QR General data QR control component range For a mounting hole diameter of.3 mm to IEC 60947 50V/10A max. Water-jet proof IP65 collar shapes The lamps of the pushbuttons can also be replaced from the front The contact blocks (silver or gold contacts) snap onto the actuators with a coupling Screw terminals, cage clamp terminals or RJ1 connector 3 NC + 3 NO max. The specified data apply only if actuators/signal indicators are combined with contact blocks and lamp sockets within the same product range. QR Content QR control component assemblies - 98 QR assembly: Pushbutton, round, illuminated, flush lens, metallized front ring and silver contact block - 99 QR assembly: Emergency stop pushbutton and silver contact block - 99 QR assembly: Signal indicator and lamp socket - 100 QR pushbutton - 10 QR pushbutton, flush lens, round collar - 103 QR pushbutton, protruding lens, round collar - 104 QR pushbutton, protruding front ring, round collar - 105 QR pushbutton, flush lens, square collar - 106 QR pushbutton, protruding lens, square collar - 107 QR pushbutton, protruding front ring, square collar - 108 QR selector switch - 110 QR selector switch, round collar, short handle - 111 QR selector switch, round collar, long handle - 11 QR selector switch, square collar, short handle - 113 QR selector switch, square collar, long handle - 114 QR keylock switch - 116 QR keylock switch, round collar - 117 QR keylock switch, square collar - 118 Stock items are marked - 93
QR QR QR mushroom-headed pushbutton - 10 QR mushroom-headed pushbutton 40 mm, round collar - 11 QR mushroom-headed pushbutton 40 mm, illuminated, round collar - 11 QR mushroom-headed pushbutton 60 mm, round collar - 1 QR mushroom-headed pushbutton 40 mm, square collar - 1 QR mushroom-headed pushbutton 40 mm, illuminated, square collar - 13 QR mushroom-headed pushbutton 60 mm, square collar - 13 QR emergency stop pushbutton, dupe-proof to EN 418-14 QR emergency stop pushbutton, dupe-proof to EN 418-15 QR emergency stop pushbutton, dupe-proof to EN 418, with indication to EN 60947-1 - 15 QR emergency stop pushbutton, dupe-proof to EN 418, with keylock - 16 QR emergency stop pushbutton, dupe-proof to EN 418, illuminated - 16 QR twin pushbutton - 18 QR twin pushbutton, oval collar - 19 QR twin pushbutton, rectangular collar - 130 QR potentiometer drive - 13 QR potentiometer drive, round collar - 133 QR potentiometer drive, square collar - 133 QR buzzer - 134 QR buzzer, round collar - 135 QR buzzer, square collar - 135 QR signal indicator - 136 QR signal indicator, round collar - 137 QR signal indicator, square collar - 137 QR contact blocks with silver contacts, screw terminals and cage clamp terminals - 138 QR contact block with silver contacts - 139 QR contact block assembly, with coupling, without lamp socket, silver contacts - 140 QR contact block assembly, with coupling and lamp socket, silver contacts - 141 QR contact blocks with gold contacts, screw terminals and cage clamp terminals - 14 QR contact block with gold contacts - 143 QR contact block assembly, with coupling, without lamp socket, gold contacts - 144 QR contact block assembly, with coupling and lamp socket, gold contacts - 145 Contact block with coupling, gold contacts, RJ 1 connector, integrated LED - 146 Contact block with coupling, gold contacts, RJ 1 connector, integrated LED - 147 QR lamp sockets BA 9s (MBC/MCC), screw terminals and cage clamp terminals - 148 QR lamp socket, without coupling - 149 QR lamp socket assembly, with coupling - 150 QR lamp sockets with integrated LED, screw terminals - 15 QR lamp socket with integrated red LED, without coupling - 153 QR special accessories - 154 Housings for flush pushbuttons - 154 Lenses for flush pushbuttons - 155 Front ring - 156 QR plastic front ring with protective cap - 156 Label holder - 157 Legend labe to clip label holder 5.07.60.xxx - 157 Coupling - 158 Blanking cap - 158 Ring nut - 159 Lamp tester - 159 Protective cover, suitable for pushbuttons with flush lens - 159 Marking tag - 160 Insulating housing IP65 for QR - 160 Emergency stop label plate - 161-94 Stock items are marked
QR Contact blocks marked with different colours for ease of identification in stock and when connecting. NC contacts: red NO contacts: green NC/NO contacts: red/green Lamp socket: black Silver contacts: basic housing colour is black Gold contacts: basic housing colour is grey The terminals associated with a contact pair are colour coded on the connection side and marked with the respective contact numbers. The lamps of pushbuttons and signal lamps can be replaced from the front. This method saves time and increases safety since it eliminates the need for accessing the machine/ control station interior and handling live cables for lamp replacement. After unscrewing the front ring, the lens can be removed and the lamp replaced. QR cast-on collar seal The components feature a removable locating lug. If installed without locating lug, the ring nut with claw can be used. Accurate alignment of the actuator can be achieved behind the front panel. The cast-on collar seal can not get lost nor be twisted during installation and allows single-person assembly: the actuator is held in the mounting hole by the cast-on seal and can then be fixed by screwing from the rear. First, snap the lamp socket and contact blocks into the coupling. Then snap the assembly on to the actuator. To release it, the bayonet must be pressed (prevents inadvertent releasing at the same time). Control Components - 95
