Appendix A: Lumped Parameter Assumption Using Biot Number

Similar documents
Chapter URL:

TECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS

631 ALLOWANES AND TOLERANCES

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)

Unit 2. DC Motors and Generators UNIT OBJECTIVE DISCUSSION OF FUNDAMENTALS. Operating principle of dc motors

BIMETAL-POINTER-THERMOMETER

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

RESEARCHES ON THE INFLUENCE OF PRESSURE WAVE COMPRESSOR ON THE INTAKE AIR TEMPERATURE AT THE SUPERCHARGED ENGINES

Cable Trolleys for C-Rails Program

Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay

CCS-810 KIT SERIES INSTRUCTION SHEET

11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:

CCD-493 KIT SERIES INSTRUCTION SHEET

Limitations of Using Skid Number in Accident Analysis and Pavement Management

SMP-BC Mixproof Valve

Security Evaluation of DPA Countermeasures Using Dual-Rail Pre-charge Logic Style

Spark Plug Fouling 3.0 Liter OptiMax

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

Small Scale Washing Test System with a Magnetic Stirrer as a Model of Pulsator Type Washing Machine

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

Design and Implementation of the Performance Test System for Battery-Powered Motorcycles

SSAB Water mains PIPES AND FITTINGS

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

Data Sheet T /4/5/6 EN

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

Department of Technology, Yinjian Automobile Repair Co., Ltd., Beijng, China

Research and Implementation of Tractor Power Shift Clutch Control System

(mω) 1. Temperature ( C) Voltage (V) ULRG1 /

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

POWER TRIM. Table of Contents. Section 5D - Auto Trim II

POWER TRIM. Table of Contents. Section 5D - Auto Trim II

Job Sheet 3. Pump Installation OBJECTIVE PROCEDURE. Installation of the Motor and Centrifugal Pump on the Pump Universal Base

DESIGN OF DRIVES WITH OPTIMUM ACCELERATION

Product range MEGAlife

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL

CV3000 Series Smart-Port Single Seated Control Valves with Steam Jacket Model HLS

COTTON VARIETY FIBER CHARACTERISTICS AND YIELD COMPARISON. King Ranch Farms, Kleberg County, 1998

Duct LKR Bends LBR LBXR S-bend LBSR Taper LDR Rect-to-round transition LFR

ORIENTAL MOTOR GENERAL CATALOG. Linear Heads A-227. Features A-228 General Specifications A-232 Product Specifications A-233. Standard AC Motors

CC-410 KIT SERIES INSTRUCTION SHEET

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15

Numerical modeling of multi-component fuel combustion using reactivity adjustment of a chemical reaction mechanism

Prediction of NO X Emissions

OPTIVENT ULTRA VAV damper TECHNICAL DATA

Section 6. Transformers. Table of Contents. General Purpose, Dry Type, 600 Volts and Below. Industrial Control. Instrument, 600 Volt Class

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009

drylin Stainless Steel Lubricant free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery

WAVE SPRINGS SPECIFICATION FORM

POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch

Roller and ball bars for easy and safe die change

Metering pumps LK series

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation

Thermocouple Thermometer omnigrad S- TC 88

Proportional directional valves

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

IGNITION SYSTEM SERVICE MANUAL NUMBER

CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")

VARIFLUX IFS 6000 Electromagnetic Flowmeter

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

CREEK Technical Services, LLC

E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A

Anti-lock Brake System With a Semi-Model Based Controller Using Wheel Pressure Sensors

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS

Solenoid Pilot Operated Directional Control Valve

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION

Solenoid Pilot Operated Directional Control Valve

Power electronic topologies for wind turbines

XVII th World Congress of the International Commission of Agricultural and Biosystems Engineering (CIGR)

KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2

Solenoid Pilot Operated Directional Control Valve

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

DC ARC PHOTOGRAPHY AND MODELLING

Boiler room components 0861EN April 2017 Distribution and regulation units

Spring Return DuraDrive Two-Position Actuator

UPS Pure Sinewave UPS

Compact Design. Geislinger

OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT

THE COANDĂ VTOL-UAV AEROMECHANICAL ASPECTS

A SH Series. SH Series. 2. Ball slide shape

APPLICATION OF MASS MEASUREMENT TECHNIQUE IN CALIBRATION AND CONTROL FOR GAS CYLINDERS

MPC COBRA SERIES. Manually Programmable Cylindrical Lock D

Hand-operated Actuator Type 3273

FORMULATION OF MATHEMATICAL MODEL FOR PRODUCTION TURNOVER OF BIODIESEL PLANT BASED ON DIMENSIONAL ANALYSIS AND MULTIPLE REGRESSION

DEVELOPMENT OF A FAN AIRFLOW STATION FOR AIRFLOW CONTROL IN VAV SYSTEMS

@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10

Create a pe ph diagram for the following solid and aqueous iron species:

THE PHYSICS BEHIND GARAGE DOOR SPRINGS 1. The Physics Behind Garage Door Springs

A LH Series. LH Series. 2. Ball slide shape

CS 7780 FULL FUNCTION DRIVE-UP TERMINAL

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)

Proportional pressure reducing valve type 3WZCDE6 is a

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

drylin stainless steel Lubrication free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery

Redacted for Privacy DIT. JAMES MKNUDSIN

Solenoid Pilot Operated Directional Control Valve

Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B BS EN :2007 +A1:2009

Cooling Efficiency 2017/2018 Cooling Equipment Rebate Application

Transcription:

