onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts in isolation): t 25 2.8 max ll contacts simultaneously: t 25 2.0 max Working Voltage (at sea level 1006 mbar): 450V d.c. or a.c. peak (at altitudude 44mbar) 250V d.c. or a.c. peak Proof voltage (at sea level 1013 mbar): 600V d.c. or a.c. peak ontact resistance (initial): 20 mω max ontact resistance (after conditioning): 25 mω max Insulation resistance (initial): 10 GΩ min at 500V d.c. Insulation resistance (after conditioning): >1 GΩ min at 500V d.c. Mechanical Durability: 1000 operations Mating forces (per contact pair): Insertion force: 2.8N max Withdrawal force: 0.2N min ontact retention in moulding: 6N min Environmental Environmental classification: 65/150/96 hours at 95% RH Operational temperature: 65º to 150º * Vibration sensitivity: 10Hz to 2000Hz, 1.5mm, 198mm/s 2 (20G). duration 2h * ump severity: 390m/s 2 (40G), 4000± 10 bumps * Shock severity: 981m/s 2 (100G) for 6ms * cceleration severity: 490m/s 2 (50G) * Tested with latched connectors ll preferred sizes of this range are held in stock. heck www.harwin.com for availability. mating PROFiles FEMLE MLE VERTIL P TIL VERTIL SMT LE VERTIL P TIL 7.25 7.35 7.70 VERTIL SMT 7.35 7.45 7.80 LE 8.85 8.90 9.30 ll dimensions in mm Patent Pending - UK 1205109.0 4
onnectors Female P & surface mount 4-finger eryllium opper contact. Positive keyway polarisation features. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. P surfae mount 5.25 5.25 Ø 0.40 0.15 max Ø 0.40 Ø 0.55 min Recommended P oard Pattern SERIES ODE LULTION + 3.8 0.625 x (Total No. of ontacts - 2) + 1.8 G125 F XX XX 05 L0 X 1.20 6.20 0.70 Recommended P oard Pattern PKGING R Tape & Reeled P Loose V1 V2 S1 3mm P 4.5mm P Surface Mount TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 ll dimensions in mm Patent Pending - UK 1205109.0 5
onnectors male P & surface mount Secure fixing to the P via hold-down tabs (SMT) or retention barbs for through hole. Easy-to-release latches require no tooling. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. P surfae mount Ø 0.40 Latch 1.90 1.00 Latch + 2.50 Recommended P oard Pattern Ø0.55 Oval holes required for latches Ø 0.40 Ø 0.40 LULTION + 3.8 0.625 x (Total No. of ontacts - 2) + 4.85 0.15 max0.15 max End pads required for latches 6.20 1.20 + 0.60 + 1.05-1.95 1.85 0.70 Recommended P oard Pattern SERIES ODE V1 3mm P V2 4.5mm P S1 Surface Mount TOTL NO. OF ONTTS 06, 10, 12, 16, 20, 26, 34, 50 G125 M XX XX 05 LX X PKGING R Tape & Reeled P Loose LTH L0 No Latch L1 Latch for 1.6mm P L2 Latch for 2.4 mm P L3 Surface Mount Latch ll dimensions in mm Patent Pending - UK 1205109.0 6
onnectors able onnectors 4-finger eryllium opper contact on a female connector. Features potting wall for extra security. No. 1 position identified on moulding. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. Female LULTION + 3.8 male LULTION + 3.8 0.625 x (Total No. of ontacts - 2) 0.625 x (Total No. of ontacts - 2) + 1.8 + 4.85 5.70 8.36 6.48 OnTaTs WiRe stripping Des Female Male 4.45 5.20 26 WG - Ø 0.80 max. 28-32 WG - Ø 0.72 max. 1.50-1.75 nominal. TOOls Recommended rimp Tool Z125-900 Positioner Z125-901 ontact Insertion/Removal Tool Z125-902 See page 11 instruction sheets available at www.harwin.com/downloads/instructions G125 XXX XX XX XX SERIES ODE 001 Female 26 WG crimp contact 002 Female 28-32 WG crimp contact 101 Male 26 WG crimp contact 102 Male 28-32 WG crimp contact 204 Female Housing 304 Male Housing LTHES LNK ontacts L0 No Latches (Housing) L4 Latches (Male Housing) 96 Housing TOTL NO. OF ONTTS 00 ontacts 06, 10, 12, 16, 20, 26, 34, 50 Housing ll dimensions in mm Patent Pending - UK 1205109.0 7
onnectors able onnectors - individual ontacts 4-finger eryllium opper contact on a female connector. Ready for assembling to housings on page 7. rimp barrel meets all crimp guidelines and standards. 2 current capacity, resists high vibration and shock. Withstands extremes of temperature: -65 to +150. Female single ended Female - Female able Length able Length male single ended male - male able Length able Length male - Female TOOls able Length ontact Insertion/Removal Tool Z125-902 See page 11 instruction sheets available at www.harwin.com/downloads/instructions SERIES ODE GENDER - FIRST END M Male F Female LE SIZE W1 26 WG W2 28 WG W3 30 WG W4 32 WG G125 X WX XXXX X 94 LE OLOUR 94 White TERMINTION - SEOND END L Loose cut end F Female M Male LE LENGTH 0150 150mm 0300 300mm (double-ended) 0450 450mm (single-ended) ll dimensions in mm Patent Pending - UK 1205109.0 8