Page 1 Attachment Assemble to order Metric.pdf Date 0/0/1 Metric Attachments A1 WA-1 K1 WK-1 R1 A1, K1 and R1 Connector Links and Inner Links p b 2 g F B m D L I F H s 2.2.. 7.1.2,000.. 1.. 0. 1.2 4 4 4 (07)* 47.1 (DIN). 4. 4. 4.. 7.. 7.2. 10. 10.2. 11. 11.7,0,000,0 R1 11.7. 4.. 1.. 2. 2 1.7. 1.2 14.2. 1..7 10.1 1. 2 (DIN) 1.7. 1.2 14.2 14.2. 1..1 10.1 1. 10. 1 11 10.. 11.. 4.. 4. 4. 10. 10.2.7 1.1 1.1 1 1 1. 1 1.2 7 7 7 7.. 0. 1.2 1. 0. 1. 1. (DIN) 1. 1. 1.4 1.4 1. 1. 2. 2. 1.4 1.4 1.1 1.1 2 2 IL (DIN) 0.1 0 1.7 11. 11. 1. 1 1 1.. 4. 4. 1.1 1.1 2. 7.4 7.4 1. 1. 4.1 1. 1. 10..0. 1. 1. 102 102 IL 10 2 1 1 1 44.4 0. 0. 1. 1.. 0. 0. 1.2 7. 1. 4. 4. 27.4..4 7.2 1 0,000,000 2.1 2.2 1 1 4 0 0.4. 11 14 14 1.7 44 1. 4.1 4 2. 4 41. 2.7 4 2 7 7. 4. 1. 1. 10 2 11 2 1. 4.4 1.7 1. *Obsolete Part numbers. Current Inventory will not be replenished. Note: The above attachments are produced as connector links for self assembly. with riveted attachments can be produced assembled-to-order in our South Carolina facility. DIN = German Standard Series Attachment 1 American Metric Corporation Group: 00 1-00 - 07071
EP1 EP2 EPX Metric Attachments D-1 D- EP1, EP2 And EPX Connector Links and Inner Links p b 2 d 2 g F B Part D Z L Z 7.1 7.1 7.1,000,000,000 CL-EP_2.1x CL-EP_2.1x CL-EP_4x10 2.1 2.1 4 10 2 2 2 2.2.2.2.2.............2.2.2.2 2 CL-EP_-.x11 2 CL-EP_-x1 2 CL-EP_-.x4 2 CL-EP_-.x2.27.27.27 11.1 1 4..7 4 4........,0,0 4 CL-EP_-.x 4 CL-EP_-x1. 1 4 4. 7. 4.0 10.,000 4 CL-EP_-x1 1 47.1 4. 7.2..,0 47.1 CL-EP_-x1 1 4.4 4.4 4.4 4.4 4.4 11. 11. 11. 11. 11. CL-EP_-4.4x1 CL-EPX_-4.4x CL-EP_-4.44x44 CL-EP_-4.4x CL-EP_-x1 4.4 4.4 4.4 4.4 1.1. 44. 1 2 2 2 2 1.7 1.7 1.7 1.7.... 1.2 1.2 1.2 1.2.0.0.0.0 2 CL-EP_-x17 2 CL-EP-x4 2 CL-EPX-x 2 CL-EPX-x.0.0.0. 17. 4. 11. 1. 1. 1. CL-EP_-x CL-EP_-7x CL-EP_-x14 7. 14. 2 2 2.2.2.2 2 CL-EP_-x4 2 CL-EP_-x1 2 CL-EP_-10x0.27.27 10. 1.1 0 4.4 4.4 11. 11. CL-EP_-4.4x CL-EP_-x1 4.4. 1 0.1 0.2 0.1 CL-EP_ 10 0 102 1. 10.1 102 CL-EP_x0 0 10 10.. 1.2 1.2.0.0 10 CL-EP_x 10 CL-EP_x.0. 11. 2 7. 14..4 1 2 CL-EP_1x 1 1. 1. CL-EP_-x1 CL-EP_-7x 7 14. 1 44.4 0. 4. 27.4 1. 7 0,000 1 CL-EP_x40 40 1 0. 0. 4.. 17.1.2,000 1 CL-EP_x40 40 1 1 0. 0..2.2 1 CL-EP_x1 1 CL-EP_10x0.27 10 1 0.. 1. 1. 10.1 10.1 2. 2. Note: The above attachments are produced as connector links for self assembly. with riveted attachments can be produced assembled-to-order in our South Carolina facility. EP1 = One extended pin EP2 = Two extended pins, one side EPX = One Extra Long Extended Pin CL-EP_10x CL-EP_x0 10.1 2. 0 1-00 - 07071 Group: 00 American Metric Corporation 17 Page 2 Attachment Assemble to order Metric.pdf Date 0/0/1
