262 Series IZN0 / Nozzle type (Nozzle type) Series IZN0 RoHS Slim and compact: 6mm thickness. Nozzle selectable: Energy saving, large flow types and female threads for piping. ±0V ion balance: High frequency AC ion generation method. Contaminated electrode needle detection function. Electrode needle (cartridge) easy replacement. Mounting options: Direct and bracket mounting. How to Order High frequency AC nozzle type IZN0 0 P 06 Nozzle type Symbol 0 02 Type Energy saving static electricity elimination nozzle High flow rate nozzle Female threads for piping Note) Rc/8 Note) Used with a fitting and a tube on the end Port size 06 ø6: Metric size 07 ø6.35 (/4): Inch size 6 ø6: Metric size (Elbow) 7 ø6.35 (/4): Inch size (Elbow) Output specification NPN output P PNP output Product Recommendation Related Products Stocked items for fast delivery IZN0-0P06 IZN0-02P06 IZN0-P06 Series IZD - Electrostatic Sensor - www.smc.eu Series IZE - Electrostatic Monitor - www.smc.eu Series IZH - Handheld Electrostatic Meter - www.smc.eu Series AF - Main Line Filter - page 082 Series AM - Mist Separator - page 7 Series AR - Air Regulator - page 084 Series KA - Antistatic One-touch Fittings - www.smc.eu Series TAS/TAU - Antistatic Tubing - www.smc.eu Accessories Bracket IZN0-B IZN0-B2 DIN rail mounting bracket IZN0-B3 Fixed mounting Pivot mounting Pivoting bracket Manifold Power supply cable (3 m,0 m) IZN0-CP IZN0-CPZ AC adapter (00 to 240 VAC) IZN0-FP-X96EU Electrode needle cleaning kit IZS30-M2 Single unit
/ Nozzle type Series IZN0 263 Specifications Ioniser model Ion generation method Method of applying voltage Note ) Discharge output IZN0- (NPN specification) Corona discharge type High frequency AC type 2,500 V IZN0- P (PNP specification) Note 2) Ion balance High flow rate nozzle Ozone generation Note 3) Air purge Power supply voltage Current consumption Discharge stop signal Input signal Reset signal External switch signal Discharge signal Output signal Error signal Maintenance signal Effective static electricity elimination distance Ambient and fluid temperature Ambient humidity Material Vibration resistance Shock resistance Weight Standards Energy saving static electricity elimination nozzle Fluid Operating pressure Note 4) Connecting tube size Within ±0 V Within ±5 V 0.03 ppm (0.05 ppm for energy saving static electricity elimination nozzle) Air (Clean dry air) 0.05 MPa to 0.7 MPa ø6 / ø/4 inch 24 VDC ±0% 80 ma Connected to GND (ON voltage: 0.6 V or less) Current consumption: 5 ma or less Max. load current: 40 ma Residual voltage: V or less (load current at 40 ma) Max. applied voltage: 28 VDC mm to 500 mm Connected to +24 V (ON voltage: Between +9 V and power supply voltage) Current consumption: 5 ma or less 0 to 55ºC 35 to 65%RH Housing: ABS, Stainless steel Nozzle: Stainless steel Electrode needle: Tungsten Durability: 50 Hz, Amplitude: mm, XYZ each 2 hours 0 G g CE marking, UL (CSA) compliant Max. load current: 40 ma Residual voltage: V or less (load current at 40 ma) Note ) Measured with a probe of 000 MΩ and 5 pf. Note 2) Measured with a distance of 00 mm between the charged object and the ioniser at an air purge pressure of 0.3 MPa. For the static electricity elimination time, refer to technical data. Note 3) Value above background level, measured with a distance of 300 mm from the front of the nozzle at an air purge pressure of 0.3 MPa. Note 4) Static electricity cannot be eliminated without an air purge. Also, failure of the air purge can increase internal ozone condensation, adversely affecting the ioniser and peripheral equipment. Be sure to perform an air purge while energising the ioniser. For more product options and details see our specific catalogues or on-line information.