QR Terminals Screw terminals, cage clamp or RJ 1 The QR contact blocks are available in three different connection styles as required for your application: Screw terminals The terminals are open and the captive screws are mounted in the terminal recess. Cage clamp terminals Simply insert a screwdriver to open the terminal, insert the cable and remove the screwdriver to close the terminal. RJ 1-terminal Just plug in the cable with a RJ 1 connector. Details see page 5. Your advantage: This offers your savings in three ways: Drastically reduced assembly time thanks to wire insertion from the rear, i.e. no more bending and lateral insertion of the wires required. You save material: No wire end sleeves are required. You save the time previously required for mounting the wire end sleeves. Assembly Screw terminals Insert the wire. Tighten the screw. Cage clamp terminals Open the terminal. Insert the wire. QR Sealed for life against humidity and dirt The special seal reliably prevents moisture, oil and dust from penetrating to the contact block. In contrast to other sealing types which move up and down the shaft, this special seal is firmly seated on the housing (degree of protection IP 65 to DIN). Done. Remove the screwdriver. Versatility of design for customized panels The QR system does not only have a particularly low profile and is also available in many different versions. Your design options for your customized panels are nearly unlimited thanks to the interchangeable front rings and lenses. In this way you can achieve an attractive design while ensuring safe operation of your equipment at the same time. QR components are available either with a round or with a square collar. - 96 Control Components
QR The QR control component range meets all the technical requirements and current standards for control units. The system is of modular design. Actuators, contact blocks and lamp sockets can be combined freely. This means that you may implement modifications of design or configuration even at the last minute. An additional positive effect is the reduction of stockholding costs. Sequence of assembly/disassembly at screw terminals and cage clamp terminals Fix the actuator in the front panel with the ring nut. Snap the individual elements (a maximum three contact blocks or two contact blocks together with a lamp socket) in the coupling. You can install them on any assembling axis. Insert the lamp or LED into the lamp socket. Assembly Disassembly Approvals = approved, = pending Part no. BG zert. VDE 0660 10/15 ULc GL 1.0 14. 1.0 15. 1.30 43. 1.71 13. 1.71 14. QR 30.00 Panel cut-out according to IEC 60947-5-1 All actuators are provided with a locating lug which may be removed using a screwdriver for installation into mounting holes if required. 50.00 With a grid spacing of 30 mm horizontally and 50 mm vertically, the collars of the square actuators touch each other. We revommend to use the same grid spacing also for the round collar shapes (IEC 947). Dimensioned drawing Control Components - 97
QR QR control component assemblies Pict.: 1 NO, lamp socket, red lens with contact block panel cut-out acc. to IEC 60947-5-1 Technical data QR General information Form of lens Colour of lens Colout of front ring Form of collar Dimensions Key grid Diameter of collar Overall height Mounting depth Mounting hole Mechanical design Mounting Contact function Illuminability Contact arrangement Mechanical characteristics Operating force max. Robustness min. round 50 x 30 mm 9.8 mm 56.4 mm.3 mm ring nut approx. 5 N for 1 switching element 100 N Electrical characteristics Protection class Other specifications Degree of protection from front side IP65 Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment Ambient temp. operating min. -5 C Ambient temp. operating II according to IEC 600 68--3 and -30 according to IEC 600 68--14 and -33 max. +70 C Approvals ENEC 10/15, ULC Accessories QR control component assemblies Description Photo Order no. Page Filament lamp, BA 9s base (MBC/MCC), 4-30 V 1.90.060.133/0000 5-8 Neon lamp BA 9s (MBC/MCC), 0 V AC (red) 1.90.560.10/0000 5-9 LED BA 9s (MBC/MCC) superbright, white, 4 V 1.90.690.345/0000 5-0 Fixing spanner for ring nut and front ring 5.05.800.06/0000 5-5 Label holder, round collar, with adhesive tape and release liner on back 5.07.60.010/0000-157 - 98 Stock items are marked
QR QR assembly: Pushbutton, round, illuminated, flush lens, metallized front ring and silver contact block Pict.: 1 NO, lamp socket, red lens panel cut-out acc. to IEC 60947-5-1 Contact arrangement Contact function Colour of lens Order no. complete Order no. single parts Contact block Actuator 1 NO momentary transparent 9.0.14.001/1000 1.0.14.0/0000 1.30.40.01/1000 colourless 1 NO momentary transparent red 9.0.14.001/1300 1.0.14.0/0000 1.30.40.01/1300 1 NO momentary transparent yellow 9.0.14.001/1400 1.0.14.0/0000 1.30.40.01/1400 1 NO momentary transparent green 9.0.14.001/1500 1.0.14.0/0000 1.30.40.01/1500 1 NO momentary transparent blue 9.0.14.001/1600 1.0.14.0/0000 1.30.40.01/1600 Technical data see page - 98 Accessories: Filament lamp, BA 9s base (MBC/MCC), 1-15 V: 1.90.060.13/0000 Filament lamp, BA 9s base (MBC/MCC), 4-30 V: 1.90.060.133/0000 Filament lamp, BA 9s base (MBC/MCC), 110-130 V: 1.90.060.137/0000 LED BA 9s (MBC/MCC) superbright, red, 4 V: 1.90.690.341/0000 LED BA 9s (MBC/MCC) superbright, green, 4 V: 1.90.690.34/0000 LED BA 9s (MBC/MCC) superbright, yellow, 4 V: 1.90.690.343/0000 LED BA 9s (MBC/MCC) superbright, blue, 4 V: 1.90.690.344/0000 LED BA 9s (MBC/MCC) superbright, white, 4 V: 1.90.690.345/0000 Legend insert without legend: 5.70.800.000/000 QR QR assembly: Emergency stop Twist to Reset pushbutton and silver contact block Pict.: Emergency stop + 1NC panel cut-out acc. to IEC 60947-5-1 Contact arrangement Contact function Colour of lens Order no. complete Order no. single parts Contact block Actuator 1 NC latching opaque red 9.0.14.030/0300 1.0.14.001/0000 1.30.43.501/0300 1 NC + 1 NO latching opaque red 9.0.14.031/0300 1.0.14.017/0000 1.30.43.501/0300 Technical data see page - 98 Accessories: Emergency stop label, yellow, round 60 mm, PVC adhesive, with legend "NOT-AUS": 5.76.04.101/0400 Emergency stop label, yellow, round 60 mm, rigid PVC, with legend "EMERGENCY-STOP/ARRET D'URGENCE": 5.76.07.00/0400 Stock items are marked - 99