Appendix A: umped Prmeter Assumption Using Biot Number e dimensionless group known s te Biot number, Bi, is te rtio of conductive nd convective resistnces to et trnsfer [1]. rge vlues of Bi imply tt te limiting et trnsfer mecnism is conduction becuse te internl, or conductive, resistnce is muc greter tn te surfce, or convective, resistnce to et trnsfer. e opposite is true for smll vlues of Bi indicte tt te limiting et trnsfer mecnism is convection. e ltter cse indictes te pplicbility of lumped prmeter nlysis [1]. If constnt temperture in given direction is ssumed, ten Biot number, Bi, less tn 0.1 indictes tt lumped prmeter nlysis results in less tn 5% error [1]. erefore, bsed on te vlue of te Bi in te rdil direction, te vlidity of te constnt rdil temperture ssumption used to form Eqution 11, or te differentil eqution, cn be evluted. Eqution A1 defines Bi in terms of, k, te re of et trnsfer, A (m nd te volume of et trnsfer, V (m 3 [1]. V A Bi (A1 k For cylindricl element, V nd A re defined by Equtions A nd A3, were d (m is te dimeter, nd (m is te lengt of te element [1]. A πd (A V d π (A3 4 ubstituting Equtions A nd A3 into Eqution A1 yields te Biot number for cylindricl element, s sown by Eqution A4. d π Bi 4 d cyl k πd 4 k (A4 ble A1 sows te clcultion of te Bi number for te steel nd luminum rods using expected nd experimentl vlues of nd k from Appendix F. As seen in tese tbles, te Biot number is less tn 0.1 for ll conditions, ing te ssumptions used to derive Eqution 11 vlid. 0

ble A1- Biot Number Clcultion for te teel nd Aluminum Rods for Different Conditions teel Rod (d 0.0131 m Aluminum Rod (d0.019m Conditions (W/(m K k (W/(mK Bi (W/(m K k (W/(mK Bi iterture 10 16.0E-03 10 9 1.4E-04 Air-cooled wit "ermocouple" boundry conditions Wter-cooled wit "ermocouple" boundry conditions 18.8 16 3.8E-03 18.8 186 3.3E-04 9.14 16 1.9E-03 9.14 10.5E-04 Air-cooled wit "End of Rod" boundry conditions 48.3 16 9.9E-03 48.3 11 7.4E-04 Wter-cooled wit "End of Rod" boundry conditions 83.3 16 1.7E-0 83.3 313 8.6E-04 1

Appendix B: Confirmtion of θ olutions is ppendix will sow tt te specific boundry conditions for te ir nd wter exposed metl rods will stisfy te solutions of te energy blnce differentil equtions. e differentil eqution is: d m ese solutions for ir nd wter re sown below: Air Cooled: ( 0 cos[ m( + sin[ m( θ cos[ m] + sin[ m] (B1 (B Wter Cooled: sin[ mx] sin[ m( x ] θ θ (B3 sin[ m] sin[ m] were θ (B4 nd 4 m (B5 kd e boundry conditions, BC#, for te two situtions re te following: Air Cooled: BC1 At x 0 BC At x d k ( Wter Cooled: BC1 w At x 0 BC w At x Air Cooled Metl: ubstitution nd mnipultion of te equtions will sow tt Eqution B is stisfied by te first boundry condition nd is solution of te differentil eqution. Eqution B nd B4 must be equted to prove tt BC1 stisfies Eqution B. ubstitution of BC1 into te bove eqution gives te following: cos[ m( + sin[ m( θ cos[ m] + sin[ m] (B6

cos[ m( 0] + sin[ m( 0] 1 θ 1 x 0 cos[ m] + sin[ m] Eqution B7 sows tt bot sides of te eqution equls one fter te vlues re cnceled. e second boundry condition lso works wit Eqution B. Rerrnging Eqution B6 nd differentition wit respect to x gives: k ( cos[ m( + sin[ m( + cos[ m] + sin[ m] d d ( k( msin[ m( cos[ m( k cos[ m] + sin[ m] msin[ m( cos[ m( k cos[ m] + sin[ m] (B7 (B8 (B8b (B9 were d [sin( x] cos[ x] nd d [cos ( x] sin[ x] ubstituting BC into Eqution B9 gives te following: k( m sin[ m( ] cos[ m( ] k( m sin[0] cos[0] d k k ( k x cos[ m] + sin[ m] cos[ m] + sin[ m] ( ( ( cos[ m] + sin[ m] ( cos[ m] + sin[ m] (B10 were sin[0] 0 nd cos[0] 1 Eqution B10 is te sme s te rerrnged eqution for θ, s sown below. θ x cos[ m( ] + sin[ m( ] 1 ( cos[ m] + sin[ m] cos[ m] + sin[ m] ( cos[ m] + sin[ m] 3