Page Attachment Assemble to order Metric.pdf Date 0/0/1 Metric Attachments SA1 SK1 WSA-1 WSK-1 SA1 & SK1 Connector Links and Inner Links p b 2 g F B m D L I F H F s 7.1,000 7. 1 0. 2 2 (77) 2 (07).2.2.2.......2.2.2....7. 1.7 1.4 1. 1 1.2 1.1 4 4 47.1. 4. 4.. 7. 7.2. 10..,0,0 10. 1 10.... 11. 11..7 17. 17.4 1. 0. 1.2 0. IL (DIN) (77) 11. 11. 11.7 11.7.. 11. 4. 4.2 4. 4. 14.1.1 1 1.4 1.2 1.. 1. 1. 1. 1. 2 2 IL 2 (DIN) 2 (77) 1.7 1.7 1.7 1.7.... 1.2 1.2 1.2 1.2 14.2 14.2 14.1 14.1 14.2 1.2.2.. 1. 1. 1. 17.2 24.7 24. 2.1 2.7 1. 1. 1. 1.7 (DIN) (77) 1. 1. 1. 1.4 1.4 1. 1.. 17. 1.7 2.2 2.4 1.1 1.1 1. 2 2 (77) 2 (DIN) 1. 2 1.. 2 2. 2 4. 41. 4..0.0 11. 1 4.. 1. 0.1 0 2. 4.1 102 102 IL 102 (77) 102 (DIN) 10 2 1 1 1 44.4 0. 0. 1. 1. 1. 1.. 0. 0. 1.2 7. 1. 4. 4. 27.4..4 7.2 1 0,000,000 2.2 2.2 2.2 1 1 4 0 0.4. 11 14 14 0. 0. 0. 17 41 17. 2.. 4.7 2.7 0 2 7. 77.. 4.4.7. 1.7 1. Note: The above attachments are produced as connector links for self assembly. with riveted attachments can be produced assembled-to-order in our South Carolina facility. DIN = German Standard Series Attachment 1 American Metric Corporation Group: 00 1-00 - 07071
Metric Attachments SA2 WSA-2 SK2 WSK-2 SA2, and SK2 Connector Links and Inner Links p b 2 g F B m D L G I F H F s 2.2...2 1.2..2.2. 1.2 (DIN) 11. 11.7 2. 2. 4. 4. 14.1 1.4 1.4 1. 1. 2 2 (DIN) 1.7 1.7.. 1.2 1.2.1.1.. 1.7 1.7 1. 1. 24.7 2.1 1. 1. (DIN) 1. 1. 2. 2.. 17. 1.2 2.4 1.1 1.1 2 2 (DIN) 2 IL 4. 4. 4.. 2. 2 4 4 4.0.0.0 102 1..04. Note: The above attachments are produced as connector links for self assembly. with riveted attachments can be produced assembled-to-order in our South Carolina facility. DIN = German Standard Series Attachment 1-00 - 07071 Group: 00 American Metric Corporation 1 Page 4 Attachment Assemble to order Metric.pdf Date 0/0/1
Page Attachment Assemble to order Metric.pdf Date 0/0/1 Metric Attachments A2 WA-2 K2 WK-2 A2 & K2 Connector Links and Inner Links p b 2 g F B m D L G I F H s 2.2...2 17...2. 1.. 1 (DIN) 11. 2. 2. 4. 4. 14.1 1. 1.2.4. 1. 1. 2 2 (DIN) 1.7. 1.2.1.. 1.7 1.7 1. 1. 2..2 10.4 10. 1. 1. (DIN) 1. 2. 2.. 17. 0. 2. 1.4 1.1 1.1 2 2 (DIN) 2 IL 4. 4. 4.. 2 2.1 1.7 1. 1.7.0.0.0 102 1..04. 1.. 2 7..4 1 71. 10. 4.2 27 4. 1 44.4 0. 4. 27.4 7 0,000 1.1 1.1 44.4 44.4 1. 2. 1 0. 0. 4...2,000 2. 1.1 0. 0. 71.4 Note: The above attachments are produced as connector links for self assembly. with riveted attachments can be produced assembled-to-order in our South Carolina facility. DIN = German Standard Series Attachment American Metric Corporation Group: 00 1-00 - 07071
Page Attachment Assemble to order Metric.pdf Date 0/0/1 Agricultural Roller DIN/ISO P mm Between Plates Width Plates b 2 Roller Diameter Pin Diameter d 2 Hight Plates g Con. Link Width k Overall Width I 1 Breaking Strength N Weight kg/m 7.1 7.1 7 S 2 S S 2. 4..2.1 2. 11.4 14.27 1.24 4.47 7.01.74 1. 1. 17.. 2.7 4. 27,000 2,000 0.7 1.7 1. 7.2* 741.1 741.2 S 4.4 41.4 41.4.2.2 2. 2. 1.24 17.7 7.01.74.27 17. 17....,000 2,000 0,000 1. 1.4 2.11 741. 741.* 741. S S 41.4 41. 41.1.2.7 2. 2. 1. 17.7 1..74.0.74 17. 2. 17. 40. 2,000,000 2,000 1. 2. 1.7 7.1 7.1 S 77 S.4.27.2 2. 1.17 7.2 1.2..2.2 2.2 2.2.7.7 4. 0. 