2014 North America, Latin America & Asia Pacific Effective January, 2014 Supersedes all previous issues INCREMENTAL ABSOLUTE E N C O D E R S PRICE LIST ACURO TM brand Dynapar TM brand NorthStar TM brand What's Inside: ACURO brand Encoders, Table of Contents...Page 1 Dynapar brand Encoders, Table of Contents...Page 1 NorthStar Encoders, Table of Contents...Page 3... Inside Front Cover - Page C2 Terms and Conditions... Inside Rear Cover - Page C3 INNOVATION - CUSTOMIZATION - DELIVERY 1.800.873.8731 www.dynapar.com
PRICE LIST CONTENTS Dynapar brand, Encoders Table of Contents... Page 1 ACURO brand, Encoders Table of Contents... Page 1 NorthStar brand, Encoders Table of Contents... Page 3... Inside Front Cover - Page C2 Terms and Conditions... Inside Rear Cover - Page C3 HOW TO USE THIS PRICE LIST This publication provides price and availability information as a supplement to Danaher Sensors & Controls encoder catalog. Refer to the catalog pages for complete product specifications, features, application information, etc., and to specify the model numbers that meet your application requirements. The Encoder Pricing Section of this publication can be used to specify and determine prices for custom models of encoders. All prices in US Dollars. MINIMUM ORDER VALUE Orders with a total value of less than US$50.00 net cannot be accepted. RETURNS POLICY The "RC" column of this price list designates product return policy: "R": returnable if of current design and in original packaging "N": nonreturnable except under warranty. Returned products will be subject to a 25% restocking Charge. SHIPPING ORIGIN Products are shipped from point of manufacture. ORDERING METHODS This price list includes complete model numbers and list prices for a wide selection of products that should meet most of your application requirements. Some encoder products, however, are available with a more complex combination of features. In these cases, refer to the Encoder Pricing Section for determining the specific part number required. Cost is then determined by adding listed option charges to the series base price. PRODUCT AVAILABILITY The "LT" (Lead Time Days) content of this price list shows the number of working-days typically required to ship a product in 1 to 5 piece quantity. Expedited shipment is possible for products listed as having 3 or 5 day standard lead time. This service is subject to a Guaranteed Expedited Shipment Adder, plus shipping carrier charges and delivery commitment. Your request for Same-Day, Next-Day, or Second-Day (business days), or other deviation from standard lead time may be submitted to a Dynapar Customer Service Representative who will coordinate your requested shipment with our manufacturing department and confirm availability of expedite. The quantity of each item, and/or the number of differing items ordered, may effect the ability to satisfy the request. In some instances, expedited shipment is possible for products listed with greater than 5 day standard lead time. Please consult Customer Service for availability. When the order and shipment details are resolved the order may be placed and subject to our Expedited Shipment Guarantee. In the event that Dynapar fails to meet the guaranteed shipment commitment, the expedite fee will be waived. In the event that items are returned for refund, the fee will not be refunded. The Expedited Shipment Adder is calculated using the variables shown in the following table. EXPEDITED SHIPMENT RELATIVE TO ORDER ENTRY DATE Standard Lead Time Day of Order (Same Day) Order Received by 10:00AM CST Day 1 (Next Day) Day 2 (2nd Day) Day 3 Day 4 Order Received by 4:00PM CST Day 5 3 Days $150.00* $150.00* $75.00* $0 5 Days $150.00* $150.00* $75.00* $30.00 $30.00 $0 *Note: orders for cables only = $30.00 for Same Day or Next Day expedite. C2
Table of Contents Worldwide Brands: Worldwide Brands: Veeder-Root Dynapar Eagle Signal Encoder part numbers and prices are created by combining a Base Price with a combination of desired features and options. The tables on the following pages are used to configure the exact encoder to best fulfil your application requirements. Some features cannot be combined and are so indicated in the tables. Consult Customer Service regarding any items which are not listed. Absolute, Incremental & Motor Mount Encoder Table of Contents ACURO BRAND ABSOLUTE ENCODERS ABSOLUTE SERIES SERIES AD34 ABSOLUTE ENCODER... 4 SERIES AD35 ABSOLUTE ENCODER... 5 SERIES AD36 ABSOLUTE ENCODER... 6 SERIES AC36 ABSOLUTE ENCODER... 7 SERIES AC110 ABSOLUTE ENCODER... 8 SERIES AR62/AR63 ABSOLUTE ENCODER... 9 SERIES AX70/AX71 ABSOLUTE ENCODER... 10 SERIES AI25 DEVICENET INTERFACE ABSOLUTE ENCODER... 11 SERIES AI25 PROFIBUS ABSOLUTE ENCODER... 12 SERIES AI25 INTERBUS ABSOLUTE ENCODER... 13 SERIES AI25 SSI ABSOLUTE ENCODER... 14 SERIES AI25 BISS ABSOLUTE ENCODER... 15 SERIES AI25 PARALLEL ABSOLUTE ENCODER... 16 SERIES AD25 DRIVE ABSOLUTE ENCODER... 17 DYNAPAR BRAND INCREMENTAL ENCODERS COMMERCIAL - LIGHT DUTY SERIES E12 SIZE 12, LIGHT DUTY ENCLOSED ENCODERS... 18 SERIES E14 SIZE 14, LIGHT DUTY ENCLOSED ENCODERS... 18 SERIES E23 SIZE 23 COMPACT ENCLOSED ENCODERS... 19 SERIES EC23 SIZE 23 COMPACT ENCLOSED ENCODERS... 20 SERIES PC9 SHORT DEPTH PANELCODER... 20 INDUSTRIAL - DUTY SERIES 22 NEXGEN QUBE ENCODERS... 21 SERIES H20 SIZE 20 ENCODERS... 22 SERIES H42 SIZE 25 ECONOMICAL ENCODERS... 23 SERIES H58 58MM DIA ENCODERS... 23 SERIES HA25 SIZE 25 ENCODERS... 24 SERIES HC25 SIZE 25 ENCODERS... 25 SERIES HR25 SIZE 25 ENCODERS... 26 SERIES HA725 HIGH RESOLUTION ENCODERS... 27 SERIES 60 ROTOPULSER ENCODERS... 29 SERIES 60P ROTOPULSER ENCODERS... 30 DYNAPAR BRAND MODULAR ENCODERS & ACCESSORIES M602/832 ROTARY MODULES... 104 CERTIFICATION & ADDERS FOR ROTARY ENCODERS... 104 AB, ABZ LINEAR ENCODERS... 105 SCALES SCALES FOR LINEAR ENCODERS... 105 1