QR QR assembly: Signal indicator and lamp socket Pict.: Signal indicator, yellow lens panel cut-out acc. to IEC 60947-5-1 Contact arrangement Contact function Colour of lens Order no. complete Order no. single parts Contact block Actuator transparent 9.71.13.001/1000 1.71.13.001/0000 1.74.505.501/1000 colourless transparent red 9.71.13.001/1300 1.71.13.001/0000 1.74.505.501/1300 transparent yellow 9.71.13.001/1400 1.71.13.001/0000 1.74.505.501/1400 transparent green 9.71.13.001/1500 1.71.13.001/0000 1.74.505.501/1500 transparent blue 9.71.13.001/1600 1.71.13.001/0000 1.74.505.501/1600 Technical data see page - 98 QR Accessories: Filament lamp, BA 9s base (MBC/MCC), 1-15 V: 1.90.060.13/0000 Filament lamp, BA 9s base (MBC/MCC), 4-30 V: 1.90.060.133/0000 Filament lamp, BA 9s base (MBC/MCC), 110-130 V: 1.90.060.137/0000 LED BA 9s (MBC/MCC) superbright, red, 4 V: 1.90.690.341/0000 LED BA 9s (MBC/MCC) superbright, green, 4 V: 1.90.690.34/0000 LED BA 9s (MBC/MCC) superbright, yellow, 4 V: 1.90.690.343/0000 LED BA 9s (MBC/MCC) superbright, blue, 4 V: 1.90.690.344/0000 LED BA 9s (MBC/MCC) superbright, white, 4 V: 1.90.690.345/0000 Legend insert without legend: 5.70.803.000/000-100 Stock items are marked
QR QR pushbutton Pict.: green with contact block panel cut-out acc. to IEC 60947-5-1 Technical data General information Form of lens Colour of lens Colout of front ring Form of collar Mechanical characteristics Operating travel Operating force max. Robustness min. 4 mm approx. 5 N for 1 switching element 100 N QR Dimensions Length of collar Width of collar Overall height Mounting depth with contact block without cable Mounting hole Key grid Diameter of collar Mechanical design Mounting Contact function Illuminability 56.4 mm.3 mm 50 x 30 mm ring nut Other specifications Operating life (operations) Degree of protection from front side IP65 Ambient temp. operating min. -5 C Ambient temp. operating max. +70 C Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment 1 million momentary/ 0.5 million latching according to IEC 600 68--3 and -30 according to IEC 600 68--14 and -33 Accessories QR pushbutton Description Photo Order no. Page QR contact block with silver contacts, with coupling, without lamp socket, screw terminals, 1 NO QR contact block with silver contacts, with coupling and lamp socket, screw terminals, 1 NC + 1 NO QR contact block with gold contacts, with coupling and lamp socket, screw terminals, 1 NO QR contact block with silver contacts, with coupling and lamp socket, cage clamp terminals, 1 NO, 1 1.0.14.00/0000-140 1.0.14.07/0000-141 1.0.14.1/0000-145 1.0.15.05/0000-141 Filament lamp, BA 9s base (MBC/MCC), 4-30 V 1.90.060.133/0000 5-8 LED BA 9s (MBC/MCC) superbright, white, 4 V 1.90.690.345/0000 5-0 - 10 Stock items are marked
QR Accessories QR pushbutton Description Photo Order no. Page Fixing spanner for ring nut and front ring 5.05.800.06/0000 5-5 Label holder, round collar, with adhesive tape and release liner on back 5.07.60.010/0000-157 For other contact blocks, refer to the chapter Contact blocks ; for additional accessories, refer to QR special accessories. QR pushbutton, flush lens, round collar 1...6mm Mx1.5 1.80 9.80.90 9.40 Pict.: green panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.40.001/10xx 1.30.40.01/1000 1.30.40.011/10xx 1.30.40.031/1000 yes transparent red 1.30.40.001/13xx 1.30.40.01/1300 1.30.40.011/13xx 1.30.40.031/1300 QR yes transparent yellow 1.30.40.001/14xx 1.30.40.01/1400 1.30.40.011/14xx 1.30.40.031/1400 yes transparent green 1.30.40.001/15xx 1.30.40.01/1500 1.30.40.011/15xx 1.30.40.031/1500 yes transparent blue 1.30.40.001/16xx 1.30.40.01/1600 1.30.40.011/16xx 1.30.40.031/1600 no opaque black 1.30.40.101/01xx 1.30.40.11/0100 1.30.40.111/01xx 1.30.40.131/0100 no opaque white 1.30.40.101/0xx 1.30.40.11/000 1.30.40.111/0xx 1.30.40.131/000 no opaque red 1.30.40.101/03xx 1.30.40.11/0300 1.30.40.111/03xx 1.30.40.131/0300 no opaque yellow 1.30.40.101/04xx 1.30.40.11/0400 1.30.40.111/04xx 1.30.40.131/0400 no opaque green 1.30.40.101/05xx 1.30.40.11/0500 1.30.40.111/05xx 1.30.40.131/0500 no opaque blue 1.30.40.101/06xx 1.30.40.11/0600 1.30.40.111/06xx 1.30.40.131/0600 no opaque slate-grey 1.30.40.101/07xx 1.30.40.11/0700 1.30.40.111/07xx 1.30.40.131/0700 Technical data see page - 10 Accessories: Front ring, plastic with protective cap, slate grey: 5.05.004.914/0700 Protective cover, auto-closing: 5.05.511.194/0000 Protective cover, latching: 5.05.511.195/0000 Legend insert without legend: 5.70.800.000/000 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Pushbuttons with plastic front ring and white lens are also available with the following front ring colours: red = 03, yellow = 04, green = 05, blue = 06. Other colour combinations on request. Order numbers 1.30.40.001/ 08, 1.30.40.011/ 08 and 1.30.40.101/ 08 (with silver grey plastic front ring) are stock items. Stock items are marked - 103
QR QR pushbutton, protruding lens, round collar 1...6mm Mx1.5.00 9.80.90 1.45 Pict.: red panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.40.01/10xx 1.30.40.1/1000 1.30.40.11/10xx 1.30.40.31/1000 yes transparent red 1.30.40.01/13xx 1.30.40.1/1300 1.30.40.11/13xx 1.30.40.31/1300 yes transparent yellow 1.30.40.01/14xx 1.30.40.1/1400 1.30.40.11/14xx 1.30.40.31/1400 yes transparent green 1.30.40.01/15xx 1.30.40.1/1500 1.30.40.11/15xx 1.30.40.31/1500 yes transparent blue 1.30.40.01/16xx 1.30.40.1/1600 1.30.40.11/16xx 1.30.40.31/1600 no opaque black 1.30.40.301/01xx 1.30.40.31/0100 1.30.40.311/01xx 1.30.40.331/0100 QR no opaque white 1.30.40.301/0xx 1.30.40.31/000 1.30.40.311/0xx 1.30.40.331/000 no opaque red 1.30.40.301/03xx 1.30.40.31/0300 1.30.40.311/03xx 1.30.40.331/0300 no opaque yellow 1.30.40.301/04xx 1.30.40.31/0400 1.30.40.311/04xx 1.30.40.331/0400 no opaque green 1.30.40.301/05xx 1.30.40.31/0500 1.30.40.311/05xx 1.30.40.331/0500 no opaque blue 1.30.40.301/06xx 1.30.40.31/0600 1.30.40.311/06xx 1.30.40.331/0600 no opaque slate-grey 1.30.40.301/07xx 1.30.40.31/0700 1.30.40.311/07xx 1.30.40.331/0700 Technical data see page - 10 Accessories: Legend insert without legend: 5.70.80.000/000 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Pushbuttons with plastic front ring and white lens are also available with the following front ring colours: red = 03, yellow = 04, green = 05, blue = 06. Other colour combinations on request. Order numbers 1.30.40.01/ 08 and 1.30.40.11/ 08 (with silver grey plastic front ring) are stock items. - 104 Stock items are marked
