SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 POCKET SLIDING INTERIOR DOOR SYSTEMS HAWA-JUNIOR 80 XINNIX POCKET SLIDING DOOR SYSTEM High quality straight sliding door gear for residential or commercial projects complete with frame stud work to create 100 mm finished wall pocket and using the HAWA-Junior 80 sliding system. > Xinnix Hawa-Junior 80 > Range: For max. door weight: 80 kg For max. door height: 2300 mm For max. door width: 1000 mm For max. door thickness: 40 mm > Using standard UK door sizes a sliding door cavity wall can easily be installed saving time and money on projects, suitable for 75 mm stud to create 100 mm wall > Frames can be cut to size by 500 mm width and 1000 mm height > with Xinnix finishing set for pelmet and closing jamb or Xinnix B set for low headroom applications > For larger openings or double doors please contact us 2070 (Bpx2+10mm) 12.5 75 12.5 1040 2116 (Hp+101) 2070 (Hpx2+10mm) 1040 2465 (Hp+81) 2015 1030 1000 1030 1000 2000 100 2384 (H plafond -16mm) 2400 100 15 15 1030 40-50 28 1030 44-54 1000 30 44 40 28 1000 12.5 30 15 75 15 12.5 90 2116 12.5 75-100 12.5 25 40 25 20 10 12.5 75-100 12.5 40-50 20 25 40 29 2015 10 7 34 25 18 6 2.5 2384 10 min. 72 With soft close mechanism 98 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
HAWA-Junior 80 Xinnix pocket door system 40 B 34 A 113 10 23 D 113 10 3 C > Set for 1 sliding pocket door includes A Top track, 1 length B Track holder, C Middle supporting profiles, 2 pcs D Front supporting profiles, 2 pcs E Hawa-Junior 80 trolley hanger, 2 pcs F Hawa-Junior 80 track stopper, G Hawa-Junior 80 buffer, H Alternative bottom guide, I Soft closing mechanism, J Fixing plates, 4 pcs Fitting instructions I J F E H G For door height x width 2100 x 1000 mm 984.60.040 2300 x 1000 mm 984.60.041 Xinnix finishing set 46 28 10 9 M 22 N 12.5 12.5 70 90 K L Assembled Xinnix B low headroom finishing set 46 N 10 28 9 22 70 F 26 34 L O 2 208 26 > For standard headroom applications > Set includes: K Plaster board pelmet, L Jamb, M Metal jamb frame, N Seals, 2 pcs (Order 1 per door set) For door height 2100-2300 mm 984.60.044 > For low headroom applications, alternative to Xinnix set above > Set includes: L Jamb, N Seals, 2 pcs F Hawa-Junior 80 track stopper, O Low headroom carriage, for use with Hawa-Junior 80 trolley For door height 2100 mm 984.60.043 2300 mm 984.60.045 SLIDING DOOR FITTINGS FOR INTERIOR DOORS AND PARTITIONS / 99
SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 SLIDO 80-B POCKET SLIDING DOOR SYSTEM An internal straight sliding pocket door system complete with solid pocket, which means there is no need to cut any parts, the full assembly slots into a studwork wall and is simply finished with plasterboard before mounting the doors. > Slido 80-B > Suitable for residential, hotels, schools, offices and other commercial projects > Range: Max. door weight 160 kg (80 kg with softclose) Max. door height 2040 mm Max. door width 926 mm Max. door thickness 44 mm > For finished wall thickness of 100 mm with single 12.5 mm plasterboard as standard or 125 mm with double plating > Using standard UK door sizes a sliding door and cavity wall can be easily installed saving time and money on project > Solid pocket prevents damage to plasterboard wall 90 Min.46 - Max. 55 E = Height+90 Height+10 Height 7 18 5 100 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
Slido 80-B Pocket system C A > Set for 1 sliding pocket door includes: A Track, 1 length B Solid pocket for plaster board, C Trolley hangers with 20 mm width bracket, 2 pcs D Track stopper, 25 x 65 x 21 mm, E Door buffer, F Bottom guide, 20 x 44 x 28 mm, D F E B Soft close mechanism for Slido 80-B Pocket system > ing kits available, shown on page 103 For door height x width For 1 door 1981 x 686 mm 984.42.000 1981 x 762 mm 984.42.001 1981 x 838 mm 984.42.002 1981 x 914 mm 984.42.003 2040 x 926 mm 984.42.004 > For max. door weight 80 kg > Only one can be used per door Soft close mechanism 984.42.090 SLIDING DOOR FITTINGS FOR INTERIOR DOORS AND PARTITIONS / 101
SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 SLIDO CLASSIC 160-B POCKET DOOR SYSTEM High quality internal straight sliding door gear for residential and commercial applications. The unique design allows doors up to 55 mm thick to be installed with a finished wall of 100 mm, can be cut to suit standard UK door sizes or large custom doors. > Slido Classic 160-B > Range: Max. door weight: 160 kg (80 kg with Softclose) Max. door height: 2500 mm Max. door width 1026 mm For door thicknesses 30-55 mm > Allows doors up to 55 mm thick to be installed with a finished wall of 100 mm > The kit can easily be cut to suit standard UK door sizes or large custom doors with the universal kit > Supplied as a kit to create the pocket, once cut this can be asembled in 10-20 minutes by a skilled installer > jambs are normally made by the door installer, but kits are available on request Soft close mechanism for Slido 160-B Pocket system H1 70 100 L1= L nominal + 40 mmm. L2 = L nominal x 2 +120 mm. H1 = H nominal + 50mm. L1 L2 H2 = H nominal + 90 mm. > For max. door weight 80 kg > Only one can be used per door Soft close mechanism 984.42.090 102 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
Slido Classic 160-B sliding door fitting set B D C A > Slido Classic 160-B sliding door fitting set consists of: A Trolley hanger, for sliding door, bracket length 102 mm, aluminium/plastic B Track stopper, 23 x 25 x 48 mm, aluminium C Door buffer, Ø 19 mm, screw fixing, rubber D Floor guide, 34 x 30 x 81 mm, floor mounted or side mounted, plastic E Top rail and track, marked for cut to UK door size, aluminium F Top profile, marked for cut to UK door size, aluminium G Studwork mounting, aluminium H Rear pillar, aluminium I Front profile, aluminium J Floor installation profile, aluminium K Centre installation profile, aluminium E I Interior and exterior pocket finishing kits - Tanganika Q L J O F K Q M Plasterboard supplied by others > For use with Slido 80-B pocket systems 984.42.001/002/003/004 shown on pages 100-101 and Häfele Slido Classic 160-B systems 984.42.005/006/007 shown on this page G N P H Fitting set A Trolley hanger B Track stopper C Door buffer D Floor guide E Top rail and track F Top profile G Studwork mounting H Rear pillar I Front profile J Floor installation profile For 1 door 2 pcs 2 pcs K Centre installation profile Suits 1981 mm height doors (Width 686/762/838/926 mm) 984.42.005 Suits regular 2040 mm height doors (Width 626/726/826 mm) 984.42.006 Suits large 2040 mm height doors (Width 926/1026 mm) 984.42.007 Universal kit suits doors up to 2500 x 1000 mm cut to 2100 and 600 mm max. 984.42.008 > Interior finishing set consists of: 2x L Edge jambs - 2100 mm for fixing to pocket 1x M Pelmet - 2100 mm cut for use either side 1x N Closing jamb - 2100 mm 1x O Brush seal - 4200 mm for fitting into L 1x P Rubber gaskets - 4200 mm for item N > Exterior finishing set consists of: 5x Q Architrave - 2100 mm to fit around door on both sides > Can be painted or stained as required Interior finishing kit 984.42.009 Exterior finishing kit 984.42.010 SLIDING DOOR FITTINGS FOR INTERIOR DOORS AND PARTITIONS / 103
SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 POCKET HIDEAWAY SLIDING DOOR SYSTEM An internal straight sliding pocket door system primarily for domestic housing applications. A very flexible system which can be cut down making it ideal for dining rooms, ensuite bathrooms, cloakrooms and doors into kitchens. > Pocket Hideaway > Application: With Building Regulations Part M approval and due to it s light weight construction, this system is ideal for retirement homes and assisted living premises, making the building more independently accessible to all Providing an efficient, economical way of allowing increased space and easier access, the pocket door concept enables sliding doors to become a significant design feature of a home > Range: Max. door weight 56 kg Max. door height 2032 mm Max. door width 1067 mm Door thickness 28-50* mm *For 44-50 mm door thickness use cavity widening set shown on page 105 > Pocket Hideaway complete set comprises header assembly with pre-fitted track and fittings > For bi-parting doors use 2 sets and 1 Hideaway jointing fitting set shown on page 105 > Sets are supplied complete with fixing materials and installation instructions 10 59 12.5 30 Header stud (supplied by others) 18 51 18 35 mm Max 50 90 * 19 50 Steel wrapped studs 12.5 (plaster board) Door panel Door guides *N.B. Add 5mm if frame adapter kit is used (i.e. for doors 35mm to 44mm). ALLOWS FOR CARPETS+UNDERLAY A B 104 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