Table of Contents Encoder part numbers and prices are created by combining a Base Price with a combination of desired features and options. The tables on the following pages are used to configure the exact encoder to best fulfil your application requirements. Some features cannot be combined and are so indicated in the tables. Consult Customer Service regarding any items which are not listed. Absolute, Incremental & Motor Mount Encoder Table of Contents DYNAPAR BRAND INCREMENTAL ENCODERS (CONTINUED) MOTOR MOUNT - COMMERCIAL - LIGHT DUTY SERIES E9 0.9" MINIATURE ENCODERS... 31 SERIES E14HS SIZE 14 HUB SHAFT ENCODERS... 32 SERIES E14IC SIZE 14 INTEGRAL COUPLING ENCODERS... 33 SERIES M9 0.9" MINIATURE ENCODERS... 34 SERIES M14 1.5" INCREMENTAL MODULAR MINIATURE ENCODERS... 35 SERIES M15 SIZE 15 COMMUTATING MODULAR ENCODERS... 36 SERIES M53 SIZE 20 COMMUTATING MODULAR ENCODERS... 37 SERIES F10 SIZE 10 COMMUTATING ENCODERS... 38 SERIES F14 SIZE 14 COMMUTATING ENCODERS... 39 SERIES F15 SIZE 15 COMMUTATING ENCODERS... 40 SERIES F18 SIZE 18 COMMUTATING ENCODERS... 41 SERIES F21 SIZE 21 COMMUTATING ENCODERS... 42 MOTOR MOUNT - INDUSTRIAL DUTY SERIES H20HS SIZE 20 ENCODER W/HUB SHAFT... 43 SERIES HS20 SEALED HOLLOWSHAFT ENCODERS... 44 SERIES HS35R SEALED HOLLOWSHAFT ENCODERS... 45 SERIES HA26/526 SIZE 25 ENCODERS... 46 SERIES HR26/526 SIZE 25 ENCODERS... 47 SERIES HC26/526 SIZE 25 ENCODERS... 48 SERIES R45 MOTOR MOUNT RING ROTOPULSER, FOR NEMA 4-1/2 C-FACE MOTORS... 49 EXPLOSION PROOF - HEAVY DUTY SERIES X25 EXPLOSION PROOF ENCODER... 45 DYNAPAR BRAND SPARE PARTS & ACCESSORIES SERIES 53Z, 53ZK PICKUPS & SENSORS... 50-53 SHAFT COUPLINGS... 50-53 MEASURING WHEELS... 50-53 CABLES & CONNECTORS... 50-53 BRACKETS & ADAPTERS... 50-53 FEEDBACK ACCESSORY AND CONVERTERS... 50-53 2
Table of Contents Worldwide Brands: Worldwide Brands: Veeder-Root Dynapar Eagle Signal Encoder part numbers and prices are created by combining a Base Price with a combination of desired features and options. The tables on the following pages are used to configure the exact encoder to best fulfil your application requirements. Some features cannot be combined and are so indicated in the tables. Consult Customer Service regarding any items which are not listed. Heavy Duty Incremental Encoders & Pulse Tachs Table of Contents NORTHSTAR BRAND HEAVY-DUTY MAGNETO-RESISTIVE & OPTICAL ENCODERS HEAVY-DUTY SERIES H56 ROTOPULSER HEAVY DUTY ENCODERS...28 SERIES HS56 SLIM TACH ENCODERS, SINGLE OUTPUT...56 SERIES HS56 SLIM TACH ENCODERS, DUAL OUTPUT... 57 SERIES HS60 SERIES 60 HOLLOWSHAFT ENCODER... 58 SERIES HD20 HEAVY DUTY ENCODER...59 SERIES HD25 HEAVY DUTY ENCODER...61 SERIES HD35R HEAVY-DUTY, IEC FLANGE ENCODERS...68 SERIES DWD38 DRAW WORKS ENCODER... 69 SERIES HSD25 HEAVY-DUTY, HUB SHAFT ENCODERS... 63 SERIES HSD35 HEAVY-DUTY, HOLLOWSHAFT ENCODERS...54 SERIES HSD37 HEAVY-DUTY, HOLLOWSHAFT ENCODERS...65 SERIES HSD38 HEAVY-DUTY, HOLLOWSHAFT ENCODERS...69 SERIES HSD44 HEAVY DUTY HOLLOWSHAFT ENCODER... 71 SERIES ST67 SLIM TACH ENCODERS, SINGLE OUTPUT...73 SERIES ST67 SLIM TACH ENCODERS, DUAL OUTPUT... 74 SERIES RL67 SLIM TACH ENCODERS...75 SERIES SL1250 SLIM TACH ENCODERS, SINGLE OUTPUT...76 SERIES SL1250 SLIM TACH ENCODERS, DUAL OUTPUT... 77 SERIES ST56 SLIM TACH ENCODERS, SINGLE OUTPUT...78 SERIES ST56 SLIM TACH ENCODERS, DUAL OUTPUT... 79 SERIES SL56 SLIM TACH ENCODERS, SINGLE OUTPUT...80 SERIES SL56 SLIM TACH ENCODERS, DUAL OUTPUT... 81 SERIES ST85 SLIM TACH ENCODERS, SINGLE OUTPUT...82 SERIES ST85 SLIM TACH ENCODERS, DUAL OUTPUT... 83 SERIES SL85 SLIM TACH ENCODERS, SINGLE OUTPUT...84 SERIES SL85 SLIM TACH ENCODERS, DUAL OUTPUT... 85 MILL-DUTY SERIES 1250 NEXGEN RIM TACH... 86 SERIES 1250 RIM TACH... 87 SERIES 6200 NEXGEN RIM TACH... 98 SERIES 6200 RIM TACH... 89 SERIES 8500 NEXGEN RIM TACH... 90 SERIES 8500 RIM TACH... 91 SERIES HS85 RIM TACH... 92 HAZARDOUS/HARSH ENVIRONMENT DUTY SERIES EN42 HAZARDOUS DUTY ENCODER... 72 SERIES EN44 HAZARDOUS DUTY ENCODER...72 HAZARDOUS SERIES HD20 HAZARDOUS DUTY ENCODER...60 HAZARDOUS SERIES HD25 HAZARDOUS DUTY ENCODER...62 HAZARDOUS SERIES HSD35 HAZARDOUS-DUTY, HOLLOWSHAFT ENCODERS... 55 SERIES ISD25 HAZARDOUS DUTY ENCODER...64 SERIES ISD37 HAZARDOUS DUTY ENCODER...66 SERIES ISW38 HAZARDOUS DUTY ENCODER...70 SERIES X25 EXPLOSION PROOF ENCODER (DYNAPAR)... 49 SHAFT-LESS HEAVY DUTY HDP18 18MM THREADED BODY SHAFT-LESS ENCODER... 93 HDP30 30MM THREADED BODY SHAFT-LESS ENCODER... 94 HDN58 SHAFT-LESS ENCODER... 95 NORTHSTAR BRAND SPARE PARTS & ACCESSORIES SLIM TACH SPARE PARTS... 96-103 RIM TACH SPARE PARTS... 96-103 HD/HSD ACCESSORIES... 96-103 ACCESSORY INSTRUMENTS... 96-103 3
brand Series AD34 DC =HI; RC = N Lead Time (Days) = 20 Encoder Catalog Code 1: Model Code 2: Resolution Code 3: Voltage Code 4: Mounting Code 5: Protection Code 6: Shaft Size Code 7: Interface Code 8: Connection AD34 0 N Acuro Series AD34 Absolute Encoder 0012 0013 0014 0017 Available if Code 7 = BI or BC A 5 VDC E 7-30VDC U Standard Spring Tether F Inverse Tether 0 IP40 N 6mm Notched Shaft BI BC SB SC SG BiSS BiSS +1Vp-p SSI-Binary SSI Gray+1Vp-p SSI-Gray 0 12 Pole pinheader B.5m Radial cable 0019 AD34 Base Price $314.00 0012 0013 add $111.00* 0014 add $167.00* 0017 add $332.00* 0019 add $555.00 *0012 thru 0017 is when Code 7= BI or BC) A E add $10.00 U F 0 N BI BC SB add $56.00 SC add $56.00 SG add $56.00 0 B add $5.00 4
Worldwide Brands: Series AD35 Veeder-Root brand Dynapar Eagle Signal DC = HI; RC = N Lead Time (Days) = 20 Encoder Catalog Code 2: Resolution Code 3: Voltage Code 4: Flange/Protection/Shaft Code 5: Interface Code 6: Connection AD35. AD35 ACURO Absolute Encoder 0012 12 Bit ST 0013 13 Bit ST 0014 14 Bit ST 0017 17 Bit ST 0019 19 Bit ST (BiSS) A E 5 VDC* 7-30 VDC * No Inverse polarity protection F O R F.OR Optional, Spring Tether, IP40, 8mm Hub Shaft BI BiSS-B BC BiSS-B (+Sin Cos 1Vpp) SG SSI Gray SC SSI Gray (+Sin Cos 1Vpp) BE BiSS-C BV BiSS-C (+Sin Cos 1Vpp) 0 PCB Connector, Axial,12 pole 2 PCB Connector, Radial,12 pole A PCB Connector, Axial,12 pole with Mating Connector and 0.5 m Cable B PCB Connector, Radial,12 pole with Mating Connector and 0.5 m Cable AD35 Base Price $343.00 0012 0013 add $111.00* 0014 add $167.00* 0017 add $332.00* 0019 add $555.00 A E add $10.00 BI BC SC add $56.00 SG add $56.00 BE BV 0 2 A add $5.00 B add $5.00 *0012 thru 0017 is when Code 5 = BI or BC) 5