6 264 Series IZN0 / Nozzle type 06 Energy saving static electricity elimination nozzle / IZN0-0 07 06 High flow rate nozzle / IZN0-02 07 32 26 2 x M3 depth 0 6 6 6 6 5 (0) 00 5 ø3.4 A 46 8 2 A-A Model 0 IZN0-02 06 [mm] 0 IZN0-02 07 [inch] [mm] A 3.5 7 Elbow for piping port / IZN0-6 7 D C B 8.5 5 M3 depth 4 (Tap for ground wiring) 7 25 40 93.6 A A 80º IZN0- Female threads for piping (Rc/8) ø0 Model IZN0-6 [mm] IZN0-7 [inch] B 22 24.5 C 6 8.5 [mm] D.5 2 3 Rc/8 Width across flats 4
/ Nozzle type Series IZN0 265 L-bracket / IZN0-B 33 2 x 3.4 Internal mounting.5 30º 30º 33.5 6 6 7 26 52 46 44 8 x ø3.4 2 x Hexagon socket head cap screw M3 (Accessory) 40 5 26 2 3 (Mounting angle adjustable range) 40 2 x 3.4 2 x R0 ø3.4 25 40 5 50 2 x M3 7.5 7 Pivot mounting Internal mounting (90) 30º (Mounting angle adjustable range) Pivoting bracket / IZN0-B2 º 3.4 28 56 9 64 24 4 40 59 ø3.4 (Accessory) 4 2 x Hexagon socket head cap screw M3 90º (Mounting angle adjustablerange) 9.5 8 For more product options and details see our specific catalogues or on-line information.
266 Series IZN0 / Nozzle type DIN rail mounting bracket / IZN0-B3 33 2 x 3.4 Internal mounting.5 30º 30º 33.5 70 70 7 26 55 44 2 x Hexagon socket head cap screw M3 (Accessory) 8 x ø3.4 40 5 26 2 3 (7.5) 9 (Mounting angle adjustable range) 40º 50 7 Pivot mounting Internal mounting (99) 6 30º (Mounting angle adjustable range) Manifold mounting parts set L2 This set consists of a hexagon socket head cap screw, a spacer and a hexagon nut. Note) The ioniser, L-bracket and DIN rail mounting bracket need to be prepared separately. How to Order 9.5 L 7 (Mounting pitch) (Order it separately.) Bracket (Order it separately.) IZN0 ES 2 Mounting pitch Symbol Pitch ES 7 mm Mounting stations Symbol Stations 2 2 3 3 4 4 Hexagon nut IZN0-ES2 IZN0-ES3 IZN0-ES4 L 37 54 7 L2 40 60 75 Number of spacers 4 6 8 Hexagon socket head cap screw Spacer (5 mm) Prepare two brackets and ionizer separately.
/ Bar Type Series IZS3 267 Series IZS3 3 types of sensors available: - Auto-balance sensor (high precision type); Monitoring of the ion balance condition. - Auto-balance sensor (body mounting type); Monitoring of the ion balance condition. - Feedback sensor: Rapid remoral of static electricity. Electrode cartridge variations: - Cartridge with high efficiency nozzle: Improved discharge time with low air consumption. - Cartridge with low maintenance. Contamination of the needle reduced. 3 types of electrode needle materials: - Tungsten: Ion balance 30V. - Monocrystal silicon: Ion balance 30V. - Stainless steel: Ion balance 00V. Switch over frequency: 60Hz, applicable to fast moving workpieces. Effective remoral of static electricity at short distances. Indicator and safety functions. Continious ion emission of a desired polarity in DC mode. How to Order IZS3 780 P Symbol 300 380 6 780 Bar length Bar length 300 mm 380 mm 6 mm 780 mm 00 260 500 900 2300 00 mm 260 mm 500 mm 900 mm 2300 mm Bar type Output NPN output P PNP output Electrode cartridge type / Electrode needle material Symbol Electrode cartridge type Electrode needle material - Tungsten Rapid elimination C Silicon of static electricity S Stainless steel J Tungsten Low maintenance K Silicon Product Recommendation Stocked items for fast delivery IZS3-300P IZS3-380P IZS3-6P IZS3-00P IZS3-260P IZS3-500P IZS3-780P IZS3-900P Related Products Series IZD - Electrostatic Sensor - www.smc.eu Series IZE - Electrostatic Monitor - www.smc.eu Series IZH - Handheld Electrostatic Meter - www.smc.eu Series AF - Main Line Filter - page 082 Series AM - Mist Separator - page 7 Series AR - Air Regulator - page 084 Series KA - Antistatic One-touch Fittings - www.smc.eu Series TAS/TAU - Antistatic Tubing - www.smc.eu For more product options and details see our specific catalogues or on-line information.
