JANUARY 2018 EDITION Timesaver cast iron drainage systems TRADE PRICE LIST Timesaver Heritage VortX
I N T R O D U C T I O N The Timesaver system, was first launched in 1973, for use on above ground soil and ventilating installations. In 1980 a below ground Timesaver system was launched to complement the soil range, and together they became market leaders in cast iron drainage. Both systems were recognised for their quality performance, and were awarded the highly coveted BSI Kitemark in 1982. Over the years, Sinclair works has maintained its programme of quality controls, and is licenced under BS EN ISO 9001, Quality Assurance in recognition of its high standard of production competence. RESPONSIBLE SUSTAINABLE MANUFACTURING Environment Standard BS EN ISO 14001: 2004 Saint-Gobain PAM UK manufacturing sites including 'Telford' have been awarded this accreditation. SG PAM UK operates Integrated Pollution and Preventative Control (IPPC) Regulations, and have implemented comprehensive environmental management systems. Q U A L I T Y CEMARS Certification (Certifed Emissions Measurement And Reduction Scheme) CEMARS demonstrates the company's commitment to measuring, managing, and reducing greenhouse gas emissions in a robust and credible way in compliance with ISO 140641:2006. SG PAM UK continues to exceed its carbon reduction targets. A S S U R A N C E BS EN ISO 9001: 2008 Registered No: FM12908 Timesaver Systems carry the B.S. Kitemark, providing the highest guarantee of product quality, reliability and safety. A strict quality control system is maintained throughout the company from purchasing of raw materials to the inspection and testing of products. Spontaneous checks made throughout the year by the BSI Inspectorate, ensure that the set standards are not allowed to fall. Timesaver carries the coverted British Standard Kitemark for above and below ground systems. BS 416: For soil, waste and ventilating pipes & fittings BS 437: For drain pipes & fittings BS 6087: For flexible joints for BS 416 Part 2 & BS 437 pipes & fittings C O N TA C T S Technical Advisory Service In support of the extensive manufacturing resources, an advisory service department is available to customers to provide technical assistance and guidance on soil and drain installations. Telephone Helpline: 01952 262529. Enquiries (Sales) Customer Services Tel: 0115 930 0681. Customer Services Fax: 0115 930 0638. 2 Website: www.saint-gobain-pam.co.uk Visit the website for a full insight into the products available, which contains all product literature for the Soil and Drain brands, Ensign, Timesaver and Classical including Ensign CAD drawings, and much more, to view or download in PDF format.