brand Series AD36 DC = HI; RC = N Lead Time (Days) = 20 Encoder Catalog Code 2: Resolution Code 3: Voltage Code 4: Flange/Protection/Shaft Code 5: Output Code 6: Connection AD36. AD36 ACURO Absolute Encoder 0012 12 Bit ST 0013 13 Bit ST 0014 14 Bit ST 0017 17 Bit ST 0019 19 Bit ST (Biss) 1212 12 Bit MT+12 Bit ST 1213 12 Bit MT+13 Bit ST 1214 12 Bit MT+14 Bit ST 1217 12 Bit MT+17 Bit ST 1219 12 Bit MT+19 Bit ST (Biss) A E 5 VDC* 7-30 VDC * No Inverse polarity protection F.OC Optional, Spring Tether, IP40, 8mm Through Hollow Shaft F.OR Spring Tether, IP40, 8mm Hub Shaft BI BC SG SC BE BV BiSS-B BiSS-B (+SinCos 1Vpp) SSI Gray SSI Gray (+SinCos 1Vpp) BiSS-C BiSS-C (+SinCos 1Vpp) 0 PCB Connector, 12 pole A PCB connector, axial,12 pole with mating connector and 0.5 m cable B PCB Connector, Radial,12 pole with Mating Connector and 0.5 m Cable AD36 Base Price $420.00 0012 0013 add $111.00 0014 add $167.00 0017 add $332.00 0019 add $555.00 1212 add $332.00 1213 add $384.00 1214 add $398.00 1217 add $555.00 1219 add $776.00 A E add $10.00 BI BC SC add $56.00 SG add $56.00 BE BV 0 A add $5.00 B add $5.00 6
Worldwide Brands: Veeder-Root brand Dynapar Eagle Signal Series AC36 DC = HI RC = N Lead Time (Days) = 20 Encoder Catalog Code 1: Model AC36 ACURO Series AC36 Absolute Encoder Code 2: Resolution 0012 0013 0014 0017 Available if Code 7 = BI 0019 0022 Code 3: Supply Voltage A 5 VDC E 7-30 VDC Code 4: Mounting Code 5: Protection Class R Round Flange 4 IP 64 Code 6: Shaft Size 1 6mm Code 7: Interface BI BISS SB SSI Binary SC SSI Gray + sios 1Vpp SG SSI Gray A B E F Code 8: Connection Cable, axial, 1.5m, 12 pole Cable, radial, 1.5m, 12 pole Cable, axial, 1.5m, 6 pole Cable, radial, 1.5m, 6 pole 1212 1213 1214 1217 Available if Code 7 = BI 1219 1222 AC36 Base Price $406.00 0012 0013 add $107.00 0014 add $161.00 0017 add $321.00 0019 add $536.00 0022 add $750.00 1212 add $321.00 1213 add $385.00 1214 add $385.00 1217 add $536.00 1219 add $750.00 1222 add $964.00 A E R 4 1 BI SB SC add $56.00 SG add $56.00 A B E F 7
brand Series AC110 DC = HI RC = N Lead Time (Days) = CF Encoder Catalog Code 1: Model AC110 Code 2: Resolution Code 3: Supply Voltage Code 4: Spring Tether Code 5: Protection Class Code 6: Shaft Mounting Code7: Shaft Size Code 8: Interface Code 9: Connection Code 10: Cable Length ACURO Series AC110 Absolute Encoder 0011 0012 0013 0014 0017 0019 0022 A 5 VDC E 10-30 VDC 0 None B With Spring Tether 0 IP 40 1 IP 50 4 IP 64 K Keyway 4 x 1.2 H Clamping Ring 50 50mm SB SG BI SSI Binary SSI Gray BISS B Cable, radial, 1.5m B5 1.5m D0 3m F0 5m K0 10m AC110 Base Price $840.00 0011 add $0.00 0012 add $56.00 0013 add $111.00 0014 add $167.00 0017 add $378.00 0019 add $555.00 0022 add $776.00 A E 0 B add $51.00 0 1 4 add $38.00 K H add $56.00 50 SB SG BI B B5 D0 add $27.00 F0 add $45.00 K0 add $89.00 8
Worldwide Brands: Series AR62/AR63 Veeder-Root brand Dynapar Eagle Signal DC = HI; RC = N Lead Time (Days) = 30 Encoder Catalog Code 1: Model Code 2: Resolution Code 3: Voltage Code 4: Mounting Code 5: Protection Code 6: Shaft Size Code 7: Interface Code 8: Connection Code 9: Cable Length AR62 AR62 Aluminum AR63 Stainless 0012 12 bit single-turn 1212 12 bit single turn, 12 bit multi-turn 1312 12 bit single turn, 13 bit multi-turn 1612 12 bit single turn, 16 bit multi-turn Measuring Range in Degrees: G090 90 G180 180 G360 360 Other on Request Measuring Range in Revolutions: U004 4 revolutions U008 8 revolutions U016 16 revolutions Other on Request E 10-30VDC F is available only when Code 7 is A0, AV or A4 F 17-30VDC L Synchro, Clamping Q Square Flange 7 IP67 9 IP69k 2 10mm 2 is available only when Code 4 is L 6 3/8 6 is available only when Code 4 is Q Available only when Code 2 is 1212, 1312, 1612 SG SSI-Gray SB SSI-Binary OL CAN Open Available only when Code 2 is 0012, AV Analog, 0-10V A0 Analog, 0-20mA A4 Analog, 4-20mA B Radial Cable F Radial Cable for Maratime Available when Code 1 is AR62 and code 5 is 7 5 M12 radial connector, 5-pin 8 M12 radial connector, 8-pin Blank 1.5m D0 3m F0 5m K0 10m P0 15m U0 20m V0 25m W0 30m X0 40m Y0 50m Base Price AR62 $571.00 AR63 $1028.00 0012 1212 add $167 1312 add $167 1612 add $194 G090 - G360 add $212 U004 - U016 add $212 E F L Q Add $56.00 7 9 add $56.00 2 6 SB SG OL add $100.00 AV A0 A4 B, F 5. 8 (N/A with Stainless or IP69k) Blank D0 add $28.00 F0 add $28.00 K0 add $58.00 P0 add $83.00 U0 add $106.00 V0 add $128.00 W0 add $205.00 X0 add $305.00 Y0 add $411.00 9
brand Series AX70/AX71 DC = HI; RC = N Lead Time (Days) = 20 Encoder Catalog Code 1: Model Code 2: Resolution Code 3: Voltage Code 4: Mounting Code 5: Protection Class Code 6: Shaft Size Code 7: Interface Code 8: Connection Code 9: Cable Length AX70 Acuro Series AX70 and AX71 (Stainless) Harsh-Duty Absolute Encoder Single-Turn 0010 0012 0013 0014 0017 0022 Multi-Turn 1212 1213 1214 1217 A 5 VDC E 10-30VDC K Clamping Flange 4 IP64 7 IP67 2 10mm SB SSI-Binary SG SSI-Gray SP SSI-Programmable DP Profibus DP VD DeviceNet CL CAN-L2 OL CAN-Open A Axial Cable B Radial Cable F0 K0 P0 U0 V0 5m 10m 15m 20m 25m AX70 Single-Turn A K 4 2 SB A, B F0 Base Price $2235.00 AX71 Base Price $3085.00 0010 0012 add $83.00 0013 add $111.00 0014 add $294.00 0017 add $854.00 0022 add $1784.00 Multi-Turn E 7 add $134.00 SG SP add $272.00 DP add $272.00 VD add $272.00 CL add $272.00 OL add $272.00 K0 add $78.00 P0 add $144.00 U0 add $221.00 V0 add $294.00 1212 add $632.00 1213 add $660.00 1214 add $798.00 1217 add $1402.00 10
Worldwide Brands: Veeder-Root brand Dynapar Eagle Signal Series AI25 ACURO Absolute DC = DI RC = N DeviceNet Interface Lead Time (Days) = 20 Encoder Catalog Code 2: Bits Code 3 :Mounting Code 4: Shaft Size Code 5: Protocol Code 6: Electrical Code 7: Connector AI25 AI25 Size25 Acuro Absolute Encoder Single-Turn 0010 10 Bit 0012 12 Bit 0013 13 Bit 0014 14 Bit Multi-Turn 1212 12 Bit Multi- Turn, 12 Bit Single-Turn 1213 12 Bit Multi- Turn, 13 Bit Single-Turn 1214 12 Bit Multi- Turn, 14 Bit Single-Turn Available when Code 4 is 0 or A 0 Servo* Available when Code 4 is 2 or C 1 Clamping* Available when Code 4 is 1 or B 2 Square flange** Available when Code 4 is 3, 4, 5 or 6 3 Hubshaft w/ tether * 58mm Dia. ** 2.5" Square 63mm BC w/o shaft seal (IP64) 0 6 mm 1 3/8" 2 10 mm 3 3/8" Hub Shaft 4 12 mm Hubshaft 5 1/2" Hubshaft 6 10mm Hubshaft w/ shaft seal (IP67) A 6 mm B 3/8" C 10 mm 9 Devicenet 2 10-30 VDC F G L Bus Cover 1 M12, 5-Pole Connector Bus Cover 2 Strain Relief Exits and 1 M12, 5-Pole Connector (for Tico display). Internal T-coupler included Bus Cover 2 Strain Relief Exits. Internal T-coupler included AI25 Base Price $537.00 0010 0012 add $56.00 0013 add $111.00 0014 add $167.00 1212 add $332.00 1213 add $398.00 1214 add $489.00 0 1 2 3 add $28.00 0 1 2 3 4 5 6 A add $17.00 B add $17.00 C add $17.00 9 add $56.00 2 add $28.00 F add $28.00 G add $28.00 L add $28.00 11
