 piece. When ordering individual components, please specify the required quantity. Running Tracks Running track, drilled HAWA- Junior 80 Material Finish Length mm Aluminium Clear anodised 6000 940.80.600.1 6.74
Slido Sliding Door Fittings - For glass doors Cover Caps for HAWA Junior 40, 80, 120 and 160/GP Cover cap square (2 pieces required for each glass patch retainer) Material Finish Packing Plastic Chrome satin (4 ) 940.41.028 Stainless steel colour 1 (4 ) 940.41.027 Raw 1 940.41.024 Cover cap round (2 pieces required for each glass patch retainer) Plastic Chrome satin 1 (4 ) 940.40.027 Brass polished 1 (4 ) 940.40.028 Stainless steel colour 1 (4 ) 940.40.023 Chrome polished 1 (4 ) 940.41.029 Raw 1 940.41.023 Version 1 Floor Guide, rattle proof, for 8,10,12 (12.7) mm glass Material Finish Length mm Steel Chrome matt 940.40.032 Version 2 Bottom guide channel, 20 x 20 x 3 mm, predrilled Aluminum Silver anodized 6000 407.80.901 Self-adhesive sliders for 8 mm glass, 20 x 20 x 3 mm 940.40.033 Self-adhesive sliders 10 mm glass, 20 x 20 x 3 mm 940.40.034 Version 3 Patch suspension with glass holder insert (VSG/ESG) 940.40.038 Guide slider, rattle proof, with mounting screws, suitable for patch suspension 940.40.035 Bottom guide channel, 24 x 24 mm, undrilled Aluminium Silver anodized 6000 940.81.600 Order-made 940.81.999 Stop bumper, 24 x 24 mm Aluminium Silver anodized 940.80.051 Version 4 Patch suspension with glass holder insert (VSG/ESG) 940.40.038 Spring bottom guide for point fixing, incl. mounting screws 940.40.039 Single bottom guide track Set of fixing parts for single bottom guide (2 pcs per meter) Aluminium Silver anodized 2500 940.41.725 3500 6000 940.41.760 Plastic Black 404.97.990 6.75
Slido Sliding Door Fittings - For glass doors HAWA Side-Fix Angle Profile For HAWA Junior 40, 80 and 120 Running Tracks ~50 ~220 Features : Max. door weight : Elegant design with concealed fixing Continuous profile for simple leveling Easy and quick to install No drilling of running track or angle profile required No additional support structure required For use with Junior 40, 80 and 120 glass sliding fittings 40 kg, 80 kg or 120 kg per door leaf 4-5 Easy and quick installation of angle profile and running track HAWA Junior 40 HAWA Junior 80 HAWA Junior 120 6.76
Sliding & Folding Door Fittings For Wall Mounted Sliding Door Applications With HAWA Junior 40 Running Tracks Angle profile, pre-drilled Track fixing parts (10 pieces sufficient 2000 mm track length) Material Finish Length mm Aluminium Clear anodised 2000 940.40.201 4000 940.40.401 6000 940.40.601 Cut to size 940.40.991 Set of 10 pieces 940.40.099 Cover caps, for angle p rofile and running track Plastic Grey 1 pair 940.40.061 Anthracite 1 pair 940.40.065 With HAWA Junior 80 Running Tracks Angle profile, pre-drilled Track fixing parts (10 pieces sufficient 2500 mm track length) Angle profile, pre-drilled Cover caps, for angle p rofile and running track Material Finish Length mm Aluminum Clear anodised 2500 940.80.251 4000 940.80.401 6000 940.80.601 Cut to size 940.80.991 Set of 10 pieces 940.40.099 Plastic Anthracite 1 pair 940.80.065 With HAWA Junior 120 Running Tracks Angle profile, pre-drilled Material Finish Length mm Aluminum Clear anodised 4000 941.20.403 6000 941.20.603 Cut to size 941.20.992 Track fixing parts (20 pieces sufficient for 6000 mm track length) Set of 20 pieces 941.20.099 Cover caps, for angle p rofile and running track Plastic Anthracite 1 pair 941.20.065 Note : Running tracks and fitting sets have to be ordered separately 6.77
Flush Pull Handles For glass doors Flush pull handle, closed type Flush pull handle Area of application : Drill hole Ø : Installation : For glass thickness 8 or 10 mm 55 mm For clamp fixing Area of application : Material : Drill hole Ø : Installation : For glass thickness 8-10 mm Aluminium 11 mm For screw fixing to one side, screws visible For glass thickness mm Stainless steel matt Brass chrome plated matt 8 981.10.040 981.10.047 10 981.10.041 981.10.048 For glass thickness mm Silver coloured Stainless steel coloured 904.00.451 904.00.452 Flush pull handle, open type Flush pull handle Area of application : Drill hole Ø : Installation : For glass thickness 8 or 10 mm 55 mm For clamp fixing Opening size For glass thickness mm Stainless steel Brass chrome matt plated matt 8 981.10.050 981.10.057 10 981.10.051 981.10.058 Area of application : Material : Installation : For glass thickness mm For glass thickness 8-10 mm Brass For screw fixing to one side, screws visible Silver coloured Stainless steel coloured 901.01.224 901.01.226 6.78