TD00 PIPE DOUBLE SPIGOT EF RATCHET SPANNER 191201 73.35 DRAIN x 3M 156568 173.54 150 x 3M 156832 321.23 225 X 3M 157042 961.57 EF098 T SPANNER (BOX) 191200 8.01 TD01 STANDARD COUPLING EF101 13 mm DEEP SOCKET 191202 18.45 191294 37.05 150 191295 44.89 225 191296 102.86 TD640 HANGING BRACKET OR WALL FIXING M12 GT96L CONTINUITY CLIP TO SUIT TD01 COUPLING PACK OF 25 191358 31.03 150 191359 32.79 225 (mild steel) 192374 93.52 191190 55.72 150 191190 55.72 TD06 MEDIUM RADIUS BENDS GT968 CONTINUITY CLIP TO SUIT TD01 COUPLING PACK OF 25 TD02 STEPPED COUPLING 225 191193 89.08 191297 38.44 150 191298 46.79 GT96T CONTINUITY CLIP TO SUIT TD02 COUPLING PACK OF 25 191191 61.24 GT96T6 CONTINUITY CLIP TO SUIT TD02 COUPLING PACK OF 25 TD07 MEDIUM RADIUS BEND WITH HEEL REST x 87.5 191219 69.33 x 80 191218 74.05 x 67.5 191217 74.05 x 60 191216 69.33 x 45 191215 58.92 x 35 191214 58.92 x 22.5 191213 58.92 x 10 191212 58.92 150 x 87.5 191225 159.52 150 x 67.5 191224 159.52 150 x 45 191223 127.66 150 x 35 191222 159.52 150 x 22.5 191221 119.53 150 x 10 191220 119.53 225 x 87.5 191229 483.98 225 x 45 191228 483.98 225 x 22.5 191227 483.98 225 x 10 191226 483.98 x 87.5 191230 79.52 150 x 87.5 191231 210.27 150 191192 66.86 Highlights fittings made to order. Prices exclude VAT 3
4DRAIN TD08 MEDIUM RADIUS BEND REAR ACCESS TD09 MEDIUM RADIUS BEND SIDE ACCESS TD15 LONG RADIUS BEND TD22 LONG RADIUS BEND WITH HEEL REST TD102 BEND LONG TAIL TD104 BEND L ONG TAIL x 87.5 191233 152.17 x 45 191232 149.27 150 x 87.5 191235 338.24 150 x 45 191234 364.57 225 x 87.5 191237 741.48 225 x 45 191236 741.48 x 87.5 191239 192.63 x 45 191238 182.10 150 x 87.5 191241 338.24 150 x 45 191240 384.90 225 x 87.5 191243 723.43 225 x 45 191242 723.43 x 87.5 191244 114.57 150 x 87.5 191245 217.73 x 87.5 191246 123.18 150 x 87.5 191247 235.17 x 87.5 x 815 191289 175.72 x 87.5 x 850 197173 430.08 150 x 87.5 x 850 192699 693.42 TD37 BRANCH PLAIN x x 87.5 191250 91.96 x x 67.5 191249 96.82 x x 45 191248 91.96 150 x x 87.5 191252 198.62 150 x x 45 191251 207.91 150 x 150 x 87.5 191254 226.96 150 x 150 x 45 191253 226.96 225 x x 87.5 191256 587.85 225 x x 45 191255 587.85 225 x 150 x 87.5 191258 626.97 225 x 150 x 45 191257 626.97 225 x 225 x 87.5 191260 696.90 225 x 225 x 45 191259 696.90 TD51 BRANCH RIGHT HAND ACCESS x x 87.5 191262 212.16 x x 45 191261 212.16 150 x x 45 191263 375.53 150 x x 87.5 191264 391.67 225 x x 45 191265 886.15 225 x 150 x 87.5 191267 914.31 225 x 150 x 45 191266 914.31 225 x 225 x 87.5 191269 971.99 225 x 225 x 45 191268 971.99 TD52 BRANCH ACCESS REAR x x 87.5 191271 212.16 x x 45 191270 222.37 150 x x 45 191272 375.53 150 x x 87.5 191273 391.67 225 x x 45 191274 886.15 225 x x 87.5 191275 886.15 225 x 150 x 87.5 191276 914.31 225 x 225 x 87.5 191278 971.99 225 x 225 x 45 191277 971.99 TD53 BRANCH LEFT HAND ACCESS x x 87.5 191280 222.37 x x 45 191279 222.37 150 x x 45 191281 375.53 150 x x 87.5 191282 391.67 225 x x 45 191283 886.15 225 x x 87.5 191284 886.15 225 x 150 x 87.5 191286 914.31 225 x 150 x 45 191285 914.31 225 x 225 x 87.5 191288 971.99 225 x 225 x 45 191287 971.99 Highlights fittings made to order.