268 Series IZS3 / Bar Type Accessories Feedback sensor IZS3-DF Autobalance sensor [High-precision type] IZS3-DG Autobalance sensor [Body-mounting type] IZS3-DE Connection cable A/B ( pc. each) Sensor bracket ( pc.) Hexagon socket head cap screw for sensor bracket (2 pcs.) Accessories Power cable IZS3-CP (3 m) IZS3-CPZ ( 0 m) Connection cable A/B for connecting autobalance sensor to the body For driving: IZS3-CF (2P) Electrode cartridge with rapid elimination of static electricity IZS3-NT (Material: Tungsten) IZS3-NC (Material: Silicon) IZS3-NS (Material: Stainless steel) Electrode cartridge with low maintenance IZS3-NJ (Material: Tungsten) IZS3-NK (Material: Silicon) AC adapter (00 to 240 VAC) IZS3-FP-X96EU For I/O signals: IZS3-CR (6P) End bracket / IZS3-BE Center bracket / IZS3-BM End bracket Center bracket Hexagon socket head cap screw M4 x 6 (4 pcs.) (Accessory) Note) The number of center brackets required, as listed below, depends on the bar length. Two end brackets are always required regardless of the bar length. Bar length [mm] 300, 380, 6, 780 00, 260, 500 900, 2300 End bracket 2 pcs. Note) The model number is for a single bracket. Quantity Center bracket None With pc. With 2 pcs. Sensor bracket / IZS3-BL (For mounting IZS3-DE on the body) Provided with 2 hexagon socket head cap screw for sensor bracket (2 pcs.) Hexagon socket head cap screw M3 x 2 (2 pcs.) (Accessoy) Sensor bracket
/ Bar Type Series IZS3 269 Specifications model Ion generation method Method of applying voltage Electricity discharge output Ion balance Note ) Fluid Air purge Operating pressure Connecting tubing O.D. Power supply voltage Sensing DC mode Current Pulse DC mode consumption DC mode Electricity discharge stop signal Input signal Maintenance signal Static electricity removal completion signal Maintenance output signal Output signal Error signal Sensor monitor output Note 3) Effective distance of static electricity elimination Ambient temperature, Fluid temperature Ambient humidity Material Vibration resistance Shock resistance IZS3- (NPN specification) IZS3- P (PNP specification) Corona discharge type Sensing DC, Pulse DC, DC ±7000 V ±30 V (Stainless steel electrode needle: 00 V) Air (Clean and dry) 0.7 MPa or less Note 2) ø4 24 VDC ±0% 0 ma or less (While standing by: ma or less) Autobalance sensor [Body-mounting type] : 300 ma or less Autobalance sensor [High-precision type] : 0 ma or less When sensor is not used : 70 ma or less 70 ma or less Connected to GND (Voltage: 5 VDC or less, Current consumption: 5 ma or less) Max. load current: 00 ma Residual voltage: V or less (Load current at 00 ma) Max. applied voltage: 28 VDC Connected to +24 V (Voltage: Between 9 VDC and power supply voltage, Current consumption: 5 ma or