Wooden folding sliding Doors Vorfront FT 2 VF 35 For door weights up to 17.5 kg (35 kg per pair of doors) Door width calculation LK = internal cabinet width SL = track length FB = door width A = door overlay F = gap width FB = LK + (2 x A) - (number of gaps x F mm) number of door leaves max. door thickness Door width : max. 450 mm Door thickness : 19-27 mm Height adjustment : 2 mm on running gear Running gear : Top running, 2 rollers, Running gear guided by : Friction bearing Version : Free moving Installation : Running gear for clip fixing into running track without tools Fitted door leaves can be combined to door leaf pairs using detachable panel to panel hinges with removable pin Installation Running and guide track dimensions Running track Guide track A = Only when using door deflector 6.79
Wooden folding sliding Doors Set For 1 pair of doors, with installation instructions Packing : 1 set Order reference The fixing material, running tracks and guide tracks are not included in the set. Please order separately. 410.26.049 Set components(individual parts) Running gear, left, with 2 stoppers, top running, 2 rollers, friction bearing mounted Set consists of: Material Finish/colour For 1 pair of doors 1 piece Steel Galvanized 410.26.107 Running gear, right, with 2 stoppers, top running, 2 rollers, friction bearing mounted 1 piece Steel Galvanized 410.26.106 Guide, left, with stopper, bottom running, 4 rollers, friction bearing mounted 1 piece Steel Galvanized 410.26.205 Guide, right, with stopper, bottom running, 4 rollers, friction bearing mounted 1 piece Steel Galvanized 410.26.204 Panel to panel hinge, can be detached, with removable steel pin 3 pieces Zinc alloy Nickel plated 410.25.402 Door deflector, installation in pairs 2 pieces Plastic Glass clear 410.25.403 End stop follower for running and guide track, suitable for right hand and leftt hand use, including screw and connecting sleeve 4 pieces Rubber Black 410.26.302 Packing : 1 or 20 pieces 6.80
Wooden folding sliding Doors Tracks and individual components Length mm Material Finish/colour Running track, not drilled 2500 Aluminium Bright 410.26.612 5000 410.26.605 Guide track, not drilled 2500 Aluminium Bright 410.26.622 5000 410.26.805 Running gear, left, without stopper, top running, 2 rollers, friction bearing mounted Steel Galvanized 410.26.105 Running gear, right, without stopper, top running, 2 rollers, friction bearing mounted Steel Galvanized 410.26.104 Guide, left, with stopper, bottom running, 4 rollers, friction bearing mounted Steel Galvanized 410.26.201 Guide, right, with stopper, bottom running, 4 rollers, friction bearing mounted Steel Galvanized 410.26.200 Stoppe, for running gear and guide, suitable for lefe hand and right hand use Plastic Black 410.26.301 Connecting sleeve, for connecting do or leaf pairs Steel 410.26.400 Packing : 1 or 20 pieces FT 2 VF 35 6.81
Wooden folding sliding Doors Vorfront FT 2A VF 25 For door weights up to 12.5 kg, (25 kg per pair of doors), attached at the side Version with panel to panel hinge offset by 6 mm Example with 110 hinge, panel to panel hinge off centre = 6 mm Version with inset guide track max. door thickness Door width : max. 500 mm Door thickness : 19-27 mm Height adjustment : 2 mm on running gear Running gear : Top running, 1 roller, Running gear guided by : Friction bearing Version : Attached at the side Installation : Running gear for clip fixing into running track without tools Fitted door leaves can be combined to door leaf pairs using detachable panel to panel hinges with removable pin Guide, bottom running, 4 plastic rollers, with 1 concealed hinge Installation Running and guide track dimensions Running track Guide track A = Only when using door deflector 6.82