TD447 BRANCH DOUBLE PLAIN TD425 CLEARING ARM BEND DRAIN 191293 156.37 x 45 191292 134.20 x x 87.5 TD56 ACCESS PIPE TD42 TRANSITIONAL PIPE SOCKET FOR CLAYWARE TD41 DIMINISHING PIPE *Connects to 200mm Ensign *Connects to 200mm Ensign TD36 SOCKET FERRULE WITH C.I. CAP 191344 171.28 150 191345 312.75 225 191346 759.72 150 x 191333 90.36 225 x 191334 231.69 225 x 150 191335 231.69 *225 x 200 191336 206.47 *225 x 250 192431 215.03 Now rationalised. Please use alternative Ensign product EF059 for mm PROD.. 156650 TD43 mm TR ANSITIONAL PIPE SOCKETFOR WC NOW RATIONALISED Please use alternative Ensign product EF059 PROD.. 156650 TD47 TRANSITIONAL PIPE SOCKET FOR C. I. TO BS 437 191330 116.96 191341 97.43 150 191342 124.76 225 191343 372.94 T D34 BLANK CAP PLAIN 191326 29.81 150 191327 56.87 225 191328 261.86 TD118 TRANSITIONAL PIPE ADAPTOR FROM TIMESAVER DRAIN TO SUPERSLEEVE 191350 47.85 150 191351 83.79 For BSP blank cap connection use GT71 and stepped coupling TD02 TD60 GULLY TRAP PLAIN x 87.5 191399 91.96 150 x 87.5 191400 228.85 x 45 191398 212.99 x 180 191397 125.66 Highlights fittings made to order. Prices exclude VAT 5
6DRAIN TD107 GULLY TRAP WITH SURFACE ACCESS TD64 GULLY TRAP WITH 225 INLET TD475 RUNNING TRAP WITH DOUBLE ACCESS TD500 GULLY INLET PLAIN TD105 GULLY INLET WITH HORIZONTAL BRANCH TD106 GULLY INLET WITH VERTICAL BRANCH x 87.5 191402 231.59 x 87.5 191401 195.46 191404 458.41 150 191405 781.71 225 191406 2244.33 Body only 191301 95.79 x 191299 128.70 Body only x 191300 128.70 Body only TD525 RAISING PIECE PLAIN x 150 high 191303 263.87 x 300 high 191305 263.87 TD612 PLAIN GRATE TD613 SOLID COVER 200 191385 11.74 200 191386 51.74 TD614 HINGED & LOCKING GRATE TD615 SEALED PLATE & FRAME TD616 SEALED PLATE & FRAME 200 191387 185.71 200 191388 94.43 200 191389 103.90 TD678 RAISING PIECE PLAIN 75 high 191363 123.19 115 high 191365 140.33 150 high 191364 163.49 225 high 191366 173.83 300 high 191367 181.39 TD108 RAISING PIECE WITH INLET TD111 RAISING PIECE WITH 3 x 90 INLETS 225 high 191347 191.09 225 high 191348 442.35
TD684 GULLY INLET PLAIN 191368 135.56 150 191369 152.92 TD467 TRAPLESS GULLY 87.5 x outlet 191403 226.29 DRAIN TD120 GULLY INLET WITH INLET x 191352 176.43 TD550 DEANS TRAP 600 DEEP 87.5 x outlet 191407 455.58 galv. sediment pan 191181 166.13 TD123 GULLY INLET WITH 3 x 90 INLETS x 191353 293.25 TD551 GULLY TRAP 425 DEEP 87.5 x outlet 191408 331.18 galv. sediment pan 191182 153.63 TD650 LIGHT GRATE 265 dia 191390 26.33 TD553 GULLY TRAP SQUARE TOP 225 x 225 TD651 HEAVY GRATE 87.5 x outlet 191381 313.64 galv. sediment pan 191183 64.67 grate to suit 191380 144.05 TD653 HINGED & LOCKING GRATE 265 dia 191391 44.89 265 dia 191360 262.26 TD554 GARAGE 300 x 600 DEEP 87.5 