QR QR pushbutton, protruding front ring, round collar 1...6mm Mx1.5 4.30 9.80.90 1.60 Pict.: red panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.40.401/10xx 1.30.40.41/1000 yes transparent red 1.30.40.401/13xx 1.30.40.41/1300 yes transparent yellow 1.30.40.401/14xx 1.30.40.41/1400 yes transparent green 1.30.40.401/15xx 1.30.40.41/1500 yes transparent blue 1.30.40.401/16xx 1.30.40.41/1600 no opaque black 1.30.40.501/01xx 1.30.40.51/0100 no opaque white 1.30.40.501/0xx 1.30.40.51/000 no opaque red 1.30.40.501/03xx 1.30.40.51/0300 QR no opaque yellow 1.30.40.501/04xx 1.30.40.51/0400 no opaque green 1.30.40.501/05xx 1.30.40.51/0500 no opaque blue 1.30.40.501/06xx 1.30.40.51/0600 no opaque slate-grey 1.30.40.501/07xx 1.30.40.51/0700 Technical data see page - 10 Accessories: Legend insert without legend: 5.70.800.000/000 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 The protruding collar offers protection against inadvertent operation and thereby fulfils the safety requirements of various machinery manufacturers, particularly from the printing industry. Stock items are marked - 105
QR QR pushbutton, flush lens, square collar 1...6mm Mx1.5 1.80 9.80.90 9.40 Pict.: red panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.40.051/10xx 1.30.40.071/1000 1.30.40.061/10xx 1.30.40.081/1000 yes transparent red 1.30.40.051/13xx 1.30.40.071/1300 1.30.40.061/13xx 1.30.40.081/1300 yes transparent yellow 1.30.40.051/14xx 1.30.40.071/1400 1.30.40.061/14xx 1.30.40.081/1400 yes transparent green 1.30.40.051/15xx 1.30.40.071/1500 1.30.40.061/15xx 1.30.40.081/1500 yes transparent blue 1.30.40.051/16xx 1.30.40.071/1600 1.30.40.061/16xx 1.30.40.081/1600 no opaque black 1.30.40.151/01xx 1.30.40.171/0100 1.30.40.161/01xx 1.30.40.181/0100 QR no opaque white 1.30.40.151/0xx 1.30.40.171/000 1.30.40.161/0xx 1.30.40.181/000 no opaque red 1.30.40.151/03xx 1.30.40.171/0300 1.30.40.161/03xx 1.30.40.181/0300 no opaque yellow 1.30.40.151/04xx 1.30.40.171/0400 1.30.40.161/04xx 1.30.40.181/0400 no opaque green 1.30.40.151/05xx 1.30.40.171/0500 1.30.40.161/05xx 1.30.40.181/0500 no opaque blue 1.30.40.151/06xx 1.30.40.171/0600 1.30.40.161/06xx 1.30.40.181/0600 no opaque slate-grey 1.30.40.151/07xx 1.30.40.171/0700 1.30.40.161/07xx 1.30.40.181/0700 Technical data see page - 10 Accessories: Front ring, plastic with protective cap, slate grey: 5.05.004.914/0700 Legend insert without legend: 5.70.800.000/000 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Pushbuttons with plastic front ring and white lens are also available with the following front ring colours: red = 03, yellow = 04, green = 05, blue = 06. Other colour combinations on request. Order numbers 1.30.40.051/ 08, 1.30.40.061/ 08 and 1.30.40.151/ 08 (with silver grey plastic front ring) are stock items. - 106 Stock items are marked
QR QR pushbutton, protruding lens, square collar 1...6mm Mx1.5.00 9.80.90 1.45 Pict.: red panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.40.51/10xx 1.30.40.71/1000 1.30.40.61/10xx 1.30.40.81/1000 yes transparent red 1.30.40.51/13xx 1.30.40.71/1300 1.30.40.61/13xx 1.30.40.81/1300 yes transparent yellow 1.30.40.51/14xx 1.30.40.71/1400 1.30.40.61/14xx 1.30.40.81/1400 yes transparent green 1.30.40.51/15xx 1.30.40.71/1500 1.30.40.61/15xx 1.30.40.81/1500 yes transparent blue 1.30.40.51/16xx 1.30.40.71/1600 1.30.40.61/16xx 1.30.40.81/1600 no opaque black 1.30.40.351/01xx 1.30.40.371/0100 1.30.40.361/01xx 1.30.40.381/0100 no opaque white 1.30.40.351/0xx 1.30.40.371/000 1.30.40.361/0xx 1.30.40.381/000 no opaque red 1.30.40.351/03xx 1.30.40.371/0300 1.30.40.361/03xx 1.30.40.381/0300 QR no opaque yellow 1.30.40.351/04xx 1.30.40.371/0400 1.30.40.361/04xx 1.30.40.381/0400 no opaque green 1.30.40.351/05xx 1.30.40.371/0500 1.30.40.361/05xx 1.30.40.381/0500 no opaque blue 1.30.40.351/06xx 1.30.40.371/0600 1.30.40.361/06xx 1.30.40.381/0600 no opaque slate-grey 1.30.40.351/07xx 1.30.40.371/0700 1.30.40.361/07xx 1.30.40.381/0700 Technical data see page - 10 Accessories: Legend insert without legend: 5.70.80.000/000 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Pushbuttons with plastic front ring and white lens are also available with the following front ring colours: red = 03, yellow = 04, green = 05, blue = 06. Other colour combinations on request. Order numbers 1.30.40.51/ 08 and 1.30.40.61/ 08 (with silver grey plastic front ring) are stock items. Stock items are marked - 107
QR QR pushbutton, protruding front ring, square collar 1...6mm Mx1.5 4.30 9.80.90 1.60 Pict.: green panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of lens Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes transparent white 1.30.40.451/10xx 1.30.40.471/1000 yes transparent red 1.30.40.451/13xx 1.30.40.471/1300 yes transparent yellow 1.30.40.451/14xx 1.30.40.471/1400 yes transparent green 1.30.40.451/15xx 1.30.40.471/1500 yes transparent blue 1.30.40.451/16xx 1.30.40.471/1600 no opaque black 1.30.40.551/01xx 1.30.40.571/0100 QR no opaque white 1.30.40.551/0xx 1.30.40.571/000 no opaque red 1.30.40.551/03xx 1.30.40.571/0300 no opaque yellow 1.30.40.551/04xx 1.30.40.571/0400 no opaque green 1.30.40.551/05xx 1.30.40.571/0500 no opaque blue 1.30.40.551/06xx 1.30.40.571/0600 no opaque slate-grey 1.30.40.551/07xx 1.30.40.571/0700 Technical data see page - 10 Accessories: Legend insert without legend: 5.70.800.000/000 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 The protruding collar offers protection against inadvertent operation and thereby fulfils the safety requirements of various machinery manufacturers, particularly in the industry. - 108 Stock items are marked