Eqution B stisfies te differentil eqution, Eqution B1, by te following process. Eqution B8 is differentited nd rerrnged. ( d m ( m m cos[ m( + sin[ m( k cos[ m] + sin[ m] cos[ m( + cos[ m] + sin[ m] sin[ m( d + m m ( cos[ m( + d m + m cos[ m] + sin[ m] sin[ m( e vlue inside te lrge brckets is equl to from Eqution B8. us, Eqution B11 simplifies to (B11 d m m ( m (B1 e bove eqution is te rerrnged form of Eqution B1, wic sows tt te solution does stisfy te differentil eqution. Wter Cooled Metl: e sme process of boundry condition substitution into te solutions employed for te ir cooled metl is used to prove tt te wter cooled solution stisfies te boundry conditions. is process of substitution nd rerrngement is sown in te following steps for bot wter boundry conditions: For BC1 w θ sin[ mx] sin[ m( x ] sin[ m] sin[ m] sin[0] sin[ m( ] sin[ m( ] 1 1 x 0 sin[ m] sin[ m] sin[ m] θ were sin[-m] - sin[m] For BC w θ sin[ m] sin[ m( ] x sin[ m] sin[ m] Using te metod from te ir cooled sitution, Eqution B3 stisfies te differentil eqution, Eqution B1. Eqution B3 must be differentited: 4

sin[ mx] sin[ m( x ] ( θ + (B13 sin[ m] sin[ m] 1 [( θ sin[ mx] sin[ m( x ]] + sin[ m] d 1 [( θ m cos[ mx] m cos[ m( x ]] sin[ m] d 1 [( θ m sin[ m] sin[ mx] m sin[ m( x ]] d sin[ mx] sin[ m( x ] m ( θ + sin[ m] sin[ m] m ( e lst substitution ws possible becuse of Eqution B13. e bove eqution is te rerrnged form of Eqution B1, wic sows tt te solution does stisfy te differentil eqution. 5

Appendix C: ermocouple eory A termocouple is used to mesure te totl temperture of system. ese devices work becuse dissimilr metls produce voltge tt is proportionl to te temperture difference t te contct junction, wic is bsed on te terml properties of te conductor metl [4]. Becuse voltge is produced, n externl power source is not necessry, nd te termocouple is n ctive sensor [5]. Furtermore, te current will continue until te tempertures t te ot nd cold junctions re te sme. is cretion of voltge nd current bsed on temperture differences is known s te eebeck Effect. A scemtic of typicl termocouple circuit is sown in Figure A1 [4]. Figure C1 ypicl ermocouple Circuit ree lws necessry for obtining ccurte temperture redings ve been developed bsed on reserc on termocouple circuits. ese re te lws of omogenous circuits, intermedite metl sttes, nd successor or intermedite temperture sttes. e lw of omogenous circuits declres tt circuit of te sme metl cnnot generte current from temperture differences regrdless of te condition nd type of te metl wires. us, if current is detected from circuit, ten te wires must be different metls. e lw of intermedite metls clims tt te sum of te terml voltges is zero if te temperture trougout multi-metl circuit is constnt. Consequently, te ccurcy of termocouple will not be ffected if ny mesuring device of different metl is dded to te circuit nd te tempertures of te device connection junctions re te sme s te circuit tempertures. e lw of te successive temperture llows for te use of known, reference junction temperture to determine n unknown, different junction temperture. If voltge, V 1 is produced for temperture difference of Δ 1 nd noter voltge V is produced for temperture difference of Δ, ten te voltge produced from temperture difference of Δ 1 + Δ is equl to V 1 + V. ome metods used to obtin te constnt reference temperture include using eiter n ice bt or temperture controlled oven [4]. In conclusion, te ppliction of te tree lws of termoelectricity permits te determintion of ccurte temperture mesurements. e mesuring junction is criticl in te mesurement of tempertures. wo suc junctions re te grounded nd ungrounded junctions. Bot junctions re sown in Figure. [6]. 6

Figure C Grounded nd ungrounded termocouple digrm were te grounded termocouple s extr insultion to prevent contct wit te set. For te grounded termocouple, te mesuring junction is normlly in contct wit te conductive, metl set in wic it is enclosed. is contct llows for quick response times nd te protective set protects te junction from corrosive environments to provide long product lifetime. e ungrounded junction is enclosed in, but isolted from conductive set to prevent contct. is loss of contct between te set nd te junction gives slower, but more ccurte response time. is junction lso s long service time under corrosive nd sock conditions [4]. us, te mesuring device ffects mny importnt crcteristics of temperture mesurements including te speed nd ccurcy of te response. 7

Appendix D: ermocouple Positions of Experimentl etup teel Rod, d 1.90 cm, ir-cooled: 1. 1.6..8 3. 5.5 4. 8.0 5. 13.0 6. 0.7 7. 30.6 8. 4.3 9. 44.1 end 46.0 Aluminum Rod, d 1.31 cm, wter-cooled: 19. 1.6 0..5 1. 5.3. 7.8 3. 1.9 4. 0.3 5. 30.6 6. 4.1 7. 44.7 end 53.0 Aluminum Rod, d 1.90 cm, ir-cooled: 10. 1. 11..4 1. 4.9 13. 7.5 14. 1.5 15. 0.15 16. 30.3 17. 41.7 18. 44.8 end 45.8 teel Rod, d 1.31 cm, wter-cooled: 8. 1.3 9. 3.0 30. 5.5 31. 8. 3. 13.3 33. 0.7 34. 30.9 35. 4.4 36. 44.8 end 53.0 e difference in dimeters is ttributed to mesuring errors, nd constnt dimeter of 1.3 cm ws used in ll of te clcultions. 8