x outlet 191410 967.02 galv. sediment pan 191184 212.37 grate to suit 191382 114.49 Available with 1, 2 or 3 Fresh Air Inlets - P.O.A. TD661 SEALED PLATE & FRAME 265 dia 191361 87.28 TD559 RAISING PIECE FOR TD554 75 high 191354 194.02 150 high 191356 223.83 300 high 191355 330.61 TD556 GARAGE 225 x 600 DEEP TD662 GREASE SEALED COVER & FRAME 87.5 x outlet 191409 353.55 galv. sediment pan 191181 166.13 265 dia 191362 243.02 Prices exclude VAT 7
8DRAIN TD558 GARAGE GULLY 325 x 600 DEEP TD114 RAINWATER SHOE WITH HORIZONTAL OUTLET TD793 RAISING PIECE FOR TD114 TD790 GRATE FOR TD114 & 793 TD791 HINGED & LOCKING GRATE FOR TD114 & 793 TD792 GREASE SEALED COVER & FRAME FOR TD114 & 793 TD795 HI NGED & LOCKING COVER & FRAME FOR TD114 & 793 87.5 x outlet 191418 1077.07 galv. sediment pan 191185 163.79 grate to suit 191383 180.79 191349 278.86 300 high 191378 290.98 191374 84.06 191375 118.76 191376 199.50 191379 213.77 TD561 ROADWAY GULLY WITH HI NGED GRATE & FRAME TD724 AIRTIGHT INSPECTION EYE COVER TD756 ANTI-FLOODING VALVE TD777 LOOSE PUDDLE FLANGE TD706 GREASE TRAP WITH WITH SINGLE SEAL COVER (FOR INTERNAL & EXTERNAL USE) TD708 GREASE TRAP OUTLET FOR USE WITH TD706 225 191357 726.37 191394 160.82 150 191395 182.22 225 191421 726.37 191371 79.12 150 191372 84.98 225 191373 238.12 body 191419 942.78 cover 191393 203.09 galv. sediment pan 191187 137.67 87.5 outlet 191370 299.08
I NSPECTION CHAMBERS TRADITIONAL BS 437 FITTINGS DRAIN TD14 ONE BRANCH EACH SIDE x 191306 324.15 150 x 191307 419.98 150 x 150 191308 532.94 225 x 191309 1494.80 225 x 150 191310 1617.59 225 x 225 191311 1994.33 477 INTERCEPTING TRAP 479 INTERCEPTING TRAP fitted with plug 191602 760.64 150 fitted with plug 191603 1169.79 fitted with plug 191605 7.93 TD17 TWO BRANCH EACH SIDE x 191312 638.11 150 x 191313 852.94 150 x 150 191314 1064.18 225 x 191315 2228.75 225 x 150 191316 2267.99 225 x 225 191317 3063.35 481 INTERCEPTING TRAP Can be supplied with mm Fresh Air Inlet LH or RH 191607 855.30 150 191610 1230.53 P.O.A. TD750 ANTI - FLOOD TRUNK VALVE EUREKA 150 191420 2972.11 750 EUREKA ANTI -FLOODI NG TRUNK VALVE 191593 2640.95 225 191594 7516.06 300 191870 13761.70 752 EUREKA ANTI -FLOODI NG TRUNK VALVE 191595 3510.83 150 191596 4380.72 225 191597 9274.60 TRADITIONAL BS 437 FITTINGS 755 FLOODING BALL VALVE 585 CREGREEN FRESH AIR INLET 191590 590.42 191598 150 191599 225 191600 2540.21 3335.61 7363.86 589 VENTILATING HEAD 191591 407.84 VX-F950 SQUARE BELL TRAP 191396 1743.76 591 FRESH AIR INLET VORTX RANGE 191592 445.90 Highlights fittings made to order. Prices exclude VAT 9