QR QR selector switch Front ring, metallized, illuminated panel cut-out acc. to IEC 60947-5-1 General data The illuminated selector switches are provided with translucent handle markings. These are opaque on the nonilluminated versions. Technical data QR General information Form of handle Colour of lens Colout of front ring Form of collar Dimensions Length of collar Width of collar Overall height Mounting depth with contact block without cable Mounting hole Key grid Diameter of collar Mechanical design Mounting Contact function Illuminability Rotating angle white. mm 56.4 mm.3 mm 50 x 30 mm ring nut Mechanical characteristics Operating force max. Torque max. Electrical characteristics Protection class Other specifications Operating life Degree of protection from front side IP65 Ambient temp. operating min. -7 C Ambient temp. operating max. +70 C Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment approx. 5 N for 1 switching element Nm II 0.5 million according to IEC 600 68--3 and -30 according to IEC 600 68--14 and -33 Accessories QR selector switch Description Photo Order no. Page QR contact block with silver contacts, with coupling, without lamp socket, screw terminals, 1 NC + 1 QR contact block with silver contacts, with coupling and lamp socket, screw terminals, 1 NC + 1 NO QR contact block with gold contacts, with coupling and lamp socket, screw terminals, 1 NC + 1 NO, 1 NC + 1 NO Contact block with coupling, gold contacts, RJ 1 connector, 1 NC + 1 NO, white LED 1.0.14.017/0000-140 1.0.14.07/0000-141 1.0.14.18/0000-145 1.0.18.013/0000-147 - 110 Stock items are marked
QR Accessories QR selector switch Description Photo Order no. Page Label holder, round collar, with adhesive tape and release liner on back 5.07.60.010/0000-157 For other contact blocks, refer to the chapter Contact blocks ; for additional accessories, refer to QR special accessories. QR selector switch, round collar, short handle Pict.: Front ring, silver grey, non-illuminated panel cut-out acc. to IEC 60947-5-1 Illuminability Contact function Rotating angle Drehwinkel Order no. Plastic front ring Metal front ring yes momentary 1 x 40 1Ö + 1S 1.30.4.001/xx 1.30.4.00/00 yes momentary x 40 1Ö + 1S 1.30.4.06/xx 1.30.4.07/00 yes latching 1 x 90 and 1 x 90 and 1 x 40 0 1Ö + 1S 1.30.4.46/xx 1.30.4.47/00 momentary 1 x 40 yes latching 1 x 90, form L 1Ö + 1S 1.30.4.101/xx 1.30.4.10/00 QR yes latching 1 x 90, form V 1Ö + 1S 1.30.4.01/xx 1.30.4.0/00 yes latching x 60 1Ö + 1S 1.30.4.301/xx 1.30.4.30/00 yes latching x 90 1Ö + 1S 1.30.4.16/xx 1.30.4.17/00 no momentary 1 x 40 1Ö + 1S 1.30.4.501/0xx 1.30.4.50/000 no momentary x 40 1Ö + 1S 1.30.4.56/0xx 1.30.4.57/000 no latching 1 x 90 and 1 x 90 and 1 x 40 0 1Ö + 1S 1.30.4.96/0xx 1.30.4.97/000 momentary 1 x 40 no latching 1 x 90, form L 1Ö + 1S 1.30.4.601/0xx 1.30.4.60/000 no latching 1 x 90, form V 1Ö + 1S 1.30.4.701/0xx 1.30.4.70/000 no latching x 60 1Ö + 1S 1.30.4.801/0xx 1.30.4.80/000 no latching x 90 1Ö + 1S 1.30.4.66/0xx 1.30.4.67/000 Technical data see page - 110 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08; other colours on request. Included: Ring nut with claw. On keylock switches with 3 switching positions (e.g. x 90 degrees), either the left-hand or right-hand contact block is activated, depending on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation. The following selector switches with silver grey plastic front ring are stock items: Illuminated: 1.30.5.001/08, 1.30.5.06/08, 1.30.5.101/08, 1.30.5.01/08, 1.30.5.301/08 Non-illuminated: 1.30.5.501/008, 1.30.5.56/008, 1.30.5.601/008, 1.30.5.701/008, 1.30.5.801/008 Stock items are marked - 111
QR QR selector switch, round collar, long handle 1...6 Mx1.5 9.80 9.10.90.0 Pict.: Front ring, metallized, illuminated panel cut-out acc. to IEC 60947-5-1 Illuminability Contact function Rotating angle Drehwinkel Order no. Plastic front ring Metal front ring yes momentary 1 x 40 1Ö + 1S 1.30.4.011/xx 1.30.4.01/00 yes momentary x 40 1Ö + 1S 1.30.4.036/xx 1.30.4.037/00 yes latching 1 x 90 and momentary 1 x 40 0 1 x 90 and 1 x 40 1Ö + 1S 1.30.4.436/xx 1.30.4.437/00 yes latching 1 x 90, form L 1Ö + 1S 1.30.4.111/xx 1.30.4.11/00 yes latching 1 x 90, form V 1Ö + 1S 1.30.4.11/xx 1.30.4.1/00 yes latching x 60 1Ö + 1S 1.30.4.311/xx 1.30.4.31/00 QR yes latching x 90 1Ö + 1S 1.30.4.136/xx 1.30.4.137/00 no momentary 1 x 40 1Ö + 1S 1.30.4.511/0xx 1.30.4.51/000 no momentary x 40 1Ö + 1S 1.30.4.536/0xx 1.30.4.537/000 no latching 1 x 90 and momentary 1 x 40 0 1 x 90 and 1 x 40 1Ö + 1S 1.30.4.936/0xx 1.30.4.937/000 no latching 1 x 90, form L 1Ö + 1S 1.30.4.611/0xx 1.30.4.61/000 no latching 1 x 90, form V 1Ö + 1S 1.30.4.711/0xx 1.30.4.71/000 no latching x 60 1Ö + 1S 1.30.4.811/0xx 1.30.4.81/000 no latching x 90 1Ö + 1S 1.30.4.636/0xx 1.30.4.637/000 Technical data see page - 110 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08; other colours on request. Included: Ring nut with claw. On selector switches with 3 switching positions (e.g. x 90 degrees), either the left-hand or right-hand contact block is activated, depending on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation. - 11 Stock items are marked