less) Max. load current: 00 ma Residual voltage: V or less (Load current at 00 ma) Voltage output to 5 V (Connect a 0 kω or larger load.) 50 to 00 mm (Sensing DC mode: 0 to 00 mm) 0 to 50ºC 35 to 80% Rh (With no condensation) Cover of ionizer: ABS, Electrode needle: Tungsten, Monocrystal silicon, Stainless steel Durability 50 Hz Amplitude mm XYZ each 2 hours 0 G Standards CE marking, UL (CSA) compliant Note ) When the air purge is performed between a charged object and an ionizer at a distance of 300 mm Note 2) When the electrode cartridge with low maintenance is used, the operating pressure must be 0.05 MPa or more. Note 3) When the potential of a charged object is measured by a feedback sensor, the relationship between the potential being measured and the sensor monitor output voltage, and the detection range of the sensor vary depending on the sensor s installation distance. Sensor Specifications Ambient temperature Ambient humidity Case material Vibration resistance Shock resistance Weight Installation distance Sensor model IZS3-DF (Feedback sensor) ABS IZS3-DG IZS3-DE (Autobalance sensor [High-precision type]) (Autobalance sensor [Body-mounting type]) 0 to 50 ºC 35 to 85% Rh (With no condensation) ABS, Stainless steel ABS Durability 50 Hz Amplitude mm XYZ each 2 hours 0 G 2 g (Including cable) 0 g (Including cable) 0 g (Including cable) 0 to 50 mm (Recommended) For more product options and details see our specific catalogues or on-line information.
270 Series IZS3 / Bar Type / IZS3- - 4 L 4 6 36 9 4 KJH04-M5-X34 30 7 52 58 6 Balance adjustment trimmer Frequency selection switch Maintenance level selection switch Electrode cartridge Bar length [mm] 300, 380, 6, 780 00, 260, 500, 900, 2300 Fitting M-5P-X2 KJH04-M5-X34 Note) Note) Plug (M-5P-X2) pc. is shipped together. 4 x M4 x 0.7 depth 5 (For mounting, opposite side: Same) 25 80 x (n-) 70 9.6 0 25 Electrode cartridge n (Number of electrode cartridges), L Dimension Part no. IZS3-300 IZS3-380 IZS3-6 IZS3-780 IZS3-00 IZS3-260 IZS3-500 IZS3-900 IZS3-2300 n 3 4 7 9 3 5 8 23 28 L[mm] 300 380 6 780 00 260 500 900 2300
/ Bar Type Series IZS3 27 End bracket / IZS3-BE IZS3- - full length (L) 2 (3) (33) 3 22 4.5 When mounted outside in 2 X 5.4 32 2 27 27 33 22 6.5 00 83 27 00 2 27 Hexagon socket head cap screw M4 x 6 (Accessory) Angle adjustable (90º) Horizontal Installation Downward Installation 94 32 26 Center bracket / IZS3-BM 2 M5 screw for mounting IZS3- - Angle adjustable full length (L) 39 24 40 5 23 4 3 5.4 8 Note) Number of center brackets included in a model with brackets. Bar length [mm] 300, 380, 6, 780 00, 260, 500 900, 2300 Center bracket None With pc. With 2 pcs. For more product options and details see our specific catalogues or on-line information.