brand Series AI25 ACURO Absolute DC = DI RC = N Profibus Interface Lead Time (Days) = 20 Encoder Catalog Code 2: Bits Code 3 :Mounting Code 4: Shaft Size Code 5: Protocol Code 6: Electrical Code 7: Connector AI25 AI25 Size25 Acuro Absolute Encoder Single-Turn 0010 10 Bit 0012 12 Bit 0013 13 Bit 0014 14 Bit Multi-Turn 1212 12 Bit Multi- Turn, 12 Bit Single-Turn 1213 12 Bit Multi- Turn, 13 Bit Single-Turn 1214 12 Bit Multi- Turn, 14 Bit Single-Turn Available when Code 4 is 0 or A 0 Servo* Available when Code 4 is 2 or C 1 Clamping* Available when Code 4 is 1 or B 2 Square flange** Available when Code 4 is 3, 4, 5 or 6 3 Hubshaft w/ tether * 58mm Dia. ** 2.5" Square 63mm BC w/o shaft seal (IP64) 0 6 mm 1 3/8" 2 10 mm 3 3/8" Hub Shaft 4 12 mm Hubshaft 5 1/2" Hubshaft 6 10mm Hubshaft w/ shaft seal (IP67) A 6 mm B 3/8" C 10 mm 6 Profibus 2 10-30 VDC E G H Bus Cover 3 Strain Relief Exits. Internal T-coupler included Bus Cover 2 Strain Relief Exits and 1 M12, 5-Pole Connector (for Tico display). Internal T-coupler included Bus Cover Double Conin. Internal T-coupler included AI25 Base Price $537.00 0010 0012 add $56.00 0013 add $111.00 0014 add $167.00 1212 add $332.00 1213 add $398.00 1214 add $489.00 0 1 2 3 add $28.00 0 1 2 3 4 5 6 A add $17.00 B add $17.00 C add $17.00 6 add $56.00 2 add $27.00 E add $28.00 G add $28.00 H add $28.00 12
Worldwide Brands: Veeder-Root brand Dynapar Eagle Signal Series AI25 ACURO Absolute DC = DI RC = N Interbus Interface Lead Time (Days) = 20 Encoder Catalog Code 2: Bits Code 3 :Mounting Code 4: Shaft Size Code 5: Protocol Code 6: Electrical Code 7: Connector AI25 AI25 Size25 Acuro Absolute Encoder Single-Turn 0010 10 Bit 0012 12 Bit Multi-Turn 1212 12 Bit Multi- Turn, 12 Bit Single-Turn Available when Code 4 is 0 or A 0 Servo* Available when Code 4 is 2 or C 1 Clamping* Available when Code 4 is 1 or B 2 Square flange** Available when Code 4 is 3, 4, 5 or 6 3 Hubshaft w/ tether * 58mm Dia. ** 2.5" Square 63mm BC w/o shaft seal (IP64) 0 6 mm 1 3/8" 2 10 mm 3 3/8" Hub Shaft 4 12 mm Hubshaft 5 1/2" Hubshaft 6 10mm Hubshaft w/ shaft seal (IP67) A 6 mm B 3/8" C 10 mm 5 Interbus K3 2 10-30 VDC E G H Bus Cover 3 Strain Relief Exits. Internal T-coupler included Bus Cover 2 Strain Relief Exits and 1 M12, 5-Pole Connector (for Tico display). Internal T-coupler included Double Conin. Internal T-coupler included AI25 Base Price $537.00 0010 0012 add $56.00 1212 add $332.00 0 1 2 3 add $28.00 0 1 2 3 4 5 6 5 add $111.00 2 add $27.00 E add $28.00 G add $28.00 H add $28.00 A add $17.00 B add $17.00 C add $17 13
brand Series AI25 ACURO Absolute DC = DI RC = N SSI Interface Lead Time (Days) = 20 Encoder Catalog Code 2: Bits Code 3 :Mounting Code 4: Shaft Size Code 5: Protocol Code 6: Electrical Code 7: Connector AI25 AI25 Size25 Acuro Absolute Encoder Single-Turn 0010 10 Bit 0012 12 Bit 0013 13 Bit 0014 14 Bit 0017 17 Bit Multi-Turn 1212 12 Bit Multi- Turn, 12 Bit Single-Turn 1213 12 Bit Multi- Turn, 13 Bit Single-Turn Available when Code 4 is 0 or A 0 Servo* Available when Code 4 is 2 or C 1 Clamping* Available when Code 4 is 1 or B 2 Square flange** Available when Code 4 is 3, 4, 5 or 6 3 Hubshaft w/ tether * 58mm Dia. ** 2.5" Square 63mm BC w/o shaft seal (IP64) 0 6 mm 1 3/8" 2 10 mm 3 3/8" Hub Shaft 4 12 mm Hubshaft 5 1/2" Hubshaft 6 10mm Hubshaft w/ shaft seal (IP67) A 6 mm B 3/8" C 10 mm 2 SSI Gray 3 SSI Binary 0 5 VDC 2 10-30 VDC 0 1.5m axial cable 1 1.5m radial cable 2 M23 Conin 12 pin axial CW 3 M23 Conin 12 pin radial CW C D M12, 8-pole connector axial M12, 8-pole connector radial AI25 Base Price $537.00 0010 0012 add $56.00 0013 add $111.00 0014 add $167.00 0017 add $378.00 1212 add $332.00 1213 add $398.00 0 1 2 3 add $28.00 0 1 2 3 4 5 6 A add $17.00 B add $17.00 C add $17.00 2 3 0 2 add $28.00 0 1 2 3 C D 14
Worldwide Brands: Veeder-Root brand Dynapar Eagle Signal Series AI25 ACURO Absolute DC = DI RC = N BiSS Interface Lead Time (Days) = 20 Encoder Catalog Code 2: Bits Code 3 :Mounting Code 4: Shaft Size Code 5: Protocol Code 6: Electrical Code 7: Connector AI25 AI25 Size25 Acuro Absolute Encoder Single-Turn 0010 10 Bit 0012 12 Bit 0013 13 Bit 0014 14 Bit 0017 17 Bit Multi-Turn 1212 12 Bit Multi- Turn, 12 Bit Single-Turn 1213 12 Bit Multi- Turn, 13 Bit Single-Turn 1214 12 Bit Multi- Turn, 14 Bit Single-Turn 1217 12 Bit Multi- Turn, 17 Bit Single-Turn Available when Code 4 is 0 or A 0 Servo* Available when Code 4 is 2 or C 1 Clamping* Available when Code 4 is 1 or B 2 Square flange** Available when Code 4 is 3, 4, 5 or 6 3 Hubshaft w/ tether * 58mm Dia. ** 2.5" Square 63mm BC w/o shaft seal (IP64) 0 6 mm 1 3/8" 2 10 mm 3 3/8" Hub Shaft 4 12 mm Hubshaft 5 1/2" Hubshaft 6 10mm Hubshaft w/ shaft seal (IP67) A 6 mm B 3/8" C 10 mm A BiSS 0 5 VDC 2 10-30 VDC 0 1.5m axial cable 1 1.5m radial cable 2 M23 Conin 12 pin axial CW 3 M23 Conin 12 pin radial CW C D M12, 8-pole connector axial M12, 8-pole connector radial AI25 Base Price $537.00 0010 0012 add $56.00 0013 add $111.00 0014 add $167.00 0017 add $378.00 1212 add $332.00 1213 add $398.00 1214 add $489.00 1217 add $753.00 0 1 2 3 add $28.00 0 1 2 3 4 5 6 A add $17.00 B add $17.00 C add $17.00 A 0 2 add $28.00 0 1 2 3 C D 15
brand Series AI25 ACURO Absolute DC = DI RC = N Parallel Interface AI25 Base Price $537.00 0010 0012 add $56.00 0013 add $111.00 0014 add $167.00 0360 0720 1212 add $332.00 0 1 2 3 add $28.00 0 1 2 3 4 5 6 A add $17.00 B add $17.00 C add $17.00 0 Single Turn 0 Multi-Turn add $388.00 1 Single Turn 1 Multi-Turn add $388.00 Lead Time (Days) = 20 Encoder Catalog Code 2: Bits Code 3 :Mounting Code 4: Shaft Size Code 5: Protocol Code 6: Electrical Code 7: Connector AI25 AI25 Size25 Acuro Absolute Encoder Single-Turn 0010 10 Bit 0012 12 Bit 0013 13 Bit 0014 14 Bit 0360 360 PPR (Gray excess) 0720 720 PPR (Gray excess) Available when Code 6 is 2 Multi-Turn 1212 12 Bit Multi- Turn, 12 Bit Single-Turn Available when Code 4 is 0 or A 0 Servo* Available when Code 4 is 2 or C 1 Clamping* Available when Code 4 is 1 or B 2 Square flange** Available when Code 4 is 3, 4, 5 or 6 3 Hubshaft w/tether * 58mm Dia. ** 2.5" Square 63mm BC w/o shaft seal (IP64) 0 6 mm 1 3/8" 2 10 mm 3 3/8" Hub Shaft 4 12 mm Hubshaft 5 1/2" Hubshaft 6 10 mm Hub Shaft w/ shaft seal (IP67) A 6 mm B 3/8" C 10 mm 0 Parallel Binary 1 Parallel Gray 0 5 VDC 2 10-30 VDC 0 2 add $28.00 0 1.5m axial cable 1 1.5m radial cable Available when Code 2 is 00XX, 0360 or 0720 6 M23 Conin 17 pin axial CW 7 M23 Conin 17 pin radial CW 8 17 pin Conin axial CCW 9 17 pin Conin radial Available when Code 2 is 00XX. Status LED and Preset Switch features not available with "J" J 17 pin MS axial Available when Code 2 is 00XX or 0720 K 19 pin Bayonet radial Available when Code 2 is 1212 A Cable 1.5m radial w/ 37 pin sub-d B Cable 1.5m axial w/37 pin sub-d 0 1 6 7 8 add $28.00 9 add $28.00 A add $28.00 B add $28.00 J K 16