QR QR selector switch, square collar, short handle Pict.: Front ring, non-illuminated panel cut-out acc. to IEC 60947-5-1 Illuminability Contact function Rotating angle Drehwinkel Order no. Plastic front ring Metal front ring yes momentary 1 x 40 1Ö + 1S 1.30.4.051/xx 1.30.4.05/00 yes momentary x 40 1Ö + 1S 1.30.4.076/xx 1.30.4.077/00 yes latching 1 x 90 and momentary 1 x 40 0 1 x 90 and 1 x 40 1Ö + 1S 1.30.4.476/xx 1.30.4.477/00 yes latching 1 x 90, form L 1Ö + 1S 1.30.4.151/xx 1.30.4.15/00 yes latching 1 x 90, form V 1Ö + 1S 1.30.4.51/xx 1.30.4.5/00 yes latching x 60 1Ö + 1S 1.30.4.351/xx 1.30.4.35/00 yes latching x 90 1Ö + 1S 1.30.4.176/xx 1.30.4.177/00 no momentary 1 x 40 1Ö + 1S 1.30.4.551/0xx 1.30.4.55/000 QR no momentary x 40 1Ö + 1S 1.30.4.576/0xx 1.30.4.577/000 no latching 1 x 90 and momentary 1 x 40 0 1 x 90 and 1 x 40 1Ö + 1S 1.30.4.976/0xx 1.30.4.977/000 no latching 1 x 90, form L 1Ö + 1S 1.30.4.651/0xx 1.30.4.65/000 no latching 1 x 90, form V 1Ö + 1S 1.30.4.751/0xx 1.30.4.75/000 no latching x 60 1Ö + 1S 1.30.4.851/0xx 1.30.4.85/000 no latching x 90 1Ö + 1S 1.30.4.676/0xx 1.30.4.677/000 Technical data see page - 110 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08; other colours on request. Included: Ring nut with claw. On selector switches with 3 switching positions (e.g. x 90 degrees), either the left-hand or right-hand contact block is activated, depending on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation. The following selector switches with silver grey plastic front ring are stock items: Illuminated: 1.30.4.051/08, 1.30.4.076/08, 1.30.4.151/08, 1.30.4.51/08, 1.30.4.351/08 Non-illuminated: 1.30.4.551/008, 1.30.4.576/008, 1.30.4.651/008, 1.30.4.751/008, 1.30.4.851/008 Stock items are marked - 113
QR QR selector switch, square collar, long handle Pict.: Front ring, black, non-illuminated panel cut-out acc. to IEC 60947-5-1 Illuminability Contact function Rotating angle Drehwinkel Order no. Plastic front ring Metal front ring yes momentary 1 x 40 1Ö + 1S 1.30.4.061/xx 1.30.4.06/00 yes momentary x 40 1Ö + 1S 1.30.4.086/xx 1.30.4.087/00 yes latching 1 x 90 and momentary 1 x 40 0 1 x 90 and 1 x 40 1Ö + 1S 1.30.4.486/xx 1.30.4.487/00 yes latching 1 x 90, form L 1Ö + 1S 1.30.4.161/xx 1.30.4.16/00 yes latching 1 x 90, form V 1Ö + 1S 1.30.4.61/xx 1.30.4.6/00 yes latching x 60 1Ö + 1S 1.30.4.361/xx 1.30.4.36/00 QR yes latching x 90 1Ö + 1S 1.30.4.186/xx 1.30.4.187/00 no momentary 1 x 40 1Ö + 1S 1.30.4.561/0xx 1.30.4.56/000 no momentary x 40 1Ö + 1S 1.30.4.586/0xx 1.30.4.587/000 no latching 1 x 90 and momentary 1 x 40 0 1 x 90 and 1 x 40 1Ö + 1S 1.30.4.986/0xx 1.30.4.987/000 no latching 1 x 90, form L 1Ö + 1S 1.30.4.661/0xx 1.30.4.66/000 no latching 1 x 90, form V 1Ö + 1S 1.30.4.761/0xx 1.30.4.76/000 no latching x 60 1Ö + 1S 1.30.4.861/0xx 1.30.4.86/000 no latching x 90 1Ö + 1S 1.30.4.686/0xx 1.30.4.687/000 Technical data see page - 110 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08; other colours on request. Included: Ring nut with claw. On selector switches with 3 switching positions (e.g. x 90 degrees), either the left-hand or right-hand contact block is activated, depending on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation. - 114 Stock items are marked
QR QR keylock switch QR Technical data General information Form of lens Colout of front ring Form of collar Dimensions Length of collar Width of collar Overall height 30.6 mm Mounting depth with contact block without cable 56.4 mm Mounting hole.3 mm Key grid 50 x 30 mm Diameter of collar Mechanical design Mounting ring nut Contact function Illuminability no Lock Ronis Wafers 4 Lock type 455 Main key no Symmetric key no Rotating angle Key removal position Mechanical characteristics Operating force max. Torque max. Electrical characteristics Protection class panel cut-out acc. to IEC 60947-5-1 approx. 5 N for 1 switching element Nm Other specifications Operating life 0.3 million momentary / 50000 latching Degree of protection from front side IP65 Ambient temp. operating min. -5 Ambient temp. operating max. +70 Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment II according to IEC 600 68--3 and -30 according to IEC 600 68--14 and -33 Accessories QR keylock switch Description Photo Order no. Page QR contact block with silver contacts, with coupling, without lamp socket, screw terminals, 1 NC + 1 QR contact block with silver contacts, with coupling, without lamp socket, cage clamp terminals, 1 Contact block with coupling, gold contacts, RJ 1 connector, 1 NC + 1 NO, without LED Label holder, round collar, with adhesive tape and release liner on back 1.0.14.017/0000-140 1.0.15.00/0000-140 1.0.18.003/0000-147 5.07.60.010/0000-157 Spare key for QR 5.58.017.001/0000-116 Stock items are marked
QR QR keylock switch, round collar panel cut-out acc. to IEC 60947-5-1 Contact function Rotating angle Key removal position Rotating angle Plastic front ring Order no. Metal front ring momentary 1 x 40 0 1Ö + 1S 1.30.45.001/xxxx 1.30.45.00/0000 momentary x 40 0 1Ö + 1S 1.30.45.101/xxxx 1.30.45.10/0000 latching 1 x 90 and momentary 1 x 40 latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 1 x 90 and 1 x 40 0 0 1Ö + 1S 0 0+ 1Ö + 1S 1.30.45.501/xxxx 1.30.45.50/0000 1.30.45.51/xxxx 1.30.45.5/0000 latching 1 x 90, form L 0 1Ö + 1S 1.30.45.01/xxxx 1.30.45.0/0000 latching 1 x 90, form L 0+1 1Ö + 1S 1.30.45.1/xxxx 1.30.45./0000 latching 1 x 90, form V 0 1Ö + 1S 1.30.45.301/xxxx 1.30.45.30/0000 latching 1 x 90, form V 0+1 1Ö + 1S 1.30.45.31/xxxx 1.30.45.3/0000 QR latching x 60 0+1+ 1Ö + 1S 1.30.45.731/xxxx 1.30.45.73/0000 latching x 90 0 1Ö + 1S 1.30.45.401/xxxx 1.30.45.40/0000 latching x 90 0+1+ 1Ö + 1S 1.30.45.431/xxxx 1.30.45.43/0000 Technical data see page - 116 xxxx = Front ring colour: black = 0100, slate grey = 0700, silver grey = 0800. Other versions on request. Included: Ring nut with claw. On selector switches with 3 switching positions (e.g. x 90 degrees), either the left-hand or right-hand contact block is activated, depending on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation. The following keylock switches with silver grey plastic front ring are stock items: 1.30.45.001/0800, 1.30.45.01/0800, 1.30.45.1/0800, 1.30.45.301/0800, 1.30.45.31/0800, 1.30.45.731/0800 Stock items are marked - 117