272 Series IZS3 / Bar Type Feedback sensor / IZS3-DF Detection part 50.5 6 7 0 2 x R3.3 7.7 60 4 6 SMC 3 0.5 8.8 ø0.2 8.8 500 3500 6.6 0.5 6.5 7.8 ø0.2 3 Head part 2 x ø3.4 2 x ø3.4 Amplifier part 3 9 58 87.5 25 ø0.2 ø4.8 5 69 78 8 23 ø4.8 Autobalance sensor [High-precision type] / IZS3-DG 5 2 7 7.7 60 6 4.5 4 Detection part 2 x ø6.6 deep counterbored hole, depth 5.7 (Height of screw seating surface: 8.8) ø0.2 7.8 8.8 ø0.2 3 2 x ø3.4 Head part 2 x ø3.4 Amplifier part 0.2 0.2 95 98 ø6.6 500 ø4.8 5 69 78 3500 8 23 ø4.8 Power supply cable / IZS3-CP L 60 7 Model IZS3-CP IZS3-CPZ L[mm] 3000 0000 (6.2) 3 (Red) 2
NT IZS3-NT / Bar Type Series IZS3 273 Autobalance sensor [Body-mounting type] / IZS3-DE Ion balance adjustment trimmer 6P modular connector (for connecting ionizer) 2P modular connector (for connecting ionizer) 30 2P modular connector (for power supply) 6.5 6.5 97 84 35 8.8 48 When mounting on the ionizer Connection cable B (6P) IZS3-CR (Included with IZS3-DE) Connection cable A (2P) IZS3-CF (Included with IZS3-DE) 2Xø3.4 End bracket IZS3-BE IZS3 (42) Hexagon socket head cap screw M4X6 (Included with IZS3-BE) Sensor bracket IZS3-BL (Included with IZS3-DE) Power cable IZS3-CP Autobalance sensor IZS3-DE Hexagon socket head cap screw M3X2 Included with IZS3-BL (5) (35) Connection cable A (2P) / IZS3-CF 230 (Tolerance %) 2 2 Connection cable B (6P) / IZS3-CR 4.8 230 +60 0 6 5 6 Sensor bracket / IZS3-BL 4 48 35 4.5 34 84 00 0 For more product options and details see our specific catalogues or on-line information.
274 Series IZF0 / Fan Type /Fan Type Series IZF0 Air supply free. Portable device. Compact design (80 x 0 x 39 mm) and lightweight (280 g). Two types available: - Fast deionizing type:.5 seconds deionizing time. - Low noise type: 29 db(a), (Measured at a distance of 300mm from the workpiece). Alarm function: high-voltage error, electrode needle contamination detector. How to Order IZF0 Fan type Air flow 0.66 m 3 /min L 0.46 m 3 /min P Output NPN output PNP output Product Recommendation IZF0-P Stocked items for fast delivery IZF0-LP Related Products Series IZD - Electrostatic Sensor - www.smc.eu Series IZE - Electrostatic Monitor - www.smc.eu Series IZH - Handheld Electrostatic Meter - www.smc.eu Specifications model IZF0- IZF0-L- IZF0-P- IZF0-LP- Ion generation method Corona discharge type (DC) Power supply voltage 24 VDC ±0% Output NPN open collector output PNP open collector output Air flow 0.66 m 3 /min 0.46 m 3 /min 0.66 m 3 /min 0.46 m 3 /min Power consumption 6. W or less 3.7 W or less 6.6 W or less 4.8 W or less Ambient temperature Operation: 0 to 50 C, Storage: -0 to 60 C Ambient humidity Operation, Storage: 35 to 80% RH (No condensation) Weight 280 g (With bracket: 360 g) Installation distance and static electricity elimination time (000 V 00 V) Static electricity elimination time [sec] 25 5 0 5 IZF0-L IZF0 0 0 300 600 900 0 500 Installation distance [mm] Accessories Part number IZF0-CP IZF0-CPZ IZF0-CG2EU IZF0-B IZF0-A Description Power supply cable (3 m) Power supply cable (0 m) Power supply cable with AC adapter Bracket Cartridge case
/ Fan Type Series IZF0 275 ø30 ø3 x 5.5 through 5.5 5.5 (39) 96 82 80 79 0 2 03 96.5 94 37 50 (46) 23 30 30 Holding bolt 60.3 6.5 46 Bracket Power switch LED indicators Ion balance adjustment trimmer Without bracket (39) 4 33.5.5 Variable angle 90 66.8 2.5 25 24.5 R76 ø25 R4 (84) 2 x ø3.5 depth 4 x M4 x 0.7 depth 6 (Mounting thread) 9.5.9 (Power switch) 37.5 6 (With connector plugged in) Wiring Pin No. 2 3 4 Lead wire (colour) Brown Blue Green Purple Description 24 VDC GND F.G. Emergency output For more product options and details see our specific catalogues or on-line information.