Worldwide Brands: Veeder-Root brand Dynapar Eagle Signal Series AD25 Drive ACURO Absolute DC = DI RC = N BiSS/SSI Interface Lead Time (Days) = 20 Encoder Catalog Code 2: Bits Code 3 :Mounting Code 4: Shaft Size Code 5: Protocol Code 6: Electrical Code 7: Connector AD25 AD25 Size25 Acuro Absolute Encoder Single-Turn 0013 13 Bit 0022 22 Bit Multi-Turn 1213 12 Bit Multi- Turn, 13 Bit Single-Turn 1222 12 Bit Multi- Turn, 22 Bit Single-Turn 4 Spring Tether Y 10mm Shaft (10:1 Taper) Z 10mm Hub Shaft (10:1 Taper) Available when Code 2 is 0022 or 1222 A BiSS Available when Code 2 is 0013 or 1213 F SSI-Gray Code, + 1Vpp 0 5 VDC M Drive cable, 1 foot (30 cm) AD25 Base Price $478.00 0013 0022 add $443.00 1213 add $398.00 1222 add $975.00 4 Y Z A F 0 M 17
Dynapar brand Series E12 DC = DI; RC = N Lead Time (Days) = 3 Encoder Catalog E12 Code 2: Pulses/Rev Code 3: Mechanical Code 4: Output Code 5: Electrical Code 6: Termination E12 Size 12, Light Duty Enclosed 0250 0256 0360 0500 0600 1000 0 Sealed Bearing 1 Shielded Bearing 0 Unidirectional 2 Bidirectional, no Index 3 Bidirectional, with Index 0 5 VDC 1 12 VDC 2 15 VDC 0 18" Cable 1 3' Cable 2 6' Cable 3 10' Cable 4 15' Cable E12 Base Price $499.00 0250 thru 1000 add $18.00 0 add $5.00 1 0 2 add $18.00 3 add $35.00 0 1 2 0 1 add $6.00 2 add $15.00 3 add $23.00 4 add $35.00 Series E14 DC = DI; RC = N Lead Time (Days) = 3 Encoder Catalog E14 Code 2: Pulses/Rev Code 3: Mounting Code 4: Mechanical Code 5: Output Code 6: Electrical Code 7: Termination E14 Size 14, Light Duty Enclosed 0100 0200 0250 0256 0300 0400 0500 0600 0720 0750 0900 1000 1250 1500 2000 2048 2500 2540 0 Size E14 1 Size E20 Servo 2 Size E20 Flange Available when Code 4 is 2 3 Size EC80 Flange 0 1/4" Shaft, Sealed Bearing 1 1/8" Shaft, Sealed Bearing 2 1/4" Shaft, Shielded Bearing 3 1/8" Shaft, Shielded Bearing 0 Single Ended, Unidirectional 2 Single Ended, Bidirectional, no Index 3 Single Ended, Bidirectional, with Index 4 Differential, Unidirectional 6 Differential, Bidirectional, no Index 7 Differential, Bidirectional, with Index 0 5 VDC 1 12 VDC 2 15 VDC 0 18" Cable 1 3' Cable 2 6' Cable 3 10' Cable 4 15' Cable E14 Base Price $350.00 0100 thru 1000 thru add $17.00 2048 Above 2048 add $50.00 0 1 add $28.00 2 add $56.00 3 add $56.00 0 add $5.00 1 2 add $10.00 3 add $17.00 0 2 add $10.00 3 add $23.00 4 add $17.00 6 add $287.00 7 add $38.00 0 1 2 0 1 add $6.00 2 add $12.00 3 add $23.00 4 add $33.00 18
Dynapar brand Worldwide Brands: Series E23 E23 E23 Size 23 Enclosed 0001 0005 0010 0012 0050 0060 0100 0120 0150 0180 0200 0240 0250 0256 Code 2: Pulses/Rev 0300 0344 0360 0400 0500 0512 0600 0625 0635 0720 0800 0900 1000 Veeder-Root Dynapar Eagle Signal 1200 1250 1270 1500 1600 1800 1968 2000 2048 2400 2500 2540 For Resolutions above 2540, see Series EC23 DC = DI; RC = N Code 3: Mechanical 0 1/4" Shaft, Shielded Bearings 1 1/4" Shaft, Sealed Bearings Lead Time (Days) = 3 Encoder Catalog Code 4: Output 4 Single Ended, with Index, Format C 5 Differential, with Index, Format C 6 Single Ended, with Index, Format D 7 Differential, with Index, Format D 8 Single Ended, no Index, Format C 9 Differential, no Index, Format C Code 5: Electrical 0 5-26V in; 5-26V Open Collector w/2.2kω Pullup out 1 5-26V in; 5-26V Open Collector out 2 5-26V in; 5V TTL Totem Pole out 3 5-26V in; 5V Line Driver out (7272) 4 5-26V in; 5-26V Line Driver out (7272) 5 5-26V in, 5V Differential Line Driver out (4469) 6 5-15V in, 5-15V Differential Line Driver out (4469) Code 6: Termination 0 18" Cable 1 3' Cable 2 6' Cable 3 10' Cable 4 15' Cable 8 Screw Terminals E23 Base Price $415.00 0001 thru 1000 thru add $17.00 2540 0 1 add $10.00 4 add $34.00 5 add $34.00 6 add $34.00 7 add $34.00 8 9 0 1 add $10.00 2 add $10.00 3 add $10.00 4 5 add $29.00 6 add $29.00 0 1 add $6.00 2 add $12.00 3 add $24.00 4 add $34.00 8 19
Dynapar brand Series EC23 EC23 EC23 Size 23 Enclosed Code 2: Pulses/Rev 3000 3600 4096 5000 3,000 3,600 4,096 5,000 For Resolutions below 3000, see Series E23 DC = DI; RC = N Code 3: Mechanical 0 1/4" Shaft, Shielded Bearings, 2.31 Dia. Servo Mount w/ 4-Hole Face Mount 1 1/4" Shaft, Sealed Bearings, 2.31 Dia. Servo Mount w/ 4-Hole Face Mount Lead Time (Days) = 5 Encoder Catalog Code 4: Output 4 Single Ended, with Index, Format C 5 Differential, with Index, Format C 6 Single Ended, with Index, Format D 7 Differential, with Index, Format D 8 Single Ended, No Index, Format C 9 Differential, No Index, Format C Code 5: Electrical 0 5-26V in, 5-26V Open Collector w/2.2kω Pullups out 1 5-26V in, 5-26V Open Collector out 2 5-26V in; 5V out, Push- Pull out 3 5-26V in; 5V Line Driver out 4 5-26V in, 5-26V Line Driver out Code 6: Termination 0 18 Cable, Side Exit 1 3' Cable, Side Exit 2 6' Cable, Side Exit 3 10' Cable, Side Exit 4 15' Cable, Side Exit 8 Screw Terminals EC23 $616.00 0 1 add $10.00 4 add $33.00 5 add $33.00 6 add $33.00 7 add $33.00 8 9 0 1 add $10.00 2 add $10.00 3 add $10.00 4 0 1 add $6.00 2 add $12.00 3 add $23.00 4 add $33.00 8 Series PC9 DC = DM; RC = N Lead Time (Days) = 15 Encoder Catalog Code 3: Output Description Code 4: Mounting Description PC9S PC9 0.9" Dia. short depth Panelcoder 0.9" Dia. Panelcoder 0100 0144 0200 0256 0300 0360 0500 0512 Available when Code 1 is PC9 01 Differential ABZ 02 Single ended ABZ, Up Down Direction Available when Code 1 is PC9S 03 Single ended AB 04 Single ended ABZ M N 1/4" Shaft, sleeve bearing 1/8" shaft, ball bearings PC9S PC9 Base Price $107.00 Base Price $124.00 0100 thru 0360 0500 thru add 0512 $2.00 All Standard Outputs M N add $7.00 PC9 accessory connector w/12" ribbon cable, part no. CA0040012 Price $22.00 PC9S accessory connector w/12" wires, part no. CA0050012 Price $17.00 20