FLOOR DRAINAGE S SELECTED FITTINGS FLOOR GULLIES UNTRAPPED VX-F200 Medium Sump 110mm 4" BSP VX-F210 Sumpless Body 110mm/NPSM FLOOR GULLIES - TRAPPED VX-F220/VX-F230 VX-F220 110mm VX-F205 Clamping ring to suit floor gullies 205mm 227119 227118 18.83 23.12 227120 21.97 227129 59.67 VX-F230 110mm 227130 59.67 233440 8.35 VORTX FLOOR DRAIN GRATINGS - 150mm CIRCULAR VX-F010 Nickel Bronze VX-F020 Stainless Steel GRATINGS - 150x150mm SQUARE VX-F030 Nickel Bronze VX-F040 Stainless Steel Gratings can be supplied polished GRATINGS FOR VINYL FLOORS 150mm CIRCULAR VX-F070 Nickel Bronze VX-F080 Stainless Steel 227049 233415 227050 233407 227101 233408 227102 233421 227111 233434 227112 233435 55.43 55.43 101.37 101.37 60.14 60.14 101.37 101.37 89.70 89.70 144.52 144.52 RODDING EYES ADAPTORS VX-F500 BSP Spigot adaptor VX-F075 Nickel Bronze 227113 233438 103.51 103.51 215mm x 110mm to 4" 227131 17.37 215mm x 56mm to 2" 234207 11.00 VX-F085 Stainless Steel Gratings can be supplied polished 227114 233439 153.26 153.26 RODDING EYES - CIRCULAR 150mm Rodding Eyes can be supplied polished CONCENTRIC/ECCENTRIC ADAPTORS VX-F501 NEW VX-F015 Nickel Bronze 227105 233426 57.54 57.54 300mm x 80mm to 4" BSP Eccentric 300mm x 80mm to 4" BSP Concentric 300mm x 60mm to 4" BSP Concentric 256614 256613 25.22 256615 25.22 20.85 VX-F025 Stainless Steel VX-F035 Nickel Bronze 227106 233427 227107 233428 126.86 126.86 62.27 62.27 RAISING PIECES VX-F350 VX-F045 Stainless Steel Gratings can be supplied polished INSERTS VX-F400 ABS 50mm Removable Bottle Trap 227108 233430 227128 126.86 126.86 22.00 20-40mm NPSM 40-95mm NPSM 95-140mm NPSM 227121 227122 227123 22.33 28.00 34.63 VX-F410 Stainless Steel Filter Basket 227138 24.33 10 Gullies/Spigot Adaptors: Note all connections to TD0/GT pipework via stepped couplings TD02 BAG OF 4 SECURITY SCREWS & ALLEN KEY VX-F420 233455 4.63 For full range options and shower drains see Ensign price list or visit www.pam-vortx.co.uk
SOIL GT00 PIPE DOUBLE SPIGOT GT02 SHORT RADIUS BEND PLAIN 50 x 3M 156366 96.65 75 x 3M 156456 108.10 x 3M 156567 130.68 150 x 3M 156831 272.85 50 x 87.5 191620 29.38 75 x 87.5 191622 33.24 x 87.5 191631 40.68 150 x 87.5 191634 72.63 x 67.5 191625 40.68 50 x 45 191619 29.38 75 x 45 191621 33.24 x 45 191626 40.68 150 x 45 191632 72.63 x 11 191628 35.06 GT01 STANDARD COUPLING 50 191691 16.67 75 191692 18.42 191693 24.05 150 191694 48.01 GT96S CONTINUITY CLIP TO SUIT GT01 COUPLING PACK OF 25 50 191189 50.63 75 191189 50.63 191189 50.63 GT03 SHORT RADIUS BEND REAR ACCESS 50 x 87.5 191636 72.43 75 x 87.5 191638 78.57 x 87.5 191642 86.03 150 x 87.5 191644 122.18 75 x 45 191637 78.57 x 45 191640 86.03 150 x 45 191643 122.18 GT96L CONTINUITY CLIP TO SUIT GT01 COUPLING PACK OF 25 150 191190 55.72 GT04 SHORT RADIUS BEND SIDE ACCESS GT12 CONVERSION COUPLING x 87.5 191646 86.03 65 x 75 191695 19.51 *70 x 75 191429 