Pocket Hideaway door system > Pocket hideaway door system consists of: C F A Header assembly, with pre-fitted track B Steel wrapped timber studs, provides stability set C Hangers, with 3 wheels, steel mounting plate, nylon rollers D Floor plates, steel E Bottom guides, nylon 25.5 76 F Door stop, rubber G Frame adaptor fitting set, 35-44 mm door thickness D G 3 46 Max door width 760 mm 915 mm 57 45 A Header assembly B Steel wrapped studs 1 set 1 set C Hangers 2 pcs 2 pcs E G D Floor plates 2 pcs 2 pcs E Bottom guides 2 pcs 2 pcs 63 F Door stop G Frame adaptor fitting set 1 set 1 set 940.58.005 940.58.006 Pocket door flip up handle 15 11 > For use with cavity sliding doors > Brass 55 59 Satin nickel 911.26.078 Pocket Hideaway jointing fitting set Pocket Hideaway cavity widening set 20 69 755 60 1092 x 2 pcs base plate 6 19 29 19 x 2 pcs each size spacer 6 Satin brass 911.26.079 > For use with 2 pocket Hideaway door sets Jointing fitting set 940.58.020 > For use when door thickness is between 44-50 mm Cavity widening set 940.58.030 PAGE AMENDED 26.09.14/1 SLIDING DOOR FITTINGS FOR INTERIOR DOORS AND PARTITIONS / 105
SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 SLIDING POCKET FIRE DOOR SYSTEM Sliding fire door cassette system offers a flexible pocket door system for a single fire door. Three types of soft close with damper are available to ensure soft stop control. > Range: Max. door weight: 80 kg Door thickness: Timber fire door (FD30) Door width: 626-1400 mm Max. door height: 2700 mm Wall thickness: 150 mm finished > The sets come complete with track, runners, brackets, stops, intumescent fire seals, pre-cut and formed plasterboard sections and cassette > Available to special order - please contact us for further information > Suitable for a single fire door (FD30) from 626 mm to 1400 mm wide and up to 2700 mm > Door leaves for use in FD pocket door kits are subject to certain size and door leaf construction constraints to comply with fire Certification > Generally there is an inverse relationship between the size of door panel (leaf) and the scope e.g. FD20, FD30 etc which can be achieved under the Certification > The information shown on page 107 is only relevant for doors for use within FD kits. > This is a special order system; for project specifications and quotations please contact our Specifying Team > Tel: 0800 171 2908 or e-mail specify@hafele.co.uk 106 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
Height (mm) Height (mm) > For single door > Max. door thickness 44 mm > For doors over 2400 mm high the use of a reinforcing kit is recommended 3000 Single door FD/E rated kits (sizes stated are per door leaf) 2700 2600 D1 B1 C1 A1 2500 B2 D2 2000 500 1000 1500 2000 Width (mm) > For double doors > Note: The self close cannot be used on the double fire door kits. 3000 Double door FD/E rated kits (sizes stated are per door leaf) 2700 2600 2500 A1, B1 C1, D1 > Self close with damper: A self closing system with a soft stop control at the end of its travel Available only in 80 kg size for fire doors Note: The self close cannot be used on the double fire door kits > Soft close damper: A soft stop system that catches the door when it has been manually closed and draws it finally into the jamb Available only in 80 kg size for fire doors > Self close with damper and e-mag hold open: A self closing system with a soft stop control at the end of its travel The door is held open with an electromagnet, such as in corridors, and then closes upon the activation of a fire alarm or timer or security device Must be wired in by an electrician Available only in 80 kg size for fire doors 2000 500 Width (mm) C2, D2 1000 A2, B2 1500 2000 SLIDING DOOR FITTINGS FOR INTERIOR DOORS AND PARTITIONS / 107