Appendix E: Rw Dt All te tempertures re in C, were ir is te ir temperture, wter is te wter temperture, nd stem is te stem temperture. Furtermore, zone represents termocouple. ble E Air Exposed teel Rw Dt Initil tem trted ime Air Wter tem 1 3 4 5 6 7 8 9 14:51:1 3.30 1.70.90 5.70 5.50 4.50 4.10 3.40 3.0 3.0 3.0 3.0 14:51:37 3.0 1.80.90 5.80 5.40 4.60 4.00 3.40 3.0 3.0 3.0 3.30 14:51:38 3.10 1.70 3.00 5.90 5.50 4.50 4.10 3.50 3.10 3.30 3.0 3.0 14:51:39 3.10 1.60.90 5.80 5.50 4.60 4.00 3.50 3.0 3.0 3.0 3.30 14:51:40 3.0 1.70 3.00 5.80 5.50 4.60 4.10 3.40 3.10 3.0 3.0 3.30 14:51:53 3.0 1.70.90 5.90 5.50 4.60 4.00 3.40 3.10 3.0 3.0 3.30 14:5:38 3.30 1.80 107.10 5.80 5.40 4.50 4.10 3.40 3.00 3.10 3.30 3.10 14:5:44 3.30.10 108.0 5.70 5.50 4.60 4.00 3.40 3.00 3.10 3.10 3.30 14:5:5 3.30.10 108.50 5.80 5.40 4.60 4.00 3.50 3.00 3.0 3.0 3.0 14:53:36 3.40.10 11.50 6.40 5.60 4.60 4.00 3.50 3.10 3.0 3.10 3.0 14:53:58 3.50.50 11.40 7.90 6.00 4.50 4.10 3.50 3.10 3.10 3.0 3.0 14:54:07 3.40.50 11.60 8.80 6.30 4.50 4.10 3.40 3.00 3.00 3.0 3.0 14:54:1 3.40.70 113.10 30.50 6.90 4.70 4.0 3.40 3.00 3.0 3.10 3.10 14:54:35 3.30.90 113.50 3.0 7.80 4.70 4.10 3.40 3.00 3.0 3.0 3.0 14:54:51 3.30.80 113.10 34.0 8.90 4.90 4.10 3.40 3.00 3.10 3.0 3.30 14:55:05 3.50.90 113.00 35.90 30.00 5.10 4.10 3.40 3.00 3.00 3.0 3.10 14:55:1 3.50.80 11.70 37.90 31.30 5.40 4.0 3.50 3.00 3.0 3.0 3.0 14:55:34 3.60.70 113.90 39.40 3.30 5.60 4.0 3.40 3.00 3.0 3.30 3.0 14:55:50 3.60.80 113.70 41.30 33.60 6.00 4.0 3.40 3.00 3.0 3.0 3.0 14:56:05 3.60.50 11.80 43.00 35.00 6.40 4.30 3.50 3.00 3.0 3.0 3.0 14:56:1 3.60.50 113.10 44.60 36.30 6.90 4.40 3.40 3.10 3.0 3.0 3.0 14:56:34 3.70.40 113.60 45.90 37.30 7.30 4.50 3.40 3.10 3.10 3.0 3.0 14:56:50 3.60.30 113.40 47.40 38.40 7.80 4.90 3.50 3.00 3.0 3.0 3.0 14:57:05 3.60.30 113.70 48.70 39.60 8.30 4.90 3.50 3.10 3.10 3.0 3.0 14:57:0 3.60.10 113.10 49.90 40.60 8.80 5.0 3.60 3.00 3.0 3.0 3.10 14:57:35 3.60.0 11.0 51.00 41.60 9.30 5.30 3.40 3.10 3.10 3.30 3.10 14:57:51 3.70.00 113.30 5.0 4.60 9.80 5.50 3.50 3.00 3.00 3.0 3.0 14:58:05 3.70 1.90 113.30 53.0 43.60 30.30 5.60 3.60 3.00 3.10 3.0 3.0 14:58:0 3.70 1.90 113.60 54.00 44.40 30.80 5.90 3.60 3.00 3.0 3.30 3.30 14:58:35 3.60 1.70 113.0 55.10 45.0 31.40 6.10 3.60 3.00 3.10 3.10 3.0 14:58:50 3.70 1.70 113.30 55.80 46.00 31.90 6.40 3.70 3.10 3.0 3.10 3.0 14:59:05 3.70 1.70 113.30 56.40 46.80 3.50 6.70 3.70 3.10 3.10 3.0 3.10 14:59:0 3.70 1.70 113.30 57.0 47.40 3.90 7.00 3.70 3.10 3.10 3.0 3.0 14:59:35 3.60 1.50 113.60 57.90 48.00 33.30 7.0 3.70 3.00 3.0 3.0 3.30 14:59:50 3.60 1.40 113.30 58.50 48.70 33.90 7.50 3.70 3.10 3.0 3.0 3.0 15:00:05 3.60 1.30 11.70 59.0 49.30 34.30 7.60 3.80 3.10 3.10 3.0 3.30 15:00:0 3.60 1.30 113.50 59.80 49.70 34.70 7.90 4.00 3.10 3.10 3.10 3.40 15:00:35 3.60 1.10 113.00 60.30 50.40 35.10 8.0 3.90 3.10 3.10 3.0 3.30 15:00:51 3.80 1.00 113.80 60.80 51.00 35.70 8.40 4.00 3.10 3.10 3.0 3.0 15:01:05 3.90 0.90 113.80 61.0 51.50 36.00 8.70 4.10 3.10 3.10 3.30 3.0 15:01:0 3.90 0.90 114.00 61.50 51.80 36.30 8.90 4.10 3.0 3.0 3.30 3.30 9