Dynapar brand Worldwide Brands: Veeder-Root Dynapar Eagle Signal NexGen Qube Code 2: Pulses/Rev DC = DI RC = N Code 3: Mechanical Lead Time (Days) = 3 Encoder Catalog Code 4: Output Code 5: Electrical Code 6: Termination 22 Qube Encoder, Bidirectional 22M Metric Qube Encoder, Bidirectional 22 Base Price $260.00 22M Base Price $273.00 0001 0010 0012 0024 0025 0035 0040 0050 0060 0100 0120 0125 0150 0192 0200 0240 0250 0256 0001 thru 0300 0360 0500 0512 0600 0625 0720 0800 1000 1200 1250 1270 1440 2500 2540 2600 3600 1200 thru add $28.00 3600 available only when Code 1 is 22 0 3/8" Double ended shaft 1 3/8" Single ended shaft 2 1/4" Double ended shaft 3 1/4" Single ended shaft A Same as "0" with shaft seal B Same as "1" with shaft seal C Same as "2" with shaft seal D Same as "3" with shaft seal available only when Code 1 is 22M 4 6mm Double ended shaft 5 6mm Single ended shaft E Same as "4" with F shaft seal Same as "5" with shaft seal 0 Single Ended, Table 1 2 Differential, Table 2 available only when Code 1 is 22 or 22M: 1 Single Ended, with Index, Table 3 available only when Code 6 is 1 to 5 or A to E: 3 Differential, with Index, Table 5 available only when code 6 is 0: 4 Differential, Table 4 available only when Code 6 is 6: 5 5 pin M12 connector, single ended, no index, Table 6 6 5 pin M12 connector, single ended, with index, Table 6 7 8 pin M12 connector, single ended, no index, Table 7 8 8 pin M12 connector, single ended, with index, Table 7 9 8 pin M12 connector, differential, no index, Table 8 A 8 pin M12 connector, differential, with index, Table 8 0 add $10.00 0 1 add $5.00 1 add $66.00 2 add $5.00 3 2 add $17.00 4 add $5.00 3 add $94.00 5 4 add $17.00 A Add $28.00 5, 6 add $28.00 B Add $23.00 C Add $23.00 7, 8, 9 add $38.00 D Add $17.00 A add $38.00 E Add $23.00 F Add $17.00 available when Code4 = 0, 1, 5, 6, 7 or 8: 0 5-26 VDC in, 5-26 VDC Open Collector w/2.2k pull-ups out 1 5-26 VDC in, 5-26 VDC Open Collector w/o pull-up out 2 5-26 VDC in, 5V Totem Pole out available when Code4 = 2, 3, 4, 9 or A: 3 5-26 VDC in, 5V Line Driver out 4 5-26 VDC in, 5-26 VDC CMOS Line Driver 0 1 2 3 4 0 MS Connector available when Code 3 is 0, 1, 2, 3, 4 or 5 1 18" Cable 2 3' Cable 3 6' Cable 4 10' Cable 5 15' Cable available when Code 4 is 5, 6, 7, 8, 9 or A 6 M12 Connector available when Code 3 is A,B,C,D,E or F A 18" Sealed Cable B 3' Sealed Cable C 6' Sealed Cable D 10' Sealed Cable E 15' Sealed Cable 0 1 add $3.00 2 add $6.00 3 add $12.00 4 add $23.00 5 add $33.00 6 A Add $14.00 B Add $19.00 C Add $25.00 D Add $33.00 E Add $45.00 111328-0001 Qube Pivot Mount bracket $127.00 21
Dynapar brand Series H20 DC = DI; RC = N Lead Time (Days) = 3 Encoder Catalog H2 Code 3: Housing Code 4: Shaft Code 5: Face Mount Code 6:Pilot, Seal Code 7: Electrical Code 8: Termination Code 9: Options 1 Unidirectional 2 Bidirectional 3 Bidirectional with Index 0001 0005 0010 0012 0050 0060 0100 0120 0200 0240 0250 0256 0300 0360 0400 0500 0512 0600 0800 0900 1000 1200 1250 1270 1500 1600 1800 1968 2000 2048 2400 2500 2540 0 Servo Mount 1 Flange Mount 0 3/8" Dia. Shaft with flat 1 1/4" Dia. Shaft, no flat 4 10mm Dia. Shaft, no flat 0 no face mount available when Code 3 is 0: 1 (4) #10-32 @ 1.63" BC 2 (3) #4-40 @ 1.50" BC 3 (3) #6-32 @ 1.75" BC available when Code 3 is 1: 4 (4) #6-32 @ 2.00" BC 0 1.18" Dia. Female Pilot 1 1.25" Dia. Male Pilot 2 1.25" Dia. Male Pilot with Shaft Seal 3 0.69" Dia. Male Pilot 4 0.69" Dia. Male Pilot with Shaft Seal 0 5-26V in, 5-26V Open Collector out 1 5-26V in, 5-26V Open Collector out with 2.2 kω Pullups 2 5-26V in, 5-26V Push-Pull out A Same as "0" with extend. temp range B Same as "1" with extend. temp range C Same as "2" with extend. temp range available when: Code 1 is 1 or 2 and Code 8 is 2 through M; or Code 1 is 3 and Code 8 is 4 thru M, Q or R: 3 5-26V in, 5-26V Differential Line Driver out (7272) 4 5-26V in, 5V Differential Line Driver out (7272) 5 5-26V in, 5 V Differential Line Driver out (4469) 6 5-15V in, 5-15V Differential Line Driver out (4469) D Same as "3" with extend. temp range E Same as "4" with extend. temp range 0 6 Pin Conn, End Mount 1 6 Pin Conn, Side Mount 2 7 Pin Conn, End Mount 3 7 Pin Conn, Side Mount 4 10 Pin Conn, End Mount 5 10 Pin Conn, Side Mount 6 18" Cable, End Exit 7 18" Cable, Side Exit 8 36" Cable, End Exit 9 36" Cable, Side Exit A 10' Cable, End Exit B 10' Cable, Side Exit J 25' Cable, End Exit K 25' Cable, Side Exit N P Q R 5 Pin M12 Connector, End Mount 5 Pin M12 Connector, Side Mount 8 Pin M12 Connector, End Mount 8 Pin M12 Connector, Side Mount available when Code 6 is 2 or 4: C 18" Sealed Cbl, End Exit D 18" Sealed Cbl, Side Exit E 36" Sealed Cbl, End Exit F 36" Sealed Cbl, Side Exit G 10' Sealed Cbl, End Exit H 10' Sealed Cbl, Side Exit L 25' Sealed Cbl, End Exit available when Code 8 is 0 to 5: PS LED Output Indicator M 25' Sealed Cbl, Side Exit H21 Base Price $372.00 H22 Base Price $372.00 H23 Base Price $384.00 0001 thru 0600 0601 add thru $38.00 1200 add thru $78.00 2540 0 1 0 1 4 0 1 add $3.00 2 add $3.00 3 add $3.00 4 add $3.00 0 1 2 add $3.00 3 4 add $3.00 0 1 2 add $10.00 3 add $10.00 4 add $10.00 5 add $28.00 6 add $28.00 A add $33.00 B add $33.00 0, 1 2, 3 4, 5 add $5.00 6, 7 8, 9 add $3.00 A, B add $17.00 C, D add $3.00 E, F add $6.00 G, H add $21.00 PS $28.00 C add $45.00 J, K, add $28.00 D add $45.00 L, M, N, P add $28.00 E add $45.00 Q, R add $38.00 22
Dynapar brand Worldwide Brands: Series H58 H58 H58 Bidirectional with Index (Channels A, B and Z) H58 Base Price $388.00 Series H42 H42 0001 0010 0012 0050 0060 0086 0100 0120 0125 0200 0240 0250 0300 0360 0400 0500 0512 0001 thru 0600 0600 0800 1000 1200 1250 1270 1500 1600 1800 1968 2000 2048 2400 2500 2540 0601 add thru $39.00 1200 add thru $80.00 2540 H42 Size 25, Economical 0001 0012 0060 0100 H42 Base Price $655.00 0001 thru 0600 Code 3: Pilot, Face Veeder-Root Dynapar Eagle Signal 0 (3) M4 @ 42mm BC, no Pilot 1 (3) M3 @ 48mm BC, 36mm Dia. Pilot 0 1 DC = DI RC = R Lead Time (Days) = 3 Encoder Catalog Code 2: Pulses/Rev 0120 0500 0600 DC = DI; RC = N Code 4: Shaft 0 6mm Dia. Shaft 1 10mm Dia. Shaft 0 1 Code 5: Shaft Seal Lead Time (Days) = 3 Encoder Catalog Code 6: Electrical 0 no Shaft Seal 0 5-26V in, 5-26V Push-Pull out 1 Shaft Seal available when Code 7 is 2 thru B, E or F: 1 5-26V in, 5-26V Differential Line Driver out (7272) 2 5-26V in, 5V Differential Line Driver out (7272) 3 5-26V in, 5V Differential Line Driver out (4469) 4 5-15V in, 5-15V Differential