SLIDING DOOR FITTINGS DIRECTORY / APRIL 2014 IRONMONGERY AND ACCESSORIES FOR INTERIOR POCKET DOORS StarTec Flush pull handle, stainless steel > Ø 50 mm > Installation is by push fit > Stainless steel Satin stainless steel 902.01.250 Flush pull handle, stainless steel > FSB 4250 and FSB 4251 flush pull handles are also suitable for interior pocket doors, shown on page 173 Flush pull handle, nylon > 100 x 52 mm > Concealed fixing > Nylon > Note: Other colours available to order, subject to quantity > Ø 90 mm > Grade 316 stainless steel 3.5 White 908.04.419 Satin stainless steel 902.00.500 Polished stainless steel 902.00.501 Flush pull handle, stainless steel Flush pull handle > 102 x 45 mm > Brass > Order qty: 1pc > Ø 65 mm > Secret fixing > Stainless steel Satin stainless steel 902.00.520 Polished stainless steel 902.00.521 FSB 4252 flush pull handle, stainless steel > Ø 75 mm > With sprung cover > Press fit into a Ø 70 mm hole > Stainless steel Satin stainless steel 902.00.366 StarTec Flush pull handle, stainless steel > 70 x 70 mm > Stainless steel Satin stainless steel 902.01.260 Cat.No. Polished brass 901.01.421 Polished chrome 901.01.422 Satin chrome 901.01.424 Flush pull handle, stainless steel > 100 x 50 mm > Concealed fixing > Stainless steel Cat.No. Satin stainless steel 902.01.270 Polished stainless steel 902.01.271 Mortice gravity drop pull handle > 130 x 25 x 46 mm > Operation: Push to release > Light duty > Brass Satin nickel 911.26.131 Polished brass 911.26.130 108 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
This is a selection of fittings and accessories to complement your sliding door gear project, for full specification details on these products, please visit www.hafele.co.uk. SL retractable clear threshold seal Fischer GKM plasterboard dowel Left hand shown > Overall length: 960 mm > Minimum cut length: 835 mm > Suitable for timber doors > Lift height 20 mm > Fixed on side with stainless steel bracket and screws, end cap included > Includes adjustable floor guide > Compact space-saving solution with intergrated floor guiding groove > Automatic compensation for inclined floor > No push back on closing > Acoustic rating of 48dB at 7 mm floor to door clearance > Can be shortened to next stock length > High grade silicone lip, protected by deeper rebate > Simple lift height adjustment > 5 year warranty > Aluminium, clear anodised, stainless steel stop plate Handed DIN Left hand 950.10.023 DIN Right hand 950.10.033 Fix All Fills & Bonds heavy duty foam adhesive > One can replaces 25 kg bags of adhesive > Ready to plaster in 1 hour > Fast curing > High filling capacity > Paintable > Can be applied on wet surfaces > B2 fire rated (DIN4102) > Thermal and acoustic insulator > Sufficient for approx. 5 plasterboards > Time saving and efficiency improving > 750 ml can > Champagne colour > Order gun separately Item Gun version can 003.50.069 Gun 003.52.920 Plasterboard GK Fischer dowel Metal cavity fixing HM > To suit screw size Ø 4-5 mm > Grey metal dowel, adapted for wood, self-tapping and chipboard screws > Pan head plasterboard screw and pozi screwdriver bit included > Suitable for plasterboard, rear insulated plasterboard, fibreboard > Not suitable for tiled plasterboard > Order qty: Multiples of 100 pcs Length 31 mm 051.69.000 > Only small amount of space necessary behind the board, as dowel supplied with a tool which allows the dowel to be inserted form-closed in the plasterboard, not behind the board > Grey nylon > Insertion tool for boring jig installation included > Suitable for plasterboard, rear insulated plasterboard > For fastening lamps, skirting, electric switches, picture frames, cable trunking, curtain rails, wooden borders and series installations > Not suitable for fibre plasterboard or tiled plasterboard > Order qty: Multiples of 100 pcs To suit screw size Ø 4-5 mm 051.63.000 > Suitable for plasterboard, fibreboard, chipboard, fibre cement board, hard fibreboard, lightweight wood-shaving board, hollow brick, hollow stone floors > After installation, screw supplied can be replaced with hook, eyelet, threaded pin with metric thread, as fixing always remains in its expanded position > Fixing is expanded by tightening the screw > Zinc-plated steel fixing sleeve and M6 screw > Order qty: Multiples of 50 pcs Length Board thickness 37 mm 6-15 mm 051.75.007 67 mm 20-34 mm 051.75.009 SLIDING DOOR FITTINGS FOR INTERIOR DOORS AND PARTITIONS / 109