ime Air Wter tem 1 3 4 5 6 7 8 9 15:01:35 4.00 1.00 113.80 6.00 5.30 36.60 9.10 4.0 3.10 3.10 3.30 3.30 15:01:50 4.00 1.00 113.50 6.30 5.70 37.10 9.40 4.30 3.0 3.0 3.0 3.0 15:0:05 3.90 1.00 113.60 6.80 5.90 37.40 9.60 4.30 3.10 3.0 3.10 3.30 15:0:0 4.00 1.00 113.90 63.10 53.30 37.70 9.60 4.40 3.0 3.10 3.30 3.30 15:0:35 4.00 1.00 113.50 63.50 53.80 38.10 30.10 4.60 3.10 3.0 3.0 3.30 15:0:50 3.90 1.00 116.60 63.70 54.10 38.0 30.40 4.50 3.10 3.0 3.30 3.30 15:03:05 4.00 1.0 115.0 64.00 54.30 38.60 30.50 4.70 3.10 3.10 3.0 3.30 15:03:0 4.00 1.10 115.00 64.30 54.60 38.80 30.70 4.70 3.0 3.30 3.0 3.30 15:03:35 4.10 1.10 115.00 64.70 55.00 39.0 31.10 4.80 3.10 3.0 3.30 3.0 15:03:50 4.10 1.0 114.80 64.90 55.10 39.40 31.10 4.90 3.0 3.0 3.0 3.30 15:04:05 4.10 1.0 113.90 65.40 55.50 39.60 31.30 4.90 3.10 3.10 3.30 3.30 15:04:0 4.10 1.0 113.70 65.70 55.90 40.00 31.50 4.90 3.10 3.10 3.30 3.40 15:04:35 4.0 1.0 113.80 65.70 56.30 40.30 31.90 4.90 3.0 3.0 3.0 3.0 15:04:50 4.00 1.10 114.40 66.0 56.50 40.50 31.90 5.00 3.0 3.30 3.30 3.40 15:05:05 4.00 1.0 114.50 66.10 56.60 40.70 3.0 5.0 3.0 3.30 3.30 3.0 15:05:0 4.10 1.00 113.50 66.40 56.90 41.00 3.30 5.0 3.0 3.10 3.30 3.40 15:05:35 4.0 1.10 113.60 66.60 57.10 41.30 3.70 5.30 3.0 3.0 3.30 3.0 15:05:50 4.0 1.10 114.00 66.70 57.10 41.30 3.70 5.60 3.0 3.0 3.40 3.0 15:06:05 4.10 1.10 114.10 66.70 57.30 41.50 3.90 5.50 3.30 3.0 3.30 3.30 15:06:0 4.10 1.10 113.40 66.80 57.50 41.60 33.00 5.60 3.0 3.0 3.0 3.30 15:06:35 4.00 1.10 113.60 66.80 57.50 41.70 33.0 5.70 3.30 3.30 3.40 3.30 15:06:50 4.10 1.00 113.90 67.00 57.70 41.90 33.30 5.80 3.30 3.30 3.30 3.0 15:07:05 4.00 1.00 114.00 67.10 57.80 4.10 33.50 5.80 3.40 3.0 3.30 3.0 15:07:0 4.10 0.80 113.70 67.50 58.00 4.30 33.60 5.90 3.30 3.0 3.30 3.30 15:07:35 3.90 1.00 113.40 67.50 58.0 4.50 33.70 6.10 3.30 3.30 3.0 3.30 15:07:50 4.00 0.90 113.90 67.50 58.30 4.70 34.00 6.10 3.40 3.0 3.40 3.40 15:08:05 4.00 0.80 113.40 67.70 58.30 4.80 34.10 6.10 3.40 3.30 3.0 3.30 15:08:0 4.00 0.80 114.10 67.60 58.40 4.80 34.0 6.30 3.40 3.30 3.30 3.30 15:08:35 4.10 0.90 113.70 67.70 58.40 4.90 34.30 6.0 3.50 3.0 3.30 3.40 15:08:50 4.10 0.70 113.70 67.80 58.50 43.10 34.40 6.30 3.40 3.30 3.30 3.30 15:09:05 4.10 0.60 113.70 67.80 58.70 43.0 34.50 6.50 3.50 3.30 3.40 3.30 15:09:0 3.90 0.60 113.80 68.10 58.80 43.30 34.60 6.60 3.40 3.30 3.30 3.40 15:09:35 4.00 0.60 113.80 68.00 58.90 43.40 34.70 6.70 3.50 3.30 3.30 3.30 15:09:50 4.10 0.50 114.10 67.90 58.90 43.50 34.90 6.70 3.50 3.0 3.40 3.30 15:10:05 4.10 0.60 113.60 68.0 59.00 43.60 35.00 6.70 3.50 3.40 3.30 3.40 15:10:0 4.00 0.40 11.30 68.0 59.10 43.80 35.00 6.90 3.50 3.30 3.30 3.40 15:10:35 4.00 0.50 113.30 68.0 59.0 43.80 35.30 6.90 3.40 3.40 3.30 3.40 15:10:50 4.00 0.60 113.60 68.50 59.30 44.00 35.30 6.90 3.40 3.40 3.40 3.30 15:11:05 4.10 0.40 113.70 68.50 59.40 43.90 35.30 7.00 3.50 3.0 3.30 3.30 15:11:0 4.00 0.50 113.30 68.50 59.30 44.00 35.30 7.10 3.50 3.0 3.40 3.30 15:11:35 4.00 0.60 113.90 68.50 59.40 44.10 35.50 7.10 3.50 3.40 3.40 3.40 15:11:50 4.0 0.70 113.90 68.40 59.50 44.0 35.60 7.0 3.70 3.40 3.30 3.30 15:1:05 4.00 0.70 113.50 68.70 59.60 44.0 35.80 7.0 3.50 3.30 3.30 3.30 15:1:0 4.10 0.70 113.00 68.50 59.70 44.30 35.70 7.30 3.70 3.30 3.30 3.40 15:1:35 4.00 0.70 113.40 68.70 59.60 44.30 35.70 7.0 3.70 3.40 3.30 3.30 15:1:50 3.90 0.70 113.10 68.90 59.80 44.70 36.00 7.40 3.60 3.30 3.30 3.40 15:13:05 4.10 0.70 113.30 68.80 59.90 44.50 36.00 7.50 3.70 3.40 3.30 3.40 15:13:0 3.90 0.70 113.40 69.00 60.00 44.60 36.00 7.50 3.60 3.30 3.40 3.40 15:13:35 4.10 0.60 113.90 68.80 60.00 44.80 36.10 7.60 3.80 3.40 3.30 3.30 30