Line Driver out (4469) A B C Same as "0" with extend. temp range Same as "1" with extend. temp range Same as "2" with extend. temp range 0 0 1 add 1 add $3.00 $11.00 2 add $3.00 3 add $11.00 4 add $11.00 A add $34.00 B add $37.00 C add $37.00 Code 7: Termination 0 7 Pin Conn, End Mount 1 7 Pin Conn, Side Mount 2 10 Pin Conn, End Mount 3 10 Pin Conn, Side Mount 4 12 Pin CCW Conn, End Mount 5 12 Pin CCW Conn, Side Mount 6 12 Pin CW Conn, End Mount 7 12 Pin CW Conn, Side Mount C 5 pin M12 Conn, End Mount D 5 pin M12 Conn, Side Mount E 8 pin M12 Conn, End Mount F 8 pin M12 Conn, Side Mount available when Code 5 is 1: 8 1m Sealed Cbl, End Exit 9 1m Sealed Cbl, Side Exit A 3m Sealed Cbl, End Exit B 3m Sealed Cbl, Side Exit 0, 1 2, 3 add $5.00 4 7 add $5.00 8, 9 add $6.00 A, B add $21.00 C, D add $28.00 E, F add $39.00 Code 8: Connector 0 no Mating Connector 1 7 Pin Mating Connector 2 10 Pin Mating Connector 3 12 Pin CCW Mating Connector 4 12 Pin CW Mating Connector 0 1 add $21.00 2 add $25.00 3 add $25.00 4 add $25.00 23
Dynapar brand Series HA25 HA 25 HA525 Size 25 Enclosed, Shielded Bearings, Glass Disk HA625 Size 25 Enclosed, with Shaft Seal, Glass Disk DC = DI; RC = N Code 3: Mechanical 0001 0005 0010 0012 0050 0060 0100 0120 0150 0180 0200 0240 0250 0256 0300 0360 0400 0500 0512 0600 0625 0635 0720 0800 0900 1000 1200 1250 1270 1500 1600 1800 1968 2000 2048 2400 2500 2540 0 Flange Mount, 3/8" Shaft 1 2.50" Servo Mount/ 4 Hole, 2.00" BC Face Mount, 3/8" Shaft 2 Flange Mount, 1/4" Shaft 3 2.50" Servo Mount/ 4 Hole 2.00" BC Face Mount, 1/4" Shaft 4 2.50" Servo Mount/ 3 Hole, 2.00" BC Face Mount, 3/8" Shaft 5 2.50" Servo Mount/ 3 Hole, 2.00" BC Face Mount, 1/4" Shaft 6 2.50" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 3/8" Shaft 7 2.50" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 1/4" Shaft 8 2.62" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 3/8" Shaft 9 2.62" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 1/4" Shaft Lead Time (Days) = 3 Encoder Catalog Code 4: Output Code 5: Electrical Code 6: Termination Code 7: Options 7 Pin Connector or Cable 0 Single Ended, no Index, Format A, Table 2 1 Single Ended, with Index, Format A, Table 2 4 Single Ended, with Index, Format B, Table 2 6 Differential, no Index, Format C, Table 3 A Single Ended, with Index, Format C, Table 2 C Single Ended, no Index, Format C, Table 2 G Single Ended, with Index, Format D, Table 2 10 Pin Connector or Cable 2 Differential, no Index, Format A, Table 1 3 Differential, with Index, Format A, Table 1 5 Differential, with Index, Format B, Table 1 B Differential, with Index Format C, Table 1 D Differential, no Index, Format C, Table 1 available when Code 6 is 0 or 1 5 Pin M12 Connector H Single ended, no index, Format A, Table 4 J Single ended, with index, Format A, Table 4 K Single ended, with index, Format B, Table 4 L Single ended, with index, Format C, Table 4 M Single ended, no index, Format C, Table 4 N Single ended, with index, Format D, Table 4 available when Code 6 is 0 or 1 8 Pin M12 Connector P Single ended, no index, Format A, Table 5 Q Single ended, with index, Format A, Table 5 R Single ended, with index, Format B, Table 5 S Single ended, with index, Format C, Table 5 T Single ended, no index, Format C, Table 5 U Single ended, with index, Format D, Table 5 V Differential, no index, Format A, Table 6 W Differential, with index, Format A, Table 6 X Differential, with index, Format B, Table 6 Y Differential, with index, Format C, Table 6 Z Differential, no index, Format C, Table 6 0 5-26V in; 5-26V Open Collector with 2.2kΩ Pullup out 1 5-26V in; 5-26V Open Collector out 2 5-26V in; 5V Totem Pole out 3 5-26V in; 5V Line Driver out (7272) 4 5-26V in; 5-26V Line Driver out (7272) 5 5-26V in, 5V Differential Line Driver out (4469) 6 5-15V in, 5-15V Differential Line Driver out (4469) A Same as "0" with extend. temp range B Same as "1" with extend. temp range C Same as "2" with extend. temp range D Same as "3" with extend. temp range E Same as "4" with extend. temp range 0 End Mount Connector 1 Side Mount Connector available when Code 4 is 0 thru G 2 18" Cable, Side 3 3' Cable, Side 4 6' Cable, Side 5 10' Cable, Side 6 15' Cable, Side J 18" Cable, End K 3' Cable, End L 6' Cable, End M 10' Cable, End N 15' Cable, End available when Code 1 is HA625 and Code 4 is 0 thru G A 18" Watertight, Side B 3' Watertight, Side C 6' Watertight, Side D 10' Watertight, Side F 15' Watertight, Side P 18" Watertight, End Q 3' Watertight, End R 6' Watertight, End S 10' Watertight, End T 15' Watertight, End available when Code 4 is 0 thru G, and Code 6 is 0 or 1: PS LED Output Indicator HA525 Base Price $470.00 HA625 Base Price $498.00 0001 thru 1000 thru 2540 add $17.00 0 1 to 5 add $10.00 6 7 to 9 add $10.00 0, 2, 6 1, 3, 4, 5 add $36.00 A, B, G add $36.00 C, D H to N add $28.00 P to Z add $38.00 0 1 to 4 add $10.00 5, 6 add $28.00 A add $33.00 B to E add $45.00 0 1 add $10.00 2, A, J, P add $3.00 3, B, K, Q add $6.00 4, C, L, R add $12.00 5, D, M, S add $23.00 6, F, N, T add $33.00 PS $28.00 24
Dynapar brand Worldwide Brands: Veeder-Root Dynapar Eagle Signal Series HC25 DC = DI RC = N HC 25 HC525 Size 25 Enclosed, Shielded Bearings HC625 Size 25 Enclosed, with Shaft Seal HC525 Base Price $657.00 HC625 Base Price $684.00 3000 3600 4096 5000 Code 3: Mechanical 0 Flange Mount, 3/8" Shaft 1 2.50" Servo Mount/ 4 Hole, 2.00" BC Face Mount, 3/8" Shaft 2 Flange Mount, 1/4" Shaft 3 2.50" Servo Mount/ 4 Hole 2.00" BC Face Mount, 1/4" Shaft 4 2.50" Servo Mount/ 3 Hole, 2.00" BC Face Mount, 3/8" Shaft 5 2.50" Servo Mount/ 3 Hole, 2.00" BC Face Mount, 1/4" Shaft 6 2.50" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 3/8" Shaft 7 2.50" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 1/4" Shaft 8 2.62" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 3/8" Shaft 9 2.62" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 1/4" Shaft 0 1 to 5 add $10.00 6 7 to 9 add $10.00 Lead Time (Days) = 5 Encoder Catalog Code 4: Output 7 Pin Connector or Cable 0 Single Ended, no Index, Format A, Table 2 1 Single Ended, with Index, Format A, Table 2 4 Single Ended, with Index, Format B, Table 2 6 Differential, no Index, Format C, Table 3 A Single Ended, with Index, Format C, Table 2 C Single Ended, no Index, Format C, Table 2 G Single Ended, with Index, Format D, Table 2 10 