Wooden folding sliding Doors Set For 2 pairs of doors (left/right) with installation instructions Packing : 1 set Order reference The fixing material, running tracks and guide tracks are not included in the set. Please order separately. 410.26.050 Set components(individual parts) Running gear, left, with stoppers, top running, 1 rollers, friction bearing mounted Set consists of: Material Finish/colour For 2 pairs of doors 1 piece Steel Galvanized 410.26.103 Running gear, right, with stoppers, top running, 2 rollers, friction bearing mounted 1 piece Steel Galvanized 410.26.102 Guide, left, with stopper, bottom running, 4 rollers, friction bearing mounted 1 piece Steel Galvanized 410.26.203 Guide, right, with stopper, bottom running, 4 rollers, friction bearing mounted 1 piece Steel Galvanized 410.26.202 Panel to panel hinge, can be detached, with removable steel pin 6 1 pieces Zinc alloy Nickel plated 410.25.402 Door deflector, installation in pairs 2 1 pieces Plastic Glass clear 410.25.403 Packing : 1 or 20 pieces FT 2A VF 25 6.83
Wooden folding sliding Doors Tracks and individual components Running track, not drilled Length mm Material Finish/colour 2500 Aluminium Bright 410.26.612 5000 410.26.605 Guide track, not drilled 2500 Aluminium Bright 410.26.622 5000 410.26.805 Running gear, left, without stopper, top running, 1 rollers, friction bearing mounted Steel Galvanized 410.26.101 Running gear, right, without stopper, top running, 1 rollers, friction bearing mounted Steel Galvanized 410.26.100 Guide, left, with stopper, bottom running, 4 rollers, friction bearing mounted Steel Galvanized 410.26.201 Guide, right, with stopper, bottom running, 4 rollers, friction bearing mounted Steel Galvanized 410.26.200 Stoppe, for running gear and guide, suitable for lefe hand and right hand use Plastic Black 410.26.301 Packing : 1 or 20 pieces 6.84
Wooden folding sliding Doors FDO-3 Bifold Fittings Max. weights for 2 doors up to 30 kg Adjustment Door thickness : Min.16 mm Height adjustment : 3 mm at running gear using screw Material : Upper track : Aluminum, Upper running roller : steel, plastic Center hinge, concealed hinge : Steel, nickel plated Center fixing fittings : Plastic Smooth & easy sliding ( ), 2 mm 2 mm 4 mm 2 mm 2 mm 4 mm 2 mm 2 mm 4 mm 409.55.799 + 409.55.400 409.55.410 ( 1 set) 409.55.420,,. ( 3 mm).. 6.85
Folding Door Fittings for Wood Doors HAWA Bifold 40 for Door weights up to 40 kg 6.86
Folding Door Fittings for Wood Doors HAWA Bifold 40 Fitting Set For 2 -Leaf Folding Doors Without Running Track, Without Guide Channels 407.58.003 Set Components Running gear, with nylon wheels For 2-leaf 2 Pieces Suspension plate, M10 bolt and mounting screws 2 Pieces Upper pivot, M10 1 Piece Lower pivot, M8 1 Piece Butt hinge* 3 Pieces Height adjusting pin 1 Piece Stop bracket, with rubber buffer 1 Piece * Butt hinges included in fitting set are for a maximum door height of 2200 mm Please order additional hinges based on the chart below: Door height Hinges required Up to 2700 mm = 4 Up to 3200 mm = 5 Running Tracks and accessories Material Finish Length mm Running track, pre-drilled Aluminium Clear anodised 6000 940.80.600.1 Bottom guide channel, pre-drilled, 20 x 20 x 3 mm Aluminium Clear anodised 6000 407.80.901 Butt hinge Steel Galvanised 407.78.989 Fitting instructions for planning and installation 732.24.014 6.87
Application matrix The following table shows an overview of the weight per square metre [kg/m 2 ] in accordance with the material that is used: Material Weight per cubic metre kg/m 3 3.00 3.20 4.00 5.00 6.00 Chipboard 650 -- 750 4.50 6.00 7.50 9.75 12.00 14.25 16.50 18.75 21.00 28.50 Chipboard, coated 500 -- 800 4.80 6.40 8.00 10.40 12.80 15.20 17.60 20.00 22.40 30.40 Hard fibreboard, untreated 230 -- 350 1.12 1.40 1.75 2.10 MDF board, untreated 900 9.00 11.70 14.40 17.10 19.80 22.50 27.00 Blockboard, untreated 520 -- 550 7.15 8.80 10.50 12.10 13.75 16.50 Veneer board 500 -- 800 3.20 4.00 4.80 6.40 8.00 Glass 2500 7.50 10.00 12.50 12.50 20.00 25.00 Solid wood, spruce approx. 450 7.20 8.55 Solid wood, beech approx. 700 11.20 13.30 Solid wood, oak approx. 680 10.88 12.92 Solid wood, teak approx. 620 9.92 11.80 Solid wood, pine approx. 550 8.80 10.50 8.00 10.00 13.00 16.00 19.00 22.00 25.00 28.00 30.00 38.00 6.88