BUCKET ELEVATORS
NORSTAR BUCKET ELEVATORS CUSTOM DESIGN Norstar Bucket Elevators are designed to provide you with maximum throughput and long lasting performance for a wide variety of bulk material handling applications. At Norstar we build to fit your application and meet your specific needs. Our Bucket Elevators feature custom options including: multiple finishes, distributor models, fall protection and platforms. Finish Options Norstar offers a range of finishing options to suit your specific application and provide long lasting protection. Powder Coat Paint Finish Galvanized Stainless Steel Norstar also offers custom color options on request. Distributors Norstar offers a wide range of Distributor options including: UP TO 20,000 BPH (500 METRIC TONS PER HOUR)* *capacities are subject to product and product condition ELEVATOR HEAD ASSEMBLY Heavy-Duty structural frame Designed to promote minimal product impact Split hood design for easy access and serviceability Pulley, crowned face with vulcanized rubber Dust protection at all shaft openings Heavy-Duty pillow block bearings Ball bearings on units with up to 30 pulleys Double tapered roller bearings on units with 36 pulleys and up Belt Tensioner with screw adjustment Inspection ports for belt tracking UHMW seals at shafts Shaft-Mounted DODGE Gearbox Double or Triple Ply GOODYEAR belting ELEVATOR TRUNKING ASSEMBLY Heavy-Duty flanges that are laser aligned and jigged Service inspection ports with hinged doors Track welded seams that ensure dust and weather protection Double legged trunking assemblies Available in 4 ga, 2 ga and 0 ga material ELEVATOR BOOT ASSEMBLY 3D CAD designed and assembled Heavy-Duty structural frame Threaded rod belt adjustment Winged easy clean pulley Heavy-Duty pillow block bearings UHMW seals at shafts Easy cleanout doors to minimize contact with concrete Manual or Electronic Controlled Multiple outlet models Spouting sizes from 6 to 20 Flatback or full-round options Powder Coat Paint Finish Fall Protection & Platforms LADDERS & CAGES Available in 5 and 0 sections Sized for easy access Designed to assemble with work, rest and distributor platforms Safety cages are standard and built to meet OSHA regulations PLATFORMS Head work platform, distributor platform and rest platforms available. Work platform hinged manway door Expanded metal safety grating floor Includes full handrails Built to OSHA standards Buckets High Density Polyethelene Urethane Nylon Steel Stainless Steel Vented cups available Low Profile cups available Support Towers Handling & Storage Systems Norstar offers support towers and catwalks for various elevator heights. Combine Norstar bucket elevators, conveyance systems and smoothwall storage solutions to create fully operational handling and storage systems. Our design team is capable of building a system according to your specifications and needs. Contact your Norstar sales rep for more info.