19.51 90 x 191696 25.13 *Connects to 70mm Ensign EF RATCHET SPANNER EF098 T SPANNER (BOX) 191201 73.35 191200 8.01 GT02L LONG & MEDIUM RADIUS BEND PLAIN 75 x 87.5 191623 66.68 x 87.5 191630 65.86 150 x 87.5 191635 143.61 x 45 191627 70.33 x 22.5 191624 65.86 150 x 22.5 191633 150.53 x 5 191629 40.68 EF101 13 mm DEEP SOCKET 191202 18.45 GT03L LONG & MEDIUM RADIUS BEND REAR ACCESS GT48 WALL FIXING BRACKET GT48 can be fitted with acoustic dampener to order 50 191720 11.17 75 191721 12.24 191722 12.54 150 191723 23.23 75 x 87.5 191639 98.51 x 87.5 191641 111.28 150 x 87.5 191645 196.02 Prices exclude VAT 11
SOIL GT04L LONG RADIUS BEND SIDE ACCESS GT43 BEND LONG TAIL x 87.5 191647 111.28 GT07 BRANCH REAR ACCESS 50 x 50 x 87.5 191665 96.31 75 x 50 x 87.5 191666 96.31 75 x 75 x 87.5 191668 96.31 x 50 x 87.5 191670 108.29 x 75 x 87.5 191672 108.29 x x 87.5 191674 108.29 150 x x 87.5 191676 193.74 150 x 150 x 87.5 191678 230.50 x x 45 191673 108.29 150 x x 45 191675 209.96 x 87.5 x 250 191688 52.54 GT08 BRANCH RH SIDE ACCESS x x 87.5 191679 108.29 GT55 BEND LONG TAIL x 87.5 x 815 191689 180.13 GT09 BRANCH LH SIDE ACCESS x x 87.5 191680 108.29 GT06 BRANCH PLAIN 50 x 50 x 87.5 191649 44.21 75 x 50 x 87.5 191651 50.05 75 x 75 x 87.5 191653 50.05 x 50 x 87.5 191655 62.90 x 75 x 87.5 191657 62.90 x x 87.5 191660 62.90 150 x x 87.5 191662 119.25 150 x 150 x 87.5 191664 155.87 x x 67.5 191658 62.90 50 x 50 x 45 191648 44.21 75 x 50 x 45 191650 56.64 75 x 75 x 45 191652 61.09 x 50 x 45 191654 62.90 x 75 x 45 191656 71.05 x x 45 191659 62.90 150 x x 45 191661 174.95 150 x 150 x 45 191663 155.87 GT10 BRANCH DOUBLE PLAIN 75 x 75 x 87.5 191681 74.32 x x 87.5 191683 77.78 150 x x 87.5 191684 219.01 x x 45 191682 77.78 GT11 BRANCH DOUBLE ACCESS GT32 x x 87.5 191685 123.17 PARALLEL BRANCH x 191686 76.72 GT56 BRANCH LONG TAIL x x 87.5 x 915 191690 174.20 GT35 CORNER BRANCH x 191687 110.57 12
GT06 BRANCH WITH 1 x 50mm BSPT BOSS GT70 BLANK CAP PLAIN SOIL Back x 191743 84.24 RH x 191745 84.24 LH x 191744 84.24 50 191724 10.21 75 191725 12.75 191726 12.35 150 191727 17.86 BOSS BACK BOSS RH BOSS LH GT14 ACCESS PIPE ROUND DOOR 75 191697 70.71 191698 74.32 150 191699 123.63 GT71 BLANK CAP 50mm CONNECTION (Push-fit) EF071R UNIVERSAL CONNECTOR (EPDM) 75 191728 25.10 191729 26.94 150 191731 32.37 (D/T 50mmBSPT) 1 00 191730 30.50 GT15 ACCESS PIPE SQUARE DOOR 56 48 40 50 x 56/48/40 155759 14.33 (OD Dimension) 191700 146.43 150 191701 224.15 GT34 P TRAP PLAIN 191714 65.21 GT24 OFFSET GT28 TAPER GT73 ROOF VENT CONNECTOR FOR ASPHALT 75 x 75 projection 191702 43.38 75 x 115 191704 47.69 75 x 150 191703 56.02 x 75 191705 42.80 x 115 191709 60.40 x 150 191706 60.40 x 225 191707 69.02 x 300 191708 65.86 75 x 50 191710 40.43 x 50 191711 51.31 x 75 191712 51.31 150 x 191713 99.88 GT37 P TRAP WITH HEEL ACCESS GT483 BELLMOUTH GULLY INLET 50 (no support lug) 191715 99.79 75 (no support lug) 191716 99.79 191717 110.60 150 191718 193.11 191737 94.38 grate to suit 191385 11.74 ED078 LOOSE PUDDLE FLANGE 191733 70.26 * 191829 70.46 * Grey Epoxy Coated Prices exclude VAT 13