QR QR keylock switch, square collar panel cut-out acc. to IEC 60947-5-1 Contact function Rotating angle Key removal position Rotating angle Plastic front ring Order no. Metal front ring momentary 1 x 40 0 1Ö + 1S 1.30.45.051/xxxx 1.30.45.05/0000 momentary x 40 0 1Ö + 1S 1.30.45.151/xxxx 1.30.45.15/0000 latching 1 x 90 and momentary 1 x 40 latching 1 x 90 and momentary 1 x 40 1 x 90 and 1 x 40 1 x 90 and 1 x 40 0 0 1Ö + 1S 0 0+ 1Ö + 1S latching 1 x 90, form L 0 1Ö + 1S 1.30.45.51/xxxx 1.30.45.5/0000 1.30.45.551/xxxx 1.30.45.55/0000 1.30.45.571/xxxx 1.30.45.57/0000 latching 1 x 90, form L 0+1 1Ö + 1S 1.30.45.71/xxxx 1.30.45.7/0000 QR latching 1 x 90, form V 0 1Ö + 1S 1.30.45.351/xxxx 1.30.45.35/0000 latching 1 x 90, form V 0+1 1Ö + 1S 1.30.45.371/xxxx 1.30.45.37/0000 latching x 60 0+1+ 1Ö + 1S 1.30.45.781/xxxx 1.30.45.78/0000 latching x 90 0 1Ö + 1S 1.30.45.451/xxxx 1.30.45.45/0000 latching x 90 0+1+ 1Ö + 1S 1.30.45.481/xxxx 1.30.45.48/0000 Technical data see page - 116 xxxx = Front ring colour: black = 0100, slate grey = 0700, silver grey = 0800. Other versions on request. Included: Ring nut with claw. On keylock switches with 3 switching positions (e.g. x 90 degrees), either the left-hand or right-hand contact block is activated, depending on the sense of rotation. A third contact block arranged in the centre would be actuated with either sense of rotation. The following keylock switches with silver grey plastic front ring are stock items: 1.30.45.051/0800, 1.30.45.51/0800, 1.30.45.71/0800, 1.30.45.351/0800, 1.30.45.371/0800, 1.30.45.781/0800-118 Stock items are marked
QR QR mushroom-headed pushbutton Pict.: Front ring, metallized Front ring, slate grey panel cut-out acc. to IEC 60947-5-1 Technical data QR General information Form of lens Colour of mushroom Colout of front ring Form of collar Dimensions Length of collar Width of collar Overall height Mounting depth Mounting hole Key grid Diameter of collar Mechanical design Mounting Contact function Illuminability mushroom formed 0.10 mm 56.4 mm.3 mm 50 x 30 mm ring nut Mechanical characteristics Operating force max. Robustness min. Electrical characteristics Protection class Other specifications Operating life 1000000 Degree of protection from front side IP65 Storage temperature min. -40 C Storage temperature max. 80 C Resistance to constant environment Resistance at variable environment approx. 5 N for 1 switching element 100 N II according to IEC 600 68--3 and -30 according to IEC 600 68--14 and -33 Accessories QR mushroom-headed pushbutton Description Photo Order no. Page QR contact block with silver contacts, with coupling, without lamp socket, screw terminals, 1 NC + 1 QR contact block with gold contacts, with coupling, without lamp socket, cage clamp terminals, 1 Contact block with coupling, gold contacts, RJ 1 connector, 1 NO, without LED 1.0.14.017/0000-140 1.0.15.10/0000-144 1.0.18.00/0000-147 Fixing spanner for ring nut and front ring 5.05.800.06/0000 5-5 For other contact blocks, refer to the chapter Contact blocks ; for additional accessories, refer to QR special accessories. - 10 Stock items are marked
QR QR mushroom-headed pushbutton 40 mm, round collar Pict.: Front ring, metallized panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of mushroom Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring no opaque black 1.30.46.501/01xx 1.30.46.50/0100 1.30.46.511/01xx 1.30.46.51/0100 no opaque red 1.30.46.501/03xx 1.30.46.50/0300 1.30.46.511/03xx 1.30.46.51/0300 Technical data see page - 10 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Order number 1.30.46.501/0308 (with silver grey plastic front ring) is a stock item. QR mushroom-headed pushbutton 40 mm, illuminated, round collar QR Pict.: Front ring, slate grey panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of mushroom Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring yes opaque red/ transparent red 1.30.46.001/03xx 1.30.46.00/0300 1.30.46.011/03xx 1.30.46.01/0300 Technical data see page - 10 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Order number 1.30.46.001/0308 (with silver grey plastic front ring) is a stock item. Stock items are marked - 11
QR QR mushroom-headed pushbutton 60 mm, round collar Pict.: Front ring, slate grey panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of mushroom Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring no opaque red 1.30.46.601/03xx 1.30.46.60/0300 Technical data see page - 10 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 QR mushroom-headed pushbutton 40 mm, square collar QR Pict.: Front ring, slate grey panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of mushroom Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring no opaque black 1.30.46.551/01xx 1.30.46.55/0100 1.30.46.561/01xx 1.30.46.56/0100 no opaque red 1.30.46.551/03xx 1.30.46.55/0300 1.30.46.561/03xx 1.30.46.56/0300 Technical data see page - 10 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Order number 1.30.46.551/0308 (with silver grey plastic front ring) is a stock item. - 1 Stock items are marked
QR QR mushroom-headed pushbutton 40 mm, illuminated, square collar Pict.: Front ring, silver grey panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of mushroom Order no. momentary Order no. latching yes opaque red/ transparent red Technical data see page - 10 Plastic front ring xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Metallized front ring Plastic front ring Metallized front ring 1.30.46.051/03xx 1.30.46.05/0300 1.30.46.061/03xx 1.30.46.06/0300 Order number 1.30.46.051/0308 (with silver grey plastic front ring) is a stock item. QR mushroom-headed pushbutton 60 mm, square collar QR Pict.: Front ring, metallized panel cut-out acc. to IEC 60947-5-1 Illuminability Colour of mushroom Order no. momentary Order no. latching Plastic front ring Metallized front ring Plastic front ring Metallized front ring no opaque red 1.30.46.651/03xx 1.30.46.65/0300 Technical data see page - 10 xx = Front ring colour: black = 01, slate grey = 07, silver grey = 08 Stock items are marked - 13
