Basic 4 Models QUICK CHANGE TAP ADAPTER Quick Change S B N SN B S N Quick Change Safety Torque Quick Change Length Adjustment Quick Change S Safety Torque N Length Adjustment In addition to the basic 4 models, wide variety of models (extended size, enlarged size, R type for short shank tap etc.) are available. 456
: Quick Change Tapping chuck and tapping adapter :Simply insert tap adapter into tapping chuck. :Tapping chuck and tap adapter are connected firmly. :Push down on operation sleeve of tapping chuck while removing tap adapter. :Insert tap into bottom of tap adapter, and rotate tap manually to connect them firmly. :Tap and adapter are connected firmly. :Push down on ball bush while removing tap. Safe torque device activates to prevent breakage tap when torque more than fixed amount is applied to tap. (Use with a tapper equipped with axial compensation mechanism.) Tapping adapter and Tap S : Safety torque When using left handed tap adapter, please specify. N : Length adjustment Insert hex. wrench into bottom of tap adapter and turn to adjust tool length. Tap adapter with tool adjustment mechanism can be recommended for following conditions..tool adjustment with prestting gauge..when tap length changes due to re-grinding..when you do not want to use N/C machine tool compensation function. 457
S B Quick Change Tap Adapter Applications For right-hand thread only. Through hole and blind hole. Feature Quick Change Safety torque clutch actuates to prevent tap breakage when an excessive torque is applied to tap. In this case, a tapping chuck with compression device should be used together. For capable tap sizes, please refer to P.46-464 chart. Code Model Tap Size Chuck size D D D L L L4 L5 kg 00 06000 S0B 00 0600 SB 00 06040 S40B 00 0600 SB 00 0600 SB S4B M ~ M8(M0) U/4 ~ U5/6(U/8) M ~ M(M5) U/4 ~ U7/6(U9/6) Pipe(PT,PS,PF)/8 ~ /4 M6 ~ M8 U/4 ~ U/4 M8 ~ M U/8 ~ U7/8 M6 ~ M8 U ~ U /8 7/8 ~ -/4 M ~ M48.Tap sizes in brackets are for light tapping only.. Calculate tap projection length from L dimension..tapping chuck with compression device should be used together. 4.Specify PT, PS or PF when using a pipe tap, as each of them has various safety torque value. 5.L and L6 dimensions fluctuate with tap sizes. Always take into account ±.5mm allowance. 6.Refer to P.46 for tap shank dia. and square dimension. 0.5 5 0 9.5 0.06 9 9 7 5.5 5 0.5 40 40 5 6 0 7 0 0. 50 0 0 5 0.6 7 47 48 44 4 55.5 45.5 4 95 60 60 7 6 6 68 Ordering Example SB M8J Adapter size Tap size 459