SOIL TIMESAVER HERITAGE GT106 BOSS PIPES 150 LONG SINGLE BOSS - 50mm WASTE COMPRESSION JOINT 50 150 50 x 3M 156366 96.65 75 x 1.8M (6ft) x 1.8M (6ft) 206854 192423 70.67 83.06 50 75 192418 206855 192421 26.41 29.01 30.35 50 75 192417 206856 192420 27.22 29.88 32.96 50 75 192419 206836 192422 34.21 35.54 39.96 156133 4.92 156132 15.76 192333 42.43 192363 42.43 GT00 PIPE DOUBLE SPIGOT 192236 192237 192239 60.84 72.63 118.56 191739 192238 60.84 74.91 (D/ T 50mm BSPT) 75 HERITAGE COUPLINGS GT05P No Ears GT109 BOSS PIPES 150 LONG 2 x 50mm BOSSES OPPOSED COMPRESSION JOINT GT05E Eared 150 192240 192360 93.95 134.21 GT115 BOSS PIPES 150 LONG 2 x 50mm BOSSES AT 90 COMPRESSION JOINT GT05S Slip 192241 93.95 Single Gasket to suit mm PFJ REDUCING GASKET TO SUIT PFJ GT133 STRAP ON BOSS To suit PFJ x 90 Reduces PFJ to 90mm Soil Pipe 192323 ACCESSORY TOOLS (FOR USE WITH GT133) HOLE SAW ARBOUR WITH DRILL 64mm HOLE SAW FOR CAST IRON PILOT DRILL 192327 192326 192328 59.66 42.88 43.02 10.80 GT132 BOSS PIPES 240 LONG 2 x 50mm BOSSES IN LINE PUSH-FIT CONNECTION 191742 94.92 EF053 BRACKET TO SUIT PUSH To suit mm FIT JOINT Eared EC001E/GT05E EF053A BRACKET (WITH EXTENDED ARM x 450 CAST IRON WALL SPACER PLATE 50 192424 75 206838 192425 6.02 6.02 6.02 To suit eared Push-Fit Joints GT05E LUBRICANT 500g TUB 199037 20.46 Jointing method of Timesaver Heritage 1 1. Apply a small amount of lubricant (i.e. lubricant prod. code 199037) on the lip of the rubber gaskets, both ends, to ease insertion of pipe/fittings. 2 3 2. Push joint over the end of pipe/fitting, ensuring the central register is abutted against the spigot edge evenly. If the joint is eared, fix to wall using anti-corrosion coach screws or similar. 3. Push the second pipe or fitting into the gasket again ensuring that the spigot is abutted 14 The rubber seals are factory fitted to the socket, and a suitable lubricant is recommended to ease assembly. Spigot Adaptors see Page 10 Prices exclude VAT
VORTX ROOF OUTLETS VERTICAL ROOF OUTLETS VX-R with FLAT GRATE VX-R105 with DOME GRATE 110mm 241181 98.89 Loading Class K3 Flow rate 10.7 L/S VX-R150 with FLAT GRATE mm 241180 98.89 Loading Class L15 Suitable for Car Parks 4" BSP 241182 104.55 6" BSP 247428 203.39 Loading Class L15 Suitable for Car Parks VX-R155 with DOME GRATE BALCONY ROOF OUTLETS VX-R300 with FLAT GRATE 4" BSP (10.7 L/S) 241183 6" BSP (14.5 