tedy tte ime Air Wter tem 1 3 4 5 6 7 8 9 15:13:51 4.10 0.80 114.00 68.90 60.10 44.70 36.0 7.50 3.70 3.30 3.0 3.30 15:14:05 4.00 0.80 113.80 69.00 60.00 44.80 36.0 7.70 3.70 3.30 3.40 3.30 15:14:0 3.90 0.90 11.80 69.00 60.10 44.90 36.40 7.80 3.70 3.30 3.40 3.40 15:14:35 4.10 0.80 113.60 69.10 60.0 44.90 36.40 7.70 3.80 3.30 3.30 3.40 15:14:50 4.00 0.80 113.0 69.10 60.0 44.90 36.40 7.80 3.80 3.40 3.40 3.30 15:15:05 4.10 0.80 113.40 69.10 60.30 45.00 36.50 7.90 3.90 3.30 3.40 3.40 15:15:1 4.10 0.90 113.90 69.10 60.0 45.00 36.60 7.90 3.80 3.40 3.40 3.40 15:15:36 4.10 0.90 113.90 69.0 60.0 45.00 36.50 8.00 3.90 3.40 3.40 3.40 15:15:50 4.00 0.80 11.80 69.10 60.0 45.00 36.50 7.90 3.90 3.0 3.40 3.40 15:16:05 4.00 0.90 11.90 69.0 60.30 45.0 36.60 8.10 3.80 3.40 3.40 3.30 15:16:1 4.10 1.00 113.10 69.30 60.40 45.30 36.70 8.00 3.90 3.40 3.40 3.40 15:16:35 4.10 0.90 11.30 69.50 60.60 45.40 36.80 8.0 3.90 3.40 3.30 3.30 15:16:50 4.10 0.80 11.80 69.50 60.70 45.40 36.90 8.10 3.90 3.40 3.40 3.40 15:17:05 4.00 1.00 113.80 69.50 60.50 45.50 36.90 8.0 3.90 3.40 3.30 3.30 15:17:0 4.0 0.90 114.40 69.70 60.60 45.60 37.10 8.0 3.90 3.40 3.30 3.30 15:17:35 4.10 0.90 114.40 69.60 60.70 45.50 37.00 8.30 3.90 3.40 3.40 3.40 15:17:50 4.0 0.80 114.90 69.50 60.60 45.40 37.10 8.30 3.90 3.50 3.50 3.30 15:18:05 4.0 0.80 113.50 69.40 60.60 45.50 37.00 8.30 4.00 3.40 3.40 3.30 15:18:0 4.10 0.70 114.30 69.60 60.60 45.50 37.10 8.30 4.00 3.40 3.50 3.40 15:0:11 4.0 0.90 113.90 69.90 61.00 45.90 37.40 8.70 4.0 3.50 3.40 3.40 15:0:35 4.00 0.80 113.80 69.70 61.00 46.00 37.50 8.70 4.10 3.50 3.30 3.30 15:1:35 4.0 0.80 113.80 69.80 61.10 46.10 37.60 8.80 4.0 3.50 3.40 3.30 15::50 4.10 0.80 113.60 69.90 61.0 46.10 37.70 8.90 4.30 3.50 3.50 3.50 15:3:50 4.00 1.00 113.90 69.80 61.00 46.30 37.80 9.00 4.40 3.60 3.50 3.50 15:4:51 4.10 0.90 113.10 69.90 61.10 46.30 37.80 8.90 4.50 3.60 3.50 3.50 15:5:50 4.10 0.90 113.80 70.00 61.0 46.30 37.90 9.10 4.40 3.50 3.40 3.50 15:6:50 4.10 0.90 113.30 70.00 61.30 46.50 37.90 9.0 4.50 3.60 3.50 3.40 15:7:50 4.40 0.80 113.00 70.10 61.0 46.40 38.00 9.30 4.50 3.50 3.50 3.50 ble E3 Air-Exposed Aluminum - Alredy t tedy tte ime Air Wter tem 10 11 1 13 14 15 16 17 18 15:38:05 4.30 0.70 11.90 88.00 84.40 75.30 69.00 58.50 47.60 40.10 36.0 35.30 15:39:05 4.60 0.90 113.80 88.00 84.30 75.0 68.80 58.30 47.50 40.10 36.10 35.0 15:40:06 4.50 0.90 113.00 87.90 84.40 75.10 68.90 58.70 47.70 40.0 36.0 35.10 15:41:05 4.40 0.70 113.60 87.90 84.0 74.90 68.70 58.40 47.50 40.10 36.10 35.00 15:4:05 4.50 0.90 11.40 87.80 84.10 75.10 68.90 58.50 47.60 40.10 36.10 35.0 15:43:10 4.50 0.80 113.30 87.90 84.30 75.10 69.00 58.60 47.70 40.10 36.00 35.0 15:44:14 4.60 1.00 113.70 88.00 84.30 75.0 68.90 58.60 47.80 40.10 36.10 35.30 ble E4 Wter-Exposed Aluminum Initil Vlues ime Air Wter tem 19 0 1 15:50:18 4.80 0.90 113.80 86.40 81.90 75.90 71.0 59.30 48.40 39.30 33.40 3.00 15:50:36 4.80 1.00 113.40 86.70 8.00 76.00 71.40 59.40 48.50 39.40 33.50 3.10 15:53:45 4.90 1.00 113.70 87.0 8.40 76.70 71.50 59.60 48.60 39.40 33.50 3.00 15:54:1 5.00 4.40 113.50 87.10 8.50 76.50 71.40 59.40 48.60 39.40 33.30 31.0 3 4 5 6 7 31