Dimension L6 Tapping Capacity Symbol :For JIS (old) Tap For capable tap sizes, please refer to P.46-464 chart. Metric Thread Tap Dimension Uuified Thread Whit-worth Thread Shank Dia. Φ :For Coarse Thread Tap :For light machining on aluminum alloy and the like SN B S B SN B S B 0 SN B S B SN B S B 40 SN B S B SN B S B L6 L6 L6 L6 L6 M NO5,NO6 4. M4 M4.5 NO8 5 4.5 4.5 M5 M5.5 NO0,NO 5.5 4.5.5 4.5 M6 U/4 W/4 6 4.5 4.5 6.5 U5/6 W5/6 6. 5 5 7.5 M8 M7 6. 5 5.5 7 7 M0 M9 U/8 W/8 7 5.5.5 5.5 7 7 M U7/6 W7/6 8 6 6.5 8.5 8.5 M 8.5 6.5 6.5 8 8 U/ W/ 9 7 7 8.5 8.5 M4 M5 U9/6 W9/6 0.5 8 8 40 40 U5/8 W5/8 9 4.5 4.5 M6.5 0 4 4 M7 0 4 4 M8 U/4 W/4 4 4.5 4.5 M0 5 44 M U7/8 W7/8 7 45 M7 M6 U W 0 5 6 M8 7 6.5 U /8 W /8 7 6.5 M0 7 6 M U /4 W /4 4 9 66 M 5 9 66 M5 M4 U /8 W /8 6 68 M6 M8 8 67 Pipe Tap Dimension PT PS PF φ /8 /8 /8 8 6 6.5 /4 /4 /4 9 9 46
Tapping Capacity ANSI Type 0 S0B N0 SN0B SB N SNB SB N SNB SB N SNB 4 S4B Chuck size 0 4 Tap size φ d Tap Shank Unit : Inch Drive #0-6 0.4 0.0 #8 0.68 0. #0 0.94 0.5 # 0.0 0.65 /4 0.55 0.9 5/6 0.8 0.8 #0-6 0.4 0.0 #8 0.68 0. #0 0.94 0.5 # 0.0 0.65 /4 0.55 0.9 5/6 0.8 0.8 /8 0.8 0.86 7/6 0. 0.4 / 0.67 0.75 /8SPT 0. 0.4 /8LPT 0.47 0.8 5/6 0.8 0.8 /8 0.8 0.86 7/6 0. 0.4 / 0.67 0.75 9/6 0.49 0. 5/8 0.480 0.60 /6 0.54 0.406 /4 0.590 0.44 /6 0.65 0.489 7/8 0.697 0.5 /4PT 0.56 0.4 /8PT 0.700 0.5 /PT 0.687 0.55 /6 0.65 0.489 7/8 0.697 0.5 5/6 0.760 0.570 0.800 0.600 -/8 0.896 0.67 -/4.0 0.766 -/8.08 0.8 /PT 0.687 0.55 /4PT 0.906 0.679 PT.5 0.84 7/8 0.697 0.5 5/6 0.760 0.570 0.800 0.600 -/8 0.896 0.67 -/4.0 0.766 -/8.08 0.8 -/. 0.95 -/4.40.07 ISO Type 0 S0B N0 SN0B SB N SNB SB N SNB SB N SNB 4 S4B d Chuck size Tap size Unit : Metric φ d Tap Shank Drive 0 Please contact NT USA for details. 4 M-.4.8 M.5, M.5.0 M.5, M..8.4 M4-, M-.5.5 M4.5, M.5.55.8 M5-, M4-4.0.5 M6-4.5.55 M5-5.0 4.0 M5-5.6 4.5 M8-, M6-6. 5.0 M7 7. 5.6 M, M0-, M8-8.0 6. M, M9 9.0 7. M0-0.0 8.0 M4. 9.0 M5-, M4-4.0.5 M6-4.5.55 M5-5.0 4.0 M5-5.6 4.5 M8-, M6-6. 5.0 M7 7. 5.6 M, M0-, M8-8.0 6. M, M9 9.0 7. M0-0.0 8.0 M4. 9.0 M6.5 0.0 M0, M8 4.0. M 6.0.5 M4 8.0 4.0 M, M9 9.0 7. M0-0.0 8.0 M4. 9.0 M6.5 0.0 M0, M8 4.0. M 6.0.5 M4 8.0 4.0 M0, M7 0.0 6.0 M-.4 8.0 M6, M- 5.0 0.0 M4, M9 8.0.4 M 6.0.5 M4 8.0 4.0 M0, M7 0.0 6.0 M-.4 8.0 M6, M- 5.0 0.0 M4, M9 8.0.4 46
Tapping Capacity DIN Type 0 S0B N0 SN0B SB N SNB SB N SNB SB N SNB 4 S4B Chuck size 0 4 Tap size Unit : Metric φ d Tap Shank Drive M, M5.5.7 M4, M6 4.5.4 M5, M6, M8 6.0 4.9 M0 7.0 5.5 M8, M0 8.0 6. M, M5.5.7 M.5 4.0.0 M4, M6 4.5.4 M5, M6, M8 6.0 4.9 M0 7.0 5.5 M8, M0 8.0 6. M 9.0 7.0 M0 0.0 8.0 M4.0 9.0 M, M5.5.7 M.5 4.0.0 M4, M6 4.5.4 M5, M6, M8 6.0 4.9 M0 7.0 5.5 M8, M0 8.0 6. M 9.0 7.0 M0 0.0 8.0 M4.0 9.0 M6.0 9.0 M8 4.0.0 M0 6.0.0 M, M4 8.0 4.5 M 9.0 7.0 M0 0.0 8.0 M4.0 9.0 M6.0 9.0 M8 4.0.0 M0 6.0.0 M, M4 8.0 4.5 M7, M0 0.0 6.0 M, M6.0 8.0 M6 5.0 0.0 M, M4 8.0 4.5 M7, M0 0.0 6.0 M0.0 8.0 M, M6 5.0 0.0 M6 8.0.0 M9, M4.0 4.0 M45, M48 6.0 9.0 JIS Type 0 S0B N0 SN0B SB N SNB SB N SNB SB N SNB 4 S4B d Chuck size 0 4 Tap size Unit : Metric φ d Tap Shank Drive M 4.0. M4, M4.5 5.0 4.0 M5, M5.5 5.5 4.5 M6 6.0 4.5 M7, M8 6. 5.0 M9, M0 7.0 5.5 M 8.0 6.0 M 4.0. M4, M4.5 5.0 4.0 M5, M5.5 5.5 4.5 M6 6.0 4.5 M7, M8 6. 5.0 M9, M0 7.0 5.5 M 8.0 6.0 M 8.5 6.5 M 9.5 7.0 M4, M5 0.5 8.0 M6 6.0 4.5 M7, M8 6. 5.0 M9, M0 7.0 5.5 M 8.0 6.0 M 8.5 6.5 M 9.5 7.0 M4, M5 0.5 8.0 M6.5 0.0 M7.0 0.0 M8 4.0.0 M0 5.0.0 M 7.0.0 M4, M5 0.5 8.0 M6.5 0.0 M7.0 0.0 M8 4.0.0 M0 5.0.0 M 7.0.0 M4, M5 9.0 5.0 M6, M7 0.0 5.0 M8.0 7.0 M0.0 7.0 M 4.0 9.0 M 5.0 9.0 M4, M5 6.0.0 M6, M8 8.0.0 M 7.0.0 M4, M5 9.0 5.0 M6, M7 0.0 5.0 M8.0 7.0 M0.0 7.0 M 4.0 9.0 M 5.0 9.0 M4, M5 6.0.0 M6, M8 8.0.0 M9, M40 0.0.0 M4.0 6.0 M45 5.0 6.0 M48 8.0 9.0 464