QR QR emergency stop pushbutton, dupe-proof to EN 418 panel cut-out acc. to IEC 60947-5-1 QR General data The emergency stop pushbuttons comply with IEC 60 04, IEC 60 073, IEC 60 947 and VDE 0113 Part 1. They are designed dupe-proof according to EN 418 with a positive mechanical movement sequence. A certain operating force must be exerted at the action point in order to prevent inadvertent operation. The pushbutton latches when pressed and is reset by either turning the actuator in a clockwise direction or pulling the actuator back to the original position. The reset means depends on the model. The special shape of the actuator prevents the emergency stop pushbutton from being blocked. This means that the emergency stop process - once initiated - cannot be impeded by any jamming objects. Only use contact block 1.0.16.4xx. Technical data General information Form of lens Colour of lens Form of collar Dimensions Overall height Mounting depth with contact block without cable Mounting hole Key grid Diameter of collar Mechanical design Mounting Contact function Illuminability Mechanical characteristics Operating force max. mushroom formed round 56.4 mm.3 mm 50 x 30 mm 39.8 mm ring nut latching approx. 5 N for 1 switching element Robustness min. 100 N Robustness acc. IEC 60947-5-5 Other specifications Operating life Degree of protection from front side IP65 Ambient temp. operating min. -5 C Ambient temp. operating max. +70 C Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment according to IEC 600 68--3 and -30 according to IEC 600 68--14 and -33 Accessories QR emergency stop pushbutton, dupe-proof to EN 418 Description Photo Order no. Page QR contact block with silver contacts, with coupling, without lamp socket, screw terminals, 1 NC QR contact block with silver contacts, with coupling, without lamp socket, screw terminals, NC Contact block with coupling, gold contacts, RJ 1 connector, 1 NC, without LED 1.0.14.001/0000-140 1.0.14.019/0000-140 1.0.18.001/0000-147 Fixing spanner for ring nut and front ring 5.05.800.06/0000 5-5 Emergency stop label, yellow, round 60 mm, PVC adhesive, without legend 5.76.04.100/0400-161 - 14 Stock items are marked
QR Accessories QR emergency stop pushbutton, dupe-proof to EN 418 Description Photo Order no. Page Emergency stop label, yellow, round 60 mm, PVC adhesive, with legend "NOT-AUS" Emergency stop label, yellow, round 60 mm, PVC adhesive, with legend "ARRET D'URGENCE" Emergency stop label, yellow, round 60 mm, PVC adhesive, with legend "EMERGENCY-STOP" 5.76.04.101/0400-161 5.76.04.10/0400-161 5.76.04.103/0400-161 Emergency stop label, yellow 36 x 64 mm, PVC adhesive, without legend Emergency stop label, yellow, round 60 mm, rigid PVC, with legend "EMERGENCY-STOP/ARRET D'URGENCE" 5.76.05.011/0400-161 5.76.07.00/0400-161 For other contact blocks, refer to the chapter Contact blocks ; for additional accessories, refer to QR special accessories. QR emergency stop pushbutton, dupe-proof to EN 418 Pict.: red panel cut-out acc. to IEC 60947-5-1 Form of lens Colour of lens Illuminability Operating life Order no. complete QR mushroom formed Twist to Reset mushroom formed Pull to Reset opaque red no 100000 1.30.43.501/0300 opaque red no 100000 1.30.43.901/0300 Technical data see page - 14 Included: Ring nut with claw. Switching position indication: In the non-operated condition, a green ring is visible on the side. QR emergency stop pushbutton, dupe-proof to EN 418, with indication to EN 60947-1 Pict.: red Einbauöffung nach IEC 60947-5-1 Form of lens Colour of lens Illuminability Operating life Order no. complete mushroom formed Twist to Reset opaque red no 100000 1.30.43.601/0300 Technical data see page - 14 Included: Ring nut with claw. Switching position indication: In the non-operated condition, a green ring is visible on the side. This switching position is visible in addition from the front; a mechanical indicator integrated into the mushroom head changes from green to red when actuated. Stock items are marked - 15
QR QR emergency stop pushbutton, dupe-proof to EN 418, with keylock Pict.: red panel cut-out acc. to IEC 60947-5-1 Form of lens Colour of lens Illuminability Operating life Order no. complete mushroom formed Twist to Reset Technical data see page - 14 opaque red no 50000 1.30.43.701/0300 Included: Ring nut with claw, keys. Switching position indication: In the non-operated condition, a green ring is visible on the side. Once actuated, the emergency stop pushbutton can only be reset with the key. QR emergency stop pushbutton, dupe-proof to EN 418, illuminated QR Pict.: red panel cut-out acc. to IEC 60947-5-1 Form of lens Colour of lens Illuminability Operating life Order no. complete mushroom formed Twist to Reset opaque red/ translucent red yes 100000 1.30.43.001/0300 Technical data see page - 14 Included: Ring nut with claw. Switching position indication: In the non-operated condition, a green ring is visible on the side. - 16 Stock items are marked
QR QR twin pushbutton indicator field Pict.: illuminated, flush Front rings flush panel cut-out acc. to IEC 60947-5-1 General data Lens legends are oriented for vertical installation of the twin pushbutton. Only the signal indicator is illuminated on twin pushbuttons prepared for illumination. This area is opaque slate grey on versions which cannot be illuminated. Technical data QR General information Front ring form/legending Colour of lens Colout of front ring Form of collar Dimensions Length of collar Width of collar Overall height Mounting depth with contact block without cable Mounting hole Key grid Mechanical design Mounting Contact function Illuminability opaque green/opaque red 59.6 mm 9.8 mm 9.1 mm 56.4 mm.3 mm 50 x 30 mm ring nut momentary Mechanical characteristics Operating force max. Robustness min. Other specifications Degree of protection from front side IP65 Ambient temp. operating min. -5 C Ambient temp. operating max. +70 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment approx. 5 N for 1 switching element 100 N according to IEC 600 68--3 and -30 according to IEC 600 68--14 and -33 Accessories QR twin pushbutton Description Photo Order no. Page QR contact block with silver contacts, with coupling and lamp socket, screw terminals, 1 NO, 1 NC QR contact block with gold contacts, with coupling and lamp socket, cage clamp terminals, 1 NO, 1 1.0.14.05/0000-141 1.0.15.15/0000-145 Fixing spanner for ring nut and front ring 5.05.800.06/0000 5-5 - 18 Stock items are marked