LIGHTPLANE LINEAR DEEP 2.5 LPLD2.5 Find additional images and information at alwuk.com
1. BASE MODEL LPLD2.5SI suspended indirect LPLD2.5SD suspended direct LPLD2.5WI wall-mount indirect LPLD2.5WD wall-mount direct LPLD2.5SMB wall/surface, back-mounted, front-facing Page 2 of 5 Type: 2. RUN LENGTH/ SIZE Individual (0.5m, 1m, 1.2m, 1.5m, 1.8m, 2.4m...) Continuous row or Configuration 1 (enter total linear length, ex: 6M) 3. LAMPING LOW 3 MED 3 HI 3 WIDE-LOW 3 WIDE-MED 3 WIDE-HI 3 OSRAM CV TUNE RGBW 1 A configuration is a custom shape (rectangle square, L, etc.) with mitered corners. All lengths are nominal and may vary based on lamping and other specfication selections. Consult factory when exact lengths are required. SINGLE ROW LED Low-output, high-performance LED 4 1294 delivered lm/m, 15W/M, 86 lm/w Medium-output, high performance LED 4 1757 delivered lm/m, 21W/M, 83 lm/w High-output, high-performance LED 4 2523 delivered lm/m, 33W/M, 77 lm/w WIDE TRIPLE ROW LED Low-output, high-performance LED 4 1710 delivered lm/m, 18W/M, 95 lm/w Medium-output, high-performance LED 4 3262 delivered lm/m, 37W/M, 88 lm/w High-output, high-performance LED 4 4450 delivered lm/m, 55W/M, 81 lm/w ADDITIONAL LED OPTIONS (LINK for options) Constant voltage LED (link for options) Hevlar Tunable White Linear LED Module, 2700K-6500K 80+ CRI 23.5W/M 4 Macadam steps 2700K = 4 2015 delivered lm/m 6500K = 4 2157 delivered lm/m RGB+WHITE LED 3900-4300K 4 575 delivered lm/m 24V 26.9W/M 2 LED board options may be limited and/or subsituted to accomodate requests for exact, non-standard overall run lengths (ex: 1430). Consult factory. 3 Performance calculations based on test results of option at 4000K 4 LOR is 57% for the LPLD2.5 fitting (with EXT diffuser). Delivered lumens are quoted. FLUORESCENT T5-HE T5-HO T5-LXHE 5 T5-LXHO 5 Lamps not provided Standard output, 1-lamp profile T5 High output, 1-lamp profile T5 Standard output, 1-lamp profile T5, staggered High output, 1-lamp profile T5, staggered 5 For staggered lamping, EXT lens is recoended for maximum diffusion properties
4. SPOTS (OPTIONAL) LED SPOTS xx-7w25 xx-7w40 xx-13w25 xx-13w40 NOSPOTS 7W & 13W DIRECT DOWNLIGHT SPOTS (NOT ADJUSTABLE) specify total quantity - 7W - 25degree beam specify total quantity - 7W - 40degree beam specify total quantity - 13W - 25degree beam specify total quantity - 13W - 40degree beam no spots Page 3 of 5 5. DRIVER LED 1-10V 1-10V diing DALI DALI diing DMX DMX diing TRIAC Triac Diing NONDIM Non-diable OTHER (Consult factory for options) 6. LENS/LOUVER FLUORESCENT STD Standard, non-diing FL-1-10V Diing, 1-10V FL-DALI DALI Diing WD - FLAT WD - DROP EXT - FLAT EXT - DROP PRI DG Frosted Opal - Flat Frosted Opal - Drop Extra Frosted White - Flat Extra Frosted White - Drop Prismatic Lens - Flat For indirect only, clear dust guard 7. FINISH AL BK WH RAL/ CHROME BRONZE Standard, natural Ultimatte aluminium Black powdercoat White powdercoat Specify RAL powdercoat code (ex: #RAL/3003) Chrome Plating Bronzed Finish 8. VOLTAGE 220 220/240 volt UNV Universal voltage OTHER (Consult factory for options) 9. CANOPY NC No Canopy for Wall or Surface mounted STD Standard Canopy & Separate Suspension COMBO Combo Suspension Canopy SMALL Small Canopy & Separate Suspension 10. ADDITIONAL OPTIONS NONE EM OS PIR MWS ACT+ DALIEM DALIEMPRO None 3-Hour - Integral Emergency Kit Occupancy sensor Passive Infrared sensor (LINK for options) Microwave Motion Sensor (LINK for options) ACTIVE+ - Smart Sensor System (LINK for options) 3 hour - DALI Integral Emergency Driver/Battery 3 hour - DALI EMPRO Integral Emergency Driver/Battery
DIMENSIONS Page 4 of 5 80 92 63 63 WITH FLAT LENS (EXT, WD OR PRI) WITH DROP LENS (EXT, OR WD) MOUNTING OPTIONS SUSPENDED DIRECT (LPLD2.5SD) SUSPENDED INDIRECT (LPLD2.5SI) WALL MOUNT DIRECT (LPLD2.5WD) WALL MOUNT INDIRECT (LPLD2.5WI) SURFACE MOUNT DIRECT (LPLD2.5SMB)
HOUSING 100% recyclable, extruded architectural grade T6061 aluminium. EMERGENCY Luminaires can be wired for emergency circuit and/or emergency battery backup. Consult factory for options. LINEAR LENS OPTIONS Page 5 of 5 Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with minimal-to-no source visibility. WD is lightly frosted with greater light output, but possible source visibility. PRI is a prismatic lens. SUSPENSION HARDWARE FLAT LENS DROP LENS SPOTS (OPTIONAL) STD - Standard separate 115 diameter power canopy & suspension. COMBO - 115 diameter power canopy & suspension are combined. SMALL - 82 diameter small separate power canopy & suspension. Default canopy finish is to match fitting color, unless otherwise specified. FINISH Standard finish is "Ultimatte" aluminium a smooth, clean and durable finish achieved from a deepetch and two-step clear anodising process. White, Black, RAL powdercoat options and Chrome Plating, Bronzed finish also available. OPTIONS ALUMINIUM AL WHITE WH CHROME CHROME BRONZE - BRONZE MITERED CORNERS Consult factory for mitered corner angle options. BLACK BK COLOR RAL