Torque Wrench (for right thread) G type Torque Setting Code Model Adapter size (N-m) GS 050 09000000 G0 0 5 050 0900000 G 0. 0 050 0900000 G.40 0 050 0900000 G 00 050 09000004 GE4-RD4 4,000 5 Setting Shank Setting Socket GS type GW type Oil pressure torque wrench with N-m, divisions. Code Model GS Tapsize 00 0900 GS-M M ~ M8 00 090 GS5-M 5 M ~ M48.Tap size will be inserted in " ".. head of setting shank fit into square part of torque wrench. Code Model Adapter size 00 0900000 GW0 0 00 090000 GW 00 0900040 GW40 40 00 090000 GW 00 090000 GW 00 0900004 GW4 4 Fix square part of setting socket on vise, and then insert tap adapter into it for torque setting. Adjustable Pin Wrench GWA type Code Model Pin diameter Adapter size 050 0900000 GWA0 0 050 090000 GWA.5 050 0900040 GWA40 40 050 0900004 GWA4 6 4 Rotate sled ring of tap adapter by pin wrench for torque adjustment. 465
Tap adapter type S B Torque setting Tap adapter type SN B Torque setting by special tool ) Fix square part of setting socket by using vise. ) Insert tap adapter into the setting socket. ) Insert the setting shank into the tap adapter. 4) Insert square part of torque wrench into head part of setting shank. 5) Check current torque. 6) When changing torque, remove horn part of ox circlip. 7) Insert adjustable pin wrench into pin hole of sled ring. 8) Rotate sled ring clockwise when increase torque or counterclockwise when decrease torque. 9) Check torque again after setting torque. 0) After setting the torque, return horn part of ox circlip to original position to fix sled ring. Torque setting without special tool ) Remove horn part of ox circlip. ) Insert adjustable pin wrench into pin hole of sled ring. ) Rotate sled ring clockwise when increase torque or counterclockwise when decrease torque. Sled ring rotation must be 45 ~ 90 4) After setting the torque, return horn part of ox circlip to original position to fix sled ring. 466
Guidelines for Torque Value Metric Tap Inch Tap PT Tap PS and PF Taps Tap Size Torque (N-m) Tap Size Torque (N-m) Tap Size Torque (N-m) Tap Size Torque (N-m) M.0 /8.0 /8 6.0 /8 8.0 M4. /4 8.0 /4 5.0 /4 6.0 M5.7 5/6 4.0 /8 47.0 /8.0 M6 6.0 /8.0 / 00.0 / 65.0 M7 7.5 7/6.0 /4 0.0 /4 90.0 M8.0 / 45.0 40.0 60.0 M9 4.0 9/6 5.0 /4 70.0 /4 00.0 M0.0 5/8 65.0 /8 00.0 /8 0.0 M 6.0 / 0.0 / 40.0 M.0 /4 90.0 M4 47.0 M6 5.0 7/8 0.0 M8 8.0 M0 90.0 60.0 M 00.0 /8 0.0 M4 5.0 /4 50.0 M7 60.0 /8 5.0 M0 0.0 / 60.0 M 50.0 5/8 580.0 M6 0.0 /4 60.0 M9 5.0 7/8 750.0 M40( 細 ) 0.0 800.0 M4 40.0 M45 480.0 M48 60.0 M50( 細 ) 60.0 467