4,000 4,000 2..27 * = Straight Side Plates Attachment Link Types A4 = Bent attachment, one side, on inner plate. B4 = Bent attachment, two sides, on inner plate. D4 = Straight attachment, one side, on inner plate. E4 = Straight attachment, two sides, on inner plate A7 = Bent attachment, one side, on outside plate. B7 = Bent attachment, two sides, on outside plate. D7 = Straight attachment, one side, on outside plate. E7 = Straight attachment, two sides, on outside plate Ask for Our Agricultural Roller Catalog To See Special s and attachments For This Industry Note: The above attachments are produced as connector links for self assembly. with riveted attachments can be produced assembled-to-order in our South Carolina facility. American Metric Corporation Group: 00 1-00 -0110
Page 7 Attachment Assemble to order Metric.pdf Date 0/0/1 Assembled Extended Pin Roller Size ISO p Inner Width Overall Width b 2 Roller Diameter Pin Diameter d 2 h C. L. Extension k Plate Height g Breaking I 1 Extended Pin Dimensions I 2 I L 1 L 2 L Strength / x /1 1/2 x /1 / x / /4 x 1/2 40 0 0 0C 0A 10A A.2 1.7 7..4.7 7.47 11.1 1. 17.7.0 7. 11.1...0.4.. 4.1 4..1 1 1 7,00 14,100,0 1,00 1.2 17...0 0.1.7 4. 2. 4.2. 71.1 11.0 14. 1.4 24.2.. 7. 47 11.1 1. 1.4 24.2 1 x / 1-1/4 x /4 1-1/2 x 1 0 100 1 1A A 24A 1.7 1. 2.. 27.4..2 7.2. 11.1.4.1 24.1 0.1.2,700,00 7,000. 40.4 0. 1. 7..1 2 1.2 141. 0.1.2 4.2 0. 74.1 4 1..2 4.2 x 2. x 1/ / x 7/2 1/2 x /1 / x / 2 2 04B 0B 0B 0B 10B.2 1.7 2..0. 4.1. 1.2 4.0.0. 1. 2.1.2 4.4.0 2..1.. 4.1.0 7.1.2 11.,000,000 7.4. 1. 17 1. 14. 2.1 0.7.2 1..7 44. 2.. 11.0 1. 1.2.2.. 4.. 11.1 1. 1.0 /4 x 7/1 1 x 17 0 x 17 1-1/4 x /4 2 0.1 102 B 1B B 0 1. 1..0.2.2 10.1 4..4.4.1.7.0.0 41. 41. 7. 7. 7.0 1... 1.0... 40..4.4 7...7.7.7 x /4 1-1/2 x 1 1-/4 x 1-1/4 2 x 1-1/4.1 2 1 1 24B 2B 2B 44.4 0. 1. 0. 0. 27.0 7. 4. 4. 27.4. 10.1 14. 1. 17.1.1 7.4 7. 2.0.4 7.2,000 1 0,000,000..0.. 7.0 101. 2. 1.7 1 14.. 10. 41. 0. 0. 7..7 2 11. 41. 0.. 1.1 Extended Pin Description EPT = Triple span two sides (Overall width = I ) EPD = Double span one side (Overall width = I 2 ) EPX = Triple span one side (Overall width = I ) Note: PART NUMBERS FOR ASSEMBLED EXTENDED PIN ROLLER CHAIN DIFFERENT TNAN EXTENDED PIN ATTACHMENTS (SEE METRIC CHAIN ATTACHMENTS PAGE) Ask for Our Agricultural Roller Catalog To See Special s and attachments For This Industry 1-70 -00 Group: 70 American Metric Corporation
Page Attachment Assemble to order Metric.pdf Date 0/0/1 Assembled Extended Pin Roller Assembly Combinations Single with double span extended pins on one side Single with triple span extended pins on one side Single with double span extended pins on both sides Double with triple span extended pins on one side Double with triple span extended pins on both sides Size ISO p Inner Width Roller Diameter Pin Diameter d 2 h Transverse e e 1 Attachment Width M 1 M 2 C. L. Extension I 2 I Breaking Strength N x 2. x 1/ / x 7/2 / x 7/2 2 2 04B 0B 0B 0B-2.2.2 2. 