Wter On tedy tte ime Air Wter tem 19 0 1 15:55:1 4.50 3.0 114.00 86.70 81.90 76.0 71.40 59.0 48.30 38.80 8.90 5.30 15:56:1 4.0.90 11.90 86.80 8.10 76.30 71.60 59.40 48.10 37.40 5.30 1.70 15:57:1 4.00.90 113.00 87.30 8.70 77.00 7.10 59.80 48.10 36.40.70 19.10 15:58:0 4.00.90 113.70 86.90 8.30 76.60 71.70 59.10 47.30 35.10 0.90 17.50 15:59:0 3.90.80 113.80 86.90 8.30 76.50 71.50 59.00 46.80 34.0 19.70 16.50 16:00:0 3.80.90 113.00 86.70 81.90 76.00 71.30 58.60 46.0 33.0 18.90 15.80 16:01:1 3.70.90 113.90 86.50 81.80 76.00 71.00 58.00 45.70 3.50 18.30 15.30 16:0:1 3.40.80 11.90 86.40 81.70 75.70 70.80 57.90 45.10 3.0 17.90 14.90 16:03:1 3.80.80 113.50 87.00 8.10 76.00 70.90 57.80 44.90 31.70 17.40 14.60 16:04:1 3.50.90 113.00 86.60 81.80 75.90 70.60 57.50 44.50 31.40 17.30 14.40 16:05:1 3.60.90 115.40 86.50 81.60 75.30 70.40 57.40 44.40 31.10 17.10 14.0 16:06:1 3.40.80 114.60 86.90 81.90 75.90 70.10 56.70 44.10 30.80 16.90 14.0 16:07:4 3.60.80 114.60 86.70 81.90 75.70 70.30 57.10 44.00 30.50 16.90 14.00 16:08: 3.50 3.00 113.70 86.40 8.00 75.90 70.60 57.40 44.10 30.70 16.80 14.10 16:09:0 3.60.80 113.00 86.60 81.70 75.60 70.0 57.00 43.90 30.50 16.70 14.00 16:10:3 3.60.90 113.60 86.0 81.40 75.30 70.00 56.70 43.80 30.40 16.80 14.00 16:11:3 3.90.90 113.60 86.40 81.70 75.70 70.30 57.30 43.90 30.50 16.60 14.00 3 4 5 6 7 ime Air Wter tem ble E5 Wter-Exposed teel - Alredy t tedy tte 8 9 30 16:18:41 3.50.70 113.30 57.60 55.60 43.90 36.10 8.0 4.50.80 17.50 13.70 16:19:41 3.0.80 113.0 57.50 55.50 43.90 36.00 8.10 4.40.70 17.50 13.60 16:0:41 3.0.80 113.10 57.40 55.40 44.00 36.00 8.10 4.30.70 17.30 13.60 16:1:43 3.40.80 113.50 57.30 55.50 43.80 35.90 8.10 4.30.70 17.30 13.60 16::43 3.0.90 113.70 57.30 55.0 43.80 35.80 8.0 4.40.70 17.0 13.50 16:3:8 3.30.80 113.0 57.50 55.30 43.80 35.90 8.0 4.40.70 17.10 13.50 31 3 33 34 35 36 3