Pin Connector or Cable 2 Differential, no Index, Format A, Table 1 3 Differential, with Index, Format A, Table 1 5 Differential, with Index, Format B, Table 1 B Differential, with Index Format C, Table 1 D Differential, no Index, Format C, Table 1 available when Code 6 is 0 or 1 5 Pin M12 Connector H Single ended, no index, Format A, Table 4 J Single ended, with index, Format A, Table 4 K Single ended, with index, Format B, Table 4 L Single ended, with index, Format C, Table 4 M Single ended, no index, Format C, Table 4 N Single ended, with index, Format D, Table 4 Code 5: Electrical 0 5-26V in; 5-26V Open Collector with 2.2kΩ Pullup out 1 5-26V in; 5-26V Open Collector out 2 5-26V in; 5V Totem Pole out 3 5-26V in; 5V Line Driver out 4 5-26V in; 5-26V Line Driver out A B C D E Same as "0" with extend. temp range Same as "1" with extend. temp range Same as "2" with extend. temp range Same as "3" with extend. temp range Same as "4" with extend. temp range available when Code 6 is 0 or 1 8 Pin M12 Connector P Single ended, no index, Format A, Table 5 Q Single ended, with index, Format A, Table 5 R Single ended, with index, Format B, Table 5 S Single ended, with index, Format C, Table 5 T Single ended, no index, Format C, Table 5 U Single ended, with index, Format D, Table 5 V Differential, no index, Format A, Table 6 W Differential, with index, Format A, Table 6 X Differential, with index, Format B, Table 6 Y Differential, with index, Format C, Table 6 Z Differential, no index, Format C, Table 6 0, 2, 6 0 1, 3, 4, 5 add $36.00 1 to 4 add $10.00 A, B, G add $36.00 A add $33.00 C, D B to E add $45.00 H to N add $28.00 P to Z add $38.00 Code 6: Termination 0 End Mount Connector 1 Side Mount Connector Available when Code 1is HC525 and Code 4 is 0 thru G: 2 18" Cable, Side 3 3' Cable, Side 4 6' Cable, Side 5 10' Cable, Side 6 15' Cable, Side J K L M N 18" Cable, End 3' Cable, End 6' Cable, End 10' Cable, End 15' Cable, End Available when Code 1is HC625and Code 4 is 0 thru G: A 18" Watertight, Side B 3' Watertight, Side C 6' Watertight, Side D 10' Watertight, Side F 15' Watertight, Side P 18" Watertight, End Q 3' Watertight, End R 6' Watertight, End S 10' Watertight, End T 15' Watertight, End 0 1 add $10.00 2, A, J, P add $3.00 3, B, K, Q add $6.00 4, C, L, R add $12.00 5, D, M, S add $23.00 6, F, N, T add $33.00 Code 7: Options Blank None available when Code 4 is 0 thru G, and Code 6 is 0 or 1: PS LED Output Indicator PS $28.00 25
Dynapar brand Series HR25 HR 25 HR525 Size 25 Enclosed, Shielded Bearings HR625 Size 25 Enclosed, with Shaft Seal HR525 Base Price $470.00 HR625 Base Price $498.00 DC = DI; RC = N Code 3: Mechanical 0001 0010 0012 0050 0060 0086 0100 0120 0200 0240 0001 thru 1000 0250 0300 0360 0400 0500 0600 0800 1000 add $17.00 0 Flange Mount, 3/8" Shaft 1 2.50" Servo Mount/ 4 Hole, 2.00" BC Face Mount, 3/8" Shaft 2 Flange Mount, 1/4" Shaft 3 2.50" Servo Mount/ 4 Hole 2.00" BC Face Mount, 1/4" Shaft 4 2.50" Servo Mount/ 3 Hole, 2.00" BC Face Mount, 3/8" Shaft 5 2.50" Servo Mount/ 3 Hole, 2.00" BC Face Mount, 1/4" Shaft 6 2.50" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 3/8" Shaft 7 2.50" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 1/4" Shaft 8 2.62" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 3/8" Shaft 9 2.62" Servo Mount/ 3 Hole, 1.88" BC Face Mount, 1/4" Shaft 0 1 to 5 add $10.00 6 7 to 9 add $10.00 Lead Time (Days) = 3 Encoder Catalog Code 4: Output Code 5: Electrical Code 6: Termination Code 7: Options 7 Pin Connector or Cable 0 Single Ended, no Index, Format A, Table 2 1 Single Ended, with Index, Format A, Table 2 4 Single Ended, with Index, Format B, Table 2 6 Differential, no Index, Format C, Table 3 A Single Ended, with Index, Format C, Table 2 C Single Ended, no Index, Format C, Table 2 G Single Ended, with Index, Format D, Table 2 10 Pin Connector or Cable 2 Differential, no Index, Format A, Table 1 3 Differential, with Index, Format A, Table 1 5 Differential, with Index, Format B, Table 1 B Differential, with Index Format C, Table 1 D Differential, no Index, Format C, Table 1 available when Code 6 is 0 or 1 5 Pin M12 Connector H Single ended, no index, Format A, Table 4 J Single ended, with index, Format A, Table 4 K Single ended, with index, Format B, Table 4 L Single ended, with index, Format C, Table 4 M Single ended, no index, Format C, Table 4 N Single ended, with index, Format D, Table 4 available when Code 6 is 0 or 1 8 Pin M12 Connector P Single ended, no index, Format A, Table 5 Q Single ended, with index, Format A, Table 5 R Single ended, with index, Format B, Table 5 S Single ended, with index, Format C, Table 5 T Single ended, no index, Format C, Table 5 U Single ended, with index, Format D, Table 5 V Differential, no index, Format A, Table 6 W Differential, with index, Format A, Table 6 X Differential, with index, Format B, Table 6 Y Differential, with index, Format C, Table 6 Z Differential, no index, Format C, Table 6 0, 2, 6 1, 3, 4, 5 add $36.00 A, B, G add $36.00 C, D H to N add $28.00 P to Z add $38.00 0 5-26V in; 5-26V Open Collector with 2.2kΩ Pullup out 1 5-26V in; 5-26V Open Collector out 2 5-26V in; 5V Totem Pole out 3 5-26V in; 5V Line Driver out (7272) 4 5-26V in; 5-26V Line Driver out (7272) 5 5-26V in, 5V Differential Line Driver out (4469) 6 5-15V in, 5-15V Differential Line Driver out (4469) A Same as "0" with extend. temp range B Same as "1" with extend. temp range C Same as "2" with extend. temp range D Same as "3" with extend. temp range E Same as "4" with extend. temp range 0 1 to 4 add $10.00 5, 6 add $28.00 A add $33.00 B to E add $45.00 0 End Mount Connector 1 Side Mount Connector available when Code 4 is 0 thru G: 2 18" Cable, Side 3 3' Cable, Side 4 6' Cable, Side 5 10' Cable, Side 6 15' Cable, Side J 18" Cable, End K 3' Cable, End L 6' Cable, End M 10' Cable, End N 15' Cable, End available when Code 1 is HR625 and Code 4 is 0 thru G:: A 18" Watertight, Side B 3' Watertight, Side C 6' Watertight, Side D 10' Watertight, Side F 15' Watertight, Side P 18" Watertight, End Q 3' Watertight, End R 6' Watertight, End S 10' Watertight, End T 15' Watertight, End 0 1 add $10.00 2, A, J, P add $3.00 3, B, K, Q add $6.00 4, C, L, R add $12.00 5, D, M, S add $23.00 6, F, N, T add $33.00 available when Code 4 is 0 thru G, and Code 6 is 0 or 1: PS LED Output Indicator PS $28.00 26