4.. 1. 2.1.2.2..4 10.24 10.24. 4 7.24 7.24 4.1 4... 11.2 1. 2..1.. 1. 14. 2. 4,000,000 1,000 1/2 x /1 1/2 x /1 / x / / x / 2 2 0B 0B-2 10B 10B-2 1.7 1.7.. 4.4 4.4.0.0 1.2 1.2 1. 1. 10.1 10.1 11. 11. 1. 1. 2. 0.. 4.1 4.1 1.2 44. 2. 2,000 40,000 /4 x 7/1 /4 x 7/1 1 x 17 1 x 17 2 2 B B-2 1B 1B-2.2.2 1.4 1.4 1. 1. 1. 1... 1. 1. 4.. 4. 4..4.4.2 1.7.,000 10,000 1-1/4 x /4 1-1/4 x /4 1-1/2 x 1 1-1/2 x 1 102 02 2 B B-2 24B 24B-2 1. 1. 10.1 10.1 14. 14..4.4 4. 4....0.0 7. 7....1.1 7 101 11 10 170,000 1,000 American Metric Corporation Group: 70 1-70 - 00
Page Attachment Assemble to order Metric.pdf Date 0/0/1 Assembled Roller With Attachments or Extended Pins Part Numbering System for Assembled Extended Pin Roller Description Code Number (pitches) Single Span One Side EP1 Triple Span Two Sides EPT Double Span One Side EPD Triple Span One Side EPX Attachment every pitch T1 T1-EPT T1-EPT T1-EPD T1-EPX Attachment every 2nd outer link pitch T2-EL T2-EL-EPT T2-EL-EPT T2-EL-EPD T2-EL-EPX Attachment every rd pitch T T-EPT T-EPT T-EPD T-EPX Attachment every 4th outer link pitch T4-EL T4-EL-EPT T4-EL-EPT T4-EL-EPD T4-EL-EPX Attachment every th pitch T T-EPT T-EPT T-EPD T-EPX Attachment every th outer link pitch T-EL T-EL-EPT T-EL-EPT T-EL-EPD T-EL-EPX Attachment every 7th pitch T7 T7-EPT T7-EPT T7-EPD T7-EPX Attachment every th outer link pitch T-EL T-EL-EPT T-EL-EPT T-EL-EPD T-EL-EPX Attachment every th pitch T T-EPT T-EPT T-EPD T-EPX Attachment every 10th outer link pitch T10-EL T10-EL-EPT T10-EL-EPT T10-EL-EPD T10-EL-EPX Part Numbering System for Roller with Attachments Description Code Number (pitches) A1 K1 R SA1 SK1 A2 K2 SA2 SK2 Attachment every pitch T1 T1-A1 T1-K1 T1-R T1-SA1 T1-SK1 Attachment every 2nd outer link pitch Attachment every 2nd inner link pitch T2-EL T2-IL T2-EL-A1 T2-IL-A1 T2-EL-K1 T2-IL-K1 T2-EL-R T2-IL-R T2-EL-SA1 T2-IL-SA1 T2-EL-SK1 T2-IL-SK1 T2-EL-A2 T2-EL-K2 T2-EL-SA2 T2-EL-SK2 Attachment every rd pitch T T-A1 T-K1 T-R T-SA1 T-SK1 Attachment every 4th outer link pitch Attachment every 4th inner link pitch T4-EL T4-IL T4-EL-A1 T4-IL-A1 T4-EL-K1 T4-IL-K1 T4-EL-R T4-IL-R T4-EL-SA1 T4-IL-SA1 T4-EL-SK1 T4-IL-SK1 T4-EL-A2 T4-EL-K2 T4-EL-SA2 T4-EL-SK2 Attachment every th pitch T T-A1 T-K1 T-R T-SA1 T-SK1 Attachment every th outer link pitch Attachment every th inner link pitch T-EL T-IL T-EL-A1 T-IL-A1 T-EL-K1 T-IL-K1 T-EL-R T-IL-R T-EL-SA1 T-IL-SA1 T-EL-SK1 T-IL-SK1 T-EL-A2 T-EL-K2 T-EL-SA2 T-EL-SK2 Attachment every 7th pitch T7 T7-A1 T7-K1 T7-R T7-SA1 T7-SK1 Attachment every th outer link pitch Attachment every th inner link pitch T-EL T-IL T-EL-A1 T-IL-A1 T-EL-K1 T-IL-K1 T-EL-R T-IL-R T-EL-SA1 T-IL-SA1 T-EL-SK1 T-IL-SK1 T-EL-A2 T-EL-K2 T-EL-SA2 T-EL-SK2 Attachment every th pitch T T-A1 T-K1 T-R T-SA1 T-SK1 Attachment every 10th outer link pitch Attachment every 10th inner link pitch T10-EL T10-IL T10-EL-A1 T10-IL-A1 T10-EL-K1 T10-IL-K1 T10-EL-R T10-IL-R T10-EL-SA1 T10-IL-SA1 T10-EL-SK1 T10-IL-SK1 T10-EL-A2 T10-EL-K2 T10-EL-SA2 T10-EL-SK2 1-0 - 00 Group: 70 American Metric Corporation 2