Appendix F: Representtive Clcultions for te Air-Exposed teel Becuse te equtions were pplied in te sme mnner, te only clcultions sown re for te irexposed steel. ese clcultions will be ssumed to be representtive of te oter clcultions. e djusted distnce of te stem ws clculted by subtrcting te distnce of te first termocouple from ll of te oter distnces. is sifted te origin to te position of te first termocouple. For te ir-exposed mesurements, te stedy stte vlues were used in Equtions 14, 18, nd 1 to obtin te vlues for θ s function of for te steel nd s function of k Al for te luminum. P π d 4 (14 m ka d kd kπ 4 θ (18 s cos θ cos [ m( x ] + sin[ m( x ] [ m] + sin[ m] (1 For te wter exposed sets of dt, Eqution 17 replced Eqution 1, wile te oters remined te sme. ( sin[mx] sin[m x ] θ θ (17 sin[m] sin[m] ble F1 Clcultions for Air-Exposed teel θ Mesurement (- Distnce from tem (m Adj Distnce from tem (m Averge ('C tndrd Devition ( C Clculted (Eqution 1 Experimentl (Eqution 18 Difference Air 0.46 0.444 4.13 1.4E-01 - - - Wter - - 0.87 7.066E-0 - - - tem 0-0.016 113.58 3.57E-01 - - - 1 0.016 0 69.90 1.5E-01 1.000E+00 1.000E+00 6.419E-15 0.08 0.01 61.1 1.093E-01 7.959E-01 8.08E-01 1.511E-04 3 0.055 0.039 46.1 1.965E-01 4.76E-01 4.84E-01 3.805E-05 4 0.08 0.064 37.73.000E-01.960E-01.97E-01 1.345E-06 5 0.13 0.114 8.96.18E-01 1.144E-01 1.054E-01 8.074E-05 6 0.07 0.191 4.34 1.509E-01.643E-0 4.61E-03 4.76E-04 7 0.306 0.9 3.53 5.005E-0 4.031E-03-1.311E-0.938E-04 8 0.43 0.407 3.44 7.66E-0 5.81E-04-1.505E-0.48E-04 9 0.441 0.45 3.43 8.659E-0 4.406E-04-1.530E-0.476E-04 Wit k steel 16 W/(m K for ll mesurements, nd using solver to minimize te squre distnce, te vlues of nd k could be found using difference reference tempertures nd distnces. For exmple, using te tempertures for te 33

first nd lst termocouple of te ir-exposed steel s te temperture of te stem nd rod end respectively, or using te termocouple metod, gve 18.8 W/(m K. Becuse ws ssumed to be independent of te mteril, tis ws lso used for te ir-exposed luminum. Performing te sme set of clcultions on te ir-cooled luminum mesurements, but solving for k Al sowed tt k Al 186.1 W/(m K. e end rod metod of clcultion used te stem temperture for to give 18.8 W/(m K nd k Al 186.1 W/(m K. e sme procedure ws repeted for te wter cooled dt, except Eqution 17 ws used to find te Clculted θ insted of Eqution 1. Furtermore, for te end rod clcultion metod, te wter temperture ws used s t n estimted position,, to find θ becuse of te boundry condition of Eqution 16. For tis metod, te stem temperture ws used s. Using te termocouple metod, te first nd lst termocouple tempertures were te initil nd finl tempertures in te clcultion of te experimentl θ nd θ. All of te results re summrized in ble F. ble F ummry of Clcultions of Coefficiencts itution Clcultion Metod First nd st ermocouple Ends of Rods 1 (W/m K k 1 (W/(m K (W/m K k (W/(m K Air Exposed 18.8 186 48.3 11 Wter Exposed 9.14 10 83.3 313 Percent Difference 69.1% 43.1% -53.% -38.9% 34

Appendix G: Error Anlysis e uncertinties in te mesurements re sown in ble G1. e lengt uncertinty ws estimted by looking t te divisions, or tick mrks, on te mesuring device. e temperture uncertinty ws obtined from te stndrd devition clcultion in Appendix F. e dimeter uncertinty ws estimted from te number of decimls on te clipers. e conductivity of steel ws obtined from tble [], wic sowed little devition of te et conductivity constnt wit respect to temperture. ble G1 Uncertinties in Mesurements Mesurement (Units Vlue Uncertinty emperture ( C Vried Vried: ~ 0.1 engt (m Vried E-3 Dimeter (m ~0.013 ~0 teel erml Conductivity (W/m s 16 ~ 0 θ (None Clculted Vried ~ 0 e eqution for dimensionless temperture, θ, is Differentiting in terms of, s nd : θ θ θ ( ( s Finding te totl error: θ 1 ( + ( ` θ θ θ ( θ + + (G1 s e dt for te ir-exposed steel ws substituted into te bove equtions. is is sown in ble G. ble G Error Clcultions of Air Exposed teel Mesurement (- Distnce from tem (m Adj Distnce from tem (m Averge ( C tndrd Devition ( C dθ/d dθ/d dθ/d otl dθ Air 0.46 0.444 4.13 1.4E-01 0 0 0 0 Wter - - 0.87 7.066E-0 0 0 0 0 tem 0-0.016 113.58 3.57E-01 0 0 0 0 1 0.016 0 69.90 1.5E-01-6.684E-04 -.018E-03 1.370E-03.58E-03 0.08 0.01 61.1 1.093E-01-8.07E-04-1.631E-03 1.E-03.190E-03 3 0.055 0.039 46.1 1.965E-01-1.031E-03-9.733E-04.197E-03.615E-03 4 0.08 0.064 37.73.000E-01-1.161E-03-5.996E-04.36E-03.590E-03 35

Mesurement (- Distnce from tem (m Adj Distnce from tem (m Averge ( C tndrd Devition ( C dθ/d dθ/d dθ/d otl dθ 5 0.13 0.114 8.96.18E-01-1.95E-03 -.16E-04.379E-03.717E-03 6 0.07 0.191 4.34 1.509E-01-1.366E-03-9.303E-06 1.687E-03.171E-03 7 0.306 0.9 3.53 5.005E-0-1.378E-03.645E-05 5.596E-04 1.487E-03 8 0.43 0.407 3.44 7.66E-0-1.379E-03 3.037E-05 8.13E-04 1.601E-03 9 0.441 0.45 3.43 8.659E-0-1.379E-03 3.086E-05 9.681E-04 1.686E-03 is ws te error used for ll of te θ results becuse it ws ssumed tt it wouldn t vry significntly between te different situtions. Also, te ir-exposed steel tempertures fluctuted between te mximum nd minimum tempertures observed. 36