Bucket Elevator Monitoring System (optional) Combined belt alignment, belt speed, continuous bearing temperature, pulley alignment and plug condition monitor Bearing and Surface Temperature Sensor fits into existing grease zerk fittings on a bearing and is fitted with a grease nipple to allow bearing lubrication without removing the sensor. 2 Speed Switch provides alarm and shutdown signals at 0% and 20% underspeed. 3 Plug Sensor detects level or plug situations for bulk granular solids. 4 Belt Alignment Sensor detects tracking and misalignment problems on belts. 4 3 4 2
ADDITIONAL ACCESSORIES Transitions Available in Square to Square, Square to Round and Round to Round models Available from 4 to 24 sizes Splitter Valves Available in 2-way, 2-way Offset, and 3-way orientations Available in 6, 8, 0, 2, 4 and 6 sizes Heavy duty over-center spring Cables also available Clam Gate Available in 0 and 2 sizes Heavy duty over-center spring Also Available: 22.5 Round Elbows available from 4 to 24 sizes Round Clamp Bands available from 4 to 24 sizes
LONG LASTING PERFORMANCE Series 600 Pulley Dia ( ) BPH FPM RPM Bucket Size ( ) Bucket Spacing ( ) Belt Width ( ) Trunking Size ( ) Max Height Head Shaft Dia Boot Shaft Dia Trunking Gauge (over 50 ) Gauge of Boot / Head 6 00 77 5 4 x 3 2 5 7 x 6 00 /4 /4 2 0 / 2 6 40 77 5 4 x 3 8 5 7 x 6 00 /4 /4 2 0 / 2 6 200 269 75 4 x 3 8 5 7 x 6 00 /4 /4 2 0 / 2 6 400 269 75 4 x 3 4 5 7 x 6 00 /4 /4 2 0 / 2 800 200 600 2400 3000 8 500 349 75 4 x 6 2 7 9 x 7 00 /2 /4 2 0 / 2 8 700 230 5 4 x 6 6 7 9 x 7 00 /2 /4 2 0 / 2 8 000 349 75 4 x 6 6 7 9 x 7 00 /2 /4 2 0 / 2 2 000 620 92 5 x 7 2 8 0 x 8 00 3/4 /4 2 0 / 2 2 500 565 75 5 x 7 6 8 0 x 8 00 3/4 /4 2 0 / 2 2 2000 620 92 5 x 7 6 8 0 x 8 00 3/4 /4 2 0 / 2 6 2500 43 95 9 x 6 7.75 0 0 x 6 200 3 7/6 /6 4 (2) 0 / 0 6 3000 43 95 0 x 6 7 0 x 6 200 3 7/6 /6 4 (2) 0 / 0 24 3000 47 73 x 6 9.5 2 0 x 6 200 3 7/6 2 4 (2) 0 / 0 24 4000 47 73 x 6 7 2 0 x 6 200 3 5/6 2 4 (2) 0 / 0 24 5000 47 73 x 6 LP 5.25 2 0 x 6 200 3 5/6 2 4 (2) 0 / 0 30 4000 537 67 x 6 9.5 2 2 x 8 200 3 5/6 2 7/6 4 (2) 0 / 0 30 5000 537 67 3 x 6 7.5 4 2 x 8 200 4 7/6 2 7/6 4 (2) 0 / 0 30 6000 537 67 3 x 6 LP 5.75 4 2 x 8 200 4 7/6 2 7/6 4 (2) 0 / 0 36 6000 64 64 3 x 7 0.5 4 2 x 8 200 4 7/6 2 5/6 2 (0) 0 / 0 3600 36 7000 64 64 3 x 7 9 4 2 x 8 200 4 7/6 2 5/6 2 (0) 0 / 0 36 8000 64 64 3 x 7 8 4 2 x 8 200 4 5/6 2 5/6 2 (0) 0 / 0 36 0000 64 64 4 x 7 LP 6 5 2 x 8 200 5 /2 2 5/6 2 (0) 0 / 0 4200 4800 42 0000 670 60 6 x 8 2.25 7 4 x 22 200 5 /2 3 7/6 2 (0) 7 / 7 42 2000 670 60 6 x 8 0 7 4 x 22 200 5 /2 3 7/6 2 (0) 7 / 7 48 5000 73 56 20 x 8 2 4 x 26 200 6 7/6 3 5/6 0 (0) 7 / 7 48 8000 73 56 20 x 8 9 2 4 x 26 200 6 5/6 3 5/6 0 (0) 7 / 7 48 20000 73 56 20 x 8 LP 7.5 2 4 x 26 200 6 5/6 3 5/6 0 (0) 7 / 7 Durable Design and Build Wide Range of Custom Options to Fit Your Application Up to 20,000 BPH (500 Tons Per Hour)* *capacities are subject to product and product condition Distributed By: PO Box 9 RR, Morris, Manitoba R0G K0 Toll Free: (855) 746-8200 Phone: (204) 746-8200 Fax: (204) 746-8074 e-mail: info@norstarindustries.ca www.norstarindustries.ca