Page 10 Attachment Assemble to order Metric.pdf Date 0/0/1 Special Roller Assembled To Order To insure customers receive what they need, when they need it, procedures for ordering chains assembled-toorder are established as follows: 1) Quantity of lengths (pieces) of chain required. 2) number Number or ISO Number. If this information is not available, the following information is required. Inner width Width of inner link b 2 Roller or bush diameter Transverse pitch e (only for multi-strand chain) Strands (single, double, triple or quadruple) ) Length of chain in feet / meters, or number of links. 4) Open ended chain (for C.L., O.L. or H.L connection) or endless (riveted connection). ) Attachment links, if required. a) Type of attachments. A1 K R SA SK EP or D1 Double hole / pitch attachments A2, K2, SA2, SK2 and EP2 (not shown) also available. 24 American Metric Corporation GROUP: 0 1-0 - 00
Page 11 Attachment Assemble to order Metric.pdf Date 0/0/1 b) Spacing "T" for attachments. Special Roller Assembled To Order Spacing based on pitches, such as "T4", every fourth pitch. Specify "EL" external attachment links (shown) or "IL" internal attachment links. Spacing based on pitches such as "T", every third pitch. In the case of an odd number of pitches, a combination of "EL" and "IL" links should be used. If both "EL" and "IL" links are not available, an "OL" offset link or "HL" half link is required. This can reduce the original strength by 0%, however. c) Specify "EL" external attachment links or "IL" internal attachment links. ) Matched and / or prestretched chains. s for use in pairs or sets are marked Strand A, Strand B, Strand C etc. s will generally be delivered in m coils, so matching lengths will be marked accordingly. Starting lengths A1, B1, C1 Starting A1 Starting B1 Starting A1 Starting B1 laterally reversed A2 (next) B2 (next) A2 (next) B2 (next) 1-0 - 00 GROUP: 0 American Metric Corporation 2
Custom s 1-0,70,0-000 Group: 0,70,0 American Metric Corporation 27 Page Attachment Assemble to order Metric.pdf Date 0/0/1
Page 1 Attachment Assemble to order Metric.pdf Date 0/0/1 Custom s 2 American Metric Corporation Group: 0,70,0 1-0,70,0-000
Page 14 Attachment Assemble to order Metric.pdf Date 0/0/1 Attachment Worksheet Completion of this sheet will help expedite your quote/order. Company name and address: Contact: Customer Account : Date: Phone: FAX: Description: Material: Steel Stainless Steel Nickel Other Size: Type: Single Double Triple Length of Strands: Feet/Meters Number of Strands: Attachment: A1 A2 R1 K1 K2 SA1 SA2 SK1 SK2 EP1 EP2 Number of Attachments: Indicate attachment position on the drawing below. Phone: (00) 7- FAX: (4) 7-1 1-00-70707 Group: 00 American Metric Corporation