L/S) 247418 104.55 203.39 mm 241184 84.78 HORIZONTAL ROOF OUTLETS 88º VX-R250 with FLAT GRATE 4" BSP 255262 110.76 VX-R255 with DOME GRATE 4" BSP 255261 110.76 ANGLED ROOF OUTLETS 45º VX-R251 with FLAT GRATE 4" BSP 255250 110.76 VX-R256 with DOME GRATE 4" BSP 255249 110.76 VX-R305 with NOTCHED GRATE 110 x (mm) 241187 84.78 110 x 75 (mm) 241186 84.78 x 50 (mm) 241185 84.78 RAISING PIECES VX-R710 to suit vertical outlets 285mm x 75mm high 241193 39.56 VX-R350 with FLAT GRATE 4" BSP 241188 96.08 VX-R720 to suit balcony outlets 63mm effective height 241194 39.56 VX-R355 with NOTCHED GRATE 4" BSP x 241191 96.08 4" BSP x 75 241190 96.08 4" BSP x 50 241189 96.08 TWO WAY OUTLETS 4" BSP with STEEL GRATE ANGLED 241192 80.25 FLAT 247964 81.94 BOXED 248015 82.51 ADAPTORS VX-F500 300mm x 160mm to 6" 215mm x 110mm to 4" 215mm x 56mm to 2" NOTE: Other lengths are available to order NEW CONCENTRIC/ECCENTRIC ADAPTORS VX-F501 300mm x 80mm to 4" BSP Eccentric 300mm x 80mm to 4" BSP Concentric 300mm x 60mm to 4" BSP Concentric 247429 227131 64.01 17.37 234207 11.00 256614 25.22 256615 25.22 256613 20.85 VX-R510 TWO WAY DOWN SPOUT Push-fit 253762 56.50 Gravel Guard Stainless Steel 247752 62.73 For smaller diameter contact Technical Dept. 01952 262529 15
Products and services available from Saint-Gobain PAM UK: Please visit our website: www.saint-gobain-pam.co.uk to download electronic versions or to request hard copies of any of our brochures. Technical Enquiries Tel: +44 (0)1952 262529 Fax: +44 (0)1952 262592 Email: technical.soildrain. uk.pam@saint-gobain.com Sales Enquiries Tel: +44 (0)115 930 0681 Fax: +44 (0)115 930 0648 Email: sales.uk.pam@saintgobain.com Ensign Cast Iron Drainage Classical Rainwater Cast iron above and below ground drainage systems kitemarked approved to BS EN877. Traditional range of cast iron rainwater and gutter systems to BS 460. Head Office Lows Lane Stanton-by-Dale llkeston Derbyshire DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Quality Assurance Quality Management Systems BS EN ISO 9001 :2008 (Registered firm: 12908) VortX Drainage Products VortX Steel Channels A new generation of roof and floor drainage products designed in accordance with BS EN 1253. A range of stainless steel floor gullies and channels for commercial and public buildings. Access Covers and Gratings Water and Sewer UK manufactured high performing and innovative ductile iron access covers and grating solutions. Ductile iron pipes & fittings for portable water and sewerage applications. Environmental Standard Environmental Management Systems BS EN ISO 14001 :2004 visit: www.saint-gobain-pam.co.uk The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2017 Saint-Gobain PAM UK. Local Distributor